Home

Hitachi BZ-1 data projector

Contents

1. Using the automatic adjustment feature 4 Press AUTO button on the remote control AUTO button Pressing this button performs the following O For a computer signal The vertical position the horizontal position and the ie ee z horizontal phase will be automatically adjusted See Make sure that the application window is set to its maximum Be Pe size prior to attempting to use this feature A dark picture Sa may still be incorrectly adjusted Use a bright picture when Sog adjusting O For a video signal and s video signal The video format best suited for the respective input signal will be selected automatically This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu 442 The vertical position and horizontal position will be automatically set to the default O For a component video signal The vertical position and horizontal position will be automatically set to the default The horizontal phase will be automatically adjusted e The automatic adjustment operation requires approx 10 seconds Also please note that it may not function correctly with some input e When this function is performed for a video signal a certain extra such as a line may appear outside a picture e When this function is performed for a computer signal a black frame may be displayed on the edge of the screen depending on the Computer model e The items adjusted by this funct
2. 100 MEIMEI Replacing the lamp A lamp has finite product life Using the lamp for long periods of time could cause the pictures darker or the color tone poor Note that each lamp has a different lifetime and some may burst or burn out soon after you start using them Preparation of a new lamp and early replacement are recommended To prepare a new lamp make contact with your dealer and tell the lamp type number Type number DT01251 lamp cover Replacing the lamp 1 Turn the projector off and unplug the power cord Allow the projector to cool for at least 45 minutes 2 Prepare a new lamp If the projector is mounted on a ceiling or if the lamp has broken also ask the dealer to replace the lamp In case of replacement by yourself follow the following procedure 3 Loosen the screw marked by arrow of the lamp cover and then slide and lift the lamp cover to the side to remove it Loosen the 2 screws marked by arrow of the lamp and slowly pick up the lamp by the handle Never loosen any other screws Insert the new lamp and retighten firmly the 2 screws of the lamp that are loosened in the previous process to lock it in place While putting the interlocking parts of the lamp cover and the projector together slide the lamp cover back in place Then firmly fasten the screw of the lamp cover Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu 1 Press the MENU but
3. 8 Battery cover 17 fi The internal clock battery is small W inside 9 Speaker 12 22 48 10 Exhaust vent 11 AC IN AC inlet 114 12 Ports 15 13 Security bar 2115 14 Security slot L15 15 Lens door L106 16 Mirror 21106 17 Spacer Small 25 in ra fi 18 Spacer Large R425 NN tend Hf pe 19 PEN sensor 4107 aN S i NN Ag i N A j Lg ere oe CRT TRS X X h m Control panel STANDBYION button 20 1 a INPUT button 0122 mt INPUT P 3 POWER indicator 420 111 112 4 TEMP indicator L111 112 omg Focus 5 LAMP indicator 2111 112 ao Buttons lt P A V 6 FOCUS buttons when no menu is displayed 26 or Cursor lt gt buttons when a menu is ie eas FOCUS function is invalid when the USB TYPE A port is selected as the input source 7 MENU buttons when no menu is displayed 4130 or Cursor A V buttons when a menu is displayed 130 The lt A buttons on the projector work only as the cursor buttons while the template is displayed R454 Ports M9 13 1 USB TYPE A port 9 AUDIO OUT L R ports 2 LAN port 10 COMPUTER IN1 port 3 HDMI port 11 COMPUTER IN2 port 4 USB TYPE B port 12 MONITOR OUT port 5 MIC port 13 CONTROL port 6 AUDIO IN1 port 14 VIDEO port 7 AUDIO IN2 port 15 S VIDEO port 8 AUDIO IN3 L R ports ER IN2 COMPUTER IN m me A MIC AUDIO IN1 AURIO Gi Riedl S VID
4. The interactive pen may stop working when plugging in the USB cable or booting up a computer on which Starboard Software has been installed e Connect the projector after the computer starts up making sure the system is ready to use If you got the message dialog showing Projector is not connected after Check Connection command through the Starboard Software menu and the interactive pen still does not work turn the projector power off and try again from the beginning This may be due to exhaustion of the battery of the pen Replace the battery with new one Use only the specified and perfect battery When putting it in be careful not to make a mistake in polarity This may be due to poor contact of the battery in the pen Remove the battery and load it again Use only the specified and perfect battery When putting it in be careful not to make a mistake in polarity There may be obstacles in between the interactive pen and sensors on the projector e Remove all things between the pen and sensors The way of you hold the pen or your position may affect the system Hold the pen as perpendicular to the interactive surface as possible and be careful not to block the path from the pen to the sensors It is recommended to keep the room temperature between 16 C and 35 C when using the interactive function The LiveViewer may not display the annotations that are made by Starboard Software Use the latest LiveViewer s
5. ha ppear The projector is operating in Eco mode a Set ECO MODE to NORMAL and set AUTO ECO MODE to 46 47 OFF in the SETUP menu The lamp is approaching the end of its product lifetime 101 102 Replace the lamp Either the focus and or horizontal phase settings are not properly adjusted 26 40 Pictures appear Adjust the focus using the FOCUS button and or H PHASE i blurry using the menu function The lens is dirty or misty 106 Clean the lens referring to the section Caring for the lens When the projector is operating in Eco mode flickering may appear on screen Set ECO MODE to NORMAL and set AUTO ECO MODE to Some kind OFF in the SETUP menu Fi P A The OVER SCAN ratio is too big 38 such as Adjust OVER SCAN in the IMAGE menu smaller flickering or Excessive VIDEO NR A sil are al Change the setting of VIDEO NR in the INPUT menu The FRAME LOCK function cannot work on the current input signal 43 Set FRAME LOCK in the INPUT menu to OFF continued on next page 115 Phenomena that may be easy to be mistaken for machine defects continued A f Reference Phenomenon Cases not involving a machine defect sone The computer The computer cannot start up in the current hardware connected to the configuration USB TYPE B port Disconnect the USB cable from the computer then of the projector reconnect it after starting up the computer does not start up The SAVING function is working
6. The following functions can be supported in the Full Screen mode Button operation The keypad Web Remote on the in web browser projector software y y gt M gt or or Shows the next picture PAGE DOWN PAGE DOWN A A A lt lt l or Shows the previous picture or 4 or The remote Functions control Displays Thumbnail NOTE These operations are not accessible while the projector OSD is displayed e It is not possible to change the input port by using the INPUT button when the Thumbnail screen Slideshow or Full Screen is displayed 92 PC LESS Presentation continued Slideshow mode The Slideshow mode displays images in full screen and switches the images at intervals set in INTERVAL on the Thumbnail screen menu L488 You can start this function from the Slideshow menu To display the Slideshow menu select the SLIDESHOW button in the Thumbnail mode and press the ENTER button on the remote control or INPUT button on the projector The following operations can be accessible while the Slideshow is displayed Button operation The keypad Web Remote on the in web browser projector software The remote control Functions ENTER INPUT ENTER Displays thumbnail These operations are not accessible while the projector OSD is displayed NOTE It is not possible to change the input port by using the INPUT button when the Thumbnail screen Slides
7. the RESET button on the remote control for about 3 seconds or ENTER PASSWORD press and hold the INPUT button for 3 seconds while pressing the 123 gt button on the projector 2 The 10 digit Inquiring Code will be displayed Contact your dealer EE with the 10 digit Inquiring Code Your password will be sent after 01 2345 6789 your user registration information is confirmed e If there is no key input for about 55 seconds while the Inquiring Code is displayed the menu will close If necessary repeat the process from 1 ltem i escription 1 Use the A V buttons on the SECURITY menu QET to select SECURITY PASSWORD CHANGE ENTER NEW PASSWORD and press the gt button to display the ENTER 0000 NEW PASSWORD box 2 Use the A gt buttons to enter the new password 3 Move the cursor to the right side of the ENTER NEW PASSWORD box and press the zeus tin SECURITY gt button to display the NEW PASSWORD NEW PASSWORD AGAIN S PASSWORD AGAIN box enter the same password again ieee CHANGE 4 Move the cursor to the right side of the NEW Sree yar eer PASSWORD AGAIN box and press the gt NOTE NEW PASSWORD button and the NOTE NEW PASSWORD box 0000 will be displayed for about 30 seconds please make note of the password during this time Pressing the ENTER button on the remote control or button on the projector will close the NOTE NEW PASSWORD box e Please do not forget your password SECURITY 0 continued on next
8. INTERACTIVE S SETUP projector may cause trouble on the network Be sure PICTURE 9R PROJECTOR NAME to consult with your network administrator before ae pe E connecting to an existing access point on your network ees oe Select NETWORK from the main menu to access ae the following functions E EASY MENU Select an item using the A V cursor buttons on the iil coil aati projector or remote control and press the gt cursor button on the projector or remote control or ENTER button on the remote control to execute the item Then perform it according to the following table See the User s Manual Network Guide for details of NETWORK operation NOTE If you are not utilizing SNTP LLDate Time Settings in the User s Manual Network Guide then you must set the DATE AND TIME during the initial installation e The network communication control is disabled while the projector is in standby mode if the STANDBY MODE item of SETUP menu is set to SAVING Please connect the network communication to the projector after setting the STANDBY MODE to NORMAL 247 e Performance may suffer if the image displayed from the LAN Port is used while using Interactive Function It is recommended to use COMPUTER IN or HDMI connection ltem escription Selecting this item displays the SETUP SETUP Menu for the network amp IP ADDRESS Use the A V buttons to select an item SUBNETMASK and the gt or ENTER button on t
9. DOT LINE2 amp DOT LINE3 2 2 MAP2 MAP1 amp CIRCLE2 CIRCLE1 DOT LINE4 You can turn a map upside down and scroll it horizontally when MAP1 or MAP2 is selected To invert or scroll the map display the guidance by pressing the RESET button on the remote three seconds or more when MAP1 or MAP2 appears continued on next page 54 ltem scription O O O OO The C C is the function that displays a CC transcript or dialog of the audio portion of vee eae a video files or other presentation or other hemen relevant sounds It is required to have NTSC format video or 480i 60 format component video source supporting C C feature to utilize this function It may not work properly depending on equipment or signal source In this case please turn off the Closed Caption DISPLAY Select Closed Caption DISPLAY setting from following options using A V buttons AUTO ON amp OFF ee AUTO Closed Caption automatically displays when the volume is muted ON Closed Caption is on OFF Closed Caption is off e The caption is not displayed when the OSD menu is active e The Closed Caption is the function to display the dialogue narration and or sound effects of a television program or other C C video sources The Closed Caption availability is depending upon Closed Caption broadcaster and or content MODE Select Closed Caption MODE setting from following options using A V buttons CAPTIO
10. amp BOARD BLACK DAYTIME WHITEBOARD BOARD GREEN GAMMA COLOR TEMP NORMAL 1 DEFAULT 2 MID PICTURE MODE 2 MID 6 H BRIGHT 3 e When the combination of GAMMA and COLOR TEMP differs from pre assigned modes above the display on the menu for the PICTURE MODE is CUSTOM Please refer to the GAMMA and COLOR TEMP E1135 36 items in PICTURE menu e Lines or other noise might appear on the screen when this function is operated but it is not a malfunction Using the lt gt buttons changes the eco mode setting ECO MODE See the ECO MODE item in SETUP menu 47 MIRROR Using the lt gt buttons switches the mode for mirror status See the MIRROR item in SETUP menu G47 Performing this item resets all of the EASY MENU items except the RESET FILTER TIME and LANGUAGE A dialog is displayed for confirmation Selecting the OK using the gt button performs resetting The usage time of the air filter is shown in the menu Performing this item resets the filter time which counts usage time of the air filter ote ME A dialog is displayed for confirmation Selecting the OK using the gt button performs resetting See the FILTER TIME item in OPTION menu 4158 Using the lt gt buttons changes the display language LANGUAGE See the LANGUAGE item in SCREEN menu 50 Press the gt or ENTER button to use the menu of INTERACTIVE ADVANCED MENU PICTURE IMAGE INPUT SETUP AUDIO SCREEN OPTION NETWORK
11. i SS SS S 1 2 3 4 NOTE interactive Pen is henceforth denoted as pen 6 N SAN Uo Install the projector according to the environment and manner the projector will be used in Arrangement Refer to table T 1 and figures F 1 and F 2 at the end of User s Manual concise to determine the screen size and projection distance The values shown in the table are calculated for a full size screen 1280 x 800 Screen size diagonal D 6 Projection distance 8 1 2 Screen height 8 e For the case of installation in special conditions such as on the wall or ceiling the specified mounting accessories and service may be required Tabletop use must be setup with the designated optional accessories Before installing the projector consult your dealer about your installation e The screen position may shift after installation if the projector is mounted on locations such as the wall or ceiling due to the flexibility of the plastic projector body If readjustment is necessary consult with your dealer or service personnel e The projected image position and or focus may change during warm up approx 30 minutes after the lamp is turned on or when the ambient conditions change Readjust the image position and or focus as necessary Since the projector features an ultra short throw be aware that it is required to select a screen carefully to have better performance Asoft screen such as a pull down scr
12. 47 Select NORMAL for STANDBY MODE item in the SETUP menu RS 232C does The COMMUNICATION TYPE for the CONTROL port is not work set to NETWORK BRIDGE Select OFF for COMMUNICATION TYPE item in the OPTION SERVICE COMMUNICATION menu Network does The SAVING function is working 47 not work Select NORMAL for STANDBY MODE item in the SETUP menu NETWORK The NETWORK BRIDGE function is turned off BRIDGE Select NETWORK BRIDGE for COMMUNICATION TYPE item function does in the OPTION SERVICE COMMUNICATION menu not work Schedule function The SAVING function is working 47 does not work Select NORMAL for STANDBY MODE item in the SETUP menu When the Disconnect the LAN cable and check that the projector is projector is working properly connected to the If this phenomenon occurs after connecting to the network network it powers there may be a loop between two Ethernet switching hubs offandonas within the network as explained below described below There are two or more Ethernet switching hubs in a network Powers off Two of the hubs are doubly connected by LAN cables POWER indicator This double connection forms a loop between the two hubs blinks in orange a Such a loop may have an adverse effect on the projector as few times well as the other network devices Check the network connection and remove the loop by Goes into disconnecting the LAN cables such that there is only one standby mode connecting cab
13. CANCEL on screen and press the lt or ENTER button The screen will then return to the RESOLUTION menu displaying the previous resolution e For some pictures this function may not work well 44 SEMUR menu From the SETUP menu items shown in the table e am pe 7 D 0 below can be performed ie o TA MID Select an item using the A cursor buttons and LAN Dana o press the cursor button or ENTER button to ee ree ee we execute the item Then perform it according to the Reo 8 6 aE OONN LADI sasewene EXIT COMPUTER IN 1 1280 x 800 60Hz Using the Using the lt gt cursor buttons adjusts the magnification ratio cursor buttons adjusts the magnification ratio Small amp Large e The on screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT D ZOOM VY KEYSTONE and K KEYSTONE Changing the values of ASPECT D ZOOM J KEYSTONE and K KEYSTONE may fix the symptom Using the lt gt A V cursor buttons adjusts the picture position D SHIFT e The D SHIFT adjustment values are not valid when the D ZOOM is set to 320 full screen Using the A cursor buttons selects the horizontal picture position LEFT MID RIGHT The PICTURE POSITION is not changed if any of the following cases apply e The ASPECT is set to 16 9 or 16 10 e The input signal has an aspect ratio of 16 9 16 10 or verticallly PICT POSIT H smaller than 16 1
14. Code Code box will be displayed 1 3 Input a 4 part PIN code using the A W lt gt COMPUTER or INPUT button The PIN Code again box will appear Reenter igiie the same PIN code This will complete the PIN aizies code registration e If there is no key input for about 55 seconds while the Enter PIN Code box or the PIN Code again box is displayed the menu will close If necessary repeat the process from 1 1 Afterwards anytime the projector is restarted after AC power is turned off the Enter PIN Code box will be displayed Enter the registered PIN code The projector can be used after entering the registered PIN code If an incorrect PIN code is input the Enter PIN code box will be displayed again OROCHRORO ri CTTU ORORORG ritee0i353 3 PIN LOCK If an incorrect PIN code is input 3 times the projector will turn off Afterwards the projector will turn off every time an incorrect PIN code is input The projector will also turn off if there is no key input for about 5 minutes while the Enter PIN code box is displayed This function will activate only when the projector is started after AC power is turned off e Please do not forget your PIN code 2 Turning off the PIN LOCK 2 1 Follow the procedure in 1 1 to display the PIN LOCK on off menu 2 2 Use the A V buttons to select OFF and the Enter PIN Code box will be displayed Enter the registered PIN code to turn the PIN LOCK function off If an incorrect PIN code is input 3 ti
15. GAIN of the selected mode CENTER TEST PATTERN COLOR TEMP OFFSET adjustments change the color intensity on the whole tones of the test pattern GAIN adjustments mainly affect color intensity on the brighter tones of the test pattern Choose an item using the lt gt buttons and adjust the level using the A V buttons You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button Each time you press the ENTER button the pattern changes as below No pattern gt Gray scale of 9 steps L Ramp Gray scale of 15 steps e Lines or other noise might appear on the screen when this function is operated but it is not a malfunction Using the lt gt buttons adjusts the strength of whole color Weak Strong e This item can be selected only for a video s video and component video signal e For an HDMI signal this item can also be selected if either 1 or 2 applies 1 HDMI FORMAT item in the INPUT menu is set to VIDEO 2 HDMI FORMAT item in the INPUT menu is set to AUTO and the projector recognizes that it receives video signals Using the lt gt buttons adjusts the tint Reddish Greenish e This item can be selected only for a video s video and component video signal e For an HDMI signal this item can also be selected if either 1 or 2 applies 1 HDMI FORMAT item in the INPUT menu is set to VIDEO 2 HDMI FORMAT item in the INPUT menu is set
16. Press the STANDBY ON button on the projector or the remote control The message Power off will appear on the screen for about 5 seconds 2 Confirm that there is nothing that the lens door hits while closing Press the STANDBY ON button again while the message appears If the pen sensor is within easy reach attach the sensor cover provided to keep it from getting dusty The projector lamp will go off and the POWER indicator will begin blinking in orange The lens door will close right after the lamp goes off However to maintain better picture quality the lens door will close after the lamp has been cooled down when the projector is installed upside down such as in ceiling mount installation Then POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete 111 Do not turn the projector on for about 10 minutes or more after turning it off Also do not turn the projector off shortly after turning it on Such operations might cause the lamp to malfunction or shorten the lifetime of some parts including the lamp NOTE Turn the power on off in right order Please power on the projector prior to the connected devices e This projector has the function that can make the projector automatically turn on off Please refer to the DIRECT POWER ON 456 and AUTO POWER OFF 457 items of the OPTION menu 21 Operating VOLUME button Adjusting the volume 1 Use the VOLUME VOL
17. Quit on the menu NOTE The LiveViewer refer to the User s Manual Network Guide and this application cannot be used at the same time If you connect your computer to the projector by using a USB cable while the LiveViewer is running the following message will be displayed e Depending on the software installed on your computer images on your computer cannot be transferred using LiveViewer Lite for USB e If any application software having the firewall function is installed into your computer make the firwall function invalid with following the user s manual e Some security software may block image transmission Please change the security software setting to allow the use of LiveViewer Lite for USB e If the computer in use is equipped with HDMI port the audio setting will be changed and sound interruption or noise may occur when the HDMI cable is connected or disconnected during USB Display In this case restart USB Display e Image distortion or sound interruption may occur when LiveViewer is connected to LAN during USB Display The above decline in performance is noticeable especially when multiple computers are connected to LiveViewer 97 USB Display continued Right Click menu The menu shown in the right will be displayed Display when you right click the application icon in the Windows notification area Quit e 300 PM Display The Floating menu is displayed and the icon disap
