Samsung SCD-3080
Contents
1. SALES NETWORK SAMSUNG TECHWIN CO LTD Samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gyeonggi do Korea 463 400 TEL 82 70 7147 8740 60 FAX 82 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 1480 Charles Willard St Carson CA 90746 UNITED STATES Samsung House 1000 Hillswood Drive Hillswood Business Park Tol Free 1 877 213 1222 FAX 1 310 632 2195 Chertsey Surrey UNITED KINGDOM KT16 OPS www samsungcctvusa com TEL 44 1932 45 5300 44 1932 45 5325 www samsungtechwin com www samsungsecurity com P No Z6806 1174 03A2. Ultra High Resolution By adopting a double speed 410 000 pixel Sony CCD the camera produces clear picture quality with a horizontal resolution of 600 TV lines for color and 700 TV lines for B W Excellent Sensitivity The built in high sensitivity COLOR CCD produces a clear image Color 0 3 Lux 50IRE F1 2 0 0006LUX SENS UP x512 B W 0 01 Lux 50IRE F1 2 0 00002 LUX SENS UP x512 Intelligence Without assistance from an external sensor this camera independently detects and traces objects while examining stillness and movement to activate the alarm SSNR3 Samsung Super Noise Red ction Function The high performance SV V DSP chip effectively removes low light gain noise and afterimage to provide clear images even in dark environments Day amp Night ICR This camera has a function that automatically selects the mode that is appropriate for daytime or night time conditions The COLOR mode operates in daytime conditions to provide optimum colors and B W mode operates in night time conditions to enhance the definition of the image Q Features SSDR Samsung Super Dynamic Range For images with high contrast between bright and dark areas from difficult lighting conditions such as backlighting this camera selectively illuminates darker areas while retaining the same light level for brighter areas to even out the overall brightness PROFILE You can set a mode according to the came
3. The SCD 3080 is designed so that it delivers a distinctive subject and background at the same time even when the subject is in backlight by adopting a function of the proprietary SV V DSP chip 1 When the SETUP menu screen is displayed select BACKLIGHT by using the Function Setup switch so that the arrow indicates BACKLIGHT b 4 BACKLIGHT 2 Select a desired mode using the Function Setup switch depending on the camera purpose C OFF Not being used BLC Enables a user to select a desired area on a picture and view that area more clearly LEVEL Adjusts the brightness level of a monitoring area TOP BOTTOM LEFT RIGHT Adjust the area to be enhanced Operating Your Camera HLC High Light Compensation If the scene contains extremely bright light areas such as from car headlight the light can mask out much of the on screen detail LEVEL Adjusts the brightness level of a monitoring area LIMIT Enable to change the operating condition MASK COLOR TONE Change the color brightness of the masking area Black Red Blue Cyan Magenta TOP BOTTOM LEFT RIGHT Adjust the area to be enhanced SSDR Samsung Super Dynamic Range SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas Use the Function Setup switch to change the SSDR level i
4. Line Lock VPS Virtual Progressive OFF ON Scan INTELLIGENCE DETECTION TRACKING FIXED MOVED ALARM OUT ETC PIP REVERSE Privacy Masking OFF ON 12 Programmable zones Polygonal type Digital Image Stabilization DIS Coaxial Communication Pelco Coaxitron Operating Temperature 3 Humidity 10 C 50 C Less than 90 RH Dimension 0115 8 92 7mm Weight 3659 X The specification for this product may change without prior notice for product improvement DECLARATION OF CONFORMITY Application of Council Directive s 2004 108 EC Manufacturer s Name SAMSUNG TECHWIN CO LTD Manufacturer s Address SAMSUNG TECHWIN CO LTD 42 SUNGJU DONG CHANGWON CITY KYUNGNAM KOREA 641 716 European Representative Name European Representative Address Equipment Type Environment CCTV Camera Model Name SCD 3080P Beginning Serial NO C5CX6V3Z300001X Conformance to EN 55022 2006 EN 50130 4 2003 We the undersigned hereby declare that the equipment specified above conforms to the above Directive s Manufacturer SAMSUNG TECHWIN CO LTD Legal Representative in Europe Signature FD Gu Signature Full Name BONJENG GU Full Name Position QUALITY CONTROL MANAGER Position Place CHANGWON KOREA Place
