Home

Acronis Disk Director 11 Home

1. Make a previously hidden volume again visible to the operating system Access data and make changes to files stored on a hidden OEM volume To unhide a volume 1 Right click the hidden volume you need to unhide and then click Unhide volume The program automatically assigns the first vacant drive letter to this volume 2 Click OK to add the pending volume unhiding operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 25 Specifying i node density This operation applies to volumes whose file systems are Ext2 or Ext3 The i node is the main data structure for Linux Ext2 Ext3 All of a files information with the exception of its actual name and data is stored in the i node Each file has its own i node Each i node contains a file description including number file type size data block pointers etc Space for i nodes is allocated when you install the operating system or when a new file system is created The maximum number of i nodes and hence the maximum number of files is set at file system creation Running out of i nodes prohibits the creation of additional files and directories on the volume even if there is sufficient disk space I nodes themselves consume disk space so specifying the i node density
2. 6 Disk operations This section describes all the operations that you can perform with disks using Acronis Disk Director Acronis Disk Director must obtain exclusive access to the target disk volume This means no other disk management utilities such as the Windows Disk Management utility can access it at that time If you receive a message stating that the disk volume cannot be blocked close the disk management applications that use this disk volume and start again If you cannot determine which applications use the disk volume close them all In this section Disk initialization oooooconnnoccccnononnnonanonnnonanonnnonanonononanonnnocanonnnccanonnncnanos 41 Basic disk cloning cccccononoononcnnnnnnnnoooononcnncnnnnnonononncnncnnnnnnnononnnnnnananonos 41 Disk conversion MBR to GDT uu keke kek keke kk kk ke A KAKA A KA 43 Disk Conversion GPT to MBR Eu kk kek ke kek ener A KA 44 Disk conversion basic to dynamic nnne 44 Disk conversion dynamic to basic esee nnne 45 Changing a disk status online to offline ooococnnincccnnnonacanononananonanonos 46 Changing a disk status offline to online 46 Importing foreign disks M nnne nnne 47 Removing a missing disk sese 47 Cleaning UPA disk codes kilsa sea cegeessdecevasnedegesdtc caeesaaddeyevsadescsvsitceuaviadee 48 6 1 Disk initialization If you add one or more new disks to your ma
3. To convert a basic MBR disk to basic GPT 1 Right click the basic MBR disk you want to convert to GPT and then click Convert to GPT An information window will pop up stating that you are about to convert MBR to GPT 2 Click OK to add the pending MBR to GPT disk conversion operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them Note A GPT partitioned disk reserves the space at the end of the partitioned area necessary for the backup area which stores copies of the GPT header and the partition table If the disk is full and the volume size cannot be automatically decreased the conversion of the MBR disk to GPT will fail If you plan to install an operating system that does not support GPT disks the reverse conversion of the disk to MBR is also possible through the same menu items The name of the operation will be listed as Convert to MBR Dynamic disk conversion MBR to GPT The program does not support direct MBR to GPT conversion for dynamic disks However you can perform the following conversions to reach the goal using the program 1 MBR disk conversion dynamic to basic using the Convert to basic operation 2 Basic disk conversion MBR to GPT using the Convert to GPT operation 3 GPT disk conversion
4. FAT32 boot sector FAT32 FS info sector NTFS boot sector FAT folder The hexadecimal view mode is the main and the most universal Other modes that represent some kind of patterns for viewing data let you work with decoded values of bytes or groups of bytes You will be able to see the stages of disk data storage formation while the standard disk volume is being created and formatted and while files and folders are being created Additionally in the View menu you can hide or show the status bar and toolbar 8 2 5 Search The Search menu lets you search a disk for a line and to go to a disk sector according to its absolute offset A search line can be set both as char and as numeric hexadecimal values During a search you can ignore letter case as well as search for a given line at a given offset inside the sector The disk data is interpreted according to the encoding selected If you selected a search mode without a matching case letter both the case and elements above the characters will be ignored After the search process is finished the current position will be moved to where a line was found or will remain the same if no lines were found You can search for the next line by pressing the F3 key You can go to the necessary sector according to its absolute offset by selecting the Go to menu item or by pressing the Alt P key combination The transition is performed by entering an absolute sector offset or by ent
5. Adding a mirror to a basic or simple volume means converting that volume to a mirrored volume which involves copying the volume s data to another disk To add a mirror to a volume 1 Right click the basic or simple volume to which you want to add a mirror and then click Add mirror 2 Select the disk on which you want to place the mirror The disks that do not have enough unallocated space to create the mirror are not available for selection If you are adding a mirror to a basic volume or are placing the mirror on a basic disk you will receive a warning that the corresponding disk or disks will be converted to dynamic 3 Click OK to add the pending addition of a mirror to the volume operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 16 Removing a mirror Mirrored volumes provide fault tolerance by storing two exact copies of data called mirrors on two different disks Removing a mirror from a mirrored volume means converting that volume to a simple volume thus losing fault tolerance The space that was occupied by the removed mirror becomes unallocated space on the corresponding disk provided that that disk is not missing You may want to remove a mirror in the following cases When you need
6. Machines that are based on Extensible Firmware Interface EFI are not supported 2 2 Supported operating systems The following operating systems are supported by Acronis Disk Director Windows XP all editions Windows Vista all editions Windows 7 all editions 2 3 Supported file systems Acronis Disk Director supports the following file systems for performing operations FAT16 FAT32 NTFS Ext2 Ext3 Reiser3 Linux SWAP The operations resulting in a change of volume size that is Create p 25 Resize p 27 Copy p 28 Move p 28 Merge p 30 Split p 31 are not available for the XFS Reiser4 HPFS and JFS file systems 4 Supported media Hard disk drives HDD and solid state drives SSD Support for IDE SCSI and SATA interfaces CD R RW DVD R RW DVD R including double layer DVD R DVD RW DVD RAM BD R BD RE for bootable media creation USB 1 1 2 0 3 0 FireWire IEEE 1394 hard disk drives PC card storage devices Burned rewritable discs cannot be read in Linux without a kernel patch 2 5 Installing Acronis Disk Director To install Acronis Disk Director 11 1 Ifyou have the previous version of Acronis Disk Director remove it before proceeding with the installation of Acronis Disk Director 11 Run the setup file of Acronis Disk Director 11 Click Install Acronis Disk Director Accept the terms of the license agreement Type in your license key
7. Ona machine that has only one hard disk drive Ona machine that runs an older Windows operating system or an operating system other than Windows By using Acronis Disk Director you can convert a basic disk to a dynamic disk p 44 Dynamic disks These disks provide a greater functionality as compared to basic disks Dynamic disks can be used only by the Windows operating systems starting with Windows 2000 A dynamic disk can store one or more volumes called dynamic volumes Unlike a basic volume a dynamic volume can occupy more than one disk When to use dynamic disks Dynamic disks are most effective if your machine has more than one hard disk drive In this case you can Create a large volume that occupies several disks Add fault tolerance to your system and data by mirroring a volume such as the one with the operating system to another disk If a disk with one of these mirrors fails no data will be lost on such volume By using Acronis Disk Director you can convert a dynamic disk to a basic disk p 45 You may need to do so for example to install an operating system other than Windows on that disk Converting a dynamic disk to basic may require deleting some volumes on it such as volumes that occupy more than one disk 3 2 Types of basic volumes A basic disk can store two types of volumes primary volumes and logical volumes The main difference between a primary volume and a logical volume is that
8. Writing a block from a file The Write to file menu item lets you to save the selected block to a file It is a good practice to save the selected blocks before you begin to edit them This will help you to revert changes made to the given hard disk sectors and to restore the data To save a disk sector block to a file 1 Select the block that you need to save and then click Write to file 2 Inthe Write to file window click Browse and specify the path and file name 3 Click OK to save the file Tip You can create a selection right in the Write to file window in the Size filed specify the the number of bytes that will be selected from the current cursor position Reading a block from a file The Read from file menu item lets you read the block from a previously saved file and insert it into a disk sector To read a block from a file 1 Place the cursor to the necessary sector byte and click Read from file 2 Inthe Read from file window click Browse and specify the file 3 Click OK The file content will be inserted to a sector from the current cursor position 4 Click Save sector Ctrl S to save changes 8 2 4 View Information about disks and volumes in the Acronis Disk Editor window can be viewed and edited in several different modes You can select the appropriate view mode with the help of the View menu The editor offers seven view modes HEX hexadecimal mode Partition table FAT16 boot sector
9. Because this program runs under Linux it can locate any file on a disk by means of the operating system A disadvantage of such a mechanism is evident when moving or reducing the size of a Linux bootable volume In such cases Linux stops booting Preparing volumes for Linux installation Before you start installing Linux you have to prepare volumes for it Different Linux distributions may require a different volume structure so you will have to follow the installation instructions of your specific distribution Acronis Disk Director provides the easiest mechanism for preparing volumes for further use containing everything necessary for Linux file systems and volumes see Creating a volume p 25 If there is no unallocated space you can free it by resizing respective volumes see Resizing a volume p 27 Experienced Linux users can create volumes manually by means of their specific operating system installers Installing Linux Having created volumes you can start Linux installation from a bootable CD DVD with Linux distribution created from images that are usually located on the first installation CD DVD Because Linux is installed only into volumes prepared for it there is no need to create any special properties for the new operating system to hide or change status of any volumes After selecting the loader location you will have to remember that once placed into the MBR the loader will overwrite the Acronis OS Sele
10. Disk 2 Protecti GpT Microsoft LDM ve Reserved database MBR Partition MSR LDM Metadata partition Hae 1MB A dynamic MBR disk Disk 1 and a dynamic GPT disk Disk 2 For more information about dynamic disks please refer to the following Microsoft knowledge base articles Disk Management Windows XP Professional Resource Kit http technet microsoft com en us library bb457110 aspx 816307 Best practices for using dynamic disks on Windows Server 2003 based computers http support microsoft com kb 816307 Dynamic volume A volume on one or more dynamic disks Dynamic volumes provide greater functionality as compared to basic volumes but older operating systems such as Windows 98 might not be able to work with them Different types of dynamic volumes suit different purposes For example you can Increase the volume size beyond the capacity of a single disk by using a spanned volume Reduce access time to files by using a striped volume Achieve fault tolerance by using a mirrored volume For a complete list of volume types see Volume type p 93 F Fault tolerance The ability of a volume to ensure data integrity after a hardware failure Fault tolerance is usually achieved by introducing data redundancy which enables preserving data in case one of the hard disks containing the volume fails Examples of fault tolerant volumes include mirrored p 88 and RAID 5 volumes File A set of data
11. Western Windows encoding As we can see in character area this jpeg file begins with something like O A AI and ends with something like llo Normally when taking a picture the camera writes information about the manufacturer in every jpeg file This information is usually stored at the beginning of every file Thus by knowing how the file begins and ends plus having information about the manufacturer we have enough information to distinguish our jpeg files 2 In Acronis Disk Director right click the formatted volume G that stored the file you need to restore and then click Edit 3 In Acronis Disk Editor press the F2 key to switch to the Hex view mode Then select the Western Windows encoding on the toolbar 4 Press the Ctrl F key combination Then enter JFIF in the search field When this value is found take a look at the lines below to see information about the camera manufacturer If it does not contain the information that we are looking for we should search for the next JFIF entry until we find the one we are looking for 5 Once the required data is found create a selection as follows Select the beginning of the sector where the JFIF letter combination appears Then hold down the Shift key and use the arrow keys or Page Up and Page Down keys to select the rest of sectors up to the end of the sector where the OLF letter combination is Select the Write to file item in the Edit menu In the Write to file window
12. click Browse and specify the path and file name For example C image_1 jpeg Click OK to save the file Open this file in any image viewer If you see the image then you did everything right If you do not see the image make sure that you select the image data exactly as described in step 5 To restore another jpeg file repeat the steps 4 9 9 Glossary A Active volume The volume from which a machine starts If no operating systems other than Windows are installed on your machine the active volume is typically the same as the system volume p 91 If an operating system other than Windows such as Linux is installed on your machine the active volume can be the volume where the program known as a boot loader such as GRUB is stored The active volume is either a primary volume p 90 on a basic disk or a simple volume p 90 ona dynamic disk Only one volume on a disk can be active The active volume on a basic disk is also called the active partition Allocation unit See Cluster p 82 B Bad cluster A cluster p 82 that contains one or more bad sectors p 81 It is not possible to store data in or retrieve it from such cluster Bad sector A sector p 90 that cannot store the information written in it for example due to physical defects or aging of the magnetic surface Basic disk A disk that can be accessed by all versions of Windows as well as by other operating systems A basic
