APart PC1000R AV receiver
Contents
1. EDapts MANUAL PC1000R ElDapts Features The APart PC1000R is a professional multisource CD USB SD card music player equipped with balanced and unbalanced analog outputs coaxial and optical digital outs and a RS232 port for use in automated systems The maximum analog output level can be preset at the back to match the output level of other audio sources such as tuners and other media players The unit can be controlled by the front panel buttons infrared remote included infrared remote extender such as PIR REC optional or RS232 commands A list with the commands is included in this manual WWW APART AUDIO COM CPapt Front panel Power led this led lights up red when in standby and becomes blue when the unit is powered on CD drawer Infrared eye and display showing playback status tracknumber and time information Stop button press to stop playback Play pause push to start playback push again to pause playback Fast backward push once to search backwards Push again to resume normal playback Fast forward push once to search forwards Push again to resume normal playback CD eject push to open CD drawer push again to close Please note that the play button will also close the drawer 9 Standby push to switch the unit into standby mode indicated by the power led lighting red 10 Next track push to switch to the next track 11 Previous track push to go back one tr2. Remote control battery type AAA type LRO3 Operating temperature 10 40 C Relative humidity 10 to 80 non condensing INFO APART AUDIO COM aprte Important safety instructions e Please check the carton box for any kind of damage on reception of the goods In case of a damaged carton please contact your dealer before opening the carton e Read all documentation before operating your equipment e Keep all documentation for future reference e Save the carton and packing material even if the equipment has arrived in good condition e Should you ever need to ship the unit use only the original factory packing e Do not spill water or other liquids into or on the unit e Make sure power outlets conform to the power requirements listed on the back of the unit e Do not use the unit if the electrical power cord is frayed or broken e Always operate the unit with the AC ground wire connected to the electrical system ground e Have gain controls on amplifiers turned down during power up to prevent speaker damage if there are high signal levels at the inputs e Do not connect the inputs outputs of amplifiers or consoles to any other voltage source such as a battery mains source or power supply regardless of whether the amplifier or console is turned on or off e Power down amp disconnect units from mains voltage before making connections e Do not use the unit near stoves heat registers radiators or other heat producing devices
3. e Do not remove the cover Removing the cover will expose you to potentially dangerous voltages e Do not drive the inputs with a signal level higher than that required to drive equipment to full output e In case of mal function this device should be serviced by qualified service personnel only Company names product names and names of formats etc are the trademarks or registered trademarks of their respective owners O 2010 APart Audio specifications subject to change without notice CEX WWW APART AUDIO COM
4. ack 12 Repeat push to switch between repeat 1 repeat one track or repeat all Push again to resume normal playback 13 Random push to switch to random playback Push again to resume normal playback 14 USB SD CD push to switch between USB SD or USB playback Default source is CD but when no CD is present the unit will automatically search for media on the SD and USB slots Please note that it may take a while for the unit to react when switching sources This is not a malfunction and depends on the amount of data present on the selected media 15 SD card slot 16 USB slot 17 Power switch 18 Removable rackears for use in 19 inch racks or as a standalone unit in hifi chains etc ANOnABRWN INFO APART AUDIO COM ElDapts Rear panel DIGITAL OUTPUTS OPTICAL COAMAL Right channel balanced output The maximum level can be set with level knob 4 Left channel balanced ouput The maximum level can be set with level knob 4 Unbalanced output on cinch connectors The maximum level can be set with level knob 4 Level knob to preset the maximum output level on the analog outputs Update don t connect anything here Optical digital output on Toslink Output format is SPDIF 16 bits 44 1 kHz sampling rate Coaxial digital output on cinch Output format is SPDIF 16 bits 44 1 kHz sampling rate USB slot this is a copy of the front USB slot use the front or the rear slot not both simultaneous
5. aying Source medium is present PC gt STATUS displays the status of the PC1000R gt Device CD Player gt MP3 030 gt Status Play gt Time 03 18 Important notice always allow the unit to acclimatize during at least one hour E g when the unit has been transported in cold weather conditions the electronics and optical devices inside the unit might condensate causing malfunction or even permanent damage to the unit Please note that the unit may respond slowly when you change the input source This depends on the size and number of files present on the media WWW APART AUDIO COM CPapt Technical Specifications SG nT Compatible media Audio CD CDR CDRW DVD DVDR DVDRW Audio format Audio CD 16 bit PCM MP3 32 320 kbps and variable bitrate WMA ID3 tags are not supported USB SD hae Compatible media Flash memory sticks and cards 32 Mb up to 32 GB File system recognized is FAT32 Some memory sticks and cards may not work because they don t allow direct memory access ID3 tags are not supported Line level output balanced amp unbalanced Sigil Spite alice Coa 430 482 x 305 315 x 44 mm Netweight Shipping weight Mains power cable IR remote control unit RS232 port Standard RS232 port on DB9 connector RS232 port setting fixed 38400 baudrate 8 databits no parity handshake off nfrared extension port Mini jack connector at the rear disables the front infrared receiver
6. command such as PLAY STOP commands are not case sensitive Some commands require an attribute such as TRACK where stands for a numeric value in this case the track number The unit needs no carriage return lt CR gt at the end of the instruction From here we assume that you are familiar with RS232 communication protocols and hardware If not please read the user manual of your control device first In case you are experiencing a problem with serial communication start at the basics connect a computer with a working serial port use the right serial cable use a simple terminal program make communication settings and start from there Please note that most commands sent from the infrared remote control will also be shown on the serial port This is the easiest way to find out whether your serial communication settings are correct Unknown characters in your terminal communication program usually indicate that the baudrate is incorrect Below is a table with the list of commands recognized by PC1000R and some examples of the replies sent by the PC1000R INFOOAPART AUDIO COM ElDapts RS232 COMMANDS COMMAND DESCRIPTION REPLY Fast fast backword search send again to resume normal play PC1000R gt Fast Play Backward TRACK stands for a numerical value from 1 to 255 note PC1000R gt Track 25 the space between TRACK and INPUT change between inputs CD USB SD valid only when a PC1000R gt Change Pl
7. ly SD card slot this is a copy of the front SD card slot use the front or the rear slot not both simultaneously 10 IR in infrared command input on stereo minijack Connect for example our PIR REC here Please note that the front IR eye will be disabled when a jack is inserted here 11 RS 232 port 12 Fuse holder contains a 500 mA slow blow fuse Replace only with a fuse of identical voltage and current rating 13 Mains cable inlet Notes the output level can also be adjusted during playback via the infrared remote or serial control commands This volume control is located before the master output level knob 4 on the rear of the unit After waking up from standby or after power up the volume level is automatically reset to the maximum as set by the rear volume knob WWW APART AUDIO COM CPapt RS232 communication Communication with PC1000R via RS232 is done with simple ASCII commands The port settings are 38400 baudrate 8 databits no parity handshake off These parameters can not be changed The physical connection is made with a straight through wired 9 pin serial cable NO null modem cable Maximum wire length depends on cable quality and influence caused by external interference Pin 2 TX data data transmission output Pin 3 RX data data transmission input Pin 5 GND ground connection Other pins are not used Serial commands used in PC1000R have been simplified and consist basically of a
Download Pdf Manuals
Related Search