18. be adjusted up to plus or minus 1 each of FRONT and REAR foot e After the foot is adjusted it is possible to return it to the state of the shipment with a spacer Install Large on the Front foot and Small on the Rear foot of the spacer If change the setting place of the projector it will recommend keep and reuse the spacers Adjusting the zoom and focus Press the D ZOOM or D ZOOM button on the remote D ZOOM button control to display D ZOOM dialog on screen Use the D ZOOM and D ZOOM buttons to adjust the picture size To finish the operation do not touch these buttons for a few seconds until the dialog is disappeared e If you want to expand a part of the image use the magnify function 28 D ZOOM button 25 Press the FOCUS or FOCUS button on the remote FOCUS button control or FOCUS or FOCUS button on the projector 15 while no menu is on screen to display the FOCUS box on screen Use the FOCUS and FOCUS buttons to adjust the screen focus After the focus adjustment wait for a while until the FOCUS box is disappeared if you want to display any other menu on screen by pushing the MENU button on the projector e The lt A V buttons on the projector work only as the cursor buttons while the template is displayed 54 e FOCUS button on the projector is invalid when the USB FOCUS button TYPE A port is selected as the input source
19. can be supported while the Thumbnail is displayed Button operation The remote The keypad on Web Remote in web Functions control the projector browser software AlV lt gt AlV lt gt AlV lt gt Move cursor PAGE UP PAGE UP PAGE DOWN PAGE DOWN Switches pages e Displays the selected image on the Full Screen mode when a cursor is on a thumbnail image e Displays the SETUP menu next for the selected image when a cursor is on a thumbnail image number The SETUP menu for the selected image Functions Use the lt gt cursor buttons to switch each setting or use the gt cursor button to execute the functions as follows RETURN o gt cursor button or ENTER to return to the Thumbnail Switch to ON to set the selected image as the first image in the Slideshow This setting information will be saved in the playlist txt file L95 Switch to ON to set the selected image as the last image in the STOP Slideshow This setting information will be saved in the playlist txt file L95 SKIP Switch to ON to skip the selected image in the Slideshow This setting information will be saved in the playlist txt file L95 Press the cursor button or ENTER to rotate the selected ROTATE image 90 degrees clockwise This setting information will be saved in the playlist txt file R495 89 PC LESS Presentation continued Operating by the menu on the Thumbn
20. cord e Only plug the power cord into an outlet whose voltage is matched to the power cord The power outlet should be close to the projector and easily accessible Remove the power cord for complete separation e Do not distribute the power supply to multiple devices Doing so may overload the outlet and connectors loosen the connection or result in fire electric shock or other accidents e Keep the sensor cover away from children and pets Be careful so that they do not put it into their mouth NOTICE gt Please ensure that dust is not adhered to the pen sensor as it will deteriorate the performance of the sensor With the exception of installing the projector in high places you can use the sensor cover provided to keep the pen sensor from getting dusty when it is not in use Take care not to lose the cover for the pen sensor when it is not in use 14 Using the security bar and slot Security slot A commercial anti theft chain or wire up to 10 mm in diameter can be attached to the security bar on the projector Also this product has the security slot for the Kensington lock For details see the manual of the security tool Security bar Anti theft chain or wire NOTE The security bar and slot is not comprehensive theft prevention measures It is intended to be used as supplemental theft prevention measure Using the cable cover Utilize the cable cover as the guard and blind for the conne
21. from up to four computers on screen that is divided into quarter sections Select this item to display a dialog Use the dialog to change the display mode as explained below continued on next page 71 ltem scription O e To change from Multi PC mode to Single PC mode select one of computers in the dialog using the A lt gt buttons and press the ENTER or INPUT button Press the gt button to choose OK and then press ENTER or INPUT again The image for the selected computer is displayed on full screen e To change from Single PC mode to Multi PC mode press button to choose OK in the dialog and press the ENTER or INPUT button The display mode is changed e For details on how to switch MALEC the display mode to Multi PC continued mode on your computer see the section Switching the CENTER amp SET display mode in the User s Manual Network Guide G MULTI PC MODE 1 2 3 4 PRESENTATION e The Presenter mode setting of the selected continued computer becomes valid when the display mode is changed to Single PC mode S2 MULTI PC MODE T Also the Presenter mode setting a E becomes invalid when the mz display mode is changed to Multi oS PC mode regardless the setting ENTER on the computers ee For details see the section Presenter mode in the User s Manual Network Guide Selecting this item displays the user name This function helps you identify from which comp
22. in the LANGUAGE dialog Press the ENTER or INPUT button to save the language setting Using the A W lt gt buttons adjusts the menu position MENU POSITION To quit the operation press the MENU button on the remote control or keep no operation for about 10 seconds Using the A V buttons switches the mode for the blank screen The blank screen is a screen for the temporarily blanking feature 29 It is displayed by pressing the BLANK button on the remote control MyScreen ORIGINAL BLUE WHITE amp BLACK MyScreen Screen can be registered by the MyScreen item 51 ORIGINAL Screen preset as the standard screen BLUE WHITE BLACK Plain screens in each color e To avoid remaining as an afterimage the MyScreen or ORIGINAL LANGUAGE screen will change to the plain black screen after several minutes Using the A V buttons switches the mode for the start up screen The start up screen is a screen displayed when no signal or an unsuitable signal is detected MyScreen ORIGINAL OFF MyScreen Screen can be registered by the MyScreen item 151 START UP ORIGINAL Screen preset as the standard screen OFF Plain black screen e To avoid remaining as an afterimage the MyScreen or ORIGINAL screen will change to the BLANK screen above after several minutes If also the BLANK screen is the MyScreen or ORIGINAL the plain black screen is instead used e When the ON is selected to the MyScreen PASSWORD
23. is connected to the computer with wireless LAN using a LAN cable To use NETWORK BRIDGE function also connect the CONTROL port and an RS 232C port of the external device to communicate as a network terminal See the User s Manual Network Guide for details of the network functions Access point Computer LAN RS 232C useten HDMI COMPUTERIN2 COMPU ERIN i core ee OO sp cams o NOTE If an oversized USB storage device blocks the LAN port use a USB extension cable to connect the USB storage device Connecting to a power supply 4 Put the connector of the power cord into the AC IN AC inlet of the projector 2 Firmly plug the power cord s plug into the outlet In a couple of seconds after the power supply connection the POWER indicator will light up in steady orange Please remember that when the DIRECT POWER ON function activated R456 the ACIN Power cord connection of the power supply make the projector turn on 3 Make sure that the cover is not attached to the pen sensor when the interactive pen is used AWARNING PPlease use extra caution when connecting the power cord as incorrect or faulty connections may result in fire and or electrical shock e Do not touch the power cord with a wet hand e Only use the power cord that came with the projector If it is damaged consult your dealer to get a new one Never modify the power
24. is input the menu will Goei close If necessary repeat the process from 2 1 ENTER PASSWORD box large 3 If you have forgotten your password 3 1 Follow the procedure in 1 1 to display the TRANSITION DETECTOR on off menu 3 2 Select OFF to display the ENTER PASSWORD box large The 10 digit Inquiring Code will be displayed inside the box 3 3 Contact your dealer with the 10 digit Inquiring Code Your password will be sent after your user registration information is confirmed lt lt TRANSITION DETECTOR ON gt gt continued on next page 77 ltem escription O O O The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten When the password is set for the MY TEXT e The MY TEXT DISPLAY menu will be unavailable which can prohibit changing the DISPLAY setting e The MY TEXT WRITING menu will be unavailable which can prevent the MY TEXT from being overwritten 1 Turning on the MY TEXT PASSWORD 1 1 Use the A buttons on the SECURITY menu to emere select the MY TEXT PASSWORD and press the a gt button to display the MY TEXT PASSWORD on off menu 1 2 Use the A V buttons on the MY TEXT PASSWORD on off menu to select ON The Agia ENTER NEW PASSWORD box small will EUEN NENTA OE be displayed t a 1 3 Use the A W lt b gt buttons to enter the ENTER NEW PASSWORD password Move the cursor to the right side box small of the ENTER NEW PASSWORD box small and press the gt button to display the NE
25. page 74 ltem escription O O O The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten 1 Turning on the MyScreen PASSWORD 1 1 Use the A V buttons on the SECURITY menu to F MyScreen PASSWORD select MyScreen PASSWORD and press the gt ON button to display the MyScreen PASSWORD on RETURN EXIT off menu 1 2 Use the A V buttons on the MyScreen F MyScreen PASSWORD PASSWORD on off menu to select ON ENTER NEW PASSWORD The ENTER NEW PASSWORD box small ae will be displayed ENTER NEW PASSWORD 1 3 Use the A W lt b buttons to enter the box small password Move the cursor to the right side ASSESS of the ENTER NEW PASSWORD box small sa ores and press the button to display the NEW PASSWORD AGAIN box enter the same PASSWORD again 1 4 Move the cursor to the right side of the NEW PASSWORD AGAIN box and press the gt button to display the NOTE NEW PASSWORD box for about 30 seconds please make note of the password during this time Pressing the ENTER button on the remote control or button on the MyScreen projector will return to MyScreen PASSWORD on off menu PASSWORD When a password is set for MyScreen e The MyScreen registration function and menu will be unavailable e The MyScreen Lock menu will be unavailable e The START UP setting will be locked on MyScreen and the menu will be unavailable Tu
26. press the gt button or the ENTER button GLENS DOORCLOSE EXECUTE on the remote control to execute the item FACTORY RESET ETURN FAN SPEED Using the A V buttons switches the rotation speed of the cooling fans If the projector is used at an altitude of about 1600 m or higher select HIGH Otherwise select NORMAL Note that the projector is noisier when the HIGH is selected HIGH NORMAL AUTO ADJUST Using the A V buttons to select one of the mode When the DISABLE is selected the automatic adjustment feature is disabled FINE amp FAST amp DISABLE _ FINE Finer tuning including H SIZE adjustment FAST Faster tuning setting H SIZE to prearranged data for the input signal e Depending on conditions such as input image signal cable to the projector environment around the projector etc the automatic adjustment SERVICE may not work correctly In such a case please choose DISABLE to disable the automatic adjustment and make adjustment manually GHOST 1 Select a color element of ghost using amp SERVICE_GHOST the lt P gt buttons 2 Adjust the selected element using the A V buttons to disappear ghost FILTER MESSAGE Use the A V button to set the timer for notifying by the message when to replace the filter unit 500h 1000h 2000h 3000h 4000h 5000h OFF After choosing an item except OFF the message REMINDER HRS PASSED will appear after the timer reache
27. screen by pressing the FREEZE button The indication of the TEMPLATE displayed by changing The indication of FOCUS displayed by changing The D ZOOM dialog displayed by changing e When the OFF is selected please remember if the picture is frozen Do not mistake freezing for a malfunction E129 continued on next page 52 Pp lem Desoripion O Each input port for this projector can have a name applied to it 1 Use the A buttons on the SCREEN menu to select SOURCE NAME and press the gt or ENTER button The SOURCE NAME menu will be displayed 2 Use the A buttons on the SOURCE toe n NAME menu to select the port to be ey eooo named and press the gt button The COMPUTER IN2 gt LA LAN SOURCE NAME dialog will be displayed Seas USB TYPE B gt HDMI Right side of the menu is blank until a SVIDEO VIDEO name is specified RETURN 3 Select an icon you would like to assign to SOURCE NAME the port in the SOURCE NAME dialog The name assigned to the port will also be automatically switched according to your icon selection Press the ENTER or INPUT button to determine your icon selection 4 Select a number you would like to assign to the port along with the icon You can select the number either from blank no number assigned 1 2 3 or 4 Then press the ENTER or INPUT button 5 If you would like to modify the name assigned to the port select CUSTOM NAME and press the
28. the StarBoard Software e Notations in the StarBoard Software manual may differ from those in this manual e Please regards the word StarBoard found in StarBoard Software manual online help software message or any other related materials as the interactive whiteboard system using the Hitachi Interactive Projector or the projector StarboardSoftware is not changed e The set of functions that are available for the combination of Hitachi Interactive Projector and Starboard Software is in conformity with the Starboard FX Portable Series e Touch the blinking red part with the pen until it turns to a blinking green during calibration For more details on calibration see the DVD of the StarBoard Software 86 PC LESS Presentation The PC LESS Presentation reads image data from storage media inserted into the USB TYPE A port and displays the image on the following modes The PC LESS Presentation can be started by selecting the USB TYPE A port as the input source This feature allows you to make your presentations without using your computer Thumbnail mode L488 Full Screen mode 492 Slideshow mode 193 Supported storage media e USB memory USB memory type USB hard disk and USB card reader type NOTE USB readers adapters that have more than one USB slot may not work if the adapter is acknowledged as multiple devices connected e USB devices with security software may not work e Be careful w
29. the pen may not function properly if it is used near an equipment that emits infrared wavelengths plasma display motion sensor or automatic lighting sensor etc e The pen detects positions using ultrasonic waves and therefore may not function properly when used in an environment where resonance is likely to occur such as at the corner of a room or beside a metallic shelf Malfunction may occur when two or more projectors are used in the same room e The pen movement may be disrupted if the projector is used near an inverter fluorescent light or when the light of an inverter fluorescent light falls directly on the screen e The PEN sensor may not work correctly if strong light such as direct sunlight or light from an extremely close range such as from an inverter fluorescent lamp falls on the PEN sensor of the projector Adjust the position of projector avoiding those lights e When dust accumulates on the two horns of the pen sensor the pen may malfunction or it may not function at all When this occurs check the horns of the pen sensor and remove any dust accumulated on them using a vacuum cleaner 81 NOTE Install and use at a position where the screen size is between 60 100 when digital zoom is at the maximum 100 and the KEYSTONE and PERFECT FIT functions are not used If the KEYSTONE or PERFECT FIT function is used the position of the pen may not be reflected correctly on the screen or pen operation may n
30. the projector LiveViewerLiteUSB exe will run automatically and the application LiveViewer Lite for USB will be ready on your computer for the USB Display The application LiveViewer Lite for USB will close automatically when the USB cable is unplugged However it may remain displayed at times NOTE If the software does not start automatically this is typically because CD ROM autorun is disabled on your OS follow the instructions below 1 Click on the Start button on the toolbar and select the Run 2 Enter F LiveViewerLiteUSB exe and then press the OK If your CD ROM drive is not drive F on your computer you will need to replace F with the correct drive letter assigned to your CD ROM drive e CD ROM autorun is disabled while the screen saver is running e The image transmission from the computer is suspended while the password protected screen saver is running To resume the transmission exit the screen saver e If Waiting for connection remains displayed while the USB cable is connected remove the USB cable and reconnect after a while e Please check and get the latest version at Hitachi Web site http www hitachi america us digitalmedia or http www hitachidigitalmedia com Follow the instructions that can be obtained at the site for updating 96 This application will appear in the Windows notification area once it starts You can quit the application from your computer by selecting
31. using the SERVICE_REMOTE FREQ ON 1 NORMAL 2 HIGH SERVICE CONTROL port continued OPTION_SERVICE _ COMMUNICATION SERIAL SETTINGS TRANSMISSION METHOD HALF DUPLEX RESPONSE LIMIT TIME RETURN COMMUNICATION Select an item using the cursor buttons A V Then pressing the button opens the submenu for the setting item you selected Or pressing the lt button instead of the gt button makes the menu back to the previous one without changing the setup Each submenu can be operated as described above e When COMMUNICATION TYPE 164 is set to OFF the other items in COMMUNICATION menu are invalid e For the function of serial communication refer to the User s Manual Network Guide continued on next page 63 tem escription COMMUNICATION TYPE Select the communication type for transmission via the CONTROL port NETWORK BRIDGE OFF NETWORK BRIDGE Select this type if it is required to control an external device as a network terminal via this projector from the computer The CONTROL port doesn t accept RS 232C commands MNetwork Bridge Function in the User s Manual Network Guide OFF Select this mode to receive RS 232C commands using the CONTROL port e OFF is selected as the default setting e When you select the NETWORK BRIDGE check the item TRANSMISSTION METHOD below SERIAL SETTINGS Select the serial communication condition for the CONTROL port
32. vacuum cleaner The StarBoard Software files may be corrupted or installation may not have completed successfully Uninstall the StarBoard Software and reinstall it Has the battery run out Replace it with a new one Other than those above e Disconnect the power supply for the projector and connect again Restart Windows and StarBoard Software Has the battery run out Replace it with a new one Check the horns of the pen sensor and remove any dust accumulated on them using a vacuum cleaner Is the tip of the pen worn out Replace the tip of the pen with a new one Is calibration of the pen position correctly performed Perform calibration of the pen position For more details refer to the manual for the StarBoard Software in the bundled DVD ROM Is the projector inclined Install the projector correctly and horizontally before performing calibration of the pen position Is dust accumulated on the two horns of the pen sensor 107 continued on next page 119 Phenomena that may be easy to be mistaken for machine defects continued Cases not involving a machine defect patti Is the projector correctly installed 81 82 Check the installed position of the projector Is the computer image projected within the area of the screen Install and use at a position where the screen size is between 60 100 when digital zoom is at the maximum 100 and the KEYSTONE and PERFECT FIT
33. will appear again if the MAGNIFY ON button is pressed when the dialog has automatically disappeared e The magnification is automatically disabled when the displaying signal or its display condition is changed e While the magnification is active the keystone distortion condition may vary It will be restored when the magnification is disabled e Some horizontal stripes might be visible on the image while magnification is active e This function is not available in the following cases 28 A sync signal in the range not supported is input There is no input signal Temporarily freezing the screen 4 Press the FREEZE button on the remote control FREEZE button The FREEZE indication will appear on the screen however the indication will not appear when the OFF is selected for the MESSAGE item in the SCREEN menu 452 and the projector will go into the FREEZE mode which the picture is frozen To exit the FREEZE mode and restore the screen to normal press the FREEZE button again e The projector automatically exits from the FREEZE mode when some control buttons are pressed e f the projector continues projecting a still image for a long time the LCD panel might possibly be burned in Do not leave the projector in the FREEZE mode for too long e Images might appear degraded when this function is operated but it is not a malfunction Temporarily blanking the screen 4 Press BLANK but
34. 0 while ASPECT is set to NORMAL e Horizontal size of the displayed image is full on the effective display area while the ASPECT is set to NATIVE e One of the following messages is displayed on the screen NO INPUT IS DETECTED SYNC IS OUT OF RANGE INVALID SCAN FREQ e The BLANK or TEMPLATE function is selected Using the lt gt buttons corrects the vertical keystone distortion Shrink the bottom of the image Shrink the top of the image 7 KEYSTONE The adjustable range of this function will vary among inputs For some input this function may not work well e This function will be unavailable when the Transition Detector is on L77 or the PERFECT FIT 446 is adjusted continued on next page 45 pttem escription Using the lt gt buttons corrects the horizontal keystone distortion Shrink the right of the image Shrink the left of the image KEYSTONE The adjustable range of this function will vary among inputs For some input this function may not work well e This function will be unavailable when the Transition Detector is on L77 or the PERFECT FIT 446 is adjusted This item allows you to adjust the shape of the projected image in each of the corners and sides 1 Choose a corner or side to adjust using the A W lt gt buttons and press the ENTER or INPUT button 2 Adjust the distortion as below Use the A lt gt buttons to adjust the position of the corner Use t