13. prepare as follows 1 Download and install Windows Automated Installation Kit WAIK Automated Installation Kit AIK for Windows Vista PE 2 0 http www microsoft com Downloads details aspx familyid C7 D4BC6D 15F3 4284 9123 679830D629F2 amp displaylang en Automated Installation Kit AIK for Windows Vista SP1 and Windows Server 2008 PE 2 1 http www microsoft com downloads details aspx FamilyID 94bb6e34 d890 4932 81a5 5b50c657de08 amp DisplayLang en Automated Installation Kit AIK for Windows 7 PE 3 0 http www microsoft com downloads details aspx familyid 696DD665 9F76 4177 A811 39C26D3B3B34 amp displaylang en optional Burn the WAIK to DVD or copy to a flash drive Install the Microsoft NET Framework v 2 0 from this kit NETFXx86 or NETFXx64 depending on your hardware 4 Install Microsoft Core XML MSXML 5 0 or 6 0 Parser from this kit 5 Install Windows AIK from this kit It is recommended that you familiarize yourself with the help documentation supplied with Windows AIK To access the documentation select Microsoft Windows AIK gt Documentation from the start menu 7 1 1 1 Linux based bootable media When using the media builder you have to specify 1 optional The parameters of the Linux kernel Separate multiple parameters with spaces For example to be able to select a display mode for the bootable Acronis Disk Director each time the media starts type vga ask For a list of parameters
14. 22 Acrornis DIsk Editor nee tatus eim et nni 73 8 2 1 Starting work with Acronis Disk Editor eese tenente ennt kek AK KAKA KAK AKAR KA KAKA KAKA KAKA 73 8 2 2 Main window menu and controls esee eene nennen ennt KEK AK HAA KAHR KRA HE HA KAKA HA 74 8 2 3 Editing disks ree rero e EH n a ia vade E RE a 74 8 24 MIC Wes dies d eee re ER EI RU E ere UR e ERE FER MERO TRE SER 75 8 25 Da 76 8 2 6 Usage examples ee tete A ce EGET rg gd 76 ClDr rlaugee T 81 1 Introducing Acronis Disk Director 11 Home Acronis Disk Director 11 is a powerful and easy to use tool for managing disks and volumes With a comprehensive set of operations you can organize your hard disk and volume configuration for optimal performance while keeping your data safe Key features Acronis Disk Director offers many features including Create both basic and dynamic volumes The handy Create Volume wizard has been improved to support dynamic volumes creation Now in addition to basic volumes you can easily create dynamic volumes in Acronis Disk Director to Increase the volume size beyond the capacity of a single disk by using a spanned volume Reduce access time to files by using a striped volume Achieve fault tolerance by using a mirrored volume Add remove or break mirrored volumes Make your basic or simple volume fault tolerant in just one action by adding
15. Commit p 20 Undo and Redo p 21 Disk Management view The disk management area contains the table of disks and volumes and the graphical panel 3 Table The table lists all the disks and their volumes and lets you select any of them to perform operations You can sort volumes by columns Click the column s header to sort the volumes in ascending order Click it once again to sort the volumes in descending order If required you can hide the shown columns and show the hidden ones To show or hide columns 1 Right click any column header to open the context menu The menu items that are ticked off correspond to the column headers presented in the table 2 Click the items you want to be displayed hidden 4 Graphical panel The graphical panel provides visual information about all the disks and their volumes for better understanding of the volume configuration The graphical panel also lets you select both the volumes and disks to perform operations on them 5 Actions and tools pane Provides quick access to the operations that can be performed on the selected disk or volume see Volume operations p 25 and Disk operations p 41 and Acronis tools see Tools p 49 4 5 Disk and volume information In the table and graphical panel along with the type size letter partitioning scheme and other information about disks and volumes you can also check their status The status helps you to estimate the condition of
16. Formatting The process of creating a file system on a volume After the volume is formatted you can place files and folders on it Fragmentation The scattering of parts of a file across different areas of the volume As a result of adding deleting and changing files many files can occupy space on the volume in multiple non contiguous pieces This requires more time to access such files The defragmentation p 83 process aims at improving access times by making fragmented files contiguous Free space Space on a volume that is not occupied by data such as files and folders Not to be confused with unallocated space p 92 ona disk G GPT disk A disk whose partitioning scheme p 89 is GUID partition table GPT GPT disks are typically used by 64 bit operating systems such as Windows XP Professional x64 Edition See also MBR disk p 88 GUID partition table GPT One of the two partitioning schemes of a disk See in Partitioning scheme p 89 H Hard disk A fixed storage media along with integrated electronics that consists of several magnetic platters that rotate synchronously on one spindle Hard disks have a relatively high capacity and high read write speed A hard disk is also called a hard disk drive Hidden volume A volume p 92 that is made invisible to an operating system Hiding a volume is usually done by changing its partition type p 89 I Initialization The process of
17. M E E kek KEKE KAKE KA KAKA KA KAKA KAKA KAKA 56 Acronis OS Select Pucca delia 58 Acronis Disk Editor ccscccccccecsssessaecececeseesssaeaeceeecesseseeaeseeeeseessessaaeens 73 7 1 Acronis Bootable Media Builder Acronis Disk Director has a bootable version that can run from bootable media without booting an operating system Bootable media is physical media CD DVD USB drive or other media supported by a machine BIOS as a boot device that boots on any PC compatible machine and enables you to run Acronis Disk Director either in a Linux based environment or Windows Preinstallation Environment WinPE without the help of an operating system You can create bootable media using Acronis Bootable Media Builder Acronis Bootable Media Builder also provides the ability to create an ISO image of a bootable disc on a hard disk There are situations in which you might prefer to run Acronis Disk Director from bootable media For example to use Acronis Disk Director on a non Windows systems like Linux if you do not often use Acronis Disk Director and therefore do not want to install it on the machine to access the data that has survived in a corrupted system to create basic or dynamic volumes on bare metal to perform offline operations on a boot volume that cannot be done online because of restricted access being permanently locked by the running applications or for any other reason If you have other Acronis products suc
18. MBR MBR disks are typically used by 32 bit operating systems such as Windows XP Professional Media builder A dedicated tool for creating bootable media Mirror Each of the two portions of disk space that make up a mirrored volume p 88 Each mirror occupies a separate hard disk Both mirrors are identical in size and content which ensures fault tolerance in case a hard disk with one of the mirrors fails The operation of converting a simple volume p 90 to mirrored is called adding a mirror Mirrored volume A fault tolerant volume whose data is duplicated on two physical disks p 90 Each of the two parts of a mirrored volume is called a mirror All of the data on one disk is copied to another disk to provide data redundancy If one of the hard disks fails the data can still be accessed from the remaining hard disks Volumes that can be mirrored include the system volume p 91 and a boot volume p 82 A mirrored volume is sometimes called a RAID 1 volume p Partition type A hexadecimal number that normally identifies the type of a volume or the volume s file system p 86 For example a partition type of 07h identifies a volume whose file system is NTFS By assigning a particular partition type to a volume you can mark the volume as a hidden volume p 87 For example changing the partition type of an NTFS volume to 17h makes that volume hidden Partitioning The process of creating a logical st
19. PE ISO This comes in handy when you have to add the plug in to the previously configured PE ISO that is already in use Creating the PE ISO with the plug in from scratch Adding the Acronis Plug in to a WIM file for any future purpose manual ISO building adding other tools to the image and so on To be able to perform any of the above operations install Bootable Media Builder on a machine where Windows Automated Installation Kit WAIK is installed If you do not have such machine prepare as described in How to create bootable media p 50 Bootable Media Builder supports only x86 WinPE 2 x or 3 0 These WnPE distributions can also work on x64 hardware A PE image based on Win PE 2 0 requires at least 256MB RAM to work The recommended memory size for PE 2 0 is 512MB A PE image based on Win PE 3 0 requires at least 512MB RAM to work Adding Acronis Plug in to WinPE 2 x or 3 0 ISO To add Acronis Plug in to WinPE 2 x or 3 0 ISO 1 When adding the plug in to the existing Win PE ISO unpack all files of your Win PE ISO to a separate folder on the hard disk 2 Start the Bootable Media Builder either by selecting Tools gt Create Bootable Media or as a separate component 3 Select Bootable media type Windows PE When creating a new PE ISO Select Create Windows PE 2 x or 3 0 automatically The software runs the appropriate script and proceeds to the next window When adding the plug in to the existing PE ISO Sele
20. Selector allows you to hide hard disk volumes except for the system To hide a volume select it and enable the Hidden option for it This is not applicable to Windows 2000 volumes You can perform this operation under that operating system using the Advanced section Disks Generally Windows can boot from the HDD only if its boot files reside on the first according to BIOS hard disk see Installing and using several operating systems on a single machine p 67 If you connect a live system HDD taken from another computer where it was the first disk to your computer where it becomes the second 3rd etc disk boot from that HDD will be impossible even if the hardware is identical on both computers OS Selector can manage situations like that and automatically set the disk order required for booting the selected operating system Moreover you can choose the disk order when installing a new Windows operating system so that its boot files are installed on the same disk where its main part resides see Installing another Windows OS on a different disk p 70 Doing so makes operating systems on your first second and so on disks fully independent You will be able for example to boot from the second disk even if the first one is damaged or disconnected You also will be able to individually back up and restore each system disk every operating system will be bootable when restored to its disk Changing the disk order for an operat
21. To convert a logical volume to primary 1 Right click the logical volume that you want to convert to primary and then click Convert to primary 2 Click OK to add the pending logical volume to primary conversion operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 13 Changing a partition type This operation changes the partition type of a volume a hexadecimal number that normally identifies the file system or the intended use of the volume For example NTFS volumes have a partition type of 07h By changing the partition type you can hide the volume from the operating system To change a partition type 1 Right click the volume whose partition type you need to change and then click Change partition type 2 Select the desired partition type from the list for example 017h Hidden NTFS HPFS 3 Click OK to add the pending partition type changing operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 14 Setting a volume active This operation applies to primary volumes on basic MBR
22. a cluster size Changing a cluster size of a volume affects the amount of free used disk space Smaller cluster sizes allow for more efficient storage of smaller files by reducing the amount of wasted disk space Furthermore larger files may become more fragmented across the volume increasing the amount of time that is needed to access them Bigger cluster sizes improve performance by decreasing the time to access to larger files However having a bigger cluster size wastes disk space if the typical size of the files stored on the volume is smaller than the cluster size To change cluster size 1 Right click the volume whose cluster size you need to change and then click Change cluster size 2 Select the required cluster size from the list The default cluster size is marked in the list as default The default cluster size depends on the volume size and the type of the file system For example the default cluster size for up to 2 TB NTFS volumes is 4 KB Important The program does not allow you to select a particular cluster size if the free volume space will decrease to the point where the data will not fit on the volume Some programs do not work correctly with volumes whose file systems have big cluster sizes such as a cluster size of 64 KB in the FAT16 and FAT32 file systems and cluster sizes of 8 KB through 64 KB in the NTFS file system For example these programs may incorrectly calculate the total and available space on
23. a disk group is considered as foreign Foreign group disks cannot be used until they are imported into the existing disk group A foreign group is imported as is will have the original name if no disk group exists on the machine To access data on foreign disks you have to add these disks to your machine s system configuration using the Import foreign disks operation All dynamic disks of the foreign disk group are imported at the same time you cannot import just one dynamic disk To import foreign disks 1 Right click one of the foreign disks and then click Import foreign disks The appearing window lists all foreign dynamic disks that were added to the machine and displays information about volumes that will be imported Volume statuses lets you detect whether you are importing all the required disks of the disk group When importing all the required disks all their volumes have the Healthy status Statuses other than Healthy indicate that not all of the disks were imported For more information on volume statuses please refer to the following Microsoft article http technet microsoft com en us library cc771775 aspx 2 Click OK to add the pending foreign disks importing operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effecti
24. as is Files This section allows you to specify the location of system files required by the given operating system and edit these files Examples of system files might be command com config sys msdos sys and autoexec bat For all Windows operating systems the list of system files is populated automatically and can be changed if needed Properties of system files will provide you with the following options Automatic deletion of a selected file with Acronis OS Selector under the given OS Check Yes delete when the operating system starts to enable the option This might become necessary when two system files are in conflict causing possible OS bootup problems During installation Acronis OS Selector automatically determines system files of any Windows versions and makes them Changeable You can change this option manually if needed For operating systems that use FAT16 FAT32 file systems the 10 SYS file must be located in the starting 2 KB of the root folder If you set a fragmentation limit for this file in bytes Acronis OS Selector will automatically defragment it when the limit is exceeded Advanced You cannot hide a volume under a Windows 2000 operating system just by setting the Hidden p 63 options To perform this operation you will need to check the Force hiding partitions box available in this section 8 1 4 Editing operating systems This section provides the means of operating system and shortcut manage
