Home

Samsung XL2270HD

1. 3 5 Using the Product MENU DESCRIPTION Picture Options e Digital NR gt Digital Noise Reduction If the broadcast signal received by your TV is weak you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen e lt Off gt lt Low gt lt Medium gt lt High gt lt Auto gt e lt HDMI Black Level When a DVD or Set top box is connected to your TV via lt HDMI gt it may cause a degradation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your TV by configuring the lt HDMI Black Level gt This function is active only when the external device is connected via lt HDMI gt e lt Normal gt lt Low gt e lt Film Mode The lt Film Mode feature offers you a theatre quality viewing experience e lt Off gt lt Auto gt E9 lt Film Mode gt is supported in lt TV gt lt EXT gt lt Component gt 480i 1080i and lt HDMI gt 480i 10801 Picture Reset Picture parameters are replaced with the factory default values e Reset Picture Mode lt Cancel gt Sound Mode Equalizer SRS TruSurrdund HO Standard Using the Product 3 5 MENU DESCRIPTION Mode e lt Standard gt Choose Standard for the standard factory settings e lt
2. HDMI Cable Installing the Product 2 1 2 2 Installing the Stand Before assembling the product place the product down on a flat and stable surface so that the screen is facing downwards Insert the Stand Connector into the Stand Base in the direction shown by the figure Check if the Stand Connector is firmly connected Turn the connecting screw at the bottom of the stand fully so that it is completely fixed Place a soft cloth over the table to protect the product and place the product onto the cloth face down 2 2 Installing the Product Hold the main body of the product with your hand as shown by the figure Push the assembled stand into the main body in the direction of the arrow as shown in the figure Caution Do not lift the product holding only the stand Installing the Product 2 2 2 3 Removing the Stand Before removing the stand place the product down on a flat and stable surface so that the screen faces downwards Place a soft cloth over the table to protect the product and place the product face down Hold the main body of the product with your hand as shown by the figure Pull the stand in the direction of the arrow as shown in the figure to separate it Turn the connecting screw at the bottom of the stand to separate it Take the Stand Connector out of the Stand by pulling it in the direction of the arrow as shown in the figure 2 3 Insta
3. MENU DESCRIPTION Game Mode When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting game menu e lt Off gt lt On gt e Restrictions on game mode Caution e To disconnect the game console and connect another external device set Game Mode to lt Off gt in the setup menu If you display the TV menu in lt Game mode gt the screen shakes slightly e If lt Game Mode is sOn e Picture mode is automatically changed to lt Standard gt and cannot be changed e lt Sound gt mode is automatically changed to lt Custom gt and cannot be changed Adjust the sound using the equalizer e Game Mode is not available in regular lt TV gt and lt PC gt mode e If the picture is poor when external device is connected to TV check if lt Game Mode gt is lt On gt Set Game Mode to lt Off gt and connect external devices Child Lock This feature allows you to prevent unauthorized users such as children from watching unsuitable programme by muting out video and audio e lt Off gt lt On gt e Before the setup screen appears the PIN number input screen appears Enter your 4 digit PIN number e The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting lt Change PIN gt from the menu e You can lock some channels in lt Channel List gt e Child Lock is available only in TV mode Change PIN You can change your personal I
4. Ifthe programme you are watching does not support the lt Hard of hearing function Normal automatically activates even though lt Hard of hearing mode is selected e English is the default in cases where the selected language is unavailable in the broadcast e You can select these options simply by pressing the SUBT button on the remote control Teletext Language You can set the lt Teletext language by selecting the language type English is the default in cases where the selected language is unavailable in the broadcast Preference lt Primary Audio Language Secondary Audio Language lt Primary Subtitle Language lt Sec ondary Subtitle Language Primary Teletext Language lt Secondary Teletext Language Using this feature users can select one of the languages The language selected here is the default when the user selects a channel If you change the language setting the Subtitle Language Audio Language and the Teletext Lan guage of the Language menu are automatically changed to the selected language The Subtitle Language Audio Language and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted If you change this language setting the new selection is only valid for the current channel The changed setting does not change the setting of the Primary Subtitle Language Primary Audio Lan guage or the Primar
5. SyncMaster XL2270HD XL2370HD LCD TV Monitor User Manual The colour and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance snus ungd Table Of Contents MAJOR SAFETY PRECAUTIONS Before YOU Start 24cccicecsiddieccedwii sd eet AG oes ALON Care and Maintenance ccc eee es Safety Precautions 1 060 0se eevee dee es EK we eee ee ee ee INSTALLING THE PRODUCT Package Contents 0c es Installing the Stand 2a scsietewes cece inten ceed eee eee ee es Removing the Stand 22 paa KAG NAG ba KM coves hk eden ems Attaching a Wall Mount Desktop Stand 00050 Connecting toa Computer 0 cc es USING LASA IN vey eee KAPE ee Cee oe Eee ee tee ee eee es Connecting an HDMI cable 0 e ee es Connecting Using a DVI to HDMI Cable Connecting a Component cable cee ees Connecting a Scart cable ee Connecting COMMON INTERFACE 20220 anna aan Connecting to an Amplifier cee ee Connecting Headphones 00 cee eee ee Kensington LOCK cap soa et oe cee eee eee ee ee ee h ae ee OS USING THE PRODUCT Plug amp Play Feature aa mka KA de de eweenn ds ieee saws Viewing the Control panel 0 000 e eee es Remote CONGO a cassia een ceded teow eeu KWAN ede teense ena Teletext Feature 1 0 0 00 cc es Using the Screen
6. please separate batteries from other types of waste and recycle them through your local free battery return system The rechargeable battery incorporated in this product is not user replaceable For information on its replacement please contact your service provider 6 4 More Information
7. selected channels e lt TOOLS gt Tools Displays the lt Delete gt or lt Add gt lt Add to Favourite gt or lt Delete from Favourite gt lt Lock gt or lt Unlock gt lt Select All gt or lt Deselect All gt lt Auto Store gt The Options menus may differ depending on the situation e Channel Status Display Icons Tl An analogue channel 9 A channel set as a Favourite e w A channel selected by pressing the yellow button O A programme currently being broadcast fm A locked channel A reserved programme Channel Mode Fine Tune When press the P button channels will be switched within the selected channel list e lt Added Ch 5 Channels will be switched within the memorised channel list e lt Favourite Ch 5 Channels will be switched within the favourite channel list Use fine tuning to manually adjust a particular channel for optimal reception e If you do not store the fine tuned channel in memory adjustments are not saved e Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner e To reset the fine tuning setting press the V button to select Reset then press the l4 button e Only Analogue TV channels can be fine tuned Using the Product 3 5 Setup Plug 4 Play Language English Time Child Lock Change PIN Parental Lock MENU DESCRIPT
8. Adjustment Menu OSD On Screen Display Installing the Device Driver 0 00 cece eee eee Standard Signal Mode Table 0 0 cee INSTALLING THE SOFTWARE Natural CON 66 666 phan at wa BAWAT deed dated edhe wk eee eA MUIKOCCEN oc cafe etree ee AA Ma ee oe ee ae eee ee a TROUBLESHOOTING Monitor Self Diagnosis 000 cee ee Before Requesting Service 00 cece ee PAG pitas eae owed et Sted AA NG nk AG AG AN MORE INFORMATION DOCCIICAUONS a AA a oe oe ee ees Power Saving Function 0 00 cece eee Contact SAMSUNG WORLDWIDE 000 c eee ees Correct DISPOSaL 6 6016 AA KG ee EOE ET SO See RENEE RES EES 1 Major Safety Precautions 1 1 Before You Start Icons used in this manual ICON NAME MEANING r Caution Indicates cases where the function may not work or the setting may be canceled Note Indicates a hint or tip to operate a function Using this Manual e Make yourself fully aware of the safety precautions before using this product e Ifa problem occurs refer to the Troubleshooting section Copyright Notice The contents of this manual are subject to change without prior notice for performance improvement Copyright 2010 Samsung Electronics Co Ltd All Rights Reserved The copyright of this manual is reserved by Samsung Electronics Co Ltd The contents of this manual may not be partially or in whole reproduced distributed or
9. Anynet gt Function lt Anynet HDMI CEC gt must be set to On When the lt Anynet HDMI CEC gt function is disabled all the lt Anynet gt related operations are deactivated e lt Auto Turn Off gt Setting an lt Anynet gt Device to turn Off automatically when the TV is turned off The active source on the TV remote must be set to TV to use the lt Anynet gt function If you set Auto Turn Off to Yes connected external devices are also turned off when the TV is turned off If an external device is still recording it may or may not turn off 3 5 Using the Product Device List Device List Refresh Enter 9 Return 1 Press the TOOLS button Press the L7 button to select lt Anynet HDMI CEC gt 2 Press the a4 or button to select Device List gt then press the button lt Anynet gt devices connected to the TV are listed If you cannot find a device you want press the red button to scan for devices 3 Press the a or button to select a particular device and press the L button It is switched to the selected device lt Anynet HDMI CEC gt must be set to On in the lt Application gt menu for the lt Device List gt menu to appear Switching to the selected devices may take up to 2 minutes You cannot cancel the operation during the switching operation The time required to scan for devices is determined by the number of connected devices When the device scan is complete t
10. Itis activated when the signal is NTSC Samsung s new TVs allow you to make even more precise picture settings than previous models See below to adjust detailed picture settings lt Advanced Settings gt is available in lt Standard gt or lt Movie gt mode e lt Black Tone You can select the level on the screen to adjust the screen depth e lt Off gt lt Dark gt lt Darker gt lt Darkest gt e lt Dynamic Contrast gt You can adjust the screen contrast so that the optimal contrast is provided e lt Off gt lt Low gt lt Medium gt lt High gt e lt Gamma gt You can adjust the Primary colour Red Green Blue Intensity e lt Colour Space lt Colour Space is a colour matrix composed of red green and blue colours Select your favourite lt Colour Space gt to experience the most natural colour e lt Auto gt lt Native gt e lt White Balance You can adjust the colour temperature for more natural picture colours e lt R Offset gt lt G Offset gt lt B Offset gt lt R Gain gt lt G Gain gt lt B Gain gt lt Reset gt e Flesh Tone You can emphasize the pink lt Flesh Tone in the picture Changing the adjustment value will refresh the adjusted screen e lt Edge Enhancement gt You can emphasize object boundaries in the picture e lt Off gt lt On gt Using the Product 3 5 MENU DESCRIPTION Picture Options lt Colour Tone gt T