5. Specification 300m 3C2V RG 59 450m 5C2VRG 6 U 600m 7C2VRG 11 U Notes e It is recommended that pure copper coax cable is used and not copper coated steel as this will cause issues with the communication over the coaxial cable LENS DC BERT BRIGHTNESS SHUTTER AGC SENS UP RETURN WETE BAL ATW OUTDOOR INDOOR MANUAL AWC SET eorr USER BLC HLC BACKLI SSDR e WDR SSNR3 ON 0FF DAY NIGHT AUTO EXTERN COLOR B W PROFILE BASIC DAY NIGHT BACKLIGHT els INDOOR e USER e IMAGE ADJ CAM TITLE e SYNC SPECIAL INTELLIGENCE PRIVACY DIS LANGUAGE RETURN SAVE NOT SAVE RESET Use the Function Setup switch within the camera Function Setup switch 1 Press the Function Setup switch Main SETUP menu is displayed on the monitor screen Select the function using 1 LEHS Change the status using the Function Setup switch the Function Setup switch 2 Select a desired function using the Function Setup switch e Place the cursor over a desired item 3 Set up a selected item by using the Function Setup switch 4 To finish the setting select EXIT and press the Function Setup switch e An item with the icon also has sub menus To select a sub menu select an item with the icon and press the Function Setup switch An item with the icon is un
6. adaptor specification for SCD 3080N SCD 3080P is DC 12V 500mA or AC HN a AG Power Input EO cou Terminal Since the power specification supports both AC pe gt and DC connect AC 24V 500mA Adaptor or DC 12V 500mA Adaptor As shown in the table above voltage decreases as the wire gets longer Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera Standard voltage for camera operation DC 12V 10 AC 24V 10 There may be some deviation in voltage drop depending on the type of wire and the manufacturer Ground should be connected to the GND terminal Be sure to connect power only after all the installation is complete Note that AC DC adaptor is not supplied with camera Coaxial Communications System 050 KEY OSD Control method SET UP UP KEY JOYSTICK UP DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT RIGHT RIGHT KEY JOYSTICK RIGHT Video Cable BNC e RS 485 The camera s video output port is connected to the monitor with a BNC coaxial cable shown below If the distance between the camera and the monitor exceeds the recommended maximum please use an auxiliary video amp Distance Recommended Cable
7. is DC 12V the SYNC menu is fixed to the INT mode e f the VPS is set to ON synchronization is fixed to INT INTELLIGENCE Commands the camera to motion detect and trace an object bi MOTION Operating Your Camera MOTION Select motion types to detect OFF Not being used DETECTION Since the camera detects motion without any additional external sensor you can monitor activity more efficient TRACKING Commands the camera to detect and trace a moving object TRACKING gt FENCE You can select up to 4 FENCE 2w or MODE Determines whether to use the fence cn selected in the FENCE 5 FILL org 6 POSITION TYPE Two types line and area of fences are 7 RETURN available COUNT Displays the number of times that an object enters or leaves a fenced area gt FILL Fill or remove color from the FENCE POSITION Defines the position and detection direction of a line or fenced area 1 LINE FENCE SEL POS Selects a position from POS1 POS2 Y POS Adjust the size and position of the selected line fence DIRECTION DIRT Detects objects moving left to right on the fence line DIR2 Detects objects moving right to left on the fence line DIR1 2 Detects all objects moving crosswise on the fence line RETURN Select this to save the POSITION menu settings and return to the TRACKING menu 2 AREA FENCE SEL POS Selects a position from POS1 P
8. on the screen e PIP Picture in Picture Displays a full size image along with the thumbnail to provide more detailed information The position of the thumbnail is adjustable D 700M You can use a digital zoom of x1 x16 FONT COLOR You can change the OSD font color White Yellow Green Red Blue SHARPNESS As you increase this value the picture outline becomes stronger and clearer Adjust this value appropriately depending on the sharpness of the picture RETURN Select this to save the settings for the IMAGE ADJ menu and to return to the SA SPECIAL menu Operating Your Camera Notes When the V REV or H REV mode is enabled the text on the screen does not flip If you increase the SHARPNESS level too high the picture may become distorted or noise may appear CAM TITLE If you enter a title the title will appear on the monitor 1 If the SPECIAL menu screen is displayed use the Function Setup switch so that the arrow indicates CAM TITLE 2 Set it to ON by using the Function Setup RIS SS EIER ABCDEFGHIJKLM switch NOFORSTUUUKYZ 3 Press the Function Setup switch abcdefghijklm N st z 4 Use the Function Setup switch to move to x les Age E E 3 a desired letter and select the letter by pressing the Function Setup switch Repeat this to enter multiple letters You can enter up to 15 letters 5 Enter a title move the cursor to POS and p