25. basic to dynamic using the Convert to dynamic operation 6 4 Disk conversion GPT to MBR You may want to convert a basic GPT disk to a basic MBR disk in case you need to install an operating system and software that do not support GPT disks The program lets you convert a disk from GPT to MBR with the following implications All volumes of the disk will be logical Boot volumes if any will be unbootable until you convert them to primary volumes see Converting a logical volume to primary p 34 Volumes that allocate more than 2 TB from the beginning of the disk become inaccessible To convert a GPT disk to MBR 1 Right click the GPT disk you need to convert to MBR and then click Convert to MBR A warning window will pop up stating that you are about to convert GPT into MBR You will be explained the changes that will happen to the system after the chosen disk is converted from GPT to MBR For example if such conversion will stop the disk from being accessed by the system the operating system will stop loading after such conversion or some volumes on the selected GPT disk will not be accessible with MBR e g volumes that allocate more than 2 TB you will be warned here about such implications 2 Click OK to add the pending GPT to MBR disk conversion operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it
26. disk is online To avoid data loss we recommend you to repair the volume as soon as possible To find out more information about disk statuses please refer to the Volume status descriptions article on the Microsoft website Important For instructions explaining how to repair volumes with erroneous statuses please refer to the Troubleshooting Disk Management article on the Microsoft website 4 6 Disk layout On a machine with two or more operating systems representation of disks and volumes depends on which operating system is currently running A volume may have a different letter in different Windows operating systems For example volume E might appear as D or L when you boot another Windows operating system installed on the same machine It is also possible that this volume will have the same letter E under any Windows operating system installed on the machine Moreover a dynamic disk created in one Windows operating system is considered as a Foreign Disk in another Windows operating system or might even be unsupported by this operating system When you need to perform a disk management operation on such machine it is necessary to specify for which operating system the disk management operation will be performed i e specify the disk layout The name of the currently selected operating system is shown on the toolbar after Disk layout Click the operating system name to select another operating system in the Operatin
27. disks To specify the volume from which the machine will start you need to set a volume to become active A disk can have only one active volume so if you set a volume as active the volume which was previously active will be automatically unset To set a volume active 1 Right click the primary volume you want to set as active and then click Mark as active If there is no other active volume in the system the pending volume setting active operation volume will be added Note By setting the new volume active the former active volume letter might be changed and some of the installed programs might stop running 2 If another active volume is present in the system you will receive a warning that the previous active volume will no longer be active Click OK in the Warning window to add the pending volume setting active operation Even if you have the operating system on the new active volume in some cases the machine will not be able to boot from it You will have to confirm your decision to set the new volume active The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 15 Adding a mirror Mirrored volumes provide fault tolerance by storing two exact copies of data called mirrors on two different disks
28. extra unallocated space on a disk containing one of the mirrors at the expense of losing fault tolerance When a disk containing one of the mirrors becomes missing for example after you replaced a failed hard disk drive with a new one You can later make the volume fault tolerant again by adding a mirror to it see Add mirror p 35 You cannot remove a mirror when both disks containing the mirrored volume are missing To remove a mirror from a mirrored volume 1 Right click the mirrored volume from which you want to remove a mirror and then click Remove mirror 2 Select the mirror that you want to remove Note If one of the mirrors is located on a missing disk you can remove only that mirror 3 Click OK to add the pending mirror removal operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 17 Breaking a mirrored volume Mirrored volumes provide fault tolerance by storing two exact copies of data called mirrors on two different disks Breaking a mirrored volume means converting its two mirrors into two independent simple volumes with initially identical content One of the two volumes will retain the drive letter and volume label of the mirrored volume You can assign a drive letter and or
29. file window click Browse and specify the file storing the MBR code Click OK The file content will be inserted into a sector from the current cursor position Press Ctrl S key combination to save changes Reboot the machine 8 2 6 2 Copying the MBR to another disk This example applies to basic disks whose partitioning scheme is MBR You need to copy the source disk s MBR code if you move the system volume from this disk to a target disk that does not have MBR or has a different loader To copy the MBR to another disk 1 99 mo gv ur In Acronis Disk Director right click the source disk whose MBR code you need to copy and then click Edit In Acronis Disk Editor press the F2 key to switch to the Hex view mode Place the cursor at the very beginning of the first sector byte Absolute sector 0 or 0000 in Hex Then hold down the Shift key and use the arrow keys to select the first 445 bytes of the sector This will select the MBR code and disk signature Tip The exact cursor position is displayed in the Position field on the status bar in the bottom right corner of the window Select the Write to file item in the Edit menu In the Write to file window click Browse and specify the path and file name Click OK to save the file Press Alt F4 to quit Acronis Disk Editor In Acronis Disk Director right click the target disk where to copy the MBR code and then click Edit In Acronis Disk Editor press the F2 key to sw
30. media Operations ona machine booted with bootable media are almost the same as operations in the running operating system The difference is as follows 1 The Check volume p 37 and Defragment volume p 37 operations are not available under bootable media 2 Specify the disk layout p 19 if two or more Windows operating systems installed on the machine If only one Windows operating system is installed the disk layout of this operating system will be used For bare metal or if no Windows operating system is found the disk layout will be used according to the bootable media environment Linux based or Windows PE 3 The Linux based bootable media shows local disks and volumes as unmounted sda1 sda2 The log lifetime is limited to the current session You can save the entire log or the filtered log entries to a file 7 1 2 1 Setting up a display mode For a machine booted from media a display video mode is detected automatically based on the hardware configuration monitor and graphics card specifications If for some reason the video mode is detected incorrectly do the following 1 Inthe boot menu press F11 2 Add the following command to the command prompt vga ask and then proceed with booting 3 From the list of supported video modes choose the appropriate one by typing its number for example 318 and then press ENTER If you do not wish to follow this procedure every time you boot from media on a give
31. of the options below Yes protect folders folder protection will be enabled automatically when new operating systems are detected Settings for the existing operation systems will be left intact No do not protect folders Acronis OS Selector will not enable folder protection when new operating systems are detected 8 1 6 2 Startup options In this section you can set Acronis OS Selector bootup behavior At once ESC for menu if activated Acronis OS Selector will boot the default operating system and you will have to press Escape to enter the boot menu With timeout if activated the default operating system will be booted after an interval in seconds Disable you will have to manually select an operating system from the boot menu This is active by default 8 1 6 3 Display properties Acronis OS Selector can control monitor video modes before Windows is booted and the graphics card and monitor drivers are loaded The following properties are available in the Options Display properties section Resolution you can manually set the resolution you want provided that it is supported by your graphics card and monitor and ranges from VGA 640 x 480 to SXGA 1280 x 1024 Bit depth you can set the number of colors displayed choosing among Low 8 bit 256 colors Medium 16 bit 65 536 colors and High 24 bit 16 777 216 colors Refresh rate you can manually set the display refresh
32. on up to 32 disks Unlike mirrored p 88 and RAID 5 volumes spanned volumes are not fault tolerant Unlike striped volumes p 91 spanned volumes do not provide faster data access Stripe Each of the several equally sized portions of disk space that make up a striped volume p 91 ora RAID 5 volume Each stripe occupies a separate hard disk A striped volume consists of two or more stripes A RAID 5 volume consists of three or more stripes Striped volume A volume that resides on two or more dynamic disks and whose data is evenly distributed across equally sized portions of disk space called stripes on those disks Access to data on striped volumes is usually faster than on other types of dynamic volumes because it can be performed simultaneously on multiple hard disks Unlike a mirrored volume p 88 a striped volume does not contain redundant information so it is not fault tolerant A striped volume is also known as a RAID 0 volume Swap file A file p 85 that is used by an operating system to store data that does not fit in the physical memory of the machine Use of the swap files enables more programs to run than would otherwise be allowed by the memory limitations The operating system unloads currently unneeded data to the swap file and loads needed data from the swap file into memory A swap file is also called a paging file System folder A folder that contains files that are necessary for an oper
33. or more disks where you want to create the new volume If the new volume is basic select one basic disk and specify one region of unallocated space on that disk jfthe new volume is simple or spanned select one or more disks If the new volume is striped select two or more disks m Ifthe new volume is mirrored select two disks Note for striped and mirrored volumes Because these volumes occupy space on their disks in equal parts the maximum size of such volume will depend on the selected disk with the least amount of unallocated space 4 Specify the size of the new volume This size cannot be less than the size of data on the original volume For a basic volume you can increase its size only by taking unallocated space that is adjacent to it In the volume layout diagram at the bottom of the window you can specify the space that the volume will occupy on each of the selected disks by typing the sizes or by dragging the sliders 5 Click Finish to add the pending volume copying operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 4 Moving a volume This operation moves a volume by creating a new volume copying the original volume s content to it and then deleting the original volume
34. p 20 Exiting the program without committing the pending operations will effectively cancel them 6 5 Disk conversion basic to dynamic You would want to convert a basic disk to dynamic in the following cases If you plan to use the disk as part of a dynamic disk group If you want to achieve additional disk reliability for data storage To convert a basic disk to dynamic 1 Right click the basic disk you want to convert and then click Convert to dynamic You will receive a final warning about the basic disk being converted to dynamic 2 Click OK to add the pending basic to dynamic disk conversion operation Note A dynamic disk uses the last megabyte of the physical disk to store the database including the four level description Volume Component Partition Disk for each dynamic volume If during the conversion to dynamic it turns out that the basic disk is full and the size of its volumes cannot be decreased automatically the basic disk to dynamic conversion operation will fail The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them Should you decide to revert your dynamic disks back to basic ones for example if you want to start using an operating system on your machine that does not support dynamic disks you c
35. panel to review detailed information on the selected log entry The panel is collapsed by default To expand the panel click the la chevron The content of the panel is also duplicated in the Log entry details window 4 8 1 Actions on log entries The following is a guideline for you to perform actions on log entries All the operations described below are performed by clicking the corresponding items on the log toolbar To Do Select a single log entry Click on it Select multiple log non contiguous hold down CTRL and click the log entries individually entries u contiguous select a single log entry then hold down SHIFT and click another entry All the entries between the first and last selections will be selected too E View a log entry s details Select a log entry 2 Do one of the following Click View Details The log entry s details will be displayed in a separate window Expand the Information panel by clicking the a chevron Save the selected log 1 Select a single log entry or multiple log entries entries to a file 2 Click F Save Selected to File 3 In the opened window specify a path and a name for the file Save all the log entries 1 Make sure that the filters p 22 are not set to a file n 2 Click A Save All to File 3 Inthe opened window specify a path and a name for the file Save all the filtered log 1 Set filters p 22 to get a list of the log entries that satisfy th
36. pending operation can be undone or redone To undo the latest pending operation in the list do any of the following u Click the Undo button on the toolbar m Press Ctrl Z Undoing an operation results in canceling one or more pending operations While the list is populated this action is available To redo the last pending operation that was undone do any of the following Click the Redo button on toolbar u Press Ctrl Y 4 8 Log The Log stores the history of operations performed on the machine using Acronis Disk Director For instance when you create a new volume the respective entry is added to the log With the log you can examine information about disk and volume operations including reasons any for failures Physically a log is a collection of XML files stored on the machine Operations performed using bootable media are logged as well but the log s lifetime is limited to a current session Rebooting eliminates the log but you can save the log to a file while the machine is booted with the media To browse the Log Select View gt View log from the menu Way of working with the log Use filters to display the desired log entries You can also hide the unneeded columns and show the hidden ones See the Filtering and sorting log entries p 22 section for details Inthe log table select the log entry or log entries to take action on it see Actions on log entries p 21 Use the Information
37. rate which is set to 60Hz by default If you select Optimal the program will determine your graphics configuration automatically and set the maximum available refresh rate The maximum rate that can be set manually is 150Hz 8 1 6 4 Passwords You can set change or remove Acronis OS Selector global passwords including Boot menu password asked for each time Acronis OS Selector starts except for cases when the boot menu is disabled to boot the default operating system immediately Administrator password required when a user tries to change any options and settings of Acronis OS Selector and operating systems To disable global passwords leave both input fields blank When the default operating system is booted without invoking the boot menu you might have to enter the boot menu password running Acronis OS Selector under Windows 8 1 6 5 Input devices In this section of Acronis OS Selector options you can provide extended support of input devices mouse etc in Acronis OS Selector boot menu Using the Default parameter the program automatically determines installed input devices If needed you can manually specify an input device to use Mouse or compatible device touch pad TrackPoint or its notebook equivalent on PS 2 or USB Mouse on COM1 Mouse on COM2 Do not use mouse 8 1 7 Installing and using several operating systems on a single machine One of the key benefits offered by Acronis OS Sele
