Philips LED monitor with Digital TV tuner 231T1LSB
Contents
1. Product information is subject to change without notice For detailed product information go to www philips com support Supported display resolutions Computer formats e Resolution refresh rate e 640 x 480 60Hz 640 x 480 75Hz 800 x 600 60Hz 800 x 600 75Hz 1024 x 768 60Hz 1024 x 768 75Hz 1280 x 1024 60Hz 1440 x 900 60Hz 1600 x 900 60Hz 1680 x 1050 60Hz 1920 x 1080 60Hz_RB the best for 231T1L Video formats e Resolution refresh rate 4801 60Hz 480p 60Hz 576i 50Hz 5 6p 50Hz 720p 50Hz 60Hz 10801 50Hz 60Hz 1080p 50Hz 60Hz Tuner Reception Transmission e Antenna input 5ohm coaxial IEC75 DVB DVB Terrestrial DVB T MPEG4 e V system DVB COFDM 2K 8K PAL I B G D K SECAM B G D K L L e Video playback NTSC SECAM PAL e Tuner Bands Hyperband S channel UHF VHF 14 EN Remote control e Type 231T1L RC e Batteries 2 x AAA LRO3 type Power e Mains power 100 240V 50Hz e Off mode power lt 0 5W e Ambient temperature 5 to 40 degrees Celsius Supported TV mounts To mount the TV purchase a Philips TV mount or a VESA compatible TV mount To prevent damage to cables and connectors be sure to leave a clearance of at least 5 5 cm from the back of the TV DQ Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper T V mounting that r2. Philips Consumer Care The TV menu is in the wrong language e Change the TV menu to your preferred language When turning the TV on off to standby you hear a creaking sound from the TV chassis e No action is required The creaking sound Is normal expansion and contraction of the TV as it cools and warms up This does not impact performance TV channel issues Previously installed channels do not appear in the channel list e Check that the correct channel list is selected No digital channels were found during the installation e Check that the TV supports DVB T or DVB C in your country See the listed countries on the back of the TV Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the T V source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the T V e Loud speakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are c
3. To change the Teletext Press the SUBPAGE and gt Press A V button to select the subpage number button Features item To stop the automatic Press the HOLD button page change P Press OK button enter the Features sub To returnita the Prese the INDEX button item Teletext index page Ir the Teletext P the REVEAL button gt Press MENU button to exit the sub item information To display the Teletext Press the SUBTITLE subtitle button Telebext Language Common Interface Reset Dafauli Usi ng the Teletext To change different Press the one of four Teletext content buttons If the channel support Teletext mode means OO C2 C Teletext is provided user can open the page to Color key priority TOP gt watch some information FLOF gt Favorite page gt Support Teletext 1 5 Default color key Teletext contents follow broadcast contents change Country will not affect the Teletext contents Teletext display full screen Teletext page number show in left up corner if have several subpage will show in up line current subpage number show in right up corner The key teletext button will be handled by Teletext and MHEG5 component In MHEGS when no teletext is transmitted it depends on MHEG 5 application normally it displays EN 21 English Using the EPG This system has an Electronic Program Guide EPG to help your navigation through all the possible viewing options The EPG s
4. place the TV on a surface covered by a cloth or other material that can be pulled away e Ensure that no part of the T V hangs over the edge of the surface e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of overheating Never install the TV in a confined space Always leave a space of at least 4 inches around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Risk of damage to the T V Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the T V Never connect the T V to the power outlet if the voltage is different Risk of injury fire or power cord damage Never place the TV or any objects on the power cord To easily disconnect the T V power cord from the power outlet ensure that you have full access to the power cord at all times When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable e Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time e Ifthe TV is transported in temperatures bel
5. 4 TV ANTENNA Signal input from an antenna cable or satellite 750 TV ANTENNA iem 5 AV OUT VIDEO OUT and AUDIO OUT L R Audio and video output to analogue devices such as another T V or a recording device 6 SPDIF OUT Digital audio output to home theatres and other digital audio systems SPDIF OUT 7 HDMI Digital audio and video input from high definition digital devices such as Blu ray players Connections via DVI or VGA require an additional audio cable EN English 2 AUDIO L R Audio input from analogue devices connected to VIDEO Side connector COMMON INTERFACE 3 VIDEO Composite video input from analogue devices such as VCRs 1 COMMON INTERFACE Slot for a Conditional Access Module CAM COMMON INTERFACE 4 SERVICE USB port for upgrade firmware purpose only SERVICE 4 Controls Remote control a o gt English Front and side controls 1 POWER Switches the TV on or off The TV is not powered off completely unless it is physically unplugged D SOURCE Selects connected devices 3 MENU OK Displays the on screen menu and confirms a selection in menus 4 CH Switches to the next or previous channel 5 VOL Increases or decreases volume 6 Power indicator R
