Peerless DS495
Contents
1. d washer head socket pin screw 4mm security allen wrench cable tie M5 x 10 mm type F socket pin screw ITO mmoowp p oo NAS RA 124 1139 124 1141 124 1140 520 1320 510 1060 560 9646 560 9711 520 1164 Parts may appear slightly different than illustrated 20f5 ISSUED 03 05 09 SHEET 125 9053 1 Installation to PLCM 2 Not Included A WARNING e Installer must verify that the supporting surface will safely support the combined weight of all attached equipment and hardware Hold back of computer box A against the back of PLCM 2 not included Line up locator hole of computer box A with screw of PLCM 2 so that the head of screw is visible as shown in fig 1 1 Secure with four 10 x 1 2 TEK phillips screws D as shown in fig 1 2 Skip to step 2 LOCATER HOLE SCREW PLCM 2 NOT INCLUDED fig 1 1 EXTENSION COLUMN PLCM 2 NOT INCLUDED 30f5 ISSUED 03 05 09 SHEET 125 9053 1 Installation to Supporting Surface A WARNING e Installer must verify that the supporting surface will safely support the combined weight of all attached equipment and hardware There are eight mounting places for the alternate support brackets B as shown in fig 1 3 Determined the locations for alternate support brackets B according to supporting surface Using allen wrench F fasten two or four alternate support brackets B to computer box A with two M5 x 10 mm type F s2. ocket pin screws H for each alternate support bracket B Use installer supplied screws fasteners to attach alternate support brackets B to supporting surface NOTE For each alternate support brackets B two screws must be used for attachment to supporting surface i sasan sy PN A oO o 0 o o fig 1 4 4of5 ISSUED 03 05 09 SHEET 125 9053 1 Attach power supply and mini mac to computer box A using cable ties G s A POWER SUPPLY A SE MINI MAG Slide tabs of box cover C into slots of computer box A Using allen wrench F secure box cover C with two M4 x 10 mm serrated washer head socket pin screws E NOTE Box cover C can be oriented left or right 5of5 ISSUED 03 05 09 SHEET 125 9053 1 2007 Peerless Industries Inc All rights reserved All other brand and product names are trademarks or registered trademarks of their respective owners
3. peerless Installation and Assembly Custom Mac Mini PC Holder Model DS495 Maximum Load Capacity 10 Ib 4 5 kg NOTE Read entire instruction sheet before you start installation and assembly A WARNING Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet If you have any questions regarding any of the instructions or warnings please call Peerless customer care at 1 800 865 2112 This product should only be installed by someone of good mechanical aptitude has experience with basic building construction and fully understands these instructions Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard ware and components Never exceed the Maximum Load Capacity Always use an assistant or mechanical lifting equipment to safely lift and position equipment Tighten screws firmly but do not overtighten Overtightening can damage the items greatly reducing their holding power 3215 W North Ave Melrose Park IL 60160 800 865 2112 or 708 865 8870 Fax 708 865 2941 www peerlessmounts com Before you begin make sure all parts shown are included with your product Parts may appear slightly different than illustrated Parts List Description computer box alternate support bracket box cover 10 x 1 2 TEK phillips screw M4 x 10 mm serrate
Download Pdf Manuals
Related Search