Home

Panasonic DMP-BDT220

1. HDAVI Control E Unit Settings Press OK to show the following settings gt Front Panel Display Changes the brightness of the unit s display e f Automatic is selected the display is set to bright and only dimmed during playback gt Edit User Information Change the user information registered in the HOME menu E Quick Start Speed of startup from standby mode is increased e When set to On the internal control unit will be powered and the idle power consumption will increase so compared to when set to Off About the power consumption gt 39 E Remote Control Change the remote control code if other Panasonic products react to this remote control E Firmware Update gt 12 Press OK to show the following settings gt Automatic Update Check When this equipment remains connected to the Internet it will check for the latest firmware version when it is turned on and you can update it if necessary gt Update Now You can update the firmware manually if a firmware update is available E System Information Press OK to show the following settings gt Software Licence Information about the software used by this unit is displayed gt Firmware Version Information Display firmware version of this unit and wireless LAN module E DivX Registration You need this registration code to purchase and play DivX Video on Demand VOD conte
2. Batteries Mishandling of batteries can cause electrolyte leakage and may cause a fire e Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer e When disposing the batteries please contact your local authorities or dealer and ask for the correct method of disposal Do not mix old and new batteries or different types at the same time e Do not heat or expose to flame e Do not leave the battery ies in a car exposed to direct sunlight for a long period of time with doors and windows closed Do not take apart or short circuit e Do not recharge alkaline or manganese batteries Do not use batteries if the covering has been peeled off Remove batteries if you do not intend to use the remote control for a long period of time Store in a cool dark place Caution for AC Mains Lead For your safety please read the following text carefully This appliance is supplied with a moulded three pin mains plug for your safety and convenience A 5 ampere fuse is fitted in this plug Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 ampere and that it is approved by ASTA or BSI to BS1362 Check for the ASTA mark or the BSI mark on the body of the fuse If the plug contains a removable fuse cover you must ensure hat it is refitted when the fuse is replaced If you lose the fuse cover the plug must not be used until a
3. is set to On E Downmix Select the downmix system of multi channel to 2 channel sound Select Surround encoded when the connected equipment supports the virtual surround function e There is no effect on Bitstream via HDMI AV OUT and DIGITAL AUDIO OUT e The audio will be output in Stereo in the following cases AVCHD playback Playback of secondary audio including the button click sound VQT3V62 2 7 Settings E Audio Delay Synchronization between picture and sound is corrected by adjusting the delay time of the audio output jsp E 3D BD Video Playback Select the playback method of 3D compatible video software E 3D AVCHD Output Select the output method of 3D AVCHD videos E 3D Type Select the format of the connected TV Change the settings for 3D on the TV also when Side by side is selected E 3D Playback Message Set to display or hide the 3D viewing warning screen when playing back the 3D compatible video software E Manual Settings gt 25 E Graphic Display Level 3 gt 25 2 8 VQT3V62 Language E Soundtrack Preference Choose the language for audio e f Original is selected the original language of each disc will be selected e Enter a code gt 38 when you select Other E Subtitle Preference Choose the language for the subtitle e f Automatic is selected and the language select
4. replacement cover is obtained A replacement fuse cover can be purchased from your local dealer CAUTION IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMPERE SOCKET If a new plug is to be fitted please observe the wiring code as stated below f in any doubt please consult a qualified electrician IMPORTANT The wires in this mains lead are coloured in accordance with he following code Blue Neutral Brown Live As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red WARNING DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN YELLOW THIS PLUG IS NOT WATERPROOF KEEP DRY Before use Remove the connector cover How to replace the fuse The location of the fuse differ according to the type of AC mains plug figures A and B Confirm the AC mains plug itted and follow the instructions below Illustrations may dif
5. the play Authentication Type PSK order may differ or playback may not be possible WEP 64 bit 128 bit LASER Specification Class 1 LASER Product Continued on the next page VQT3V62 39 Reference l Audio information The audio output differs depending on which terminals are connected to the amplifier receiver and the settings on the unit gt 27 Digital Audio Output e The number of channels listed is the maximum possible number of output channels when connected to amplifier receiver compatible with the respective audio format Digital Audio Output Terminal Bitstream PCM BD Video HDMI AV Outputs using original 7 1ch PCM OUT audio DVD Video 5 1ch PCM Dolby Digital Down mixed 2ch OPTICAL DTS Digital Surround PCM 1 When BD Video Secondary Audio is set to On the audio will be output as Dolby Digital DTS Digital Surround or 5 1ch PCM 2 The maximum possible number of Dolby sound is 5 1ch PCM 8 The audio output is amplified from 5 1ch or 6 1ch to 7 1ch depending on the DTS Inc specifications 40 VQT3V62 Precautions of wireless LAN connection The following limits are in place regarding the usage of this unit or Wireless LAN adaptor You must be aware of these limits before using these devices Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits o
6. 4 AVC Pop up Menu lt gt Ove 2 Select an item and change the settings To exit the screen Press OPTION Regarding Language gt 38 Operation Menu E Soundtrack Show or change the soundtrack E Audio channel Select the audio channel number E Subtitle Change the subtitle settings E Angle Select the number of the angle E Repeat Play Only when the elapsed time is being displayed on the unit s display Select the item that you want to repeat e The items displayed differ depending on the type of media e Select Off to cancel E Random Select whether or not to play random E Start Slideshow Start the slideshow E Status Show the status messages E Rotate RIGHT E Rotate LEFT Rotate the still picture E Wallpaper Set the still picture to the wallpaper of HOME menu gt 14 E Icon Registration Set the still picture as your user icon gt 15 E Video The recording method of original video appears Playback E Primary Video The recording method of original primary video appears E Secondary Video Select on off of images The recording method of original video appears ideo e During search slow motion v dD or frame by frame only the S primary video is displayed 3 i n Soundtrack Select on off of audio and the language VQT3V62 2 3 E Control Panel Display the Control Panel
7. 6682 K E 7579 Sund 8385 DUNE i PONER Bulgarian 6671 Kurdish 7588 Swahili 8387 B 7 7789 Laotian 7679 Swedish 8386 BYENS 6669 in 7665 Tagalog 8476 FERGUSON 10 34 PYE 05 Cambodian 7577 Latvian Lettish 7686 Tajik 8471 FINLUX 61 RADIOLA 05 Catalan 6765 Lingala 7678 Tamil 8465 Chinese 9072 Lithuanian 7684 Tatar 8484 FISHER 21 SABA 10 carseat 6779 Macedonian 7775 Telg 8469 FUJITSU 53 SALORA 26 Croatian 7282 Malagasy 7771 Thai 8472 Czech 6783 Malay 7783 Tibetan 6679 FUNAI 63 67 SAMSUNG 32 42 43 65 68 Danish 6865 ME 7776 Tigrinya 8473 GOLDSTAR 05 50 51 SANSUI 05 Dutch 7876 Maltese 7784 Tonga 8479 English 6978 Maori 7773 Turkish 8482 TA A ee ESS 6979 Marathi 7782 TMS 8475 Estonian 6984 Moldavian 7779 Twi 8487 GRUNDIG 09 SEG 05 69 75 76 77 78 Faroese 7079 Mongolian 7778 WeraintarE 8575 Fiji 7074 Nauru 7865 Urdu 8582 HITACHI 05 22123 40 41 SELECO 05 25 Finnish 7073 Nepali 7869 Uzbek 3590 French 7082 N ian 7879 Viet 8673 IRRADIO 30 SHARP 18 Frisian 7089 one 7982 Volap k S 8679 ITT 25 SIEMENS 09 Galician 7176 Pashto Pushto 8083 Welsh 6789 Georgian 7565 Persian 7065 Wolof 8779 NC 17130 39170 SINUDYNE 05 German 6869 Polish 8076 Xhosa 8872 KDS 52 SONY 08 Greek 6976 Portuguese 8084 Yiddish 7473 KOLIN 45 TCL 31 33 66 67 69 Greenlandic 7576 Punjabi 8065 Yor ba 8979 KONKA 62 TELEFUNKEN 10111112113714 Guarani 7178 Quechua 8185 Zulu 9085 LG 05 50 51 TEVION 52 LOEWE 07 46 THOMSON
8. E Disc and card handling precautions e Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc e Do not attach labels or stickers to discs e Do not use disc cleaning sprays benzine thinner static electricity prevention liquids or any other solvent e Clean any dust water or foreign matter from the terminals on the rear side of the card e Do not use the following discs Discs with exposed adhesive from removed stickers or labels rented discs etc Discs that are badly warped or cracked Irregularly shaped discs such as heart shapes E To dispose or transfer this unit The unit may keep the user settings information in the unit If you discard this unit either by disposal or transfer then follow the procedure to return all the settings to the factory presets to delete the user settings gt 32 To return all settings to the factory preset The operation history may be recorded in the memory of this unit Playable media Device Disc markings Device types Contents format BD Video Video BD BD RE Video JPEG MPO Blu ray Dis BD R Video DivX MKV DVD DVD Video Video VIDEO DYD DVD R naz Video AVCHD Divx MKV JPEG MPO DVD FLAC MP3 WAV EXD DVD R DL RDL lt a DVD RW rw Video AVCHD R RW R DL Music CD Music CD DA DivX MKV JPEG enna MPO FLAC MP3 Music CD DA WAV sa EF xe
9. Press OK to select Setup 3 Select Player Settings 4 Select an item and change the settings To exit the screen Press HOME Picture E Picture Mode gt 24 E Picture Adjustment 3 gt 24 E Chroma Process amp gt 24 E Detail Clarity gt 24 E Super Resolution gt 24 E HDMI Output Press OK to show the following settings gt HDMI Video Format The items supported by the connected devices are indicated on the screen as gt When any item without gt is selected the images may be distorted e f Automatic is selected the best suited output resolution to the connected television is automatically selected e To enjoy high definition video up converted to 1080p you need to connect the unit directly to 1080p compatible HDTV High Definition Television If this unit is connected to an HDTV through other equipment the other equipment must also be 1080p compatible gt 24p Output When this unit is connected to a TV supporting 1080 24p output using an HDMI cable movies and other material recorded at 24p are output at 24p e When playing DVD Video set to On and then set 24p in Picture Settings gt 24 to On e When BD Video images other than 24p are played images are output at 60p e 24p A progressive image recorded at a rate of 24 frames per second motion picture film Many BD Video