35. 00 60Hz ltem escription VOLUME Using the lt gt buttons adjusts the volume Low amp High Using the A V buttons turns on off the built in speaker SPEAKER ON amp OFF When OFF is selected the built in soeaker does not work While the image signal from the input port chosen in step 1 is projected the audio signal from the input port selected in step 2 is output to both the AUDIO OUT port and built in speaker of this projector However the built in soeaker does not work when SPEAKER is set to OFF 1 Choose a picture input port using the SAG SOURCE A V buttons Choose STANDBY to select the sound aoi output in the standby mode USB TYPE B 2 Select one of the AUDIO IN ports using Seo lt P gt buttons one Select X to mute the sound from the input port or in the standby mode chosen in the step 1 e In the AUDIO SOURCE window H symbolizes the audio signal from the HDMI port It can be selected only for the picture input from the HDMI port e Even if the projector is in the standby mode cooling fans may work and make noises when the built in speaker is in operation e C C Closed Caption is automatically activated when X is selected and an input signal containing C C is received This function is available only when the signal is NTSC for VIDEO or S VIDEO or 480i 60 for COMPUTER IN1 or COMPUTER IN2 and when AUTO is selected for DISPLAY in the C C menu under the SCREEN menu E055 AUDIO IN 2 O0OJjo0o
36. 000000 mojo0000000 0OJ 00000000w jo0000000 X AUDIO SOURCE continued on next page 48 ptem scription Using the A V buttons switches the mode for the HDMI audio Check each of the two modes provided and select the suitable one for your HDMI audio device 122 HDMI AUDIO Using the A V buttons switches the input level to match that of the microphone connected to the MIC port MIC LEVEL HIGH amp LOW HIGH for a microphone with an amplifier LOW for a microphone without an amplifier Using the lt gt buttons adjusts the volume of the microphone MIC VOLUME connected to the MIC port Low High 49 SNENA From the SCREEN menu items shown in the table below can be performed Select an item using the A V cursor buttons and press the cursor button or ENTER button to execute the item Then perform it according to the following table 1 ADVANCED MENU m INTERACTIVE PICTURE IMAGE INPUT 4 SETUP D AUDIO j amp OPTION as NETWORK SECURITY E EASY MENU EXIT LANGUAGE MENU POSITION x BLANK amp START UP A MyScreen E MyScreen Lock MESSAGE EY SOURCE NAME TEMPLATE C C COMPUTER IN 1 3 SELECT ENGLISH BLACK ORIGINAL EXECUTE OFF ON TEST PATTERN 1280 x 800 60Hz p ltem escription Using the A lt b buttons switches the OSD On Screen Display language ENGLISH lt FRANCAIS amp DEUTSCH ESPANOL shown
37. 12 MB or higher v OS One of the following Windows XP Home Edition Professional Edition 32 bit version only Windows Vista Home Basic Home Premium Business Ultimate Enterprise 32 bit version only Windows 7 Home Basic Home Premium Professional Ultimate Enterprise 32 bit version only v Application Internet Explorer 6 0 7 0 8 0 Power Point 2002 2003 2007 2010 v Others DirectX 9 0C v DVD ROM drive 80 Interactive Function continued When using the interactive function the recommended computer specifications are shown below v CPU Intel Core2 Duo 2 0 GHz or faster v Memory 1 GB or more Windows XP 2 GB or more Windows Vista and Windows 7 v HDD 600 MB free space v Display High Color 16 Bit or more v Web browser Internet Explorer 6 0 7 0 8 0 Hardware overlay capability is required on the graphics processor for movie playback function A DV Capture Device that supports Direct Show with a WDM device is required for playback and capturing on Web cam NOTE Do not place the projector near equipment that may emit electromagnetic waves or radio waves such as a radio transmitter TV copier or air conditioner e Avoid excessively dusty places or places that are subject to extremely high or low temperature or humidity e The pen makes use of infrared light to detect positions Avoid using it ata place where the screen surface is directly exposed to sunlight Also note that
38. 12345678901 1280 x 800 60Hz Item Description Executing this item starts or cancels calibration of the position of the pen eae For more details refer to the manual for the StarBoard Software in the bundled DVD ROM G80 ASPECT Using the lt gt buttons switches the mode for aspect ratio See the ASPECT item in IMAGE menu 438 Using the lt cursor buttons adjusts the magnification ratio Small amp Large See the D ZOOM item in the SETUP menu E45 e The on screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT D ZOOM J KEYSTON and K KEYSTONE Changing the values of ASPECT D ZOOM VY KEYSTONE and K KEYSTONE may fix the symptom Using the lt gt buttons corrects the vertical keystone distortion KEYSTONE coe the KEYSTONE item in SETUP menu 0245 gt Using the lt gt buttons corrects the horizontal keystone distortion KEYSTONE Sse the KEYSTONE item in SETUP Menu 46 Pressing the button displays the dialog for adjusting the shape PERFECT FIT of the projected image in each of the corners and sides See the PERFECT FIT item in SETUP menu 4446 continued on next page 32 ltem escription O O O O O Using the lt gt buttons switches the picture mode The picture modes are combinations of GAMMA and COLOR TEMP settings Choose a suitable mode according to the projected source CC CINEMA DYNAMIC
39. 999 files can be registered to the Playlist However if some folders exist in the same directory the limit number is decreased by the number of folders Any files over the limit will not be shown in the Slideshow e If the storage device is protected or does not have sufficient space the playlist txt file cannot be created e For the Slideshow settings refer to the section Slideshow mode 193 95 USB Display The projector can display images transferred from a computer via an USB cable L10 Performance may suffer if the image displayed from the USB TYPE B Port is used while using Interactive Function It is recommended to use COMPUTER IN or HDMI connection Hardware and software requirement for computer e OS One of the following Windows XP Home Edition Professional Edition 32 bit version only Windows Vista Home Basic Home Premium Business Ultimate Enterprise 32 bit version only Windows 7 Starter Home Basic Home Premium Professional Ultimate Enterprise 32 bit version only e CPU Pentium 4 2 8 GHz or higher Graphic card 16 bit XGA or higher e Memory 512 MB or higher e Hard disk space 30 MB or higher e USB Port e USB cable 1 piece Select the USB DISPLAY for the USB TYPE B item in the OPTION menu When you connect your computer to the USB TYPE B port on the projector using a USB cable the projector will be recognized as a CD ROM drive on your computer Then the software in
40. A dialog will appear 3 Press the button to select OK on the dialog It performs resetting the filter time NOTE Please replace the air filter when it is damaged or heavily soiled e When you replace the projection lamp please replace the air filter An air filter of specified type will come together with a replacement lamp for this projector e Please reset the filter time only when you have cleaned or replaced the air filter for a suitable indication about the air filter e The projector may display the message such as CHECK THE AIR FLOW or turn off the projector to prevent the internal heat level rising 104 Replacing the internal clock battery This projector has internal clock that uses a battery When the clock of the network function does not work correctly please try solution by replacement of the battery HITACHI MAXELL or HITACHI MAXELL ENERGY part number CR2032 or CR2032H Battery cover 1 Turn the projector off and unplug the power cord Allow the projector to cool sufficiently After making sure that the projector has cooled adequately slowly turn over the projector so that the bottom is facing 3 Turn the battery cover fully in the direction indicated OPEN using a coin or the like and pick the cover up to remove it Pry up the battery using a flathead screwdriver or the like to take it out While prying it up put a finger lightly on the battery since it may pop out of t
41. ASSWORD CHANGE MyScreen PASSWORD PIN LOCK TRANSITION DETECTOR My TEXT PASSWORD My TEXT DISPLAY My TEXT WRITING Presentation tools 0 0 0 5 80 Interactive Function 80 PC LESS Presentation 87 Thumbnail Mode Full Screen Mode Slideshow mode Playlist USB Display 000085 96 Right Click menu Floating menu Options window Maintenance 00000008 101 Replacing the lamp 101 Cleaning and replacing the air filter 103 Replacing the internal clock battery 105 Caring for the mirror and lens 106 Other care 107 Troubleshooting 109 Related messages 109 Regarding the indicator lamps 111 Resetting all settings 113 Phenomena that may be easy to be mistaken for machine defects 113 Specifications Introduction Features The projector provides you with the broad use by the following features v The unique lens and mirror system realizes ultra short distance projection which gives you more various way of use v The motorized lens door offers you very simple use of the projector v The double layer filter system is expected to function longer and offers you less maintenance frequency v The HDMI port can support various image equipment which have digital interface to get clearer pictures on a screen This projector can be controlled and monitored via LAN connection This projector s network supports the PJLink standa
42. BAUD RATE 4800bps lt gt 9600bps 19200bps 38400bps Se SERVICE COMMUNICATION i tinued continued continued PARITY NONE amp ODD EVEN e The BAUD RATE is fixed to 19200bps and PARITY is fixed NONE when the COMMUNICATION TYPE is set to OFF LAabove TRANSMISSION METHOD Select the transmission method for communication by the NETWORK BRIDGE from the CONTROL port HALF DUPLEX FULL DUPLEX HALF DUPLEX This method lets the projector make two way communication but only one direction either transmitting or receiving data is allowed at a time FULL DUPLEX This method lets the projector make two way communication transmitting and receiving data at the same time e HALF DUPLEX is selected as the default setting e If you select HALF DUPLEX check the setting of the item RESPONSE LIMIT TIME 465 continued on next page 64 Item Description RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF DUPLEX through the CONTROL port OFF 1s 2s 3s OFF Select this mode if it is not required to check the responses from the device that the projector SERVICE COMMUNICATION Sends data to In this mode the projector can send out data from the computer continuously 1s 2s 3s Select the time period to keep the projector waiting for response from the device t
43. COMPUTER IN2 ports Optimal performance cannot be achieved using input signals from the USB TYPE B and LAN ports e Noise through the USB cable may trigger a malfunction depending on the computer and projector you are using When this occurs check to ensure that the power cables of the computer and projector are grounded Malfunction may occur if the cables are not grounded e The pen sensor may be blocked if the projector is placed directly on the floor It is recommended the projector be mounted on the wall or ceiling The Interactive Function does not work during rear projection e It is also recommended to use an HDMI port alternative to a COMPUTER IN port 83 Interactive Function continued Preliminary preparation To use the Interactive Function a special pen is needed M6 Insert battery into the pen before using 19 Using the pen To write or draw using the pen press the tip of the pen against the screen surface and move the pen accordingly Writing ends once the tip of the pen is moved away from the screen surface Pay attention to the two points below when using the pen 1 When drawing using the pen hold it perpendicularly to the screen as much as possible and draw objects by pressing the tip of the pen against the screen to apply writing pressure When information is sent out correctly from the pen a faint operating sound can be heard Be aware that this is not a failure or malfunction 2 The tip of the
44. DISPLAY and press the gt or ENTER button to display the MY TEXT DISPLAY on off menu 4 RETURN EXIT 2 Use the A V buttons on the MY TEXT DISPLAY on off menu to select on or off MY TEXT ON OFF DISPLAY When it is set ON the MY TEXT will be displayed on the START UP screen and the INPUT _ INFORMATION when the INFORMATION on the INPUT INFORMATION SERVICE menu is chosen COMPUTER IN 1 e This function is available only when the MY TEXT FRAME LOCK PASSWORD function is set to the OFF ee em MY TEXT DISPLAY ON 4 RETURN EXIT 1 Use the A buttons on the SECURITY menu to select the MY RESAN TEXT WRITING and press the gt E button The MY TEXT WRITING dialog EJE FENEKE oR S TIUyv will be displayed a e eae ERLU NAY 2 The current MY TEXT will be displayed a on the first 3 lines If not yet written the E T E T lines will be blank Siama GE Use the A W lt gt buttons and the SEAT A ENTER or INPUT button to select and Projectorii ii1z3 enter characters To erase 1 character 7 E at one time press the RESET button or Ale c o fe IF Je aT La ik L WIN fal olals rlulv why 2 press the lt and INPUT button at the same time Also if you move the cursor a E to DELETE or ALL CLEAR on screen CHEO set MY TEXT and press the ENTER or INPUT button WRITING 1 character or all characters will be EL SECURITY_MY TEXT WRITING erased The MY TEXT can be input up Boo to 24 characters on each line a 3 To change
45. DMI Licensing LLC in the United States and other countries e Trademark PJLink is a trademark applied for trademark rights in o Japan the United States of America and other countries and areas F 3Link Blu ray Disc and Blu ray are trademarks of Blu ray Disc Association e StarBoard is a registered trademark of Hitachi Solutions Ltd in Japan and other countries All other trademarks are the properties of their respective owners aa Introduction 22 0000000 nue 3 FeatureS 0 000 ee eee 3 Checking the contents of package 3 Part nameS 000050 4 Setting up 00 82 ee eee 7 Arrangement T Connecting with your devices 9 Connecting to a power supply 14 Using the security bar and slot 15 Using the cable cover 16 Remote control 000 17 Installing the batteries 17 About the remote control signal 17 Changing the frequency of remote control signal 18 Using as a simple PC mouse amp keyboard 18 Interactive pen 22 20005 19 Power on off 2000005 20 Operating 2 00882 nena 22 Adjusting the volume 22 Temporarily muting the sound 22 Selecting an input signal 22 Searching an input signal 24 Selecting an aspect ratio 24 Adjusting the projector s elevator 25 Adjusting the zoom and focus 25 Using the automatic adjustment feature 26 Adjusting the positi
46. ENTER button ica a dialog to aid you in adjusting the mode SAMA cust This function is useful when you want to T change the brightness of particular tones Choose an item using the lt gt buttons and adjust the level using the A V buttons You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button Each time you press the ENTER button the pattern changes as below No pattern gt Gray scale of 9 steps tL Ramp Gray scale of 15 steps The eight equalizing bars correspond to eight tone levels of the test pattern Gray scale of 9 steps except the darkest in the left end If you want to adjust the 2nd tone from left end on the test pattern use the equalizing adjustment bar 1 The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar e Lines or other noise might appear on the 7 ae screen when this function is operated but it is not a malfunction continued on next page 35 ltem escription O O O O O Using the A buttons switches the color temperature mode 1HIGH amp 1CUSTOM 2MID 2CUSTOM g g 6 CUSTOM 3 LOW 2 2 6 Hi BRIGHT 3 3 CUSTOM 2 2 5 CUSTOM 5 Hi BRIGHT 2 amp 4 CUSTOM 4 Hi BRIGHT 1 To adjust CUSTOM Selecting a mode whose name includes See ae CUSTOM and then pressing the gt button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and
47. ENTER or INPUT button continued on next page 53 6 The current name will be displayed on the first line Use the A W lt gt buttons and the ENTER or INPUT button to select and enter characters To erase 1 character at one time press the RESET button or press the lt and INPUT button at the same time Also if you move the cursor to DELETE or ALL CLEAR on screen and press the ENTER or INPUT button 1 character or all characters will be erased The name can be a maximum SOURCE NAME of 16 characters Continued 7 To change an already inserted character press the A button to move the cursor to the first line and use the lt P buttons to move the cursor on the character to be changed After pressing the ENTER or INPUT button the character is selected Then follow the same procedure as described at the item 6 above 8 To finish entering text move the cursor to the OK on screen and press the gt ENTER or INPUT button To revert to the previous name without saving changes move the cursor to the CANCEL on screen and press the lt ENTER or INPUT button Using the A V cursor buttons switches the mode for the template screen Press the cursor or the ENTER button to display the selected template and press the lt cursor button to close the displayed screen The last selected template is displayed when the MY BUTTON allocated to the TEMPLATE function is pressed G60 TEMPLATE TEST PATTERN DOT LINE1 amp
48. EO CONTROL me 2 EBS Remote control VIDEO button 2123 COMPUTER button 123 SEARCH button L124 STANDBYION button 120 ASPECT button 4124 AUTO button 1126 BLANK button 129 MAGNIFY ON button 128 MAGNIFY OFF button 128 MY SOURCE DOC CAMERA button 2123 60 VOLUME button 422 PAGE UP button 218 PAGE DOWN button 218 VOLUME button 122 MUTE button 22 FREEZE button 2229 MY BUTTON 1 button 2259 MY BUTTON 2 button 2459 KEYSTONE button 27 FOCUS button 1126 FOCUS button 2126 N OOO ON ee es es ee IAN IAN IAA AeA NM NMNNN gt A O00 O10 NY o0 h AON OSN OS xn n N ee N NST NST NS NS ONGANOOOOAGU gt A NSS O N AN AN AAN aes rn A Aa IA QQ am Aaa Ae NNNNN Aaa aes aN OO RA Neer Ns Ne Ne NS Ss Se NA NSI D ZOOM button 425 D ZOOM button 125 POSITION button 127 31 MENU button 130 31 A lt cursor buttons 430 ENTER button 030 31 ESC button 130 Back of RESET button 2130 the remote control Battery cover 417 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Interactive pen Pen tip 19 3 SIDE BUTTON No 0 button 185 a SIDE BUTTON No 1 button 185 Battery cover L419
49. ERVICE item in OPTION menu M66 can reset all settings except settings such as LANGUAGE LAMP TIME FILTER TIME FILTER MESSAGE SECURITY and NETWORK to the factory default Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect check and cope with it according to the following table f Reference Phenomenon Cases not involving a machine defect The electrical power cord is not plugged in Correctly connect the power cord The main power source has been interrupted during operation such as by a power outage blackout etc Please disconnect the power plug from the power outlet and allow the projector to cool down at least 10 minutes then turn the power on again Power does not come on Either there is no lamp and or lamp cover or either of these has not been properly fixed Please turn the power off and disconnect the power plug from the power outlet and allow the projector to cool down at least 45 minutes After the projector has sufficiently cooled down please make confirmation of the attachment state of the lamp and lamp cover and then turn the power on again The signal cables are not correctly connected Correctly connect the connection cables Signal source does not correctly work Correctly set up the signal source device by referring to the manual of the source device Neither sounds nor pictures are outputted The BLANK function for picture
50. For product disposal consult your local government agency or www eiae org in the US or www epsc ca in Canada For more information call your dealer e If the lamp should break it will make a loud bang when it does unplug the power cord from the outlet and make sure to request a replacement lamp from your local dealer Note that shards of glass could damage the projector s internals or cause injury during handling Z so please do not try to clean the projector or replace the lamp yourself e If the lamp should break it will make a loud bang when it does ventilate the Disconnect room well and make sure not to inhale the gas or fine particles that come out the plug from the projector s vent holes and not to get them into your eyes or mouth eo e Before replacing the lamp turn the projector off and unplug the power outlet Cord then wait at least 45 minutes for the lamp to cool sufficiently Handling the lamp while hot can cause burns as well as damaging the lamp e Never unscrew except the appointed marked by an arrow screws e Do not open the lamp cover while the projector is mounted on a wall or ceiling This is dangerous since if the lamp s bulb has broken the shards will fall out when the cover is opened In addition working in high places is dangerous so ask your local dealer to have the lamp replaced even if the bulb is not broken e Do not use the projector with the lamp cover removed At the lamp replacing make
51. NS TEXT CAPTIONS Display Closed Caption TEXT Display Text data which is for additional information such as news reports or a TV program guide The information covers the entire screen Not all of the C C program has Text information CHANNEL Select Closed Caption CHANNEL from following options using A V buttons 18220304 Channel 1 primary channel language Channel 2 Channel 3 Channel 4 The channel data may vary depending on the content Some channel might be used for secondary language or empty I I IN 55 OON tanker From the OPTION menu items shown in the table E ADVANCED MENU G SELECT m INTERACTIVE AUTO SEARCH OFF below can be pe rfo rmed 0 PICTURE amp DIRECT POWERON OFF a A IMAGE amp AUTO POWER OFF Omin Select an item using the A V cursor buttons and a meut E USB TYPE B USB DISPLAY press the cursor button or ENTER button to execute EESO FILTERTIME Oh the item except for the items LAMP TIME and FILTER a MY SOURCE VIDEO TIME Then perform it according to the following table IMERSN as NETWORK Y SERVICE E EASY MENU EXIT COMPUTER IN 1 1280 x 800 60Hz ltem escription Using the A V buttons turns on off the automatic signal search function ON OFF When the ON is selected detecting no signal automatically cycles through input ports in the following order The search is started from AUTO SEARCH the current port Then when an input is found the pr
52. NSITION DETECTOR on off menu to select ON Select AOC O ON and the current angle and MIRROR ENTER NEW PASSWORD setting will be recorded The ENTER NEW 0000 PASSWORD box small will be displayed ENTER NEW PASSWORD 1 3 Use the A lt b buttons to enter a box small password Move the cursor to the right side of the ENTER NEW PASSWORD box small and press the gt button to display the NEW T TRANSITION DETECTOR T PASSWORD AGAIN box enter the same NEW PASSWORD AGAIN TRANSITION password again iene 1 4 Move the cursor to the right side of the DETECTOR NEW PASSWORD AGAIN box and press EAE the button to display the NOTE NEW PASSWORD box for about 30 seconds please make note of the password during this time Pressing the ENTER button on the remote control or the button on the projector will return to the TRANSITION DETECTOR on off menu e Please do not forget your TRANSITION DETECTOR password e This function will activate only when the projector is started after turning off the AC power e This feature may not function properly if the projector is not in a stable position when ON is selected 2 Turning off the TRANSITION DETECTOR 2 1 Follow the procedure in 1 1 to display the TRANSITION DETECTOR on off menu 2 2 Select OFF to display the ENTER PASSWORD box large Enter the registered gpmermymm D password and the screen will return to the ET TRANSITION DETECTOR on off menu Jnauiring Code 0123456789 __ If an incorrect password