11. MENU FAV CH Opens the on screen menu and Press to switch to your favourites exits from the menu or closes the channels adjustment menu O FITOOLS 2 RETURN Use to quickly select frequently Returns to the previous menu used functions 5 WAGE Up Down Left Right but f EXIT tons L5 ENTER Exits from the menu screen Moves from one menu item to another horizontally vertically or adjusts selected menu values 9 i INFO SUBT Current picture information is dis Digital subtitle display played on the upper left corner of the screen 10 Colour BUTTONS GUIDE Press to add or delete channels and Electronic programme Guide to store channels to the Favourite EPG display channel list in the Channel List menu 11 TTX MIX TV channels provide written infor mation services via teletext Ei EJ EN a a Go Ea c sa Teletext Feature 3 3 Using the Product Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure 2 Install two AAA size batteries Make sure to match the and ends of the batteries with the diagram inside the compartment 3 Close the cover Remove the batteries and store them in a cool dry place if you won t be using the remote control for a long time If the remote control doesn t work check the following e Is the TV power on e Are the plus and minus ends of the batteries reversed e Are the batteries drained e Is there a power o
12. in fire or electric shock When thunder or lighting occurs unplug the power cord and under no circumstance touch the antenna cable as this is danger ous e Otherwise it may result in electric shock or fire When cleaning the product disconnect the power cord and clean the product with the supplied cleaning cloth e Avoid using chemicals such as wax benzene alcohol thinner mosquito repellent fragrance lubrication or cleansing agent when cleaning the product This may result in the exterior being deformed or the print being removed Since the exterior of the product is easily scratched be sure to use the supplied cleansing cloth To move the product turn the power off and unplug the power cord the antenna cable and any other wires connected to the prod uct e Otherwise it may result in electric shock or fire due to the damaged power cord Avoid letting children hang or climb onto the product e Otherwise it may result in the product falling and this may result in injury or death Avoid placing objects such as toys and cookies on top of the product e Ifa child hangs over the product to grab an object the object or the product may fall and this may result in injury or even death Avoid dropping an object over the product or cause impact to the product e Otherwise it may result in electric shock or fire 1 3 Major Safety Precautions Avoid moving the p
13. press the LF button e lt Air gt lt Air gt antenna signal lt Cable gt lt Cable gt antenna signal e In Cable mode you can select the correct signal source among lt Digital amp Analogue gt lt Digital gt and lt Analogue gt by pressing the A V lt or gt button then press the L button If you have Digital cable select the cable system signal source for both Analogue and Digital Contact your local cable company to identify the type of cable system that exists in your particular area 6 Press the A or V button to select the channel source to memorise Press the L7 button to select lt Start gt e When setting the antenna source to lt Cable gt a step appears allowing you to set a value for the digital channel search For more information refer to lt Channel gt lt Auto Store gt e Digital amp Analogue gt Digital and Analogue channels e lt Digital gt Digital channels e lt Analogue gt Analogue channels e The channel search will start and end automatically Press the button at any time to interrupt the memorisation process e After all the available channels are stored the message Set the lt Clock Mode is displayed 7 Press the button Press the A or V button to select lt Auto gt then Press the L button e If you select lt Manual gt lt Set current date and time is displayed e If you have received a digital signal the time will be set automatically
14. up Used to display the next teletext page o page down Used to display the previous tele text page mode Press to select the teletext mode LIST FLOF If you press it in the LIST mode it switches into the List save mode In the List save mode you can save teletext page into list using the 3 store button hold Used to hold the display on a given page if the selected page is linked with several secondary pages which follow on automati cally To resume press it again E cancel Used to display the broadcast when searching for a page Colour buttons red green yel low blue If the FASTEXT system is used by a broadcasting company the different topics covered on a tele text page are colour coded and can be selected by pressing the coloured buttons Press one of them corresponding to the required The page is dis played with other coloured infor mation that can be selected in the same way To display the previ ous or next page press the cor responding coloured button 3 4 Using the Product 3 5 Using the Screen Adjustment Menu OSD On Screen Display The Screen Adjustment Menu OSD On Screen Display Structure TOP MENUS SUB MENUS Picture MagicBright MagicAngle Contrast Brightness Sharpness Auto Adjust PC DVI ment Screen Picture Picture Reset Options Picture Mode MagicAngle Backlight Contrast Brightness Sharpness
15. used in any form without the written permission of Samsung Electronics Co Ltd The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are the registered trademarks of Microsoft Corporation VESA DPM and DDC are the registered trademarks of the Video Electronics Standard Association The ENERGY STAR logo is the registered trademark of the U S Environmental Protection Agency All other trademarks mentioned herein belong to their respective companies SIS TruSurround HD SRS and symbol are trademarks of SRS Labs Inc TruSurroend HO TruSurround HD technology is incorporated under licence from SRS Labs Inc C DOLBY Manufactured under licence from Dolby Laboratories Dolby and the double D sym DIGITAL bol are trademarks of Dolby Laboratories Major Safety Precautions 1 1 1 2 Care and Maintenance External Surface and Screen Maintenance Clean the product with a soft dry cloth e Avoid cleaning the product with an inflammable substance such as benzene or thinner or with a wet cloth This may result in a problem with the product e Avoid scratching the screen with your fingernails or a sharp object e Avoid cleaning the product by spraying water onto it If water enters the product it may result in fire electric shock or a problem with the product A white stain may be generated on the surface of the model if a supersonic humidifier i
16. you can Add Delete or set Favourite channels and use the programme guide for digital broadcasts You can select these options by simply pressing the CH LIST button on the remote control e lt All Channels Shows all currently available channels e lt Added Channels Shows all added channels e lt Favourites gt Shows all favourite channels A Press the TOOLS button to display the lt Tools gt menu You can also set the add to or delete from lt Favourite gt by selecting Tools lt Add to Favourite gt or lt Delete from Favourite gt To select the Favourites channels you have set up press the FAV CH button on the remote control e Programmed Shows all current reserved programmes e Select a channel in the lt All Channels gt sAdded Channels gt or lt Favourites gt screen by pressing the A V buttons and pressing the L button Then you can watch the selected channel e Using the Colour buttons with the lt Channel List e lt Red gt Channel Type Toggle between your TV Radio Data Other and All e lt Green gt Zoom Enlarges or shrinks a channel number e lt Yellow gt Select Selects multiple channel lists You can perform the Add Delete or Add to Favourite Delete from Favourite function for multiple channels at the same time Select the required channels and press the yellow button to set all the selected channels at the same time The check mark appears to the left of the
17. 00 VESA 1280 X 1024 79 976 75 025 135 000 VESA 1440 x 900 55 935 59 887 106 500 VESA 1600 x 1200 75 000 60 000 162 000 VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1080 67 500 60 000 148 500 Horizontal Frequency The time taken to scan one line from the left most position to the right most position on the screen is called the horizontal cycle and the reciprocal of the horizontal cycle is called the horizontal frequency The horizontal frequency is represented in kHz Vertical Frequency A panel must display the same picture on the screen tens of times every second so that humans can see the picture This frequency is called the vertical frequency The vertical frequency is represented in Hz Using the Product 3 7 4 Installing the Software 4 1 Natural Color What is Natural Color This software is for Samsung products only and enables you to adjust the displayed colors on the product so they more closely match the colors of printed pictures For more information refer to the online help of the software F 1 Natural Color is provided online You can download it from the website below and install http www samsung com us consumer learningresources monitor naturalcolorexpert pop_download html 4 1 Installing the Software 4 2 MultiScreen What is MultiScreen im MultiScreen MultiScreen enables you to partition multiple sections on the Monitor Insta
18. D number that is required to set up the TV e Before the setup screen appears the PIN number input screen appears Enter your 4digit PIN number e The default PIN number of a new TV set is 0 0 0 0 e If you forget the PIN code press the remote control buttons in the following sequence which resets the PIN to 0 0 0 0 POWER Off MUTE 8 52 54 POWER On Parental Lock This feature allows you to prevent unauthorized users such as children from watching unsuitable programme by a 4 digit PIN Personal Identification Number code that is defined by the user e lt Allow All gt Press to unlock all TV ratings e lt Block All gt Press to lock all TV ratings e Before the setup screen appears the PIN number input screen appears Enter your 4 digit PIN number e The default PIN number of a new TV set is 0 0 0 0 You can change the PIN by selecting Change PIN from the menu e When the parental ratings are set the o symbol is displayed 3 5 Using the Product MENU DESCRIPTION Subtitle You can activate and deactivate the subtitles Use this menu to set the lt Mode gt lt Normal gt under the menu is the basic subtitle and lt Hard of hearing gt is the subtitle for a hearing impaired person e lt Subtitle gt Switches subtitles on or off e lt Mode gt Sets the subtitle mode e lt Normal gt lt Hard of hearing gt e Subtitle Language Set the subtitle language