10. SD Memory Card from 8 MB to 2 GB SDHC Memory Card from 4 GB to 32 GB SDXC Memory Card 48 GB 64 GB Compatible with both mini and micro types AVCHD AVCHD 3D MP4 MPEG2 JPEG MPO USB devices up to 2 TB DivX MKV MP4 MPEG JPEG MPO FLAC MP3 WAV e See pages 6 and 39 for more information on the types of content that can be played VQT3V62 5 Getting started E Discs that cannot be played by this unit e DVD RAM e Video CD and Super Super Audio CD Video CD e Photo CD e WMA discs e DVD Audio e DivX Plus HD discs e HD DVD E Region management information BD Video This unit can play BD Video discs supporting the region code B This unit can play DVD Video discs supporting the region number 2 or ALL Example A amp E Finalize DVD R RW R DL R RW R DL and CD R RW recorded by a recorder etc needs to be finalized by the recorder to play on this unit Please refer to the recorder s instructions E BD Video This unit supports high bit rate audio Dolby Digital Plus Dolby TrueHD DTS HD High Resolution Audio and DTS HD Master Audio adopted in BD Video e If Dolby D Dolby D Dolby TrueHD is set to PCM the maximum possible number of Dolby sound is 5 1ch PCM 27 E 3D e 3D videos and 3D still pictures can be played back when this unit is connected to a 3D compatible TV using a High Speed HDMI Cable e 2D video can be enjoyed
11. at the same time for more than 5 seconds 00 RET is displayed on the unit s display Repeatedly press P right on the remote control or I on the unit until 04 PRG is displayed on the unit s display Press and hold OK on the remote control or 4 OPEN CLOSE on the unit for at least 3 seconds Set the item again gt 26 When Dolby Digital Plus Dolby TrueHD and DTS HD audio are not output in bitstream select Yes in Default Settings and make proper settings gt 31 The unit and television are using different video systems While the unit is on press and hold OK the yellow button and the blue button on the remote control at the same time for more than 5 seconds 00 RET is displayed on the unit s display Repeatedly press P right on the remote control or 0 1 on the unit until 05 P N is displayed on the unit s display Press and hold OK on the remote control or 4 OPEN CLOSE on the unit for at least 3 seconds The system switches from PAL to NTSC or vice versa The system used on the disc doesn t match your television PAL discs cannot be correctly viewed on an NTSC television This unit can convert NTSC signals to PAL60 for viewing on a PAL television 26 NTSC Contents Output When 3D BD Video Playback in the Setup menu is set to Automatic images may not be output depending on the connection method After remov
12. displayed press the red button to switch the view of playback contents Enjoying BD Live With BD Live discs you can enjoy bonus contents that use Internet access For this BD Live function insertion of an SD card is necessary along with Internet connection Playback 1 Perform network connection and settings gt 10 11 2 Insert an SD card with 1 GB or more free space e The SD card is used as the local storage 3 Insert the disc E Deleting data Formatting SD cards Select SD Card Management in the HOME menu gt 14 then select BD Video Data Erase or Format SD Card and press OK Ba The usable functions and the operating method may vary with each disc please refer to the instructions on the disc and or visit their website BD Live Internet Access may need to be changed for certain discs gt 30 VQT3V62 1 7 Slideshow Play a slideshow of photos and make various settings during the playback 1 Insert the media 2 Select Photos 3 Select an item and press the green button The following items can be set Start the slideshow Start You can display still pictures in Slideshow the selected folder one by one at a constant interval Interval Change the display interval Transition Select the effect when sliding Effect pictures Set whether to repeat the Repeat Play sideshow Set whether to play background music e F
13. e f the video is disrupted when Auto is selected select either Video or Film depending on the material to be played back E 24p Movies and other material recorded on DVD Video at 24p are output at 24p Only when you have selected On in 24p Output 26 and play discs recorded at a rate of 60 fields per second e This may not work with the PAL contents E Screen Aspect Switch the screen mode E Reset to Default Picture Settings Return picture settings to the factory preset Sound Settings E Sound Effects Select the sound effect e Night Surround Enjoy a movie with powerful sound even when the volume is kept low at night The audio is set in such a way that it can be heard easily e Re master This feature gives you brighter sound by increasing the high frequency portion of the audio Discs recorded at 48 kHz or less Recommended setting Re master 1 Pop and rock Re master 2 Jazz Re master 3 Classical E Dialogue Enhancer 3 The volume of the centre channel is raised to make dialog easier to hear 3D Settings These settings are also displayed by pressing E E Signal Format Original Keep original picture format F 3 3D picture format comprising gide ty elds of left and right screens 2D to 3D Converts 2D pictures to 3D effect E 3D Picture Mode Play back pictures with normal Normal 3D effect
14. lead Do not handle the plug with wet hands e Do not use a damaged mains plug or socket outlet Install this unit so that the AC mains lead can be unplugged from the socket outlet immediately if any problem occurs SD card Keep the Memory Card out of reach of children to prevent swallowing 2 VQT3V62 Hold onto the mains plug body when disconnecting the plug CAUTION Unit This unit utilizes a laser Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Do not place sources of naked flames such as lighted candles on this unit e This unit may receive radio interference caused by mobile telephones during use If such interference occurs please increase separation between this unit and the mobile telephone e This unit is intended for use in moderate climates Placement Place this unit on an even surface To reduce the risk of fire electric shock or product damage Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this unit s ventilation openings with newspapers tablecloths curtains and similar items Do not place the unit on amplifiers receivers or equipment that may become hot The heat can damage the unit e Do not expose this unit to direct sunlight high temperatures high humidity and excessive vibration
15. temporarily or permanently without notice Therefore Panasonic will make no warranty for the content or the continuity of the services e All features of websites or content of the service may not be available Some content may be inappropriate for some viewers Some content may only be available for specific countries and may be presented in specific languages Playback VQT3V62 1 9 Home Network feature Playing back contents on the DLNA server You can share photos videos and music stored in the DLNA Certified media server PC with Windows 7 installed smartphone etc connected to your home network and enjoy the contents with this player You can also enjoy viewing the video and photos recorded in Panasonic DLNA compatible recorders DIGA Refer to our website about the sales area etc gt 21 Preparation Perform network connection 10 and network settings gt 11 of this unit Perform Home Network settings of the connected equipment When connected to other than DIGA Add the contents and folder to the libraries of the Windows Media Player or the smartphone etc e Playlist of Windows Media Player can play back only the contents that are stored in the libraries When connected to DIGA Register this unit to your DIGA 2 0 VQT3V62 Press HOME Select Network Select Home Network Select DLNA Client e The list can be updated by pressin
16. the face pictures of the personalized users and displays the results 4 Press OK e To redo the facial recognition press RETURN E Using registered smartphones When the unit is turned on using the registered smartphone the user who registered the smartphone will automatically be selected e Perform the Remote Device Settings gt 29 Playback an e To use smartphones as a remote control installation of dedicated software is required For more details refer to the following website http panasonic jp support global cs This site is in English only VQT3V62 1 5 Playback 1 Insert the media Playback starts depending on the media 2 Select the item to play and press OK Repeat this procedure if necessary aa Signal from PAL discs is output as PAL Signal from NTSC discs is output as NTSC or PAL60 You can select NTSC or PAL60 in NTSC Contents Output for NTSC discs gt 26 DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED Press lISTOP when you have finished playback to protect the unit s motor your television screen and so on DivX and MKV Successive play is not possible It is not possible to play back AVCHD and MPEG2 video which have been dragged and dropped copied and pasted to the media e To save on electricity the unit is turned off automatically if there is no button operation for about 30 minutes when not playing back such a
17. the software categorized as 3 and 4 are copyrighted by several individuals Please refer to the copyright notice of those individuals at http panasonic net avc oss bdplayer AWBPP12 html The GPL LGPL software is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE At least three 3 years from delivery of products Panasonic will give to any third party who contacts us at the contact information provided below for a charge no more than our cost of physically performing source code distribution a complete machine readable copy of the corresponding source code covered under GPL v2 LGPL v2 1 Contact Information cdrequest bdplayer gg jp panasonic com Source code is also freely available to you and any other member of the public via our website below http panasonic net avc oss bdplayer AWBPP12 html For the software categorized as 5 includes as follows 1 This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http Awww openssl org 2 This product includes software developed by the University of California Berkeley and its contributors 3 FreeType code 4 The Independent JPEG Group s JPEG software 1 MS WMA This product is protected by certain intellectual property rights of Microsoft Corporation and third parties Use or distribution of such technology outside of this p