53. OSITION to the default setting e When this function is performed on a video signal or an s video signal the range of this adjustment depends on OVER SCAN 438 setting It is not possible to adjust when OVER SCAN is set to 10 e This function is unavailable for a signal from the LAN USB TYPE A USB TYPE B or HDMI port continued on next page 39 ltem escription O Using the 4 gt buttons adjusts the horizontal phase to eliminate flicker Right Left H PHASE e This item can be selected only for a computer signal or a component video signal This function is unavailable for a signal from the LAN USB TYPE A USB TYPE B or HDMI port Using the lt gt buttons adjusts the horizontal size Small Large e This item can be selected only for a computer signal This function is unavailable for a signal from the LAN USB TYPE A USB TYPE B or HDMI port e When this adjustment is excessive the picture may not be displayed correctly In such a case please reset the adjustment by pressing the RESET button on the remote control during this operation e Images might appear degraded when this function is operated but it is not a malfunction Selecting this item performs the automatic adjustment feature For a computer signal The vertical position the horizontal position and the horizontal phase will be automatically adjusted Make sure that the application window is set to its maximum size prior to at
54. Projector BZ 1 User s Manual detailed Operating Guide Type nos BZ 1 BZ 1M Thank you for purchasing this projector ANNOU SO MEMVEN Various symbols are used in this manual The meanings of these symbols are described below AWARNING This symbol indicates information that if ignored could possibly result in personal injury or even death due to incorrect handling ACAUTION This symbol indicates information that if ignored could possibly result in personal injury or physical damage due to incorrect handling NOTICE This entry notices of fear of causing trouble Q Please refer to the pages written following this symbol NOTE The information in this manual is subject to change without notice e The illustrations in this manual are for illustrative purposes They may differ slightly from your projector e The manufacturer assumes no responsibility for any errors that may appear in this manual e The reproduction transfer or copy of all or any part of this document is not permitted without express written consent Trademark acknowledgment e Mac is a registered trademark of Apple Inc e Windows DirectX DirectDraw and Direct3D are registered trademarks of Microsoft Corporation in the U S and or other countries e VESA and DDC are trademarks of the Video Electronics Standard Association e HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of H
55. RO3 LY 3 Attach the battery cover by turning it to the right until it is completely closed Exchanging the tip of the pen When the tip of the pen is shortened due to wearing ay tip of exchange it according to the following procedure age 1 Remove the tip of the pen referring to the illustration 2 l Fit a new tip into the place and push it so that it r clicks AWARNING p Always handle the batteries with care and use them only as directed Improper use may result in battery explosion cracking or leakage which could result in fire injury and or pollution of the surrounding environment e Be sure to use only the batteries specified e Do not hold a battery with tweezers or the like e Make sure the plus and minus terminals are correctly aligned when loading a battery e Keep a battery away from children and pets e Do not recharge short circuit solder or disassemble a battery e Do not place a battery in a fire or water Keep batteries in a dark cool and dry place e If you observe battery leakage wipe out the leakage and then replace a battery lf the leakage adheres to your body or clothes rinse well with water immediately e Obey the local laws on disposing the battery e Keep the tip of the pen away from children and pets Exercise care to prevent them from swallowing the tip of the pen or the pack of spare accidentally If swallowed consult a physician immediately for emergency treatment ACAUTION PDo not dro
56. The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector 1 In the INPUT menu select the RESOLUTION using the A V buttons and press the gt button TEER The RESOLUTION menu will be displayed i STANDARD 1024 x 768 2 In the RESOLUTION menu select the 3 arpi e Fe E E e H to display using z STANDARD 1960 x 768 the 1366 x Selecting AUTO will set a resolution acne acini i i i RETURN appropriate to the input signal 3 Pressing the gt or ENTER button when selecting a STANDARD resolution will automatically adjust the horizontal and vertical positions clock phase and STANDARD horizontal size Dy COMPUTER IN 1 The INPUT_INFORMATION dialog will be displayed 4 To set a custom resolution use the A V buttons to select RESOLUTION the CUSTOM and the RESOLUTION CUSTOM box will be displayed Set the horizontal HORZ and E vertical VERT resolutions using AE the A gt buttons HORZ VERT This function may not support all EA resolutions 5 Move the cursor to OK on screen and press the gt or ENTER button The message ARE YOU SURE YOU WISH TO CHANGE RESOLUTION appears To save the setting press the gt button The horizontal and vertical positions clock phase and horizontal size will be automatically adjusted The INPUT_INFORMATION dialog will be displayed 6 To revert back to the previous resolution without saving changes move the cursor to
57. UME buttons to adjust the volume A dialog will appear on the screen to aid you in adjusting the volume If you do not do anything the dialog will automatically disappear after a few seconds e When X is selected for current picture input port the volume adjustment is disabled Please see AUDIO SOURCE item of AUDIO menu 448 e Even if the projector is in the standby mode the volume is adjustable when both of the following conditions are true An option other than X is selected for STANDBY in the AUDIO SOURCE item of the AUDIO menu 448 NORMAL is selected in the STANDBY MODE item of the SETUP menu E147 e In the standby mode the volume of the microphone is adjustable with the VOLUME buttons on the remote control in synchronization with the volume of the projector 4112 Temporarily muting the sound biel lala Press MUTE button on the remote control A dialog will appear on the screen indicating that you have muted the sound To restore the sound press the MUTE VOLUME or VOLUME button Even if you do not do anything the dialog will automatically disappear after a few seconds e When X is selected for current picture input port the sound is always muted Please see AUDIO SOURCE item of AUDIO menu 448 e C C Closed Caption is automatically activated when sound is muted and an input signal containing C C is received This function is available only when the signal i
58. W PASSWORD AGAIN box and then enter the same password again 1 4 Move the cursor to the right side of the 0 RETURN EXIT E MY TEXT PASSWORD NEW PASSWORD AGAIN MY TEXT NEW PASSWORD AGAIN box and press aor PASSWORD gt button to display the NOTE NEW PASSWORD box for about 30 seconds then GMRS please make note of the password during IBIS SSS UERD this time spree Pressing the ENTER button on the remote control or button on the projector will return to the MY TEXT PASSWORD on off menu 2 Turning off the MY TEXT PASSWORD 2 1 Follow the procedure in 1 1 to display the MY TEXT PASSWORD on off menu 2 2 Select OFF to display the ENTER PASSWORD box large Enter the TEE registered password and the screen will Inquiring Code 01 23456789 __ return to the MY TEXT PASSWORD on off seo menu ENTER PASSWORD box If an incorrect password is input the menu will close large If necessary repeat the process from 2 1 3 If you have forgotten your password 3 1 Follow the procedure in 1 1 to display the MY TEXT PASSWORD on off menu 3 2 Select OFF to display the ENTER PASSWORD box large The 10 digit inquiring code will be displayed inside the box 3 3 Contact your dealer with the 10 digit inquiring code Your password will be sent after your user registration information is confirmed continued on next page 78 ltem scription OO O O 1 Use the A V buttons on the SECURITY menu to select the MY TEXT
59. able mode for computer signals 0 255 e If the contrast of the screen image is too strong or too weak try finding a more suitable mode HDMI RANGE continued on next page 42 ltem escription O O O The computer input signal type for COMPUTER IN1 and IN2 ports can be set 1 Use the A buttons to select the COMPUTER IN port to be set 2 Use the lt P gt buttons to select RHER the computer input signal type SHS COMPUTER IN 1 O AUTO SYNC ON G OFF COMPUTER IN 2 COMPUTER IN Selecting the AUTO mode allows you to input a sync on G signal or component video signal from the port Please refer to Technical for the connection of component video input to COMPUTER IN1 2 port e In the AUTO mode the picture may be distorted with certain input signals In such a case remove the signal connector so that no signal is received and select the SYNC ON G OFF and then reconnect the signal 0 EXIT Set the frame lock function on off for each port 1 Use the A buttons to select the input ports FRAME LOCK 2 Use the lt gt buttons to turn the COMPUTER IN 1 COMPUTER IN 2 FRAME LOCK frame lock function on off HOM ON amp OFF e This item can be performed only on a signal with a vertical frequency of 49 to 51Hz 59 to 61 Hz e When ON is selected moving pictures are displayed more smoothly continued on next page 43 ltem escription O O O O
60. ail screen You can also control the images by using the menu on the Thumbnail screen ltem Functions Moves to an upper folder Allows you to sort files and folders as following RETURN ie gt cursor button or ENTER to return to the Thumbnail 7 RETURN S gt cursor button or ENTER to return to the Thumbnail Be sure to use this function before removing USB storage device from the projector After that the projector will not recognize a USB storage device until you insert it again into the USB TYPE A input port Ss REMOVE USB tal SORT 90 PC LESS Presentation continued NOTE These operations are not accessible while the projector OSD is displayed e The Thumbnail mode shows 20 pictures in 1 page as maximum e It is not possible to change the input port by using the INPUT button when the Thumbnail screen Slideshow or Full Screen is displayed e Some error icons will be displayed in the Thumbnail This file seems to be broken or not supported format A file that cannot be displayed on the thumbnail screen is indicated by a file format icon 91 PC LESS Presentation continued Full Screen Mode The Full Screen mode shows a full display image To display in Full Screen mode select an image in the Thumbnail screen Then press the ENTER button on the remote control or the INPUT button on the keypad or click ENTER on the Web Remote Control Full screen display a ee M
61. an already inserted afele lole telafi ln lale fe tulvil character press the A button to feebPll hirL beet LLL move the cursor to one of the first 3 cance lt a lines and use the lt P gt buttons to Re Oe EEE move the cursor on the character to be changed After pressing the ENTER or INPUT button the character is selected Then follow the same procedure as described at the item 2 above 4 To finish entering text move the cursor to the OK on screen and press the gt ENTER or INPUT button To revert to the previous MY TEXT without saving changes move the cursor to the CANCEL on screen and press the lt ENTER or INPUT button e The MY TEXT WRITING function is available only when the MY TEXT PASSWORD function is set to OFF 79 mAMeksxey an eldoln Oe ks The projector has the following three convenient tools that enable on screen presentations easily and quickly Interactive Function below PC LESS Presentation 487 USB Display 296 Interactive Function USB cable PR e 5 USB Driver StarBoard Software Interactive Function enables interactive operations such as operation of the connected computer and writing on the screen using the StarBoard Software by making use of the built in sensor of the projector and the supplied pen without the need of a special board System requirements Hardware and software requirement for computer v CPU Pentium 4 1 8 GHz or higher v Memory 5
62. ch time you press the button the projector switches its input port from the current port as below HDMI gt S VIDEO VIDEO a e While ON is selected for AUTO SEARCH item in OPTION menu the projector will keep checking every port sequentially till an input signal is detected 156 If VIDEO button is pressed when COMPUTER IN1 COMPUTER IN2 LAN USB TYPE A or USB TYPE B port is selected the projector will check HDMI port first 4 Press the MY SOURCE DOC CAMERA button on MY SOURCE the remote control The input signal will be changed DOC CAMERA button into the signal you set as MY SOURCE 460 e This function also can use for document camera Select the input port that connected the document camera 23 Searching an input signal 4 Press SEARCH button on the remote control SEARCH button The projector will start to check its input ports as below in order to find any input signals When an input is found the projector will stop searching and display the image If no signal is found the projector will return to the state selected before the operation m gt COMPUTER IN1 gt COMPUTER IN2 VIDEO LAN A NV S VIDEO USB TYPE A A HDM lt USBTYPEB lt e While ON is selected for AUTO SEARCH item in OPTION menu M56 the projector will keep checking the ports in above order repeatedly till an input signal is detected e t may take seve
63. cting parts 1 Connect the signal cables and the power cord to the projector first 2 Combine parts as shown in figure and assemble the cable cover Insert the three knobs on the cable cover into the three holes on the projector as shown in the figure Pass the cables through the holes on the bottom of the cable cover Remote Control Installing the batteries Please insert the batteries into the remote control before using it If the remote control starts to malfunction try to replace the batteries If you will not use the remote control for long period remove the batteries from the remote control and store them in a safe place 1 Holding the hook part of the battery cover remove it 2 Align and insert the two AA batteries HITACHI MAXELL or HITACHI MAXELL ENERGY Part No LR6 or R6P according to their plus and minus terminals as indicated in the remote control 3 Replace the battery cover in the direction of the arrow and snap it back into place AWARNING P Always handle the batteries with care and use them only as directed Improper use may result in battery explosion cracking or leakage which could result in fire injury and or pollution of the surrounding environment e Be sure to use only the batteries specified Do not use batteries of different types at the same time Do not mix a new battery with used one e Make sure the plus and minus terminals are correctly aligned when loading a battery e Keep a batte
64. d soiled or fogged it could cause deterioration of display quality Please take care of the mirror and lens being cautious of handling 4 Turn the projector off and unplug the power cord from the power outlet And cool the projector down by leaving it for a while as it is 2 The lens door can be opened manually Please hold both side of the lens door and slowly open it until it is locked with clicking sound 3 Use an air blower to blow away dust on the lens and on the mirror before wiping Wipe softly the mirror and lens with a damped soft cleaning cloth for lens on the market being careful not to give any damage on the mirror and lens 4 To close the lens door properly please take the following procedure 1 Insert the power cord with the lens door opened 2 The power indicator will light in orange and the lens door closes automatically Do not touch the lens door when the door is closing Do not allow anything to obstruct the lens door NOTE When the lens door is closed manually it may not shut properly e The lens door may not close when the LENS DOOR LOCK function of the SERVICE item in the OPTION menu is set to ON Refer to the LENS DOOR LOCK function of the SERVICE item in the OPTION menu M62 Other care Inside of the projector In order to ensure the safe use of your projector please have it cleaned and inspected by your dealer about once every year Caring for the cabinet and remot
65. e character to be changed After pressing the ENTER or INPUT button the character is selected Then follow the same procedure as described at the item 2 above 4 To finish entering text move the cursor to the OK on screen and press the gt ENTER or INPUT button To revert to the previous PROJECTOR NAME without saving changes move the cursor to the CANCEL on screen and press the lt ENTER or INPUT button continued on next page 69 pttem escription Selecting this item displays the MY E MY IMAGE IMAGE menu TE PRESENTATIONFILE To store images in the projector the mo er as application software PJImg Projector OY Image Tool that can be downloaded from our website is required Use the A V buttons to select an item which is a still image by the MY IMAGE My Image Function in the User s manual Network Guide and the gt or ENTER button to display the image e The item without image stored cannot be selected e The image names are each displayed in 16 characters or less MY IMAGE To switch the image displayed Use the A V buttons To return to the menu Press the lt button on the remote control To erase the image displayed and its source file in the projector 1 Press the RESET button on the remote control while displaying an MY IMAGE image to display the MY IMAGE DELETE IMAGE 1 DELETE menu 2 Press the gt button to perform to erase To stop erasing press the lt button U
66. e control Incorrect care could have adverse influence such as discoloration peeling paint etc 1 Turn the projector off and unplug the power cord Allow the projector to cool sufficiently 2 After making sure that the projector is cool adequately lightly wipe with gauze or a soft cloth If the projector is extremely dirty dip soft cloth in water or a neutral cleaner diluted in water and wipe lightly after wringing well Then wipe lightly with a soft dry cloth Maintenance of the pen sensor s horns When dust accumulates on the two horns of the pen sensor the pen may malfunction or it may not function at all Check the horns of the pen sensor and remove any dust accumulated on them using a vacuum cleaner BEN SEnsor 1 Turn the projector off and unplug the power cord Allow the projector to cool sufficiently Make sure that the lens door is closed before cleaning 2 Ensure that the projector is cooled down before removing dust accumulated on the pen sensor s horns using a vacuum cleaner During cleaning do not hit the vacuum cleaner s nozzle against the projector and the pen sensor s horns with force or rub it against them Doing so may damage the projector and pen sensor or cause them to malfunction Maintenance of the pen Wipe lightly with a soft dry cloth continued on next page 107 Other care continued AWARNING P Before caring make sure the power cord is not plugged in and then allow the
67. e lamp please replace the air filter An air filter of specified type will come together with a replacement lamp for this projector 4 Turn the projector off and unplug the power cord Allow the projector to sufficiently cool down Use a vacuum cleaner on and around the filter cover Slide the filter unit upward to take it off from the projector Use a vacuum cleaner for the filter vent of the oe YP projector Intake vent Take the fine meshed filter out while holding the Filter unit Une re filter cover It is recommended to leave the coarse 7 oreo meshed filter in the filter cover as it is Use a vacuum cleaner on both sides of the fine meshed filter while holding it so it will not be sucked in Use a vacuum cleaner for the inside of the filter i cover to clean up the coarse meshed filter If the Filter filters are damaged or heavily soiled replace them coarse meshed with new ones Filter fine meshed 7 Put the fine meshed filter on the coarse meshed one SOE Stitched turning its stitched side up SS side 1 8 Put the filter unit back into the projector continued on next page 103 Cleaning and replacing the air filter continued 9 Turn the projector on and reset the filter time using the FILTER TIME item in the EASY MENU 1 Press the MENU button to display a menu 2 Point at the FILTER TIME using the W A button then press the gt button
68. ed Make sure that the area between the sensor at the top surface of the projector and the screen is not obstructed transparent and meshed objects are also not allowed For example the Interactive Function does not function if the projector is enclosed with only the lens exposed such as when a casing for theft prevention is used Is dust accumulated on the two horns of the pen sensor Check the horns of the pen sensor and remove any dust accumulated on them using a vacuum cleaner Is the volume from the speaker of the projector too loud Loud volume may affect the operation of the pen depending on the environment where it is used Try lowering the volume Other than those above Restart Windows and StarBoard Software 118 continued on next page Phenomena that may be easy to be mistaken for machine defects continued A f Reference Phenomenon Cases not involving a machine defect sone Pen action is unstable or pen stops operating Lines cannot be drawn properly or are broken The tip of the pen does not coincide with the pen cursor Is the power supply for the projector used at the same time for other electrical products that require a measurable amount of power Use a separate power supply for other electrical products with a high power consumption Is dust accumulated on the two horns of the pen sensor Check the horns of the pen sensor and remove any dust 107 accumulated on them using a
69. ed on next page 41 ltem scription O The video format for S VIDEO port and VIDEO port can be set 1 Use the A buttons to select the input port VIDEO FORMAT NTSC 2 Using the lt gt buttons AUTO NTSC PAL SECAM 45 MPAL N PAL S VIDEO O O switches the mode for video W X O format VIDEO FORMAT AUTO amp NTSC PAL SECAM N PAL amp M PAL NTSC4 43 lt t e This item is performed only for a video signal from the VIDEO port or the S VIDEO port e The AUTO mode automatically selects the optimum mode e The AUTO operation may not work well for some signals If the picture becomes unstable e g an irregular picture lack of color please select the mode according to the input signal Using the A V cursor buttons switches the video format for an input from the HDMI port AUTO VIDEO COMPUTER Co e Feature HDMI FORMAT AUTO automatically sets the optimum mode VIDEO sets the suitable mode for DVD signals COMPUTER sets the suitable mode for computer signals e When the COMPUTER is selected the functions COLOR PICTURE menu TINT PICTURE menu and OVER SCAN IMAGE menu are unavailable Using the A V cursor buttons changes the digital range for input from the HDMI port AUTO amp NORMAL ENHANCED te eee Feature AUTO automatically sets the optimum mode NORMAL sets the suitable mode for DVD signals 16 235 ENHANCED sets the suit