9. the main body refer to the Figure 2 on page 12 1 You can adjust the camera to any direction by using Pan Tilt Rotate mechanism Pan Base moves by 176 to each side direction and 352 on the whole e Tilt Base covers total 73 angle 0 73 e Rotate Base moves by 174 to each side direction and 348 on the whole 2 Methods of adjustment Mounting on a wall After mounting the camera on a wall adjusting the panning angle so that the camera can face the direction to monitor when tilted Adjust the tilting angle by rotating the tilt base Loosen the rotate base hold screw and adjust rotate base for the best view Tighten the rotate base hold screw Mounting on a ceiling After mounting the camera on a ceiling adjusting the panning angle to the correct viewing position by rotating the pan base Adjust the titing angle by rotating the ti base Loosen the rotate base hold screw and adjust rotate base for the best view Tighten the rotate base hold screw Connect the Video Output jack to the VIDEO IN jack of monitor Monitor As the connecting method varies with the instruments refer to the manual supplied with the instrument f necessary you can connect the monitor to the REMOTE jack on the back of your camera Only connect the cable when the power is turned off Connect the adaptor to the power input terminal as shown in the figure below b
10. the size and position of the selected area RETURN Select this to save the MASK AREA menu settings and return to the INTELLIGENCE menu SENSITIVITY Set the sensitivity of the motion detection When adjusting the sensitivity note that the lower the level means the higher sensitivity DETECT SIZE Selects an object size to detect on the screen When adjusting the detection size note that the higher the level means the bigger detection size RETURN Select this to save the INTELLIGENCE menu settings and return to the SPECIAL menu PRIVACY Mask an area you want to hide on the screen gt 1 ARER AREAL 1 When the SPECIAL menu screen is displayed press the Function Setup switch so that the arrow indicates PRIVACY 2 Set up the mode using the Function Setup switch AREA You can select up to 12 PRIVACY areas MODE Determines whether to use the area selected in the AREA MASK COLOR Determine area color You can select Green Red Blue Black White Gray TRANSPARENCY Adds or removes transparency from the masking area SEL POS XPOS YPOS Adjust the size and position of the selected area RETURN Select this to save the PRIVACY menu settings and return to the SPECIAL menu C DIS Digital Image Stabilizer This function mitigates any picture movement due to external factors such as wind As the DIS function uses the digital zoom the camera s resolution will decreas
11. High Resolution WDR Dome Camera SCD 3080 User Guide Before installing and operating this product please read this manual thoroughly ENGLISH Before operating the camera confirm the camera model and correct input power voltage To help you understand this manual thoroughly we ll introduce our model description W SCD 3080 SERIES NTSC MODELS PAL MODELS SCD 3080N SCD 3080P I MODEL DESCRIPTION SCD 3080X SIGNAL SYSTEM SIGNAL SYSTEM N NTSC MODEL P PAL MODEL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL to constitute a risk of electric shock to persons The lightning flash with an arrowhead symbol within an equilateral triangle A is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment i
12. OLOR 600TVL B W 700 TVL Min Illumination COLOR 0 3 Lux 60IRE F1 2 0 0006 Lux SENS UP X512 B W 0 01 Lux 60lRE F1 2 0 00002Lux SENS UP X512 Video Output CVBS 1 0Vp p 750 composite Zoom Ratio 3 9x Manual Focus Length 2 8 11mm F1 2 Angular Field of View H 94 0 Wide 26 0 Tele V 67 0 Wide 20 0 Tele Pan Tilt Rotate Range Electronic Shutter Speed 352 0 73 02 348 1 60 1 120k sec 1 50 1 120k sec Shutter Mode ESC MANUAL A FLK FIXED On Screen Display NTSC 7 PAL 16 NTSC English Korean Japanese Spanish French Portuguese Taiwanese PAL English Chinese German Italian French Spanish Russian Czech Polish Romanian Serbian Swedish Danish Turkish Portuguese Thai Gain Control OFF LOW HIGH SENS UP frame Integration OFF Auto Selectable x2 x512 White Balance ATW OUTDOOR INDOOR MANUAL AWC 1 700 K 11 000 K Backlight Compensation OFF USER BLC HLC SSDR WDR Wide Dynamic Range 128 520 x160 54dB 3D Noise Filter SSNRIII OFF ON Level adjustable Day amp Night AUTO EXTERN COLOR B W Profile BASIC DAY NIGHT BACKLIGHT ITS INDOOR USER Digital Zoom OFF ON x1 x16 Sharpness OFF ON Level adjustable Camera Title OFF ON Display 15 Characters SYNC INT