18. up menu Press TOP MENU or POP UP MENU Select the item and press OK Show the status messages While playing press STATUS The status messages give you information about what is currently being played Each time you press STATUS the display information may change or will disappear from the screen e Depending on media and contents the display may change or may not appear e g BD Video mT C1 0 05 14 Play 0 20 52 T Title C Chapter PL Playlist Elapsed time in the title Current position Total time e g JPEG Date 11 12 2007 Size 500 x 375 Manufacturer Equipment Enjoying 3D video and photos Preparation Connect 3D compatible TV to an HDMI AV OUT terminal of this unit using a High Speed HDMI Cable gt 8 9 e Perform the necessary preparations for the TV e Play back following the instructions displayed on the screen e 3D Settings gt 25 28 BA Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue In the event that you experience dizziness nausea or other discomfort while viewing 3D images discontinue use and rest your eyes 3D video might not output the way it is set in HDMI Video Format or 24p Output 26 When playing back 3D photos from Photos screen select from the 3D list Still pictures in 2D are played back in 2D If 2D and 3D indications are not
19. 10 15 44 MAG 52 TOSHIBA 16 57 METZ 05 28 79 WHITE MITSUBISHI 05 19 20 47 WESTINGHOUSE 9 MIVAR 24 YAMAHA 18 41 E Display languages list Display Language Display Language Display Language ENG English JPN Japanese ARA Arabic FRA French CHI Chinese HIN Hindi DEU German KOR Korean PER Persian ITA Italian MAL Malay IND Indonesian ESP Spanish VIE Vietnamese MRI Maori NLD Dutch THA Thai BUL Bulgarian SVE Swedish POL Polish RUM Romanian NOR Norwegian CES Czech GRE Greek DAN Danish SLK Slovak TUR Turkish POR Portuguese HUN Hungarian Others RUS Russian FIN Finnish 3 8 VQT3V62 Specifications l File format Wave length 790 nm CDs 660 nm DVDs 405 nm BDs Laser power No hazardous radiation is emitted with the safety protection Power supply AC 220 to 240 V 50 Hz quick start standby mode Power consumption Approx 9 9 W Power consumption in Approx 0 1 W standby mode Power consumption in Approx 3 2 W Dimensions WxHxD Including the projecting parts 430 mmx 38 mmx 185 mm Mass Approx 1 5 kg Specifications are subject to change without notice Signal system PAL NTSC File format Extension Reference Operating temperature 5 C to 35 C i i range This unit supports ID3 MP3 MP3 mp3 tags but only titles artist Operating humidity 10 to 80 RH no 4
20. E ET INVISIBLE CLASSE 2 EN CAS D OUVERTURE NE PAS REGARDER DANS LE FAISCEAU FORSIGTIG SYNLIG OG USYNLIG LASERSTRALING KLASSE 2 NAR L GET ER BENT UNDGA AT SE LIGE IND STRALEN VARO AVATTAESSA OLET ALTTIINA LUOKAN 2 NAKYVAA JA NAKYMATONTA LASERSATEILYA ALA TUNOTA SATEESEEN CLASS 1 LASER PRODUCT VARNING KLASS 2 SYNLIG OCH OSYNLIG LASERSTRALNING NAR DENNA DEL AR PPNAD STIRRA EJ IN STRALEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG KLASSE 2 WENN ABDECKUNG GE FFNET NICHT IN DEN STRAHL BLICKEN RE FANAARRAA AA RRA ma G HER GENEIN ORAL VANNES Back of product e Eneoeeae ace VQL2P54 EU Pursuant to at the directive 2004 108 EC article 9 2 Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15 22525 Hamburg Germany Environment friendly printed on chlorine free bleached paper Panasonic Corporation En Web Site http ipanasonic net AMC AIAN UT AIA Panasonic Corporation 2012 VQT3V62 FO112STO
21. LAC MP3 and WAV on the USB device can be played back during the slideshow of Soundtrack JPEG on the USB device or the SD card e A music CD can also be played back during the slideshow of JPEG on the SD card Soundtrack Select the folder from which Folder the music files are played Random Background music is played in Soundtrack random order an Still pictures displayed as cannot be played back with this unit When both the music CD and the USB device with recorded music are inserted into this unit the music CD has priority to be played back as background music 1 8 VQT3V62 Enjoying Network Service You can access information services from the VIERA Connect Home screen via the Internet VIERA Connect provides a variety of selected Internet services such as the following e Online movie rental service Video communication service e Video browsing service Internet Images are for illustration purposes contents may change without notice Preparation e Network connection gt 10 e Network setting gt 11 To enjoy video communication ex Skype e Connect this unit with optional Communication Camera TY CC20W or TY CC10W Depending on your location this optional camera may not be available Please consult your local Panasonic dealer for advice BDT120 When this unit is connected by wireles
22. Panasonic Operating Instructions Blu ray Disc Player Model No DMP BDT220 DMP BDT120 Unless otherwise indicated illustrations in these operating instructions are of DMP BDT220 Thank you for purchasing this product For optimum performance and safety please read these instructions carefully Please keep this manual for future reference Region management information BD Video This unit can play BD Video discs supporting the region code B Example DVD Video This unit can play DVD Video discs supporting the region number 2 or ALL Example 2 oe Model number suffix EB denotes UK model EB VQT3V62 Safety precautions WARNING Unit To reduce the risk of fire electric shock or product damage e Do not expose this unit to rain moisture dripping or splashing e Do not place objects filled with liquids such as vases on this unit e Use only the recommended accessories Do not remove covers e Do not repair this unit by yourself Refer servicing to qualified service personnel Do not let metal objects fall inside this unit e Do not place heavy items on this unit AC mains lead To reduce the risk of fire electric shock or product damage e Ensure that the power supply voltage corresponds to the voltage printed on this unit Insert the mains plug fully into the socket outlet Do not pull bend or place heavy items on the
23. Playing back while using VIERA Link etc e g EN 508 A Press RETURN to hide the Control Panel E Top Menu Display Top Menu E Pop up Menu Display Pop up Menu E Menu Display Menu Personal Taste You can access settings to enjoy special features of this unit from this category Refer to Picture Settings and Sound Settings 25 for more details on each setting item Picture Settings E Picture Mode Select the picture quality mode during play e If you select User you can change settings in Picture Adjustment E Picture Adjustment 3 Specific picture quality settings can be performed e 3D NR Reduces the rough noise in the background to give a greater feeling of depth When 24p Output is set to On this function may not operate gt 26 Integrated NR Smoothes block noise and reduces the smudging that appears around contrasting sections of the picture 2 4 VQT3V62 E Chroma Process The high resolution processing of HDMI chroma signals produces a high resolution picture with rich picture quality E Detail Clarity 3 The picture is sharp and detailed E Super Resolution 3 Pictures of normal image quality are corrected to sharp and detailed images when output as 1080i 1080p from HDMI AV OUT E Progressive Select the method of conversion for progressive output to suit the type of material being played
24. The WLAN feature of this product shall exclusively be used inside buildings This product on purpose to connect to access point of 2 4 GHz WLAN AVCHD AVCHD 3D AVCHD Progressive and AVCHD 3D Progressive are trademarks of Panasonic Corporation and Sony Corporation Java is a registered trademark of Oracle and or its affiliates Java POWERED Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 226 616 6 487 535 7 392 195 7 272 567 7 333 929 7 212 872 amp other U S and worldwide patents issued amp pending DTS HD the Symbol amp DTS HD and the Symbol together are registered trademarks amp DTS HD Master Audio Essential is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved This item incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly are prohibited HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries This product is licensed under the AVC patent portfolio license and VC 1 patent portfolio license for the personal and non commercial use of a consumer to i
25. V62 Information for Users on Collection and Disposal of Old Equipment and used Batteries jai A These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC and 2006 66 EC By disposing of these products and batteries correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation For business users in the European Union If you wish to discard electrical and electronic equipment please contact your dealer or supplier for further information Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and ask for the correct metho
26. an redo these settings individually using Network Settings gt 29 Do not use this unit to connect to any wireless network for which you do not have usage rights During automatic searches in a wireless network environment wireless networks SSID for which you do not have usage rights may be displayed however using hese networks may be regarded as illegal access After performing network settings on this unit the settings encryption level etc of the wireless router might change When you have trouble getting online on your PC perform he network settings on your PC in accordance with the settings of the wireless router Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party or the leaking of data such as personal or secret information An SSID Service Set Dentification is a name used by wireless LAN to identify a particular network Transmission is possible if the SSID matches for both devices The wireless router compatible with Wi Fi Protected Setup may have the mark N 1 2 VQT3V62 Firmware updates Occasionally Panasonic may release updated firmware for this unit that may add or improve the way a feature operates These updates are available free of charge This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection When a new firmware ve
