Home

DT Research DT372 2GB Black

1. Internal Battery Switch Battery and Power Meter back panel Wireless Network Settings Button Management Input Output Ports Q DC Power Input Headphone Jack Microphone Jack USB Ports 2 Button Functions with Windows XP Operating System Programmable Programmable launch soft on screen keyboard default Launch SAS Secure Attention Sequence Generate Ctrl Alt Del keys to invoke the security windows defined under Windows XP Programmable Change display orientation portrait landscape default Programmable system utility menu default As scanner trigger when equipped with the scanner module Push release typically enters Standby mode or Push release exits Standby mode or restarts device software dependent Q Programmable Push and hold over 4 seconds invokes hardware shutdown Power Battery LED Status e Blue indicates the battery is 25 to 100 charged e Blinking blue indicates the battery is charging e Orange indicates that the battery is between 11 to 25 e Blinking Orange indicates that the battery is below 10 Precautions e Always exercise care when operating and handling the DT312 e Do NOT apply excessive pressure to the display screen e We recommend using the Stylus provided to keep the screen clean Avoid prolonged exposure of the display panel to any strong heat source Wherever possible the DT312 should f
2. DT312 SPECIFICATIONS System Processor Intel Atom Z530 1 6GHz Memory RAM 2GB DDR2 533MHZ Storage 2GB to 16GB Flash or 32GB 64GB SSD Microsoft Windows Embedded Standard 7 Windows 7 Professional Windows XP Embedded Windows XP Pro for Embedded Systems or Linux Operating Systems 10 4 LED backlight screen with resistive touch sunlight readable option 1024 x 768 XGA Network Interface Wi Fi 802 11a b g n Bluetooth 2 1 with EDR Control Switch and Buttons 1 power button 7 front buttons and 1 trigger button 1 power battery status LED and 1 WLAN active LED 1 DC in Jack 2 USB 2 0 port Input Output Ports 1 Headphone out Jack 1 Microphone in Jack WPA Personal WPA2 Personal WPA Enterprise WPA2 Enterprise AES CCMP 128 bit WEP 128 bit and 64 bit 802 1X EAP SIM LEAP PEAP TKIP EAP FAST EAPTLS EAP TTLS Display Display Resolution Security Power Optional External 7 4V 3760mAh or 7 2V 3900mAh Mechanical Enclosure ABS PC plasses and magnesumaluminum aloy weee 20505 Environmental Humidity 0 90 non condensing Specifications subject to change without notice DT Research Inc 2000 Concourse Drive San Jose CA 95131 http www dtresearch com DT Resea rc h Copyright 2012 DT Research Inc All Rights Reserved DT Research is registered trademark of DT Research Inc BOG011712DT312ENG arch MUU RE DT Researc DT312 BASIC OPERATION GU
3. IDE INTRODUCTION Thank you for acquiring the latest addition to DT Research s line of tablet devices the DT312 Featuring a slim yet robust enclosure the two pound DT312 with 10 4 TFT display is powered by the Intel Atom processor offering optimal combinations of performance and power savings An external battery expansion option provides approximately 3 4 hours of additional battery operation for up to six hours of mobile usage The DT312 is available in Microsoft Windows Embedded Standard 7 Windows 7 Professional Windows XP Embedded Windows XP Pro for Embedded Systems or Linux operating systems Each software operating system features web browser client server computing software media player accessories and applications support PACKAGE CONTENTS e One DT312 with Internal Battery Pack 2200mAh Stylus Grips and Screen Cover e AC DC Power Adapter with Power Cord e Basic Operation Guide Major options depending on configuration e Desktop Charging Cradle with DC in Power Jack and Ethernet USB and optional VGA Ports e External Battery Pack e Internal High Capacity Battery 3760mAh e External Battery Charger Kit If your DT312 contains MSR camera or scanner module please refer to the POS module operation guide for detailed operation The DT312 with Windows XP For locking the MSR module Stylus Windows Battery Power LED Q Wireless LED Calibration
4. ace away from direct light to reduce glare If the AC DC power adapter is used to recharge or power the device do NOT use any AC DC adapter other than the one provided with the device or acquired from the manufacturer or its partners In the unlikely event that smoke abnormal noise or strange odor is present immediately power off the DT312 and disconnect all power sources Report the problem to your device provider immediately e Never attempt to disassemble the DT312 as this will void the warranty THE DT312 Basic Features The DT312 wireless tablet integrates a bright and responsive touch display two USB ports and embedded networking elements such as wireless LAN and Bluetooth or optional 3G The primary device is complemented by a suite of accessories including battery expansion charging cradles and battery charger kit for a comprehensive user experience A DT312 typically integrates an 802 11a b g n wireless LAN WLAN adapter that may connect to other wireless devices or access points If your DT312 does not come with such a network adapter please consult your device provider to establish the desired network connectivity OPERATION Internal Battery Switch To prevent battery drain during shipping and extended storage the internal battery may be disconnected off To connect the internal battery push the battery button switch on the back panel to the up position see page 2 for photo The internal battery p
5. ack has to be connected for it to operate be charged and for the optional external battery pack to function Powering ON and OFF To activate the DT312 push and quickly release the Power Button The display will come on ina few seconds To put the DT312 in Standby mode push and quickly release the Power Button To turn the DT312 off for extended storage power off the device safely using any software function that shuts down computer provided in the software operating system NOTE The battery packs shipped with your device may be low in power please use the AC DC adapter with the DT312 when setting up the device for the first time to fully charge the internal battery pack You may charge the external battery pack with it attached to the DT312 or with the optional external battery charger kit NOTE When the battery pack s is are charging the blue colored Battery LED should blink slowly If plugging in the AC DC adapter does not trigger this blinking activity and the LED stays dark the battery pack s may have been drained substantially Try unplugging replugging the AC DC adapter to the DT312 a few times to activate the charging process NOTE To conserve power use push and quick release the Power Button to put the device in Standby mode while not in use Pushing briefly on the same button will wake up the system within seconds NOTE Avoid using the Power Button hold 4 seconds feature to turn off the devi
