Baumatic B724SS-A
Contents
1. Instruction manual User Manual for your Baumatic B724SS A 60 cm Built under electric double ar m x m d ika 4ik naik os 2 D x 292395 P UP EN Ra t wW we SS nn M esp Baumatic You will be mine NOTE This User Instruction Manual contains important information including safety amp installation points which will enable you to get the most out of your appliance Please keep it in a safe place so that it is easily available for future reference for you or any person not familiar with the operation of the appliance DD 23 05 08 Contents Environmental note Important safety information Specifications Product and aperture dimensions Product specifications Standard accessories Optional extras Electrical details Control panel Oven programmer timer display Setting and using the oven programmer timer Setting the time of day and selecting manual operation mode Before first use Setting the minute minder function main and secondary oven Setting the duration function Setting the end cook function Setting the start and end time function Cancelling an automatic cooking function Adjusting the audible signal Selecting a cooking function and temperature Selecting a main oven function and temperature Main oven functions Selecting an oven function and temperature secondary oven Secondary oven functions Grill thermostat contr2. Setting and using the oven programmer timer Setting the time of day and selecting manual operation mode After your appliance is connected to your mains supply for the first time the numbers on the timer display will flash 00 00 Before you can select a cooking function or set a temperature you must put the appliance into manual operation mode and set the time of day o To select manual operation mode press the duration and cooking end time buttons simultaneously o Use the plus and minus buttons to adjust the time that appears in the timer display o When the time shown in the timer display is correct release the plus and minus buttons After 5 seconds the Auto function symbol 9 will disappear from the timer display and the manual operation symbol 11 will appear instead Before first use o To remove any residue from the oven cavities that may have been left from the manufacturing process you should select the fan oven function for the main oven and the conventional oven function for the secondary oven Separately set each oven to its maximum temperature setting o Itis perfectly normal for a smell to be produced during this process o You should make sure that any windows in the room are left open during this process o Itis advisable for you not to remain in the room whilst the burning off process is taking place o You should leave each oven on maximum setting for 30 40 minutes o IMPORTANT You should n
3. you can generally reduce the cooking time and temperature by 10 from the information given for conventional oven cooking 19 Make sure that frozen foods are thoroughly thawed before cooking unless the instructions on the food packaging advise that you can cook from frozen Before cooking check that any accessories that are not required are removed from the oven Place cooking trays in the centre of the oven and leave gaps between the trays to allow air to circulate Try to open the door as little as possible to view the dishes The oven light will remain on during cooking Warnings O Keep the oven door closed when using any of the grill functions Do not use aluminium foil to cover the grill pan or heat items wrapped in aluminium foil under the grill The high reflectivity of the foil could potentially damage the grill element You should also never line the base of your oven with aluminium foil During cooking never place pans or cookware directly onto the bottom of your oven They should always be placed on the shelves provided The grill heating element and other internal components of the oven become extremely hot during operation avoid touching them inadvertently when handling the food which you are grilling I mportant Be careful when opening the door to avoid contact with hot parts of the oven and steam The drip tray handle should only be used to reposition the drip tray and NOT for removing i
4. Grindzuigerstraat 22 1333 MS ALMERE The Netherlands 3136 549 1555 www baumatic nl 22 33 34 35 Baumatic www baumatiece com
5. dish and use the drip tray where appropriate o Outer parts of the oven should only be cleaned with warm soapy water using either a sponge or soft cloth No abrasive cleaners should be used o If you use any form of oven cleaner on your appliance then you must check with the manufacturer of the cleaner that it is suitable for use on your appliance o Any damage that is caused to the appliance by a cleaning product will not be fixed by Baumatic free of charge even if the appliance is within the guarantee period 21 Replacing the oven bulb main and secondary oven IMPORTANT The oven must be disconnected from your mains supply before you attempt to either remove or replace the oven bulb o Remove all oven shelves the drip tray and the side rack that is on the same side as the oven light o Using a screwdriver remove the lamp cover 1 o Unscrew the bulb 2 clockwise and remove it from its holder o Replace the bulb with a 25 W 300 C screw type pigmy o Do not use any other type of bulb o Place the lamp cover back into position There is a curve on one side of the cover this should be on the right hand side as the cover goes back into place 22 Removing the oven door for cleaning To facilitate the cleaning of the inside of the oven and the outer frame of the oven the door can be removed as follows o The hinges A have two movable bolts on them B o If you raise both of the mov
