Planar Systems PR6022
Contents
1. 1 5 Power Ova Temp Realy Power J aJ Source Auto 3 2 4 1 To enter the OSD press the Menu button 2 There are five menus Press the cursor 4 button to Display Mode move through the menus Brilliant Color Bright 3 Press the cursor A Y button to move and down in Sharpness Gamma 4 Press lt to change values for settings Advanced Reset 5 Press Menu to close the OSD or leave a submenu Note Depending on the video source not all items in the OSD are available For example the Horizon tal Vertical Position items in the Computer menu can only be modified when connected to a PC Items that are not available cannot be accessed and are grayed out 18 DLP Projector User s Manual Setting the OSD Language Set the OSD language to your preference before continuing 1 Press the Menu button Press the cursor lt button to navigate to Installation LJ Ga efi Image Computer Video Audio Installation Il Menu Exit Menu Select 4 gt Scroll a wv Language English Menu Exit Item Adjust 4 Scroll w 3 Press the cursor 4 button until the language you want is highlighted 4 Press the Menu button twice to close the OSD 19 DLP Projector User s Manual OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting2. Ready cy CJ Power Menu c a EM Auto 7 8 9 Item Label Description See page 1 Power Turns the projector or 11 2 Up cursor Navigates and changes settings in the OSD IS Green Power On 3 Power LED Off Power Off AC Off Flashing Error code On System over temperature 4 Over Temp LED Normal State Orange Lamp is ready to be powered on 5 Ready LED Flashin Lamp not ready Warm up shutting down cooling 9 see LED Error Messages page 42 6 Menu Open and exits the OSD buttons 7 lt Left cursor Detects the input device i Source Navigates and changes settings in the OSD 46 8 Y Down cursor Navigates and changes settings in the OSD 9 gt Right cursor Optimizes image size position and resolution Auto Navigates and changes settings in the OSD DLP Projector User s Manual Rear view 7 o 7 USB AUDI VIDE VIDE R ACIN ac Item Label Description See page 1 AC IN Connect the power cable 11 Connect the USB cable from computer 2 USB Service Only service 3 AUDIO Connect the AUDIO CABLE from the in
3. 15 DLP Projector User s Manual Adjusting the Zoom Focus and Keystone 1 Use the Image zoom control on the projector only to resize the pro jected image and screen size Use the Image focus control on the projector only to sharpen the projected image keystone control appears on the display auoj shoy N Keystone 16 Remote control OSD panel 0 DLP Projector User s Manual uh 9 oo Freeze Adjusting the Volume 1 Press the Volume buttons on the remote control The volume control appears on the display A lt E o 5 Power OvaTemp Ready Power Menu 2 Press the Left or Right a buttons djust Vol CJ CJ Co Source Aulo 3 Press the Mute button to turn off the volume This feature is avail able only on the remote 17 DLP Projector User s Manual On Screen Display OSD Menu Settings OSD Menu Controls The projector has an OSD that lets you make image adjustments and change various settings Navigating the OSD You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make changes to the OSD The following illustration shows the corresponding buttons on the re mote control and on the projector
4. 6 Ne HERES 42 aiam aereo esconde 43 REMOTE CONTROL PROBEEMS eomm amati eam a 43 AUDIO PROBEEMS bet o AES 43 vi Preface Check the qudio cable e M ecHhoOh Susu 43 HAVINGTHE PROIECTOR SERVICED 43 Eluzeldevle E 44 44 PROJECTION DISTANCE VS PROJECTION SIZE 44 Projection Distance and Size 44 TIMING MODE TABLES hatu maaan chaka 45 PROJEGPORIDIMENSI NS ICS 47 REGULATORY COMPLIANCE J L 48 ECC WARNING 2 bassana 48 SABELY CERTIFICATIONS 2 eet tee Wek vee buchen ue Beebe Bet eve de suche tee Sui ayu 48 EN 55022 WARNING e Fees reet toe ees 48 vii Getting Started Packing Checklist Carefully unpack the projector and check that the following items are included Remot
5. 13 DLP Projector User s Manual 5 You can use the cursor buttons Password AY 4 either on keypad or IR remote control for password entry You can use any combination including the same arrow five times but not less than five Menu Exit Password Press the cursor buttons in any order to set the password Push the Menu button to exit the dialog box s Menu Exit 6 The password confirm menu appears when user presses the power on key in case the Security Lock is enabled Password Enter the password in the order you set it at step 5 In case you forget the uuu password please contact the service center Service center will validate the owner and help reset the password Menu Cancel 14 DLP Projector User s Manual Adjusting the Projector Level Take note of the following when setting up the projector e projector table or stand should be level and sturdy e Position the projector so that it is perpendicular to the screen Ensure the cables are in safe location You could trip over them 1 To raise the level of the projector lift the projector and press the height adjuster button B The height adjuster drops down C 2 To lower the level of the projector press the height adjuster button and push down on the top of the projector 3 To adjust the angle of the picture turn the tilt adjuster D right or left until the desired angle has been achieved
