Home

Brickcom CB-102AP surveillance camera

image

Contents

1. 03 PZ 040D 3cd9 PZ 040D 3c gt 04 FB 300Ap 447a EN FB 300Ap 447 lt 05 GMD 100Ap 3933 EN GMD 100Ap 3933 gt 06 WFB 300Ap 435f EN WFB 300Ap 435f lt 07 MD 500Ap 360 0230 EN MD 500Ap 360 0230 Q Motion Detection Camera Info On the BRC64 PC NVR you can use the mouse or the software control panel to perform the PTZ pan tilt zoom operations For the mouse based PTZ control the drag operation of the mouse changes the viewing direction and the mouse wheel does the zoom in and zoom out of the image The result of the PTZ operation depends on where the camera is installed on the ceiling on the ground or on the wall For the BRC64 PC NVR to know the actual position of the camera please right click on the FishEye Immervision AO V Immervision A8TRT camera image for the menu to pop up Then select Image Effect gt Panorama gt Camera Position Under Camera Position 3 options are available Ceiling Ground Wall Ceiling Select this option if the camera is installed on the ceiling facing the ground Ground Select this option if the camera is installed on the ground facing the ceiling Wall Select this option if the camera is installed on the wall facing forward 47 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom COM PC NVR Current Position Description Disconnect The BRC64 PC NVR offers a few display modes for the FishEye Immervision AO V Immervision A8T
2. Profile Day IOC Lay d A A i i Brightness w Contrast Sharpness Saturation Flicker Free Exposure Control Metering Option De Noise eyel Auto Menti CT Mirror AUS Flip wea Color SS Black amp White Test in Full Screen Profile Up to five profiles can be created for different lighting environments Day and night are default profiles and users can create up to three additional profiles Select a profile from the drop down menu or select different icons to change profile settings Name Profile Name Brightness Drag the bar to adjust the image brightness level from 5 to 5 Contrast Drag the bar to adjust the image contrast level from 5 to 5 Sharpness Drag the bar to adjust the image sharpness level from 5 to 5 Saturation Drag the bar to adjust the image saturation level from 5 to 5 Flicker Free Eliminates the problem of flicker 33 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Exposure Control Auto The camera will automatically control exposure Manual Select this option to define the exposure manually Mirror and Flip Mirror Enable to horizontally reflect the display of the live video Flip Enable to vertically reflect the display of the live video De Noise Auto The camera will automatically filter the frame to frame defects to reduce the visual impact of blur The De noise can be set between 1 to 3 with 3 givi
3. Brickcom 4 Select either Complete setup or Custom setup to install the system a If COMPLETE SETUP is selected i All program features will be installed into the default directory Check the option Complete and then click lt Next gt Brickcom Software Kit InstallShield Wizard x Setup Type Select the setup type to install Please select a setup type All program features will be installed Requires the most disk space E Custom PLH Select which program features you want installed Recommended for advanced cf Kal LISTE Cancel il Select to create shortcuts Click lt Next gt to continue Brickcom Software Kit InstallShield Wizard x S CS as S Ee Setup Type Select the setup type that best suits your needs The InstallShield Wizard has successfully installed Brickcom Software Kit Click Next to continue M Create Desktop Shortcut F2 Create Quick Launch Shortcut M Create StartMenu Shortcut 14 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom il The installation information will be displayed Click lt Next gt to continue Brickcom Software Kit InstallShield Wizard x Please read the following text Current Settings Setup Type Complete Select Features EasyConfig PC NYR Standard Choose Destination Location EasyConfig C Program FilesiBrickcomEasyConfig PC NYR Standard C Program Fil
4. Password Enter the password of the Samba server Work Group Enter the workgroup of the Samba server Shared Folder Enter the share folder of the Samba server Samba Settings Ce Click Apply to apply settings or Cancel to cancel changes 74 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom HTTP Settings Select this option to send the media files via an HTTP notification when an event is triggered HTTP Settings Ce SC URL Specify the URL to send HTTP requests The URL is normally written as http ip_address notification cgi parameter Ip address type the IP address or host name of the HTTP host Parameter type the notification parameter if necessary Example URL http 192 168 1 1 xxxx cgi Message name1 value1 amp name2 vlaue2 Result http 192 168 1 1 xxxx cgi name1 value1 amp name2 vlaue2 Ex https 192 168 1 1 notification cgi event MD amp camera FB 100A Message Enter the message notification that will be sent when an event is triggered Enter the user name and password if necessary Click Apply to apply settings or Cancel to cancel changes 75 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Video Clip Video Clip Pre Alarm Buffer E Seconds 0 10 Post Alarm Buffer E Seconds 0 30 d I Maximum Buffer Size Kbytes 1248 1500 This function is used to determine when video clips will be recorded and stored a
5. AdO ele COTE E EEE 12 PMO FTI ONS erenn tasers nE E E EE em E E 13 RS OS a E E een 13 Sun UE ue Sree eens NE Re 74 SO SO OS ee ee ee eee 74 ATIP SEUNS EE 15 AO OP eh ee he en ee a eee 76 PICO CE E EE 7 LED GON eea ne ee ee eee 18 SO ee 19 Oy SI LO ee E 19 DAS ite LR erste on cease E EA E EA EA 80 DEVICE MONNA ON E 81 Storage Management 83 D VI ALOU aa E T EE E piatneaiipsanineereasweanecan 84 WVU CTV ANC Cs ee at ete 86 ISGP Man AGS ING IN eege 86 AA E R 87 ne 87 NAS COS EEE E E ENAS 88 CONDO ION 88 Reset to Default ee ee 89 REDOO ET 89 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Before You Use This Product In many countries there are laws prohibiting or restricting the use of surveillance devices This Network Camera is a high performance web ready camera which can be part of a flexible surveillance system It is the user s responsibility to ensure that the operation of this camera is legal before installing this unit for its intended use Upon opening the product s package verify that all the accessories listed on the Package Contents are included Before installing the Network Camera read the warnings in the Quick Installation Guide to avoid misuse When installing the Network Camera carefully read and follow the instructions in the Installation chapters to avoid damages due to faulty assembly or installation FCC Warning This device c
6. Send to Email E LED Light El Send UDP Notification to IP address Port Send Multicast Notification to IP address Part A Scheduled Event can be programmed for certain times and day Click individual boxes to schedule specific times for the camera to detect events b If Recurrence Pattern is selected the following page will be displayed 68 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Event List RH CC leases P A EDI ht Add Even Enabled Always Schedule Event Schedule Recurrence Pattern Sun M Mon O Tue M Wed M Thu O Fri O sat OO V Start UU v 07 v Duration 10 Minutes Event Audio Detection v C Save Stream to SD card Cl Send Snapshotto FTP ME IT Play Audio Clip There is no available audio clip Configure one here C Send HTTP Notification Cl Send to Email LED Light C Send UDP Notification to IP address C H H ee C Send Multicast Notification to IF address CIE IL DL ed i An event schedule can be programmed to recur at different times according to the user s needs Select the days for the event schedule to occur Selecta start time and specify the duration 3 Define what will trigger an event to occur by selecting an option from the Event drop down list 4 Select the Actions that will occur when the event is triggered 69 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom a When lt Send to Ema
7. This End User License Agreement the Agreement is a legal agreement between you either an individual of an entity and BRICKCOM CORPORATION BRICKCOM regarding the use of the BRICKCOM s software entitled Brickcom Software Kit version 1 4 9 which may include user documentation provided in online or electronic form the Software By clicking the button marked ACCEPT or YES below you agree to be bound by the terms of this Agreement If you do not agree to the terms of this Agreement please do not install or use the Software 1 Grand of License This Agreement permits you to use one copy of the specified version of the Software for internal purpose only on only one computer and only by one user at atime If you have purchased multiple licenses for the Software then at any time you may have as many copies of the Software in use as you have licenses If you obtain the Software together with a hardware product you are allowed to use the Software as a part of the hardware according to this Agreement The Software is in use on a computer when it is loaded into the temporary memory i e RAM or installed into the permanent memory e g hard disk CD ROM or other storage device of that computer In the event BRICKCOM provides you the upgrade for the Software you may use the resulting upgraded Software only in accordance with the terms of this 4areement Print 13 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE
8. Apply to apply settings or Cancel to cancel changes 64 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom To enable HTTPS users have to create and install a certificate 1 Click Continue to this website to install 3 There is a problem with this website s security certificate The security certificate presented by this website was issued for a different website s address Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server We recommend that you close this webpage and do not continue to this website Click here to close this webpage Gei More information 2 Enter the User name and Password of the camera Connect to 192 168 1 1 The server 192 168 11 at Brickcom IPC4M Login requires a Username and password Warning This server is requesting that your username and password be sent in an insecure manner basic authentication Without a secure connection User name f admin w Remember my password 65 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom 3 Click Certificate Error on the top right corner of the window to view the certificate Go https 192 168 1 103 v Certificate Err X Fie Edit wiew Favorites Tools Help k Mismatched Address SES agi The security certificate presented by this website was issued for a different website s address Ww
9. COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Username Password 3 PPPoE Point to point over Ethernet Use this mode if connecting to the Internet through a DSL Line A NOTE To utilize this feature it requires an account provided by an Internet Service Provider Enter the user name and password provided by the ISP Click Apply to apply settings or Cancel to cancel changes 4 3G Use this option if using a 3G SIM card to transmit video audio surveillance over a 3G network IP Settings FC EE Dial Number 99 PIN Code 0000 EE A NOTE This function is only available for GOB models a Enter the APN Access Point Number Dial Number PIN Code User Name and Password provided by the ISP b Click Apply to apply the settings The message below will be displayed if the 3G settings were successfully applied bann mn hy SN em e pm n Settings successfully updated Please reconnect it via UPnP service c Before disconnected the wired connection with the network camera obtain the IP Address by opening EasyConfig The 3G connection IP Address will be displayed in the IP Address column 53 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Please double click the camera you want ta Connect trom the list EES Te Ma Ladpace BK SOUT Eas ors SST III e GE a a es A TLRS Ap dab2 66e 1 d The network camera can now be accessed over a 3G network To ac