13. OS4 Y POS Adjust the size and position of the selected area fence DIRECTION IN Detects objects entering the fenced area OUT Detects objects exiting the fenced area IN OUT Detects all objects entering and exiting the fenced area RETURN Select this to save the POSITION menu settings and return to the TRACKING menu RETURN Select this to save the TRACKING menu settings and return to the INTELLIGENCE menu COLOR DOME CAMERA 32 SCD 3080 LINE FENCE 1 SEL POS 2 X POS 3 Y POS 4 DIRECTION FIXED MOVED Detects an object that emerges or disappears from the screen or stays onscreen without movement Notes A detection FIXED MOVED error may occur if multiple motions occur continuously in random directions a fixed object moves in one position continuously asecond object screens the first moving object DETECT BOX Outlines an object on the screen in a box when its movement matches a custom Motion Type ALARM OUT Releases a signal from the MD Output Terminal of the camera when an objects movement matches a custom Motion Type DETECT AREA Defines the Motion Detection area MASK AREA Specify a detection exception area to mask Select a mask area number and specify the size and position AREA You can select up to 4 areas MODE Determines whether to use the area selected in the AREA TOP BOTTOM LEFT RIGHT Adjust
14. Unlocking direction Locking direction Anti clockwise Clockwise Dome cover Original position of The installation should be done by qualified service personnel or system installers If the ceiling material is not strong enough to hold the installation screws the camera may fall off Reinforce the ceiling as needed To change the position of the cable take away the Hole Cover and pass the cable through m 1 Hold the ceiling bracket located where the arrow Calling breckek points to and separate it from the main body of the An arrow for installing camera by rotating it anti clockwise directions refer to the picture in Notes on page 11 2 Place the separated ceiling bracket so that the Front side faces the area to be monitored and install it with the M4 tapping screws 3 To combine the main body with the ceiling bracket MA tapping make sure that the pan base fixation screw face the screw provided opposite side of the Front side of the ceiling bracket and rotate it clockwise 4 Adjust the camera lens to face the area to be monitored and fix the main body and the dome cover by aligning the grooves and rotating the body clockwise Locking direction Dome cover M4 tapping screw Figure 2 BS Notes e f you want to install the camera with the ceiling bracket combined fix it using two M4 tapping screws at the side of
15. available due to function settings Using this function you can control the screen brightness 1 When the SETUP menu screen is displayed select LENS by using the Function Setup switch so that the arrow indicates LENS 2 The Lens mode has sub menu site as listed below BRIGHTNESS Adjusts the video brightness FOCUS ADJ To adjust the lens focus correctly you must activate the Focus Settings mode To activate the Focus Settings mode adjust the lens focus and then deactivate the settings mode You can adjust the shutter value of ESC shutter mode gt 1 LEHS nc Notes Set the shutter mode to if color rolling occurs p 2 EXPOSURE 1 When the SETUP menu screen is displayed select EXPOSURE by using the Function Setup switch so that the arrow indicates EXPOSURE 2 Select a desired mode using the Function Setup switch BRIGHTNESS Adjusts the video brightness SHUTTER You can select the shutter Shutter speed is fixed at 1 60 sec 1 50 sec ESC Select this to control the shutter speed automatically If ESC is selected the shutter speed is automatically controlled depending on the ambient illumination of the subject MANUAL You can control shutter speed manually NTSC MODEL 1 60sec 1 120 000sec PAL MODEL 1 50sec 1 120 000sec AFLK Select this when you experience picture flicker this happen when there is a clash with th