70. een may cause serious distortion of a projected image A hard screen such as a board screen is recommended for use with this projector A high gain screen such as a bead screen that has narrow viewing angle is not suitable for this projector A low gain screen around 1 0 such as a matte screen that has wide viewing angle is recommended for use with this projector A screen with a weave pattern may cause moire on the projected image which is not a failure of the projector A screen that has less moir effects is recommended for use with this projector NOTE The projector may make a rattling sound when tilted moved or shaken since a flap to control the air flow inside of the projector has moved Be aware that this is not a failure or malfunction continued on next page Arrangement continued AWARNING P Place the projector in a cool place and ensure that there is sufficient ventilation The high temperature of the projector could cause fire burns and or malfunction of the projector e Do not stop up block or otherwise cover the projector s vents e Keep a space of 30 cm or more between the sides of the projector and other objects such as walls e Do not place or attach anything that would block the lens or vent holes e Do not place the projector on metallic thing or anything weak in heat e Do not place the projector on carpet cushions or bedding e Do not place the projector in direct sunlight or near hot objects suc
71. elect OFF to disable the MONITOR OUT fe port for the input port or standby mode a chosen in the step 1 e You cannot select COMPUTER IN1 in step 1 and COMPUTER IN2 in step 2 and vice versa Using A V buttons switches the standby mode setting between NORMAL and SAVING NORMAL amp SAVING When SAVING is selected the power consumption in the standby mode is lowered with some functional restriction as below e When SAVING is selected the RS 232C communication control except to turn the projector on and the network function are disabled STANDBY MODE while the projector is in the standby mode If the COMMUNICATION TYPE in the COMMUNICATION menu is set to NETWORK BRIDGE all of the RS 232C commands are disabled 464 e When SAVING is selected STANDBY setting of AUDIO SOURCE 448 is invalid and no signal is output from AUDIO OUT port in the standby mode e When SAVING is selected STANDBY setting of MONITOR OUT i S H OR TOROROROR ORO MEO iam O O000008 NX ojoooo0oo0000 47 NO D KO inner From the AUDIO menu items shown in the table ee Osby a A i below can be performed Select an item using the A PICTURE SPEAKER A V cursor buttons and press the cursor button R HDMI AUDIO 4 SETUP f MIC LEVEL or the ENTER button to execute the item Then te MIC VOLUME SCREEN perform it according to the following table OPTION as NETWORK SECURITY E EASY MENU EXIT COMPUTER IN 1 1280 x 8
72. em Then perform it according to the ae O following table E EASY MENU EXIT COMPUTER IN 1 1280 x 800 60Hz ltem escription Using the A V buttons switches the progress mode TV FILM amp OFF ee e This function works only for a video signal s video signal component video signal of 480i 60 or 576i 50 or 1080i 50 60 and an HDMI PROGRESSIVE signal of 480i 60 or 576i 50 or 1080i 50 60 e When TV or FILM is selected the screen image will be sharp FILM adapts to the 2 3 Pull Down conversion system But these may cause a certain defect for example jagged line of the picture for a quick moving object In such a case please select OFF even though the screen image may lose sharpness Using the A V buttons switches the noise reduction mode HIGH MID LOW ee VIDEO NR e This function works only for a video signal s video signal compo nent video signal of 480i 60 or 576i 50 or 1080i 50 60 and an HDMI signal of 480i 60 or 576i 50 or 1080i 50 60 Using the A V buttons switches the mode for color space AUTO RGB SMPTE240 REC709 REC601 e FG e This item can be selected only for a computer signal except for COLOR SPACE signals from the LAN USB TYPE A and USB TYPE B ports or a component video signal e The AUTO mode automatically selects the optimum mode e The AUTO operation may not work well at some signals In such a case it might be good to select a suitable mode except AUTO continu
73. essing the POSITION button e Some functions cannot be performed when a certain input port is selected or when a certain input signal is displayed e When you want to reset the operation press RESET button on the remote control during the operation Note that some items ex LANGUAGE VOLUME cannot be reset e In the ADVANCED MENU when you want to return to the previous display press the lt cursor button or ESC button on the remote control Indication in OSD On Screen Display BRIGHTNESS D 24 MY MEMORY _LOAD 4 RETURN FILTER TIME TEMPORARY CONDITION A RESET ARE YOU SURE VY EXIT YOU WISH TO LOAD EXIT YES The meanings of the general words on the OSD are as follows EXIT Selecting this word finishes the OSD menu It s the same as pressing the MENU button RETURN Selecting this word returns the menu to the previous menu CANCEL or NO Selecting this word cancels the operation in the present menu and returns to the previous menu OK or YES Selecting this word executes the prepared function or shifts the menu to the next menu 31 JASMENO From the EASY MENU items shown in the table SE E TTEN O below can be performed ASPECT NORMAL Select an item using the A V cursor buttons Then asia ppl perform it according to the following table S KEYSTONE e PICTURE MODE NORMAL ECO MODE NORMAL MIRROR NORMAL 4 RESET EXECUTE FILTER TIME LANGUAGE ADVANCED MENU EXIT COMPUTER IN 1 0
74. etwork Use the A V buttons to enter the TIME DIFFERENCE Set the same TIME DIFFERENCE as the one KYE set on your computer If unsure consult your IT DIFFERENCE y y manager Use the button to return to the menu after setting the TIME DIFFERENCE Use the A gt buttons to enter the Year last two digits Month Date Hour and Minute DATE AND The projector will override this setting and retrieve TIME DATE AND TIME information from the Time server when SNTP is enabled EJ Date Time Settings in the User s Manual Network Guide continued on next page 68 1 Use the A F buttons on the NETWORK menu to select the PROJECTOR NAME and press the gt button The PROJECTOR NAME dialog will be displayed 2 The current PROJECTOR NAME will be displayed on the first 3 lines Particular projector name is pre assigned by default Use the A W lt gt buttons and the ENTER or INPUT button to select and enter characters To erase 1 character at one time press the RESET button or press the lt and INPUT button at the same time Also if you move the cursor to DELETE or ALL CLEAR on screen and push the ENTER or INPUT button 1 character or all characters will be erased The PROJECTOR NAME can be sll up to 64 PROJECTOR characters OENE NAME 3 To change an already inserted character press the A V button to move the cursor to one of the first 3 lines and use the lt P gt buttons to move the cursor on th
75. ff when choose restart If DHCP is selected on IP address may be changed After selecting RESTART EXECUTE NETWORK menu may not be controlled approx 30 seconds T3 S C U R Wy Menu ADVANCED MENU SELECT m INTERACTIVE ENTER PASSWORD This projector is equipped with security functions ee From the SECURITY menu items shown in the table ee below can be performed pie To use SECURITY menu User registration is required SE before using the security functions SESA Enter to the SECURITY menu EXIT COMPUTER IN 1280 x 800 60Hz 1 Press the button The ENTER PASSWORD box will be displayed 2 Use the A W lt gt buttons to enter the registered password The SECURITY G factory default password is 4715 This password can be changed ENTER PASSWORD below Move the cursor to the right side of the ENTER 0000 PASSWORD box and press the gt button to display the SECURITY menu Y SECURITY e It is strongly recommended the factory default password to be BE MyScroen PASSYORD changed as soon as possible an eE e If an incorrect password is input the ENTER PASSWORD box SEs will be displayed again If incorrect password is input 3 times the E MY TEXT WRITING projector will turn off Afterwards the projector will turn off every time Asie an incorrect password is input 3 Items shown in the table below can be performed If you have forgotten your password 1 While the ENTER PASSWORD box is displayed press and hold SECURITY
76. functions are not used If the KEYSTONE or PERFECT FIT function is used the position of the pen may not be reflected correctly Calibration on the screen or pen operation may not yield any response of the pen even on the 60 100 sized screen position cannot be performed correctly The StarBoard Software files may be corrupted or installation may not have completed successfully Uninstall the StarBoard Software and reinstall it Is a part of the image enlarged using the Magnify function Press the MAGNIFY OFF key on the remote control to restore the normal display Is ASPECT set to NATIVE and the display resolution of the computer larger than 1280 x 800 38 Set ASPECT to NORMAL or set the display resolution of the computer to lower than 1280 x 800 You cannot exit ls USB TYPE B in the OPTION menu set to USB from the I PEN2 DISPLAY calibration Change the setting of USB TYPE B to MOUSE display even if you press the ESC button of the remote control 120 Phenomena that may be easy to be mistaken for machine defects continued Cases not involving a machine defect sha The interactive pen stops working The interactive pen or system does not work properly or intermittently works The mouse cursor or drawing image does not match with the actual pen tip point The LiveViewer Software and Starboard Software may work at the same time Calibrate again to optimize the interactive system
77. g device e g track ball like a laptop Computer open BIOS setup menu then select the external mouse and disable the built in pointing device because the built in pointing device may have priority to this function e Windows 95 OSR 2 1 or higher is required for this function And also this function may not work depending on the computer s configurations and mouse drivers This function can work with the computer which can operate general USB mouse or keyboard e You cannot do things like press two buttons at once for instance pressing two buttons at the same time to move the mouse pointer diagonally e This function is activated only when the projector is working properly This function is not available in any of the following cases While the lamp is warming up The POWER indicator blinks in green When either USB TYPE A or USB TYPE B port is selected While displaying BLANK 2129 TEMPLATE 54 or MY IMAGE L170 screen When any menu is displayed on the screen While using the cursor buttons to operate the sound or screen functions such as adjusting the sound volume correcting the keystone correcting the picture position and magnifying the screen MECANO Installing the battery 1 Turn the battery cover of the pen to the left to open it 2 As illustrated in the diagram insert the AAA battery into the battery cover with the end facing the front _ Wy HITACHI MAXELL or HITACHI MAXELL ENERGY Part No L
78. h as heaters Do not place the projector where the air from an air conditioner or similar unit will blow on it directly e Do not place anything near the projector lens or vents or on top of the projector e Do not place anything that may be sucked into or stick to the vents on the bottom of the projector This projector has some intake vents also on the bottom gt Do not place the projector anyplace where it may get wet Getting the projector wet or inserting liquid into the projector could cause fire electric shock and or malfunction of the projector e Do not place the projector in a bathroom or the outdoors e Do not place anything containing liquid near the projector e Do not place the projector where any oils such as cooking or machine oil are used gt Use only the mounting accessories the manufacturer specified and leave installing and removing the projector with the mounting accessories to the service personnel e Read and keep the user s manual of the mounting accessories used ACAUTION P Avoid placing the projector in smoky humid or dusty place Placing the projector in such places could cause fire electric shock and or malfunction of the projector e Do not place the projector near humidifiers smoking spaces or a kitchen Also do not use an ultrasonic humidifier near the projector Otherwise chlorine and minerals contained in tap water are atomized and could be deposited in the projector causing image degradatio
79. hat the projector sends data to While waiting the response the projector does not send out any data from the CONTROL port e This menu is available only when the NETWORK BRIDGE is selected for the COMMUNICATION TYPE and the HALF DUPLEX is selected for the TRANSMISSION METHOD M64 e OFF is selected as the default setting continued continued continued on next page 65 pttem escription INFORMATION Selecting this item displays a dialog titled INPUT_INFORMATION It shows the information about the current input INPUT _ INFORMATION T INPUT _INFORMATION T INPUT _INFORMATION COMPUTER IN 1 S VIDEO COMPUTER IN 1 1024 x 768 60Hz PAL 1080i 60Hz FRAME LOCK AUTO 4 RETURN XEXIT 4 RETURN O EXIT 4 RETURN EXIT e The FRAME LOCK message on the dialog means the frame lock function is working SERVICE e This item can t be selected for no signal and sync out continued e When the MY TEXT DISPLAY is set to ON the MY TEXT is displayed together with the input information in the INPUT _ INFORMATION box 179 FACTORY RESET Selecting OK using the button performs this function By this function all the items in all of menus will collectively return to the initial setting Note that the items LAMP TIME FILTER TIME LANGUAGE FILTER MESSAGE NETWORK and SECURITY settings are not reset CANCEL gt OK 66 NEMWORK menu Remember that incorrect network settings on this 0 Cee amp
80. he A V buttons to adjust the distortion of the top or bottom side after defining the lt RETURN adjusting position with the lt gt buttons Use the lt gt buttons to adjust the distortion of the left or right side after defining the adjusting position with the A V buttons 3 To adjust another corner or side follow the same procedure from 1 above To reset the adjustment of all the corners and sides select RESET with the A W lt b buttons and press the ENTER or PERFECT FIT INPUT button e While the distortion is adjusted with the PERFECT FIT function keystone adjustment feature is unavailable To correct the keystone distortion reset the adjustment of all the corners and sides e When the amount of correction is increased using the PERFECT FIT function the Interactive Function may not function properly particularly if the side correction amount is very large e The adjustable range of this correction will vary among inputs For some input this function may not work well e One adjustment position common to the top and bottom sides can be set Also another adjustment position common to the left and right sides can be set e The distortion of the top and bottom sides can be adjusted only in the same direction pincushion or barrel The adjustment for the left and right sides is carried out in the same manner e This function will be unavailable when the Transition Detector is on 077 Using the A V button
81. he holder 5 Replace the battery with a new HITACHI MAXELL or HITACHI MAXELL ENERGY Part No CR2032 or CR2032H Slide the battery in under the plastic claw and push it into the holder until it clicks 6 Replace the battery cover in place then turn it in the direction indicated CLOSE using such as coins to fix AWARNING P Be careful of handling a battery as a battery can cause explosion cracking or leakage which could result in a fire an injury and environment pollution e Use only the specified and perfect battery Do not use a battery with damage such as a scratch a dent rust or leakage e When replacing the battery replace it with a new battery e When a battery leaked wipe the leakage out well with a waste cloth If the leakage adhered to your body immediately rinse it well with water When a battery leaked in the battery holder replace the batteries after wiping the leakage out e Make sure the plus and minus terminals are correctly aligned when loading a battery e Do not work on a battery for example recharging or soldering e Keep a battery in a dark cool and dry place Never expose a battery to a fire or water e Keep a battery away from children and pets Be careful for them not to swallow a battery If swallowed consult a physician immediately for emergency treatment e Obey the local laws on disposing a battery 105 Caring for the mirror and lens If the projection mirror or lens is flawe
82. he reach of children e Never touch a lens door or mirror If the mirror is broken the projected image will be distorted Close the lens door and contact your dealer When the LENS DOOR LOCK is set to ON and the lens door is not open completely for some reason the image may shift or have keystone distortion In that case use the LENS DOOR OPEN function below to open the lens door completely LENS DOOR OPEN Use the LENS DOOR OPEN function to open the lens door if not open completely for some reason such as cleaning LENS DOOR CLOSE Use the LENS DOOR CLOSE function to temporarily close the lens door when LENS DOOR LOCK is set to ON Note that the lamp will be turned off when the lens door is closed Press the STANDBY ON button on the projector or the remote control to open the lens door and start the projector again continued on next page 62 ltem escription O O REMOTE FREQ 1 Use the A V button to change the projector s remote sensor frequency setting 44 18 1 NORMAL 2 HIGH 2 Use the lt b gt button to change the projector s remote sensor on or off ON amp OFF The factory default setting is for both 1 NORMAL and 2 HIGH to be on If the remote control does not function correctly disable either of them It s not possible to disable both options at the same time Selecting this item displays COMMUNICATION menu In this menu you can configure the serial communication settings of the projector
83. he remote EEGs TIME DIFFERENCE control to perform the item amp DATE AND TIME Q RETURN Use the A V buttons to turn DHCP on off ON OFF Select OFF when the network does not have DHCP DHCP enabled E AEA e When the DHCP setting changes to ON it Protocol takes a little time to obtain IP address from DHCP server e Auto IP function will be assigned an IP address if the projector could not obtain an IP address from server even if DHCP is ON continued on next page 67 Description Use the A W lt P buttons to enter the IP ADDRESS This function can only be used when DHCP is set to OFF IP ADDRESS The IP ADDRESS is the number that identifies this projector on the network You cannot have two devices with the same IP ADDRESS on the same network e The IP ADDRESS 0 0 0 0 is prohibited Use the A W lt buttons to enter the same SUBNET MASK used by your computer SUBNET This function can only be used when DHCP is set MASK to OFF e The SUBNET MASK 0 0 0 0 is prohibited Use the A W lt gt buttons to enter the DEFAULT GATEWAY a node on a computer network that DEFAULT serves as an access point to another network GATEWAY _ address aa This function can only be used when DHCP is set continued to OFF Use the A W lt gt buttons to input the DNS server address PNS SERVER The DNS server is a system to control domain names and IP addresses on the N
84. hem to the projector The LiveViewer Lite for USB has two options that have different compression rate of JPEG data Transmission speed Speed takes priority over Image quality lt makes JPEG compression rate higher The screen on the projector is rewritten quicker because the transferred data is smaller but the image quality is worse Image quality Image quality takes priority over Speed It makes JPEG compression rate lower The screen on the projector is rewritten slower because the transferred data is larger but the image quality is better Keep PC resolution If you remove the check mark from the Keep PC resolution box the screen resolution of your computer will be switched as follows and the display speed may be faster BZ 1 BZ 1M 1280 x 800 lf your computer does not support the display resolution specified above a smaller resolution that is the largest among the resolutions that are supported by the computer will be selected NOTE When the resolution is changed the arrangement of icons on computer desktop screen may be changed 99 USB Display continued Display LiveViewer Lite for USB If you want to display the LiveViewer application window on the screen please check the box NOTE Please check this box when you use Starboard Software with BZ 1 BZ 1M The annotation layer may not display on the projector image when this option is OFF About The version information of the LiveViewer Lite for USB
85. hen inserting or removing a USB device 412 90 Supported format e FAT12 FAT16 and FAT32 NOTE NTFS is not supported Supported file format e JPEG jpeg jog Progressive is not supported e Bitmap bmp 16bit mode and compressed bitmap is not supported e PNG png Interlace PNG is not supported e GIF gif NOTE Files with a resolution greater than XGA are not supported e Files with a resolution smaller than 36x36 are not supported e Files with a resolution smaller than 100x100 may not be displayed e Some supported files may not be displayed e Only a frame appears when the content of image data cannot be displayed in the Thumbnail mode 87 PC LESS Presentation continued Thumbnail mode The Thumbnail mode displays the images stored in a USB storage device on the Thumbnail screen Maximum 20 images are displayed in a screen If you wish you can jump into the Full Screen mode or Slideshow mode after you select some images in the Thumbnail mode The Thumbnail mode will be started as the primary function of the PC LESS Presentation after selecting the USB TYPE A port as the input source erja Tr Es os Thumbnail menu a ar ae Selected image ERIS Om Thumbnail images 88 PC LESS Presentation continued Operating by buttons or keys You can control the images in the Thumbnail screen with the remote control or keypad or a web browser software The following functions
86. how or Full Screen is displayed e When the Slideshow mode is set to ONE TIME the last slide of the presentation will be held on screen till the ENTER button on the remote control or Web Remote Control or INPUT button on the projector is pushed 93 PC LESS Presentation continued You can play the Slideshow at your desired configuration Configure the Slideshow items in the Thumbnail 1 RETURN Returns to the thumbnail mode SLIDESHON sELECT 2 PLAY Play the Slideshow PLAY EXECUTE 3 START Set the beginning number of the STOP 10 Slideshow ieee Be TIME 4 STOP Set the end number of the Slideshow 5 INTERVAL Set the interval time of the Slideshow It is not recommend to set the interval time very short something like several seconds because it may take more than several seconds to read and display an image file if it is stored in very deep layer directory or if So many files are stored in the same directory 6 PLAY MODE Select the Slideshow mode ONE TIME Play the Slideshow one time ENDLESS Play the Slideshow endless NOTE The settings of the Slideshow are saved to the playlist txt file that is stored in the storage media If the file is not existed it is generated automatically e The settings for the START STOP INTERVAL and PLAY MODE are saved to the Playlist e If the storage media is under the write protection or the playlist txt is the read only type file it is imposs