10. default viewing direction and zoom level After clicking the Setting button the Zoom in and Zoom out buttons Brightness will show up speaker volume PF ALE dl 49 WWW BRICKCOM COM EXPERTIN WIRELESS IP SURVEILLANCE Brickcom On the PTZ control section click the arrow marked by 3 on the picture for the Preset Point and Patrol section to come up To set up the pre set point s e Preset Point Current Position 1 Determine the desired viewing direction and zoom level using a C2 the PTZ commands Pre set 1 7 s _ 2 Enter the name into the Current Position field ex Pre set 1 Patrol Settinas Description ES then click to create a new pre set point Click to batroli Erim delete an existing pre set point Edit Patrol s T 3 On the drop down list below the Current Position field the Preset Duration user can view all the configured pre set points When the user E E selects a pre set on the drop down list and clicks besi the image corresponding to the preset will be Immediately displayed To set up the patrol rule s 1 Enter the name into the Description field then click to create a new patrol rule Click to delete an existing rule 2 On the drop down list below the Description field the user can view all the configured patrol rules When the user selects a patrol rule on the drop down list and clicks bel the BRC64 PC NVR will run this r
11. help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation A IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body This transmitter must not be co located or operating in conjunction with any other antenna or transmitter The availability of some specific channels and or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination The firmware setting is not accessible by the end user WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Product Comparison WCB 100Ap Board Lens ds 1280x800 STI CB 101Ap Board Lens V2 1 CB 102A e CS Mount V2 1 WCB 500Ap Board Lens CB 500A 2592 x 1944 pixel Series CB 502Ap CS Mount WCB 502Ap CS Mount Panomorph 2592 x 1944 pixel S WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Package Cont
12. password for future convenience Itis not recommended to check this box when viewing the camera feed from a public computer 28 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Installing the Plug In For the initial access to the camera in Windows the web browser may prompt the administrator for permission to install a new plug in for on Internet Explorer Permission request depends on the Internet security settings of the user s PC or notebook If the highest security level is set the computer may prohibit any installation and execution attempt This plug in has been registered for certificate and is used to display the video in the browser Click on o ntal to proceed If the web browser does not allow the administrator to continue the installation check the Internet security option and lower the security levels or contact the networking supervisor or IT for help internet Explorer Security Warning Do you want to install this software ve Name Brickcom cab Publisher BRICKCOM CORPORATION Is More options Install Don t Install while Files From the Internet can be useful this File type can potentially harm our computer Only install software From publishers vou trust What s the risk Anote If an error occurred or the plug in fails to install it is because the version of the Electronic Signature is newly released and the VeriSign has not been submitted to Microsoft Window
13. the camera After checking the hardware connection run the Installation Wizard program included on the products CDROM to automatically search the intranet for the camera There may be many cameras on the local network Differentiate the cameras using the serial number which is printed on the labels on the carton and the bottom of the camera 1 Insert the Installation CD into the CD ROM driver Run Auto Run Tool directly from the CD ROM to start the installation When installing the Brickcom software kit for the first time select a desired language for the interface The available languages are listed in the scroll box Click lt Install gt and follow the steps to install the EasyConfig wizard on the desired computer P BricKkcom Softwa Kii Quick Guide Install Adobe Reader 2010 Brickcom Corporation All Rights Reserved 12 EXPERT IN WIRELESS IP SURVEILLANCE rickcom 2 In the Install Shield Wizard dialog box click lt Next gt to continue Welcome to the InstallShield Wizard for Brickcom Software Kit The InstallShield Wizard will install Brickcom Software Kit on your computrer Click Next to continue or Cancel to exit the install Wizard 3 Read the End User License Agreement and check the option I accept the terms of the license agreement Click lt Next gt to continue License Agreement Please read the following license agreement carefully End User License Agreement IMPORTANT READ CAREFULLY
14. 0 26 52 1b dbic FB 10046 FO 1004p 3456 192 166 100 10 00 00 00 12 34 56 FO 1004p FE 1004p dad 192 166 100 22 00 26 82 1bidaid FB 1004p WFB 1004e de31 192 166 100 24 00 26 52 1b de 31 WFB 10046 FB 100 4p db54 192 168 100 235 00 26 62 1b db 54 FB 1004p WEFB 1004p 0035 10 5 42 201 00 40 25 00 00 35 WFE 1004p 1 d 5 4 z 6 T 5 J 4 Enter the username and password of the camera For first time use the default username and password are admin admin Please enter the username and password of the camera Password 22 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE 5 For configuring the IP address settings select either lt Settings remain the same gt lt Automatically obtain an IP Address DHCP gt or lt Set IP Address configuration manually gt The DHCP setting is recommended Brickcom select the IF Address settings Settings remains the same Automatically obtain an IP Address DHCP Set IP Address configuration manually a If lt Set IP Address configuration manually gt is selected the following pages will be displayed Brickcom select the IF Address settings Settings remains the same Automatically obtain an IF Address DHCP Set IP Address configuration manually 23 EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Enter the Static IP Address to configure IP Camera IP Address 10 5 42 103 subnet Mask DNS1 DNS2
15. 0 MD 500Ap p Domain Name Easy Link Generic RTSP Click here to preview IP Address 192 168 10 65 Http Port Gi Username adm Password VO Settings Modet Brickcom P Camera OSD Settings Record Stream Type Liveview Stream Type v Site Name Stream Type Streami Date Time Camera Name MO 5004p 360 023C Video Coder H 264 Panorama Settings 4 Video Resolution 2032x1536 v Enable III Audio Codec G 711 Lens Type Immervision A8STRT FishEye Immervision A0 V Export import OK JP CANCEL immervision ASTRT WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Immervision ASTRT For the 360P cameras ex MD 300Np 360P please select Immervision A8TRT g Settings x ex Camera Sequence M Storage Video Wall NYS Settings A System Joystick Cameras Connect to Camera d d Sie Name MD 500Ap 360 0230 7 Auto _ Site Name Camera Na 1 MD 500Ap 360 0230 MD S00Ap p Domain Name Easy Link Generic RTSP Click here to preview P Address 192 168 10 ee Http Port et Username adman Password i VO Settings Modet Brickcom P Camera S em a OSD Settings Record Stream Type Liveview Stream Type d Site Name Stream Type Stream 1 v Date Time Camera Name MO 5004p 360 023C Video Codec H 264 Panorama Settings 4 x Video Resolution 2032X 1536 v Enable Audio Codec G 711 Lens Type immervision ABTRT FishEye Immervision ADM Export import OK CANC
16. 2 165 10 3 192 168 110 130 192 165 10 60 192 168 10 51 192 168 110 124 ac 51 12 01 4473 OO 22 4620230 00 26 82 74 7h a5 00 26 82 bE 3c d9 00 24 t4 01 03 45 00 26 11 22 55 11 00 11 6b 40 61 74 00 26 82 74 76 11 00 26 3201 b db 03 DU 26 852 d1 p3 65 ac 51 12 34 4854 FB 3004p Brickcom FB 1004p PZ 0400 Brickcom 3 Brickcorm 3 1100 FB 1004p FE 1004 p FB 1304p OB 1004e wd Dt Wo 2 6 3 1 0 7 3 1 0 4 Wo 23 GEES 1 1 5 3 3 1 0 7 3 1 0 7 3 1 01 wo OF Already in Site L Already in Site L Search again Add Drag the camera from the camera tree list to the live view window The live view window will show the camera s image as below Brickcom PC NVR MD 500Ap 360 0230 2013 07 08 10 47 19 me sss ii Eet 42 een OB 100Ap b030 a 03 PZ 040D 3cd9 e PZ 0400 3cd9 04 FB 300Ap 447a E FB 300Ap 447a 05 GMD 100Ap 3933 GMD 100Ap 3933 06 WFB 300Ap 435f EN WFB 300Ap 435F 07 MO 500Ap 360 02 EN MD 500Ap 360 02 v Brightness rt Speaker Volume EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Click L Ze and choose Settings in the menu Alarm amp Event Setting Account Manage In Panorama Settings click Enable and select the lens type of the selected camera 4 Settings X Camera amp Sequence M Storage e Video Wall NVS Settings A System S Joystick Cameras Connect to Camera Site Name Camera Na 1 MD 500Ap 360 023
17. 6 If the camera supports the EasyLink function the following page will be displayed Otherwise this page will not be shown If desired click lt Skip gt to skip this setting Brickcom EasyLink Settings ou can use EasyLink Settings to connect to the IP Camera without knowing the IP address EasyLink Mame 0026821 bdbtd FE ea EL TT E http 0026821 bdbtd mybrickcom com Brickcom WEB 100Ap Camera Configuration Utility Enter the EasyLink URL into a web browser to access the camera s web GUI 24 EXPERT IN WIRELESS IP SURVEILLANCE Brickcom EasyLink is a unique Brickcom function which allows users to assign a unique EasyLink name to their network camera s IP address There is no need to configure the router to open up ports or remember hard to memorize IP addresses When this feature is enabled users can log onto uniqueEasyLinkname mybrickcom com to view the camera s web GUI and live view 1 Enter a unique EasyLink name whose length must be between 5 32 characters 2 When finished click the arrow button to continue 3 NOTE See page 42 for more details about the EasyLink function 25 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE 7 When the IP address settings have been configured the screen will either display a successful or failed connection message If the connection failed either try again or quit the installation a If DHCP IP address settings was selected t