38. registering a disk in the operating system Initialization involves assigning a partitioning scheme p 89 MBR or GPT and a type basic or dynamic to the disk Initialization is usually performed when you add a new hard disk drive to the machine L Logical drive See Logical volume p 87 Logical volume A volume which is located on a basic MBR disk p 88 and is not a primary volume p 90 Logical volumes usually store user data and sometimes the files that are used by the installed operating systems Unlike the number of primary volumes the number of logical volumes on the disk is unlimited A logical volume is also called a logical drive M Machine A physical or virtual computer uniquely identified by an operating system installation Main volume Of two volumes being merged the volume on which the other volume s files and folders will be placed After the two volumes are merged into one the resulting volume has the drive letter and volume label of the main volume Master boot record partitioning scheme One of the two partitioning schemes of a disk See Partitioning scheme p 89 Master boot record sector The first sector p 90 on a hard disk p 87 This sector usually stores information about the hard disk partitioning p 89 It also stores a small program that initiates the booting p 82 of the machine MBR disk A disk whose partitioning scheme p 89 is master boot record
39. see Kernel parameters p 51 2 The Acronis bootable components to be placed on the media Acronis Disk Director Bootable version of the product that has almost the same functionality as in the Acronis Disk Director for Windows operating systems see Working under bootable media p 54 for details 3 optional The timeout interval for the boot menu plus the component that will automatically start on timeout If not configured the Acronis loader waits for someone to select whether to boot the operating system if present or the Acronis component If you set say 10 sec Acronis Disk Director will launch 10 seconds after the menu is displayed 4 The type of media to create You can create CD DVD or other bootable media such as removable USB flash drives if the hardware BIOS allows for boot from such media build an ISO image of a bootable disc to burn it later on to a blank disc 5 Path to the media ISO file Kernel parameters This window lets you specify one or more parameters of the Linux kernel They will be automatically applied when the bootable media starts These parameters are typically used when experiencing problems while working with the bootable media Normally you can leave this field empty You also can specify any of these parameters by pressing F11 while in the boot menu Parameters When specifying multiple parameters separate them with spaces acpi off Disables Advanced Configura
40. such as a text document that is stored under an identifying name for example Document txt Files are stored in a file system p 86 on a volume In different file systems files can be stored in different ways with different file name requirements and different ways to write the full path to the file in the folder p 86 tree File system A data structure that is used to store and manage files p 85 on a volume A file system tracks free and occupied space supports folders p 86 and file names and stores the physical positions of files on a disk Examples of file systems that are supported in Windows are FAT16 also known simply as FAT FAT32 and NTES Examples of file systems that are supported in Linux are ext2 and ext3 When formatting p 86 a volume you can choose a file system for it Folder A named container for files that are stored on a volume A folder can contain other folders sometimes called subfolders In the file system p 86 a folder is a table that contains a description of files p 85 and other folders Such a structure allows creation of a folder tree that begins with the root folder p 90 Foreign disk A dynamic disk which is a part of a foreign dynamic disk group p 86 Foreign dynamic disk group A group of dynamic disks that is not native for the currently running operating system To be able to use such disks you need to import them to the existing disk group on the machine
41. such volumes Acronis Disk Director displays warning messages when you select such cluster sizes 3 Click OK to add the pending cluster size changing operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 22 Changing a file system This operation lets you change the volume file systems of the following type FAT16to FAT32 and back Ext2 to Ext3 and back The table below describes main differences between the file systems Feature FAT16 FAT32 Ext2 Ext3 Maximum volume 2 GB 4 KB 2 TB 4 KB 2 TB 4 KB Block 2 TB 1 KB Block size Cluster Size or Cluster Size or Size or 32 TB Size or 32 TB 4 GB 64 KB 8 TB 64 KB 8 KB Block 8 KB Block Cluster Size Cluster Size Size Size Maximum file size 2 GB 4GB 2 TB 2 TB Maximum file 255 255 255 254 name length Partitioning MBR MBR MBR GPT APM MBR GPT scheme To change a file system 1 Right click the volume whose file system you need to convert and then click Change file system 2 Select the required file system 3 Click OK to add the pending file system changing operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the pr
42. the machine The Turn off the machine after the cloning operation check box is selected and disabled automatically Click Finish to add the pending operation Click Commit on the toolbar and then click Proceed in the Pending Operations window Wait until the task is finished Wait until the machine is turned off Qu sc dl pa Disconnect either the source or the target hard disk drive from the machine 7 Start up the machine If you need to leave an NT signature 1 Click to clear the Copy NT signature check box if necessary 2 Click Finish to add the pending operation 3 Click Commit on the toolbar and then click Proceed in the Pending Operations window 4 Waituntil the task is finished 6 3 Disk conversion MBR to GPT You may want to convert an MBR basic disk to a GPT basic disk in the following cases If you need more than four primary volumes on one disk If you need additional disk reliability against any possible data damage If you need to make a volume whose size is over 2 TB Important If you have a primary volume belonging to an MBR disk and convert the disk first to GPT and then back to MBR the volume will be logical and will not be able to be used as a boot volume You can convert this volume to primary as described in Converting a logical volume to primary p 34 Important The basic MBR disk that contains the boot volume with the currently running operating system cannot be converted to GPT
43. the product installation and guides you through the installation and upgrade of Acronis Disk Director In this section Hardware requirementS ccoooccccnonoccncnononnncnonnnnncnanononconnnnnnnnnnnnnnnonnnnnnnnnnnnss 7 Supported operating SYyStemS E kek kek nano kk nennen 7 Supported file SYStEMS csccccssccesscecsnecesseecsseeecseessauecssseecsesessueesseeesenees 7 Supported Media k ctii eerte Team peace ce 8 Installing Acronis Disk Director EEE Eke kek kek k k kk kk 8 Installing Acronis OS Selector L kk xek kek kk kk kk kK 8 Updating Acronis Disk D F CtOr EE Eek xek kek k k kk kK 9 Removing Acronis Disk D F CtOF u Eke kk kek k k kk kK 9 Upgrading Acronis Disk Director nnns 9 Demo version information eese eene nennen 9 Technical Support eo ette G le del tede de tinere de a H K Ae W dane e RENE IURE 10 2 1 Hardware requirements The table below lists the minimum and recommended hardware requirements to install and run Acronis Disk Director Item Minimum Recommended requirements Boot firmware BIOS based Computer processor Modern processor 1 GHz 32 bit x86 or 800 MHz or faster 64 bit x64 processor System memory 256 MB 512 MB or more Screen resolution 800 600 pixels 1024 768 pixels or higher Installation disk space 150 MB Other hardware A mouse A CD DVD recording drive or a flash drive for bootable media creation
44. they form a single entity A foreign group is imported as is will have the original name if no disk group exists on the machine For more information about disk groups please refer to the following Microsoft knowledge base article 222189 Description of Disk Groups in Windows Disk Management http support microsoft com kb 222189 EN US Disk type The type of disk which is determined by the way the disk is organized A disk has one of two types basic disk p 81 or dynamic disk p 84 Drive A physical device for accessing information on a disk p 83 Examples of drives include hard disk drives p 87 and floppy disk drives Drive letter See Volume letter p 92 Dynamic disk A hard disk that is managed by Logical Disk Manager LDM which is available in Windows starting with Windows 2000 Use of LDM helps to flexibly allocate volumes on a disk for fault tolerance better performance or larger volume size A dynamic disk can use either the master boot record MBR or GUID partition table GPT partitioning scheme p 89 Each dynamic disk has a hidden database where the LDM stores the configuration of all dynamic volumes existing in the disk group which makes for better storage reliability On an MBR disk this database occupies the last 1 MB of the disk On a GPT disk Windows creates the dedicated LDM Metadata partition taking space from the Microsoft Reserved Partition MSR Disk 1 LDM database 1 MB
45. to a target disk The source disk volumes can be cloned to the target disk as is or resized automatically with respect to the target disk size You may want to use cloning in the following cases If you are about to replace an old hard disk with a new one without reinstalling operating systems and applications on the new disk If you want to transfer all the volumes and their contents from the existing disk to a larger one If you want to have an exact copy of one disk on another disk Important If you use an Acronis backup product such as Acronis True Image Home avoid cloning a disk that contains the Acronis Startup Recovery Manager ASRM component of that product Otherwise the machine might not be able to boot from the target disk To clone a basic disk 1 2 3 4 Do any of the following Right click the basic disk you want to clone i e a source disk and then click Clone basic disk Select Clone basic disk from the Actions pane The program displays a list of partitioned disks and asks you to select the source disk from which data will be transferred to another disk In the Select a disk as target for the cloning operation window select a basic disk as target for the cloning operation The program enables you to select a target disk if its size is sufficient to hold all the data from the source disk without any loss If there is some data on the target disk you will receive a warning stating tha
46. 4 Acronis COMPUTE WITH CONFIDENCE WWW ACRONIS COM Acronis Disk Director 11 Home User s Guide Copyright Acronis Inc 2000 2010 All rights reserved Acronis Acronis Compute with Confidence Acronis Recovery Manager Acronis Secure Zone Acronis Try amp Decide and the Acronis logo are trademarks of Acronis Inc Linux is a registered trademark of Linus Torvalds VMware and VMware Ready are trademarks and or registered trademarks of VMware Inc in the United States and or other jurisdictions Windows and MS DOS are registered trademarks of Microsoft Corporation All other trademarks and copyrights referred to are the property of their respective owners Distribution of substantively modified versions of this document is prohibited without the explicit permission of the copyright holder Distribution of this work or derivative work in any standard paper book form for commercial purposes is prohibited unless prior permission is obtained from the copyright holder DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS REPRESENTATIONS AND WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NON INFRINGEMENT ARE DISCLAIMED EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID Third party code may be provided with the Software and or Service The license terms for such third parties are detailed in the license txt file locate
47. KS sss Wc rti eE EEEE EEEIEE EE aE REONE aiK ERSE 11 3 2 Types of basic VOLUMES sssi tete ere o k za W n aiaa aa EE e a kenin e e eed aE ae 11 3 3 Types of dynamic volumes kal cased eesbsecede cinc cena re d la dln sakal va seceesecebeudeesedgeeduee 12 3 4 Active system and boot VOlUm6 S EE kk nennen keka ka KE KA KAKA KA KE A KA KA KA KAKA KA KA 13 3 5 Dynamic volume types support nennen k keka ka kK KAKA KAKE KEKE KA KA KA KAKA A KA KA KA KAKA KA 13 3 6 Volume alignment in disks with a 4 KB sector size kek kek kk ke kk KA HA 14 eauhecac 16 AL Precautions ysna i T A E 16 42 UWserprivlleBges EEE E E EAA EEE EE EE E A AEA E EAE 16 4 3 Running Acronis Disk Director ccccsssccccceesssesseseceeeceseesssaeaeeeeecesseseaaeceeeeseeeseseaeeeeeeeseeseaaaes 16 4 4 Acronis Disk Director main W ndOW Eek kk kk kk KE k KE KAKA KAKA KAKA KA KA A KA AKA 17 4 5 Disk and volume information l llllii keke kk k KE KAKE KAKA KAKA KAKA A KA KA KA A KA 18 45 1 JDiskStatuses ic ANT 18 45 2 VOl mae Stat S S ya ien diy n lad C eei otc dede tu notan ded end 19 e 19 4 7 Performing operations iride a b k k desee k n adan k densus Pede aco se egens gears ode sagen d deRgrfe 4 7 1 Pending operations sc i y1 liyan nera del GEN R k da Pri RR IN ra RER bra Rer evt eunte Reeve n dek k 4 7 2 Undoing pending ope
48. Recovery Expert It will help you to recover boot sectors and partition tables on hard disks and make your system bootable again The Recovery Expert first attempts to recover volumes as is i e logical volumes will be recovered as logical and primary as primary respectively If the primary volume cannot be recovered as is it will be recovered as logical Also if the logical volume cannot be recovered as is it will be recovered as primary To run Acronis Recovery Expert Select Tools gt Acronis Recovery Expert from the top menu Recovering volumes in automatic mode The automatic mode is easy to use and requires minimal effort The program will try to find and recover all the deleted volumes on all basic disks 1 Inthe Recovery mode window choose Automatic 2 Inthe Searching for deleted volumes window Acronis Recovery Expert scans all the basic disks for deleted volumes First Acronis Recovery Expert checks your disks for unallocated space If there is no unallocated space you will be asked to close the Recovery Expert If unallocated space is found then the Recovery Expert starts searching for traces of deleted volumes The Recovery Expert checks the beginning of each side of every cylinder of every disk for boot sectors A boot sector is the first sector of a volume that contains information about this volume even after its deletion Once a deleted volume is found it will be displayed in the volume list The search will ho
49. Search lets you search a volume or a hard disk for any line or any sequence of characters and go to a certain disk sector according to its absolute offset Help lets you get help concerning the editor window the program s manufacturer and version Using controls While all the operations can be accessed from the menu the most frequently used operations are available on the toolbar You can access almost all of the program s main functions or menu items with the help of F1 F2 F10 keyboard shortcuts and combinations like Ctrl O Ctrl F Alt P etc For example the dialog window for searching volumes and or hard disks for lines is performed by pressing the Ctrl F key combination You can go to a sector according its absolute offset by pressing Alt P You can switch between various main window view modes For example press F2 for the As Hex view mode F6 for the As Partition Table view mode F7 for the As Boot Sector view mode There are other available shortcut keys The list of encodings is used to interpret the hard disk sector content Selecting the necessary encoding will allow you to view the sector s content correctly interpreted in the right part of program s main window in the Hex mode 8 2 3 Editing disks The Edit menu lets you access the main operations with blocks of given hard disk sectors You can edit hard disk data directly in the fields of any view mode see View p 75 Let us consider the disk editin