6. Video Audio Installation TI Auto Power Off min English German French Spanish Portuguese Traditional Chinese Simplified Chinese Italian Norwegian Swedish Dutch Russian Black Red Green Blue White Front Rear Ceiling Rear Ceiling Normal High Fill 4 3 16 9 LetterBox Native Advanced Factory Reset 20 DLP Projector User s Manual OSD Sub Menu Overview Video Audio Audio Installation II Advanced Image Advanced Color Manager 99 99 Saturation 0 199 0 199 Installation Advanced Peripheral Test Remote Control Test lt 99 99 0 199 0 199 Q s amp 5 Q 8 8 99 99 Blue 0 199 0 199 Installation II Status Lamp Hours Eco Normal 99 99 0 199 0 199 99 99 0 199 Magenta a 0 199 8 8 99 99 Yellow 0 o ZZ g Ei t White 9 lt B 1 21 DLP Projector User s Manual Image Menu Press the Menu button to open the OSD menu Press the cursor 4 button to move to the Image Menu Press the cursor Y button to move up and down in the Image menu Press lt gt to change values for settings Image Display Mode Brilliant Color Brightness Contrast Sharp
7. og gt So gt o CO 5 lt module 36 Reverse steps 1 to 5 to install the new lamp mod ule While installing align the lamp module with the connector and ensure it is level to avoid damage Note The lamp module must sit securely in place and the lamp connector must be connected prop erly before tightening the Screws 27 DLP Projector User s Manual DLP Projector User s Manual Resetting the Lamp After replacing the lamp you should reset the lamp hour counter to zero Refer to the following E B Image Computer Video Audio Installation 1 Press the Menu button to open the OSD menu Press the cursor lt button to move to the Installation menu Press the cursor button to move down to Advanced Press the cursor Y A button to move down to Lamp Hour Reset Press the cursor or Enter button A message screen appears Press V lt P buttons to reset the lamp hour Press the Menu button to get back to Installation 11 Advanced Menu Exit Lamp Hour Reset Menu Exit 38 Item Adjust Item Adjust p Menu Exit Scroll d E uter 7 Audio 1 Scroll a v puter 7 Audio 1 of DLP Projector User s Manual Cleaning the Projector Cleaning the projector to remove dust and g
8. 43 DLP Projector User s Manual Specifications Input Connectors VGA PC I USB service only Composite video RCAx1 Video zy S Video Mini DIN Audio Mini jack Security Kensington slot Projection Distance vs Projection Size Image Hight Projection Distance Projection Distance and Size Table PR6022 Tele Wide m 1 34 3 58 4 47 8 94 1 54 3 09 3 86 11 58 Distance feet 52 76 140 94 175 98 351 97 60 63 121 65 151 97 455 91 Diagonal inches 30 80 100 200 40 80 100 300 Keystone degree 12 3 12 3 12 3 12 3 14 2 14 2 14 2 14 2 mm 457 1219 1524 1864 610 1219 1524 4572 Image Height inches 17 99 47 99 60 00 73 39 24 02 47 99 60 00 180 00 mm 610 1626 2032 3762 813 1626 2032 6096 Image Width inches 24 02 64 01 80 00 148 11 32 01 64 01 80 00 160 00 64 171 213 427 85 171 213 640 Offset inches 2 52 6 73 8 39 16 81 3 35 6 73 8 39 25 20 44 DLP Projector User s Manual Timing Mode Table The projector can display several resolutions The following table outlines the resolutions that can be displayed by the projector Signal Resolution eee Composite Component RGB NTSC 15 734 60 0 PAL SECAM 15 625 50 0 m 640 x 350 379 85 0 s E 640 400 37 9 85 0 i es O 720 x 400 37 9 85
9. The projec Press Power again tor turns off Caution 1 Be sure to remove the lens cap before starting projector 2 Do not unplug the power cord until the Ready LED stops flashing indicating the projector has cooled down 12 DLP Projector User s Manual Setting an Access Password Security Lock You can use the four arrow buttons to set a password and prevent unauthorized use of the projec tor When enabled the password must be entered after you power on the projector See Navigating the OSD on page 18 and Setting the OSD Language on page 19 for help on using OSD menus Important Keep the password in a safe place Without the password you will not be able to use the projector If you lose the password contact your reseller for information on clearing the password 1 Press the Menu button to open the OSD menu Computer Video Audio Installation Installation Il 2 Press the cursor 4 button to move to the Installation menu Menu Exit Menu Select 4 gt Scrolla w efi q Computer Video Audio Installation Il Menu Exit Menu Select 4 gt Scroll aw 3 Press the cursor Y button to select El Security Lock g Computer Video Audio stallati Installation Il 4 Press the cursor 4 button to enable Security Lock or disable security lock function A password dialog box automatically appears
10. DLP Projector User s Manual Color Manager Press lt Enter gt to enter the Color Manager sub menu Advanced X Color Manager Green Blue Cyan Magenta Yellow White Item Description Red Select to enter the Red Color Manager Press the 4 buttons to adjust the Hue Saturation and Gain Green Select to enter the Green Color Manager Press the 4 buttons to adjust the Hue Saturation and Gain Blue Select to enter the Blue Color Manager Press the 4 buttons to adjust the Hue Saturation and Gain Cvan Select to enter the Cyan Color Manager y Press the 4 buttons to adjust the Hue Saturation and Gain Maidenia Select to enter the Magenta Color Manager 9 Press the 4 buttons to adjust the Hue Saturation and Gain Yellow Select to enter the Yellow Color Manager Press the 4 buttons to adjust the Hue Saturation and Gain White Select to enter the White Color Manager Press the 4 buttons to adjust the Red Green and 24 Computer Menu DLP Projector User s Manual Press the Menu button to open the OSD menu Press the cursor 4 button to move to the Com puter menu Press the cursor A V button to move up and down in the Computer menu Press 4 to change values for settings Computer Horizontal Position Vertical Position Frequency Tracking Auto Imaqe Item Description Horizontal Position Press the cursor 4 button to adjust