18. 98 Thu Jan 1 00 09 18 2009 LOG _INFO stream Channel 1 stopped streaming to host 169 254 209 1987 Thu Jan 1 00 09 58 2009 LOG_INFO Wireless Wireless connection for SSID Brickcomy is up Thu Jan 1 01 44 31 2009 LOG WARNING VVireless Wireless connection for SSID Brickcom is down Thu Jan 1 02 44 18 2009 LOG NOTICE WebServer User admin logged in to web server Thu Jan 1 02 48 40 2009 LOG_INFO stream Channel 1 started streaming to host 164 264 209 1987 Thu Jan 1 02 48 48 2009 LOG _INFO stream Channel 1 stopped streaming to host 169 254 209 1987 Thu Jan 1 02 52 02 2009 LOG WARNING Vireless Connection to wireless module was lost Internal module is either down or notresponding Thu Jan 1 03 16 50 2009 LOG WARNING VVireless Wireless connection for SSID Brickcom is down Thu Jan 1 03 16 5 LOG WARNING VWireless Wireless connection for SSID Brickcomy is down Thu Jan 1 03 17 2 LOG NOTICE WebServer User admin logged in to web serwer Thu Jan 1 03 18 39 2009 LOG NOTICE WebServer User admin logged in to web serwer Thu Jan 1 03 44 41 2009 LOG NOTICE WebServer User admin logged in to web sewer Thu Jan 1 03 24 48 2009 LOG WARNING Wireless Wireless connection for SSID Brickcomy is down Thu Jan 1 03 36 20 2009 LOG WARNING VWireless Wireless connection for SSID Brickcom is down Thu Jan 1 03 36 46 2009 LOG NOTICE WebServer User adminy logged in to web serwer Thu Jan 1 03 42 10 2009 LOG INFO stream Channel 1 start
19. Brickcom Megapixel Cube Network Camera CB 100A CB 500A Series Users Manual Quality Service Group Brickcom Product name Network Camera CB 100A CB 500A series Release Date 2013 7 Manual Revision V2 3 Web site www brickcom com Email support brickcom com info brickcom com 2013 Brickcom Corporation All Rights Reserved WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Table of Contents Before You Use This POLE ass aa as ae at ue 0 POC VAIN e RE 0 FREQUIGLOLY le elt Le EE 1 geil Leg COMPAQ ee in 0 Package Ee En EE 0 Cube Network Camera Overview iii 2 Device Appearance Description iii 4 D BORMES ee ASO E 9 EECHELEN 9 Gamera COMO CUO Oat eege ege 10 BA eg e Teen ee ee er eee 10 SOT CIS Call UC Di a ue 12 SE Ee Me EE 19 Accessing the Network Camera 28 Check Network Settings eieiei Eddie 28 Add Password to Prevent Unauthorized Access 28 PEUTIC TVG a OW a dt 28 MSAN ING PO E 29 EVE VA OW 30 OFT CIN ATION D 33 Camera VSO UO a a TEADA ee 33 CAMELS E E nage 33 VOCO MEET 35 e Ve E 39 es A E E E E e 40 Privacy Mask Control EENEG 41 Enabling De warp Function For Camera 42 Network ZEN fi OE 52 IP Settings VS 7 52 Oi md aT GEN WT a 54 DDNS dynamic domain name service 55 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom SEC AI E E E 56 EEN 58 ES E E E E 64 EVO e E E E ee eee 67 Sue EE 67 MOOD B Yer 6 E 11 AR E E E 12
20. EL immervision ASTRT A In the preview window you can see an oval image with the black background If you do not get the oval image the de warp function will not work properly Click OK to save and apply the panorama settings 44 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom FishEye For the 360C cameras ex MD 300Np 360C please select FishEye 4 Settings x Camera Sequence Storage e Video Wall NVS Settings A System Joystick Cameras Connect to Camera d d Cas Mamer MD S00Ap 360 0230 7 Auto _ Site Name Camera Na 1 FB 130Np fb2a FB 130Np 1 2 OB 100Ap b030 OB 100Ap PF Domain Name Easy Link Generic RTSP 3 PZ 040D 3cd9 PZ 040D 3 D ae Click here to preview 4 F8 300Ap 4478 FB 300Ap P Address 5 GMD 1004p 3933 GMD 100A Http Port EC 6 WFB 300Ap 435f WFB 3004 7T MD 500Ap 360 0230 MD 5004 ne e Username adman Password VO Settings Modet Brickcom P Camera E em l F OSD Settings Record Stream Type Liveview Stream Type v Site Name Stream Type Streami v Date Time Camera Name MO 5004p 360 023C z Video Codec H 264 Panorama Settings 7 5 Video Resolution 2032x1536 v Enable aude Codec G 711 re Export import OK CANCEL A In the preview window you can see a circular image with the black background If you do not get the circular image the de warp function will not work properly Click OK to save and apply the panorama setting
21. ERT IN WIRELESS IP SURVEILLANCE Brickcom PIR The PIR Passive InfraRed sensor measures infrared light radiating from objects in its field of view This can be used to detect a moving object such as a person in dimly lit areas Sensitivity Adjust the sensitivity of the PIR Sensor from the drop down menu The sensitivity can be set from 10 100 with the default sensitivity set at 50 Higher sensitivity levels will increase the range of the PIR Sensor When the sensitivity level is set to 100 the PIR sensor will be able to detect moving objects within six meters Audio Detection Audio Detection Apply Cancel Users can schedule an event to be triggered if there is a change in the sound level of a monitored area Audio detection can be used to measure change in the ambient voice Select the sensitivity from the drop down menu Sensitivity is used to adjust the sensitivity of the sound level from 10 100 The default sensitivity is 50 i 60 Display the current sound level Click Apply to apply settings or Cancel to cancel changes 72 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Notifications Use the tools in this section to specify what type of notification will be sent when an event occurs The camera can send buffered images to an FTP server Samba Email or HTTP FTP Settings File Transfer Protocol FTP is used as an application component to automatically transfer fi
22. IR WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE rickcom v Select programs to create shortcuts Click lt Next gt to continue Brickcom Software Kit InstallShield Wizard Edi Des a GE ee SG Setup Type Select the setup type that best suits your needs The InstallShield Wizard has successfully installed Brickcom Software Kit Click Next to continue M Create Desktop Shortcut F2 Create Quick Launch Shortcut H Create StartMenu Shortcut vi The installation information will be displayed Click lt Next gt to continue Ed Brickcom Software Kit InstallShield Wizard Please read the following text Current Settings Setup Type Custom Select Features EasyConfig PC NVR Standard Choose Destination Location EasyConfig C Program FilesiBrickcomEasyConfig PC NYR Standard C Program FilesiBrickcomiPC N R StandardiExe Creating shortcuts EasyConfig Create Desktop Shortcut Create Quick Launch Shortcut Create StartMenu Shortcut PC NYR Standard 17 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom 5 To launch EasyConfig or PC NVR Standard select the application and click lt Finish gt When launching the PC NVR program please refer to the PC NVR user manual Brickcom Software Kit InstallShield Wizard installation Complete Thank you for choosing Brickcom iv Do you w
23. RT cameras such as the normal PTZ capable display simultaneous quadruple PTZ capable display and the 180 perimeter display To select the display mode please right click on the FishEye Immervision AO V Immervision A8TRT camera image for the menu to pop up Then select Image Effect Panorama gt Display Mode Under Display Mode 3 options are available PTZ Quad Perimeter Select this option for the single display The PTZ commands are applicable Select this option for the 2x2 quadruple display The PTZ commands are applicable to each of the displays just like controlling 4 different cameras Select this option for the 180 horizontal panoramic image 48 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom Fm PTZ Control Panel d gt 01 FB 130Np b22 Click the PTZ Setting button marked by 1 on the picture on the Pa FB 130Np fb2a control panel to show the PTZ control section marked by 2 on 02 OB 100Ap b030 i e OB 100Ap b030 the picture The PTZ control section consists of 8 directions and 03 PZ 0400 3cd9 the Home button at the center jm P2 040D 3cd9 04 FB 300Ap 447a EN FB 300Ap 447a 1 Click the direction buttons to change the viewing direction d gt 05 GMD 100Ap 3933 E GMD 100Ap 3933 on the image 06 WFB 300Ap 435f 2 Click the Home button at the center of the PTZ control EN WFB 300Ap 435F 9 WM gt 07 MD 500Ap 360 0230 section to revert to the
24. URVEILLANCE Brickcom Pilg The power adapter into the camera s power port Phen connect the other end into the power outlet POWER Bie Fliease check that the LED light is on SOCKET CAMERA Sth ETHERNET PORT a POWER e Gei CH Ge JLA des A 2 Select either Simple Mode or Professional Mode to obtain the camera s IP settings If Simple Mode is selected EasyConfig will set up the connection automatically If Professional Mode is selected the user will need to configure the IP settings manually Brickcom If simple mode is selected the easy configuration program will set up the connection automatically f professional mode is selected the User will need to configure the IP manually The DHCP setting is recommended If userwants to set the IP address manually please refer to the product user manual Simple Mode Professional Mode 21 EXPERT IN WIRELESS IP SURVEILLANCE Brickcom 3 There may be many cameras in the local network Differentiate the cameras using their UPnP name Double click on the camera from the survey list to connect den Rain ls Please double click the camera you want to connect from the list UPnP Name IP Address MAC Address Model Name Firmware FB 10084 dabz 142 165 100 21 00 26 62 1bida bz FB 100Ap FD 100Ap 000d 192 168 100 12 00 26 82 14 00 0d FO 1004p FD 1004p FFrd9 1927 166 100 11 00 26 52 19 FF d9 FO 1004p FB 1004e dbc 142 165 100 20 0
25. able streamline design make it the perfect additional for any home or office Because of its many advanced features the CB 100A CB 500A series has many versatile applications Users can easily monitor the safety of their family members pets office valuables and property ef Small Office Surveillance Security systems for small offices can be expensive and difficult to install and maintain With the EasyConfig software the CB 100A CB 500A series can easily be installed and configured by anyone without extensive technical knowledge The video can be reviewed remotely so business owners can monitor office safety and employee productivity at all times d Residence monitor Home owners worry about their house and property when they are away The CB 100A CB 500A series has a built in PIR sensor which can detect unauthorized movement in a residence Once movement is detected the illumination LED will be triggered and an alert with a snapshot can be emailed or sent through an MMS to the user s portable device Elderly and Child Care A high concern for many people is the safety of elderly relatives and small children Users can use the CB 100A CB 500A series camera to ensure the safety of their loved ones by use of the live view and intercom functions WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Aa The motion detection feature can be used to create forbidden areas in the home which the pe
26. ake E Live View This problem may indicate an attempt ta fool you or intercept any data you send to WCB 100Ap Camera Configur WER We recommend that you close this Webpage Stream 1 v About certificate errors 2005 01 01 00 06 44 H 264 1280x800 Playing View certificates pra Contre 4 Click Install Certificate and follow the steps to finish the installation Certificate General Details Certification Path L Certificate Information This certificate is intended for the following purpose s eEnsures the identity of remote computer Issued to Brickcom Issued by Brickcom Yalid from 7 3 2009 to 7 3 2029 Install Certificate 66 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Event Event Settings When an event such as unauthorized movement occurs the camera can be scheduled to perform certain actions An Event Type is a set of parameters that defines these actions This section describes how to configure the camera to perform certain actions when events OCCU Event List pe em Pei ction Note For stream recording stream 1 must be setto H 264 or MPEG4 with a bitrate lower than 1 5Mbps or the quality below 3 and the resoltion lower than 1280x1024 Add Event Delete Event Click lt Add Event gt on the Event Settings page The Event Setup page will appear Event Settings Event List Cep bm Dein Note For stream re