27. as 3D virtually gt 25 E Music CD Operation and sound quality of CDs that do not conform to CD DA specifications copy control CDs etc cannot be guaranteed 6 VQT3V62 E SD card miniSD Cards microSD Cards microSDHC Cards and microSDXC Cards can be used but must be used with an adaptor card These are usually supplied T with such cards or otherwise customer provided e To protect the card s contents move the record prevention tab on the SD card to LOCK e This unit is compatible with SD Memory Cards that meet SD Card Specifications FAT12 and FAT16 formats as well as SDHC Memory Cards in FAT32 format Does not support long file names and SDXC Memory Cards in exFAT e f the SD card is used with incompatible computers or devices recorded contents may be erased due to the card being formatted etc e Useable memory may be slightly less than the card capacity E USB device e This unit does not guarantee connection with all USB devices e This unit does not support USB device charging FAT12 FAT16 FAT32 and NTFS file systems are supported e This unit supports USB2 0 High Speed e This unit can support an HDD formatted to FAT32 and NTFS Some types of HDD may require the use of its external power supply unit E BD RE BD R Discs recorded in DR mode using Panasonic Blu ray Disc recorders may not play back the audio etc correctly an e t may not be possible to play the above me
28. ate compatibility information on your wireless router refer to http panasonic jp support global cs This site is in English only e The unit is not compatible with public wireless LAN services Hotspot etc provided in airports stations cafes etc e See page 40 for the precautions of wireless LAN connection LAN cable connection LAN Cable Broadband router etc ee ee 7 Internet 0 e Use category 5 or above straight LAN cables STP when connecting to peripheral devices Inserting any cable other than a LAN cable in the LAN terminal can damage the unit STEP 4 Connecting the AC mains lead a E ee mains AC mains lead supplied e This unit consumes a small amount of AC power 39 even when turned off In the interest of power conservation if you will not be using this unit for an extended period of time it can be disconnected 1 0 VQT3V62 STEP 5 Settings Easy Setting After connecting your new player for the first time and pressing a screen for the basic settings will appear Preparation Turn on the television and select the appropriate video input on the television 1 Press b Setup screen appears 2 Follow the on screen instructions and apply the settings mo e You can perform this setup anytime by selecting Easy Setting in the Setup menu gt 30 e If this unit is connected to a Panasonic TV VIERA supporting HDAVI Control 2 or lat
29. compatible equipment and select this unit s input channel on the connected TV so that the HDAVI Control function works properly Also when the connection or settings are changed repeat this procedure Automatic input switching Power on link When the following operations are performed the input channel of the television will be automatically switched and the screen of this unit will be displayed When the television is off the television will automatically turn on When play starts on the unit When an action that uses the display screen is performed e g HOME menu 2 2 VQT3V62 Power off link All connected equipment compatible with HDAVI Control including this unit automatically turns off when you switch the television off Playing music continuously even after turning off the television When the unit is connected to a Panasonic TV VIERA that supports HDAVI Control 2 or later and an amplifier receiver supports VIERA Link While playing music Press OPTION Select TV Power and press OK Easy control only with VIERA remote control Only when TV supports HDAVI Control 2 or later By using the TV remote control you can perform various playback operations and settings See the operating instructions of the TV for more details ae The buttons that you can use for this unit vary depending on the TV For details refer to the operating instructions of the TV T
30. d of disposal Note for the battery symbol bottom two symbol examples This symbol might be used in combination with a chemical symbol In this case it complies with the requirement set by the Directive for the chemical involved VQT3V62 43 Reference Sales and Support Information Customer Communications Centre e For customers within the UK 0844 844 3899 e For customers within Ireland 01 289 8333 e For further support on your product please visit our website www panasonic co uk Direct Sales at Panasonic UK Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre Monday Thursday 9 00 a m 5 30 p m Friday 9 30 a m 5 30 p m Excluding public holidays Or go on line through our Internet Accessory ordering application at www pas europe com e Most major credit and debit cards accepted e All enquiries transactions and distribution facilities are provided directly by Panasonic UK t couldn t be simpler e Also available through our Internet is direct shopping for a wide range of finished products Take a browse on our website for further details CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN Inside of prod uct DO NOT STARE INTO BEAM FDA 21CFRICLASS 1 1a CAUTION CLASS 2 VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO THE BEAM IEC60825 1 CLASS 2 ATTENTION RAYONNEMENT LASER VISIBL
31. dia in some cases due to the type of media the condition of the recording the recording method and how the files were created The producers of the disc can control how discs are played so you may not always be able to control play as described in these operating instructions Read the disc s instructions carefully Control reference guide E Dian 10 p ee TVN open ose l Ca wo R pLay 5 7 skip slow Skip he IIPAUSE gt gt i OANDOaASR 11 12 13 14 15 16 17 18 19 J 20 A 21 22 Turn the unit on and off TV operation buttons gt 13 You can operate the TV through the unit s remote control TV Turn the television on and off AV Switch the input select VOL Adjust the volume Select title numbers etc Enter numbers or characters Cancel Basic playback control buttons gt 16 Show status messages 17 Show Top menu 17 Show Option menu gt 23 Coloured buttons red green yellow blue Used for various purposes depending on the display Transmit the remote control signal Open or close the disc tray gt 14 Show NETFLIX screen gt 19 Start up a video communication gt 19 Set up 3D effects 4 25 Switch on off Secondary Video Picture in picture gt 23 Show the Home screen of the VIERA Connect gt 19 Select audio gt 16 Exit the menu screen Show Pop up me
32. e unit 2 Press OK or A V lt gt to select the item e f there are any other items repeat this step HOME TAJ eza Blu ray Disc Player Network S lft mE S Photos Setup Music Videos Po ME Rese Ast user Videos Photos Music Disc Play back the contents gt 16 SD Card e When multiple contents are recorded select the types USB of contents or the title Network Network Displays the Home screen of Service VIERA Connect gt 19 Home Network DLNA Client gt 20 Media Renderer gt 21 Setup Player Settings gt 26 SD Card Management gt 17 Wallpaper Changes the background of HOME menu To show the HOME menu Press HOME Bn Items to be displayed may vary with the media Multi User Mode Multi User Mode is a function that enables switching of multiple settings easily Up to 4 people can use the unit with their own settings The following settings can be personalized e The user icon The wallpaper of HOME menu The audio and picture settings gt 23 26 Smartphone used as a remote control can be registered with respect to each user e Multiple users cannot be Register Smartphone registered for one smartphone Blu ray Disc Player Network e E Register B sa 2nd user The user name and icon c
33. e unit 3 2 VQT3V62 General operation To return to the factory preset gt Select Yes in Default Settings in the Setup menu gt 31 To return all settings to the factory preset gt Reset the unit as follows While the unit is off press and hold OK the yellow button and the blue button on the remote control at the same time for more than 5 seconds 00 RET is displayed on the unit s display Repeatedly press P right on the remote control or I on the unit until 08 FIN is displayed on the unit s display Press and hold OK on the remote control or 4 OPEN CLOSE on the unit for at least 3 seconds This unit is turned off when the input for the TV is switched gt This is anormal phenomenon when using VIERA Link HDAVI Control 4 or later For details please read the operating instructions for the TV The remote control doesn t work properly gt Change the batteries in the remote control gt 4 gt The remote control and main unit are using different codes If SET Q is displayed on the unit s display when a button is pressed on the remote control change the code on the remote control gt 31 36 The TV tuner mode is not displayed when the TV is switched on gt This phenomenon may occur depending on the TV setting when Quick Start is set to On gt Depending on the TV this phenomenon may be prevent
34. ed by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting You have forgotten your ratings password You want to cancel the ratings level gt The ratings level returns to the factory preset While the unit is on press and hold OK the yellow button and the blue button on the remote control at the same time for more than 5 seconds 00 RET is displayed on the unit s display Repeatedly press P right on the remote control or 9 1 on the unit until 03 VL is displayed on the unit s display Press OK on the remote control or 4 OPEN CLOSE on the unit This unit does not recognize the USB connection correctly gt Disconnect and reconnect the USB cable If it still does not recognize the connection turn this unit off and on again USB devices may not be recognized by this unit when connected using the following a USB hub a USB extension cable other than the supplied with the Wireless LAN Adaptor DY WL5 optional If you connect USB HDD to this unit use the USB cable that is supplied with the HDD Picture The images from this unit do not appear on the television Picture is distorted gt An incorrect resolution is selected in HDMI Video Format Reset the setting as follows While the unit is on press and hold OK the yellow button and the blue button on the remote control