6. Register your product and get support at www philips com welcome 4 E i 7 P 4 5 7 4 7 3 T T7 7 a P A E DI Wr P Y n i Y 3l aie EN User Manual 231T1L PHILIPS English Country Austria Belgium Denmark Finland France Germany Greece lreland Italy Luxembourg The Netherlands Norway Poland Portugal Spain Sweden Switzerland United Kingdom Code 43 32 45 358 33 49 30 353 39 352 31 47 48 351 34 46 41 44 Telephone number 0810 000206 078 250851 3525 8761 09 2290 1908 082161 1658 01803 386 853 00800 3122 1223 01 601 1161 840 320 041 26 84 30 00 0900 0400 063 2210 8250 0223491505 2 1359 1440 902 888 785 08 632 0016 02 2310 2116 0207 949 0069 Tariff 0 07 0 06 Local call tariff Local call tariff 0 09 0 09 Free of charge Local call tariff 0 08 Local call tariff 0 10 Local call tariff Local call tariff Local call tariff 0 10 Local call tariff Local call tariff Local call tariff This information is correct at the time of press For updated information see www philips com support Contents Notice Important The most updated user manual on line 4 3 Get started and connect your devices6 Back connector Side connector Controls Front and side controls Remote control Start to use Switch your TV on off or to standby Switch channel
7. Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty E e Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging EN 29 English PHILIPS S Version M1DTVE3T 2011 Koninklijke Philips Electronics N V All rights reserved Specifcations are subject to change without notice Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N V and are used under license from Koninklijke Philips Electronics N V www philips com
8. cked channels and input source will temporarily un lock After powering off and on the TV set the un locked channels will be locked again gt Press A V button to select the channel P Press OK button to set A checked channel Is a block one When user not input password to un lock any channels and input source press OK button to lock unlock the channel in Parental Menu the screen will lock unlock in real time When user input correct password in the password dialog to temporarily un locked and not powering off and on the TV set during this period press OK button to lock unlock the channel in Parental Menu the screen will not lock unlock in real time Parental Guidance A Estes rid P This function operates according to information from the broadcasting station P Therefore if the signal has no this information this function does not operate P Prevent children from watching adult s TV programs by the rating limit set Age Rating To adjust the age rating based on age None 4 5 6 7 9 9 10 11 12 13 14 15 16 17 and 18 Input Block COR sa gt Set Ei xk To lock an input source Default value is non block nput source with a lock icon input source A blocked input source can be un locked temporarily after key in the correct password M Press the OK button to display the password dialog Press the 0 9 buttons to key in the
9. correct password All input source and locked channels will temporarily un lock e After powering off and on the TV set the un locked input source will be locked again gt Press A V button to select the input source P Press OK button to set A checked icon is a block one When user not input password to un lock any channels and input source press OK button to lock unlock the input source in Parental Menu the screen will lock unlock in real time When user input correct password in the password dialog to temporarily un locked and not powering off and on the TV set during this period press OK button to lock unlock the input source in Parental Menu the screen will not lock unlock in real time is a blocked EN 23 English Set Password Ext B To change the password he default password is 0000 Input a 4 digit password Be sure to remember this number Re enter new password for confirm Clean All e To reset all parental control settings to the default values A confirm diagram displays before execute Are you sure OAD update If using digital broadcast your TV would automatically receive software updates When it Is active you will receive a message on your screen asking you to update your software Just follow the instruction on the message to make your choice and complete the settings 24 EN 9 Pixel policy Philips strives to deliver the highest qua