6. fittings or cables to come into contact with areas on the appliance that get hot Do not use the appliance to heat the room it is located in or to dry clothing Do not install the appliance next to curtains or soft furnishings Do not attempt to lift or move cooking appliances by using the oven door or handle as this may cause damage to the appliance or result in injury to the person lifting the appliance Cleaning O Cleaning of the oven should be carried out on a regular basis Great care should be taken whilst using this appliance and when following the cleaning procedure IMPORTANT The appliance must be disconnected from the mains before following the cleaning procedure Installation O This appliance must be correctly installed by a suitably qualified person strictly in accordance with the manufacturer s instructions Baumatic Ltd declines any responsibility for injury or damage to person or property as a result of improper use or installation of this appliance Heat steam and moisture will be created during use of the appliance take care to avoid injury and ensure that the room is adequately ventilated If the appliance is going to be used for prolonged periods of time then additional ventilation may be required Please consult with your qualified installer if you are in any doubt about the amount of ventilation that you will require Declaration of conformity O O In the parts destined to com
7. the housing unit BACK EDGE OF SUPPORT 50 80 mm SHELF WHEN APPLICABLE IMPORTANT The ventilation requirements shown in the above drawing MUST be followed otherwise the oven may not operate correctly 29 My appliance isn t working correctly o The oven isn t coming on Check that the oven is in manual operation mode Check that you have selected a cooking function and a cooking temperature o There appears to be no power to the oven and grill Check that the appliance has been connected to the electrical mains supply correctly Check that the mains fuses are in working order Recheck that the terminal screws are all fully tightened between the links Check that the operating instructions for setting the time of day and putting the appliance into manual operation mode have been followed o The grill function works but the main oven does not Check that you have selected the correct cooking function o The grill and top oven element is not working or cuts out for long periods of time during use Allow the oven to cool for approximately 2 hours Once cool check whether the appliance is again working properly o My food is not cooking properly Ensure that you are selecting the correct temperature and the correct cooking function for the food that you are cooking It may be appropriate to adjust your cooking temperature by plus or minus 10 C to achieve the best cooking
8. able bolts B then the hinges A are released from the oven housing o You should grip the sides of the door at the centre and then incline it slightly towards the oven cavity and then by pulling it gently away from the oven cavity o IMPORTANT You should make sure that the door is supported at all times and that you place the door on some padded material whilst cleaning it o The oven door and door glass should only be cleaned using a damp cloth and a small amount of detergent The cloth MUST NOT have come into contact with any form of cleaning product or chemical previously o To refit the door you should slide the hinges back into their slots and open the door fully o IMPORTANT The movable bolts B must be closed back into their original positions before closing the door o Take care not to dislodge the hinge locking system when removing the door as the hinge mechanism has a strong spring o Do not immerse the door in water at any time 23 INSTALLATION Oo Oo The installation must be carried out by a suitably gualified person in accordance with the current version of the following UK Regulations and Safety Standards or their European Norm Replacements Building Regulations issued by the Department of the Environment Building Standards issued by the Scottish Development Department IEE Wiring Regulations Electricity At Work Regulations Before connecting the appliance make sure that t
9. b clockwise it will set the power level of the grill in the secondary oven Number one is the lowest heat level and number eleven is the highest The grill operating light will come on to show that the grill is in use Oven operating lights main and secondary oven This light will come on to indicate that the oven s heating elements are in operation The light will turn off when the temperature set has been reached It will cycle on and off throughout the cooking time You should not place food inside the cavity until the correct cooking temperature has been reached Cooking guidelines O Please refer to the information given on food packaging for guidance on cooking temperatures and times Once familiar with the performance of your appliance temperatures and times can be varied to suit personal preference If you are using the fan oven function then you should follow the information given on the food packaging for this particular mode of cooking You should pre heat the oven and not place food inside of it until the oven operating light has gone off You can choose not to pre heat when using the fan oven mode however you should extend the cooking time given on the food packaging by at least ten minutes IMPORTANT You should pre heat the oven if you are baking regardless of whether you are using the main or secondary oven If there is no guidance given on the food packaging specifically for cooking in fan oven mode