19. ENU DESCRIPTION Source List Use to select lt PC gt lt TV gt or an external input source connected to the Monitor Use to select the screen of your choice You can use the SOURCE button on the remote control e lt PC gt lt TV gt lt Ext gt lt DVI gt lt Component gt lt HDMI gt Edit Name Name the input device connected to the input jacks to make your input source selection easier e lt VCR gt lt DVD gt lt Cable STB gt lt Satellite STB gt lt PVR STB gt lt AV Receiver gt Game lt Camcorder gt lt PC gt sDVI PC gt lt DVI gt lt TV gt lt IPTV gt lt Blu ray gt lt HD DVD gt lt DMA gt Q When a PC with a resolution of 1920 x 1080 60Hz is connected to the HDMI IN port you should set the lt HDMI gt mode to lt DVI PC gt in the lt Edit Name gt of the lt Input gt mode In this case a separate sound connection is required Application Anynet HDMI CEC What is lt Anynet gt lt Anynet gt is a function that enables you to control all connected Samsung devices that support lt Anynet gt with your Samsung TV s remote The lt Anynet gt system can be used only with Samsung devices that have the lt Anynet gt feature To be sure your Samsung device has this feature check if there is an lt Anynet gt logo on it Connecting Anynet Devices Anynet 1 o _ a HDMI Cable sae ee I I I I I HDMI Cable 1 Connect the
20. HDMI IN jack on the TV and the HDMI OUT jack of the corresponding lt Anynet gt device using an HDMI cable 2 Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding lt Anynet gt device using an HDMI cable eg Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theatre When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Using the Product 3 5 Home Theatre s Front Left and Right speakers and the subwoofer If you want to hear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD Satellite Box ie Anynet Device 1 directly to the Amplifier or Home Theatre not the TV Connect only one Home Theatre Some HDMI cables may not support lt Anynet gt functions lt Anynet gt works when the AV device supporting lt Anynet gt is in the Standby or On status lt Anynet gt supports up to 10 AV devices in total Note that you can connect up to 3 devices of the same type Setting Up Anynet Anynet HDMI CEC Device List Setup nter 89 Return x Press the TOOLS button to display the lt Tools gt menu You can also display the lt Anynet gt menu by selecting lt Tools gt lt Anynet HDMI CEC gt Setup Anynet HDMI CEC Auta Tum rf 4 Move S Enter 9 Retum e lt Anynet HDMI CEC gt To use the lt
21. ION Plug amp Play This brings up the menu items that appeared when you first plugged in the TV The default PIN number of a new TV set is 0 0 0 0 Language The language chosen affects only the language of the OSD 3 5 Using the Product MENU DESCRIPTION Time Using the Product lt Clock gt Setting the clock is necessary in order to use the various timer features of the TV e Clock Mode You can set up the current time manually or automatically e lt Auto gt lt Manual gt ew Depending on the broadcast station and signal the auto time may not be set correctly If this occurs set the time manually e The Antenna or cable must be connected in order to set the time automatically e Clock Seb You can set the current time manually This function is only available when lt Clock Mode is set to Manual e You can set the day month year hour and minute directly by pressing the number buttons on the remote control e The current time will appear every time you press the INFO button e If you disconnect the power cord you have to set the clock again lt Sleep Timer The sleep timer automatically shuts off the TV after a preset time e lt Off gt s30 min lt 60 min s90 min 2120 min 2150 min s180 min A Press the TOOLS button to display the lt Tools gt menu You can also set the sleep timer by selecting lt Tools gt lt Sleep Ti
22. If not select Manual to set the clock Using the Product 3 1 8 The description for the connection method providing the best HD screen quality is displayed Check the description and press the L button 9 The message lt Enjoy your TV is displayed When you have finished press the button If you want to reset this feature 1 Press the MENU button to display the menu Press the A or V button to select lt Setup gt then press the button 2 Press the button again to select lt Plug amp Play ex The sPlug 8 Play feature is only available in the TV mode e The default PIN number of a new TV set is 0 0 0 0 3 1 Using the Product 3 2 Viewing the Control panel oe MENU Touch one of the operating buttons lightly The LED buttons appear ICON DESCRIPTION Q BG Use this button to select a function Signals other than the TV signal can only be selected if the corresponding device is connected The order in which the TV external input signal changes lt PC gt lt TV gt lt EXT gt lt DVI gt lt Component gt lt HDMI gt MENU Press this button to view the On Screen Display OSD This button is also used to exit the OSD or to return to a higher level OSD menu O Moves from one menu item to another horizontally or adjusts selected menu values Adjusts the audio volume O V A Use these buttons to navigate the menu or to a
23. Language You can change the default value for audio languages Displays the language information for the incoming stream While viewing a digital channel this function can be selected e You can only select the language among the actual languages being broadcast Audio Format When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function e lt MPEG gt lt Dolby Digital gt While viewing a digital channel this function can be selected e The lt Audio Format appears according to the broadcasting signal 3 5 Using the Product MENU DESCRIPTION Audio Description This is an auxiliary audio function that provides an additional audio track for visually challenged per sons This function handles the Audio Stream for the AD Audio Description when it is sent along with the Main audio from the broadcaster Users can turn the lt Audio Description gt On or Off and con trol the volume e lt Audio Description gt Turn the audio description function on or off e lt Volume gt You can adjust the audio description volume e Volume is active when lt Audio Description is set to On While viewing a Digital channel this function can be selected Auto Volume Reduces the differences in volume level among channels e l
24. MI IN terminal of the monitor using the HDMI cable Press the SOURCE button at the front of the monitor or on the remote control to select lt HDMI gt mode You do not need to make a separate audio connection when connecting via HDMI 2 7 Installing the Product 2 8 Connecting Using a DVI to HDMI Cable 1 Connect the DVI output terminal of an external device to the HDMI IN terminal of the monitor using a DVI to HDMI cable 2 Connect the red and white plugs of an RCA to stereo for PC cable to the same coloured audio output terminals of the digital output device and connect the opposite plug to the HDMI PC DVI D AUDIO IN terminal of the product Press the SOURCE button at the front of the monitor or on the remote control to select lt HDMI gt mode Installing the Product 2 8 2 9 Connecting a Component cable 1 Connect the VIDEO OUT port of the AV device DVD VCR Cable Satellite box to the COMPONENT IN Pp Pp Y input ports using a component video cable Pp Pp Y 2 Connect the audio port of the AV device DVD VCR Cable Satellite box to the COMPONENT IN R AUDIO L port of the monitor Press the SOURCE button at the front of the monitor or on the remote control to select the lt Component gt mode For an explanation of Component video consult your DVD VCR Cable Satellite box manual 2 9 Installing the Product 2 10 Connecting a Scart cable 1 Connect t
25. MSUNG 0900 7267864 E http www samsung com 0 10 Min NORWAY 815 56 480 http www samsung com POLAND 0 801 1SAMSUNG 172678 http www samsung com 022 607 93 33 PORTUGAL 80820 SAMSUNG 726 7864 http www samsung com SLOVAKIA 0800 SAMSUNG 726 7864 http www samsung com SPAIN 902 1 SAMSUNG 902 172 678 http www samsung com SWEDEN 0771 726 7864 SAMSUNG http www samsung com SWITZERLAND 0848 SAMSUNG 7267864 CHF 0 08 http www samsung com ch min http www samsung com ch fr French U K 0845 SAMSUNG 7267864 http www samsung com CIS ARMENIA 0 800 05 555 AZERBAIJAN 088 55 55 555 BELARUS 810 800 500 55 500 GEORGIA 8 800 555 555 6 3 More Information CIS KAZAKHSTAN 8 10 800 500 55 500 KYRGYZSTAN 00 800 500 55 500 http www samsung com MOLDOVA 00 800 500 55 500 RUSSIA 8 800 555 55 55 http www samsung com TADJIKISTAN 8 10 800 500 55 500 http www samsung com UKRAINE 0 800 502 000 http www samsung com ua http www samsung com ua ru UZBEKISTAN 8 10 800 500 55 500 http www samsung com More Information 6 3 6 4 Correct Disposal CORRECT DISPOSAL OF THIS PRODUCT WASTE ELECTRICAL amp ELECTRONIC EQUIPMENT EUROPE ONLY x Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessori
26. Music gt Choose Music when watching music videos or concerts e lt Movie gt Choose Movie when viewing movies e lt Clear Voice gt Emphasizes voice over other sounds e lt Custom gt Choose Custom if you want to adjust the settings according to personal preference x Press the TOOLS button to display the lt Tools gt menu You can also set the lt Sound Mode gt by selecting lt Tools gt lt Sound Mode gt Equalizer You can adjust the left and right sound balance and equalizer settings as required SRS TruSurround HD e lt Mode gt You can select a sound mode to suit your personal preferences e lt Balance gt You can adjust the left and right sound balance and equalizer settings as required e lt 100Hz gt lt 300HZ gt lt 1KHz gt lt 3KHz gt lt 10KHz gt To adjust the level of different bandwidth frequencies e Reset Resets the equalizer settings to the default values lt SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5 1 multi channel content over two speakers TruSurround delivers a compelling virtual surround sound experience through any two speaker play back system including internal television speakers It is fully compatible with all multichannel formats e lt Off gt lt On gt x Press the TOOLS button to display the lt Tools gt menu You can also set the lt Picture Mode gt by selecting lt Tools gt lt SRS TruSurround HD gt Audio
27. Personalization Display Adjust resolution For more information refer to the User Manual of the computer or the graphics card How can use the power saving function Windows XP Configure it by selecting Control Panel Appearance and Themes Display Screen Saver Settingor configure it in the BIOS SETUP of the computer Windows ME 2000 Configure it by selecting Control Panel Appearance and Themes Display Screen Saver Settingor configure it in the BIOS SETUP of the computer Windows 7 Change settings by selecting Control Panel Appearance and Personalization Personalization Screen Saver You can also use the BIOS SETUP menu on the PC For more information refer to the Windows user manual for the computer How can clean the outer case LCD Panel Disconnect the power cord and then clean the monitor with a soft cloth using either a plain water Do not leave any detergent or scratches on the case Do not let any water enter the monitor Can watch digital TV broadcasting with an ana logue TV No The analogue TV cannot interpret digital signals Therefore a digital TV is required to watch digital TV broadcasting Can use my present antenna to receive digital broadcasting As for existing analogue TV digital TV is designed so that digital broad casting signals are received via both indoor and outdoor antennas If signal reception is very good in your
