ACTi KCM-3911 surveillance camera
Contents
1. KCM 3911 H 264 4 Megapixel IP D N Hemispheric Camera DC 12V PoE Ver 2011 12 19 VV lt gt ACTI Connecting Vision ACTI Connecting Vision vA KCM 3911 Hardware User s Manual Table of Contents 0 Precautions 3 1 Introduction 4 PACKAGES CONTEN ES aaasta aria Ard E A 4 Features and Benefits osnnnnnsnnannsnnannnnnannanannnannanas 5 Safety Instructions esnnrnnnnnnnnnnnnnnannnnnnnnnnnnnnnnnannnnnnnnnnna nn 6 Physical description AMPS a 8 Product SpedficaHoN oa cation een v i aitia dein ai ia 11 2 Accessing Camera 13 If you have DHCP server router in your network 13 If you do NOT have DHCP server router in your network 13 2 www acti com ACTI Connecting Vision vA KCM 3911 Hardware User s Manual 0 Precautions Read these instructions You should read all the safety and operating instructions before using this product Heed all warnings You must adhere to all the warnings on the product and in the instruction manual Failure to follow the safety instruction given may directly endanger people cause damage to the system or to other eguipment Servicing Do not attempt to service this video device yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Trademarks All names used in this manual ar2. When the power supply cord or plug is damaged NO If liquid has been spilled or objects have fallen into the video product CD Ifthe video product has been directly exposed to rain or water K If the video product does not operate normally by following the operating Instructions in 6 www acti com ACTI Connecting Vision vA KCM 3911 Hardware User s Manual this manual Adjust only those controls that are covered by the instruction manual as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation Safety Check Upon completion of any service or repairs to this video product ask the service technician to perform safety checks to determine if the video product Is in proper operating condition 7 www acti com ACTI Connecting Vision vA KCM 3911 Hardware User s Manual Physical description a Reset Button Ethernet Port Micro SD Micro SDHC Card Slot QO Digital Input Output Power LED DC 12v Power Input Audio Input Output 1 Reset Button Step 1 Switch off IP device by disconnecting the power cable Step 2 Press and continue to hold the Reset Button with a sharp tipped object like a pen Step 3 Reconnect the power cable while continuing to hold the reset button The red Power LED light will flash on for 3 second first turn off for abo
3. network and your IP device will acguire network address by itself Find and access the device with our IP Utility program You may download it at http www acti com product detail Software ACTi Utility Suite If you do NOT have DHCP server router in your network 1 Configure your PC to use the same subnet by changing your PC s IP address to the subnet with prefix 192 168 0 XXX The last number should be anything from 1 to 254 except 100 and other occupied IP addresses Subnet mask should be 255 555 255 0 2 The default IP used by this device is 192 168 0 100 Please make sure your PC is NOT using this address and that no two equipments use the same IP address in the network 3 Change your IP address by going to Control Panel gt Manage Network Connections gt Right click on the connection to change gt Option gt TCP IP IPv4 Properties ajx General You can get IP settings assigned automatically i your network supports thes capability Otherwase you need to ask your network administrator for Please set the settings as below the appropriate IP settings C Obtain an IP addess automatically 4 Uey he lolong Wades IP address 192 168 0 xxx IP address SA a Subnet mask 255 255 255 Default gateway 0 fa NOTE xxx should be a number from 1 to 254 except 100 which is Use the following DNS server addresses Prefered ONS server Ahemale ONS server used by the IP dev
4. Setup Web Configurator Dq AcT Host amp Date Host A Connection Type Date amp Time A NETWORK Link Speed amp Duplex Mode gt Dynamic IP Address Connection Type Static IP Address IP Address Filtering i n E IP Address 192 _ 166 _ 101 DNS DONS SubnetMask 255 1255 1255 _ 0 Port Mapping a Tos ISP Gateway A UPnPTM O PPPoE Video amp Audio E Maintain KEE Logout Password E Pv6 Apply Reset 10 Click Apply 11 Please go to Maintain gt Save amp Reboot and click Apply Internet Explorer will close after a few seconds This is normal 12 Wait for 30 seconds and open IE again to connect to the new IP In this example 192 168 0 101 For the second device or more you add into the network please type the correct IP 13 Adjust the default Video setting by going to Video amp Audio gt Video 5