10. c oven and grill 5 functions Capacity 36 litres O 0O 0O 0 0 0 0 Main oven fan oven only 2 functions o Capacity 53 litres O O Standard accessories Removable side racks 2 x Safety shelves 2 x Enamelled drip trays with handle 2 x Trivets Os O O O Optional extras o BPS1 Pizza stone o SCL 2KIT Stay clean liners kit main oven only Electrical details Rated Voltage 230 Vac 50 Hz Supply Connection 20 A double pole switched fused outlet with 3mm contact gap Max Rated Inputs 4 12 kW Mains Supply Lead 3 x 2 5mm Oven Light Bulb 25 W 300 C screw type pigmy For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice The rating plate for your oven can be located by opening the oven door and looking on the right hand side of the oven chassis Model Number Serial Number Date of Purchase Control Panel Timer control buttons Oven programmer timer Main oven operating light Main oven control knob Grill operating light Grill thermostat control knob Secondary oven operating light Secondary oven control knob osnsoaoupwmnmr Oven programmer timer display 9 Auto function symbol 10 Minute minder symbol 11 Manual operation symbol Duration button Cooking end time button Ea Timer minus button Timer plus button 10
11. ch off at using the plus and minus buttons The Auto function symbol will appear on the timer display o The oven will calculate what time it needs to switch on at so that your food will cook for the length of time that you have selected When it does the manual operation symbol will appear on the timer display and the oven will switch on o When the time of day reaches the end of cooking time that you set the oven will switch off and an alarm will sound The manual operation symbol will disappear and Auto function symbol will flash o To silence the alarm and return the oven to manual operation mode once the start and end time function has been used You should press the duration and cooking end time buttons simultaneously The Auto function symbol will disappear from the timer display o Important The oven will continue to heat once you have returned it to manual operation mode If you have finished cooking then you should switch off the oven by turning the main oven control knob to the off position 15 Cancelling an automatic cooking function If an automatic cooking function has been set and you wish to use the oven in manual operation mode you will need to cancel the automatic cooking function o To select manual operation mode press the duration and cooking end time buttons simultaneously o The Auto function symbol will disappear from the timer display and the manual operation symbol will appear instead Adjusting
12. e into contact with foodstuffs this appliance is in accordance with the requirements of the EC directive 89 109 transposed in the Italian Legislative Decree No 108 of 25 01 92 CE Appliance conforming to the European directives 89 336 EEC 93 68 EEC 73 23 EEC and subsequent revisions and RoHS directive 2002 95 CE The manufacturer declares that the oven is built using certified materials and requires the appliance to be installed in accordance with the standards currently in force This appliance must be used by a trained person for domestic purposes only The ROHS directive stands for the restriction of the use of certain hazardous substances in electrical and electronic equipment This directive bans the placing on the EU market of new electrical and electronic equipment containing more than the agreed levels of lead cadmium mercury hexavalent chromium polybrominated biphenyl PBB and polybrominated diphenyl ether PBDE flame retardants Specifications Product Dimensions Aperture Dimensions Height 715 mm 717 mm Width 595 mm 562 mm Depth 547 mm 560 mm Cooling fan o Tangential cooling fans are fitted inside of this appliance to make the internal temperature of the oven stable and the external surface temperature lower Product specifications Energy efficiency class A LED full programmer 2 Cooling fans Thermostatically controlled grills Double glazed removable doors Top oven stati
13. f 50 230 C Turn the control knob clockwise 17 Selecting an oven function and temperature secondary oven If you turn the control knob clockwise it will firstly turn on the oven light If you continue to turn the knob clockwise then you can select a temperature of between 50 230 C The oven will function as a conventional oven with the top and bottom elements being utilised Secondary oven functions To use one of the other functions you should turn the dial past the 230 C and select the following functions Ea II D E OVEN LI GHT Separate light control which allows the light to be switched on even when the oven not cooking LOWER ELEMENT ONLY This method of cooking uses the lower element to direct heat upwards to the food For slow cooking recipes or for warming up meals UPPER ELEMENT ONLY This method of cooking uses the outer part of the top element to direct gentle heat downwards onto the food For gentle cooking browning or keeping cooked dishes warm FULL GRILL This method of cooking utilises the inner and outer parts of the top element which directs heat downwards onto the food This function is suitable for grilling medium or large portions of sausages bacon steaks fish etc The grill thermostat control knob will control how fierce a heat is produced by the grill element Turn the control knob clockwise 18 Grill thermostat control knob If you turn this control kno