28. Please be careful not to disconnect the power or remove the USB drive while upgrades are being applied The TV will turn off and turn on automatically after completing the firmware upgrade Please check the firmware version after the upgrades are complete the new version will have a higher number than the older version When software is upgraded video and audio settings you have made will return to their default factory settings We recommend you write down your settings so that you can easily reset them after the upgrade lt By Channel gt Upgrades the software using the broadcasting signal lt Standby Mode Upgrade gt To continue software upgrade with master power on select on by pressing the A or V button 45 minutes after entering standby mode a manual upgrade is automatically conducted Since the power of the unit is turned on internally the screen may be on slightly for the LED product This phenomenon may continue for more than 1 hour until the software upgrade is completed lt Alternative Software gt Backup If there is an issue with the new firmware and it is affecting operation you can change the software to the previous version If software was changed existing software is displayed e You can change current software to alternative software by SAlternative Software 3 5 Using the Product MENU DESCRIPTION HD Connection Guide This menu presents the connection method that provides the o
29. Stand 4 8 kg 10 6 lbs 571 0 x 432 5 x 189 5 mm 22 5 x 17 0 x LO inch With Stand 5 2 kg 11 5 Ibs VESA Mounting Interface 75 mm x 75 mm 2 95 x 2 95 inch Environmental Operating Temperature 50 F 104 F 10 C 40 C considerations Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 Yo 95 Yo non condensing Class B Information Communication Equipment for Home Use This device has been registered regarding EMI for home use Class B It may be used in all areas Class B equipment emits less electromagnetic waves than Class A equipment 6 1 More Information 6 2 Power Saving Function This product provides a power saving function that automatically turns the screen off when the product is not used for a predetermined period of time to reduce power consumption If the product enters power saving mode the power LED turns to a different colour to indicate that the product is in power saving mode When the product is in power saving mode the power is not turned off and you can turn the screen on again by pressing any key or clicking the mouse However the power saving function only works when the product is connected to a computer that provides the power saving function POWER SAVING MODE UA NG NORMAL OPERATION DPM DISPLAY POWER ikan cea MANAGEMENT Power LED On Blinks Off Power XL2270HD 38 watts Consumption Less th
30. TV Ext Com Colour Tint G R Advanced Set Picture Picture Reset ponent HDMI tings Options Sound Mode Equalizer SRS TruSur Audio Lan Audio Format Audio Descrip round HD guage tion Auto Volume Speaker Select Sound Reset Channel Country Auto Store Manual Store Cable Search Now amp Next Full Guide Option Guide Default Guide Channel List Channel Mode Fine Tune Setup Plug amp Play Language Time Game Mode Child Lock Change PIN Parental Lock Subtitle Teletext Lan Preference Digital Text Light Effect guage Light Level Melody Energy Saving Common Inter face Input Source List Edit Name Application Anynet HDMI CEC Support Self Diagnosis Software HD Connection Contact Sam Upgrade Guide sung Picture PC DVI MagicBnght MagicAngle Sontrest Brightness Sharpness Auto Adjustment The default setting may be different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution Using the Product 3 5 MENU DESCRIPTION MagicBright lt MagicBright gt is a feature providing an optimum viewing environment depending on the contents of the image you are watching Currently five different modes are available lt Entertain gt lt Internet gt lt Text gt lt Dynamic Contrast gt and lt Custom gt Each mode has its own pre configured brightness value e lt Entertain gt High Brightness For watchi
31. an 2 watts Less than 1 watts XL2370HD 38 watts e If there is no power cut off switch the power consumption is O only when the power cord is disconnected e DPM Display Power Management Function does not work if you used in conjunction with the HDMI port of this product More Information 6 2 6 3 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre EUROPE AUSTRIA 0810 SAMSUNG 7267864 E 0 07 min http www samsung com BELGIUM 02 201 24 18 http www samsung com be Dutch http www samsung com be fr French CZECH 800 SAMSUNG 800 726786 http www samsung com Distributor pro Ceskou republiku Samsung Zrt Ceska organiza n slo ka Oasis Florenc Sokolov ska394117 180 00 Praha 2 DENMARK 70 70 1970 http www samsung com EIRE 0818 717100 http www samsung com ESTONIA 800 7267 http www samsung com FINLAND 030 6227 515 http www samsung com FRANCE 01 48 63 00 00 http www samsung com GERMANY 01805 SAMSUNG 726 7864 0 14 http www samsung com Min HUNGARY 06 80 SAMSUNG 726 7864 http www samsung com ITALIA 800 SAMSUNG 726 7864 http www samsung com LATVIA 8000 7267 http www samsung com LITHUANIA 8 800 77777 http www samsung com LUXEMBURG 26103710 http www samsung com NETHERLANDS 0900 SA
32. ark room A Press the TOOLS button to display the Tools menu You can also set the lt Picture Mode gt by selecting lt Tools gt lt Picture Mode gt MagicAngle This feature allows you to see optimal screen quality according to your viewing position When viewing the screen at an angle from below above or the side of the monitor by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front e Set to lt Off gt when viewing directly in front of the screen e The lt TV gt lt Component gt lt EXT gt and lt HDMI gt modes only support the lt Lean Back Mode1 gt and lt Lean Back Mode2 gt menus A Press the TOOLS button to display the Tools menu You can also set the lt MagicAngle gt by selecting lt Tools gt lt MagicAngle gt 3 5 Using the Product MENU DESCRIPTION Backlight Contrast Brightness Sharp ness Colour Tint G R Advanced Settings Your product has several setting options that allow you to control the picture quality e lt Backlight gt Adjusts the brightness of LCD back light e lt Contrast gt Adjusts the contrast level of the picture e lt Brightness gt Adjusts the brightness level of the picture e lt Sharpness gt Adjusts the edge definition of the picture e lt Colour gt Adjusts colour saturation of the picture e Tint G R gt Adjusts the colour tint of the picture ce
33. d Refer to Connecting to a Computer Check the volume level The sound level is too low Check the volume level If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software programme PROBLEMS RELATED TO REMOTE CONTROL The remote control buttons do not respond Check the battery polarities Check if the batteries have been exhausted Check if the power is on Check if the power cord is securely connected Check if a special fluorescent or neon lamp is on in the vicinity Troubleshooting 5 2 NOTE ON THE PRODUCT APPEARANCE You may see small particles if you look closely at the edge of the bezel surrounding the screen This is part of the product s design and is not a defect 5 2 Troubleshooting 5 3 FAQ FAQ PLEASE TRY THE FOLLOWING How can change the frequency of the video sig nal You have to change the frequency of the graphics card For more information refer to the User Manual of the computer or the graphics card How can change the resolution Windows XP Change the resolution by selecting Control Panel Appear ance and Themes Display Settings Windows ME 2000 Change the resolution by selecting Control Panel Appearance and Themes Display Settings Windows 7 Change the resolution by selecting Control Panel Appear ance and
34. djust a value in the OSD Press to change the channel O OF Press this button to turn the product on or off Power LED This LED is turned on when the product works normally For information about the power saving function refer to the power saving function section of the product specifications When not using the product for a long time unplugging the power cord is recommended to minimize power consumption O Speakers Using the Product 3 2 3 3 Remote Control The performance of the remote control may be affected by a TV or other electronic device operating near the product causing a malfunction due to interference with the frequency Q POWER TY Turns the product On Off Y C3 Selects the TV mode directly E3 Number Buttons afefe PRE CH Press to change the channel KB 5 6 This button is used to return to o the immediately previous chan ca o nel D g 13 i 1 wu 500 mm eure ME lels Activates a highlighted menu item mag 4E Press to temporarily cut off the B sound T di 16 EC CO Press to increase or decrease the aN lt 18 Press to change channels volume Si gt o CH LIST PO A SOURCE t displaye C bannel LIS on ihe Press the button to change the nee im oy 70 input signal SOURCE Cine enp 1 Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time MD
35. elevision channels including those received via cable networks When storing channels manually you can choose Whether or not to store each of the channels found The Programme number of each stored channel which you wish to identify e lt C gt Air channel mode You can select a channel by entering the assigned number to each air broadcasting station in this mode e lt S gt Cable channel mode You can select a channel by entering the assigned number for each cable channel in this mode e lt Search gt When you do not know the channel numbers Press the A or V button to start the search The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen e lt Store gt When you store the channel and associated programme number It s used to restore the number user inputs Set to OK by pressing the button Using this function you can manually add the channel range to be scanned by full search mode of the lt Auto Store gt function lt Frequency Start Stop gt Displays the frequency for the channel lt Modulation gt Displays available modulation values lt Symbol Rate gt Displays available symbol rates Using the Product 3 5 MENU DESCRIPTION Now amp Next Guide Full Guide Default Guide The EPG Electronic Programme Guide information is provided by the broadcasters Programme entries may appear blank or out of date as a result of t
36. environment you can watch digital broadcasts with your existing indoor antenna If not it is better to install an outdoor antenna Troubleshooting 5 3 6 More Information 6 1 Specifications MODEL NAME XL2270HD XL2370HD LCD Panel Screen Size 21 53 inches 54 cm 23 inch 58 cm Display Area 476 64 mm H X 268 11 mm V 18 77 509 76 mm H X 286 74 mm V 20 07 inch X 10 56 inch inch X 11 29 inch Pixel Pitch 0 24825 mm H X 0 24825 mm 0 2655 mm H X 0 2655 mm V 0 01 V 0 01 inch X 0 01 inch inch X 0 01 inch Synchroniza Horizontal Frequency 30 81 kHz yon Vertical Frequency 56 75 Hz Colour 16 7M Optimal Resolution 1920 x 1080 60 Hz Resolution Maximum Resolution 1920 x 1080 60 Hz Input Signal Terminated RGB analogue DVI Digital Visual Interface 0 7 Vp p 5 Separate Type H V Sync Composite TTL Level V high 2 2 0 V V low lt 0 8 V Maximum Pixel Clock 162 000 MHz Analogue Digital Power Voltage This product supports 100 240 V Since the standard voltage may differ from country to country please check the label on the back of the product Dimension Width x Height x Depth Weight 536 3 x 345 2 x 66 1 mm 21 1 x 13 6 x 2 6 inch Without Stand 4 4 kg 9 7 Ibs 536 3 x 403 0 x 189 5 mm 21 1 x 15 9 x 7 5 inch With Stand 4 8 kg 10 6 Ibs 571 0 x 364 6 x 65 5 mm 22 5 x 14 4 x 2 6 inch Without
37. eral instructions For exact instructions see the User Manual supplied with the locking device e You can purchase the locking device from an electronics store or an online shop 2 13 Installing the Product 3 Using the Product 3 1 Plug amp Play Feature Plug amp Play Select the OSD Language Manu Language English E Enter When the TV is initially powered on basic settings proceed automatically and subsequently 1 Press the POWER t6 button on the remote control e You can also use the button on the TV e The message lt Select the OSD Language is displayed 2 Press the button Select the appropriate language by pressing the A or V button Press the button to confirm your choice 3 Press the lt or gt button to select Store Demo or lt Home Use gt then the L button We recommend setting the TV to Home Use mode for the best picture in your home environment e lt Store Demo mode is only intended for use in retail environments If the unit is accidentally set to lt Store Demo mode and you want to return to lt Home Use gt Standard Press the volume button on the TV When the volume OSD is displayed press and hold the MENU button on the TV for 5 seconds 4 Press the button Select the appropriate country by pressing the A or V button Press the L button to confirm your choice 5 Press the A or V button to select lt Air gt or lt Cable gt then