10. dicator switches off r3 Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time disconnect the T V power cable from the power outlet Note e f you cannot locate your remote control and want to switch on the TV from standby press CH at the side of the TV Switch channels oe O CO CO CO 5 ss se ec e Press CH v on the remote control or CH on the side of the TV e Enter a channel number using the Numeric buttons e Use the channel grid Note When you use a favourite list you can only select those channels in the list Watch connected devices Note Switch on the device before selecting it as a source on the TV Use the source button POWER Press SOURCE L gt he source list appears 2 Press the SOURCE A or V buttons to select a device J Press OK to confirm your choice L gt The sI V switches to the selected device L gt he TV switches to the selected device Adjust TV volume MA ea rom em m mma m mt mk S To increase or decrease volume Press VOL on the remote control Press VOL on the side of the T V To mute or unmute sound Press K to mute the sound Press X again to restore the sound EN 13 English 6 Product information
11. disposed of with normal household waste Please inform yourself about the local rules on the separate collection of batteries The correct disposal of batteries helps prevent potentially negative consequences for the environment and human health The most updated user manual on line The contents of the user manual are subject to change Please refer to www philips com support for the most updated user manual info reference EN 5 English 3 Get started and connect your devices Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start Note Different types of connectors may be used to connect a device to your TV depending on availability and your needs Back connector EXT 1 SCART 750 ae TV ANTENNA CO PC IN VGA and AUDIO IN Audio and video input from a computer EXT 2 Y Pb Pr and AUDIO L R Analogue audio and video input from analogue or digital devices such as DVD players or game consoles 3 EXT 1 SCART Analogue audio and video input from analogue or digital devices such as DVD players or game consoles EXT 1 SCART COCO LEEEEETTTT CTT TTT TT Y LE
12. e to pixel defects during the warranty period a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables EN 25 English BRIGHT DOT DEFECTS ACCEPTABLE LEVEL MODEL 1 lit subpixe 2 adjacent lit subpixels 3 adjacent lit subpixels one white pixel Sooo O BLACK DOT DEFECTS ACCEPTABLE LEVEL MODEL 231T1L plus 2 adjacent dark subpixels 3 adjacent dark subpixels NENNEN NENNEN 1 dark subpixel TOTAL DOT DEFECTS ACCEPTABLE LEVEL MODEL 231T1L plus Total bright or black dot defects of all types Ih 1 or 2 adjacent sub pixel defects 1 dot defect The monitor is ISO9241 307 compliant 26 EN 10 Troubleshooting This section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected The remote control is not working properly e Check that the remote control batteries are correctly inserted according to the orientation e Replace the remote control batteries if they are flat or weak e Clean the remote control and TV sensor lens The standby light on the TV blinks red e Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact
13. ed LED In standby mode or off PHILIPS Green LED Power on EN 9 CO amp OGOH y GO Standby On e Switch the TV to standby if the TV Is on e Switch the TV on if the TV is in standby 0 9 Numeric buttons Select a channel or setting PRE CH Return to the previously viewed channel TV Press to choose TV mode PC Press to choose PC mode x Mute Switch the sound On or Off CH A V Channel A V Switch to the next or previous channel ZOOM Toggle among screen formats SLEEP Toggle to select the preset time to switch the TV to standby mode automatically C PICTURE Toggle to select the Smart Picture setting OK Confirm an entry or selection and display the channel grid when watching T V A V 4 b Navigation buttons Navigate through the menus INFO Display or hide the information screen about the selected channel Colour buttons Select tasks or options SIZE Toggle to change the font size in Teletext mode Full screen Top half Bottom half EN GG amp oo GG G SUBPAGE Display the sub page when the Teletext information has more than one page REVEAL Reveal hidden information of Teletext HOLD Toggle to stop the scrolling of pages to stop the text decoder receiving data FREEZE Press to freeze the TV picture AD Audio Description For RF Digital TV only UK only Enables audio commentary for
14. esults in accident injury or damage TV screen Required size inches pitch mm Required mounting bolts 23 100 x 100 4 x M4 7 TV Channel settings This chapter provides adjust the program related settings and the audio language related settings Using TV signal as the input source Country UK Audio Carrier Stereo ety Channis ib OK J Enter 4 Select Exi Exi Pm Press MENU button to display the menu P Press A V button to select the TV Item P Press OK button enter the TV sub item gt Press MENU button to exit the sub item To adjust the country for auto tuning Audio Carrier Stereo TTT Channels E 4 Select Exit Back P Press MENU A V button to select TV gt Press OK A V button to select Country P Press 4 gt button to select the item Audio Carrier Analog TV only 0 EL d Select Exit Back P Select Mono Stereo Dual Dual Il for preference Note if your preference is not the workable carrier the default priority will be Dual gt Dual Il Stereo gt Mono EN 15 English 1st Audio and 2nd Audio Digital TV only The Audio function allows selection of a preferred language e If audio data in a selected language is not broadcast the default language audio will be played When the languages you selected as the primary for Audio Language are not s