14. he oven to stop cooking at let go of the timer plus and minus buttons The countdown will start immediately and the Auto function symbol and the manual operation symbol will appear on the timer display o When the time of day reaches the end of the cooking time that you have set the oven will switch off and an alarm will sound The manual operation symbol will disappear and the Auto function symbol will flash o To silence the alarm and return the oven to manual operation mode you should press the duration and cooking end time buttons simultaneously The Auto function symbol will disappear from the timer display o Important The oven will continue to heat once you have returned it to manual operation mode If you have finished cooking then you should switch off the oven by turning the main oven control knob to the off position 14 Setting the start and end time function main oven only This function will allow you to set a time in the future that the oven switches on at and a time that the oven will switch off at o Use the main oven control knob 4 to select the fan oven and the temperature that you want to cook at o Press the duration button and the display will show a value of 00 00 Set the period of time that you wish to cook for by using the plus and minus buttons o Immediately press the cooking end time button and the timer display will show the value 00 00 again Set the time of day that you want the oven to swit
15. he supply voltage marked on the Rating Plate corresponds with your mains supply voltage WARNING THIS APPLIANCE MUST BE EARTHED O MAINS POWER SUPPLY This appliance should be wired into a 20 A double pole switched fused spur outlet having 3 mm contact separation and placed in an easily accessible position adjacent to the appliance The spur outlet must still be accessible even when your oven is located in its housing LIVE Ze BROWN EARTH r YELLOW GREEN POWER CORD N a BLUE a NEUTRAL To connect the oven power cord loosen and remove the cover on the terminal block in order to gain access to the contacts inside Make the connection securing the cord in place with the cable clamp provided and then immediately close the terminal block cover again IMPORTANT Please refer to the terminal block information on the next page If you have to change the oven power cord the earthing yellow green conductor must always be 10 mm longer than the line conductors Care must be taken to ensure that the temperature of the mains supply cable does not exceed 50 C If the mains supply cable is damaged then it must be replaced by an appropriate replacement which can be obtained from the Baumatic Spares Department 24 Connecting the mains supply cable O The mains terminal block is located on the rear of the oven and the terminals are accessible by removing the terminal block cover by
16. neer is concerned that damage will be caused to the appliance or your kitchen then he will not complete a repair This includes situations where appliances have been tiled in sealed in with sealant have wooden obstructions placed in front of the appliance like plinths Or any installation other than the one specified by Baumatic Ltd has been completed Please refer to the conditions of guarantee that appear on the warranty card that you receive with the appliance 31 f aumatic You will be mine United Kingdom Baumatic Ltd Baumatic Buildings 6 Bennet Road Reading Berkshire RG2 00X United Kingdom Sales Telephone 0118 933 6900 Sales Fax 0118 931 0035 Service Telephone 0118 933 6911 Service Fax 0118 986 9124 Spares Telephone 01235 437244 Technical Advice Telephone 0118 933 6933 E mail sales baumatic co uk technical baumatic co uk Website www baumatic co uk Republic of Ireland 01 6266 798 Czech Republic Baumatic CR spol s r o Amperova 495 46215 Librec Czech Republic 420 800 185 263 www baumatic cz Slovak Republic Baumatic Slovakia s r o Skultetyho 1 831 04 Bratislava 3 Slovakia 421 255 640 618 Germany Baumatic Gmbh J anderstrasse 9 Mannheim 68199 Germany 4962 112 9190 www baumatic de Italy Baumatic Italia S R L Via Caltana 129 Campodarsego Padova 35011 Italy 3904 9920 2297 www baumatic it Holland Baumatic Benelux B V
17. ol knob Oven operating lights main and secondary oven Cooking guidelines Warnings Cleaning and maintenance Replacing the oven bulb main and secondary oven Removing the oven door for cleaning Installation Electrical connection Connecting the mains supply cable Installing the oven into the kitchen cabinet Positioning the appliance Installation between two separate cabinet units Installation between two side panels and one cabinet unit Ventilation requirements My appliance isn t working correctly Contact details ul gt N I H O O O 00 m o oo Environmental note This appliance is marked according to the European directive 2002 96 EC on Waste electrical and Electronic Equipment WEEE By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The symbol u on the product or on the documents accompanying the product indicates that this appliance may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal For more detailed information about treatment recovery and recycling of this product please contact your local cit
18. on function to countdown for by using the plus and minus buttons o Once the display has got to the desired countdown time let go of the plus and minus buttons The countdown will start immediately and the Auto function symbol and the manual operation symbol will appear on the timer display o An alarm will sound when the countdown time has elapsed and the oven will switch off The Auto function symbol will flash o To silence the alarm and return the oven to manual operation mode you should press the duration and cooking end time buttons simultaneously The Auto function symbol will disappear from the timer display o Important The oven will continue to heat once you have returned it to manual operation mode If you have finished cooking then you should switch off the oven by turning the main oven control knob to the off position 13 Setting the end cook function main oven only This function is similar to the duration function however instead of selecting a period of time that you wish the oven to switch off after You select the time of day that you wish the oven to switch off at o Use the main oven control knob 4 to select the fan oven and the temperature that you want to cook at o Press the cooking end time button and the display will show a value of 00 00 Set the time of day that you wish the oven to stop cooking at by using the plus and minus buttons o Once the display has got to the time of day that you want t