50. Skip this step if you want to evaluate the demo product version p 9 nn ME D2 IS Select whether you want to install the program for all users on this machine or for the current user only 7 Proceed with installation 2 6 Installing Acronis OS Selector To install Acronis OS Selector you need to first install Acronis Disk Director p 8 Then select Start gt All Programs gt Acronis gt Disk Director gt Install Acronis OS Selector and follow the setup program instructions If you already have Acronis OS Selector installed on your machine it will be replaced by the new version Acronis OS Selector can be installed on volumes of basic MBR disks only During the installation of Acronis OS Selector the hidden system folder BOOTWIZ will be created on your machine to keep the program loader Acronis OS Selector will also copy operating system files found on your machine into this folder to avoid problems during the booting process and to simplify adding a new operating system in the future Acronis OS Selector can be installed in the Typical or Custom mode During Typical installation the BOOTWIZ folder will be created in the system hard disk volume that contains the Windows files and folders Using the Custom installation option you will be able to select the location of the BOOTWIZ folder This might come in handy when a system volume is accidentally destroyed or damaged In that case you will be able to access the Ac
51. Unlike moving all files from the volume moving the volume itself ensures that the entire content of the new volume is the same This is important if you are moving a volume from which Windows starts The original and new volumes can have different types For example you can move a striped volume as a larger simple volume Tip If you want to relocate a basic volume within the same disk you can use the resizing a volume p 27 operation instead of this operation Namely you can leave the size of the volume unchanged but change the amount of unallocated space before and after the volume For details about moving a volume from which the machine or a Windows operating system starts see Moving system boot and active volumes later in this section Caution Avoid moving a volume from which an operating system other than Windows such as Linux starts Otherwise that operating system may become unbootable To move a volume 1 Select the volume that you want to move and then click Move volume 2 Select the type that the new volume will have The default type is that of the original volume 3 Depending on the type of the new volume specify one or more disks where you want to create the new volume If the new volume is basic select one basic disk and specify one region of unallocated space on that disk If the new volume is simple or spanned select one or more disks If the new volume is striped select two or m
52. When resizing a basic volume To be able to use only unallocated space that is adjacent to the volume click Leave the volume as basic The volume will remain a basic volume To be able to use unallocated space from all dynamic disks on the machine click Convert the volume to simple spanned The volume will be converted to a simple or spanned volume and the corresponding disk will become dynamic Note This option is not available if the volume is the system volume a boot volume or the active volume If you choose the Leave the volume as basic option the following options are available Append all unallocated disk space to the volume With this option all unallocated space on the disk will become adjacent to the volume that you are resizing This may involve relocating other volumes within the disk As a result you will be able to extend the volume by using all unallocated space including the unallocated space that is not currently adjacent to the volume while keeping the disk as a basic disk When this check box is selected the following option is available Take free space from other volumes With this option other volumes on the disk will be reduced so that only a specified percentage of the corresponding current free space will remain on each of those volumes As a result you will get additional unallocated space which will be adjacent to the volume that you are resizing By default this option does not app
53. a disk or volume 4 5 1 Disk statuses Check the disk status to estimate whether the disk is functioning without problems Disk statuses are displayed in the graphical panel below their capacity Here are brief descriptions of the most common disk statuses Online A basic or dynamic disk is accessible and functioning correctly This is the normal disk status You can change an online disk to offline see Changing a disk status online to offline p 46 Online Errors 1 O errors are found on a dynamic disk If a disk has errors we recommended you to repair it as soon as possible to avoid data loss Offline A dynamic disk is accessible in read only mode if you switched it to offline previously or not accessible at all corrupted or intermittently unavailable You can make the disk that you previously switched to offline fully accessible see Changing a disk status offline to online p 46 Foreign This status occurs when you move a dynamic disk to your machine from another computer To access data on foreign disks you have to add these disks to your machine s system configuration see Importing foreign disks p 47 or convert them to basic disks see Disk conversion dynamic to basic p 45 Missing A dynamic disk is corrupted powered down or disconnected Not Initialized A disk does not contain a valid signature After you install a new disk the disk must be registered in the operating system see Dis
54. a mirror If you need extra unallocated space on a disk containing one of the mirrors remove a mirror Break a mirrored volume to get two independent simple volumes with initially identical content Copy or move a volume of one type as a volume of another type Change the type of a volume when copying or moving it For example you can copy the contents of a mirrored volume to a spanned volume Convert primary volumes to logical and vice versa Convert a primary volume to logical to create a fifth volume on a disk that currently has four primary volumes Convert basic disks to dynamic and vice versa Convert the existing basic disks to dynamic to achieve additional disk reliability for data storage Convert GPT disks to MBR and vice versa Change the partitioning scheme of your disk the way you need it Import foreign disks Make dynamic disks added from another machine accessible for the system Changing a disk status online to offline and vice versa Change a disk status to offline in order to protect it from unintentional use Disk cloning The Disk Cloning wizard lets you replace the old basic MBR disk with a new one without reinstalling operating systems and applications It transfers all the source disk data to a target disk The source disk volumes can be cloned to the target disk as is or resized automatically with respect to the target disk size Disk and volume management operations Experience the vast array of d
55. a primary volume can be used as the system or active volume that is a volume from which the machine or its Windows operating systems start On each basic GPT p 87 disk you can create up to 128 primary volumes The maximum volume size ona GPT disk is 16 exabytes Unlike basic GPT disks on each basic MBR p 88 disk you can create either up to four primary volumes or up to three primary volumes plus an unlimited number of logical volumes The maximum volume size on an MBR disk is 2 terabytes If you are not planning to use more than four volumes on the disk all volumes can be primary volumes Otherwise you can leave the active volume and the system volume as primary volumes and then create as many logical volumes as required If the disk already has four primary volumes and you need to create a fifth volume first convert one of the volumes but not the system or active volume to a logical volume as described in Converting a primary volume to logical p 33 and then create a new logical volume 3 3 Types of dynamic volumes The following are the types of dynamic volumes that are supported by Acronis Disk Director provided that they are supported by the operating system as shown in Dynamic volume types support p 13 Simple volume A volume p 92 that consists of disk space from a single dynamic disk p 84 Physically a simple volume can occupy more than one region of disk space which can be logically perceived a
56. all the basic disks 3 Inthe Searching Method window choose Fast recommended checks the beginning of each side of every cylinder of the selected disks It takes less time and should find all deleted volumes in most cases Complete checks every sector on the selected disks for file system It is more thorough and requires much more time to perform than the Fast method 4 Inthe Searching for deleted volumes window Acronis Recovery Expert scans all the selected hard disk drives for deleted volumes Once a deleted volume is found it will be displayed in the volume list The search will however continue until all the remaining disks are scanned If no volumes are found you will be asked to close the Recovery Expert The program can even find and display intersected volumes that is volumes that were created and deleted on the disk at different times Moreover every successive volume allocates space from the previously deleted volume but not at the beginning of it Only one of the intersected volumes can be recovered Unlike the automatic recovery mode you do not have to wait until the whole search is finished using the manual mode As soon as a located volume or multiple volumes are added to the list you can select them for immediate recovery Selecting a volume changes its status to Undeleted and enables the Next button The Recovered Volumes window displays the volumes to recover as a part of the hard disk volume str
57. an convert your disks using the same menu items though the operation now will be named Convert to basic System disk conversion The program does not require an operating system reboot after conversion of a basic disk that contains one or more boot volumes to dynamic if 1 There is a single Windows Vista or Windows 7 operating system installed on the disk 2 The machine runs this operating system Caution The conversion of a disk containing boot volumes takes a certain amount of time Any power loss unintentional turning off of the machine or accidental pressing of the Reset button during the procedure could result in bootability loss For machines where more than one operating system is installed the program ensures bootability of each of the operating systems 6 6 Disk conversion dynamic to basic You would want to convert dynamic disks back to basic ones if for example you want to start using an operating system your machine that does not support dynamic disks This operation is available only for a dynamic disk that is empty or contains only one or more simple volumes with each simple volume occupying a single region on the disk These volumes will become basic volumes To convert a dynamic disk to basic 1 Right click the dynamic disk you need to convert and then click Convert to basic You will receive a final warning about the dynamic disk being converted to basic You will be advised about the changes tha
58. annot boot normally or even on a non Windows system like Linux A bootable version of Acronis Disk Director is created with Acronis Bootable Media Builder p 49 To run Acronis Disk Director boot the machine from a bootable media and then select Acronis Disk Director While working under bootable media p 54 Acronis Disk Director can perform almost all the operations on any disks and volumes that can be performed under Windows 4 4 Acronis Disk Director main window The main window of Acronis Disk Director is your main working place with the product e y T lt i Airini Desk Directos 11 Connected to This Machine Local Cometas as ndm Qwindews7RTM Lo al acos E Yes o Ww Det manigemen fo af re SS xat cav Actions and tools me Capacity Free space Tyoe He site swta Uperetions Disk 1 MBR yr Rewer ved 3113 M0 7 217 MB Perey MIR NTS waits gt Local volume C 15 096 G8 2 000 CD mary MER ws ety QU Disk 2 MBR E j New Volume 18 00 8 15 91 GB drenar y MER ws eat W o zm Disk 3 MIR Nes vol EJ 16 00 UB 15 91 08 Prenar y MER ers eats A Disk 4 GPT g rabo 3969 9B Dk 5 GPT Im 1969 08 a 5 Dnk t GPT The main window of Acronis Disk Director 1 Menu The menu provides access to all the actions tools and settings of Acronis Disk Director 2 Toolbar The toolbar displays the current disk layout p 19 and lets you perform the following actions on pending operations
59. as 43 6 4 Diskconversion GPT to MBR etre etee tenete tre va k an a ka ERRAT eka kaka Pe ee RE else 44 6 5 Disk conversion basic to dynamic esses eene nennen k KAKA KE KE ener KAKA A KA 44 6 6 Disk conversion dynamic to basic sessi nnns 45 6 7 Changing a disk status online to offline kek kk KK KK 46 6 8 Changing a disk status offline to Onl N nennen nnne nnns 46 6 9 Importing foreign disks reet ida 47 6 10 Removing a missing disk eene eene k k keka KEKE KAKA KA KAKE KA KA KA KA KAKA A KA 47 6 11 Cleaning upa discuta Y UU eR Rave ee oun Ke k k a kane Beets 48 7 1 Acronis Bootable Media Builder 7 1 1 How to ereate bootabl in di ii oia 7 12 W rkiig U hderbootable medid xal s 5 ly niyen Hd lel iki e kurk keye kek de ekl ede ke er 7 2 Acronis Recovery Expert Acronis OS Selector NN 58 Dal A ern reae eei er E e navire eei rrr 58 8 12 Setting th boot menu irese ee e re en rr ee ne Led ee ede eve Eee ii 59 8 1 3 OTE eMe EHR EE 59 8 1 4 Editing operating System Sernis riiin ini a E E a RR N G 63 8 1 5 Detecting Operating system ede ier kaye A KRA iaa Len 65 8 1 6 Setting Acronis OS Selector Options ccccccsccsesscsssssesscsssscsscsscsecessessessesscsscsessessessesaesseecseseessessusaesaeseseess 65 8 1 7 Installing and using several operating systems on a single machine essere 67 8
60. ating system to work Examples of system folders for Windows operating systems are Program Files and Windows System volume The volume which contains files that are necessary for any of the installed Windows operating systems to start Examples of such files are Boot ini Ntdetect com and Ntldr If only one Windows operating system is installed on your machine the system volume is usually the same as the boot volume p 82 If more than one Windows operating system is installed on your machine each of these operating systems normally has its own boot volume whereas there is still only one system volume In terms of volume type the system volume can be a primary volume on a basic disk or a simple volume on a dynamic disk See also boot volume p 82 T Track Any one of the concentric circles to which a hard disk p 87 is divided Information from one track can be accessed without moving the magnetic head U Unallocated space Space on a disk that is available for creating a new volume or a part of it or for extending an existing volume Not to be confused with free space p 86 on a volume V Volume An independent area of storage on a hard disk p 87 Typically a volume contains a file system p 86 which is used to store files and folders A disk can store more than one volume Some volumes such as spanned volumes p 90 can reside on more than one disk Volume label An optional
61. by dragging the slider Click OK to add the pending volume splitting operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 9 Changing a volume label The volume label is a short name that you can assign to a volume to better differentiate it from other volumes In Acronis Disk Director the volume label is shown in the list of volumes and is followed by the drive letter if present for example System C Unlike the volume s drive letter which may be different in different Windows operating systems installed on the machine the volume label remains the same even after the hard disk drive with the volume has been moved to another machine The maximum length of a volume label depends on the volume s file system For example it is 32 characters for the NTFS file system 11 characters for the FAT16 and FAT32 file systems and 16 characters for the ext2 and ext3 file systems To change a volume label 1 Right click the volume whose label you want to change and then click Change label 2 In New label type the new volume label Note Some file systems for example FAT16 and FAT32 see below do not allow certain characters in the volume label The OK button will remain disabled as long as the label you