5. e probably registered trademarks of respective companies Liability Every reasonable care has been taken during the writing of this manual Please inform your local office if you find any inaccuracies or omissions We cannot be held responsible for any typographical or technical errors and reserve the right to make changes to the product and manuals without prior notice FCC CE Regulation NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and If not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the users will be required to correct the interference at their own expense 3 www acti com ACTi Connecting Vision Rs KCM 3911 Hardware User s Manual 1 Introduction Package Contents KCM 3911 Power Adaptor Product CD eee ia Audio Accessories Warranty Card Drill Template scale 1 1 4 www acti com ACTI Connecting Vision vA KCM 3911 Hardware User s Manual Features and Benefits This is a cutting edge n
6. elopers Software developers can save considerable efforts by using our Streaming Library or ActiveX control 5 www acti com ACTI Connecting Vision vA KCM 3911 Hardware User s Manual Safety Instructions Don t use the power supply with other voltages This device is likely to be damaged or damage other equipments personnel if you use a power supply with different voltage than the one included with this device All warranty of this product will be voided in the situations above Don t open the housing of the product Cleaning Disconnect this video product from the power supply before cleaning Attachments Do not use attachments not recommended by the video product manufacturer as they may cause hazards Water and Moisture Do not use this video product near water for example near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like Don t use accessories not recommended by the manufacturer Only install this device and the power supply in a dry place protected from weather Servicing Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Damage Requiring service Disconnect this video product from the power supply immediately and refer servicing to qualified service personnel under the following conditions 1
7. etwork video surveillance camera It can capture compress and transmit real time video in excellent quality This camera is your best choice to build an intelligent IP surveillance system Adaptive Profile With the innovative embedded Image Signal Processor ISP this camera responds to changing lighting condition with customized algorithm This allows for clear image with very little noise at night H 264 MPEG 4 MJPEG Triple Codec Dual Streaming This device supports 3 compression formats H 264 MPEG 4 and MJPEG It brings superior image quality at 6 frames per second up to resolution of 2032 x 1920 pixels and offers up to 12 frames per second in Full HD 1080p 1920 x 1080 In 720p 1280 x 720 and VGA resolution 640 x 480 the device reaches 12 frames per second Powerful Bundled Surveillance Software To extend the capabilities of the IP Hemispheric Camera series a powerful surveillance program is included in the package for free Users can easily use an existing PC as a digital video recorder Scheduled recording and manual recording keep every important video recorded in the local hard disk Reliable and accurate motion detection with instant warning enables immediate response in every condition Quick and simple search and playback function lets you easily find the images and video you want Software Development Kit Support This IP Hemispheric Camera can be integrated or controlled by applications from third party software dev
8. hernet 10 100 Base T RJ 45 connector Security IP address filtering HTTPS encryption Password protecied user levels IEEE 802 1X network access control e Alarm Alarm Trigger Video motion detection 3 6 regions depending on video mode External device through digital inout Alarm Response Notify control center Go to ePTZ preset point or preset tour Change camera settings Command other devices E mail notification with snapshots Save video or snapshot to local storage Upload video snapshot to FTP server Activate external device through digital output 1 ACTI Connecting Vision vA KCM 3911 Hardware User s Manual Interface Digital Input 2 terminal block Digital Output 2 terminal block Local Storage MicroSD MicroSDHC memory card slot card not included e General Power Source PoE Class 3 IEEE 802 3af 9 6W DC 12V 7 68W Consumption 425 g 0 93 Ib 10 C 50 C 14 F 122 F 10 85 RH Integration Unified Solution Fully compatible with ACTi software ISV Integration Software Development Kit SDK available Microsoft Internet Explorer 6 0 or newer 2 pi ACT KCM 3911 Hardware User s Manual SA 2 Accessing Camera If you have DHCP server router in your network Many network server routers are able to automatically provide IP addresses through DHCP If you are using such a network just plug in your computer and IP Hemispheric Cam into the
