Revo REP3DC12-8-10
Contents
1. ARNING To reduce the risk of fire or electric shock do not expose this unit to rain or moisture This installation should be made by qualified service personnel and should conform to all local codes and in accordance with the National Electrical Codes For continuous protection against hazard replace only with same type and rating of fuse The power cord included with this power supply is intended for temporary testing purposes only Before testing ensure that the enclosure has been properly grounded as per local and National Electrical Codes This product must be installed by qualified personnel in accordance with all local and National Electrical Codes2. CCTV CAMERA amp ACCESSORY POWER SUPPLY REP3DC12 8 10 P31002 11 05 Primary Outputs Input 115VAC 60Hz 2 5 Amps wore Ae peru F EEn Ohr 2A 12VDC output Eight 8 individually fuse protected power eaa limited class 2 outputs oo cep 10 Amps total continuous supply current il see Filtered and electronically regulated outputs H H a i k Surge protection Ach Output fuses are rated at 3 Amps Main fuse is rated at 10 Amps ornai S AC input and DC output LED indicators see S oes RED Spare fuses included Installation Instructions 1 2 3 4 Mount the REP3DC12 8 10 in desired location Connect green lead to earth ground Connect AC 115VAC 60Hz to the black and white leads of the transformer Use knockout adjacent to the transformer 1 4 spacing must be provided between AC input wiring and all other circuits Adjust output voltage using trim pot on the board prior to connecting CCTV devices Connect each DC CCTV cameras to terminal pairs marked thru on P3DB 4 board carefully observing correct polarity NOTE It is important to measure output voltage before connecting devices This helps avoid potential damage Terminals marked are positive and terminals marked are negative 5 Green LED will illuminate when unit is powered 6 Upon completion of wiring secure enclosure door with catch W
Download Pdf Manuals
Related Search