B&B Electronics QS-PCIE-100
Contents
1. click Next 3 Check Specify a location uncheck the other boxes then click Next May 07 3 MN2000000068 4 Insert the Driver CD type in the following path D Drivers PCIExpress QS PCIE 100 2000 then click OK Change D to match your CD ROM driver letter 5 Click Next and Finish 6 Restart Windows to complete the installation For Windows XP 1 At the Found New Hardware Wizard select Install from a list or specific location Advanced then click Next 2 Insert the Driver CD check Include this location in the search uncheck the other box type in the following path D Drivers PCIExpress QS PCIE 100 XP then click OK Change D to match your CD ROM drive letter 3 Ifthe Hardware Installation window pops up click Continue Anyway then Finish Our driver has been thoroughly tested for stability and compatibility 4 Repeat steps 1 3 five more times Restart Windows to complete the installation For Windows Server 2003 1 At the Found New Hardware Wizard select Install from a list May 07 4 MN2000000068 or specific location Advanced then click Next Insert the Driver CD check Include this location in the search uncheck the other box type in following path D Drivers PCIExpress QS PCIE 100 2003 then click OK Change D to match your CD ROM drive letter If the Hardware Installation window pops up click Continue Anyway then Finish Our driver has been thoroughly tested for stability and compatibi2. QS PCIE 100 User Manual Ver 1 00 All brand names and trademarks are properties of their respective owners May 07 1 MN2000000068 Features and Benefits Features Compliant with PCI Express Base Specification 1 0a Supports 4 x UART serial port Built in 16C550 compatible UART with 16 byte transmit receive FIFO Data transfer rate up to 115200bps Bus PCI Express X1 Connectors 4 x DB9 male serial connectors Package Contents 1x QS PCIE 100 Card 1x Bracket with two DB9 male serial ports 1x Driver CD System Requirements Windows 2000 XP Server 2003 Vista PCI Express enabled system with an available PCI Express slot May 07 2 MN2000000068 Hardware Installation 1 Turn Off the power to your computer 2 Unplug the power cord and remove your computer s cover 3 Remove the slot bracket from an available PCIe slot 4 To install the card carefully align the card s bus connector with the selected PCIe slot on the motherboard Push the board down firmly 5 Connect the system power source to the board s power connector 6 Replace the slot bracket s holding screw to secure the card 7 Replace the computer cover and reconnect the power cord Driver Installation Please make sure the board is installed before proceeding with driver installation For Windows 2000 1 At the Found New Hardware Wizard click Next 2 Select Search for a suitable driver for my device recommended and
3. lity Repeat steps 1 3 five more times Restart Windows to complete the installation For Windows Vista l 5 At the Found New Hardware Wizard select Locate and install driver software recommended Click on I don t have the disc Show me other options Select the option Browse my computer for driver software advanced Insert the driver CD check Include subfolders type in D Drivers PCIExpress QS PCIE 100 Vista32 then click Next Change D to match your CD ROM drive letter If the system prompts the user informing the drivers are not May 07 5 MN2000000068 6 signed select the option Install this driver software anyway Click on Close to complete the driver installation To Verify Windows Driver Installation 1 Right click My Computer then click Manage Click Device Manager 2 Click on the plus sign in front of Ports COM amp LPT four MosChip PCI Serial Port should be displayed 3 Double click Multifunction adapters MosChip PCI Multi l O Controller should be displayed Change COM Port Number Some serial devices need a specific COM port in order to work If your serial device works properly do not change this setting For Windows 2000 XP Server 20003 Vista Installation From the Device Manager window double click Ports COM amp LPT then double click the MosChip PCI Serial Port you want to change Click the Settings tab and click Advanced Click the down arrow that is next t
4. o the COM Port Number box select a COM port that is not in use then click OK May 07 6 MN2000000068 4 Click OK then close Device Manager to save the changes Follow steps 1 4 again to change the other three serial ports if needed May 07 7 MN2000000068
Download Pdf Manuals
Related Search