15. gs from the HDMI device are correct e Ifa HDMI to DVI adaptor or HDMI to DVI cable is used check that an additional audio cable is connected to AUDIO IN mini jack only 28 EN Computer connection issues The computer display on the TV is not stable e Check that a supported resolution and refresh rate is selected on the computer e Set the TV picture format to unscaled Others When should use SmartContrast feature e SmartContrast feature is designed for enhancing movies as well as playing some games as it enhances contrast ratio in dark moving scenes e Factory default is Off e For office usage or internet applications it is recommended to turn SmartContrast OTK Power LED turn on for Auto program update e n a case of auto s w update the unit will be turned on automatically for software updates There will be no video or audio when doing the updates The unit will also be returned to normal when software updates are completed Timing setting e Suggest do the time setting after scan TV channels to synchronize the time zone This will facilitate any auto software updates being active in the right and designated time period provided by the TV broadcasting system makers Contact us If you cannot resolve your problem refer to the FAQs for this T V at www philips com support If the problem remains unresolved contact Philips Consumer Care in your country as listed in this User Manual
16. key in the program number or select by list No signal analog channel is a default skip program 18 EN Channel Sort Swap Set Back d Select f 7 rk tal 1 ev ir 7 Digital Monoscope Digital Moving Pictu Digital H264 12 Digital H264 2 Digital H264 4 Digital H264 8 Digital MPEG2 Analog ARD Set d Select Back e To sort swap two channels P Press MENU A V button to select TV gt Pres OK A V button to select Channels gt Press OK A V button to select Channel Sort P Pres OK A V button to select the channel P Press OK button to set A checked icon displays P Press A V button to select another channel P Press OK button to swap these two channels Channel Edit Set dj Select Back Digital Monoscope Digital Moving Pictu Digital H264 12 Digital H264 2 Digital H264 4 Digital H264 8 Digital MPEG2 Analog ARD Set lt gt Select Back o edit a channel number and name of a channel P Press MENU A V button to select TV gt Press OK A V button to select Channels gt Press OK A V button to select Channel Edit gt Press OK A V button to select the channel P Press OK button to display the change dialog EN 19 English Decoder Analog TV only o edit a channel decode P Press MENU A V button to select TV gt Pres OK A V button to select Channels g
17. lect Channels gt Press OK A V button to select Update Scan WM Press OK button to execute the Update Scan Single RF Scan Digital TV only e Single RF Scan lets you manually add a digital channel to your channel list Press MENU A V button to select TV Press OK A V button to select Channels Press OK A V button to select Single RF Scan Press OK button to display the DTV or TV channel info Press lt 4 gt button to change RF Channel Press OK button to scan EN 17 English Analog Manual Scan Analog Channel Skip TV only Analog Manual Scan lets you manually add an analog channel to your channel list P Press MENU A V button to select TV gt Press OK A V button to select Channels gt Press OK A V button to select Analog Manual Scan P Press OK button to display the ATV or This function enables you to skip the stored TV channel info channels P Press A V button to select an item P Press MENU A V button to select P Press OK f button to Scan Up or Iv Down gt PressOK A V button to select Channels gt Press OK A V button to select Channel Skip M Press OK A V button to select the channel you want to skip Press OK button to set A checked icon AX is a skip one A skip channel is skipped when using CH and CHv button to browse the channels e A skip channel can be watch by
18. lity products We use some of the industry s most advanced manufacturing processes and practice stringent quality control However pixel or sub pixel defects on the TFT LCD panels used in flat panel monitors are sometimes unavoidable No manufacturer can guarantee that all panels will be free from pixel defects but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty This notice explains the different types of pixel defects and defines acceptable defect levels for each type In order to qualify for repair or replacement under warranty the number of pixel defects on a TFI LCD panel must exceed these acceptable levels For example no more than 0 000476 of the sub pixels on a monitor may be defective Furthermore Philips sets even higher quality standards for certain types or combinations of pixel defects that are more noticeable than others This policy is valid worldwide subpixel subpixel subpixel Y y y iuum Pixels and Sub pixels A pixel or picture element is composed of three sub pixels in the primary colors of red green and blue Many pixels together form an image When all sub pixels of a pixel are lit the three colored sub pixels together appear as a single white pixel When all are dark the three colored sub pixels together appear as a single black pixel Other combinations of Iit and dark sub pixels appear as single pixels of other colors Type
