Peerless ACC200 mounting kit
Contents
1. Accessory kits contain RAWL 5005 OR HILTI HL814 CONCRETE EXPANSION ANCHORS 312 x 1 625 8mm x 41mm For ceiling plate attachment to a concrete ceiling drill 5 16 8mm dia holes to a minimum depth of 1 3 4 45mm Attach using concrete expansion anchors Hammer in concrete expansion anchors then tighten to 80 in Ibs 9 N M torque using a 10mm wrench NOT FOR ATTACHMENT TO CONCRETE CEILINGS COVERED WITH PLASTER DRYWALL OR OTHER FINISHING MATERIAL For ceiling plate attachment to a wood joist finished ceiling exposed wood joists or a wood beam ceiling locate joist centers using a stud finder Drill 5 32 4mm dia holes 2 5 65mm deep into joist centers Attach ceiling plate using 14 x 2 5 6mm x 65mm wood screws CAUTION Tighten wood screws so ceiling plate is firmly attached But DO NOT TIGHTEN WITH EXCES SIVE FORCE Overtightening can cause stress dam age to wood screws greatly reducing their holding power Tighten to 80 in Ibs 9 N M maximum torque concrete block wall drill 5 16 8mm dia holes to a minimum depth of 1 3 4 45mm Attach with concrete expansion anchors If attaching to concrete block DO NOT DRILL HOLES INTO MORTAR JOINTS 5 For wall plate attachment to a solid concrete or 10f 3 4mm dia holes 2 5 65mm deep into stud center Attach wall plate using 14 x 2 5 6mm x 65mm wood screws CAUTION Tighten wood screws so wall plate is firmly attached But DO NOT T2. IGHTEN WITH EXCESSIVE FORCE Overtightening can cause stress damage to wood screws greatly reducing their holding power Tighten to 80 in Ibs 9 N M maximum torque ISSUED 6 25 96 SHEET 120 8012 4 12 15 09 ISSUED 6 25 96 SHEET 120 8012 4 12 15 09 5 16 8mm 30f3 ISSUED 6 25 96 SHEET 120 8012 4 12 15 09 2009 Peerless Industries Inc All rights reserved Peerless is a trademark of Peerless Industries Inc
3. Supplemental Instructions Wall Plate and Ceiling Plate Attachment We WN we Read entire instruction sheet ZA Installer must verify that the wall or ceiling will safely before you start installation and assembly support the combined weight of all attached equipment and hardware Peerless Industries Inc For customer service call 1980 Hawthorne Avenue 1 800 729 0307 or 708 865 8870 Melrose Park IL 60160 This product is intended for indoor use only Use of this product outdoors could lead to product failure and personal injury Note For each step see corresponding illustration IMPORTANT IT IS THE RESPONSIBILITY OF THE INSTALLER TO VERIFY THAT THE MOUNTING SURFACE WILL SAFELY SUPPORT THE COMBINED LOAD OF ALL ATTACHED HARDWARE AND COMPONENTS 14 x 2 5 6mm x 65mm wood screws for attachment to wood studs wood beams or wood ceiling joists are G D Hammer in concrete expansion anchors then tighten to 80 in Ibs 9 N M torque using a 10mm wrench NOT FORATTACHMENT TO CONCRETE WALLS COVERED WITH PLASTER DRYWALL OR OTHER FINISHING MATERIAL beam locate stud center using a stud finder Drill 5 32 provided with most Peerless products in quantities of 6 Por wall plate attachment ia wood sid Wall Or 2 3 or 4 depending on the product and application For attachment to solid concrete or concrete block order one of the concrete anchor accessory kits pictured some products may already include concrete anchors
Download Pdf Manuals
Related Search