11. T TILL IPP I PLANAR E PAA A E E E E CUC MILL E HE HET LI ML A ESSC 1 1 Lu HL Ae T gt TEXAS 47 Regulatory Compliance FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pur suant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used accordance with the instruction manual may cause harmful interference to radio communica tions Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his her own expense Changes or modifications not expressly approved by the parties responsible for compliance could void the user s authority to operate the equipment Canada This class B digital apparatus complies with Canadian ICES 003 Safety Certifications FCC B UL cUL CE class B CB and C Tick EN 55022 Warning This is a Class B product In a domestic environment it may cause radio interference in which case the user may be required to take adequate measures The typical use is in a conference room meet ing room or auditorium 48 Planar Systems Inc Corporate Headquarters 1195 NW Com
12. and using the projector read the regulatory notices in the Regulatory Compliance section on page 48 Symbol Explanations DISPOSAL Do not use household or municipal waste collection services for disposal of electrical and electronic equipment EU countries require the use of separate recycling collection services V Preface Main Features e Lightweight unit easy to pack away and transport e Compatible with all major video standards including NTSC PAL and SECAM e Ahigh brightness rating allows for presentations in daylight or in lit rooms e Supports resolutions up to SXGA at 16 7 million colors to deliver crisp clear images e Flexible setup allows for front rear projections e Line of vision projections remain square with advanced keystone correction for angled projections e Input source automatically detected Register Your Planar Products Today Thank you for choosing Planar To assure you receive all the benefits of your Planar product and services reg ister your Planar product today Visit our website to register your product at http www planar com support product_registration html Cables Replacement Lamps and Accessories To find cables replacement lamps and accessories for your Planar projector LCD monitor touchscreen or other Planar products visit our online store at www PlanarOnline com or find other stores who carry Planar products at http www planar com howtobuy About this manua
13. 0 640 x 480 31 5 60 0 O 640 x 480 379 72 0 n 640 480 37 5 750 E 640 480 43 3 85 0 Z O 800 x 600 352 56 0 800 600 379 60 0 O 800 x 600 48 1 72 0 m O VESA 800 x 600 46 9 75 0 800 x 600 537 85 0 S O 1024 x 768 48 4 60 0 O 1024 x 768 56 5 70 0 1024 768 60 0 75 0 O 1024 x 768 68 7 85 0 m 1440 900 55 6 60 0 O 1280 x 1024 63 98 60 0 O 1280 1024 7998 75 0 1400 1050 65 3 60 0 22 O 45 DLP Projector User s Manual V Sync Composite Signal Resolution Hz S Video Component RGB 640 x 480 35 0 66 68 O 832 x 624 49 725 74 55 1024 768 60 24 75 0 1152 870 68 68 75 06 O 480i 15 734 60 SDTV 576i 15 625 50 O 480p 31 469 60 O EDTV 576p 31 25 50 720 37 5 50 O 720p 45 0 60 HDTV 1080i 33 8 60 O 1080i 28 1 50 O Frequency supported Frequency not supported Displayable level The resolution of the panel is 1024 x 768 Resolution other than native resolution may display with uneven size of text or lines HDTV timing DVD player main source VG828 secondary source 46 DLP Projector User s Manual Projector Dimensions Apesy dusi SAO JeMod 22 22 YVNV Id TILEHZL IN TL
14. EMOTE CONTROL BATTERIES 9 CONNEGTINGINPUT IDEBVICES AE ETEA E RERA ERS 10 STARTING AND SHUTTING DOWN THE 2 000 010102000000000000000000000020000000 00 11 SETTING AN ACCESS PASSWORD SECURITY 2 2 2 2 4 ee Eae rora EE E EEEE E EE REEE EEEE EEN TEE 13 ADJUSTING THE PROJECTOR LEVEL 15 ADJUSTING THE ZOOM FOCUS AND KEYSTONE cccsssssseccceceesesssaecececeesensaaeceeececseseaaececececsessaaeseecescseneaaeaecececeenesaeeeeeees 16 ADIUSTING THE issuu ann q ce dte Ged bop 17 ON SCREEN DISPLAY OSD MENU SETTINGS 18 OSD MENU CONTROLS 6 ete eret y reiecit ecoute 18 NAVIGATING THE OSD isco rte et eed Mate e PP AH eS ee gs 18 SETTING THE OSD EANGUAGE rte rre reor cede 19 OSD MENU OVERVIEW 20 OSD SUB MENU OVERVIEW re repre Pe FU ee e ERE 21 M 22 ie tp ette ptt et oO TSO EE e erre ide ceat ete eU cue emt ipee Kuba 23 Color Manager u a e AR ORE ER RA e ERE Red
15. PLANAR onn sd EI PR6022 DLP Projector USER S MANUAL www planar com Planar Systems Inc Corporate Headquarters 1195 NW Compton Drive Beaverton OR 97006 1992 Planar Customer Support Telephone US 1 866 PLANAR1 866 752 6271 Outside US 503 748 5799 E mail PlanarSupport planar com Online Technical Library http www planar com support 24 7 Technical Support User s Manual Copyright This publication including all photographs illustrations and software is protected under international copy right laws with all rights reserved Neither this manual nor any of the material contained herein may be reproduced without written consent of the author Copyright 2008 Disclaimer The information in this document is subject to change without notice The manufacturer makes no repre sentations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose The manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes Trademark Recognition Kensington is a U S registered trademark of ACCO Brand Corporation with issued registrations and pend ing applications in other countries throughout the world All other product names used in this manual are the properties of their respect