27. ame in filename out filename pass arg e d a base64 A k password kfile filename K key iv IV S salt salt nosalt z md p P bufsize number nopad debug none engine id For example openssl enc d aes128 in encryptfile out decryptfile k password Click Apply to apply settings or Cancel to cancel changes LED Indicators The LED on the front of the camera can be configured to remain unlit Check OFF to enable 84 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom this function LED Indicators LED Indicators Configuration Click Apply to apply settings or Cancel to cancel changes 85 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Maintenance User Management This section explains how to enable password protection and create multiple accounts User Management User Management Add The administrator account name is admin which is permanent and cannot be deleted Click Add to create an account User Management User Management Enter the new user s name password and confirm password Administrators can add up to 10 user accounts Select the privilege level for the new user account from the drop down list Privilege levels can be assigned as 86 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom Administrator user has acc
28. antto launch the application right now EasyConfig PC NVR Standard Finish 18 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom EasyConfig To launch EasyConfig select EasyConfig from the start menu If Complete Setup type was used in the software installation an EasyConfig icon was installed on the desktop Double click to open the icon Rasylontig lf Custom Setup type was used in the software installation and an EasyConfig icon was not installed on the desktop the program will be installed under C Program Files Brickcom EasyConfig unless the program was saved to a preferred directory 1 Click lt Start gt to continue The program will automatically search for the camera in the intranet A NOTE Check Skip the hardware installation guide to skip checking the hardware connection To check the hardware installation settings do not check the option box Thank you for choosing Brickcom EasyContig will help you easily configure your Brickcom IP Camera Select Lanquage English 2010 Brickcom Corporation All rights reserved 19 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom network switch or router Co nn ect i on pan Plug one end of the supplied network cable into your NETWORK CABLE Brickcom Plug the other end of the supplied network cable into the Camera s Ethernet port CAMERA ETHERNET PORT 20 EXPERT IN WIRELESS IP S
29. ase wait a moment When completed the live video page will be displayed in the web browser 89 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE
30. automatically when the upgrade is finished Firmware Upgrade Select a File Upgrade Configuration This feature allows the user to export import the configuration files of the network camera Import Export Click export to pop up a dialog to indicate the location and file to export Click browse to indicate the location and file of the camera configuration and click import to import the configuration file back into the network camera Import Export Please select a file to import import 88 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Reset to Default This section is used to restore the camera to default factory settings Check the boxes to preserve the IP Wireless Date and Time EasyLink or Language settings Click Apply to restore the camera to default factory settings Reset to Default Press the Apply button to restore the network camera to factory default except settings in iP settings Wireless settings CL Date and Time settings LC EasyLink settings F Language settings Reboot Fress Button to Reboot This feature will reboot the camera Click Apply to begin A message will pop up asking The device will reboot Are you sure Click OK to continue The camera will take about one minute to reboot Microsoft Internet Explorer d SE S d The device will reboot Are you sure The following message will show during the rebooting process Ple
31. be installed Web Browser Microsoft Internet Explorer 6 0 SP2 or higher Adobe Reader Adobe Reader 8 0 or higher Audio The audio function will not work if a sound card is not installed in the PC Audio may be interrupted depending on network traffic WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Camera Connection warming Hot Please attach the bracket before using CB 500A Series Terminal 1 0 Connector Block Connection Attach the supplied connector block to the terminal connector on the camera Refer to the diagram below to attach external devices to the connector block 1 Ground 2 Digital Input 3 Digital Output 4 Power 5V Basic Connection 1 Connect the supplied power cable from the camera to a power outlet 2 Connect the camera to a switch using an Ethernet cable CB 100A Series 10 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom CB 500A Series When powering up the power LED will light up and the camera will boot up The status LED will turn amber when the camera is obtaining the IP address After obtaining the IP address the link LED will flash orange while the network connection is processing 11 WWW BRICKCOM COM EXPERTIN WIRELESS IP SURVEILLANCE Software Installation In this manual User refers to whoever has access to the Network Camera and Administrator refers to the person who can configure the camera and grant user access to
32. cess the video feed through the internet open a web browser and enter the network camera s IP address A dialog window will pop up requesting a username and password As stated on the previous page the default username and password for the Administrator account are WA mr admin admin PRE RE MAO RBA TAT HAH iy FAIRE E aboutblank Live View A E J ARD RHEO IA com OB 100Ap Camera Configuration Utility 2009 01 01 04 38 13 H 264 1280x800 Playing Camera Control Panel KS n 0 TR Speaker Volume UPnP Universal Plug and Play UPnP simplifies the process of adding a camera to a local area network Once connected to a LAN the camera will automatically appear on the intranet Click Enable to enable this function and enter an UPnP name which the camera will appear under on the intranet 54 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom O oe cs oz Click Apply to apply settings or Cancel to cancel changes DDNS dynamic domain name service DDNS links a domain name to an IP address allowing users to easily access their camera even with a changing IP address Brickcom network cameras are compatible with three DDNS service providers 1 DynDNS 2 TZO and 3 No IP Anote Before utilizing this function please apply for a dynamic domain account from a DDNS provider DynDNS DynDNS Enable the DynDNS to allow the camera to have a fixed host and doma
33. cording stream 1 must be setto H 264 or MPEGA with a bitrate lower than 1 5Mbps or the quality below 3 and the resoltion lower than 1280x1024 Add Event Delete Event ER 9 Always Event Schedule O Schedule O Recurrence Pattern Motion Detection Window1 TT Window Window 3 Save Streamto FIP Send Snapshotto FIP s Play Audio Clip There is no available audio clip Configure one here send HTTP Notification Send to Email LED Light _ Send UDP Notification to IP address Port ET Send Multicast Notification to IP address Port L eil pe How to Set Up an Event Schedule Event Schedule describes how and when the camera performs certain actions 1 Check Enable and enter a descriptive name for the event schedule 67 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom 2 Set Event Schedule to define when the event is activated by selecting from Always 24 hours Schedule or Recurrence pattern a If Schedule is selected from the Event Schedule the following page will be displayed Always Schedule prie ae Mon mue TITI 1111111 RE Wed nn Event schedule Not Scheduled Event Schedule Clear All Undo Al S Recurrence Pattern Motion Detection E Window1 E Window CO Window 3 C Save Streamto SD card C Send Snapshotto FIP s E Play Audio Clip There is no available audio clip Configure one here El Send HTTP Notification E
34. e ranges from 1 to 30 fps When MPEG 4 is selected the frame rate ranges from 1 to 15 fps Set a higher frame rate for smoother video quality Video quality and bit rate Choose either quality or bitrate to control the video quality with video codec at H 264 or MPEG4 Only quality can be chosen when video codec at MJPEG is selected Set the bitrate higher for a better video quality Transport RTP The Real time Transport Protocol RTP defines a standardized packet format for delivering audio and video over IP networks 36 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom RTP with Quantization Table Header Choose this option to explicitly include JPEG quantization table in the RTP stream RFC 2435 section 3 1 8 HTTP Transport If MJPEG is used for Video Codec HTTP Transport protocol must be enabled to remotely access the video stream A NOTE a higher bitrate will use higher network bandwidth The video quality can be set between Level 1 to Level 6 with Level 6 producing the best image quality HTTP Transport If MJPEG is used for Video Codec users can enable HTTP Transport protocol for video communication A NOTE HTTP Transport is for non IE browser used only Click Apply to apply settings or Cancel to cancel changes Video Overlay Stream RTSP Serwer Save File Folder Advanced Settings Timestamp Text eame O B The video overlay will only take effect in stream 1 Time
35. ected either before or immediately after the software installation The Administrator should complete the network settings on the configuration page including entering the correct subnet mask and IP address of gateway and DNS Ask the network administrator or Internet service provider for the detail information Add Password to Prevent Unauthorized Access The Administrator should immediately implement a new password as a matter of prudent security practice For first time use the user name and password for the Administrator are assigned as admin admin After the Administrator changes the Administrator password the web browser will display an authentication window to confirm the new password Once the password is set there is no provision to recover the Administrator s password If the Administrator s password is lost the only option is to restore the original factory default settings The Administrator can set up a maximum of ten 10 user accounts Users will be able to access the Network Camera but will not be allowed to access system configurations Authentication To access the camera s live view open a web browser and enter the IP address of the camera A dialog window will pop requesting a username and password As stated on the previous page for the default username and password for the Administrator are assigned as admin admin For accounts other than the administrator s account the user can choose to remember the