87. ible to change the settings of the Slideshow 94 PC LESS Presentation continued Playlist The Playlist is a DOS format text file which decides the order of displayed still image files in the Thumbnail or Slideshow The playlist file name is playlist txt and it can be edited on a computer It is created in the folder that contains the selected image files when the PC LESS Presentation is started or the Slideshow is configured Example of playlist txt files START setting STOP setting INTERVAL setting PLAY MODE setting img001 jpg img002 jpg 600 img003 jpg 00 rot1 img004 jpg SKIP img005 jpg 1000 rot2 SKIP The playlist txt file contains the following information Each piece of information requires to be separated by and at the end of each line 1st line START STOP INTERVAL and PLAY MODE settings E194 2nd line and after file name interval time rotation setting and skip setting interval time It can be set from 0 to 999900 ms with an increment of 100 ms rotation setting rot1 means a rotation at 90 degrees clockwise rot2 and rot3 increase another 90 degrees in order skip setting SKIP means that the image will not be displayed in the Slideshow NOTE The maximum length in a line on the playlist txt file is 255 characters including linefeed If any line exceeds the limit the playlist txt file becomes invalid e Up to
88. ill be converted to the projector s panel resolution before being displayed The best display performance will be achieved if the resolutions of the input signal and the projector panel are identical e If you connect this projector and a notebook computer you need output the display to an external monitor or output simultaneously to the internal display and an external monitor Consult the computer s manual for the setting e Depending on the input signal the automatic adjustment function of this projector may take some time and not function correctly Note that a composite sync signal or sync on green signal may confuse the automatic adjustment function of this projector L443 If the automatic adjustment function does not work correctly you may not see the dialog to set the display resolution In such a case use an external display device You may be able to see the dialog and set an appropriate display resolution e To use the Interactive Function it is necessary to install the StarBoard Software in the DVD ROM on the computer continued on next page 11 Connecting with your devices continued e If you insert a USB storage device such as a USB memory into the USB TYPE A port and select the port as the input source you can view images stored in the device L487 e You can connect a dynamic microphone to the MIC port with a 3 5 mm mini plug In that case the built in soeaker outputs the sound from the mic
89. in the function s name and adjusts the picture automatically depending on the data e The LOAD functions whose linked memory has no data are skipped e Remember that the current adjusted condition will be lost by loading data If you want to keep the current adjustment please save it before performing a LOAD function e There may be some noise and the screen may flicker for a moment when loading data This is not malfunction e You can perform the LOAD function using MY BUTTON Please see MY BUTTON item in OPTION menu E459 37 IASG ONU From the IMAGE menu items shown in the table m ADVANCED MENG E 0 SELER below can be performed PICTURE E OVERSCAN 5 Select an item using the A cursor buttons and TET DN ee press the cursor button or ENTER button to Aol SSE een execute the item Then perform it according to the Peis following table E EASY MENU EXIT COMPUTER IN 1 1280 x 800 60Hz p ltem escription Using the A V buttons switches the mode for aspect ratio For a computer signal NORMAL 4 3 16 9 16 10 NATIVE Nees For an HDMI signal NORMAL 4 3 16 9 16 10 14 9 NATIVE ASPECT tt efi For a video signal s video signal or component video signal 4 3 16 9 16 10 14 9 NATIVE a For an input signal from the LAN USB TYPE A or USB TYPE B port or if there is no signal 16 10 fixed e The NORMAL mode keeps the original aspect ratio of the signal Using the lt gt bu
90. ing that there is nothing that the lens door hits while opening or closing or Lighting In Red Lighting Turned Turned In Red off off It is time to clean the air filter Please immediately turn the power off and clean or Lighting Simultaneous change the air filter referring to the section Cleaning In Green blinking in Red and replacing the air filter After cleaning or changing the air filter please be sure to reset the filter timer After the remedy reset the power to ON There is a possibility that the interior portion has become overcooled Please use the unit within the usage temperature parameters 5 C to 35 C After the treatment reset the power to ON Lighting Alternative In Green blinking in Red Blinking In At least 1 Power ON schedule is saved to the Green for Turned Turned projector approx 3 off off Please refer to Schedule Settings section of User s seconds Manual Network Guide NOTE When the interior portion has become overheated for safety purposes the projector is automatically shut down and the indicator lamps may also be turned off In such a case disconnect the power cord and wait at least 45 minutes After the projector has sufficiently cooled down please make confirmation of the attachment state of the lamp and lamp cover and then turn the power on again 112 Resetting all settings When it is hard to correct some wrong settings the FACTORY RESET function of S
91. ion may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu E167 26 Adjusting the position Press the POSITION button on the remote control while no menu is on screen to display the D SHIFT 145 dialog on screen 2 Use the A WV lt and gt buttons to adjust the picture position Press the POSITION button again to finish this operation POSITION button e This is a function to shift the position of the shrunken picture by the D ZOOM 445 function e When an OSD On Screen Display menu is displayed this operation moves the position of the OSD menu but the picture position is not R31 e The D SHIFT adjustment values are not valid when the D ZOOM is set to 320 full screen Correcting the keystone distortions KEYSTONE button 1 Press KEYSTONE button on the remote 2 control A dialog will appear on the screen Vie Uae EXIT to aid you in correcting the distortion 2 Use the A cursor buttons to select MANUAL or PERFECT FIT operation and press the button to perform the following 1 MANUAL displays a dialog for keystone correction Use the A V buttons to select J KEYSTONE KEYSTONE then use the gt buttons for adjustment Fren 2 PERFECT FIT displays a dialog for adjusting the shape of the projected image in each of the corners and sides To close the dialog and complete this operation p
92. is attempted Please use the standard drivers in your computer as this projector is a Plug and Play monitor e When AUTO is selected for the COMPUTER IN1 or COMPUTER IN2 port in COMPUTER IN of the INPUT menu that port will accept component video signals 443 e When the USB TYPE B port and the computer s USB type A port are connected you can use the USB TYPE B port as a picture input port from the computer use the remote control as a simple mouse and keyboard of the computer or use the Interactive Function E118 57 Computer VCR DVD Blu ray Disc player v asn IINGH AV 1dSI CONTROL MONITOR OUT Cc Cc cees Lo LNO olanv O2Ec SU continued on next page 10 Connecting with your devices continued NOTE Before connecting the projector to a computer consult the computer s manual and check the compatibility of the signal level the synchronization methods and the display resolution output to the projector Some signal may need an adapter to input this projector Some computers have multiple screen display modes that may include some signals which are not supported by this projector Although the projector can display signals with resolution up to UXGA 1600X1200 the signal w
93. is function cannot be selected when the ON is selected to the MyScreen Lock item 52 e This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu 475 e This function is unavailable for a signal from the LAN USB TYPE A USB TYPE B or HDMI port continued on next page D1 ltem escription O O O O OO Using the A buttons turns on off the MyScreen lock function ON amp OFF MyScreen Lock When the ON is selected the item MyScreen is locked Use this function for protecting the current MyScreen e This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu 475 Using the A V buttons turns on off the message function ON amp OFF When the ON is selected the following message function works AUTO IN PROGRESS while automatically adjusting NO INPUT IS DETECTED SYNC IS OUT OF RANGE INVALID SCAN FREQ Searching while searching for the input Detecting while an input signal is detected AUTO ECO MODE while starting up with AUTO ECO MODE MESSAGE The indication of the input signal displayed by changing The indication of the aspect ratio displayed by changing The indication of the PICTURE MODE displayed by changing The indication of the ACTIVE IRIS displayed by changing The indication of the MY MEMORY displayed by changing The indication of FREEZE and II while freezing the
94. item in the SECURITY menu 475 the START UP is fixed to MyScreen continued on next page 50 pttem scription This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen Display the image you want to capture before executing the following procedure 1 Selecting this item displays a dialog titled MyScreen It will ask you if you wish to start capturing te ete you start capturing an image from m the current screen Please wait for the target image to be displayed and press the ENTER or INPUT button when the image is displayed The image will freeze and the frame for capturing will appear To stop performing press the RESET button on the remote control 2 Using the A V gt buttons adjusts the frame position Please move the frame to the position of the image which you want to use The MyScreen frame may not be able to be moved for some input signals To start registration press the ENTER or INPUT button on the remote control To restore the screen and return to the previous dialog press the RESET button on the remote control Registration may take several minutes When the registration is completed the registered screen and the following message is displayed for several seconds MyScreen registration is finished If the registration failed the following message is displayed A capturing error has occurred Please try again e Th
95. jector s buttons or the remote control buttons is pressed or one of the commands except get commands is transmitted to the CONTROL port during the corresponding time projector will not be turned off Please refer to the section Turning off the power L21 Using the A V buttons selects the function of USB TYPE B port To use this function you need to connect the USB TYPE B port of the projector and the type A USB port of a computer MOUSE USB DISPLAY MOUSE The accessory remote control works as the simple mouse and keyboard of the computer USB DISPLAY The port works as an input port that receives image signals from the computer L196 e It may take several seconds to project the images from the USB USB TYPEB TYPEB port e In the following cases a message to notify you that USB TYPE B port is not available for picture input appears together with the USB TYPE B dialog This setting is switched to MOUSE while a picture input from the USB TYPE B port is projected The USB TYPE B port is selected as the picture input source while this setting is set to MOUSE Select USB DISPLAY in the dialog to project the picture input to the USB TYPE B port In this case you cannot use the simple mouse and keyboard function Otherwise select other port for picture input continued on next page of ltem scription O O O O O The lamp time is the usage time of the lamp counted after the last resetting It is sho
96. ken for machine defects continued A f Reference Phenomenon Cases not involving a machine defect sone The pen does not operate This may be due to poor contact of the battery Remove the battery and load it again 19 Be sure to use only the batteries specified Has the battery run out a 19 Replace it with a new one The StarBoard Software files may be corrupted or installation may not have completed successfully Uninstall the StarBoard Software and reinstall it Is the projector positioned too close to the screen Install and use at a position where the screen size is between 45 60 100 when digital zoom is at the maximum 100 Is the pen position calibrated Perform calibration of the pen position Are the projector and screen used at the following places Place where wind from the air conditioner etc is blowing directly on the screen Place near an inverter fluorescent light Place surrounded by walls or ceiling made of materials that allow easy sound reflection such as metal Place near a CRT display TV etc Place that is exposed to direct sunlight Place that is exposed to speaker sound or noise Place where more than one projector is installed in the same room Place where equipment used emits ultrasonic waves or vibrates Are you using more than one pen at the same time 49 Only one pen can be used at a time Is transmission between the pen and the projector obstruct
97. le between two hubs Video files cannot The LiveViewer has been intentionally or accidentally be played properly forced to shut down on a computer DirectDraw or Direct3D has been disabled on your Windows on which the Please refer to the Microsoft Help and Support home page LiveViewer was on how to enable DirectDraw or Direct3D continued on next page 116 Phenomena that may be easy to be mistaken for machine defects continued A f Reference Phenomenon Cases not involving a machine defect sone Is the use of USB cables disabled Enable the use of USB cables The StarBoard Software may not be recognized if your laptop has a built in modem The projector may not be recognized if your computer has a built in modem For details refer to the relevant manuals such as that for When using the computer the interactive Is the power of the projector turned on function the Check to ensure that the POWER indicator of the projector projector is lit in green can not be recognized Is the USB cable connected correctly 83 Connect the USB cable to the computer Is the system started up in the correct sequence Start up the system in the correct sequence The StarBoard Software files may be corrupted or installation may not have completed successfully Uninstall the StarBoard Software and reinstall it continued on next page 117 Phenomena that may be easy to be mista
98. medy please contact your dealer or service company The cooling fan is not operating Please turn the power off and allow the projector to cool down at least 20 minutes After the projector has sufficiently cooled down please make confirmation that no foreign matter has become caught in the fan etc and then turn the power on again If the same indication is displayed after the remedy please contact your dealer or service company 111 Regarding the indicator lamps continued POWER indicator indicator indicator Description There is a possibility that the interior portion has become heated Please turn the power off and allow the projector to cool down at least Blinking 20 minutes After the projector has sufficiently cooled down please make in Red confirmation of the following items and then turn the power on again Lighting Is there blockage of the air passage aperture In Red Is the air filter dirty e Does the peripheral temperature exceed 35 C e Is the projector used at an altitude of about 1600 m or higher If the projector is used at an altitude of about 1600 m or higher set FAN SPEED of the SERVICE item in the OPTION menu to HIGH G67 The lens door is not opened properly One of the followings has been happened e The lens door is not opened properly when the projector is turned on e The lens door position is shifted while the projector is working Restart the projector after confirm
99. mes the projector will turn off 3 If you have forgotten your PIN code 3 1 While the Enter PIN code box is displayed press and hold the RESET button for 3 seconds or press and hold the INPUT button for 3 seconds while pressing the gt button on the projector The 10 digit Inquiring Code will be displayed E e If there is no key input for about 5 minutes PER EE while the Inquiring Code is displayed the 01 2345 6789 projector will turn off 3 2 Contact your dealer with the 10 digit Inquiring Code Your PIN code will be sent after your user registration information is confirmed continued on next page 76 ltem scription O O O O O O If this function is set to ON when the vertical angle of the projector or MIRROR setting at which the projector Cees eee is turned on is different than the previously recorded the ea a ate TRANSITION DETECTOR ON alarm will be displayed a S and the projector will not display the input signal T aiid e To display the signal again set this function OFF e After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm the lamp will turn off e Keystone adjustment feature has been prohibited as long as the Transition Detector function is on 1 Turning on the TRANSITION DETECTOR 1 1 Use the A V buttons on the SECURITY menu to select TRANSITION DETECTOR and press ON the gt or the ENTER button to display the ON EMT TRANSITION DETECTOR on off menu 1 2 Use the A V buttons on the TRA
100. n or other problems gt Position the projector to prevent light from directly hitting the projector s remote sensor gt Do not place the product in a place where radio interference may be caused gt Do not place this product in a magnetic field gt If the projector is used at an altitude of about 1600 m or higher set FAN SPEED of the SERVICE item in the OPTION menu to HIGH 161 Otherwise set it to NORMAL If the projector is used with a wrong setting it may cause damage to the projector itself or the parts inside Connecting with your devices Before connecting the projector to a device consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories such as a cable in accord with the signal of the device Consult your dealer when the required accessory did not come with the product or the accessory is damaged After making sure that the device and projector are turned off connect them following the instructions below AAWARNING P Use only the appropriate accessories Otherwise it could cause a fire or damage to the device and the projector Use only the accessories specified or recommended by the projector s manufacturer Consult your dealer when the required accessory did not come with the product or the accessory is damaged It may be regulated under some standard For a cable with a core at only one end connect the end with the core
101. oftware to support Starboard software annotation Meantime please use Starboard software on COMPUTER IN or HDMI inputs 121 Specifications Please see the Specifications in the User s Manual concise which is a book End User License Agreement for the Projector Software e Software in the projector consists of the plural number of independent software modules and there exist our copyright or and third party copyrights for each of such software modules e Be sure to read End User License Agreement for the Projector Software which is separated document in the CD 122
102. ojector will stop searching and display the image COMPUTER IN1 gt COMPUTER IN2 gt LAN gt USB TYPE A FJ VIDEO S VIDEO HDMI USB TYPE B e It may take several seconds to project the images from the USB TYPE B port Using the A V buttons turns on off the DIRECT POWER ON function ON amp OFF When set to the ON the lamp in projector will be automatically turned on without the usual procedure 120 only when the projector is DIRECT POWER supplied with the power after the power was cut while the lamp was on ON e This function does not work as long as the power has been supplied to the projector while the lamp is off e After turning the lamp on by the DIRECT POWER ON function if neither input nor operation is detected for about 30 minutes the projector is turned off even though the AUTO POWER OFF function 0157 is disabled continued on next page 56 ltem scription Using the A V buttons adjusts the time to count down to automatically turn the projector off Long max 99 minutes Short min 0 minute DISABLE AUTO POWER OFF AUTO POWER OFF ENABLE DISABLE a z Vv RETURN EXIT Q RETURN EXIT AUTO POWER When the time is set to 0 the projector is not turned off automatically OFF When the time is set to 1 to 99 and when the passed time with no signal or an unsuitable signal reaches at the set time the projector lamp will be turned off If one of the pro
103. on 27 Correcting the keystone distortions 27 Using the magnify feature 28 Temporarily freezing the screen 29 Temporarily blanking the screen 29 Using the menu function 30 EASY MENU 00005 32 INTERACTIVE ASPECT D zoom KEYSTONE KEYSTONE PERFECT FIT PICTURE MODE Eco MODE Mirror RESET FILTER TIME LANGUAGE ADVANCED MENU EXIT INTERACTIVE menu 34 INTERACTIVE PICTURE menu 220e00 35 BRIGHTNESS CONTRAST GAMMA COLOR TEMP Cotor TINT SHARPNESS ACTIVE IRIS MY MEMORY IMAGE menu ASPECT OVER SCAN V POSITION H POSITION H PHASE H size AUTO ADJUST EXECUTE INPUT menu PROGRESSIVE VIDEO NR COLOR SPACE VIDEO FORMAT HDMI FORMAT HDMI RANGE COMPUTER IN FRAME LOCK RESOLUTION 2 ae SETUP menu 222000n ee 45 D zoom D SHIFT PICT POSIT H KEYSTONE K KEYSTONE PERFECT FIT AUTO ECO MODE Eco mope Mirror STANDBY MODE MONITOR OUT AUDIO menu 0200 nn wae 48 VOLUME SPEAKER AUDIO SOURCE Hpm auno Mic LeveL Mic VOLUME SCREEN menu 2000008 50 LANGUAGE MENU POSITION BLANK START UP MyScreen MyScreen Lock MESSAGE SOURCE NAME TEMPLATE C C OPTION menu 22 2000008 56 AUTO SEARCH DIRECT POWER ON AUTO POWER OFF USB TYPE B LAMP TIME FILTER TIME My BUTTON My source SERVICE NETWORK menu 2000 5 67 SETUP PROJECTOR NAME My IMAGE AMX D D PRESENTATION INFORMATION SERVICE SECURITY menu 2000 74 SECURITY P
104. or SECURITY EXIT Press the lt or ENTER button to finish the OSD menu 33 INES NANG UNS Tanker 1 ADVANCED MENU 3 SELECT z amp INTERACTIVE CALIBRATE PICTURE IMAGE INPUT 4 SETUP D AUDIO SCREEN amp OPTION as NETWORK SECURITY EASY MENU EXIT COMPUTER IN 1 1280 x 800 60Hz ltem escription Executing this item starts or cancels calibration of the position of the pen INTERACTIVE For more details refer to the manual for the StarBoard Software in the bundled DVD ROM A80 34 PICMURE menu From the PICTURE menu items shown in the table QE Asr mm Sees m INTERACTIVE O BRIGHTNESS 0 below can be performed SINGS Acie eee Select an item using the A V cursor buttons and nee a te Ue press the cursor button or ENTER button to Peka D SHARPNESS A execute the item Then perform it according to the pavima following table E EASY MENU EXIT COMPUTER IN 1 1280 x 800 60Hz ltem Description justs the brightness BRIGHTNESS Using the lt r buttons adjusts the brightness Dark Light x CONTRAST Using the lt gt buttons adjusts the contrast Weak Strong Using the A V buttons switches the gamma mode 1 DEFAULT amp 1 CUSTOM 2 DEFAULT amp 2 CUSTOM 3 DEFAULT gt 2 6 CUSTOM 3 CUSTOM 2 2 6 DEFAULT amp 5 CUSTOM 5 DEFAULT 4 CUSTOM 4 DEFAULT To adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the button or the