62. chine you need to initialize them that is to register disks in the operating system The newly detected disks appear in the disks and volumes list as Not initialized To initialize a disk or disks 1 Right click the newly added disk or any of newly added disks and then click Initialize 2 Inthe Disk Initialization window select the other not initialized disks if there are several and set the disk partitioning scheme MBR or GPT and the disk type basic or dynamic for every selected disk GPT partition scheme is not recognized by XP Home XP Professional x86 3 Click OK to add the pending disk initialization operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them After the initialization all the disk space remains unallocated and so still impossible to be used for program installation or file storage To be able to use it you need to either create a new volume see Creating a volume p 25 or to extend the existing volumes to the disk see Resizing a volume p 27 If you decide to change the disk settings it can be done later using Acronis Disk Director 11 6 2 Basic disk cloning This operation is available for basic MBR disks The cloning operation transfers all the source disk data
63. ct Use WinPE files located in the folder specify Specify the path to the folder where the WinPE files are located 4 optional Specify Windows drivers to be added to Windows PE Once you boot a machine into Windows PE the drivers can help you access the device where the backup archive is located Click Add and specify the path to the necessary inf file for a corresponding SCSI RAID SATA controller network adapter tape drive or other device You will have to repeat this procedure for each driver you want to be included in the resulting WinPE boot media Choose whether you want to create ISO or WIM image Specify the full path to the resulting image file including the file name Check your settings in the summary screen and click Proceed pono an Burn the ISO to CD or DVD using a third party tool or copy to a flash drive Once the machine boots into WinPE Acronis Disk Director starts automatically To create a PE image ISO file from the resulting WIM file replace the default boot wim file in your Windows PE folder with the newly created WIM file For the above example type copy c AcronisMedia wim c winpe_x86 1ISO sources boot wim use the Oscdimg tool For the above example type oscdimg n bc winpe_x86 etfsboot com c winpe_x86 ISO c winpe_x86 winpe_x86 iso For more information on customizing Windows PE see the Windows Preinstallation Environment User s Guide Winpe chm 7 1 2 Working under bootable
64. ctor boot record making Acronis OS Selector inoperable until it is reactivated from the Acronis OS Selector boot menu p 68 After Linux is installed Acronis OS Selector will automatically detect its presence and create a respective customizable icon in the Operating system area of the main program window 8 2 Acronis Disk Editor Acronis Disk Editor is a professional tool that performs a variety of actions on a hard disk with it you can restore boot records repair files and folder structure find lost clusters remove computer virus code from a disk and much more This program has much to offer to a computer novice as well For example it can be used as an educational tool Working with Acronis Disk Editor requires a thorough understanding of the hard disk structure file systems operating systems partitioning schemes and principles of data storage organization Complete instructions concerning the organization of data storage and the interaction of hard disks with operating systems and applications is not within the scope of these documentation When editing disks and volumes you should be certain of your actions You can easily violate a disk s information integrity by making data inaccessible Also your machine operability may be severely affected the operating system will stop loading applications will stop running In this section Starting work with Acronis Disk Editor l eker 73 Main window menu and contr
65. ctor is the ability to add almost any new operating system to a machine even if it already has one or more operating systems installed By using Acronis OS Selector a user is able to install Several different copies of the same operating system for example Windows 7 Different operating systems from the same developers for example Microsoft Windows Vista and Windows 7 Operating systems from various developers for example Windows and Linux In all cases Acronis OS Selector eliminates software conflicts that might affect operating system stability and even result in failures Acronis OS Selector supports and automatically recognizes the following operating systems Various DOS environments MS DOS 5 x 6 x MS DOS 7 0 not a separate product but is included in Windows 95 MS DOS 7 1 not a separate product but is included in Windows 98 MS DOS 8 0 not a separate product but is included in Windows Me All Windows operating systems Windows 95 98 Me NT 2000 XP Vista 7 The most popular Linux distributions The most popular Unix distributions FreeBSD Solaris QNX Below you will find instructions for some of the most typical situations related to adding a second operating system to a machine that already has one installed Please be aware that peculiarities of some operating systems may place additional limitations and or require additional actions Please note that a newly installed operating system will be se
66. d in the root installation directory You can always find the latest up to date list of the third party code and the associated license terms used with the Software and or Service at http kb acronis com content 7696 Table of contents 1 2 Introducing Acronis Disk Director 11 Home u kk nn eene nnne nnns KK KK KRA KAKA 5 Installation and upgrade 1 1 11i eren Ala 40 5 34534400043400 o au yk nh opua kso aan k SERA W 7 2 1 Hardwarereguilements tidad 7 2 2 Supported operating SystelTis iii sese rtt e caesa eo Te e Causa ver ce ee Fe k le dea ha dE REO dus 7 23 Supported file systems etn aiii 7 PI MEESVI Vic auct 8 2 5 Installing Acronis Disk Director cesses nennen nennen nnne KAKA KE KEKE KAKA KA KAKA KA KAKA KA 8 2 6 Installing Acronis OS Selector ciet Kad n ke kk ccs Kub n n kak cek toon Ie tu bcc WAN ek ced d ee Sn 8 2 7 Updating Acronis Disk Director esses nenne nennen enne nnn KAKE KA KAKA KA KAKA KA KA KA nn 9 2 8 Removing Acronis Disk Director i kk eke kk lek kk KE KAKA KAKA KEKE KAKA KA KAKA KA A KA KA 9 2 9 Upgrading Acronis Disk D F CtOF kek kk keka kk EKA KAKA KAKE A A KA HA KAKA KA A KA KA 9 2 10 Demo version informat On l ekere keke nnne nennen ennt en nennen snnt rennen nns 9 2 11 Technical SUPPONE nilo REN 10 Basic CONCEDES 11 31 Basic ANA AYNAMICIAIS
67. der is much faster than moving the head from one cylinder to another D Defragmentation The process of rearranging files on a volume to reduce fragmentation p 86 which may improve file access times Disk A storage device often a magnetic storage medium which is attached to a machine Examples of disks include hard disks and floppy disks Disk group A number of dynamic disks that store the common configuration data in their Logical Disk Manager LDM databases and therefore can be managed as a whole Normally all dynamic disks created within the same machine are members of the same disk group As soon as the first dynamic disk is created by the LDM or another disk management tool the disk group name can be found in the registry key HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services dmio Boot Info Primary Disk Group Name The next created or imported disks are added to the same disk group The group exists as long as at least one of its members exists Once the last dynamic disk is disconnected or converted to basic the group is discontinued though its name is kept in the above registry key In case a dynamic disk is created or connected again a disk group with an incremental name is created When moved to another machine a disk group is considered as foreign p 86 and cannot be used until imported into the existing disk group The import updates the configuration data on both the local and the foreign disks so that
68. ding disk cloning operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them Using advanced options When cloning a disk containing the system volume you need to retain operating system bootability on the target disk volume by copying the original disk s NT signature The NT signature is a record that is kept in the disk s master boot record and uniquely identifies the disk For the operating system to remain bootable the target disk must have the same NT signature as the source disk Important Two disks with the same NT signature cannot work properly under one operating system After cloning the disk and copying the NT signature you should remove one of the disks from the machine You have the following two alternatives to retain system bootability on the target disk volume Copy NT signature to provide the target disk with the source disk NT signature matched with the Registry keys also copied on the target disk Leave NT signature to keep the old target disk signature and update the operating system according to the signature If you need to copy the NT signature 1 Select the Copy NT signature check box You receive the warning stating that you will have to remove one of the two hard disk drives from
69. disk can store one or more volumes p 92 which are called basic volumes A basic disk can be converted to a dynamic disk Basic volume A volume on a basic disk p 81 A basic volume can be primary p 90 and logical p 87 Block See Sector p 90 Boot sector The first sector p 90 of a disk p 83 or a volume p 92 that contains the initial code to start the operating system The boot sector must end with a hexadecimal signature of OxAA55 Boot volume The volume which contains files that are necessary for a particular Windows operating system to start and work If only one Windows operating system is installed on your machine the boot volume is usually the same as the system volume p 91 If more than one Windows operating system is installed on your machine each of these operating systems normally has its own boot volume whereas there is still only one system volume In terms of volume type a boot volume can be a primary or logical volume on a basic disk or a simple volume on a dynamic disk See also system volume p 91 Bootable media A physical media CD DVD USB flash drive or other media supported by a machine BIOS as a boot device that contains a bootable version of Acronis Disk Director or Windows Preinstallation Environment WinPE with the Acronis Plug in for WinPE A machine can also be booted into the above environments using the network boot from Acronis PXE Server or Microsoft R
70. e if you need the machine to start from this volume Logical Set the volume as Logical if it is intended for data storage 6 Click Finish to add the pending volume creation operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 2 Resizing a volume This operation extends a volume whether basic or dynamic by taking unallocated space from one or more disks or reduces a volume so that a portion of the volume s free space becomes unallocated space Extending a basic volume A basic volume occupies a single region on a single basic disk When you extend a basic volume you can choose to leave the disk as basic and use only the unallocated space that is adjacent to the volume Alternatively you can choose to convert the disk to dynamic and use unallocated space from all dynamic disks on your machine In the second case the volume will become a simple or spanned volume Resizing a volume from which the machine or an operating system starts You can resize the system volume a boot volume or the active volume only when it is a basic volume To resize a volume 1 Select the volume that you want to resize and then click Resize volume 2 Specify the new size of the volume by typing it or by moving the slider 3
71. e disk s physical sectors If the volume clusters are aligned with sectors this volume and all following volumes are also aligned If clusters are not aligned with sectors the volumes are misaligned Misalignment decreases the overall system performance and hardware lifetime When misalignment occurs Volume misalignment occurs when you create a volume on a modern HDD or SSD drive that has a 4 KB sector size using a Windows operating systems earlier than Vista 15 Copyright Acronis Inc 2000 2010 What is the cause of misalignment All Windows operating systems earlier than Vista use a factor of 512 bytes to create volume clusters The volume start is aligned to 512 byte sectors Also these operating systems use the Cylinder Head Sector CHS addressing scheme Volumes created with this scheme are aligned by cylinders tracks of the disk Usually a track consists of 63 physical sectors Since the first track is reserved for the master boot record MBR and other service purposes the first volume starts from the beginning of the second track of the disk Therefore volumes aligned by 63 sectors are not aligned with 4 KB sectors 63 sectors by 512 bytes do not match with the integer number of 4 KB sectors Thus the first created volume and all of the following volumes on the hard disk drive will be misaligned Why misalignment is an important issue for hard disk drives When a single bit of data is changed the operating system entire
72. e filtering entries to a file criteria 2 Click A Save All to File 3 In the opened window specify a path and a name for the file As a result the log entries of that list will be saved Delete all the log entries Click A Clear Log All the log entries will be deleted from the log and a new log entry will be created It will contain information about who deleted the entries and when 4 8 2 Filtering and sorting log entries The following is a guideline for you to filter and sort log entries To Do Display log entries fora 1 In the From field select the date starting from which to display the log given time period entries 2 Inthe To field select the date up to which to display the log entries Filter log entries by Type the required value owner name code number in the field below the owner and code respective column header As a result you will see that the list of log entries fully or just partly coincide with the entered value Filter log entries by type Press or release the following toolbar buttons o to filter error messages A to filter warning messages O to filter information messages Sort log entries by date Click the column s header to sort the log entries in ascending order Click it and time type message once again to sort the log entries in descending order Configuring the log table By default the table has three columns that are displayed the others are hidden If required you can hide the shown colu
73. e system volume p 91 and a boot volume p 82 A mirrored volume is sometimes called a RAID 1 volume Note No redundancy provided by the dynamic volumes architecture can replace the proper backup procedure If you want to be sure of the safety of your data the best policy is to combine both precautions 3 4 Active system and boot volumes Some volumes on the disks of your machine contain information that is necessary for the machine to start and for a particular operating system to run Each such volume is called active system or boot depending on its function If only one Windows operating system is installed on your machine a single volume is often the active system and boot volume at the same time Because of their special role you should use extra caution when performing operations with these volumes Some operations with these volumes have limitations as compared to ordinary volumes Active volume This is the volume from which the machine starts after you switch it on The active volume usually contains one of the following programs The operating system A program that enables you to choose which operating system to run if more than one is installed such as GRUB A diagnostic or recovery tool that runs before the operating system such as Acronis Startup Recovery Manager In Acronis Disk Director the active volume is marked with a flag like icon F If you choose to run a Windows operating system