19. onnected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small e ry using a different picture format The picture position is incorrect EN 27 English e Picture signals from some devices may not fit the screen correctly Check the signal output of the device Sound issues There is a picture but no sound from the TV Note f no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to O e Check that the sound is not muted There is a picture but the sound quality is poor e Check that the sound settings are correctly set There is a picture but sound comes from one speaker only e Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices e Note that HDCP support can delay the time taken for a T V to display content from a HDMI device e Ifthe TV does not recognise the HDMI device and no picture is displayed try switching the source from one device to another and back again e If there are intermittent sound disruptions check that output settin
20. ow 5 C unpack the TV and wait until the T V temperature matches room temperature before connecting the TV to the power outlet Screen care e Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the I V e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e To avoid deformations and colour fading wipe off water drops as soon as possible Recycling ae Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you see the crossed out wheeled bin symbol attached to a product it means the product is covered by the European Directive 2002196 EC Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be
21. rial in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself e Use the TV and accessories only as intended by the manufacturer e he caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Support for service or repairs CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO e Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Mains fuse UK only This TV is fitted wi
22. s Watch connected devices Adjust TV volume Product information Supported display resolutions Tuner Reception Iransmission Remote control Power Supported TV mounts TV Channel settings Using TV signal as the input source To adjust the country for auto tuning Audio Carrier Analog TV only 6 8 O 12 UP 12 13 13 15 15 15 15 1st Audio and 2nd Audio Digital TV only 16 Channel Scan Update Scan Single RF Scan Digital TV only Analog Manual Scan Analog TV only Channel Skip Channel Sort Swap Channel Edit Decoder Analog TV only Analog Ch Fine Tune Analog TV only Appendix 16 17 17 18 18 17 19 20 20 20 8 Feature setting highlights Using the Teletext Using the EPG Parental Menu setting Channel Block Parental Guidance Input Block Set Password Clean All OAD update 9 Pixel policy 10 Troubleshooting General TV issues TV channel issues Picture issues Sound issues HDMI connection issues Computer connection issues Others Contact us 21 21 22 27 27 23 25 24 24 24 24 27 27 77 2 28 28 28 28 28 1 Notice 2011 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The mate
23. s of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways There are two categories of pixel defects and several types of sub pixel defects within each category Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or on That is a bright dot is a sub pixel that stands out on the screen when the monitor displays a dark pattern There are the types of bright dot defects One lit red green or blue sub pixel Two adjacent lit sub pixels Red Blue Purple Red Green Yellow Green Blue Cyan Light Blue Three adjacent lit sub pixels one white pixel Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or off That is a dark dot is a sub pixel that stands out on the screen when the monitor displays a light pattern These are the types of black dot defects a H N ES zi Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable Philips also specifies tolerances for the proximity of pixel defects Pixel Defect Tolerances In order to qualify for repair or replacement du
24. t Pres OK A V button to select Decoder gt Pres OK A V button to select the channel P Press OK button to set A checked icon displays Analog Ch Fine Tune Analog TV only Normally fine tuning is only necessary if reception is poor P Press MENU A V button to select TV gt Pres OK A V button to select Channels 20 EN gt Pres OK A V button to select Analog Ch Fine Tune P Press OK A V button to select the channel you want to fine tune P Press OK button to the Fine Tune dialogue P Press 4 gt to fine tune the frequency P Press OK button to save Appendix Alphabet and numeric numbers mapping table on the Remote control o edit a channel number and name of a channel via the Remote control 0 O Toad 2 ABCabc 3 DEFdef3 4 GHlghi4 5 JKLjkl5 6 MNOmno6 7 PQRSpars 8 T UVtuv8 9 WXY Zwxyz9 8 Feature setting behuiceituli ct on No Teint wh highlights country is U K TENT cha Menu Features page provides Menu Language Picture format Time Subtitle Teletext Language Common Interface and Reset Default Menu Language English Picture Format Wide 2 1 Ch INTROGUCT E OPi OF du d ELA 1 T I zm TM Ln AN m io Solon LI i ERAGE race 2 Dio oreo To display Teletext Press the TELETEXT COK Enlar lt gt Select 5st exit To change the Teletext Press the A W button l page P Press MENU button to display the menu