16. RGB cable from a computer Q VGA Connect DVD input YCbCr YPbPr through optional RGB to COMPONENT ADAPTOR Warning As a safety precaution disconnect all power to the projector and connecting devices before making connections 10 DLP Projector User s Manual Starting and Shutting down the Projector 1 Connect the power cord to the projector Connect the other end to a wall outlet The Power Ready LEDs the projector light 2 Turn on the connected devices 3 Ensure the Ready LED displays a solid orange and not a flashing or I ange Then press the Power button to turn on the projector The projector splash screen displays L A N A connected devices de tected See Setting an Access Password www planar com Security Lock on page 13 if security lock is enabled 4 If more than one input device is con Source nected press the Source button and use A Y to scroll among de MS vices Component is supported through the RGB to Component adapter Item Adjust 4J Scroll a v Menu Exit e RGB Analog RGB Component DVD input YCbCr YPbPr or HDTV input YPbPr via HD15 connector e Composite Video Traditional composite video e 5 Super video Y C separated 11 DLP Projector User s Manual 5 When the Power Off Press Power again message appears Power Off press the Power button
17. atus 29 DLP Projector User s Manual Advanced Feature Press the Menu button to open the OSD menu Press lt to move to the Installation II menu Press A V to move to the Advanced menu and then press Enter Press A V to move up and down in the Advanced menu Press lt gt to change values for settings Advanced OSD Menu Setting Peripheral Test Lamp Hour Reset Item Description OSD Menu Set Press Enter to enter the OSD setting menu See page 31 for more ting information on OSD Menu Setting Press Enter to enter the Peripheral Test menu See page 32 for more in Penpneral fest formation on Peripheral Test Lamp Hour Re After replacing the lamp this item should be reset See page 33 for more in set formation on Lamp Hour Reset 30 DLP Projector User s Manual OSD Menu Setting Advanced X OSD Menu Setting Menu Position Translucent Menu Menu Display e De ptio Menu Position Press 4 button to select different OSD location Translucent Menu Press 4 button to select OSD background translucent level Menu Display Press 4 button to select OSD timeout delay 21 DLP Projector User s Manual Peripheral Test Advanced Peripheral Test Remote Control Test USB Test Button Test Color Test Sound Test Item Description Remote Control Test Press lt Enter and follow the on sc
18. e EUR MR e RE Ee ete du ttem e Ee ee 24 COMPUTER UD ees 25 BAISER IDEE TP 26 uu coat ian w aD 27 INSTATEATPIONT MENU er 28 INSTAL TATION MENU cos C 29 Advanced Feattre e te eet t toca ta ES 30 QSD Menu Setting t e ER Rt dee e t ade e p RR 3l Peripheral est eS eR SR e cete a m ica reete e o o eed 32 Lamp Ror Fi6Set u Sa eet e tee Quy eet aha aya a akawa oet eade sedans 33 ROS OT PP 34 34 MAINTENANCE AND SECURITY uu resti fe qu qaa euet eon ana uawan usaq el ev 35 REPLACING THE PROJECTION LAMP 35 Resetting th RE Teo oT 36 CLEANING THE PROJECTOR avete 39 Cleaning 39 Cleaning the Case usi deese d e UI FRE EL re Reel e n ERE RR E NE A cree 39 USING THE KENSINGTON LOCK n Tea Ve ve SERERE 40 TROUBLESHOOTING 41 COMMON PROBLEMS AND SOLUTIONS eaten assesses 41 TIPS FOR FROUBLESHOOTING 41 LED ERROR MESSAGES e eerte CASERO EE E FEE ERE ENSE 42
19. e control with one 3V CR2025 battery Power cord RGB to Component Adapter Optional RGB cable Quick Start Guide CD ROM Carrying case This User s manual Quick Start Guide Contact your dealer immediately if any items are missing appear damaged or if the unit does not work It is recommend that you keep the original packing material should you ever need to return the equipment for warranty service Caution Avoid using the projector in dusty environments DLP Projector User s Manual Views of Projector Parts Front right View D SS gt KES S 7 oS SSNS HS MB SS SENI Q 1 Description See page 1 Ventilation opening To keep the projector lamp cool 2 Height adjuster button Push to release height adjuster 3 Height adjuster Adjusts level of projector 4 Lens Covers lens to protect when not in use 5 IR receiver Receiver for IR signal from remote control 6 6 Lens Remove lens cap before use 7 Focus ring Focuses the projected image 8 Zoom ring Enlarges the projected image 9 2 221 Display OSD but 3 Important Ventilation openings on the projector allow for good air circulation which keeps the projector lamp cool Do not obstruct any of the ventilation openings DLP Projector User s Manual Top view On screen Display OSD buttons and LEDs 1 2 3 4 56 Power
20. e lamp goes off 1 Power surges can cause the lamp to turn off Re plug power cord When the Ready LED is on press the power button 2 Replace the lamp module 3 Putthe old lamp back in the projector and have the projector serviced Remote Control Problems Problem The projector does not respond to the remote control 1 Direct the remote control towards remote sensor on the projector Ensure the path between remote and sensor is not obstructed Turn off any fluorescent lights in the room Check the battery polarity Replace the batteries Turn off other Infrared enabled devices in the vicinity 2 99 Have the remote control serviced Audio Problems Problem There is no sound 1 Adjust the volume on the remote control 2 Adjust the volume of the audio source Check the audio cable connection 1 Test the source audio output with other speakers 2 Have the projector serviced Problem The sound is distorted 1 Check the audio cable connection 2 Test the source audio output with other speakers 3 Have the projector serviced Having the Projector Serviced If you are unable to solve the problem you should have the projector serviced Pack the projector in the original carton Include a description of the problem and a checklist of the steps you took when trying to fix the problem The information may be useful to service personnel For servicing return the projector to the place you purchased it