19. or this appliance o The use of this appliance for any other purpose or in any other environment without the express agreement of Baumatic Ltd will invalidate any warranty or liability claim o Your new appliance is guaranteed against electrical or mechanical defects subject to certain exclusions that are noted in Baumatic s Conditions Of Guarantee The foregoing does not affect your statutory rights o Repairs may only be carried out by Baumatic Service Engineers or their authorised service agent Warning and safety instructions O This appliance complies with all current European safety legislation Baumatic do wish to emphasise that this compliance does not remove the fact that the appliance surfaces will become hot during use and retain heat after operation Child Safety O Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time If it is necessary for younger family members to be in the kitchen please ensure that they are kept under close supervision at all times General Safety Do not place heavy objects on the oven door or lean on the oven door when it is open as this can cause damage to the oven door hinges Do not leave heated oil or fat unattended as this is a fire risk Do not place pans or baking trays directly on the base of the oven cavity or line it with aluminium foil Do not allow electrical
20. ot burn off both ovens simultaneously 11 Setting the minute minder function main and secondary oven You are able to set the minute minder at any time regardless of whether an oven function has been selected You can seta period of time using the minute minder function and an alarm will sound when this period of time has elapsed o Press the minute minder button and then use the plus and minus buttons to set the length of time that you require o After releasing the plus and minus buttons the minute minder symbol will appear on the display o An alarm will sound when the countdown time has elapsed The alarm can be silenced by pressing the cooking end time button o Important If the oven is on then it will continue to heat even if you silence the audible alarm If you have finished cooking then you should turn off the oven by turning the oven function selector knob to the off position 12 Setting the duration function main oven only This function will allow you to set a countdown time similar to the minute minder function However the oven will no longer continue to heat once the countdown period has elapsed o Use the main oven control knob 4 to select the fan oven and the temperature that you want to cook at o Itis then possible to set the duration of the cooking time that you require o Press the duration button and the display will show a value of 00 00 Set the period of time that you wish the durati
21. our kitchen units are on legs then you must fit full length side panels to the side of the units that the support brackets will screw into before commencing the installation process 26 Installation between two separate cabinet units o Measure a distance of 717 mm from the underside of the work top and mark the position of the lower support brackets o Fix the lower support brackets in this position to the side of the cabinet units They need to be positioned 40 mm back from the front edge of the cabinet units o Mark the position of the side support brackets ensuring that they are also positioned 40 mm back from the front edge of the cabinet units Fix the side support brackets into position o Gently slide the oven back onto the lower support brackets and fix the oven to the front frame of the cabinets by using the four screws provided 27 Installation between two side panels and one cabinet unit o Measure a distance of 717 mm from the underside of the work top and mark the position of the lower support brackets o Fix the lower support brackets in this position to the side panels of the cabinet unit They need to be positioned 40 mm back from the front edge of the side panels o Gently slide the oven back onto the lower support brackets and fix the oven to the front frame of the cabinet by using the four screws provided 28 Ventilation requirements NOTE Always remove the rear panel of
22. removing the cover screw The cable connections must be in accordance with the diagram located on the rear of the oven The brass links must be positioned as marked in the appropriate diagram and once established ALL terminal screws must be tightened down firmly If when the oven is first switched on it does not work correctly you should recheck that the terminal screws are all fully tightened between the links This should be done before contacting the Baumatic Service Department IMPORTANT The appliance must NOT be connected to the mains supply by means of a 13A plug and socket The cable can be looped if necessary but make sure that is not kinked or trapped when the oven is in position Care must be taken to avoid the cable being in contact with hot parts of the appliance L Terminal 1 2 amp 3 are LIVE and linked together N Terminal 4 amp 5 are NEUTRAL and linked together E Terminal 6 is EARTH 25 Installing the oven into the kitchen cabinet Positioning the appliance O Ensure that the aperture that you will be fitting the oven into is of the size given in the above diagram The oven must be fitted into an oven housing with the ventilation cut outs shown in the Ventilation requirements section on page 30 Ensure that the rear panel of the furniture housing unit has been removed The side panels of the kitchen unit s must be full length and go all the way down to the floor If y