25. th an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 10A Remove fuse cover and fuse The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type Refit the fuse cover In order to maintain conformity to the EMC directive the mains plug on this product must not be detached from the mains cord cable Copyright VESA FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world I DOLBY DIGITAL PLUS Manufactured under license from Dolby Laboratories Dolby and double D symbol are trademarks of Dolby Laboratories EN English 2 Important Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Safety e Risk of electric shock or fire e Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before
26. the visually handicapped SOURCE Select connected devices EPG Switch the Electronic Programme Guide On or Off VIDEO Press to switch to VIDEO YPbPr Composite SCART mode HDMI Press to switch to HDMI mode VOL Increase or decrease the volume DUAL I II Toggle to select mono stereo dual dual Il from TV RF input SOUND Toggle to select the Smartsound Mode MENU EXIT Press to open or close the on screen menu MIX Press to overlay the Teletext page on the TV picture TELETEXT Press to open or close the Teletext G1 INDEX Press to display the index page of Teletext 32 SUBTITLE e In TV mode Press to turn the subtitle on or off e In Text mode Press to open the subtitle page 83 FAV Press to display the Favourite List CH LIST Press to display the Channel List EN 11 English 5 Start to use This section helps you perform basic TV operations Switch your TV on off or to standby SOURCE SOURCE M i LI n LI L POWER wun C9 ec ses ec To switch on e If the standby indicator is off press POWER at the side of the TV e If the standby indicator is red press Standby On on the remote control To switch to standby e Press Standby On on the remote control L gt The standby indicator switches to red To switch off e Press POWER at the side of the TV L gt The standby in
27. upplies information such as program listings start and end times for all available services In addition detailed information about the program is often available in the EPG the availability and amount of these program details will vary depending on the particular broadcaster This function can be used only when the EPG information is broadcasted by broadcasting companies Filter All types o Pmwpxe Nextpage P Press the EPG button to display the EPG The functions of color keys are optional e Can t display EPG when TV channel is Analog channel Parental Menu setting Menu Parental page provides Channel Block Parental Guidance Set Password and Key Lock settings mu EI pa m Pm Press MENU button to display the menu P Press A V button to select the Parental item P Press OK button enter the Parental sub Item WM Press number 0 9 button to key in the correct password to select the sub item The default password is 0000 P Press MENU button to exit the sub item Channel Block Blocks any channels that you do not want to watch or that you do not want your children to watch Default value is non block Channel with a lock icon Is a blocked channel A blocked channel can be un locked temporarily after key in the correct password P Press the OK button to display the password dialog Press the 0 9 buttons to key in the correct password All lo
28. upported you can select language in secondary category P Press MENU A V button to select TV gt Pres OK A V button to select 1st Audio and 2nd Audio P Press 4 gt button to select the item 16 EN Channel Scan IPS 1 arem T AT PHI Use this function to find and store all available channels automatically in both digital and analog mode P Press MENU A V button to select TV gt Pres OK A V button to select Channels gt Press OK A V button to select Channel Scan P Press OK button to execute the Channel Scan PHILIPS e PHI urs i L gt Channel Scan scan both the digital and analog channels first scan digital channels and analog channels last L Channel Scan will erase all old stored channels scanned by previous execution L gt Digital channel number will assign by LCN Logical Channel Number if LCN is exist Digital channel which no LCN or LCN conflict will assign from 800 to 899 Analog channels will assign from 901 to 999 if have channel name will assign from 901 others will assign by frequency L gt f can t scan any digital channels only analog channels will assign analog channel from 1 Update Scan o check if any new channel is available Only new channels found will be stored and original channels won t be overwritten P Press MENU A V button to select TM gt Press OK A V button to se
29. use e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing e Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire e Risk of injury or damage to the TV e Two people are required to lift and carry a TV that weights more than 25 kg 4 EN e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the T V and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never
Download Pdf Manuals
Related Search