105. ot yield any response even on the 60 100 sized screen e Note that the interactive pen may not function properly if it is used near equipment that emits ultrasonic waves for example pest control unit motion sensor etc or it vibrates e StarBoard Software may not activate if DirectX function of the computer is turned off In that case turn on DirectX function Please inquire your computer or OS support hotline on how to confirm the settings of DirectX function On Off 82 Interactive Function continued Connection during use Follow the procedure below to connect the computer to the projector el Computer DISPLAY COMPUTERIN2 CC 7 IN4 ce TT damp MIC AUDIOIN1 AUDIOIN3 AUDIOOUT S VIDEO USB TYPEA DC5V D 0 5A CONTROL MONITOR OUT OUT dE ime o 1 Connect the computer cable to the COMPUTER IN port of the projector and fasten using the screw 2 Connect the opposite end of the computer cable in 1 to the DISPLAY port of the computer and fasten using the screw 3 Connect the USB TYPE B port of the projector to the USB type A port of the computer with a USB cable 4 Connect the power supply of the projector and computer NOTE When Interactive Function is in use it is recommended that you make use of input signals from the COMPUTER IN1 and
106. owing items please turn the power ON again ga Uns i h e Is there blockage of the air passage aperture e Is the air filter dirty e Does the peripheral temperature exceed 35 C e Is the projector used at an altitude of about 1600 m or higher If the projector is used at an altitude of about 1600 m or higher set FAN SPEED of the SERVICE item in the OPTION menu to HIGH 67 ae A note of precaution when cleaning the air filter 4000 HRS PASSED AFTER THE Please immediately turn the power off and clean or change a Aaa the air filter referring to the Cleaning and replacing the par apie let ate mente air filter section of this manual After you have cleaned or TO REMOVE WARNING MESSAGE Aa us i RESET FILTER TIME changed the air filter please be sure to reset the filter timer SEE MANUAL FOR FURTHER INFO Ba 5 8 104 D The button operation is not available 110 Regarding the indicator lamps When operation of the LAMP TEMP and POWER indicators differs from usual check and cope with it according to the following table indicator indicator indicator p Lighting Turned Turned The projector is in a standby state In Orange off off Please refer to the section Power on off Blinking Turned Turned The projector is warming up In Green off off Please wait Lighting Turned Turned The projector is in an on state In Green off off Ordinary operations may be performed Blinking Turned T
107. p the pen or mishandle it Turning on the power STANDBY ON button ip indicator Hi INPUT 1 Make sure that the power cord is firmly and correctly connected to the projector and the outlet 9 Make sure that the POWER indicatoris On steady orange 4111 ane 3 Confirm that there is nothing that the lens door hits while opening Press STANDBY ON button on the projector or the remote control The lens door opens the projection lamp lights up and the POWER indicator begins to blink green When the power is completely on the indicator will stop blinking and light in steady green 111 a AWARNING P Never look into the projection lens or mirror while the projection lamp lights since the projection lamp ray may cause a trouble on your eyes gt Be careful not to pinch your finger with the lens door to prevent an injury gt Do not place the projector vertically with the lens door open as shown in the figure on the right It could cause malfunction or injury Tabletop use must be set up with the designated optional accessories gt Do not stand under the projector mounted on the wall or ceiling when its lens door is opening or closing Moreover do not look at the mirror when the lens door is opening or closing gt Never touch a lens door or mirror If the mirror is broken the projected image will be distorted Close the lens door and contact your dealer 20 Turning off the power 4
108. pears from the Windows notification area Quit The application is closed and the icon disappears from the Windows notification area NOTE If you wish to restart the application you need to unplug the USB cable and plug it again Floating menu If you select Display on the Right Click menu the Floating menu shown in the right will appear on your computer screen C3 Start capture button The transmission to the projector is started and the images will be displayed iO Stop button The image transmission is stopped Hold button The image on the projector s screen is temporally frozen The last image before the button is clicked is remained on the screen You can revise the image data on your computer without showing it on the projector s screen Option button The Options window is displayed Minimize button The Floating menu is closed and the icon reappears in the Windows notification area NOTE If you click the Start capture button and or Stop button repeatedly images may not be displayed on the screen USB Display continued Options window If you select the Option button on the Floating menu the Options window is displayed Settings About Optimize Performance Transmission speed Image quality Keep PC resolution Display LiveViewerLite for USB Optimize Performance The LiveViewer Lite for USB captures screenshots in JPEG data and sends t
109. pens comes with a mini built in transmitter Transmission of drawing data from the pen may fail if you hold the pen at the transmission unit while writing or drawing If the characters or objects that you have written or drawn on the screen cannot be loaded correctly on the computer check whether the problem can be resolved by changing the way you hold the pen NOTE The projector detects the pen coordinates by reading infrared and ultrasound signals emitted by the pen Therefore input may fail if transmission between the pen and the projector is blocked Make sure that signal transmission is not obstructed Interactive Function continued Basic pen operation In the default setting the button at the tip of the pen is assigned with the function of the left mouse button When Windows is running you can perform the following mouse operations using the button at the tip of the pen e Click Press the tip of the pen against the screen surface with moderate force and lift it quickly e Double click Perform the click operation twice quickly by pressing the tip of the pen against the screen surface with moderate force and lifting it e Drag Press the tip of the pen against the screen surface with moderate force and move the pen without lifting it Customizing the pen The pen comes with a button at the tip and two buttons at the side You can assign mouse actions to any of these three buttons The default button settings are a
110. projector to cool sufficiently The care in a high temperature state of the projector could cause a burn and or malfunction to the projector gt Never try to care for the inside of the projector personally Doing is so dangerous gt Avoid wetting the projector or inserting liquids in the projector It could result in a fire an electric shock and or malfunction to the projector e Do not put anything containing water cleaners or chemicals near the projector e Do not use aerosols or sprays ACAUTION P Please take right care of the projector according to the following Incorrect care could cause not only an injury but adverse influence such as discoloration peeling paint etc gt Do not use cleaners or chemicals other than those specified in this manual gt Do not polish or wipe with hard objects NOTICE gt Do not directly touch the lens surface with hands 108 Mroubleshooting If an abnormal operation should occur stop using the projector immediately Otherwise if a problem occurs with the projector the following checks and measures are recommended before requesting repair If this does not resolve the problem please contact your dealer or service company They will tell you what warranty condition is applied Related messages When some message appears check and cope with it according to the following table Although these messages will be automatically disappeared around several minutes it will be reappeared e
111. ral seconds to project the images from the USB TYPE B port Selecting an aspect ratio 1 Press ASPECT button on the remote control ASPECT button Each time you press the button the projector switches the mode for aspect ratio in turn O For a computer signal NORMAL gt 4 3 gt 16 9 gt 16 10 gt NATIVE E E a a a O For an HDMI signal NORMAL gt 4 3 gt 16 9 gt 16 10 gt 14 9 gt NATIVE g O For a video signal s video signal or component video signal 4 3 gt 16 9 gt 16 10 gt 14 9 gt NATIVE es O For an input signal from the LAN USB TYPE A or USB TYPE B port or if there is no signal 16 10 fixed e ASPECT button does not work when no proper signal is inputted e NORMAL mode keeps the original aspect ratio setting e The on screen menu might be displayed outside of the image display area depending on the adjustment value of the ASPECT D ZOOM J KEYSTONE and K KEYSTONE Changing the values of ASPECT D ZOOM KEYSTONE and G KEYSTONE may fix the symptom 24 Adjusting the projector s elevator The projector has Front foot for inclinations and Rear foot for horizontals Spacers on the each elevator foot are installed at the time of shipment and projector is in a condition to be able to just project If necessary detach the spacer and the elevator feet can be manually twisted to make more precise adjustments Front foot Rear foot 4 Spacer NOTE The adjustment angle can
112. rd The Interactive Pen included with the projector allows you to write or draw directly on the projected image Also you can control the connected computer on the screen in the same way as using a mouse v PJLink is a unified standard for operating and controlling data projectors PJLink enables central control of projectors manufactured by different vendors and projectors can be operated by a controller PULink compliant equipment can be managed and controlled at any time and in any place regardless of manufacturer For the command of PJLink see Technical For specifications of PULink see the web site of the Japan Business Machine and Information System Industries Association URL http pjlink jomia or jp as of Jun 2011 SSS Checking the contents of package Please see the Contents of package section in the User s Manual concise which is a book Your projector should come with the items shown there Require of your dealer immediately if any items are missing NOTE Keep the original packing materials for future reshipment Be sure to use the original packing materials when moving the projector Use special caution for the lens elie NEMES Projector 1 Lamp cover 4101 The lamp unit is inside 2 Control panel R5 3 Elevator feet x 2 E125 4 Remote sensor 417 5 Lens L106 6 Intake vents 7 Filter cover L103 The air filter and intake vent are inside
113. ress KEYSTONE button again Even if you do not do anything the dialog will automatically disappear after a few seconds e The adjustable range of this function will vary among inputs For some input this function may not work well e This function will be unavailable when Transition Detector is on 477 27 Using the magnify feature 1 2 3 4 Press the MAGNIFY ON button on the remote control MAGNIFY The picture will be magnified and the MAGNIFY dialog will ON OFF button appear on the screen When the MAGNIFY ON button is pressed for the first time after the projector is turned on the 5AE picture will be zoomed by 1 5 times On the dialog triangle QD O O marks to show each direction will be displayed can O The display magnification of the projector switches in order con ne with every press of the MAGNIFY ON button O For computer signals HDMI RGB signals input signals from the LAN or USB TYPE B port 1 5 times gt 2 times gt 3 times gt 4 times gt 1 time O For video signals s video signals component video signals or HDMI Component signals 1 5 times gt 2 times gt 1 time a E While the triangles are displayed on the dialog use the A W lt gt cursor buttons to shift the magnifying area Press the MAGNIFY OFF button on the remote control to exit magnification e The MAGNIFY dialog will automatically disappear in several seconds with no operation The dialog
114. rning the MyScreen PASSWORD off will allow normal operation of these functions e Please do not forget your MyScreen PASSWORD 2 Turning off the MyScreen PASSWORD 2 1 Follow the procedure in 1 1 to display the MyScreen PASSWORD on off menu F MyScreen PASSWORD T 2 2 Select OFF to display the ENTER ENA PASSWORD box large Enter the registered eee password and the screen will return to the ei MyScreen PASSWORD on off menu ENTER PASSWORD box If an incorrect PASSWORD is input the menu will ange close If necessary repeat the process from 2 1 3 If you have forgotten your password 3 1 Follow the procedure in 1 1 to display the MyScreen PASSWORD on off menu 3 2 Select OFF to display the ENTER PASSWORD box large The 10 digit Inquiring Code will be displayed inside the box 3 3 Contact your dealer with the 10 digit Inquiring Code Your password will be sent after your user registration information is confirmed P MyScreen PASSWORD NOTE NEW PASSWORD 0000 continued on next page 19 ltem escription O O PIN LOCK is a function which prevents the projector from being used unless a registered Code is input 1 Turning on the PIN LOCK 1 1 Use the A V buttons on the SECURITY menu to PIN LOCK select PIN LOCK and press the gt button or the ON ENTER button to display the PIN LOCK on off RETURN GREXT menu 1 2 Use the A V buttons on the PIN LOCK on PIN BOX off menu to select ON and the Enter PIN Enter PIN
115. rom LAN port e USB TYPE A Selects input from USB TYPE A port e USB TYPE B Selects input from USB TYPE B port e HDMI Selects input from HDMI port e COMPUTER IN1 Selects the input from COMPUTER IN1 port e COMPUTER IN2 Selects the input from COMPUTER IN2 port e S VIDEO Selects the input from S VIDEO port e VIDEO Selects the input from VIDEO port e SLIDESHOW Selects the input from USB TYPE A port and starts a Slideshow e MY IMAGE Displays the MY IMAGE menu E4170 MY BUTTON e MESSENGER Turns the messenger text displayed on the screen on off Messenger Function in the User s Manual Network Guide When there is no transferred text data to display the message NO MESSENGER DATA appears e CALIBRATE Starts or cancels calibration of the position of the pen For more details refer to the manual for the StarBoard Software in the bundled DVD ROM e INFORMATION Displays SYSTEM_INFORMATION INPUT_INFORMATION M66 NETWORK_INFORMATION 173 or nothing e MY MEMORY Loads one of adjustment data stored 37 When more than one data are saved the adjustment changes every time the MY BUTTON is pressed When no data is saved in memory the dialog No saved data appears When the current adjustment is not Temporary con saved to memory the dialog as shown in SGAE the right appears lf you want to keep the current adjustment please press the gt button to exit Otherwise loading a data will overwrite the cu
116. rophone even while the sound from the projector is output You can input line level signal to the MIC port from equipment such as wireless microphone Select HIGH in the MIC LEVEL item of the AUDIO menu when you input line level audio signal to the MIC port In the normal mode the volume of the microphone can be adjusted separately from the volume of the projector using the menu L149 In the standby mode the volume of the microphone is adjustable with the VOLUME buttons on the remote control in synchronization with the volume of the projector 2122 Even when the sound of projector is set to mute mode by the AUDIO SOURCE function 4148 the volume of the microphone is adjustable In both modes standby or normal the MUTE button on the remote control works on the sounds of the microphone and the projector 922 Speakers Microphone system with an amplifier Monitor USB storage evice a USB TYPE B HDMI COMF UTERIN2 COMPUTER IN1 NOTE If a loud feedback noise is produced from the speaker move the microphone away from the speaker e This projector doesn t support plug in power for the microphone 142 continued on next page Connecting with your devices continued To use network functions of the projector connect the LAN port with the computer s LAN port or with an access point that
117. rrent adjusted condition gt No saved data dit ion Recall saved parame ters continued on next page 59 ltem i escription e ACTIVE IRIS Changes the active iris mode e PICTURE MODE Changes the PICTURE MODE 8433 e FILTER RESET Displays the filter time reset confirmation dialogue 458 e TEMPLATE Makes the template pattern selected to the TEMPLATE item G54 appear or disappear e AV MUTE Turns the picture and audio on off e D ZOOM Turns the D ZOOM mode on off When the D ZOOM mode is on use the lt gt cursor buttons to adjust the magnification ratio e D SHIFT Turns the D SHIFT mode on off When the D SHIFT mode is on use the A W lt P cursor buttons to move the magnifying area e RESOLUTION Turns on off the RESOLUTION dialog L444 e MIC VOLUME Turns on off the MIC VOLUME dialog 4449 e ECO MODE Turns on off the ECO MODE dialog 2147 MY BUTTON Continued Using A V buttons selects the picture input port to be selected with pressing the MY SOURCE DOC CAMERA button on the remote control MY SOURCE You can use this function not only for document cameras but also computers and other equipment rica IN1 lt lt COMPUTER IN2 LAN USB TYPEA 9 VIDEO S VIDEO amp HDMI amp USB TYPE B continued on next page 60 ltem escription U O Selecting this item displays the SERVICE oe menu Soot ee Select an item using the A V buttons and A KEYLOCK oy
118. ry away from children and pets e Do not recharge short circuit solder or disassemble a battery e Do not place a battery in a fire or water Keep batteries in a dark cool and dry place e If you observe battery leakage wipe out the leakage and then replace a battery lf the leakage adheres to your body or clothes rinse well with water immediately e Obey the local laws on disposing the battery About the remote control signal The remote control works with the projector s remote sensor This projector has a remote sensor on the front The sensor senses the signal within the following range when the sensor is active 60 degrees 30 degrees to the left and right of the sensor within 3 meters about NOTE The remote control signal reflected in the screen or the like may be available If it is difficult to send the signal to the sensor directly attempt to make the signal reflect e The remote control uses infrared light to send signals to the projector Class 1 LED so be sure to use the remote control in an area free from obstacles that could block the remote control s signal to the projector e The remote control may not work correctly if strong light such as direct sun light or light from an extremely close range such as from an inverter fluorescent lamp shines on the remote sensor of the projector Adjust the position of projector avoiding those lights Changing the frequency of remote control signal The accessory remo
119. s NTSC for VIDEO or S VIDEO or 480i 60 for COMPUTER IN1 or COMPUTER IN2 and when AUTO is selected for DISPLAY in the C C menu under the SCREEN menu M55 Selecting an input signal INPUT button 4 Press INPUT button on the projector Each time you press the button the projector switches its input port from the current port as below gt COMPUTER IN1 gt COMPUTER IN2 VIDEO LAN M NV S VIDEO USB TYPE A HDM USBTYPEB lt _ e While ON is selected for AUTO SEARCH item in OPTION menu 056 the projector will keep checking the ports in above order repeatedly till an input signal is detected e It may take several seconds to project the images from the USB TYPE B port continued on next page 22 Selecting an input signal continued 4 Press COMPUTER button on the remote control COMPUTER button Each time you press the button the projector switches its input port from the current port as below COMPUTER IN1 gt COMPUTER IN2 gt LAN USB TYPEB lt USBTYPEA e While ON is selected for AUTO SEARCH item in OPTION menu the projector will keep checking every port sequentially till an input signal is detected L156 If COMPUTER button is pressed when VIDEO S VIDEO or HDMI port is selected the projector will check COMPUTER IN1 port first e t may take several seconds to project the images from the USB TYPE B port 4 Press VIDEO button on the remote control VIDEO button Ea
120. s and the MUTE function for sounds are working AV MUTE may be active Refer to the item Sound does not come out and No pictures are displayed on the next page to turn off the MUTE and BLANK functions continued on next page 113 Phenomena that may be easy to be mistaken for machine defects continued Cases not involving a machine defect patti The signal cables are not correctly connected 9 13 Correctly connect the audio cables The MUTE function is working Restore the sound pressing MUTE or VOLUME button on the remote control The volume is adjusted to an extremely low level Adjust the volume to a higher level using the menu function or the remote control Sound does not come out The mode selected for HDMI AUDIO is not suitable Check each of the two modes provided and select the suit able one for your HDMI audio device The signal cables are not correctly connected 9 Correctly connect the connection cables The brightness is adjusted to an extremely low level 35 Adjust BRIGHTNESS to a higher level using the menu function monitor using another plug and play monitor The BLANK screen is displayed 29 Press BLANK button on the remote control The USB TYPE B port is selected as the picture input source even if MOUSE is selected for USB TYPE B No pictures are Select USB DISPLAY for USB TYPE B in OPTION menu to 57 The computer cannot detect the projector as a plug and play moni
121. s follows Button Description of action Pen tip Left mouse click SIDE BUTTON No 0 Hovering moving the cursor without clicking the mouse SIDE BUTTON No 1 Right mouse click SIDE BUTTON No 0 SIDE BUTTON No1 Pen tip You can use the StarBoard Software function to change the button settings For more details refer to the manual for the StarBoard Software in the bundled DVD ROM 85 Interactive Function continued Using StarBoard Software If you are using the StarBoard Software for the first time install it by following the instructions in the manual located inside the bundled DVD ROM For details on how to use the StarBoard Software and its functions refer to the bundled StarBoard Software DVD ROM manual The installation method is in the menu of DVD which runs automatically when inserted to your computer s drive as follows Browse Documents Software may lead you to a folder named in different languages Select your desired language and refer to the manual inside Before using this product please read all manuals for this product We will not be liable for any matters related to the applications and manuals NOTE The information in the DVD ROM is subject to change without notice e No responsibility is taken for any obstacle and defect to hardware and software of your computer as a result of the use of the DVD ROM e The pen is referred to as Electronic pen in