38. es e g charger headset USB cable should not be disposed of with other household waste at the end of their work ing life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal CORRECT DISPOSAL OF BATTERIES IN THIS PRODUCT EUROPE ONLY Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be dis posed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the envi ronment To protect natural resources and to promote material reuse
39. g from the left or right position A Press the TOOLS button to display the Tools menu You can also set the lt MagicAngle gt by selecting lt Tools gt lt MagicAngle gt Contrast Brightness Sharpness You can use the on screen menus to change the contrast and brightness according to personal pref erence e lt Contrast gt Adjust the Contrast e lt Brightness gt Adjust the Brightness e lt Sharpness gt Adjust the Sharpness Not available when lt MagicBright gt is lt Dynamic Contrast gt 3 5 Using the Product MENU DESCRIPTION Auto Adjustment The values of lt Fine gt lt Coarse gt and lt Position gt are adjusted automatically By changing the resolution in the control panel auto function is performed Available in lt PC gt Mode Only J Press the TOOLS button to display the Tools menu You can also set the auto adjustment by selecting lt Tools gt lt Auto Adjustment Screen e lt Coarse gt Removes noise such as vertical stripes lt Coarse gt adjustment may move the screen image area You may relocate it to the center using the horizontal control menu e lt Fine gt Removes noise such as horizontal stripes If the noise persists even after lt Fine gt tuning repeat it after adjusting the frequency Coarse e lt PC Position Adjusts the screen location horizontally and vertically e s mage Reset Image parameters are replaced wit
40. h the factory default values Available in lt PC gt Mode Only Picture Options e lt Colour Tone The tone of the Colour can be changed o Available in lt PC gt lt DVI gt mode only e Not available when lt MagicBright gt is lt Dynamic Contrast gt e lt Cool gt lt Normal gt lt Warm gt lt Custom gt e lt R Gain gt lt G Gain gt lt B Gain gt Adjusts the individual R G B Red Green Blue Colour controls es Not available when lt MagicBright gt is lt Dynamic Contrast gt e lt Size gt You can switch the Size e lt 16 9 gt lt 4 3 gt A Press the TOOLS button to display the Tools menu You can also set the auto adjustment by selecting lt Tools gt lt Picture Size gt Picture Reset Picture parameters are replaced with the factory default values e Reset Picture Mode lt Cancel gt Using the Product 3 5 Picture TV Ext Component HDMI Moda MagiAngle Backlight Contrast Brightness Sharpness Colour MENU DESCRIPTION Mode You can select the type of picture which best corresponds to your viewing requirements You can activate either lt Dynamic gt lt Standard gt or lt Movie gt e lt Dynamic gt Selects the picture for high definition in a bright room e lt Standard gt Selects the picture for optimum display in a normal environment e lt Movie gt Selects the picture for viewing movies in a d
41. he EXT RGB port of the monitor to the DVD Player using a SCART jack 2 When a Scart device is connected to your monitor the Source automatically changes to EXT Connect to the DVD Devices input if the device has a EXT RGB jack e You can watch DVD simply by hooking up the DVD player with the monitor as long as the power is on Installing the Product 2 10 2 11 Connecting COMMON INTERFACE 1 Insert the CI CARD into the CAM in the direction of the arrow until it fits 2 Insert the CAM with the CI CARD installed into the common interface slot Insert the CAM in the direction of the arrow right up to the end so that it is parallel with the slot 3 Check if you can see a picture on a scrambled signal channel r air is ES When not inserting CI CARD in some channels Scrambled Signal is displayed on the screen e The pairing information containing a telephone number CI CARD ID Host ID and other information will be displayed in about 2 3 minutes If an error message is displayed please contact your service provider e When the channel information configuration has finished the message Updating Completed is displayed indicating that the channel list is now updated e You must obtain a CI CARD from a local cable service provider Remove the Cl CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it e Insert the Cl Ca
42. he information broadcast on a given channel The display will dynamically update as soon as new information becomes available You can also display the guide menu simply by pressing the GUIDE button To configure the lt Default Guide gt refer to the descriptions e lt Now 8 Next Guide For the six channels indicated in the left hand column displays the Current programme and the Next programme information e Full Guide Displays the programme information as time ordered One hour segments Two hours of programme information is displayed which may be scrolled forwards or backwards in time The programme title is on the upper part of the screen center Please click on INFO button for the detailed information Channel Number Running Time Status Bar Parental Level Video Quality Information HD SD Sound Modes Subtitle or Teletext Languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information will be appeared if the summary is long e Six channels are displayed To scroll between channels move to a channel using the A or V button e lt Default Guide You can decide whether to display either the lt Now amp Next Guide gt or the lt Full Guide gt when the GUIDE button on the remote control is pressed e Now amp Next gt lt Full Guide 3 5 Using the Product MENU DESCRIPTION Channel List Using this menu
43. he number of devices found are not displayed Although the TV automatically searches the device list when the TV is turned on via the power button devices connected to the TV may not always be automatically displayed in the device list Press the red button to search for the connected device If you have selected external input mode by pressing the SOURCE button you cannot use the lt Anynet gt function Make sure to switch to an lt Anynet gt device by using the lt Device List gt Support 7 Self Diagnosis Software Upgrade HO Connection Guide Contact Samsung Using the Product 3 5 MENU DESCRIPTION Self Diagnosis lt Picture Test gt If you think you have a picture problem perform the picture test Check the colour pattern on the screen to see if the problem still exists e lt Yes gt If the test pattern does not appear or there is noise in the test pattern select lt Yes gt There may be a problem with the TV Contact Samsung s call centre for assistance e lt No gt If the test pattern is properly displayed select lt No gt There may be a problem with your external equipment Please check your connections If the problem still persists refer to the external device s user manual lt Sound Test gt If you think you have a sound problem please perform the sound test You can check the sound by playing a built in melody sound through the TV e Yes If during the sound test you ca
44. he tone of the colour can be changed e lt Cool gt lt Normal gt lt Warm1 gt lt Warm2 gt e sWarm17 or lt Warm2 gt is only activated when the picture mode is lt Movie gt e Settings can be adjusted and stored for each external device you have connected to an input of the TV lt Size gt You can switch the Size e lt Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio e lt 16 9 gt Adjusts the picture size to 16 9 appropriate for DVD or wide broadcasting e lt Wide Zoom Magnify the size of the picture more than 4 3 e lt Zoom gt Magnifies the 16 9 wide picture in the vertical direction to fit the screen size e lt 4 3 gt This is the default setting for a video movie or normal broadcasting e Screen Fit Use the function to see the original image with no cut off with HDMI 720p 1080i 1080p or Component 1080i 1080p signals are input x Press the TOOLS button to display the lt Tools gt menu You can also set the size by selecting lt Tools gt lt Picture Size gt e Depending on the input source the picture size options may vary e The items available may differ depending on the selected mode e Settings can be adjusted and stored for each external device you have connected to an input of the TV e lt Wide Zoom gt Press the B button to Select Position then press the L button Press the A or V button to move the picture up down Then press the L button e
45. hen cleaning the product do not spray IF power cord water directly over the product parts e Make sure that water does not enter the product D e Otherwise it may result in electric shock US or fire e Otherwise it may result in fire electric shock or a problem with the product Major Safety Precautions 1 3 A N Caution Avoid spraying cleansing agent directly onto the product e This may result in discoloration or cracking of the exterior of the productor the panel coming off If you can t get the product clean with just the supplied cloth use a soft damp cloth with a monitor exclusive cleansing agent and wipe the product with it e If no monitor exclusive cleansing agent is available dilute a cleansing agent with water at a ratio of 1 10 before cleaning the product Usage Related A Warning Since a high voltage runs through the prod uct never disassemble repair or modify the product yourself e Otherwise it may result in fire or electric shock e f the product needs to be fixed contact a service centre If the product generates a strange noise a burning smell or smoke unplug the power plug immediately and contact a service cen tre e Otherwise it may result in electric shock or fire If you drop the product or the case is dam aged turn the power off and unplug the power cord Contact a service centre e Otherwise it may result
46. le Search Option Now amp Mexi Guide Full Gude Default Guide Full Guide MENU DESCRIPTION Country Select the country in which the product is being used before you use the Auto Store feature If you do not see your country in the list select others e Digital Channel gt You can change the country for digital channels e lt Analogue Channel gt You can change the country for analogue channels The PIN number input screen appears Enter your 4 digit PIN number Auto Store You can scan for the frequency ranges available to you and availability depends on your country Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked using the lt Child Lock function the PIN input window appears e hir Cable gt Antenna source to memorise e Digital amp Analogue gt Digital and Analogue channels e Digital gt Digital channels e lt Analogue gt Analogue channels When selecting lt Cable gt lt Digital amp Analogue gt or lt Cable gt lt Digital gt Provide a value to scan for cable channels e lt Search Mode gt Full Network Quick Quick e Network ID gt Displays the network identification code e Frequency Displays the frequency for the channel Differs in each country e lt Modulation gt Displays available modulation values e sSymbol Rate Displays available symbol