21. expect Language and Security Lock 28 DLP Projector User s Manual Installation II Menu Press the Menu button to open the OSD menu Press the cursor 4 button to move to the Installa tion Il menu Press the cursor A Y button to move up and down in the Installation menu Press lt gt to change values for settings Installation Il Auto Source Auto Power Off min Auto Power On Fan Speed Lamp Mode Advanced Factory Reset Status Item Description Press the cursor 4 button to enable or disable automatic source detection Range On Auto Source Auto Power Press the cursor 4 button to enable or disable automatic shutdown of lamp min when no signal Press the cursor 4 button to enable or disable automatic power On when Auto Fower On AC power is supplied Press the cursor lt P button to toggle between Normal and High fan speeds Note We recommend selecting high speed in high temperatures high humid Fan Speed ity or high altitude areas Lamp Mode Press the cursor lt P button to select the lamp mode for higher brightness or P lower brightness to save lamp life Ad nced Press lt Enter gt to enter the Advanced menu See Advanced Feature on page 30 Factory Reset Press lt Enter gt to reset all items to factory preset values Status Press lt Enter gt to enter the Status menu See page 34 for more information on St
22. eyes do not look into the lens when the lamp is on gt Donolplace the unit on an unstable surface cart or stand gt Avoid using the system near water in direct sunlight or near a heating device gt Do not place heavy objects such as books or bags on the unit DLP Projector User s Manual Power Safety gt Only use the supplied power cord gt not anything on the power cord Place the power cord where it will not be in the way of foot traffic Remove the batteries from the remote control when storing or not in use for a prolonged period Replacing the Lamp Replacing the lamp can be hazardous if done incorrectly See Heplacing the Projection Lamp on page 35 for clear and safe instructions for this procedure Before replacing the lamp gt Unplug the power cord gt Allow the lamp to cool for about one hour Important Recycle Instructions 89 inside this product contain mercury This product may contain other electronic waste that be hazardous if not disposed of properly Recycle or dispose in accordance with local state or federal Laws For more information contact the Electronic Industries Alliance at WWW EIAE ORG For lamp specific disposal information check WWW LAMPRECYCLE ORG Cleaning the Projector gt Unplug the power cord before cleaning See Cleaning the Projector on page 39 gt Allow the lamp to cool for about one hour Regulatory Warnings Before installing
23. ideo To overcome this issue open the Video Audio menu and adjust the Film Mode feature 26 Audio DLP Projector User s Manual Press Enter to enter the audio submenu Video Audio Audio Item Description Volume Press the lt gt buttons to adjust the audio volume Range 0 8 Mute Press the 4 buttons to turn on or off the speaker 27 DLP Projector User s Manual Installation Menu Press the Menu button to open the OSD menu Press the cursor 4 button to move to the Installa tion menu Press the cursor Y button to move up and down in the Installation menu Press lt gt to change values for settings Language Blank Screen Projection Security Lock Aspect Ratio Keystone Digital Zoom Reset Language Press the cursor 4 button to select a different localization Menu Blank Screen Press the cursor lt P button to select different color to blank the screen Projection Press the cursor 4 button to choose from four projection methods Security Lock Press the cursor lt P button to enable or disable security lock function Aspect Ratio Press the cursor 4 button to adjust the video aspect ratio Keystone Press the cursor 4 button to adjust the display keystone Digital Zoom Press the cursor 4 button to adjust the Digital Zoom menu Range 10 10 Reset Press lt Enter gt to reset all settings to default values
24. ive owners and are ac knowledged Preface Important Safety Information Congratulations on purchasing the Planar DLP projector Important It is strongly recommended that you read this section carefully before using the projector These safety and usage instructions will ensure that you enjoy many years of safe use of the projector Keep this manual for future reference Symbols Used Warning symbols are used on the unit and in this manual to alert you of hazardous situations The following styles are used in this manual to alert you to important information Note Provides additional information on the topic at hand Important Provides additional information that should not be overlooked Caution Alerts you to situations that may damage the unit Warning Alerts you to situations that may damage the unit create a hazardous environment or cause per sonal injury Throughout this manual component parts and items in the OSD menus are denoted in bold font as in this example Push the Menu button on the remote control to open the Main menu General Safety Information gt Do not open the unit case Aside from the projection lamp there are user serviceable parts in the unit For servicing contact qualified service personnel gt Follow all warnings and cautions in this manual and on the unit case gt The projection lamp is extremely bright by design To avoid damage to