36. ed streaming to host 169 254 209 198 Thu Jan 1 03 42 20 2009 LOG INFO Wireless Wireless connection for SSID Brickcomfy is up Thu Jan 1 04 20 37 2009 LOG WARNING VVireless Wireless connection for SSID Brickcom is down Thu Jan 1 04 31 08 2009 LOG_INFO stream Channel 1 started streaming to host 169 254 209 198 Thu Jan 1 04 31 52 2009 LOG_INFO stream Channel 1 stopped streaming to host 169 254 2091987 Thu Jan 1 04 33 06 2009 LOG_INFO stream Channel 1 stopped streaming to host 169 254 209 1987 Thu Jan 1 04 35 54 2009 D 1 This page displays the systems log in chronological order The system log is stored in the camera s buffer area and will be overwritten when the buffer area is full Click Retrieve to retrieve the log or click Save to file to save the system log 79 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom Remote Logging System Log Remote Logging Pepe Jo IP Address lt I SES The user can configure the camera to send the system log file to a remote server as a log backup Click to enable remote log and enter the IP address of the remote server Enter the port number of the remote server Click Apply to apply settings or Cancel to cancel changes Date and Time Manual Manually enter the date and time Clone from PC The camera will sync with the time date and time zone of the computer used to modify the camera settings Check Clone to utilize this optio
37. ed to enable the highest level of encryption supported by the network equipment Site Survey Survey the local area for available wireless networks The user should select their Local Area Network LAN from the Site Survey List Basic Settings Advanced Settings Wi Fi Protected Setup Network Name SSID B rickcom Disabled Site Survey List o test garn Brickcom_1 116gm NONE Ut 78 infrastructure _ SmartHub AWRT 00N 11bain NONE Infrastructure Di BRNO TEST 44 hair dfeidleg EN E OB lesbr zaebet eht tres Go slact x 59 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom WEP Wired Equivalent Privacy WEP is a basic encryption method which transmits network broadcast messages using radio signals It is not as secure as WPA Basic Settings Advanced Settings Wi Fi Protected Setup Network Name SSID Brickcom j Security wep va weree eee Site Survey List a Sinartub AiNRTBOON NONE Selec be NUD TEST aahi Matte 4 sont ot h Tx Key Select a key from the drop down menu WEP Encryption Select a level of WEP encryption 64 bits 10 hex digits or 128 bits 26 hex digits The default is 64 bits 10 hex digits Key 1 4 Enter the WEP key s manually Authentication The default is set to Open System which allows either Shared Key or Auto authentication to be used Wit
38. ents Please check to make sure the product package contains all the accessories listed below a Network Camera b Product CD d Warranty Card Warranty Card e Terminal I O Connector Block f Easy Installation Guide ee e eee g 1 5m White Flat RJ 45 cable h Power Adapter For CB 100Ae CB 100Ap only A NOTE These are optional features Please refer to the Product List for the full list of optional features that are available for this product WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Cube Network Camera Overview The compact Brickcom CB 100A CB 500A series Cube network series offers a high quality video surveillance solution for residences and small businesses Unlike a general webcam this camera series is a standalone surveillance system that does not need to be connected to a computer EasyLink is a feature of the CB 100A CB 500A series camera which allows for users to simply plug in the camera to any home or small business network and play the video This camera series offers a user friendly and unique design which allows anyone without a technical background to use it It features live video feed and two way audio which can be used over a local area network LAN through any internet browser or via any 3G mobile device The wireless capability makes it easy to mount on any surface The CB 100A CB 500A series features many cutting edge functions and its fashion
39. er the actions when the DI status is high Low profile Night this profile will trigger the actions when the DI status is low Current status High Apply Cancel Digital Inputs Only available with models with a DI terminal Select Digital Input to have the profile management controlled by an external sensor Select profiles from the drop down menu Profiles will change according to different trigger voltage levels Click Apply to apply settings or Cancel to cancel changes Video The Network Camera offers two separate streams for different viewing options 35 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Video Overlay RT SP Server Save File Folder Advanced Settings Stream 1 1280x500 Kbps 64 12000 0 30 0 auto Stream 2 E EE o Quality 3 RTP RTP with Quantization Table Header HTTP Transport Note For stream recording stream 1 must be set to H 264 or MPEG4 with a bitrate lower than 1 5Mbps or the quality below 3 and the resoltion lower than 1280x1024 Stream 1 amp Stream 2 Aspect Ratio Select the width to height image aspect ratio Video Codec The Network Camera offers three choices of video codec standards for real time viewing H 264 MPEG 4 and MJPEG Video Resolution Select from the drop down menu to choose the best resolution recording settings Frame Rate Select the frame rate from drop down menu When H 264 or MJPEG is selected the frame rat
40. esiBrickcomPC NVR StandardiExe Creating shortcuts EasyConfig Create Desktop Shortcut Create Quick Launch Shortcut Create StartMenu Shortcut PC NYR Standard b If CUSTOM SETUP is selected I This option is recommended for advanced users It can be used to install the system to a preferred directory or to select specific program feature s ii Check the option Custom and then click lt Next gt Brickcom Software Kit InstallShield Wizard x Setup Type Selectthe setup type to install Please select a setup type Complete All program features will be installed Requires the most disk space Select which program features you want installed Recommended for advanced Users Cancel 15 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom lil Select the features to install Click lt Next gt to continue gt f Brickcom Software Kit InstallShield Wizard x Select Features Select the features setup will install ou do not want to install infig 8211 K Be re a en Space Availableon C Cancel iv Click lt Change gt to change the appointed folder where installation and program files will be stored Click lt Next gt to continue Brickcom Software Kit InstallShield Wizard Fa Choose Destination Location Select folder where setup will install files e CN Install Brickcom Software Kit to CAProgram FilesiBrickcom a Cancel W
41. ess to view and change the Configuration page Users with administrator privilege can change other user s access rights and delete user accounts Click Delete or Update to delete or modify a user s account Viewer user can only access the main page for live viewing Remote Viewer user can only access the main page for live viewing using TCP protocol Language Language Auto Deutsch o English Espa ol Fran ais Italiano Bae Polski Pyeckui T rk e D HEt D d Portugu s EAXMK O Nederlands Apply Cancel Select the desired language from the radio button Click Apply to apply settings or Cancel to cancel changes IP Filter The IP Filter is used to filter the IP addresses which are able to access the network camera Enable the IP Filter and select to allow or deny a range of IP addresses access to the server Click Add to list to add the IP range to the IP filter list IP Filter Enable IP Filter E Allow Access List Deny Access List Click Apply to apply settings or Cancel to cancel changes 87 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Firmware Upgrade This feature allows the user to upgrade the camera firmware It will take a few minutes to complete the process A NOTE Do not power off the camera or camera during the upgrade Upgrade Click Browse and specify the firmware file Click Upgrade The camera will begin upgrading and will reboot
42. f the recorded files by moving the mouse pointer over the file or double click on a file to play it Right click on the folder to download play or delete the recorded files A NOTE The user may need to install QuickTime multimedia framework to play the video clips 83 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom Advanced Settings Storage Management Advanced Settings File Encryption mn e If the Automatic Recycle function is disabled there must be at least 50MB Hard Drive space available for the network camera to record video If the Automatic Recycle function is enabled it will automatically overwrite the recorded files when the available space remaining is less than 100MB O Amy Automatic Recycle Enable to automatically overwrite older files when the available space remaining on the Micro SD SDHC card is less than 100MB If the Automatic Recycle function is disabled there must be at least 50MB hard drive space available for the camera to be able to record video files Offline Record Enable to keep recording if the Network Camera is offline File Encryption Enable the File Encryption to encrypt recorded video files Files are encrypted using OPENSSL To unlock the encrypted file please download and install the OPENSSL toolkit from the OPENSSL Web site http gnuwin32 sourceforge net packages openssl htm Use the following command to encrypted file openssl enc ciphern
43. fter an event is triggered Pre alarm buffer Images can be stored internally on the server from the time immediately preceding the trigger Enter the desired length of time Post alarm buffer Images can be stored internally on the server from the time immediately following the trigger Enter the desired length of time Maximum buffer size Specify the maximum file size allowed Click Apply to apply settings or Cancel to cancel changes 76 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Audio Clip Audio Recording Audio clips can be recording and played when an event occurs Audio Recording Audio Clip List Import Please select a file to import Duration 5 zsm Click Browse to import a file from a local hard drive or network disk Select the file and click Import A NOTE The camera can only play audio clips which are saved as wav files with G 711 u law encoding in 8000 Hz sampling rate To record a new clip using the camera s microphone 1 File Name Enter a file name Duration Enter the number of seconds to record Click Record to record the new audio clip The new audio clip will appear on the audio clip list Ve 2 e Select an audio clip file from the Audio Clip List a Play Select to hear the audio clip b Stop Select to stop playing the audio clip c Delete Select to delete an audio clip d Export Select to export the audio clip to a local hard drive or network d
44. gs please refer to the Audio configuration page Playor Stop Play or stop the video a Recording Record video to a computer Snapshot Capture and save still images aS CE Digital Zoom Enable the digital zoom operation SES Mirror Horizontally reflect the display of the live video Flip Vertically reflect the display of the live video eo Real Size View the object in real size Press it again to switch back to normal 31 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom mode Full Screen Switch to full screen mode Press the Esc key to return to normal Motion Detection Alert Enable the motion detection alert function Mute Turn off the sound wk Talk To communicate through the camera using the computer MIC Set Default Reset to default settings D NOTE 1 The lt Camera Control Panel gt functions have no effect on the recorded video Whatever changes are made to the lt Camera Control Panel gt will not be applied to the recorded video 2 The LED is not for continuous use and has an estimated life span of 30 000 hours 3 The LED cannot be replaced 32 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom Configuration Click lt Configuration gt on the main page to change the camera settings pages A NOTE Only Administrators can access the Configuration page Camera Video Audio Camera Profile Management