35. ed for Soundtrack Preference is not available subtitles of that language will automatically appear if available on that disc e Enter a code gt 38 when you select Other E Menu Preference Choose the language for the disc menus e Enter a code gt 38 when you select Other KKK Subtitle Text Select a suitable item according to the language used for DivX or MKV subtitles text e This item is displayed only after playing back a file E On Screen Language Choose the language for menus and on screen messages Network E Easy Network Setting gt 11 E Network Settings Perform network related settings individually Press OK to show the following settings gt LAN Connection Mode Select the LAN connection method BDT220 Select Wireless Master when you make a direct wireless connection between this unit and a Home Network device Internet connection is not available when this item is selected gt Wireless Settings This allows the wireless router and connection settings to be set Current connection settings and connection state can be checked Connection Setting The wireless router connection wizard will be displayed Double Speed Mode Setting 2 4GHz When a 2 4 GHz wireless format is used this sets the connection speed e f you connect using the Double Speed Mode 40MHz 2 channels use the same frequency band and there
36. encode video in compliance with the AVC Standard and VC 1 Standard AVC VC 1 Video and or ii decode AVC VC 1 Video that was encoded by a consumer engaged in a personal and non commercial activity and or was obtained from a video provider licensed to provide AVC VC 1 Video No license is granted or shall be implied for any other use Additional information may be obtained from MPEG LA LLC See http www mpegla com HDAVI Control is a trademark of Panasonic Corporation VIERA Connect is a trademark of Panasonic Corporation MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson SDXC Logo is a trademark of SD 3C LLC DVD Logo is a trademark of DVD Format Logo Licensing Corporation The Wi Fi CERTIFIED Logo is a certification mark of the Wi Fi Alliance The Wi Fi Protected Setup Mark is a mark of the Wi Fi Alliance AFD Wifi pRoTECTED CERTIFIED SETUR Wi Fi Wi Fi Protected Setup Wi Fi Direct WPA and WPA2 are marks or registered marks of the Wi Fi Alliance DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files
37. er via an HDMI cable then setting information on the TV such as On Screen Language is acquired by this unit Easy Network Setting After completing Easy Setting you can perform Easy Network Setting Select Wired or Wireless and press OK e g BDT220 Select a connection mode Current setting Wired Wired Wireless KE K X RETURN E Wired connection Follow the on screen instructions to apply your connection settings E Wireless connection Before beginning wireless connection setup e Obtain your network name SSID e If your wireless connection is encrypted please be sure that you know your encryption key BDT120 If Wireless LAN Adaptor is not connected is displayed check that the Wireless LAN Adaptor is fully inserted Alternatively disconnect and reconnect it If there is still no change in the display consult your dealer for advice Select Search for wireless network or WPS PUSH button and press OK then follow the on screen instructions and apply the settings Select a connection method to wireless access point Please refer to the operating instructions of your wireless access point about connection methods Search for wireless network WPS PUSH button of WPS PUSH button If your wireless router supports e g WPS PUSH button you can eas
38. fer from actual AC mains plug 1 Open the fuse cover with a screwdriver FigureA i Figure B 2 Replace the fuse and close or attach the fuse cover Fuse Figure A 5 ampere Fuse Figure B 5 ampere Table of contents Getting started Safety precautions 005 2 Caution for AC Mains Lead 3 AACCESSOMIGS a iaaiiai s nii nea eis 4 Unit and media care 0005 4 Playable media 002000000 5 Control reference guide 7 Connections and settings STEP 1 Connecting toaTV 8 STEP 2 Connecting to an amplifier receiver 9 STEP 3 Connecting to the network 10 STEP 4 Connecting the AC mains lead 10 STEP 5 Settings STEP 6 Reprogramming the remote control 13 Playback a u Rj Inserting or removing media 14 HOME menu 00000 eee eee 14 Multi User Mode 2 22000005 15 Playback i irae saasaa a N NEE 16 Enjoying Network Service 19 Home Network feature 20 VIERA Link HDAVI Control 22 Settings et Option menu 00000 eee eee 23 Setup mMenu 000 0c eee 26 Reference LL _ _ _ LL _ L_L_LL____________ Troubleshooting guide 32 Messages 0 00 e ee eee eee eae 36 Supplemental information 38 Specificati
39. g Dolby TrueHD E Digital Audio Output Press OK to show the following settings gt Dolby D Dolby D Dolby TrueHD gt DTS DTS HD gt MPEG Audio Select the audio signal to output e Select PCM when the connected equipment cannot decode the respective audio format This unit decodes the audio format and transmits to the connected equipment e Not making the proper settings may result in noise gt BD Video Secondary Audio Select whether or not to mix the primary and secondary audio including the button click sound If Off is selected the unit outputs the primary audio only gt HDMI Audio Output This setting selects whether or not to output audio from HDMI Select Off when the TV is connected to this unit via an HDMI terminal and this unit is also connected to other devices such as an amplifier receiver via an OPTICAL terminal E PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz for the PCM output from the DIGITAL AUDIO OUT e f On is selected the signals that are converted to 48 kHz are output e If Off is selected and the connected equipment does not support 96 kHz the sound will not be output normally e Signals are converted to 48 kHz despite the settings in the following cases when the signals have a sampling frequency of 192 kHz when the disc has copy protection when BD Video Secondary Audio
40. g the red button on the remote control BDT220 The connection method can be switched to Wi Fi Direct by pressing the green button on the remote control kh OD oa Select the equipment and press OK Select the item to play and press OK You may be able to use convenient functions depending on the content by pressing OPTION Control Panel gt 24 is displayed once the playback starts Press OK if the Control Panel is not displayed and press RETURN to hide the Control Panel To exit from Home Network Press EXIT HOME or TOP MENU Using the Digital Media Controller You can use the smartphone etc as the Digital Media Controller DMC to play back contents from DLNA server on the Renderer this unit Possible applications Li Renderer G p Controller Renderer DMC compatible software should be installed Preparation Perform steps and gt 20 Add the contents and folder to the libraries of the Windows Media Player or the smartphone etc e Playlist of Windows Media Player can play back only the contents that are stored in the libraries Perform the Remote Device Settings gt 29 e You can register up to 16 devices Press HOME Select Network Select Home Network Select Media Renderer ah wh Select Home Network or Wi Fi Direct BDT220 and pres
41. hange the code on the remote control Press and hold OK and the indicated number L button at the same time for more than 5 seconds U59 gt The unitis hot The unit switches to standby for safety reasons Wait for about 30 minutes until the message disappears Select a position with good ventilation when installing the unit I or F stands for a number There is something unusual Check the unit using the troubleshooting guide If the service number remains displayed do the following Disconnect the plug from the household mains socket wait a few seconds then reconnect it Press Q I to turn the unit on If the service number remains displayed despite doing the above request service from the dealer Inform the dealer of the service number when requesting service Vv START gt The system is being restarted during the firmware update Please do not turn off the unit UPDU O 1 stands for a number gt The firmware is being updated Please do not turn off the unit FINISH gt The firmware update is complete Restriction on use of unauthorized copied content This unit adopts the following technology for copyright protection Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially produced film and videos and their s
42. he operation of this unit may be interrupted when you press certain buttons on the TV remote control This unit supports HDAVI Control 5 function HDAVI Control 5 is the newest standard current as of November 2011 for Panasonic s HDAVI Control compatible equipment This standard is compatible with Panasonic s conventional HDAVI equipment VIERA Link HDAVI Control based on the control functions provided by HDMI which is an industry standard known as HDMI CEC Consumer Electronics Control is a unique function that we have developed and added As such its operation with other manufacturers equipment that supports HDMI CEC cannot be guaranteed Please refer to individual manuals for other manufacturers equipment supporting VIERA Link function Option menu A variety of playback operations and settings can be performed from this menu Available options differ depending on the playing contents and the condition of the unit About Multi User Mode Al Settings of the items with this indication are saved by the respective users registered in the HOME menu Please refer to page 15 for details about user registration and switching 1 Press OPTION e When playing music select Playback Settings and press OK e g BD Video Soundtrack Subtitle Angie ic Repeat Play Status Lenton Primary Video Secondary Video ta Control Panel Top Menu 1 ENG DTS HD MSTR Multi MPEG
43. he type of television connected When connected to a 4 3 aspect television and playing 16 9 ratio image The sides are cut off so the K picture fills 4 3 Pan amp Scan the screen When playing BD Video video is output as 4 3 Letterbox Black bands appear at the top and bottom of the picture 4 3 Letterbox When connected to a 16 9 widescreen television and playing 4 3 ratio image Video is displayed as a 4 3 16 9 ratio image in the centre of the screen Video is displayed as a horizontally stretched 16 9 image 16 9 full gt TV System Perform the setup so it matches the TV System of the connected TV e When NTSC contents are played they are outputted in the signal format specified in the NTSC Contents Output irrespective of the settings here gt 26 gt Screen Saver Function This is to prevent burn in on the screen When this is set to On If a list of playback content is displayed and there is no operation for 10 minutes or more the screen switches to HOME menu automatically e While playing and pausing etc this function is not available gt On Screen Messages Choose whether to show status messages automatically gt VIERA Link Set to use HDAVI Control function when connected via HDMI cable to a device that supports HDAVI Control e Select Off when you do not want to use