16. e DIS doesn t operate when background illumination is too low DIS doesn t operate when object pattern is monotonic as like sky or white wall LANGUAGE You can select the menu language according to your requirements CRETURN Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu Select a desired EXIT mode using the Function Setup switch depending on the camera purpose SAVE Save the current settings and exit the MAIN SETUP menu NOT SAVE Do not save the current settings and exit the MAIN SETUP menu CRESET Resets the camera settings to the factory defaults Language and Monitor settings are not initialized If you have trouble operating your camera refer to the following table If the guidelines do not enable you to solve the problem contact an authorized technician 6 Nothing appears on the screen gt Check that the power cord and line connection between the camera and monitor are properly connected gt Check that you have properly connected BNC cable to the camera The image on the screen is dim gt Is lens stained with dirt Clean your lens with soft clean cloth Set the monitor or DVR to the proper condition gt If the camera is exposed to very strong light change the camera position The image on the screen is dark gt Adjust the contrast feature of the monitor or DVR gt If you have an intermediate device set the 750 Hi z properly The camera is not
17. e installed lighting frequency Notes e Set the shutter mode to if color rolling occurs When the SHUTTER is set to ESC after selecting the Internal Synchronization Type the picture may become unstable if the camera faces a bright fluorescent light Therefore take care when choosing the installation position When the SHUTTER is set to MANUAL or A FLK mode SENS UP will be disabled C AGC AUTO GAIN CONTROL The higher the gain level the brighter the screen but the greater the noise OFF Deactivates the AGC function LOW Allows automatic gain control from 5 3dB to 32dB HIGH Allows automatic gain control from 5 3dB to 37dB SENS UP When it is night or dark the camera automatically detects the light level and maintains a clear picture if this mode is activated OFF Deactivates the SENS UP function AUTO Activates the SENS UP function e if you set the Function Setup switch to AUTO mode You can adjust the brightness by increasing or decreasing the shutter speed x2 x512 Note that the higher the zoom level the brighter the screen but the more likely it is that an after image will appear Although Noise Spots and Whitish symptoms may occur in SENS UP operation when the zoom level is increased this is normal RETURN Select this to save the changes in the EXPOSURE menu and return to the SETUP menu Use the White Balance function to adjust the screen col
18. ese German Italian French Spanish Russian Czech Polish Romanian Serbian Swedish Danish Turkish Portuguese Thai Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment and is taking a number of steps to provide customers with more environment friendly products The Eco mark represents eco Samsung Techwin s will to create environment friendly products and ROHS compliant indicates that the product satisfies the EU RoHS Directive Warnings amp Cautions This information is provided to ensure your safety and to prevent any losses financial or otherwise Please read it carefully and use the product accordingly For product inquiries please contact the retail shop where you bought the camera The use of equipment such as an aerial ladder while providing after sales service shall be at your expense Separate the power plug during a thunder storm This product is support equipment for surveillance system Therefore we can t compensate for material loss and or personal injuries by robbery fire natural disaster or other such events Warning Attention Special Mark Messages Ignoring this information may E Ignoring this information may result in material loss and or A 3 en 2 result in material loss and or a serious personal injuries including death slight injuries Indicates Never Allowed Q Indicates No Disassembling Correct Disposal of This Pr
19. ill fail May cause a product malfunction Wipe dry any liquids Liquids may contain minerals that are corrosive to electronic components Q Exposure to a spotlight or an object emitting strong light may cause smear or blooming Ensure that the power source complies with normal specifications before supplying it to the camera O High Resolution WDR Dome Camera SCD 3080 Instruction Manual M4 Tapping Screw 3EA Installation Video Output Cable Pan Base Control panning angle of camera Rotate Base Control rotating angle of camera x3 9 Vari focal Lens Module 2 8 11mm F1 2 Video Output Terminal to Monitor 6 Function Setup switch Display the menu on the screen and move the cursor to four directions to confirm status or changing a selected item Video Output Jack Power Input Terminal MD Output Terminal Motion detection signals are output through this terminal D amp N Input Terminal You can switch to Day amp Night Mode by connecting an external signal to this terminal Ground Terminal Dome Cover Shield Case Notes Be sure to connect the Day amp Night input terminal to GND when using an external input 1 Separate the dome cover by turning anti clockwise 2 Separate the shield case by pulling from the camera body To install the dome cover on the camera body turn the latches in locking direction as shown in the figure 1