45. h Shared Key authentication the sender and recipient use a WEP key for authentication With Auto authentication the sender and the recipient do not use a WEP key for authentication Click Apply to apply settings or Cancel to cancel changes 60 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom WPA Personal WiFi Protected Access WPA Personal Basic Settings Advanced Settings Wi Fi Protected Setup Site survey fE to 63 characters Site Survey List ee Do HUD TEST A 4b ier RIKI o mont ee ae a SC Encryption Supports two encryption methods with dynamic encryption keys Temporal Key Integrity Protocol TKIP and Advanced Encryption Standard AES Select the algorithm type from the drop down menu TKIP or AES The default is TKIP Shared Key Enter the key shared between the Router and the server keys Enter a password of 8 63 characters Click Apply to apply settings or Cancel to cancel changes 61 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom WPA2 Persona WiFi Protected Access WPA2 Personal Basic Settings Advanced Settings Wi Fi Protected Setup Network Name SSID Brickcom Secu CE Shared Key Im to 63 characters Site Survey List PE Dro NUD TEST dahinin KIKIC o roe EE WE K Encryption WPA2 supports AES encryption method with dynamic encryption keys Shared Key Enter the key shared between the Router and the server keys Enter a pass
46. he complete video audio settings information of the camera System Information Network Settings Video Audio Settings Client Information Stream 1 ege fans O we NIA EE Stream 2 Weeer WES erer Joen OOS y mere 3 SSOSCSCSCSC S SS 81 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Wireless Displays the complete wireless information of the camera System Information Network Settings Video Audio Settings Wireless reless MAC Address _ 00 26 82 18 DB 92 Bodo fand Auto 20 40MHz Channel Network Mode BGN Mixed Client Information Displays the RTSP Client You will see a list of RTSP clients with the following information IP Address and channel System Information Network Settings Video Audio Settings Client Information 82 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom Storage Management Storage Management is used to view all the recorded files on the Micro SD SDHC card Storage Management Advanced Settings Local Storage Information i Memory Card Management Reload Remove Format i sd Ci offline 1 schedule Es snapshot Cal videoclip Storage Management Click Reload to refresh the list of recorded files Click Remove to safely remove the Micro SD SDHC memory card Click Format to format the Micro SD SDHC memory card Left click on the folder to list the recorded files The user can either play the snapshot o
47. he failure page will be displayed as below m Brickcom Sorry cannot connect me ra IF camera F 0 1300 has no response please check 1 If your router has DHCP server supported 2 Get computer IP address to 192 166 1 100 and subnet mask to 255 255 2550 if your computer connects to the IP camera directly Please try again or click Finish to quit the installation Ie EE Brickcom Sorry cannot con AO the camera IP CamerafFO 13504p has no response the following settings are recommended Please try again or click Finish to quit the installation IE e 26 EXPERT IN WIRELESS IP SURVEILLANCE Brickcom c If the connection was successful the user will see the message Congratulations The installation of the camera is complete When this window is displayed click lt PC NVR gt to start the PC NVR program lt Live View gt to view the live video from the connected IP camera or lt X gt in the top right corner of the screen to close the installation window To run the PC NVR program please refer to the PC NVR user manual for more information The installation of the camera is complete Once installation is complete the Administrator should proceed to the next section Accessing the Network Camera for necessary changes and configurations 2 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom Accessing the Network Camera Check Network Settings The camera can be conn
48. his option if audio and video become unsynchronized Click Apply to apply settings or Cancel to cancel changes Save File Folder Stream Video Overlay RTSP Server Advanced Settings Recording Folder Path Browse Snapshot Folder Path Browse These settings are used for Recording and Snapshot functions in the Live View page 38 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Recording folder path The destination for saving the recording video files Click Browse to specify the saving path Snapshot folder path The destination for saving the snapshot files Click Browse to specify the saving path and select the format from the drop down menu Advanced Settings Stream Video Overlay RTSP Server Save File Folder Advanced Settings Video usability information VUI Sequence Parameter Set SPS amp Picture Parameter Set PPS Video usability information VUI Enable this feature to insert extra information into the bit stream to enhance the use of the video for a wide variety of purposes Sequence Parameter Set SPS amp Picture Parameter Set PPS Enable or disable SPS and PPS in the H 264 packet Sequence parameter sets SPS which apply to a series of consecutive coded video pictures called a coded video sequence and Picture parameter sets PPS which apply to the decoding of one or more individual pictures within a coded video sequence Click Apply to apply settings or Cancel t
49. his section explains how to configure the Network Camera to enable motion detection Detection Settings Region Settings Sensitivity Threshold Use the mouse to resize or move the Motion Detection Window This chart records the amount of activity within the Motion Detection Window When the activity level is above the threshold the user will be notified The MD setting is only activate in stream 1 Detection Setting Use this setting to enable and define the motion detection windows The user can defined up to three areas on the live view window for motion detection 1 2 3 4 Select lt Window1 gt lt Window2 gt or lt Window3 gt to adjust the motion detection window Check the box to enable the window Use the mouse to resize or move the motion detection window Adjust the Sensitivity level Lower sensitivity levels will result in more activity needed to trigger an event Adjust the Threshold to change the threshold level The higher the threshold the larger objects need to be to trigger an event The chart below the Live View window indicates the activity level of the Motion Detection window When motion is detected by the camera and exceeds the defined threshold a red bar will appear Users can use this feature as a trigger source to send photos or videos to a remote server via email or FTP Click Apply to apply settings or Cancel to cancel changes 71 WWW BRICKCOM COM EXP
50. iew the camera s web GUI and live view 1 Check the box to enable EasyLink 2 If Auto mode is selected the following page will be displayed A NOTE This mode is recommended 3 Enter a unique EasyLink name whose length must be between 5 32 characters Verify that the EasyLink name is available EasyLink The EasyLink function cannot work because the IP camera is behind a Double NAT network 56 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom 4 If Manual mode is selected the following page will be displayed a Manually enter the Public IP Address HTTP port and RTSP port or leave the default values EasyLink Auto Manual The EasyLink function cannot work because the IP camera is behind a Gelee Double NAT network Apply Cancel Click Apply to apply settings or Cancel to cancel changes ki NOTE The EasyLink function will not work if the following conditions occur 1 The camera cannot be located behind a double NAT network 2 The camera s IP address cannot be assigned to specific port numbers using the router s port forwarding 3 EasyLink uses UPnP to exchange port information with the router The camera must connect to the internet through a router which supports UPnP 57 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Wireless These settings control how a Network Camera interacts with a wireless network Users can identif
51. il gt is selected the following page will be shown Event Schedule Always Schedule 0 Recurrence Pattern Motion Detection 7 Window1 D Window2 Window 3 O Save Streamto FIP El Send Snapshotto FIP MV Play Audio Clip There is no available audio clip Configure one here C Send HTTP Notification W Send to Email E LED Light E Send UDP Notification to IP address Part E Send Multicast Notification to IP address Fort Sender TO CC Senders Name Subject i Sender Enter the email address of the sender li Recipient Enter the email address of the recipient To enter multiple recipients separate each using a comma lil Senders Name Enter the senders name that will appear in the recipient s inbox iv Subject Enter the title of the email 5 When complete click Apply to save new event or Cancel to delete the event The new event will appear on the event list 6 To edit an event setting select the event from the list To remove an event setting from the list select an event name from the list and then click lt Delete Event gt Click lt Add Event gt to add more events Anote Refer to the Audio Clip section for more details about the Play Audio Clip action 70 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Motion Detection Motion can be detected by measuring changes in the speed or vector of an object or objects in the monitored area T
52. in name Refer to the DynDNS website www dyndns com to apply for a dynamic domain account When an account has been created enter the username password and hostname Click Apply to apply settings or Cancel to cancel changes rees Apply Cancel TZO is a DDNS provider which allows users to create a dynamic DNS Refer to the TZO website http www tzo com to apply for a dynamic domain account When an account has been created enter the e mail address password and domain name Click Apply to apply settings or Cancel to cancel changes 55 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom No IP DynDNS TZO NOP Apply Cancel No IP is a DDNS provider which offers DNS services email network monitoring and SSL certificates Email services include POP3 email outbound SMTP email backup mail services and mail reflection and filtering Refer to the No IP website www no ip com to apply for a dynamic domain account When an account has been created enter the e mail address password and domain name Click Apply to apply settings or Cancel to cancel changes EasyLink EasyLink is a unique Brickcom function which allows users to assign a unique EasyLink name to their network camera s IP address There is no need to configure the router to open up ports or remember hard to memorize IP addresses When this function is enabled users can log onto uniqueEasyLinkname mybrickcom com to v