47. leak occurs do not touch the product or the power plug and ventilate immediately e A spark may result in an explosion or fire e During a thunder or lighting storm do not touch the power cord or antenna cable Avoid using or placing inflammable spray or objects near the product e This may result in an explosion or fire Avoid inserting metal objects such as a chopsticks coins or hairpins or inflamma ble objects into the product the vents ports etc e f water or substances enters the product turn the power off unplug the power cord and contact a service centre e Otherwise it may result in a problem with the product electric shock or fire When not using the product for a long time such as leaving your home unplug the power cord from the wall outlet e Otherwise it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock Avoid turning the product upside down or move the product holding only the stand e This may cause the product to fall resulting in damage to the product or injury Avoid using a humidifier or cooker near the product e Otherwise it may result in electric shock or fire Since the display panel is hot after using it for a long time do not touch the product Major Safety Precautions Maintaining the Correct Posture when Using this Product LAN Keep the small accessories in a location
48. llation not performed by an authorized installation engineer When installing the product using a wall mount purchase a wall mount that provides at least 10 cm 3 93 inches of space from the wall Use the wall mount according to the international specifications Installing the Product 2 4 2 5 Connecting to a Computer 1 Connect the product to a PC depending on the video output supported by the PC The connecting part may differ depending on the product model When the graphics card provides a D Sub analogue output e Connect the PC IN port of the product to the D Sub port of the PC with the D Sub cable When the graphics card provides a DVI digital output e Connect the DVI D IN port of the product to the DVI port of the PC with the DVI cable When the graphics card provides a HDMI output 2 5 Installing the Product e Connect the HDMI IN port of the product to the HDMI port of the PC with the HDMI cable Installing the Product 2 Connect the HDMI PC DVI D AUDIO IN port on the rear side of the monitor to the sound card of the PC TT ib ki ba AUDIO je 3 To use the monitor connect the power cable to a power outlet and the POWER port on the monitor The input voltage is switched automatically e You may enjoy clear and quality sound from the computer sound card using the monitor s speakers You don t need to install separate speakers for your computer You
49. lling the Product 2 4 Attaching a Wall Mount Desktop Stand Attaching a Wall Mount Desktop Stand not supplied This product provides a stand mount of 75 mm x 75 mm 2 95 x 2 95 inch that complies with the VESA specifications A Wall Desktop Stand Mount B Wall mount kit desktop stand not supplied Turn the product off and unplug the power cord from the wall outlet Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down Remove the screw from the stand and separate the stand IB Align the groove of the part of the product that is to be connected to the stand with the groove in the stand desk top stand wall mount stand or another stand and firmly fix the stand by fastening the screw ah elf you use screws that are longer than the standard specifications the inside of the product may be damaged For wall mounts that are not compatible with the standard VESA specifications the length of the screw may differ depending on the corresponding specifications eAvoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive force This may result in damage to the product or injury due to the product falling Samsung shall not be held liable for any damage or injury Samsung shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with the specifications or due to an insta
50. lling the Software 1 Insert the installation CD into the CD ROM drive 2 Select the MultiScreen setup programme Ifthe pop up screen for the software installation does not appear on the main screen find and double click the MultiScreen setup file on the CD ROM 3 When the Installation Wizard appears click Next 4 Complete the remaining software installation steps according to the instructions displayed on the screen The software may not work properly if you do not restart the computer after the installation e The MultiScreen icon may not appear depending on the computer system and the product specifications e If the shortcut icon does not appear press the F5 key MultiScreen Installation Requirements The MultiScreen installation may be affected by the graphics card motherboard and the networking environment Operating System OS e Windows 2000 e Windows XP Home Edition e Windows XP Professional e Windows Vista e Windows 7 32Bit amp For MultiScreen Windows 2000 or later operating systems are recommended Hardware e Atleast 32MB of memory e At least 60MB of free space on the hard disk drive Removing the Software Click Start select Settings Control Panel and then double click Add or Remove programmes Select MultiScreen from the programme list and click the Add Delete button Installing the Software 4 2 5 Troubleshooting 5 1 Monitor Self Diagnosis e You can check if the
51. lt Zoom gt Press the B button to Select Position then press the L button Press the A or V button to move the picture up and down Then press the button Press the gt button to Select Size then press the L button Press the A or V button to magnify or reduce the picture size in the vertical direction Then press the button e After selecting Screen Fit gt in HDMI 10801 or Component 1080i mode Select Position by pressing the lt or gt button Use the A WV lt or gt button to move the picture e Reset Press the lt or gt button to select lt Reset gt then press the 4 button You can initialize the setting e If you use the lt Screen Fit gt function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the Overscan function lt Screen Mode gt Digital Noise Reduction Only when setting the picture size to lt Auto Wide gt can the user determine the lt Screen mode gt Each individual European country requires a different picture size so this function is intended to help users to select it e lt 16 9 gt Sets the picture to 16 9 wide mode e lt Wide Zoom Magnify the size of the picture more than 4 3 e lt Zoom gt Magnify the size of the picture vertically e 84 35 Sets the picture to 4 3 normal mode This function is available in lt Auto Wide gt mode This function is not available in lt PC DVI gt lt Component gt or lt HDMI gt mode
52. may get a blank screen depending on the type of video card you are using if you connect the D sub and DVI cables simultaneously to one computer If you connect your monitor properly using the DVI connector but get a blank or fuzzy screen check to see if the monitor status is set to analogue Press L button to have the monitor double check the input signal source Installing the Product 2 6 Using itasaTV You may view television programmes on the monitor if it is connected to an antenna or cable satellite system without installing any separate TV reception hardware or software on your computer ANT IM 1 Connect the cable satellite or TV antenna cable to the ANT IN port on the rear side of the monitor e When using an indoor antenna cable satellite terminal Check the antenna terminal on the wall and then connect the antenna cable satellite TV cable e When using an outdoor antenna When using an outdoor antenna we strongly suggest using a qualified technician to install it 2 When the connections are completed connect the TV power 3 When the product is turned on for the first time after it was purchased the initial setup operations lt Plug amp Play gt begin Be careful that the coaxial cable is not bent when connecting it to the antenna input terminal ANT IN Installing the Product 2 6 2 Connecting an HDMI cable Connect the HDMI OUT port of the AV device Blu ray DVD Cable Satellite box to the HD
53. mer gt To cancel the lt Sleep Timer gt function select lt Off gt lt Timer1 Timer2 Timer3 gt Three different on off timer settings can be made You must set the clock first e lt On Time gt Set the hour minute and lt activate inactivate gt To activate the timer with the setting you ve chosen set to Activate e lt Off Time gt Set the hour minute and lt activate inactivate gt To activate the timer with the setting you ve chosen set to Activate e lt Volume gt Set the desired volume level e lt Antenna gt View antenna type lt Air gt or lt Cable gt You can set the lt Antenna gt by selecting lt Channel gt lt Antenna gt e lt Channel gt Select the desired channel e Repeat Select lt Once gt lt Everyday gt lt Mon Fri gt lt Mon Sat gt lt Sat Sun gt or lt Manual gt e When lt Manual gt is selected press the button to select the desired day of the week Press the L button over the desired day and the v mark will appear e You can set the lt hour gt lt minute gt and channel by pressing the number buttons on the remote control e lt Auto Power Off gt When you set the timer On the television will eventually turn off if no controls are operated for 3 hours after the TV was turned on by the timer This function is only available in timer On mode and prevents overheating which may occur if a TV is on for too long time 3 5
54. n hear sound only from one speaker or not at all select lt Yes gt There may be a problem with the TV Contact Samsung s call centre for assistance e Nos If you can hear sound from the speakers select lt No gt There may be a problem with your external equipment Please check your connections If the problem still persists refer to the external device s user manual Ifyou hear no sound from the TV s speakers before performing the sound test make sure lt Speaker Select gt is set to lt TV speaker gt in the lt Sound gt menu e The melody will be heard during the test even if Speaker Select gt is set to lt External Speaker gt or the sound is muted by pressing the MUTE button lt Signal Information gt digital channels only Unlike analogue channels which can vary in reception quality from snowy to clear digital HDTV channels have either perfect reception quality or you will not receive them at all So unlike analogue channels you cannot fine tune a digital channel You can however adjust your antenna to improve the reception of available digital channels Ifthe signal strength meter indicates that the signal is weak physically adjust your antenna to increase the signal strength Continue to adjust the antenna until you find the best position with the strongest signal Software Upgrade lt By USB gt Insert a USB drive containing the firmware upgrade downloaded from samsung com into the TV
55. ng motion pictures such as a Blu Ray or DVD e Internet For working with a mixture of images such as texts and graphics e lt Text gt For documents or work involving heavy text e lt Dynamic Contrast gt lt Dynamic Contrast gt automatically detects the distribution of the visual signal and adjusts to create an optimum contrast e Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the Brightness and Contrast by using the OSD menu A Press the TOOLS button to display the lt Tools gt menu You can also set the lt MagicBright gt by selecting lt Tools gt lt MagicBright gt MagicAngle This feature allows you to see optimal screen quality according to your viewing position When viewing the screen at an angle from below above or the side of the monitor by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front o Set to lt Off gt when viewing directly in front of the screen lt Off gt Select when viewing from the front position e lt Lean Back Mode1 gt Select when viewing from a slightly lower position e Lean Back Mode2 gt O Select when viewing from the lower position e lt Standing Mode O Select when viewing from the upper position SSide Mode gt Select when viewin