20. mode The HLC is not activated in day light or when bright light is not present at night In NIGHT ONLY mode When using the WDR function the shutter is only available with the fixed mode Since the performance of the WDR function may be affected by the area of the bright part of the screen optimize the installation angle for the best WDR performance If you increase LIMIT the screen display may be distorted If you use the VPS Virtual Progressive Scan function the CCD reads differently so you can not use WDR simultaneously If you set VPS to ON WDR will be automatically set to FIXED Mode COLOR DOME CAMERA 23 SCD 3080 This function reduces the background noise in a low luminance environment 1 When the SETUP menu screen is displayed select SSNR3 by using the Function Setup switch so that the arrow indicates SSNR3 p 5 55HRS OM 2 Select a desired mode using the Function Setup switch ON Activates SSNR3 so that noise is reduced OFF Deactivates SSNR3 Noise is not reduced 3 Set the SSNR3 mode to ON and press the Function Setup switch Then you can adjust the noise reduction level Notes You cannot set the SSNR3 to ON or OFF when the AGC mode of the EXPOSURE menu is OFF When adjusting the noise reduction level in the SSNR3 mode remember that the higher the level set the more the noise level will be reduced as will the bright
21. n Setup switch so that the arrow indicates SPECIAL 2 Select a desired mode using the Function Setup switch bi IMAGE ADI IMAGE ADJ 1 When the SPECIAL menu screen is displayed select IMAGE ADJ by using the Function Setup switch so that the arrow indicates IMAGE ADJ 2 Select a desired mode using the Function Setup switch Monitor Please change the settings value of video appropriate to your monitor LCD Please select this menu item when using an LCD monitor You can change the gamma PED level and color gain in the sub menus CRT Please select this menu item when using a CRT monitor You can change the PED level color gain in the sub menus USER Please use this menu item when using a monitor other than standard ones You can change the gamma PED level and color gain in the sub menus VPS Virtual Progressive Scan This is an advanced technology that reproduces a sharp progressive image This is appropriate to high quality recording and file transfer via the Internet OFF Selects 2 1 Interlaced Scan as the Imaging Method ON Selects Progressive Scan as the Imaging Method REVERSE You can reverse the picture OFF You don t reverse the picture H REV You can flip the picture horizontally on the screen V REV You can flip the picture vertically on the screen HV REV You can flip the picture horizontally and vertically
22. n the sub menu according to the contrast between bright and dark areas E 0000 0000 SSDR ON SSDR OFF WDR When there are both bright and dark areas at the same time this mode makes both areas distinctive OFF Select WDR to adjust the WDR LIMIT and LEVEL LIMIT Adjust the WDR Sensitivity by selecting LOW MIDDLE or HIGH COLOR DOME CAMERA 22 SCD 3080 LEVEL Adjust the WDR Brightness by controlling the bar from 1 to 10 MODE Indoor and outdoor backlight conditions are appropriately selected ANTI ROLLING Rolling caused around a fluorescent lamp is improved 3 Select a desired mode using the Function Setup switch OBLC Adjust the area to be enhanced Enable the user to change the level then adjust the level limit mask color tone and area BLC SETUP HLC SETUP gt 1 LEVEL 2 TOP 3 BOTTO 4 LEFT 5 RIGHT 6 RETURN SSDR Enable the user to change the WDR Enable the user to change the level limit and level SSDR SETUP WDR SETUP P1 LIMIT MIDDLE 2 LEVEL 5 3 MODE INDOOR 4 ANTI ROLLING OFF 5 RETURN gt LEVEL Press SET to Return 9 Dotes Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen optimize the installation angle for the best HLC performance When dark the HLC is only activated when a bright light exceeding a specific size In NIGHT ONLY