44. ifier receiver and TV using an optical digital cable OPTICAL DIGITAL AUDIO OUT Fy PCM BITSTREAM lt j OPTICAL Set HDMI Audio Output to Off 27 Set Digital Audio Output gt 27 Optical digital cable o p o OPTICAL IN Amplifier receiver VQT3V62 9 Connections and settings STEP 3 Connecting to the network The following services can be used when this unit is connected to broadband e Firmware can be updated gt 12 e You can enjoy BD Live gt 17 e You can enjoy VIERA Connect gt 19 e You can access other devices Home Network gt 20 BDT220 This unit supports Wi Fi Direct and can make a wireless connection to wireless devices without router You can use this function when enjoying Home Network feature etc Internet access is not available while connected via Wi Fi Direct 20 29 For details about connection method refer to the instructions supplied with the connected equipment Wireless LAN connection BDT220 Wireless LAN is built in There is no need to connect a Wireless LAN Adaptor BDT120 Connect the Wireless LAN Adaptor DY WL5 optional Only DY WL5 can be used Read the operating instructions for DY WL5 thoroughly when using it COMMUNICATION BDT120 CAMERA X lt Wireless router etc Internet e For up to d
45. ily perform the settings by pressing WPS button on it VQT3V62 1 1 Connections and settings WPS Wi Fi Protected Setup is a standard that facilitates settings relating to the connection and security of wireless LAN devices Press WPS button or corresponding button of the wireless router until the lamp starts flashing e For details refer to the operating instruction of the wireless router Press OK Search for wireless network e When you select Search for wireless network the available wireless networks will be displayed Select your network name and press OK If your network name is not displayed search again by pressing the red button on the remote control Stealth SSID will not be displayed when you select Search for wireless network Enter manually by using Manual setting Press HOME gt select Setup gt OK gt select Player Settings gt select Network gt OK gt select Network Settings gt OK gt select Wireless Settings gt OK gt select Connection Setting gt OK gt select Manual setting gt OK e f your wireless network is encrypted Encryption Key input screen will be displayed Input the encryption key of your network ae Refer to the operating instructions of the hub or router You can perform this setup anytime by selecting Easy Network Setting in the Setup menu gt 29 You c
46. ing the disc from this unit select Set before play in the Setup menu and select 2D Playback in the setup screen displayed when playing 3D discs gt 28 VQT3V62 3 3 Reference Video is not output in high definition gt Confirm that HDMI Video Format in the Setup menu is set properly gt 26 3D video is not output gt Change the settings as required by the connected TV format gt 28 3D Type gt Is there a non 3D compatible amplifier receiver connected between this unit and a TV gt 9 gt Are the settings on this unit and the TV correct gt 17 gt Is the amplifier receiver that is connected between this unit and TV on gt Depending on the connected TV the video being played back might switch to 2D video due to changes in resolution etc Check the 3D setting on the TV 3D video is not output correctly as 2D gt Select Set before play in the Setup menu and select 2D Playback in the setup screen displayed when playing 3D discs gt 28 3D BD Video Playback gt Discs that have recorded titles with Side by side 2 screen structure and that can be enjoyed in 3D are played back in accordance with the settings of the TV A black band is displayed around the edge of the screen The aspect ratio of the screen is abnormal gt Confirm the TV Aspect is set properly gt 30 gt Adjust the aspect setting on the televisi
47. into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration VQT3V62 41 Reference DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries Skype associated trade marks and logos and the 8 logo are trade marks of Skype Limited This product incorporates the following software 1 the software developed independently by or for Panasonic Corporation 2 the software owned by third party and licensed to Panasonic Corporation 3 the software licensed under the GNU General Public License Version 2 GPL v2 4 the software licensed under the GNU LESSER General Public License Version 2 1 LGPL v2 1 and or 5 open sourced software other than the software licensed under the GPL v2 and or LGPL v2 1 For the software categorized as 3 and 4 please refer to the terms and conditions of GPL v2 and LGPL v2 1 as the case may be at http www gnu org licenses old licenses gpl 2 0 html and http www gnu org licenses old licenses Igpl 2 1 html In addition
48. is consequently a greater risk of reception interference This can cause the connection speed to drop or become unstable gt IP Address DNS Settings This is for checking the state of the network connection and setting the IP address and DNS related Press OK to show the respective setting gt Proxy Server Settings This is for checking the state of connection with the Proxy server and performing settings Press OK to show the respective setting gt Network Service Settings gt 19 VIERA Connect Press OK to show the following settings Audio Auto Gain Control Volume that is different depending on the contents is adjusted automatically to the standard volume while using the VIERA Connect e Depending on contents this function effect will not work e Select Off when the audio is warped Time Zone By selecting the time zone it is possible to set the unit s time to match your location e Some VIERA Connect contents require the time zone to be set Set the time zone if necessary Summer Time Select On when using Daylight Saving time gt Network Drive Connection It is possible to access the shared folder of equipment not compatible with DLNA such as the Windows XP operating system and play back video still pictures and music on this unit For the setting and operation method of connected equipment refer to the following Website http panasonic jp suppo
49. movie contents are recorded in 24 frames second in accordance with the film materials gt HDMI Colour Mode This setting is for selecting colour space conversion of the image signal when the unit is connected using an HDMI cable gt Deep Colour Output This setting is for selecting whether to use Deep Colour output when a television that supports Deep Colour is connected gt Contents Type Flag Depending on the playback content the TV will output adjusting to the optimal method when a TV that supports this function is connected E NTSC Contents Output Select PAL60 or NTSC output when playing NTSC discs 2 6 VQT3V62 E Still Mode Select the type of picture shown when you pause playback Automatically selects the type Automatic of picture shown Select if jittering occurs when Field Automatic is selected Select if small text or fine patterns cannot be seen clearly when Automatic is selected Frame E Seamless Play The chapter segments in playlists are played seamlessly e Select On when the picture freezes for a moment at the chapters segment in playlists Sound E Sound Effects 3 gt 25 E Dialogue Enhancer 3 25 E Dynamic Range Compression You can listen at low volumes but still hear dialog clearly Dolby Digital Dolby Digital Plus and Dolby TrueHD only e Automatic is effective only when playin
50. need to change the remote control code to prevent this occurrence gt 31 Remote Control For TV You can operate the TV using the unit s remote control 1 Input the 2 digit code gt 38 while pressing TV e g 01 0 gt 1 2 Test by turning on the television ae e f your television brand has more than one code listed select the one that allows correct operation VQT3V62 13 Connections and settings Inserting or removing media Notes facing the right way up e When removing the SD card press the centre of the card and pull it straight out e If you connect a Panasonic product with a USB connection cable the setup screen may be displayed on the connected equipment For details refer to the instructions for the connected equipment e Use the front USB port when you connect a USB memory or a USB HDD The USB port on the rear panel is only for the following devices BDT120 Wireless LAN Adaptor Communication Camera CAUTION Do not place objects in front of the unit The disc tray may collide with objects when it is opened and this may cause malfunction 1 4 VQT3V62 T ea e When inserting a media item ensure that it is HOME menu Major functions of this unit can be operated from the HOME menu Preparation Turn on the television and select the appropriate video input on the television 1 Press b to turn on th
51. nt E Default Settings This returns all values in the Setup menu and the Option menu to the default settings except for some settings of network ratings remote control code language etc VQT3V62 3 1 Settings Troubleshooting guide Before requesting service please perform the following checks If the problem remains unresolved consult your dealer for instructions Do you have the latest firmware installed Firmware updates may be released to correct operating irregularities that are discovered with certain movies gt 12 The following do not indicate a problem with this unit Regular disc rotating sounds Image disturbance during search Image disturbance when replacing 3D discs E Unit doesn t respond to remote control or front panel buttons Press and hold 5 I on the main unit for 3 seconds If still unable to turn the unit off disconnect the AC mains lead wait 1 minute then reconnect the AC mains lead E Cannot eject disc The unit may have a problem While the unit is off press and hold OK the yellow button and the blue button on the remote control at the same time for more than 5 seconds 00 RET is displayed on the unit s display Repeatedly press P right on the remote control or 5 I on the unit until O6 FTO is displayed on the unit s display Press OK on the remote control or 4 OPEN CLOSE on th
52. nu gt 17 Show HOME menu gt 14 A V lt gt Move the highlight for selection OK Confirm the selection lt I gt Frame by frame gt 16 Return to previous screen Getting started 10 5 4 L_I T Pull to flip down the i H 2 3 6 s 1 Standby on switch l gt 11 6 Press to switch the unit from on to standby mode or vice versa In standby mode the unit is still consuming a small amount of power Disc tray gt 14 SD card slot gt 14 USB port gt 14 CALL LED The LED will light up when this unit receives incoming call etc of the video communication gt 19 A AUN 00N 0 7 89 front panel Remote control signal sensor Distance Within approx 7 m Angle Approx 20 up and down 30 left and right Display Stop gt 16 Start play gt 16 Open or close the disc tray gt 14 Rear panel terminals 8 10 VQT3V62 STEP 1 Connecting to a TV Perform either one of the following connections in accordance with your TV input terminal e Before making any connections we recommend that you temporarily disconnect all the units from AC power e Do not connect video signals through a video recorder Due to copy guard protection the picture may not be displayed properly e Use the High Speed HDMI cables Non HDMI compliant cables cannot be utilized It is recommended that y