74. e volume for example as a security best practice When you want to change the volume s file system to later store files more efficiently To format a volume 1 Right click the volume that you want to format and then click Format 2 In File system select the file system that you want to create on the volume The NTFS file system is recommended for most Windows operating systems Note The FAT16 and FAT32 file systems can be created on a volume of up to 2 GB and up to 2 TB in size respectively For the list of supported file systems see Supported file systems p 7 3 In Cluster size specify the cluster size also known as allocation unit size for the file system We recommend leaving the default size which is marked in the list as default For more information on choosing the cluster size see More about cluster sizes later in this section 4 Optionally in Volume label type the volume label that you want to assign to the volume to better differentiate it from other volumes The maximum number of characters in the volume label depends on the file system that you selected see Changing a volume label p 32 5 Click OK to add the pending volume formatting operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effec
75. emote Installation Service RIS These servers with uploaded bootable components can also be thought of as a kind of bootable media Bootable media is most often used to create basic or dynamic volumes on bare metal Booting The process of starting a machine when the machine is turned on or reset When the machine boots its hardware runs a program known as a boot loader which in turn starts the selected operating system A machine that cannot boot normally for example because a volume with the operating system is not available is called unbootable Some operations such as resizing the system volume in Windows require rebooting the machine C Cluster The unit of disk space allocation to store files in a file system Each non empty file completely occupies one or more clusters The typical size of a cluster is 4 KB When formatting a volume you can choose the cluster size for it Smaller cluster sizes allow for more efficient storage of smaller files by reducing the amount of wasted disk space but larger files may become more fragmented across the volume which may increase the amount of time that is needed to access them A cluster is also known as an allocation unit Physically a cluster is one or more usually eight sectors on a disk Cylinder A group of all tracks p 92 on all magnetic platters of a hard disk p 87 that can be accessed without moving the magnetic head Access to the data inside one cylin
76. er that requires the BCD configuration file The main part of Windows operating system is located in Windows or WINNT Program Files Documents and settings or Users system folders that might be stored on any hard disk volume or even disk while the bootable part is required to be located on the first hard disk primary volume The disk has to be the first according to BIOS This may vary from the enumeration that several operating systems provide If there are several disks in the machine you can see their enumeration in the Acronis Disk Director main window p 17 The first disk in the system is numbered 1 Due to the location limitations of the bootable part you can avoid problems with Windows only if you follow the installation sequence according to which older operating systems are to be installed first Windows 2000 Professional gt Windows XP gt Windows Vista gt Windows 7 This operating system installation sequence solves boot problems Otherwise boot files of a newer OS will be damaged by those of an older version of Windows that knows nothing of its subsequent versions Acronis OS Selector breaks this limitation and eliminates the need to worry about the Windows installation sequence Installing another Windows OS on a separate volume 1 Prepare a free primary volume for the new Windows system You can do this by using unallocated space For volume creation instructions see Creating a volume p 25 If there is no u
77. erating system in the following ways Clicking Create shortcut in the Edit sidebar section main window toolbar or boot menu Clicking Create Shortcut in the Edit section of the main menu Clicking Create Shortcut on the toolbar Using a context menu invoked by a right click 8 1 4 3 Deleting operating systems from the OS Selector boot menu With the Delete operation you can delete any operating system from the OS Selector boot menu and main window along with its shortcuts You can delete all Windows system folders from the hard disk and at the same time delete Windows from the boot menu by selecting the Delete the operating system directories check box in the Confirmation dialog window 8 1 4 4 Renaming operating systems Acronis OS Selector users can assign any name to operating systems or their shortcuts That can be done by clicking Rename on the sidebar toolbar main menu or context menu 8 1 4 5 Copying operating systems Acronis OS Selector allows you to duplicate any installed operating system or its shortcut It might be useful if you want to test unknown software before installing it on the main OS Copying an operating system implies duplicating all its system files and folders and configuration files as well as all programs installed into a separate folder located inside the hidden BOOTWIZ system folder see Acronis OS Selector installation p 8 Copying can take a long time so you will be prompted to conf
78. ering cylinder head and sector numbers The listed parameters are bound by this expression CYL x HDS HD x SPT SEC 1 where CYL HD and SEC are cylinder head and sector numbers in the CHS coordinates Cylinder Head Sector HDS is the number of heads per disk and SPT is the number of heads per track You can return to a sector from another one by selecting the Back item in the Search menu or by pressing the Ctrl B key combination 8 2 6 Usage examples This section describes how to use Acronis Disk Editor for the most common scenarios 8 2 6 1 Protecting and restoring MBR This example applies to basic disks whose partitioning scheme is MBR The master boot record MBR is located in the first sector of the hard disk and stores information about the hard disk partitioning and code that is loaded with BIOS Information stored in the MBR is crucial for the machine booting If the MBR code is corrupted due to boot sector viruses or human error the machine becomes unbootable and you cannot access the data stored on the hard disks By having the MBR code copy saved in a safe place you will protect your machine against such disasters Even if your machine fails to boot normally you can boot it by using bootable media created with Acronis Bootable Media Builder p 49 Under bootable media you can start Acronis Disk Editor and restore the MBR from a previously saved copy Thus the machine bootability will be completely re
79. ffline and missing back online please refer to the following Microsoft knowledge base article http technet microsoft com en us library cc732026 aspx 6 8 Changing a disk status offline to online Effective for Windows Vista SP1 Windows 7 operating systems and applies to the current disk layout p 19 The offline status means that a dynamic disk is accessible in the read only mode You may need to change an offline disk to online to make the disk that you switched to offline previously fully accessed To make a disk online 1 Right click the offline disk and then click Change status to online 2 Inthe appearing window click OK to confirm the operation If the dynamic disk has the offline status and the disk s name is Missing this means that the disk cannot be located or identified by the operating system It may be corrupted disconnected or powered off For information on how to bring a disk that is offline and missing back online please refer to the following Microsoft knowledge base article http technet microsoft com en us library cc732026 aspx 6 9 Importing foreign disks On a machine with two or more operating systems representation of disks and volumes depends on which operating system is currently running Normally all dynamic disks created within the same machine and operating system are members of the same disk group When moved to another machine or added to another operating system on the same machine
80. g System Selection window Under bootable media this window appears immediately after Acronis Disk Director is launched The disk layout will be displayed according to the operating system you select 4 7 Performing operations In Acronis Disk Director all operations on disks and volumes are performed in the same way To perform any operation 1 Do any of the following Click the disk or the volume and then select the required action in the Actions menu m Click the disk or the volume and then select the required action on the Actions pane Right click the disk or volume and select the required action in the context menu Note the list of available actions in the Actions menu the context menu and the Actions pane depends on the selected volume or disk type The same also applies to unallocated space 2 Youwill be forwarded to the operation specific window or the wizard page where you have to specify the operation s settings 3 Click OK The operation will not be performed immediately but will be considered pending p 20 and added to the pending operation list You can prepare a sequence of operations to be performed on disks and volumes All pending operations will be performed only after you commit them Nevertheless the results of any pending disk or volume operation are immediately displayed in the product main window For example if you create a volume it will be immediately shown in the table view at t
81. g in the As Hex view mode Selecting data Any view mode lets you select blocks of disk sectors with the mouse or with the keyboard In the Hex view mode use the following to select blocks With a mouse Place the mouse pointer at the necessary sector byte and drag it to create a block selection around the outside of all the bytes that you want to select With a keyboard Place the cursor at the necessary sector byte Press and hold the Shift key and use the arrow keys or Page Up and Page Down keys to create a selection Hint Pressing the End key while holding the Shift selects the entire disk sector To select all the disk sectors press CtrI A Editing disk data Point the cursor to the block that you need to edit in the hexadecimal or character area in the main window Then enter the required value In other view modes you should edit values in the appropriate fields Use the Undo menu item to discard the last one or more changes Undo all discards all the changes you made Saving your changes The changes you made will not be applied to the given disk sector immediately Be sure to click Save sector for changes to take effect Attention After saving changes you will not be able to undo them If you do not save your changes you effectively reject them If you have made changes in a hard disk sector and decide to exit the editor without saving them you will see a warning prompting you to save your changes
82. g operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 8 Splitting a basic volume This operation splits a basic volume in two by using a portion of the volume s free space to create another basic volume When splitting a basic volume you can move some files and folders from it to the new volume The original basic volume will retain its type primary or logical volume letter and volume label The new basic volume Will be a logical volume Will be assigned the first available volume letter Will have the same volume label as the original volume Free space requirements The original volume needs to have at least 16 MB of free space The required space will be available again as soon as splitting is finished Caution Volumes that contain encrypted files cannot be split To split a basic volume 1 Right click the basic volume that you need to split and then click Split volume 2 To move some files and folders from the original volume to the new volume select the Move selected files to created volume check box then click Select and then select the files and folders that you want to move Caution When splitting a boot volume avoid moving system folders such as Windows or Program Files Otherwise the corresponding Windows operating system will likely fail to start 3 Specify the size of the new volume by typing it or
83. h as Acronis True Image Home installed on your machine you can also include bootable versions of these programs on the same bootable media Linux based bootable media Linux based media contains bootable version of Acronis Disk Director based on Linux kernel It can boot and perform operations on any PC compatible hardware including bare metal and machines with corrupted or non supported file systems PE based bootable media PE based bootable media contains a minimal Windows system called Windows Preinstallation Environment WinPE and Acronis Plug in for WinPE that is a modification of Acronis Disk Director that can run in the preinstallation environment WinPE proved to be the most convenient bootable solution in large environments with heterogeneous hardware Advantages Using Acronis Disk Director in Windows Preinstallation Environment provides more functionality than using Linux based bootable media Having booted PC compatible hardware into WinPE you can use not only Acronis Disk Director but also PE commands and scripts and other plug ins you ve added to the PE PE based bootable media helps overcome some Linux related bootable media issues such as support for certain RAID controllers or certain levels of RAID arrays only Media based on PE 2 x or PE 3 0 allows for dynamic loading of the necessary device drivers 7 1 1 How to create bootable media To enable creating physical media the machine must have a CD DVD record
84. he top as well as in the graphical view at the bottom Any volume changes including changing the volume letter or label are also immediately displayed While an operation is pending it can be easily undone and redone see Undoing pending operations p 21 4 7 1 Pending operations Almost all the operations are considered pending before you commit them Until then Acronis Disk Director will only demonstrate the new volume structure that will result from the operations planned to be performed on disks and volumes This approach enables you to control all planned operations double check the intended changes and if necessary undo operations before they are executed All pending operations are added to the pending operations list that can be viewed in the Pending operations window To view and commit pending operations 1 Onthe toolbar click Commit pending operations 2 Inthe Pending operations window view and examine the list of pending operations 3 Click Proceed to execute the operations You will not be able to undo any operations after you choose to proceed the operation To quit the Pending operations window without committing click Cancel If you try to exit Acronis Disk Director while there are pending operations that are not yet committed you will be asked whether you want to commit them Quitting the program without committing the pending operations effectively cancels them 4 7 2 _ Undoing pending operations Any
85. his parameter This parameter allows you to use some USB drives in the USB 1 1 mode if they do not work in the USB 2 0 mode nodma Disables direct memory access DMA for all IDE hard disk drives Prevents the kernel from freezing on some hardware nofw Disables the FireWire IEEE1394 interface support nopcmcia Disables detection of PCMCIA hardware nomouse Disables mouse support module_name off Disables the module whose name is given by module_name For example to disable the use of the SATA module specify sata_sis off pci bios Forces the use of PCI BIOS instead of accessing the hardware device directly You may want to use this parameter if the machine has a non standard PCI host bridge pci nobios Disables the use of PCI BIOS only direct hardware access methods will be allowed You may want to use this parameter when the bootable media fails to start which may be caused by the BIOS pci biosirq Uses PCI BIOS calls to get the interrupt routing table You may want to use this parameter if the kernel is unable to allocate interrupt requests IRQs or discover secondary PCI buses on the motherboard These calls might not work properly on some machines But this may be the only way to get the interrupt routing table 7 1 1 2 Adding the Acronis Plug in to WinPE 2 x or 3 0 Bootable Media Builder provides three methods of integrating Acronis Disk Director with WinPE 2 x or 3 0 Adding the Acronis Plug in to the existing