56. o sound is output from the TV because the MUTE button has been pressed e When no sound is output from the TV because the volume has been reduced to minimum with the volume button e When the TV is turned off by lt Sleep Timer function Energy Saving This feature adjusts the brightness of the TV in order to reduce power consumption When watching TV at night set the sEnergy Saving mode option to High to reduce eye fatigue as well as power consumption e lt Off gt Turns off the energy saving function e sLows Sets the TV to low energy saving mode e Medium Sets the TV to medium energy saving mode e High Sets the TV to high energy saving mode e lt Auto gt Automatically adjusts the brightness of the TV screen in accordance with the scenes A Press the TOOLS button to display the lt Tools gt menu You can also set the sEnergy Saving option by selecting lt Tools gt Energy Saving Common Interface e lt Cl Menu This enables the user to select from the CAM provided menu Select the CI Menu based on the menu PC Card e SApplication Info gt This contains information on CAM inserted in the Cl slot and displays it The Application Info inserting is about the Cl CARD You can install the CAM anytime whether the TV is ON or OFF CAM is not supported in some countries and regions check with your authorized dealer Source List Edit Name 3 5 Using the Product M
57. out of the reach of children Avoid placing a heavy object over the prod uct e Otherwise it may result in a problem with the product or injury Be careful that children do not place the bat teries in their mouths when removed from the remote control Place the battery in a location that children or infants cannot reach e If children have had the battery in their mouths consult your doctor immediately Use only specified standard batteries Do not use new and used batteries together e This may cause a battery to break or leak and may cause fire injury or contamination damage Take care when adjusting the angle of the product or the height of the stand e f your hand or finger is caught you may be injured e If the product is tilted excessively the product may fall and this may result in injury When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing When replacing the batteries insert them with right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid The batteries and rechargeable batteries are not ordinary refuse and must be returned for recycling purposes The cus tomer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to a nearby p
58. power cord If the pins of the power plug or the wall out let are covered in dust clean it using a dry cloth e Otherwise it may result in fire Major Safety Precautions A Caution Avoid unplugging the power plug while the product is operating Make sure to use only the power cord sup plied by our company In addition do not use h f h i li Otherwise it may damage the product the power cord of another electric appliance due to electric shock e Otherwise it may result in electric shock or fire When unplugging the power plug from the Connect the power plug to a wall outlet that wall outlet make sure to hold it by the plug can be easily reached and not by the cord When a problem occurs with the product e Otherwise it may result in electric shock you must unplug the power plug to cut or fire the power off completely You cannot cut the power off completely using only the power button on the product Installation Related A Warning Avoid placing burning candles mosquito repellentor cigarettes on the product Ask an installation engineer or relevant company to install the product onto the wall e Otherwise it may result in fire e Otherwise it may result in injury e Make sure to use the specified wall mount Avoid installing the product in a badly venti firs lated location such as inside a bookshelf or Fa HA closet Keep a distance of at least 10 cm 3 93 inches f
59. product is working properly using the Self Diagnosis function e If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected perform the self diagnosis function according to the procedures below Turn the product and the PC off Remove the D Sub cable from the product Turn the product on p Noo If the product is working properly the lt Check Signal Cable gt message appears In this case if a blank screen is displayed again make sure that there is no problem with the PC and the connection 5 1 Troubleshooting 5 2 Before Requesting Service Please check the following before requesting After Sales service If the problem continues please contact your nearest Samsung Electronics Service Centre PROBLEMS RELATED TO INSTALLATION PC MODE The monitor screen flickers Check if the signal cable between the computer and the monitor is securely connected and tightened Refer to Connecting to a Computer PROBLEMS RELATED TO SCREEN Screen is blank and power indicator is off Check Signal Cable message Ensure that the power cord is firmly connected and the LCD monitor is on Refer to Connecting to a Computer Ensure that the signal cable is firmly connected to the PC or video sources Refer to Connecting to a Computer Not Optimum Mode message Check the maximum resolution and the frequency of the video adapter Compare these value
60. ptimal quality for the HDTV Refer to this information when connecting external devices to the TV Contact Samsung View this information when your TV does not work properly or when you want to upgrade the soft ware You can view the information regarding the call centre product and software file download method Using the Product 3 5 3 6 Installing the Device Driver If you install the device driver you can set up the appropriate resolution and frequency for the product The device driver is included on the CD supplied with the product If the supplied drive file is corrupted please visit the Samsung Electronics website www samsung com and download the driver Insert the driver installation CD into the CD ROM drive Click on Windows Driver Complete the remaining installation steps according to the instructions displayed on the screen p p a Select the model of your product from the model list i SAMSUNG manitor mether Select the display adaptar on which you wanno intall the monitor 5 Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings For more information refer to the document about the Windows operating system 3 6 Using the Product 3 Standard Signal Mode Table An LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel unlike a CDT monito
61. r Therefore the visual quality will be degraded if the optimal resolution is not set for the panel size It is recommended setting the resolution to the optimal resolution of the product PC Timing D Sub and HDMI input If the signal from the PC is one of the following standard signal modes the screen is set automatically However if the signal from the PC is not one of the following signal modes a blank screen may be displayed or only the Power LED may be turned on Therefore configure it as follows referring to the User Manual of the graphics card CLOCK RESOLUTION RECENT KA EGUENA FREQUENCY POLARITY H V MHZ IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 96 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 X 800 49 702 59 810 83 500 VESA 1280 X 960 60 000 60 000 108 000 VESA 1280 X 1024 63 981 60 020 108 0
62. rates Scans for all channels with active broadcast stations and stores them in the TV s memory 3 5 Using the Product MENU DESCRIPTION Manual Store Cable Search Option depending on the country You can scan the frequency ranges available on your television in your area and store all the chan nels found manually lt Digital Channel gt Manual store for digital channels e lt Channel gt Set the Channel number using the A or number 0 9 buttons e lt Frequency gt Set the frequency using the number buttons e lt Bandwidth gt Set the bandwidth using the A V or number 0 9 buttons Digital Channel is only available in DTV mode e When it has finished channels are updated in the channel list lt Analogue Channels Manual store for analogue channel e Programme Programme number to be assigned to a channel Inputting the appropriate programme number on the screen Sets the programme number using the A V or number 0 9 buttons e lt Colour System Adjusts repeatedly until the colour is of the best quality Sets the colour system value using the A or V button e lt Auto gt lt PAL gt lt SECAM gt lt NTSC4 43 gt e sSound System Adjusts repeatedly until the sound is of the best quality Sets the sound system value using the A or V button e lt BG gt lt DK gt lt gt lt L gt e Channels When you know the number of the channel to be stored You can store t
63. rd in the direction marked on it e CAM is not supported in some countries and regions check with your authorized dealer 2 11 Installing the Product 2 12 Connecting to an Amplifier Connect the DIGITAL AUDIO OUT OPTICAL terminal of your monitor to the optical input of your amplifier using an optical cable DIGITAL AUDIO OUT OPTICAL gt If no sound is emitted from the monitor you need to use an amplifier e For information on how to connect a speaker and amplifier refer to the respective user manuals provided by their manufacturers Installing the Product 2 12 2 13 Connecting Headphones Connect your headphones to the Headphone connection terminal 2 14 Kensington Lock A Kensington Lock is an anti theft device that enables users to lock the product so that they can safely use it in public locations Since the shape and usage of the locking device may differ depending on the model and the manufacturer refer to the User Manual supplied with the locking device for more information You must purchase the Kensington Lock separately To lock the product follow these steps 1 Wrap the Kensington lock cable around a large stationary object such as a desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the Monitor 0 4 Lock the lock These are gen
64. roduct by pulling the power cord or antenna cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Avoid lifting up or moving the product by holding only the power cord or signal cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Take care not to block the vent by a table cloth or curtain e Otherwise it may result in fire due to internal overheating Avoid placing a liquid container such as a vase flowerpot beverage cosmetics or drugs or a metal object over the product e f water or substances enter the product turn the power off unplug the power cord and contact a service centre e Otherwise it may result in a problem with the product electric shock or fire A Caution Displaying a still image for a long time may create a persistent image or stain on the screen e If you do not use the product for a long time use the power saving mode or set the screensaver to the moving picture mode Set the appropriate resolution and fre quency for the product e Otherwise it may result in eye strain Watching the product from too close a dis tance continuously may damage your eye sight It is important to give your eyes some rest 5 minutes every hour when viewing the prod uct screen for long periods of time e This will alleviate any eye strain When a gas