53. ion Camera Video Audio Video to configure the codec compression and video resolution or refer to the Video configuration page HTTP TCP UDP protocol HTTP This unicast method can be used to traverse firewalls Firewalls are commonly configured to allow the HTTP protocol thus allowing RTP to be tunneled 30 EXPERT IN WIRELESS IP SURVEILLANCE Brickcom TCP This protocol guarantees the complete delivery of streaming data and provides better video quality The downside of using this protocol is that the quality of its real time effect is less than that of the UDP protocol UDP This protocol allows for more real time audio and video streams However network packets may be lost due to network burst traffic and images may be broken Activate UDP connection time sensitive responses are more important than video quality LED Control Use the drop down menu to adjust the brightness of the camera s LED AE Recording on off Displays the status of recording video ne MIC on off Displays the status of the MIC volume Gay pr Speaker on off Displays the status of the Speaker SS MD on off Displays the status of Motion Detection Brightness Drag the slider bar to adjust the image brightness level Mic volume Drag the slider bar to adjust the microphone volume Speaker volume The built in speaker will play sound from an audio clip from the computer microphone when it is enabled For more Audio settin
54. isk 77 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom LED Light Keep active during event Keep active for 1 Sec 1 10 Activate On LED Control Inactivate Off Mode Select Keep active during event or Keep active for a specific amount of time when an event is triggered LED Control The LED on the front of the camera can be set to flash at a configurable interval when an event is triggered From the Activate drop down menu select a percentage which the LED will brighten to When the LED reaches the selected percentage it can be configure to fade to off or turn off Select the option from the Inactive menu Click Apply to apply settings or Cancel to cancel changes 78 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom System System Log Log Set up the camera to record a system log when an event is triggered System Log Remote Logging LOG WARNING Vireless Wireless connection for SSID Brickcom is down Thu Jan 1 00 00 12 2009 LOG NOTICE WebServer User admin logged in to web server Thu Jan 1 00 02 35 2009 LOG NOTICE WebServer User admin logged in to web sewer Thu Jan 1 00 02 52 2009 LOG INFO stream Channel 1 started streaming to host 164 254 209 1987 Thu Jan 1 00 02 55 2009 LOG_INFO stream Channel 1 stopped streaming to host 169 254 2709 1987 Thu Jan 1 00 09 07 2009 LOG INFO stream Channel 1 started streaming to host 169 254 209 1
55. les for program internal functions Select Primary FTP Server from the Server Selection drop down menu to send media files to a FTP server when an event is triggered Enter the FTP IP address or hostname By default the FTP port server is set to 21 Enter the account name password and FTP Path to configure the settings FIP Settings Primary FTP Server sl PAddess zb o o 0 mme OO Ce SSS SS H FTP Path RO Click Apply to apply settings or Cancel to cancel changes 73 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom E mail Settings Select Primary Email Server option from the Server Selection drop down menu to send media files to an email server when an event is triggered SMTP Server Enter the server host name of the email server SMTP Port Enter the port number of the email server by default the SMTP port is set to 25 Authentication Select the authentication type from the drop down menu Email Account Enter the user name of the email account if necessary Email Password Enter the password of the email account if necessary Email Settings Server Selection Primary Email SET er em Click Apply to apply settings or Cancel to cancel changes Samba Settings Select this option to send the media files via a network neighborhood when an event is triggered Server Address Enter the IP address of the Samba server User Name Enter the user name of the Samba server
56. n The read only date and time of the PC will be displayed NTP Network Time Protocol NTP is a protocol for synchronizing the clocks of a computer system Select to update the time with a NTP server on an hourly daily weekly or monthly basis Time Zone Select the local time zone from drop down menu NTP Server 1 and Server 2 Enter the address of the NTP server Daylight Saving Enable this option to automatically update for Daylight Savings Time Date and Time year 2009 Month 1 Day 1 Hour jo Minute a Second jg Mo y Hi Minute Second Clone from PC Clone Timezone GMT 8 HONG KONG rr BS stdtime gou tv W iclock stdtime gay tu Click Apply to apply settings or Cancel to cancel changes 80 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Device Information System Information Displays the complete system information of the camera System Information Network Settings Video Audio Settings Client Information 00 26 82 B6 3C 7B v3 1 0 2 Brickcom Corporation mengen Network Settings Displays the complete network settings information of the camera System Information Network Settings Video Audio Settings Client Information IP Information address 79216812 D Subnetmask 255 285250 Default Gateway 192 165 12 D EE SecondayONS 102 16012 O O O OSOS OO Network Services EE EE E EE E EE Video Audio Settings Displays t
57. ng the best video resolution Color Effect Select to display color or black and white video streams White Balance White balance is a camera setting that adjusts for lighting in order to make white Profile Management Profiles can be scheduled to change at scheduled times or under different lightening changes Camera Profile Management Always O Schedule Always use Day Apply Cancel Always Select Always to use a single profile Select the profile from the drop down menu Camera Profile Management Always Day amp Night Schedule Digital Input Day Profile Day Night Profile Night Switch to Day profile if the detected value is higherthan 40 for 5 Second Switch to Night profile ifthe detected value is lowerthan 10 for 5 Second sa Et Je m r Current value detected 155 Apply Cancel Day amp Night Only available with models with a light sensor Select Day amp Night to schedule two profiles for day and night Select profiles from the drop down menu for the Day and Night Profiles 34 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Profile Management Always Schedule 0 00 6 00 12 00 15 00 2400 Apply Cancel Schedule Select Schedule to schedule specific time periods for different profiles Camera Profile Management Always Day amp Night Schedule Digital Input High profile Day this profile will tigg
58. nges Privacy Mask Control The Cube camera is equipped with a privacy feature which allows users to mask the camera s live view Ablack screen will be displayed in place of the live view window This application is particularly useful when the camera is being used for home surveillance With the privacy button the user can have privacy while they are going about their daily life Privacy Mask Control Privacy Mask Control Enable the Privacy Mask control to remotely mask the camera s live view Hardware Privacy Mask Button Click to enable the privacy mask button on the camera If this feature is not enabled the user will not be able to use the privacy mask button Click Apply to apply settings or Cancel to cancel changes 41 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Enabling De Warp Function For Camera From the camera search list select the camera you wish to add Enter the username and password for the camera the default username is admin and the default password is admin then click Add T a gar Brickcom Double click the mouse on a network camera to add it to the BRECS4 FB 3004p 44r FB 100Ap 7ba5 PZ 040D 3cd9 IPCam TEST AA Fee Lab Cam2 FB 1004p db03 FB 1304p p365 OB 1 0046 4664 E S o S S g S g S S Username asswor d MD S004p 360 02 TEST 21100 6 192 166 10 126 192 168 10 65 192 168 10 123 192 168 10 39 192 165 10 24 192 168 10 44 19
59. o cancel changes Audio The administrator can set up two separate streams for the camera for different viewing devices The administrator can enable or disable the audio function on either stream If audio enable is selected select the Audio codec from the drop down menu 39 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Stream Advanced Settings Stream Advanced Settings Camera Speaker If the speaker is enabled select the volume from the drop down menu Echo Cancellation Enabled Enable to avoid an echo Click Apply to apply settings or Cancel to cancel changes Multicast Multicast Multicast sends a video stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address Therefore multicast can effectively save Internet bandwidth The RTSP Real Time Streaming AQ WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE hl Brickcom Protocol controls the delivery of streaming media Click Enable to enable Multicast stream 1 or Multicast stream 2 The default value for multicast address and port are 234 1 2 3 and 10000 Use different port number for different streams It is recommended to use the default values A NOTE Using the IP address of the Network Camera enables access to the video Example rtsp 192 168 1 1 channel1 Click Apply to apply settings or Cancel to cancel cha
60. omplies with Part 15 of FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may Cause undesired operations WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for
61. rivacy LED USB Port for 3G 4G Power Connector Ethernet RJ45 Socket Reset Button ER DIDO Terminal UO Connector Micro SD SDHC slot 60 00 2 36 IN o IN SESE 5818 229 UTE 93 10 3 67 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom 1 A NOTE The WPS and Privacy buttons must first be enabled through the web GUI in order to work See page 37 for details on how to enable the Privacy button and see page 50 for details on how to enable the WPS Button 2 These are optional features Please refer to the Product List for the full list of optional features available for the product WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom LED Behavior Function LED Behavior Description Remark Continuous Illumination Normal Operation Top Blue Powered off Top Blue 1 Connected to switch by Ethernet or WiFi 1 Powered off Second Blue 2 No connection 1 Data Transmission via _ Second Blue WiFi or Ethernet Continuous Illumination Connected to Internet Third Blue 1 Powered off Third Blue 2 No connection WCB 100A C B 500A WPS in progress SERIES Fourth Blue Continuous Illumination Second Blue Continuous Illumination WCB 100A C B 500A SERIES Fourth Blue Firmware Under FW upgrade WCB 100A C Upgrade Process B 500A SERIES Fourth Blue Firmware Continuous Illumination Firmware succe
62. s 45 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom Immervision A0 V If you have a CS mount ImmerVision Panomorph lens and want to use it with the camera ex CB 502Ap please select Immervision A0 V g C ett tk ep Camera Sequence M Storage e Video Wall M NYS Settings A System Joystick Cameras Connect to Camera d me MD 500Ap 360 0230 7 Auto Site Name Camera Na 1 FB 130Np fb2a FB 130Np 1 z 2 OB 100Ap b030 OB 100Ap P Domain Name Easy Link Generic RTSP Click h 3 PZ 040D 30d9 PZ 0400 3 192 wen 10 6 ICK Nere tO preview P Address e Ss 4 FB 3004p 447a FB 3004p S GMD 100Ap 3933 GMD 1004 80 6 WFB 300Ap 435f WFB 3004 Http Port 7 MOD 500Ap 360 0230 MD 500Ap e Username admin Password hiiji VO Settings Model Brickcom P Camera S an OSD Settings Record Stream Type Liveview Stream Type J Site Name Stream Type Stream 1 Date Time Camera Name MD 500Ap 360 023C cc Video Codec H 264 Panorama Se P Video Resolution 2032x1536 d J Enable Audio Codec 6 711 Lens Type Immervision AU A In the preview window you can see an oval image with the black background If you do not get the oval image the de warp function will not work properly Click OK to save and apply the panorama settings A6 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom gt 01 FB 130Np fb2a Ee FB 130Np fb2a gt 02 OB 100Ap b030 0B 100Ap b030 econne