6. ce this form of hardware shutdown is intended to be a means of recovery from device lockups and not as normal operation Start Up If the power up from Standby or otherwise is successful the appropriate interface will be displayed after a launch sequence of several seconds The wireless LAN connection may take 10 15 seconds to be established Configuring the DT312 The device may be configured using the utilities and methods dictated by the software operating system The DT312 should be configurable for various properties such as user profiles network features and several system elements Calibration The touch display for the DT312 is calibrated before shipping In the event that the calibration has been modified or is unsatisfactory the respective calibration routines e g PenMount PM for Windows XP to calibrate the touch interface may be used Such applications are typically executed through touch input via Stylus or through mouse click via a USB mouse Wireless Networking Wireless LAN The DT312 is often delivered with an embedded user inaccessible 802 11a b g n WLAN adapter equipped with a hidden custom antenna e Through the support of typical WLAN adapters the DT312 should be able to detect all 802 11 access points in the vicinity for you to select the access point of your choice for connection e The SSID and WEP WPA WPA2 if enabled parameters on the DT312 and the access points have to match The SSID is case s
7. dle while the DT312 is docked to the Cradle USING THE DT312 Memory configuration The DT312 is available with 2GB memory configuration Storage options currently range from 2GB to 16GB flash memory or 32GB to 64GB SSD Peripherals Support Through its USB ports the DT312 supports a wide range of USB based peripherals These peripherals are applicable for software installation applications storage data storage and system software recovery and updates The DT312 is also compatible with custom mountable cradle options These securable and mountable cradles provide an interface to VESA mounts and arms and to ports that may include USB Ethernet and pass through power Remote Management Depending on software configuration the DT312 can be centrally managed for asset monitoring and for software control Please consult your device provider Federal Communication Commission Interference This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur ina particular installation If this equipment do
8. ensitive and it is recommended that you enable WEP WPA WPA2 encryption or advanced alternatives for secure access e When WEP WPA WPA2 is enabled you may need to consult your network admin istrator or your networking equipment literature to properly configure associated settings such as Authentication mode etc e Refer to the access point operating manuals for setting up the 802 11 access points Bluetooth The DT312 features a built in Bluetooth adapter that operates on the Microsoft Windows Bluetooth protocol The Bluetooth configuration application is invoked from the System Tray or from the Control Panel for Windows XP Follow the instructions and options provided within the application to configure and invoke Bluetooth connectivity with the corresponding peripherals NOTE Bluetooth devices or accessories that are not compatible with the Microsoft Windows Bluetooth protocol may not work with the DT312 Button Management Where supported by software many of the hard buttons on the DT312 are programmable to perform a function of the user s choice The exception is the Power Button and the SAS Button To activate the button re assignment application invoke the Button Manager application e g in Windows XP Embedded i Brightness Control Where supported by device firmware and software a hard button may be engaged to manipulate the display brightness Press the System Menu button Button 7 on the front of the DT312 The Sys
9. es cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This device and its antenna s must not be co located or operating in conjunction with any other antenna or transmitter This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada
10. tem screen will display a Brightness control section with up and down arrows that can be activated with the stylus Battery and Power Management The DT312 is equipped with an internal 2200mAh Li lon battery pack that is capable of supporting approximately 1 5 2 hours of continuous operation With the optional internal 3760mAh battery and an external battery pack that clips hot pluggable onto the back of the device the maximum period of continuous operation will be approximately 3 4 hours The period between battery recharges can be significantly lengthened by putting the device into Standby mode through the Power Button see Buttons Function Table whenever the device is not in use Depending on the operating software the DT312 may also be configured to enter various power saving modes via the Power Button or through timed entry Desktop Cradle The DT312 is complemented by an optional Desktop Cradle for support pass through charging and connection to a range of USB peripherals including keyboard and mouse The Cradle offers the following interfaces a DC in port for the AC DC adapter an Ethernet port a VGA port optional and USB ports Always seat the DT312 securely onto the cradle The cradle must be powered by the AC DC adapter for the Ethernet and USB ports to function The battery packs on the DT312 may be recharged by connecting the AC DC adapter directly to the DC in port on the DT312 or through the DC in port on the Desktop Cra

DT Research DT372 2GB Black

Contents

Download Pdf Manuals

Related Search

Related Contents