23. ness of the image You can display pictures in color or in black and white 1 When the SETUP menu screen is displayed select DAY NIGHT by using the Function Setup switch so that the arrow indicates DAY NIGHT 6 DAY HIGHT AUTO 2 Select a desired mode using the Function Setup switch according to the picture display you want CAUTO The mode is switched to Color in a normal environment but switches to B W mode when ambient illumination is low To set up the switching time for AUTO mode press the Function Setup switch You can turn on or off the burst signal on B W mode BURST MODE You can tum on or off the burst signal on B W mode DURATION You can select the day night switching point DWELL TIME You can select day night switching delay time from 3s 5s 75 10s 15s 20s 30s 40 60s Color gt B W BW gt Color Early 25 lux 5 lux Late 1 lux 7 lux The day night switching point of the camera can be adjusted EXTERN This mode allows you to apply a desired filter to external signals O COLOR The picture is always displayed in color BW The picture is always displayed in black and white You can turn on or off the burst signal B W mode When AGC in the EXPOSURE menu is OFF mode operates as selecting COLOR mode and AUTO mode cannot be selected Be sure to connect the Day amp Night input terminal to GND when
24. oduct Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal COLOR DOME CAMERA D SCD 3080 Use only under temperature conditions between 10 C and 50 C Provide good ventilation when using in high temperature conditions May lower image quality Severe lighting changes or flickering may hinder The lens is the most important component of normal camera operation the camera Be careful not to smear it with fingerprints amp 5 Y N e JIN eS Zu NG m May cause a product malfunction May damage the CCD LA a If exposed to radioactivity the CCD w
25. or 1 When the SETUP menu screen is displayed select WHITE BAL by using the Function Setup switch so that the arrow indicates WHITE BAL 2 Select a desired mode using the Function Setup switch P 3 WHITE BAL Select one of the following 5 modes as appropriate for your purpose Select this when the color temperature is between 1 700 K and 11 000 C OUTDOOR Select this when the color temperature is between 1 700 K and 11 000 K sodium light inclusion O INDOOR Selectthis when the color temperature is between 4 500 K and 8 500 K MANUAL Selectthis to fine tune White Balance manually Set White Balance first by using the ATW or AWC mode After that switch to MANUAL mode fine tune the White Balance and the Function Setup switch AWC SET To find the optimal luminance level for the current environment point the camera towards a sheet of white paper and press the Function Setup switch If the environment changes readjust it Notes White Balance may not work properly under the following conditions In this case select the OUTDOOR mode When the color temperature of the environment surrounding the subject is out of the control range e g clear sky or sunset When the ambient illumination of the subject is dim If the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically the White Balance operation may become unstable
26. ra installation conditions BASIC DAY NIGHT BACKLIGHT ITS INDOOR USER PIP Displays a full size image along with the thumbnail WDR By adopting a proprietary SV V DSP chip the camera delivers clear high quality pictures even when the scene is backlight by increasing exposure in dark areas while decreasing it in bright areas a corrected image with clear details results VPS Virtual Progressive Scan Adopting Samsung s unique development the VPS Virtual Progressive Scan enhances the sharpness of moving subject s outline The VPS enables elective output in progressive mode using the existing interlaced input and effectively enhances the sharpness of captured pictures from video and still images The function effectively removes blurred outline problems resulting in excellent road monitoring and improved license plate recognition COLOR DOME CAMERA 5 SCD 3080 pida phdg Ji a DIS Digit Image Stabilizer gt Communication Poy Pays The DIS function compensates for any camera Coaxial communication methods are supported movement to produce more stable pictures Protocol Pelco Coaxitron pode 4 Miscellaneous Functions 3 os A A A A AN az HLC High Light Compensation SENS UP REVERSE The camera s OSD is complimented by 19 languages 0 200 SHARPNESS and PRIVACY functions are NTSC English Korean Japanese Spanish provided French Portuguese Taiwanese PAL English Chin