25. l This manual is intended for end users and describes how to install and operate the DLP projector Wher ever possible relevant information such as an illustration and its description has been kept on one page This printer friendly format is both for your convenience and to help save paper thereby protecting the environment It is suggested that you only print sections that are relevant to your needs DLP Projector User s Manual Table of Contents GETTING STARTED k 1 PACKING CHEGKLIST Aaa ite oc Qn ad i PERI I ER GREE 1 MIEWS OB PROJECTOR PARTS Ge ated aut de tee tede 2 Frontright VIEW rd RT Ree RSEN RENE RENS apaku qapaq a et een nee 2 Top view On screen Display OSD buttons and LEDS sse nene 3 Hear VIOW s ete ei m sha eme uc 4 DBOIOImVIOW adam GS ace S edt UR d er Lh Sami ta 5 REMOTE CONTROL adea te edat dex UE RR Or e aiu dia aid d ne ee 6 REMOTE CONTROL OPERATING RANGE Gem dux tui Heck ab Saa EO euo ui 8 PROJECTOR AND REMOTE CONTROL 6 seen a asas ee setate anas sess estesa estate a uY 8 Hemolte GOnlrol a t 8 SETUP AND OPERATION 9 INSERTING THE R
26. maximum screw depth of 6 mm 0 23 inch DLP Projector User s Manual Remote Control Parts 1 2 4 5 Power 3 P x 4 5 9 be 7 Auto Source CU Important 1 Avoid using the projector with bright fluorescent lighting turned on Certain high frequency fluores cent lights can disrupt remote control operation 2 Be sure nothing obstructs the path between the remote control and the projector If the path between the remote control and the projector is obstructed you can bounce the signal off certain reflective sur faces such as projector screens 3 The buttons and keys on the projector have the same functions as the corresponding buttons on the remote control This user s manual describes the functions based on the remote control DLP Projector User s Manual Item Label Description See page 1 Up cursor Navigates and changes settings in the OSD 18 2 Enter Changes settings in the OSD 9 Power Turns the projector On or Off 11 4 Right cursor Navigates and changes settings in the OSD 18 5 Volume Increase volume 17 6 Volume Decrease volume 7 Mute Mutes the built in speaker 8 Freeze Freeze unfreezes the on screen picture 9 Source Detects the input device 10 10 Auto Auto adjustment for frequency tracking size position 11 Keystone top Corrects image trapezoid wider top effect 12 Keystone bottom Correct
27. ness Gamma Advanced Reset Display Mode Press the cursor 4 button to set the Display Mode Brilliant Color Press the cursor 4 button to adjust the Brilliant Color value Brightness Press the cursor 4 button to adjust the display brightness Contrast Press the cursor 4 button to adjust the display contrast Sharpness Press the cursor 4 button to adjust the display sharpness level Gamma Press the cursor 4 button to adjust the gamma correction of the display Advaricea Press lt Enter gt to enter the Advanced menu See Advanced Feature on page 23 Reset Press lt Enter gt to reset all settings to default values 22 DLP Projector User s Manual Advanced Feature Press the Menu button to open the OSD menu Press lt to move to the Image menu Press VA to move to the Advanced menu and then press Enter or Press Y A to move up and down in the Advanced menu Advanced Color Space Color Temperature Color Manager Item Description Press the cursor lt P button to adjust the color space L l Range Auto RGB YPbPr YCbCr Color Temperature Press the cursor 4 button to adjust the color temperature P Range 6500 K 10500 K Press lt Enter gt to enter the color manager menu Range Red Color Manager Green Blue Cyan Magenta Yellow White See page 24 for more informa tion on Color Manager 22
28. on to move up and down in the Installation Il menu Select the Installation sub menu and press lt Enter gt to enter the Status sub menu E puter Audio EJ Menu Exit Item Description Active Source Display the activated source Video Informa Displays resolution video information for RGB source and color standard for tion Video source Lamp hour used information is displayed Eco and Normal counters are sepa Lamp Hours rated 34 Maintenance and Securit Replacing the Projection Lamp The projection lamp should be replaced when it burns out It should only be replaced with a certified replacement part which you can order from your local dealer Important a The projection lamp used in this product contains a small amount of mercury b Do not dispose this product with general household waste c Disposal of this product must be carried out in accordance with the regulations of your local authority Warning Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp Failure to do so could result in a severe burn 1 Loosen the two captive screws on the lamp com partment cover A 2 Remove the lamp com partment cover B 25 DLP Projector User s Manual e lt 95 4 g o 25 5 5 c Lift the module handle B 4 s
29. partment cover by sliding the cover in the di rection of the arrow A Pull out the cover B 2 Insert the battery with the positive side facing up 3 Replace the cover Caution 1 Only use a 3V lithium battery CR2025 2 Dispose of used batteries according to local ordinance regulations 3 Remove the battery when not using the projector for prolonged periods DLP Projector User s Manual Connecting Input Devices A PC or notebook computer and video devices can be connected to the projector at the same time Video devices include DVD VCD and VHS players as well as movie camcorders and digital still cameras Check the user manual of the connecting device to confirm it has the appropriate output connector 600900 OG e o ss USB AUDIO S VIDEO VIDEO ACIN Label Description 5 USB Service Only Connect the USB cable from a computer service only AUDIO Connect the audio cable from the computer s audio out connector Connect the audio cable mini jack to RCA x 2 from a video device S VIDEO Connect the S video cable from a video device VIDEO Connect the video cable from a video device Connect the