53. on 3 4 VQT3V62 Audio Cannot switch audio gt When connecting an amplifier receiver using an OPTICAL terminal or an HDMI terminal you cannot switch the audio if Digital Audio Output is set to Bitstream Set Digital Audio Output to PCM amp 27 Cannot hear the desired audio type gt gt Check the connections and the Digital Audio Output settings gt 9 27 To output audio from a device connected with an HDMI cable set HDMI Audio Output to On in the Setup menu gt 27 Playback Disc cannot be played gt The disc is dirty gt 4 Still pictures JPEG do not play back normally gt The images that were edited on the PC such as Progressive JPEG etc may not be played back can t play back BD Live gt The SD card is write protected gt 6 gt Confirm that this unit is connected to the broadband Internet gt 10 gt Confirm the BD Live Internet Access settings gt 30 gt Confirm an SD card is inserted into the SD card slot gt 14 Network can t connect to the network gt Confirm the network connection and settings gt 10 11 29 gt Check the operating instructions for each device and connect accordingly When using wireless LAN connection video from the DLNA Certified media server is not played back or video frames are dropped during playback gt Higher transfe
54. ons 000000 eae 39 Precautions of wireless LAN connection 40 e Restriction on use of unauthorized copied content gt 37 e Firmware updates gt 12 VQT3V62 3 Getting started Connections and settings Playback Settings Reference Accessories Check the supplied accessories before using this unit 1 Remote control N2QAYB000723 Batteries for remote control 1 AC mains lead K2CT2YY00003 an Product numbers provided in these operating instructions correct as of December 2011 These may be subject to change Do not use AC mains lead with other equipment E Using the remote control Insert so the poles and match those in the remote control R6 LR6 AA Alkaline or manganese batteries Point it at the remote control signal sensor on this unit gt 7 4 VQT3V62 Unit and media care E Clean this unit with a soft dry cloth e Never use alcohol paint thinner or benzine to clean this unit e Before using chemically treated cloth carefully read the instructions that came with the cloth E This unit s lens Lens cleaner RP CL720AE e This lens cleaner may not be available for sale in all countries e g not available in Germany please consult your Panasonic dealer for advice e This lens cleaner is sold as specific for DIGA but can be used on this unit as well E Clean discs DO DO NOT Wipe with a damp cloth and then wipe dry
55. ou use Panasonic s HDMI cable When outputting 1080p signal please use HDMI cables 5 0 meters or less Recommended part number High Speed HDMI Cable RP CDHS15 1 5 m RP CDHS30 3 0 m RP CDHS50 5 0 m etc BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION HDMI AV OUT High quality HDMI IN e Hom AV OUT HDMI cable J ViDEO ouT Standard quality Coon VIDEO IN cal li AUDIO IN Audio Video cable e Connect terminals of the same colour 8 VQT3V62 STEP 2 Connecting to an amplifier receiver Perform either one of the following connections in accordance with your amplifier receiver input terminal HDMI AV OUT y eu HDMI cable HDMI IN wR qo mh HDMI cable HDMI IN ARC i aae J Set Digital Audio Output 27 E Amplifier receiver e When connecting to a non 3D compatible amplifier receiver connect this unit to a TV via HDMI AV OUT then connect the TV and the amplifier receiver Please note however that the audio can only be up to 5 1ch When using the TV or amplifier receiver that does not have the indication of ARC non ARC compatible on the HDMI terminal in order to enjoy TV s sound by amplifier receiver it is also required to connect the ampl
56. oundtracks When a prohibited use of an unauthorized copy is detected a message will be displayed and playback or copying will be interrupted More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http www cinavia com To request additional information about Cinavia by mail send a postcard with your mailing address to Cinavia Consumer Information Center P O Box 86851 San Diego CA 92138 USA VQT3V62 3 7 Reference Supplemental information E TV code list E Language code list Brand TV Code Brand TV Code Language Code Language Code Language Code Panasonic 01 02 03 04 NEC 36 REREAD oan Enara Kes ASS ie Sis AIWA 35 NOBLEX 33 Afrikaans 6570 Hebrew 7387 Romanian 8279 AKAI 27 30 NOKIA 25 26 27 60 61 Albanian 8381 Hindi 7273 Russian 8285 Amharic 6577 H ian 7285 S 3 8377 BEKO 0574 7273174 NORDMENDE 10 Arabic 6882 Icelandic 7383 Sanskrit 8365 BENQ 58 59 OLEVIA 45 Armenian 7289 Indonesian 7378 Scots Gaelic 7168 i Serbian BRANDT 1015 ONWA 30 3970 Aymara 6589 Irish 7168 Serbo Croatian 8372 BUSH 05 ORION 05 Azerbaijani 6590 Italian 7384 Shona 8378 Bashkir 6665 J g 7465 Sindhi 8368 CENTREX 66 PEONY 49 69 Beene 6988 Javanese 7487 SENE 8373 CURTIS 05 PHILCO 41 48 64 Bengali Bangla Kannada 7578 Slovak 8375 DAEWOO 6465 PHILIPS 0610646 Bhutani 6800 Kazakh 7878 Soma 8379 DESMET 05 PHONOLA 05 Bihari 6672 Kirghiz 7589 Spanish 6983 Breton
57. r rate router such as 802 11n 2 4 GHz wireless router may solve the problem If you use 802 11n 2 4 GHz wireless router it is necessary to set the encryption type to AES Simultaneous use with a microwave cordless telephone etc at 2 4 GHz may result in connection interruptions or other problems gt On the Wireless Settings screen 29 the continuous lighting of at least 4 Reception indicators is the target for a stable connection If 3 or fewer indicators are lit or the connection is being interrupted change the position or angle of your wireless router and see if the connection state improves If there is no improvement connect to a wired network and perform the Easy Network Setting 9 11 again Reference VQT3V62 3 5 Messages The following messages or service numbers may appear on the TV or unit s display On the television Cannot play gt You inserted an incompatible disc Cannot play on this unit gt You tried to play a non compatible image gt Confirm SD on the unit s display is not displayed and re insert the card No disc inserted gt The disc may be upside down This operation is not available gt Some operations are unsupported by the unit For example BD Video During playback reverse slow motion or reverse frame by frame is not possible IP address is not set gt The IP Address in IP Address DNS Se
58. r to any condition of use or disuse of these devices e Data transmitted and received over radio waves may be intercepted and monitored e This unit or Wireless LAN adaptor contains delicate electronic components Please use these devices in the manner in which they were intended and follow the following points Do not expose these devices to high temperatures or direct sunlight Do not bend or subject these devices to strong impacts Keep these devices away from moisture Do not disassemble or alter these devices in any way cE 17310 Declaration of Conformity DoC Hereby Panasonic Corporation declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Customers can download a copy of the original DoC to our R amp TTE products from our DoC server http Awww doc panasonic de Contact in the EU Panasonic Services Europe a Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15 22525 Hamburg Germany This product is intended to be used in the following countries Austria Belgium Bulgaria Cyprus Czech Republic Denmark Finland France Germany Greece Hungary Ireland Italy Iceland Liechtenstein Luxembourg Malta Netherlands Norway Poland Portugal Romania Slovakia Slovenia Spain Sweden United Kingdom Switzerland This product is intended for general consumer Category 3
59. roduct is prohibited without a license from Microsoft or an authorized Microsoft subsidiary 2 MS PlayReady Final Product Labeling This product contains technology subject to certain intellectual property rights of Microsoft Use or distribution of this technology outside of this product is prohibited without the appropriate license s from Microsoft 3 MS PlayReady End User Notices Content owners use Microsoft PlayReady content access technology to protect their intellectual property including copyrighted content This device uses PlayReady technology to access PlayReady protected content and or WMDRM protected content If the device fails to properly enforce restrictions on content usage content owners may require Microsoft to revoke the device s ability to consume PlayReady protected content Revocation should not affect unprotected content or content protected by other content access technologies Content owners may require you to upgrade PlayReady to access their content If you decline an upgrade you will not be able to access content that requires the upgrade 4 Vorbis FLAC WPA Supplicant The software licenses are displayed when Software Licence in the Setup menu is selected gt 31 Copyright 2004 2010 Verance Corporation Cinavia is a Verance Corporation trademark Protected by U S Patent 7 369 677 and worldwide patents issued and pending under license from Verance Corporation All rights reserved 4 2 VQT3
60. rsion is available the following message is displayed New firmware is available Please update firmware in Setup To update the firmware Press HOME gt select Setup gt OK gt select Player Settings gt select System 9 OK gt select Firmware Update gt OK gt select Update Now gt OK DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place After the firmware is installed FINISH will be displayed on the unit s display Unit will restart and the following screen will be displayed The firmware has been updated Current Version x xx OK If downloading on this unit fails or this unit is not connected to the Internet then you can download the latest firmware from the following website and burn it to a CD R to update the firmware http panasonic jp support global cs This site is in English only To show the firmware version on this unit gt 31 Firmware Version Information Downloading will require several minutes It may take longer or may not work properly depending on the connection environment If you do not want to check for the latest firmware version set Automatic Update Check to Off 31 STEP 6 Reprogramming the remote control For other Panasonic products If you have more than one Panasonic player recorder and the remote control operates both products at once you will