63. s update for validation Therefore plug in will not have its root certificate If IE discovers that there is no root certificate after the user s PC connects to the camera it will automatically redirect to VeriSign Web site to download and install the latest root certificate to make the installation successfully If the user s computer is able to connect to camera but unable to access the internet then the installation will fail because the computer will not be able to download the latest root certificate This problem can be resolved if computer can be connect to the internet and the camera at the same time and will not recur when Windows update patches become available 29 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Live View Stream 1 Channels HTTP protocol OFF PED Control Camera Name WCB 100Ap 2c11 2009 01 01 00 03 56 H 264 1280x800 Playing Camera Control Panel o a si z T Dr Lana Brightness Ems Mic Volume re Speaker Volume LA t fit r A e cities titi ete e e e e NOTE These are optional features Please refer to the Product List for the full list of optional features available for the product Live View is the default page that opens when accessing the camera Live video is displayed directly in the browser window Stream1 Stream2 Channels The network camera offers simultaneous dual stream for optimized quality and bandwidth Go to Configurat
64. se this feature the wireless client devices on the network must support Wireless WMM The default setting is Enabled To disable this feature select Disable Click Apply to apply settings or Cancel to cancel changes D WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Wi Fi Protected Setup Basic Settings Advanced Settings Wi Fi Protected Setup Wi Fi Protected Setup Enter PIN number 38989827 in the AP device Enter the AP s SSID Brickcom Click the Register button on the right to start WPS EEN Not Co nfigured Status Hardware WPS Button Use this method if the client device has a Wi Fi Protected Setup PIN number 1 Enter the network name from the device in the field 2 Click lt Register gt to start WPS 3 Click Enable to enable the WPS Button If this feature is not enabled the user will not be able to use the WPS button Click Apply to apply settings or Cancel to cancel changes HTTP HTTPS HTTP HyperText Transfer Protocol This protocol allows for TCP protocol quality without having to open specific ports for streaming Users inside a firewall can utilize this protocol to allow streaming data through HTTPS Hypertext Transfer Protocol over SSL This protocol allows authentication and encrypted communication over SSL Secure Socket Layer It helps protect streaming data transmission over the Internet on a higher security level than HTTP Click Enable to enable and
65. ssfully CB 100A CB 5 Upgrade upgraded 00A SERIES WPS success Fourth Blue Continuous Illumination Privacy mask active Bottom Red WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Hardware Reset Reset Button CB 100A Series CB 500A Series The Reset Button can be used to reboot the camera or restore it to factory default settings If the camera experiences a problem rebooting the camera may correct the problem If the problem remains please restore the camera to factory default settings and reinstall the software To Reboot Press and hold the Reset Button for one second using a paper clip or thin object Wait for the camera to reboot To Restore Press and hold the Reset Button for ten seconds until the LED light turns off When successful restored the LED will be blue during normal operation NOTE By restoring the camera all settings will be restored to the factory default settings Micro SD SDHC Card Capacity The network camera is compatible with Micro SD SDHC Maximum 32GB cards WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Installation System Requirements Operating System Microsoft Windows XP Home Edition SP2 Microsoft Windows XP Professional SP2 Computer IBM PC AT Compatible CPU Pentium 3GHz or faster Memory 1024 MB or more Monitor 1024 x 768 pixels or more 24 bit True color or better Network Interface 10 100Mbps Network interface card must
66. stamp To display the date and time on the screen during live view check Enable to enable the timestamp function and select the display position from the drop down menu Text To make a note about the camera check Enable and select the display position from the drop down menu Enter a video description in the text box Click Apply to apply settings or Cancel to cancel changes ki NOTE The video overlay will only takes effect in stream 1 37 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom RTSP Server Stream Video Overlay Save File Folder Advanced Settings RTSP Server RTPIRTCP To utilize RTSP authentication the user must first set a password for the camera RTSP Real Time Streaming Protocol controls the delivery of streaming media By default the port number is set to 554 Authentication Depending on the network security requirements the camera provides two types of security settings for streaming via RTSP protocol NONE and DIGEST lf DIGEST authentication is selected user credentials are encrypted using MD5 algorithm thus providing better protection against unauthorized access RTP RTCP RTCP without SR RTCP without SR Sender Report is the default option Under this option audio and video received from the IP camera are played immediately and independent of each other RTCP with SR RTCP with SR option allows synchronization between video and audio on live viewing Choose t
67. t should not enter when the owner is away If the camera records the pet entering the region a recorded message can be programmed to play and the owner will be notified via email or MMS Pet Monitor 3G Phone NB PC with e 9 web Browser 3G Network internet 777 r A AW N Ke A A AP Router 3 A WCB 100A a SE 1807 i Small Office e Surveillance Pet Monitor ki CB 100A Elderly and Residence Child Care monitor ae WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Device Appearance Description CB 100A Series CB 500A Series lt Front amp Rear view gt 1 Adjustable focal Lens wPS button Built in Microphone B Privacy button PIR Power LED ng ER illumination LED status LED Si ALALLA speaker Internet LED c e e e mp CA Power Connector wps LED ro Ethernet RJ45 Socket Privacy LED Reset Button USB Port for 3G 4G ER DIDO Terminal UO Connector Micro SD SDHC slot I B me 29 20 115 R N D Le 95 12 3 74 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Device Appearance Description e CB 500Ap 360p L lt Front amp Rear view gt Q Adjustable focal Lens Vd Built in Microphone pri Illumination LED 8 Speaker D Privacy button Power LED status LED p Internet LED Fw Upgrade Led P
68. ule endlessly Click m to stop the rule 50 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom 3 When a patrol rule is selected in the Edit Patrol section the user can see which pre set points are included and put in order for the patrol rule The user can select the desired pre set point s on the drop down list in the Edit Patrol section then click to add a pre set point to the patrol rule or click to delete a pre set point from the patrol rule The user can double click the Duration field of each pre set point to set the period of stay for the pre set point 51 WWW BRICKCOM COM EXPERT IN WIRELESS IP SURVEILLANCE Brickcom Network IP Settings This section explains how to configure a wired network connection for the camera There are several ways to setup the camera over the Internet 1 obtain an available dynamic IP address assigned by a DHCP server 2 use a static IP or use PPPoE Point to point over Ethernet Select the desire setup mode from the IP settings drop down menu 1 DHCP JI this option is selected the camera will automatically obtain an available dynamic IP address from the DHCP server each time it connects to the LAN ees e zem sans 2 Static IP Select this option to manually assign a static IP address to the camera Enter the static IP address Subnet mask Default Gateway Primary and Secondary DNS provided by the ISP 52 WWW BRICKCOM
69. word of 8 63 characters A NOTE If using WPA or WPA2 each device in the wireless network must use the same WPA or WPA2 method and shared key or else the network will not function properly 62 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom Advanced Settings Advanced Settings Wi Fi Protected Setup Auto 20 40MHz Channel Network Mode From the drop down menu select the wireless standards running on the network elf there are Wireless B Wireless G and Wireless N 2 4GHz devices on the network use the default setting BGN Mixed elf there are Wireless B and Wireless G devices on the network select BG Mixed elf there are only Wireless B devices on the network select Wireless B Only elf there are only Wireless G devices on the network select Wireless G Only elf there are only Wireless N 2 4GHz devices on the network select Wireless N Only e If there are Wireless A and Wireless N devices on the network select AN Mixed e II there are Wireless A Wireless B Wireless G and Wireless N 2 4GHz devices on the network use the default setting ABGN Mixed e UI there are only Wireless A devices on the network select Wireless A Only Radio Band The settings are available for the Auto 20 40MHZ channel and Standard 20 MHz channel Enable WMM 802 1e QoS WMM is a wireless Quality of Service feature that improves quality for audio video and voice applications by prioritizing wireless traffic To u
70. y the wireless network and enable wireless encryption A NOTE This function is only available for WCB models Basic Settings Basic Settings Advanced Settings Wi Fi Protected Setup Network Name SS Brickcom WPA Personal PP GE WPA2 Personal Click the Site Survey Button to update the list Network Name SSID The Service Set Identifier SSID is the network name used to identify the wireless signal emitted from a wireless camera It is case sensitive and can be up to 32 characters long Wireless devices have a default SSID set by the factory Brickcom wireless products use Brickcom as the default name It is recommended for users to rename their SSID to something unique in order to distinguish their wireless device from surrounding wireless networks A NOTE Be careful when including personal information when naming the SSID as it is viewable by anyone browsing for wireless networks 58 WWW BRICKCOM COM EAPERT IN WIRELESS IP SURVEILLANCE Brickcom Security Encryption protects data transmitted over a wireless network Wi Fi Protected Access WPA Personal WPA2 personal and Wired Equivalent Privacy WEP offer different levels of security for wireless communication A network encrypted with WPA Personal WPA2 personal is more secure than a network encrypted with WEP because WPA Personal WPA2 personal uses dynamic key encryption To protect the information as it passes through the airwaves it is recommend

Download Pdf Manuals

image

Related Search

Related Contents

listino.prezzi.maggio.2013 may.2013.pricelist  MS Excel Beginning  Bosch Video Management System  tiptel  Untitled  USA 540MVP Parts Catalog  HP 15.6 in Value Backpack  DIH 1.2 NSP Security User Guide  

Copyright © All rights reserved.
Failed to retrieve file