23. results o My food is not cooking evenly Check that the oven has been installed correctly and is level Check that the correct temperatures and shelf positions are being used 30 o The oven light is not working Refer to page 23 and follow the Replacing the oven bulb section o I am getting condensation in my oven Steam and condensation is a natural by product of cooking any food with high water content such as frozen food chicken etc You may get condensation in the oven cavity and forming between the oven door glasses This is not necessarily a sign that the oven is not working correctly Do not leave food in the oven to cool after it has been cooked and the oven has been switched off Use a covered container where practical when cooking to reduce the amount of condensation that forms IMPORTANT If your appliance appears not to be operating correctly then you should disconnect it from your mains supply and then contact the Baumatic Service Department on telephone number 0118 933 6911 DO NOT ATTEMPT TO REPAIR THE APPLI ANCE YOURSELF Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault then you may be liable for the cost of the call out charge The appliance must be accessible for the engineer to perform any necessary repair If your appliance is installed in such a way that an engi
24. t from the oven cavity When removing the drip tray you should ALWAYS use an oven glove The drip tray handle should not be left in position when the appliance is switched on Warning Accessible parts may become hot during use Young children should be kept well away from the oven when it is in use 20 Cleaning and maintenance Cleaning operations must only be carried out when the oven is cool The appliance should be disconnected from your mains supply before commencing any cleaning process o The oven should be thoroughly cleaned before it is operated for the first time and after each use This will avoid residual food stuffs becoming baked on the oven cavity After residues have been baked on several times they are far more difficult to remove o Never clean the oven surfaces by steam cleaning o The oven cavity should only be cleaned with warm soapy water using either a sponge or soft cloth No abrasive cleaners should be used o Any stains that may appear on the bottom of the oven will have originated from food splashes or spilt food these splashes occur during the cooking process These could possibly be a result of the food being cooked at an excessively high temperature or being placed in cookware that is too small o You should make sure that the cooking temperature that is selected is appropriate for the food that you are cooking You should also ensure that the food is placed in an adequately sized
25. the audible signal There are 3 levels of audible signal available to adjust it you should do the following o When the time of day is shown on the timer display press the minus button for approximately 2 seconds You will then hear the current level of audible signal o Repeat this process until the audible signal reaches the level that you require and then release the minus button 16 Selecting a cooking function and temperature IMPORTANT Before attempting to select an oven function for the first time you must set the time of day and select manual operation mode see page 12 Selecting a main oven function and temperature If you turn the control knob clockwise it will firstly turn on the oven light If you continue to turn the knob clockwise then you can select a temperature of between 50 230 C The oven will function as a fan oven with the circular element and fan being utilised Main oven functions x OVEN LIGHT Separate light control which allows the light to be switched on even when the oven is not cooking EA FAN OVEN This method of cooking uses the circular element while the heat is distributed by the fan This results in a faster and more economical cooking process The fan oven allows food to be cooked simultaneously on different shelves preventing the transmission of smells and tastes from one dish onto another It is possible to regulate the temperature within a range o
26. y office your household waste disposal service or the shop where you purchased the product o The packaging materials that Baumatic uses are environmentally friendly and can be recycled o Please discard all packaging material with due regard for the environment IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic Please make sure that you read this instruction booklet before attempting to install or use the appliance If you are unsure of any of the information contained in this booklet please contact the Baumatic Technical Department General I nformation o This appliance is designed for domestic household use and can be built into a standard kitchen cabinet or housing unit o IMPORTANT The adjacent furniture or housing and all materials used in the installation must be able to withstand a minimum temperature of 85 C above the ambient temperature of the room it is located in whilst in use o Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage or discolouration at temperatures below the guidelines given above o Any damage caused by the appliance being installed in contravention of this temperature limit or by placing adjacent cabinet materials closer than 4mm to the appliance will be the liability of the owner o For use in leisure accommodation vehicles please refer to the appropriate information given in the installation instructions f
Download Pdf Manuals
Related Search