30. pton Drive Beaverton OR 97006 1992 Planar Customer Support Telephone US 1 866 PLANAR1 866 752 6271 Outside US 503 748 5799 E mail PlanarSupport planar com Online Technical Library http www planar com support 24 7 Technical Support 2008 Planar Systems Inc Planar is a registered trademark of Planar Systems Inc Other brands and names are the property of their respective owners Technical information in this document is subject to change without notice P N 020 0915 00A
31. put device 4 S VIDEO Connect the S VIDEO CABLE from a video device 10 5 VIDEO Connect the VIDEO CABLE from a video device 6 VGA Connect the RGB CABLE from a computer and components 8 Secure to permanent object with Kensington 7 Security Lock Lock ns i 9 40 If your video equipment has both S VIDEO jacks composite video connect to the S VIDEO connector S VIDEO provides a better quality signal DLP Projector User s Manual Bottom view 1 2 z 7 8 N P s j 0 0 000000 1 XS O Item Label Description See page 1 Lamp cover Remove when changing the lamp 35 Adjuster drops down when adjuster button is 2 Height adjustor pushed 15 3 Lens cap hook To fasten the lens cap cover 4 Tilt adjustor Rotate adjuster lever to adjust angle position 15 5 Ceiling support holes your dealer for information mounting the Note When installing ensure that you use only UL Listed ceiling mounts For ceiling installations use approved mounting hardware and M4 screws with a
32. reen prompts to carry out the Remote Control Test Press the Menu button twice to return to the Peripheral Test menu USB Test Press lt Enter gt and follow on screen prompts to carry out the USB Test Press the Menu button to return to the Peripheral Test menu Button Test Press lt Enter gt and follow the on screen prompts to carry out the Button display panel Test Press the Menu button twice to return to the Peripheral Test menu Color Test Press lt Enter gt and follow on screen prompts to carry out the Color Test Press the Menu button to return to the Peripheral Test menu Sound Test Press lt Enter gt and follow on screen prompts to carry out the Sound Test Press the Menu button to return to the Peripheral Test menu 32 DLP Projector User s Manual Lamp Hour Reset LJ 4 Image Computer Video Audio Installation Menu Exit Please refer to Hesetting the Lamp on page 38 to reset the lamp hour counter 33 DLP Projector User s Manual Factory Reset Press the cursor A V button to move up and down in the Installation Il menu Select the Factory Reset sub menu and press lt Enter gt to reset all the menu items to the factory default values expect Language and Security Lock Image E puter Audio l Factory Reset Menu Exit Item Adjust J Scroll 4 Status Press the cursor A V butt
33. rime will help ensure trouble free operation Warning 1 Be sure to turn off and unplug the projector at least 30 minutes before cleaning Failure to do so could result in a severe burn 2 Use only a dampened cloth when cleaning Do not allow water to enter the ventilation openings on the projector 3 If a little water gets into the projector interior while cleaning leave unplugged in a well ventilated room for several hours before using 4 If a lot of water gets into the projector interior when cleaning have the projector serviced Cleaning the Lens You can purchase optic lens cleaner from most camera stores Refer to the following to clean the pro jector lens 1 Applyalittle optic lens cleaner to a clean soft cloth Do not apply the cleaner directly to the lens 2 Lightly wipe the lens in a circular motion Caution 1 Do not use abrasive cleaners or solvents 2 To prevent discoloration or fading avoid getting cleaner on the projector case Cleaning the Case Refer to the following to clean the projector case 1 Wipe off dust with a clean dampened cloth 2 Moisten the cloth with warm water and mild detergent such as used to wash dishes and then wipe the case 3 Rinse all detergent from the cloth and wipe the projector again Caution To prevent discoloration or fading of the case do not use abrasive alcohol based cleaners 39 DLP Projector User s Manual Using
34. s image trapezoid wider bottom effect m 13 Down cursor Navigates and changes settings in the OSD 14 Left cursor Navigates and changes settings in the OSD 18 15 Menu Opens the OSD DLP Projector User s Manual Remote Control Operating Range The remote control uses infrared transmission to control the projector It is not necessary to point the remote directly at the projector Provided you are not holding the remote perpendicular to the sides or the rear of the projector the remote will function well within a radius of about 7 meters 23 feet and 15 degrees above or below the projector level If the projector does not respond to the remote control move a little closer Projector and Remote Control Buttons The projector can be operated using the remote control or the buttons on the top of the projector All operations can be carried out with the remote control however the buttons on the projector are lim ited in use The following illustration shows the corresponding buttons on the remote control and on the projector Remote Control 4 8 1 10 9 Power OveTemp Ready c c b Power Menu Ea Jew 4 Source Auto 3 6 7 2 5 4 Some buttons on the projector have multiple functions For example item 3 6 7 on the projector func tions as the keystone button and as the down cursor key Setup Operation Inserting the Remote Control Batteries 1 Remove the battery com