27. ress the Function Setup switch The entered title appears on the screen Select the position to display the title on the screen by using the Function Setup switch and press the Function Setup switch When the position is determined select END and press the Function Setup Switch to return to the SPECIAL menu CER POS END 3 Notes When the CAM TITLE menu is OFF no title will be displayed on the monitor screen even if you enter one English and Numbers are available in this mode If you move the cursor to CLR and press the Function Setup switch all the letters are deleted To edit a letter change the cursor to the bottom left arrow and press the Function Setup switch Move the cursor over the letter to be edited move the cursor to the letter to be inserted and then press the Function Setup switch COLOR DOME CAMERA 30 SCD 3080 SYNC In areas where the supply is at 6OHz NTSC 50Hz PAL frequency you can synchronize the Output phase of multiple cameras using the power synchronization function Line Lock without using a synchronization signal generator INT Internal Synchronization Type L L Power Synchronization Type Line lock Press the Function Setup switch You can select a desired phase from 0 to 359 when select phase Notes When using AC power at 60Hz NTSC 50Hz PAL frequency you can use the L L type synchronization When the power
28. s operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense WARNING Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment WARNING To prevent electric shock and risk of fire hazards 4 Do NOT use power sources other than that specified 4 Do NOT expose this appliance to rain or moisture This installation should be made by a qualified service person and should conform to all local codes Features Precautions 8 Components and Accessories 9 Overview 10 Installation m E Installation eM Adjust the panning and tilting rotating while watching the monitor 13 Wi Connecting to Monitor 14 Wi Connecting to Power 14 E Using Coaxial Communications 15 Operating Your Camera 16 E Menu Configuration 16 8 Menu Setup EXPOSURE WHITE BAL BACKLIGHT SSNR3 DAY NIGHT PROFILE SPECIAL Troubleshooting m e Specifications SAM TE 4 N Dimension
29. using an external input 1 When the SETUP menu screen is displayed select PROFILE by using the Function Setup switch so that the arrow indicates PROFILE gt 7 PROFILE BASIC 2 Select a desired mode using the Function Setup switch according to the picture display you want C BASIC The most common environment is set to meet DAY NIGHT It will be set automatically so it optimizes to the day or night conditions respectively BACKLIGHT It will be set automatically so you can distinguish the object from the background in a severe backlighting scene SITS It will be set automatically so you can easily check the traffic conditions INDOOR It will be set automatically to help you take a picture in a regular indoor lighting condition USER Automatically configures the camera to your custom settings Select Custom for Simple Setup mode Configure the menu options to your custom settings The settings are automatically saved as Custom mode Profile user mode don t initialize when menu resets 3 In the PROFILE menu you can configure the following camera settings at once SHUTTER GAIN HIGH HIGH HIGH HIGH WHITE BAL ATW ATW ATW OUTDOOR INDOOR BACKLIGHT OFF OFF USER BLC OFF OFF SSNR3 ON ON ON ON ON DAY NIGHT AUTO AUTO AUTO AUTO AUTO x 1 When the SETUP menu screen is displayed select SPECIAL by using the Functio
30. working properly and the surface of the camera is hot gt Check that you have properly connected the camera to an appropriate power source The DAY NIGHT menu does not work gt Check that AGC of EXPOSURE SETUP menu is OFF The SENS UP function does not work gt Check that AGC of EXPOSURE SETUP menu is OFF gt Check that SHUTTER of EXPOSURE SETUP menu is A FLK or MANUAL The INTELLIGENCE function does not work gt Check that INTELLIGENCE of menu is OFF Color is not correct gt Check the setting of WHITE BAL SETUP menu The screen flickers continually gt Ensure the camera is not pointing towards the sun When coaxial communication is not available Make sure that the camera and monitor are installed within the recommended distance Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded The camera is out of focus gt Check that you have properly adjusted the zoom focus adjustment lever of lens Input Voltage AC 24V 10 DC 12V 10 Power Consumption Imaging Device Max 3 5W 1 3 inch Color Double Density CCD Total Pixels 811 H x 508 V 768 H 494V 795 596 V 752 H x 582 V Effective Pixels Scanning System 2 1 Interlace Progressive Synchronization Internal Line Lock 15 734KHz H 15 625KHz Frequency V 59 94Hz V 50 00Hz Horizontal Resolution C
Download Pdf Manuals
Related Search