9. ice Please also make sure that no two eguipments use the same IP address in the 3 ACTI Connecting Vision vA KCM 3911 Hardware User s Manual 4 Open Internet Explorer Version 6 0 or above and type in the Default IP 192 168 0 100 5 When you see the login window please input default user and password Default User Admin Password 123456 Web Configurator DA acti Account Admin Password PT rarity Language English 6 After logging in you will see the video from camera To go to the main menu click the Setup button on the top left si Pee Web Configurator DA acti Function Media Encoder Type Size RV Digital T lai NO ZOOM kilet Lata J MAJA 25 fen Sa ies ses 1a ACTI Connecting Vision vA KCM 3911 Hardware User s Manual If you are using a single camera this is enough to access the device If you are using multiple devices you need to change the current device to another unused IP address so that when the next device is connected to the network no two devices use the same IP Please perform the following steps 7 Go to Network gt Connection Type 8 Change the IP mode to Static 9 Change the IP to 192 168 0 101 or any other unused IPs Do NOT use the PC s IP address or 192 168 0 100 If this is not the first device you add to the network please also avoid other devices IPs M V live
10. n alarm input for connecting devices that can toggle between an open and closed circuit for example PIRs door window contacts glass break detectors etc The device will detect the change in digital input and transmit the signal to video surveillance servers Ground Connect with Pin 3 for DI control loop pe Pin 2 12V Provides power to external devices with a Voltage 12V DC maximum current of 100mA Max 1 2W 9 www acti com ACTI Connecting Vision vA KCM 3911 Hardware User s Manual Digital Input Connect to GND to activate or leave floating Must not be exposed or unconnected to deactivate to voltages greater than 30V DC Transistor Connect to Pin 2 through external devices for Max load lt 100mA Output DO loop If used with an external relay a diode Max voltage 24V DC must be connected in parallel with the load for to the transistor protection against transient voltages Pin 5 8 repeats Pin 1 4 for another set of DIO Connect input output devices to the camera as follows 1 Attach the cables for the device securely to the supplied green connector block 2 Once cables are connected push connector block into the terminal connector on camera 7 DC 12V Power Input Connect DC power source to the terminal block The wire with white dashed lines is the live wire which should connect to the 12V pin DESCRIPTION NAME e N L E Ground of power 0 lt ACTi KCM 3911 Ha
11. rdware User s Manual aia Product Specification KCM 3911 e Device Device Type Hemispheric Camera Progressive Scan CMOS Sensor Size 1 2 5 5 7 x4 28 mm Day Night Yes Minimum Illumination Color 1 63 lux at F2 8 30 IRE 2400 K B W 0 06 lux at F2 8 30 IRE 2400 K Color to B W switch ISP based switch configurable Mechanical IR Cut Fiter es IR Sensitivity Range 700 1 zo nm R LED Electronic Shutter 1 15 obs sec auto mode e Lens Focal Length Fixed iris e Video H 264 MPEG 4 SP MJPEG Maximum Frame Rate vs 6 fos at 2032 X 1920 12 fps at 1920 X 1080 12 fps at 1280 X 720 12 fps at 640 X 480 Resolution 180 360 Panorama ePTZ 6 VGA Motion Detection Preset Multi Streaming Simultaneous dual steams based on two configurations in single view mode Multiple streams based on single configuration in 6 cropped VGA mode Bit Rate 28 Kbps 6 Mbps per stream Bit Rate Mode Constant Variable Image Enhancement SDR Superior Dynamic Range White balance automatic hold and manual Brightness Saturation Contrast Edge enhancement Automatic gain control 2D 3D Digital noise reduction Flickerless Defogging Privacy Mask 4 configurable regions Text Overlay User defined text on video Image Orientation Image flip and mirror e Audio e Network Protocol amp Service TCP UDP HTTP HTTPS DHCP PPPoE RTP RTSP IPv6 DNS DDNS NTP ICMP ARP IGMP SMTP FTP UPnP SNMP Ethernet Port 1 Et
12. ut 15 seconds flash on for another second and turn off again By this time the reset to default operation is already completed This will take around 20 seconds from power up You may then release the reset button This length of time fluctuates slightly with the environment The Power LED light will come back on and stay on after a few more seconds The unit will start up with factory default settings automatically 8 www acti com lt ACTi KCM 3911 Hardware User s Manual Pt Restore to Default Power On Complete About 20 Seconds 2 Micro SD Micro SDHC Card Slot Insert your Micro SD card here for local recording on camera 3 Power LED This LED light will indicate current camera status 4 Audio Input Output The IP device supports audio input and output via terminal block 5 Ethernet Port The IP device connects to the Ethernet via a standard RJ45 connector Supporting NWAY this IP device can auto detect the speed of local network segment 10Base T 100Base TX Ethernet 6 Digital Input Output Used in applications like motion detection event triggering time lapse recording alarm notifications etc the I O terminal connector provides the interface to 2 transistor output For connecting external devices such as relays and LEDs Connected devices can be activated by Output buttons on the Live View page or through video management software Connect Pin 2 with 4 or 6 with 8 2 Digital Input A
Download Pdf Manuals
Related Search