35. tebook Tips for Troubleshooting In each problem specific section try the steps in the order suggested This may help you to solve the problem more quickly Try to pin point the problem and thus avoid replacing non defective parts For example if you replace batteries and the problem remains put the original batteries back and go to the next step Keep a record of the steps you take when troubleshooting The information may be useful when call ing for technical support or for passing on to service personnel 41 DLP Projector User s Manual LED Error Messages Over Temp LED Error Code Messages Power LED Blink Ready LED Blink Over temperature Thermal break status error Lamp error Fan1 error Fan2 error Fan3 error Lamp door open DMD error Color wheel error O O o oc1 4o c In the event of an error please disconnect the AC power cord and for 1 minute before starting the projector If the Power or Ready LEDs are still blinking or the Over Temp LED is lit contact your service center Image Problems Problem No image appears on the screen 1 Verify the settings on your notebook or desktop PC 2 Turn off all equipment and power up again in the correct order Problem The image is blurred 3 Adjust the Focus on the projector 4 Press the Auto button on the remote control or projector 5 Ensure
36. the Kensington Lock If you are concerned about security attach the projector to a permanent object with the Kensington slot and a security cable OBleeose SVIDEO Note Contact your vendor for details on purchasing a suitable Kensington security cable The security lock corresponds to Kensington s MicroSaver Security System If you have any com ment contact Kensington 2853 Campus Drive San Mateo CA 94403 U S A Tel 800 535 4242 http www Kensington com 40 Troubleshootino Common problems and solutions These guidelines provide tips to deal with problems you may encounter while using the projector If the problem remains unsolved contact your dealer for assistance Often after time spent troubleshooting the problem is traced to something as simple as a loose con nection Check the following before proceeding to the problem specific solutions e Use some other electrical device to confirm that the electrical outlet is working e Ensure the projector is turned on e Ensure all connections are securely attached e Ensure the attached device is turned on e Ensure a connected PC is not in suspending mode e Ensure a connected notebook computer is configured for an external display This is usually done by pressing an Fn key combination on the no
37. the display position to left or right Vertical Position Press the cursor 4 button to adjust the display position to up or down Frequency Press the cursor 4 button to adjust the A D sampling clock Tracking Press the cursor 4 button to adjust the A D sampling dot Auto Image Press lt Enter gt to automatically adjustment for phase tracking size and position 25 DLP Projector User s Manual Video Audio Menu Press the Menu button to open the OSD menu Press the cursor 4 button to move to the Video Audio menu Press the cursor A V button to move up and down in the Video Audio menu Press lt to change values for settings Video Audio Video AGC Video Saturation Video Tint Film Mode Video Overscan Audio Reset Item Description Video AGC Press the lt gt buttons to enable or disable the Automatic Gain Control for video source Video Saturation Press the 4 buttons to adjust the video saturation Video Tint Press the 4 buttons to adjust the video tint hue Film Mode Press the lt P buttons to select a different film mode Video Overscan Press the lt buttons to enable or disable video over scan Audio Press lt Enter gt to enter the Audio menu See Audio on page 27 Reset Press lt Enter gt to reset all settings to default values Note Video jagging may occur when playing interlace v
38. the projector to screen distance is within the 10 meter 33 feet specified range 6 Check that the projector lens is clean Problem The image is wider at the top or bottom trapezoid effect 1 Position the projector so it is as perpendicular to the screen as possible 2 Use the Keystone button on the remote control or projector to correct the problem Problem The image is reversed Check the Projection setting on the Installation menu of the OSD Problem The image is streaked 1 Set the Frequency and Tracking settings on the Computer menu of the OSD to the default settings 2 To ensure the problem is not caused by a connected PC s video card connect to another computer Problem The image is flat with no contrast Adjust the Contrast setting on the Image menu of the OSD Problem The color of the projected image does not match the source image Adjust the Color Temperature and Gamma settings on the Image menu of the OSD 42 DLP Projector User s Manual Lamp Problems Problem There is no light from the projector 1 Check that the power cable is securely connected Ensure the power source is good by testing with another electrical device Restart the projector in the correct order and check that the Power LED is green If you have replaced the lamp recently try resetting the lamp connections Replace the lamp module 6 Putthe old lamp back the projector and have the projector serviced Problem Th
Download Pdf Manuals
Related Search