65. rom the wall when installing the product for ventilation Jas VY e Otherwise it may result in fire due to e Otherwise it may result in fire due to internal over heating internal over heating Keep the plastic bags used to pack the Avoid installing the product in a location that product away from children is unstable or exposed to excessive vibra h helf e If children place the plastic bags over tion such as on an unstable or slanted she their heads they may suffocate e The product may fall and this may result in damage to the product or injury e If you use the product in a location exposed to excessive vibrations it may result in a problem with the product or fire Avoid installing the product in a location exposed to dust moisture Sauna oil smoke or water rain drops and installing it within a vehicle Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fire place or heater e This may result in electric shock or fire e This may shorten the product life cycle or cause fire 1 3 Major Safety Precautions Avoid installing the product where children Bend the outdoor antenna cable downwards may reach it at the location where it comes in the house e fa child touches the product the so that rainwater does not flow in product may fall and this may result in o e If rainwater enters the product it may injury re
66. s used near it The appearance and the colour may differ depending on models Securing the Installation Space e Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature Install the product so the required distances shown in the figure are kept f The appearance may differ depending on the product When installing the product with a stand When installing the product with a wall mount fo 10cm 2 93 inches 10cm 393 inches 10cm 10cm 10cm ilOcm 3 93 inches 3inches 393inches 1 3 93 inches ck Fa I About persistent images e Displaying a still image for a long time may create a persistent image or stain on the screen If you do not use the product for a long time set the power saving mode or screen saver e Due to technological constraints of the LCD Panel manufacturer the images generated by this product may appear either brighter or darker than normal by appr 1ppm parts per million pixel The number of sub pixels of an LCD panel by size The number of Sub Pixels Max Horizontal Resolution x Max Vertical Resolution x 3 1 2 Major Safety Precautions 1 3 Safety Precautions Icons used for safety precautions ICON NAME MEANING Failing to follow the precautions marked with this sign may result in a serious injur
67. s with the data in the Standard Signal Mode Table Picture rolls vertically Check if the signal cable is securely connected Connect it again securely Refer to Connecting to a Computer Image is not clear Picture is blurred Run Frequency lt Coarse gt and lt Fine gt tuning Turn on again after removing all accessories video extension cable etc Set resolution and frequency to the recommended ranges Picture image is unstable and vibrates Ghost images are shown in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor If not reset them referring to the current lt Information gt under the monitor menu and Standard Signal Mode Table The image is too light or too dark Adjust the Brightness and Contrast Refer to the lt Brightness gt lt Contrast gt Screen is blank and the power indicator light blinks every 0 5 or 1 seconds The monitor is using its power management system Press a key on the keyboard The screen is blank and is blinking If you see the TEST GOOD message on the screen when you press the MENU button check the cable connection between the monitor and the computer to ensure that the connector is properly connected PROBLEMS RELATED TO AUDIO No sound Ensure that the audio cable is firmly connected to both the audio in port on your monitor and the audio out port on your sound car
68. sult in electric shock or fire e Since the front part is heavier install the product on a flat and stable surface Install the antenna far away from any high Op voltage cables 8o e f the antenna touches or falls onto a o high voltage cable it may result in electric shock or fire A Caution Do not let the product drop while moving it Do not place the product face down on the e This may result in a problem with the fi NG N 109R product or injury E e This may damage the panel of the Oo product When putting the product down handle it gently When installing the product on a console or shelf make sure that the front of the product does not protrude out of the console or shelf e Otherwise it may result in a problem with the product or injury e Otherwise this may cause the product to fall off and result in a malfunction or injury e Make sure to use a cabinet or shelf suitable to the size of the product If the product is installed in a location where the operating conditions vary considerably a serious quality problem may occur due to the surrounding environment In this case install the product only after consulting one of our service engineers about the matter e Places exposed to microscopic dust chemicals too high or low temperature high humidity airports or stations where the product is continuously used Cleaning Related A Warning Before cleaning the product unplug the W
69. t Off gt lt On gt Speaker Select If you want to hear the sound through separate speakers cancel the internal amplifier e External Speaker gt lt TV Speaker If you select lt External Speaker in the lt Speaker Select gt menu the sound settings will be limited e The volume and MUTE buttons do not operate when the lt Speaker Select gt is set to lt External Speaker gt Please set the volume on your Home theatre Sound Reset You can restore the lt Sound gt settings to the factory defaults e Reset All gt lt Reset Sound Mode lt Cancel gt Reset Sound Mode Current sound values return to default settings Selecting the Sound Mode You can set the sound mode in the lt Tools gt menu When you set to lt Dual I5 the current sound mode is displayed on the screen Audio Type Dual 1 2 DUAL 1 2 Mono MONO Automatic change A2 Stereo STEREO MONO Automatic change Stereo Dual DUAL 1 DUAL 2 DUAL 1 Mono MONO Automatic change NICAM Stereo MONO STEREO Automatic change Stereo MONO DUAL 1 Dual DUAL 1 t DUAL 2 ed If the stereo signal is weak and an automatic switching occurs then switch to the mono This function is only activated in stereo sound signal It is deactivated in mono sound signal This function is only available in TV mode Using the Product 3 5 Channel Country auwuey Auto Stare Manual Stare Cab
70. ublic recycling centre or to a store selling the same type of the battery or rechargeable battery Maintain the correct posture when using this product e Straighten your back e Keep your elbow at a right angle e Keep a distance of 45 50 cm 15 19 inches from your eyes to the screen Look down at the screen and face the screen forwards e Maintain the correct posture when using this product e Adjust the angle of the product so that light is not reflected onto the screen e Keep your elbow at a right angle and keep your arm level with the back of your hand e Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart 1 3 Major Safety Precautions 2 Installing the Product 2 1 Package Contents e Unpack the product and check if all of the following contents have been included e Store the packaging box in case you need to move the product at a later stage CONTENTS OI aay Quick Setup Guide Product Warranty Not available in all locations User Manual D Sub Cable Power Cord Batteries AAA X 2 Not available in all locations Stand Connector Stand Stereo Cable Cleaning Cloth Cable Holder SOLD SEPARATELY a es 1 DVI Cable The cleaning cloth is supplied with black high glossy models only
71. utage or is the power cord unplugged e Is there a special fluorescent light or neon sign nearby Using the Product 3 3 3 4 Teletext Feature Most television stations provide written information services via Teletext The index page of the teletext service gives you information on how to use the service In addition you can select various options to suit your requirements by using the remote control buttons For teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed You can change teletext pages by pressing the numeric buttons on the remote control o0 O exit Exit from the teletext display o index Used to display the index contents page at any time while you are viewing teletext O store Used to store the teletext pages 9 size Press to display the double size let ters in the upper half of the screen For lower half of the screen press it again To display normal screen press it once again 9 reveal Used to display the hidden text answers to quiz games for exam ple To display normal screen press it again O EI teletext on mix Press to activate teletext mode after selecting the channel providing the teletext service Press it twice to overlap the teletext with the current broadcasting screen 7 sub page Used to display the available sub page page
72. y Teletext Language of the Preference menu Digital Text Light Effect If the programme is broadcast with digital text this feature is enabled e lt Disable gt lt Enable gt UK only MHEG Multimedia and Hypermedia Information Coding Experts Group e An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includes data linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce tele education tele conferencing digital libraries and network games You can turn the LED on off on the front of monitor You can turn it off to save power e lt Off gt Activates the lt Light Effect gt LED only when a button is pressed e lt On gt Activates the lt Light Effect gt LED only while watching the TV Light Level Use to adjust the light level i e the brightness of the light e lt 1 gt lt 10 gt The higher the number the brighter the light of the LED emits Using the Product 3 5 MENU DESCRIPTION Melody A melody sound can be set to come on when the monitor is powered On or Off e lt Off gt lt Low gt lt Medium gt lt High gt The lt Melody gt does not play e When n
73. y or even a fatality Caution 3 Warning Failing to follow the precautions marked with this sign may result in a personal injury or property damage Meaning of Signs SO Do not perform Q Do not disassemble Q Do not touch Power Related Must be followed The power plug must be unplugged from the wall outlet Must be grounded to prevent electric shock 4b D The following images are for your reference and may differ depending on models and countries A Warning or fire or injury Keep the power cord and the product away from a heater c W e Otherwise it may result in electric shock O or fire e Otherwise it may result in electric Avoid using a damaged power cord or plug Avoid connecting multiple electric appli or a loose power outlet e Otherwise it may result in electric shock Ua e Otherwise it may result in fire due to ances to a single wall outlet overheating of the wall outlet Avoid plugging in or unplugging the power Plug the power plug in firmly supply with wet hands e Otherwise it may result in fire shock J Make sure to connect the power cord to a Avoid bending or twisting the power cord grounded wall outlet for insulation class 1 excessively and avoid placing heavy objects equipment only on the cord pe e Otherwise it may result in electric shock e Otherwise it may result in electric shock or fire due to a damaged

Samsung XL2270HD

Contents

Download Pdf Manuals

Related Search

Related Contents