122. s the interval time set by this feature 110 When the OFF is chosen the message will not appear Utilize this feature to keep the air filter clean setting the suitable time according to your environment of this projector e Please take care of the filter unit periodically even if there is no message If the air filter becomes to be blocked by dust or other matter the internal temperature will rise which could cause malfunction or reduce the lifetime of the projector e Please be careful with the operating environment of the projector and the condition of the filter unit continued on next page 61 pttem escription KEY LOCK 1 Use the A F buttons to select CONTROL PANEL or REMOTE CONTROL 2 Use the lt gt buttons to turn the key lock function on off When ON is selected all buttons on the projector or remote control except the STANDBY ON button are locked e Please use this function to prevent tampering or accidental operation e It is not possible to set both CONTROL PANEL and REMOTE CONTROL to ON LENS DOOR LOCK Use the A V cursor buttons to turn on off the LENS DOOR LOCK function Set LENS DOOR LOCK to ON to keep the lens door open even when power is turned off Follow cautions below when you set LENS DOOR LOCK to ON and keep the lens door open all the time e Do not apply excessive force on or allow impact to the lens door SERVICE as it incorporates a mirror continued e Keep the projector out of t
123. s turns on off the AUTO ECO MODE ON amp OFF AUTO ECO MODE When ON is selected the projector will always be set to Eco mode at start up regardless of the ECO MODE 447 setting An OSD message AUTO ECO MODE will be displayed for tens of seconds when the projector starts with this function activated KEYSTONE _PERFECT FIT continued on next page 46 ltem escription O O O OO Using the A V buttons changes the eco mode setting NORMAL amp ECO ECO MODE e When the ECO is selected acoustic noise and screen brightness are reduced e When AUTO ECO MODE 446 is set to ON the projector will always be set to Eco mode at start up regardless this setting Using the A V buttons switches the mode for mirror status MIRROR NORMAL H INVERT V INVERT H amp V INVERT If the Transition Detector is on and MIRROR status is changed TRANSITION DETECTOR ON alarm 477 will be displayed when projector is restarted after the AC power is turned off is invalid and no signal is output from MONITOR OUT port in the standby mode While the image signal from the input port chosen in step 1 is projected the image signal from the input port selected in step 2 is output to MONITOR OUT port 1 Choose a picture input port using A V buttons Choose STANDBY to select the picture ggg z output in the standby mode a ee MONITOR OUT 2 Select one of the COMPUTER IN ports is using lt gt buttons use TPES S
124. se the A buttons to turn the AMX Device Discovery on off AMX D D Phe er AMX Device When ON is selected the projector can be detected by controllers Discovery of AMX connected to the same network For the details of AMX Device Discovery visit the AMX web site URL http www amx com as of Jun 2011 continued on next page 70 ltem scription O Selecting this item displays the PRESENTATION menu Use A V buttons to select one of the following items then press gt or ENTER button to use the function If you set a computer to the Presenter mode while its image is projected the projector is occupied by the computer and access from any other computer is blocked Use this function to quit the Presenter mode and QUIT allow other computers to access the projector PRESENTER Select this item to display a dialog MODE Press button to choose OK in the dialog The Presenter mode is cancelled and a message is displayed indicating the result e To make Presenter mode setting use LiveViewer For details see the section Presenter mode in the User s Manual Network Guide PRESENTATION If you set one or more computers to the Multi PC mode on LiveViewer and send their images to the projector you can select the display mode on the projector from two options below Single PC mode displays the image of the selected MULTI PC computer on full screen MODE Multi PC mode displays the images sent
125. sure that the screws are screwed in firmly Loose screws could result in damage or injury e Use only the lamp of the specified type Use of a lamp that does not meet the lamp specifications for this model could cause a fire damage or shorten the life of this product e If the lamp breaks soon after the first time it is used it is possible that there are electrical problems elsewhere besides the lamp If this happens consult your local dealer or a service representative e Handle with care jolting or scratching could cause the lamp bulb to burst during use e Using the lamp for long periods of time could cause it dark not to light up or to burst When the pictures appear dark or when the color tone is poor please replace the lamp as soon as possible Do not use old used lamps this is a cause of breakage Cleaning and replacing the air filter The air filter unit of this projector consists of a filter cover two kinds of filters and a filter frame The new double large filters system is expected to function longer However please check and clean it periodically to keep ventilation needed for normal operation of the projector When the indicators or a message prompts you to clean the air filter comply with it as soon as possible Replace the filters when they are damaged or too soiled To prepare new filters make contact with your dealer and tell the following type number Type number UX37191 Filter set When you replace th
126. t the MENU press the MENU button The MENU you last used EASY or ADVANCED will appear EASY MENU has priority to appear just after powered on In the EASY MENU i EASY MENU z SELECT 1 Use the A V cursor buttons to select an item to A Doon sa0 08 operate If you want to change it to the ADVANCED wpurwecrrn EYECUTE MENU select the ADVANCED MENU O MRROR NORMAL 2 Use the lt gt cursor buttons to operate the item FILTERT C In the ADVANCED MENU becin EA 1 Use the A V cursor buttons to select a menu S NODE ee If you want to change it to the EASY MENU eA can DEFAULT select the EASY MENU SETUP COLOR 0 The items in the menu appear on the right side oPriy e PRESENTATION 2 Press the cursor button or ENTER button to E EASY MENU EXIT COMPUTER IN 1 1280 x 800 60Hz move the cursor to the right side Then use the A V cursor buttons to select an item to operate and press the gt cursor button or ENTER button to progress The operation menu or dialog of the selected item will appear 3 Use the buttons as instructed in the OSD to operate the item continued on next page 30 Using the menu function continued 3 To close the MENU press the MENU button again or select EXIT and press the lt cursor button or ENTER button Even if you do not do anything the dialog will automatically disappear after about 30 seconds e If you want to move the menu position use the cursor buttons after pr
127. te control has the two choices on signal eats eaten frequency Mode 1 NORMAL and Mode 2 HIGH If the remote control e does not function properly attempt to change the signal frequency F Ee In order to set the Mode please keep pressing the combination of 2 A 5005INQ two buttons listed below simultaneously for about 3 seconds esee 1 Set to Mode 1 NORMAL VOLUME and RESET buttons Ce 2 Set to Mode 2 HIGH MAGNIFY OFF and ESC buttons Please remember that the REMOTE FREQ in the SERVICE item of the OPTION menu 163 of the projector to be controlled should be set to the same mode as the remote control Using as a simple PC mouse amp keyboard The accessory remote control works as a simple mouse and keyboard of the computer when the projector s USB TYPE B port and the computer s type A USB port are connected and MOUSE is selected for the USB TYPE B item in the OPTION menu 457 PAGE UP key Press PAGE UP button PAGE DOWN key Press PAGE DOWN button Mouse left button Press ENTER button Move pointer Use the cursor buttons A V lt and gt USB TYPE B ESC key Press ESC button port 1 2 3 4 5 6 Mouse right button Press RESET button NOTE When the simple mouse amp keyboard function of this product does not work correctly please check the following e When a USB cable connects this projector with a computer having a built in pointin
128. tempting to use this feature A dark picture may still be incorrectly adjusted Use a bright picture when adjusting For a video signal and s video signal The video format best suited for the respective input signal will be selected automatically This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu 42 The vertical position and horizontal position will be AUTO ADJUST automatically set to the default For a component video signal PAEGHEE The vertical position and horizontal position will be automatically set to the default The horizontal phase will be automatically adjusted e The automatic adjustment operation requires approx 10 seconds Also please note that it may not function correctly with some input e When this function is performed for a video signal a certain extra such as a line may appear outside a picture e When this function is performed for a computer signal a black frame may be displayed on the edge of the screen depending on the Computer model e The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu 67 40 INT AO menu From the INPUT menu items shown in the table E ADAD EN Chas below can be performed E PICTURE 2 VIDEONE uo Select an item using the A V cursor buttons and INOT VIDEO FORMAT press the cursor button or ENTER button to gt E execute the it
129. to AUTO and the projector recognizes that it receives video signals 36 continued on next page pttem escription Using the lt gt buttons adjusts the sharpness Weak Strong e There may be some noise and or the screen may flicker for a moment when an adjustment is made This is not a malfunction SHARPNESS Using the A V cursor buttons changes the active iris control mode PRESENTATION amp THEATER amp OFF Se ___ PRESENTATION The active iris displays the best presentation ACTIVE IRIS image for both bright and dark scenes THEATER The active iris displays the best theater image for both bright and dark scenes OFF The active iris is always open e The screen may flicker when the PRESENTATION or THEATER modes are selected If this occurs select OFF This projector has 4 memories for adjustment data for all the items of the PICTURE menu Selecting a function using the A V buttons and pressing the or ENTER button performs each function eee SAVE 2 SAVE 3 SAVE 4 LOAD 4 LOAD 3 LOAD 2 LOAD 1 SAVE 1 SAVE 2 SAVE 3 SAVE 4 Performing a SAVE function saves the current adjustment data into the memory linked in the number included in the function s name e Remember that the current data being stored of a memory will be lost by saving new data into the memory MY MEMORY LOAD 1 LOAD 2 LOAD 3 LOAD 4 Performing a LOAD function loads the data from the memory linked in the number included
130. to the projector That may be required by EMI regulations Neither disassemble nor modify the projector and the accessories Do not use the damaged accessory Be careful not to damage the accessories Route a cable so that it is neither stepped on nor pinched out 4 CAUTION P amp Do not turn on or off the projector while connected to a device in operation unless that is directed in the manual of the device Otherwise it may cause malfunction in the device or projector gt Be careful not to mistakenly connect a connector to a wrong port Otherwise it may cause malfunction in the device or projector When connecting a connector to a port make sure that the shape of the connector fits the port Tighten the screws to connect a connector equipped with screws to a port Use the cables with straight plugs not L shaped ones as the input ports of the projector are recessed continued on next page Connecting with your devices continued About Plug and Play capability e Plug and Play is a system composed of a computer its operating system and peripheral equipment i e display devices This projector is VESA DDC 2B compatible Plug and Play can be used by connecting this projector to a computer that is VESA DDC display data channel compatible Take advantage of this feature by connecting a computer cable to the COMPUTER IN1 port DDC 2B compatible Plug and Play may not work properly if any other type of connection
131. ton on the remote control BLANK button The BLANK screen will be displayed instead of the screen of input signal Please refer to BLANK item in SCREEN menu 050 To exit from the BLANK screen and return to the input signal screen press BLANK button again MY SOU CE Ol VIDEO COMPUTER DOC CAM RA ASPECT AUTO SEARCH ANK MAGNIFY PAGE VOLUME FREEZE UP OFF DOWN KEYSTON FOCUS gt D ZOOM e The projector automatically exits from the BLANK mode when some control buttons are pressed NOTE The sound is not connected with the BLANK screen function If necessary set the volume or mute first To display the BLANK screen and mute the sound at one time use AV MUTE function L60 29 Using the menu function This projector has the following menus INTERACTIVE PICTURE IMAGE INPUT SETUP AUDIO SCREEN OPTION NETWORK SECURITY and EASY MENU EASY MENU consists of functions often used and the other menus are classified into each purpose and brought together as the ADVANCED MENU Each of these menus is operated using the same methods While the projector is displaying any menu the MENU button on the projector works as the cursor buttons The basic operations of these menus are as follows MENU INPUT STANDBY ON ENTER button MENU button POWER Focus 9 Cursor buttons TEMP LAMP MENU buttons Cursor buttons ESC button RESET button 4 To star
132. ton to display a menu 2 Point at the ADVANCED MENU in the menu using the V A button then press the gt button 3 Point at the OPTION in the left column of the menu Handle Oo using the V A button then press the gt button 4 Point at the LAMP TIME using the button then press the gt button A dialog will appear 5 Press the gt button to select OK on the dialog It performs resetting the lamp time 2S SS NOTE Please reset the lamp time only when you have replaced the lamp for a suitable indication about the lamp 101 Replacing the lamp continued Lamp warning A HIGH VOLTAGE A HIGH TEMPERATURE HIGH PRESSURE AWARNING gt The projector uses a high pressure mercury glass lamp The lamp can break with a loud bang or burn out if jolted or scratched handled while hot or worn over time Note that each lamp has a different lifetime and some may burst or burn out soon after you start using them In addition if the bulb bursts it is possible for shards of glass to fly into the lamp housing and for gas containing mercury and dust containing fine particles of glass to escape from the projector s vent holes gt About disposal of a lamp This product contains a mercury lamp do not put itin a trash Dispose of it in accordance with environmental laws e For lamp recycling go to www lamprecycle org in the US e
133. tor Make sure that the computer can detect a plug and play 10 displayed project the picture input to the port Otherwise select other port for picture input The projector does not recognize the USB storage device inserted into USB TYPE A port Use the REMOVE USB function first remove the USB storage device and then insert it into the port again Before removing the USB storage device be sure to use the REMOVE USB function on the thumbnail screen which appears when the USB TYPE A port is selected as the input source Waiting for connection remains displayed even though the USB TYPE B port is selected 10 Remove the USB cable and reconnect after a while continued on next page 114 Phenomena that may be easy to be mistaken for machine defects continued Cases not involving a machine defect patti Video screen The FREEZE function is working 29 display freezes Press FREEZE button to restore the screen to normal Color settings are not correctly adjusted Colors havea Perform picture adjustments by changing the COLOR TEMP COLOR faded out TINT and or COLOR SPACE settings using the menu functions appearance or Color tone is COLOR SPACE setting is not suitable poor Change the COLOR SPACE setting to AUTO RGB SMPTE240 REC709 or REC601 The brightness and or contrast are adjusted to an extremely low level Adjust BRIGHTNESS and or CONTRAST settings to a higher level using the menu function
134. ttons adjusts the over scan ratio Small It magnifies picture Large It reduces picture e This item can be selected only for a video s video and component video signal OVER SCAN e For an HDMI signal this item can also be selected if either 1 or 2 applies 1 HDMI FORMAT item in the INPUT menu is set to VIDEO 2 HDMI FORMAT item in the INPUT menu is set to AUTO and the projector recognizes that it receives video signals continued on next page 38 pttem escription Using the lt gt buttons adjusts the vertical position Down Up e Over adjusting the vertical position may cause noise to appear on the screen If this occurs please reset the vertical position to the default setting Pressing the RESET button when the V POSITION V POSITION is selected will reset the V POSITION to the default setting e When this function is performed on a video signal or an s video signal the range of this adjustment depends on OVER SCAN 438 setting It is not possible to adjust when OVER SCAN is set to 10 e This function is unavailable for a signal from the LAN USB TYPE A USB TYPE B or HDMI port Using the lt gt buttons adjusts the horizontal position Right Left e Over adjusting the horizontal position may cause noise to appear on the screen If this occurs please reset the horizontal position to the default setting Pressing the RESET button when the H POSITION is H POSITION selected will reset the H P
135. urned The projector is cooling down In Orange off off Please wait Blinking In Red Blinking In Red or Lighting In Red Blinking In Red or Lighting In Red Blinking In Red or Lighting In Red discre tionary Lighting In Red Blinking In Red discre tionary Blinking In Red continued on next page The projector is cooling down A certain error has been detected Please wait until POWER indicator finishes blinking and then perform the proper measure using the item descriptions below The lamp does not light and there is a possibility that interior portion has become heated Please turn the power off and allow the projector to cool down at least 20 minutes After the projector has sufficiently cooled down please make confirmation of the following items and then turn the power on again e Is there blockage of the air passage aperture e Is the air filter dirty e Does the peripheral temperature exceed 35 C If the same indication is displayed after the remedy please change the lamp referring to the section Replacing the lamp The lamp cover has not been properly fixed Please turn the power off and allow the projector to cool down at least 45 minutes After the projector has sufficiently cooled down please make confirmation of the attachment state of the lamp cover After performing any needed maintenance turn the power on again If the same indication is displayed after the re
136. uter the DISPLAY n image is sent USER NAME YOY can set user names for each computer on LiveViwer For details see the section Display User Name in the User s Manual Network Guide continued on next page 72 ltem escription O Selecting this item displays the NETWORK_INFORMATION dialog for confirming the network settings NETWORK_INFORMATION PASSCODE 0000 0000 0000 PROJECTOR NAME Projector _Name IP ADDRESS 192 168 1 254 SUBNET MASK 255 255 255 0 DEFAULT GATEWAY O 0 070 DNS SERVER O 0 8h MAC ADDRESS FF FF FF FF FF FF TIME DIFFERENCE GMT 00 00 DATE AND TIME 2000 1 1 0 00 Q RETURN J EXIT INFORMATION e For the details of PASSCODE see the section Selecting the network connection method in the User s manual Network Guide e Only the first 16 characters of the projector name are displayed e When the voltage level of the battery for the built in clock decreases the set time may become incorrect even though accurate date and time are input Replace the battery suitably 4105 e IP ADDRESS SUBNET MASK and DEFAULT GATEWAY indicate 0 0 0 0 when DHCP is ON and the projector has not gotten address from DHCP server Executing this item restarts and initializes the network functions Choose the RESTART EXECUTE using the button gt ay SERVICE RETURN Then use the button to execute SERVICE as NETWORK RESTART Network will be once cut o
137. very time the power is turned on There is no input signal COMPUTER IN 1 a i Please confirm the signal input connection and the status of the signal source The USB TYPE B port is selected as the picture input USB TYPE B source even if MOUSE is selected for USB TYPE B 157 USB DISPLAY Select USB DISPLAY in the dialog to project the picture input to the USB TYPE B port In this case you cannot use e Be Ee ees the simple mouse and keyboard function Otherwise select other port for picture input Projector is waiting for an image file Check the hardware connection settings on the projector and network related settings Yaiting for connection The computer Projector network connection might be ae cee disconnected Please re connect using Connect button of the LiveViewer Using the LiveViewer in the User s Manual Network Guide The horizontal or vertical frequency of the input signal is wae UNE not within the specified range SYNC IS OUT OF RANGE 123kHz 123Hz Please confirm the specs for your projector or the signal source specs C COMPUTER IN 1 An improper signal is input Please confirm the specs for your projector or the signal source Specs continued on next page 109 Related messages continued Message Description The internal temperature is rising Please turn the power off and allow the projector to cool down at least 20 minutes After having confirmed the foll
138. wn in the OPTION menu Pressing the RESET button on the remote control or the gt button of the projector displays a dialog To reset the lamp time select the OK using the gt button CANCEL gt OK e Please reset the lamp time only when you have replaced the lamp for a suitable indication about the lamp e For the lamp replacement see the section Replacing the lamp LAMP TIME 101 The filter time is the usage time of the air filter counted after the last resetting It is shown in the OPTION menu Pressing the RESET button on the remote control or the gt button of the projector displays a dialog To reset the filter time select the OK using the gt button CANCEL gt OK e Please reset the filter time only when you have cleaned or replaced the air filter for a suitable indication about the air filter e For the air filter cleaning see the section Cleaning and replacing the air filter 103 104 FILTER TIME continued on next page 58 ltem scription O O This item is to assign one of the following functions to MY BUTTON 1 2 on the remote control G6 1 Use the A V buttons on the MY BUTTON menu to select a MY BUTTON 1 2 and press the gt or ENTER button to display the MY BUTTON setup dialog 2 Then using the A W lt gt buttons sets one of the following functions to the chosen button Press the ENTER or INPUT button to save the setting e LAN Selects input f

Download Pdf Manuals

Related Search

Related Contents

MEDIUM Schulaktion 2011  nsa 1.26MB：2002.11.01  Instalación - Support Sagemcom  Hotpoint - ImageBank  dspblok™ 21369zx User Manual - Danville Signal Processing, Inc.  MANUAL DE USUARIO GESTIÓN Y MONITORIZACIÓN DE UNA  TELTONIKA ModemCOM/G10 (CM1100)  BU2002RWLG/BU3002RWLG/BU5002RWLG 無停電電源装置  Samsung DVD-P144 Εγχειρίδιο χρήσης  CC EMP5  

Copyright © All rights reserved. Failed to retrieve file