61. rt global cs This site is in English only gt Remote Device Settings gt 21 Press OK to show the following settings Remote Device Operation Enable to operate by DMC e If On is selected Quick Start is fixed to On Device Name Entry Set the name of this unit to be displayed on the connected equipment VQT3V62 29 Settings Registration Type Allow connection to all the Automatic equipment that is accessing this unit Set the permission of the connection individually for Manual the equipment that is accessing this unit Remote Device List Registering deregistering of the displayed equipment can be performed when Manual in Registration Type is selected gt BD Live Internet Access gt 17 You can restrict Internet access when BD Live functions are used e f Limit is selected Internet access is permitted only for BD Live contents which have content owner certificates Ratings The following items use the same password Don t forget your password E DVD Video Ratings Set a ratings level to limit DVD Video play E BD Video Ratings Set an age limit of BD Video play E Network Service Lock You can restrict the usage of VIERA Connect System E Easy Setting You can execute basic settings 3 0 VQT3V62 E TV Settings Press OK to show the following settings gt TV Aspect Set to match t
62. s You can enjoy 3D pictures with Soft a feeling of broadness holding back the depth perception Manual Play back 3D pictures with settings of Manual Settings 1 Not every function can be set individually 2 This function is effective for audio from the HDMI terminal or the OPTICAL terminal only when Digital Audio Output is set to PCM 27 However in this case audio is output as 2ch from the OPTICAL terminal E Manual Settings 3 Set the amount of depth Distance perception Selects how the screen appears during 3D playback flat or round Screen Type Set the amount of feathering at Frame Width the edge of screen Set the colour of feathering at Framer clown the edge of screen E Graphic Display Level 3 Only when Full HD is selected in 3D Type gt 28 3D position for the Option menu or message screen etc can be adjusted during 3D playback VQT3V62 2 5 Settings Setup menu Change the unit s settings if necessary The settings remain intact even if you switch the unit to standby Some items in the Setup menu are common to the Option menu You can get the same effect with both menus About Multi User Mode A Settings of the items with this indication are saved by the respective users registered in the HOME menu Please refer to page 15 for details about user registration and switching 1 Press HOME 2
63. s OK then follow the indications on the screen 6 Operate the DMC compatible devices To exit from Media Renderer screen Press HOME qo For more details refer to the following website and the operating instructions for each of the equipment http panasonic jp support global cs This site is in English only BDT220 Wi Fi Direct connection while using Home Network feature is only temporary and the network connection method returns to the original setting when exiting playback may not be possible Items displayed in grey on the display cannot be played back by this unit when controlled using DMC VQT3V62 2 1 Depending on the contents and the connected equipment This unit can be played back via connected equipment only Playback VIERA Link HDAVI Control What is VIERA Link HDAVI Control VIERA Link HDAVI Control is a convenient function which will link the operations of this unit and a Panasonic TV VIERA or other device under HDAVI Control You can use this function by connecting the equipment with an HDMI cable See the operating instructions for connected equipment for operational details Preparation Set VIERA Link to On gt 31 The default setting is On Set the HDAVI Control operations on the connected equipment e g TV Turn on all HDAVI Control
64. s LAN connection connect the Communication Camera via the USB port on the front of this unit e For operating method refer to the following website http panasonic jp support global cs This site is in English only 1 Press INTERNET e The video communication service can be accessed directly by pressing aS button and NETFLIX can be accessed directly by pressing NETFLIX button 2 Select the item and press OK To exit from VIERA Connect Press EXIT HOME or TOP MENU aa When playing content in the media VIERA Connect cannot be accessed by pressing INTERNET In the following cases settings are possible using the Setup menu items When restricting the use of VIERA Connect 30 Network Service Lock When the audio is distorted 29 Audio Auto Gain Control When wrong time is displayed gt 29 Time Zone Summer Time If using slow Internet connection the video may not be displayed correctly A high speed Internet service with a speed of at least 6 Mbps is recommended e Be sure to update the firmware when a firmware update notice is displayed on the screen If the firmware is not updated you will not be able to use the VIERA Connect function gt 12 e VIERA Connect Home screen is subject to change without notice The services through VIERA Connect are operated by their respective service providers and service may be discontinued either
65. s when paused displaying the menu displaying still pictures etc Operations during playback Following functions may not work depending on the media and contents Stop Press ESTOP The stopped position is memorized Resume play function Press gt PLAY to restart from this position e The position is cleared if the tray is opened or you press IISTOP several times to display STOP on the unit s display e On BD Video discs including BD J the resume play function does not work 1 6 VQT3V62 Pause Press I IPAUSE e Press I IPAUSE again or gt PLAY to restart play Search Slow motion Search While playing press SEARCH 4 or SEARCH gt e Music and MP3 The speed is fixed to a single step Slow motion While paused press SEARCH lt 4 or SEARCH e BD Video and AVCHD SEARCHPP only The speed increases up to 5 steps e Press gt PLAY to revert to normal playback speed Skip While playing or paused press Miq or gt gt Skip to the title chapter or track Frame by frame While paused press lt 4 lt 1 or gt H gt e Press and hold to change in succession forward or backward e Press gt PLAY to revert to normal playback speed BD Video and AVCHD IEE only Changing audio Press AUDIO You can change the audio channel number or soundtrack language etc Displaying menus and playback information Show top menu pop
66. sump names and album names range condensation can be displayed Video output Output level 1 0 Vp p 75 Q e MOTION JPEG and Output connector Pin jack Progressive JPEG is 1 system not supported z g You may not be able to Audio output Output level 2 Vrms 1 kHz JPEG JPG jpg play back the file if you 0 dB TON have edited the folder Output connector Pin jack structure or the file Number of connectors name on a PC or other 2 channel device 1 system DIVX divx The video file and Digital audio output Optical digital output Optical AVI avi Ee text me are terminal DivX Subtitles text file rd k Ai Samel Cer SRT srt and the file names are HDMI AV output Output connector Type A a SUB p the same except for 19 pin 1 system TXT DF the file extensions SD card slot 1 system Some Divx and MKV MKV mkv file may not play back USB slot USB2 0 Subtitles text file depending on the 2 system MKV SRT srt video resolution and Ethernet 10BASE 1 100BASE TX SSA ssa frameirete condition 1 system ASS ass Wireless LAN Standard Compliance FLAC flac Maximum sampling rate BDT220 IEEE802 11 b g n 192 kHz 24 bit Frequency range 2 4 GHz aa Maximum sampling rate ae S CA aN 48 kHz 16 bit Security WPA WPA2 MPO __ mpo 3D still picture Encryption Type TKI P AES e With certain recording states and folder structures
67. ttings is Set the IP Address Subnet Mask and Gateway Address Select the automatic address acquisition if necessary The wireless access point currently has a low network security setting It is recommended to change to a higher setting gt Authentication type for the wireless LAN is set to Open system or the encryption type is set to No encryption It is recommended to encrypt for safety reasons For details refer to the instructions of the wireless router being used Encryption is required when playing back video etc from DLNA compatible devices 3 6 VQT3V62 On the unit s display F99 gt The unit fails to operate properly Press I on the main unit for 3 seconds to switch the unit to standby then switch back on HDMI ONLY gt Some BD Video discs can only be output with HDMI NET gt While connecting to a network No PLAY gt There is a viewing restriction on a BD Video or DVD Video gt 30 No READ gt The media is dirty or badly scratched The unit cannot play PLEASE WAIT gt The unit is carrying out internal process This is not a malfunction You cannot operate the unit while PLEASE WAIT is displayed REMOVE gt The USB device is drawing too much power Remove the USB device SET O stands for a number gt The remote control and main unit are using different codes C
68. urrently selected Personalize a new user and switch the users with coloured buttons Personalizing a new user 1 Press HOME 2 Press a coloured button that indicates new user personalization 3 Select an item and change the settings according to the indications The following items can be set Input Personalize a user name Nickname Personalize a user icon Select from Illustrations The image can be selected from prepared illustrations Create from Photos If the Communication Camera is connected you can shoot and personalize your photo Select Icon e You can also select a photo in recording media as an icon gt 23 Icon Registration Personalize a background of the HOME menu e Other than prepared wallpapers you can also select a photo in recording media as a wallpaper gt 23 Wallpaper Select Wallpaper 4 Select Confirm and press OK To change the personalized user information Select Edit User Information from Setup menu gt 31 Switching the user E Using coloured buttons Press the coloured buttons in the HOME menu to switch to the user corresponding to the button E Using facial recognition Only when connected to Communication Camera gt 19 Press OPTION in the HOME menu 2 Select Facial Recognition and press OK 3 Turn the face to Communication Camera The camera determines the closest face from

Panasonic DMP-BDT220

Contents

Download Pdf Manuals

Related Search

Related Contents