86. i ct tetro or k va sade w n ae abate edad ew neka na w Ren iraia eas 35 5 15 Adding MIO Ria A A metet ee een e eret 35 5 16 REMOVING a mi OC i E k vukke s k Aka Y d B ken RR ER vk en Rn Re Pe ee ERE Ye vete 36 5 17 Breaking a Mirrored volume yA isal di ki ly lae kel seren kir nnne EV Ve yaya b si veye k Kn kwe a ba a kd 36 5 18 Browsing a volume S COtent li keke kek ke kk k KA KEKE KEKE KA KAKA KEKE KA A KA HA KAKA KA KA 37 5 19 Checking a volume for CLrOKs cceecessececececsesesssaeeececesessesneaeeeeeceseesesaeaeeeesessecsnsasaeeeeeeeseeseaaeas 37 5 20 Defragmenting a volume voi ir ia add rek e sua ta oes dans KERA 37 5 21 Changing a cl ster size iit ee ttc lieet editt dad ea kan kn k 38 5 22 Changing a tile syto 38 5 23 Hiding a VOLUME xin Pa WIRE dee enn mu mies 39 5 24 Unhiding a volume RT ees Wa u kr RU lw ak W en dn abe 39 5 25 Specifying i node density s d xan kk kk k kalek dee ka Kur Hela w aaa a ay Wer dan dka Ku W HOZ W w t La Wes kana keban 40 6 DISK OPEratiONns 3 asya iii eei Lone eda co kiy ye Sena AVA epu e Ke xe WW Kn xew VE KWA WARE S W ke Weber ex ne RRA w kan 41 6 1 Disk initializ tlOlhk ii irem nante iras dep ka A QERE Me Q 41 6 27 Basic disk cloning iii Re Ten en Un au nii 41 6 3 Diskconversion MBR to GPT c ceessseesseceececeecceeesneeesaeceeaaecsaeesnaeeeeaaeceeaaessaeeesaaeceeaaesenaeeen
87. ically determine the location of the system folders you will have to provide the information manually System folders might be located on 1 Any physical hard disks shown in the list 2 Any media unsupported by BIOS 8 1 7 3 Installing Linux and Windows on the same machine The Linux operating system is a modern reliable and high performance platform for both business and home users Since its popularity is growing many Windows users are choosing to sample Linux however not all of them are willing to change operating systems completely or have a second machine on which to install Linux The preferred option is to run Windows and Linux on a single machine Linux peculiarities From the perspective of bootup Linux like Windows has two parts A loader that loads the Linux core into memory and passes it the controls The main part of the operating system The most popular Linux loaders are LILO and GRUB The main part of Linux is usually installed to an Ext2 Ext3 or ReiserFS file system volume that can either be primary or logical and can be located on any hard disk This operating system needs another volume for its virtual memory Linux Swap The Linux core is located in a file which must be loaded into memory Instead of supporting multiple file systems LILO developers took a simpler more universal route a loader just keeps the core file location in its data structure created by the special activator program lilo
88. ing drive or allow a flash drive to be attached Bootable Media Builder can also create an ISO image of a bootable disk to burn it later on a blank disk Linux based bootable media Start the Bootable Media Builder either from the management console by selecting Tools Create Bootable Media or as a separate component 1 In the Bootable media type choose Linux based 2 Select the way volumes and network resources will be handled called the media style A media with Linux like style volume handling displays the volumes as for example hda1 and sdb2 It tries to reconstruct MD devices and logical LVM volumes before starting a recovery A media with Windows like style volume handling displays the volumes as for example C and D It provides access to dynamic LDM volumes 3 The wizard will guide you through the necessary operations Please refer to Linux based bootable media p 51 for details PE based bootable media Acronis Plug in for WinPE can be added to WinPE distributions based on any of the following kernels Windows Vista PE 2 0 Windows Vista SP1 and Windows Server 2008 PE 2 1 Windows 7 PE 3 0 To be able to create or modify PE 2 x or 3 0 images install Bootable Media Builder on a machine where Windows Automated Installation Kit AIK is installed The remaining operations are described in the Adding the Acronis Plug in to WinPE 2 x or 3 0 p 53 section If you do not have a machine with WAIK
89. ing system For information on how to select the disk layout see Disk layout p 19 Caution Avoid changing the drive letter of a boot volume Otherwise the corresponding Windows operating system or some of the installed programs might fail to work normally To change a drive letter 1 Right click the volume whose drive letter you want to change and then click Change letter 2 Select a new drive letter from the list of available ones To leave the volume without a drive letter click Do not assign a letter 3 Click OK to add the pending drive letter changing operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 11 Converting a primary volume to logical This operation applies to basic disks whose partitioning scheme is MBR It converts a primary volume on such disk to a logical volume Each basic MBR disk can have either up to four primary volumes or up to three primary volumes plus an unlimited number of logical volumes You need to convert a primary volume to logical if you want to later create a fifth volume on a disk that currently has four primary volumes The size of the converted volume might differ slightly from that of the original primary volume because some space might be required to store
90. ion system already installed may prevent that system from loading Folders Acronis OS Selector automatically determines system folders for all Windows operating systems System folders contain files required for an operating system to work properly Windows 2000 XP utilizes Windows Program Files and Documents and Settings folders while Windows 7 uses Program Data Users and other folders For other operating systems for example Linux you will have to specify system folders manually by using the Add button If needed you can edit the list by using the Remove button Under other operating systems for example Linux you can add folders to the system folders list only if the host volumes are FAT16 32 or NTFS Each folder in the list has its Properties section which with the help of the Enable Disable parameter allows you to specify if the folder contents are to be restored at operating system bootup This can help avoid conflicts among multiple operating systems making them invisible to each other For example you will have to enable system folders recovery when installing another Windows on a volume where one Windows operating system is already installed see Installing another Windows on the same volume p 69 When you copy an operating system using the Acronis OS Selector Copy feature the recovery option enables automatically Enable enable folder contents recovery at bootup Disable leave folder contents
91. ions available for selected operating systems or their shortcuts see Using shortcuts p 64 Boot boots the selected operating system or its configuration shortcut Set Default sets the default operating system Set password protects the selected operating system with a password Properties sets properties of the selected operating system Edit This section provides the following means of operating system and shortcut management Hide hides a selected operating system or shortcut from the boot menu Create Shortcut creates a shortcut for a selected operating system Delete deletes a selected operating system or shortcut Rename renames a selected operating system or shortcut Copy duplicates a selected operating system or shortcut Tools Activate OS Selector select to always display the Acronis OS Selector boot menu at bootup Deactivate OS Selector select to always boot up the specified operating system OS Detection Wizard invokes OS Detection Wizard for detecting deleted or not determined automatically operating systems Options sets Acronis OS Selector options Details This section provides brief context help on the selected operating system or its shortcut 8 1 2 Setting the boot menu After Acronis OS Selector is installed the boot menu is automatically activated If your CD DVD drive is set as the first bootup device in BIOS a bootable CD DVD inside the d
92. irm that you want to perform the task To copy an operating system 1 Select an operating system in the boot menu or program main window 2 Click Copy in the Edit sidebar section or select a respective item in the main menu or context menu After this you will see a copy of this operating system in the Operating systems window with a number automatically appended to its name depending on the number of copies already made If needed you can rename a copy by clicking Rename in the Edit sidebar section or selecting a respective item in the main menu or context menu 8 1 5 Detecting operating systems The OS detection tool allows an operating system that has been unintentionally deleted from the boot menu to be found and added to the Acronis OS Selector boot menu and main window Besides if an operating system on a newly connected disk was not detected automatically you can try to add it to the boot menu using this tool A deleted Windows operating system cannot be detected if its system folders have been deleted from the hard disk A deleted Linux system cannot be detected if its loader was located in the master boot record MBR To run the OS Detection Wizard 1 Select the OS Detection Wizard from the Tools menu 2 Select whether you want to detect an operating system on the hard disk on CD or to detect its record in the MBR 3 If you selected the hard disk select the partition where the operating system to be exact its bo
93. isk To ensure proper volume alignment and normal access to volumes on this disk perform the following steps 1 Create a bootable media with Acronis Disk Director see How to create bootable media p 50 2 Run Acronis Disk Director from a bootable media see Running Acronis Disk Director p 16 3 Select the Bootable media OS disk layout see Disk layout p 19 4 Create volumes see Creating a volume p 25 If Windows 7 or Windows Vista is installed in addition to Windows XP select the disk layout of either of those operating systems After the volumes are created you can perform other operations with them including changing their size under any disk layout How to fix volume misalignment using Acronis Disk Director Suppose that you have already created basic volumes on a disk with a 4 KB sector size using Windows XP Volumes already contain data To align the misaligned volumes on the disk using Acronis Disk Director clone this disk to another and then clone it back see Disk cloning p 41 After cloning Acronis Disk Director shifts the first volume start with 1MB offset all the disk volumes will be aligned properly 4 Getting started After reading this section you will know how to run and use Acronis Disk Director what precautions you should take and how to perform the most common tasks you might need In this section PE CAUTIONS gt coin Keno aren ENE Y 16 User privil X l _lha _ _r_ ainai nn
94. isk and volume management operations Resize move copy split and merge volumes without data loss or destruction Format and label volumes assign volume letters and set volumes active Initialize newly added hard disks Delete volumes New Change file systems New Clean up disks New Hide unhide volumes New Specify i node density New Change a cluster size Explore volume data even on Linux volumes before performing operations Preview changes made in disk and volume layout before applying them Browse through the detailed information about all hard disks volumes and file systems Acronis Recovery Expert Helps you to recover accidentally lost or deleted volumes on basic MBR disks Acronis Bootable Media Builder Now you can create bootable media based both on WinPE and Linux to use Acronis Disk Director on bare metal or outside of an operating system Acronis OS Selector Easy to use boot manager that allows several operating systems on a single machine and lets you create different configurations for any installed operating system including Windows 7 New Acronis Disk Editor A professional tool that performs a variety of actions on a hard disk Log Examine information about disk and volume operations including reasons for failure if any For the operating systems that support such functionality 2 Installation and upgrade This section answers questions that might arise before
95. it to Acronis Disk Director 11 1 Remove Acronis Disk Director 10 from your machine 2 Follow the on screen instructions as described in Installing Acronis Disk Director p 8 Upgrading from the demo version of Acronis Disk Director 11 If you already have the demo version p 9 of Acronis Disk Director 11 installed and want to upgrade it to a full version 1 Run Acronis Disk Director 2 Select Help gt Enter license key from the top menu and then type in your license key for Acronis Disk Director 2 10 Demo version information The demo version of Acronis Disk Director is fully functional except for the following limitations All volume operations can be performed on volumes whose initial and resulting size is not larger than 100 MB Operations on volumes whose size is larger than 100 MB cannot be committed The following disk operations can be committed only if the total size of all volumes on the disk is not larger than 100 MB MBR to GPT p 43 and vice versa p 44 disk conversion Basic to dynamic p 44 and vice versa p 45 disk conversion Clone basic disk p 41 2 11 Technical Support Maintenance and Support Program If you need assistance with your Acronis product please go to http www acronis com support Product Updates You can download the latest updates for all your registered Acronis software products from our website at any time after logging into your Account https www acronis co
96. itch to the Hex view mode 10 Place the cursor at the very beginning of the first sector byte Absolute sector 0 or 0000 in Hex and then click Read from file 11 In the Read from file window click Browse and specify the file storing the MBR code 12 Click OK The file content will be inserted into a sector from the current cursor position 13 Press the Ctrl S key combination to save changes 14 Reboot the machine 8 2 6 3 Wiping disk data Hard disks can contain a substantial amount of confidential information Often users forget that private information must be completely destroyed to avoid unauthorized access to it Simply deleting an old file is not sufficient Windows tools do not guarantee data destruction Deleted files can be restored easily Formatting and even deleting a partition leaves hard disk sector contents the same Acronis Disk Editor can be used as a simple and reliable tool for complete wiping hard disk data To wipe disk data 1 In Acronis Disk Director right click the disk whose data you need to destroy and then click Edit 2 In Acronis Disk Editor press the F2 key to switch to the Hex view mode 3 Place the cursor at the very beginning of the first sector byte Absolute sector 0 or 0000 in Hex Then press the Shift Ctrl End key combination to select the rest of the disk sectors 4 Click Fill and enter the 0 zero fill value 5 Click OK and then confirm the operation Be careful After you co
97. k initialization p 41 Only then you can create volumes on that disk To find out more information about disk statuses please refer to the Disk status descriptions article on the Microsoft website Important For instructions explaining how to repair disks with an Online Errors Offline or Missing status please refer to the Troubleshooting Disk Management article on the Microsoft website 4 5 2 Volume statuses Check a volume status to make sure the volume is accessible and works without problems Volume statuses appear both in the table and graphical panel Here are brief descriptions of the most common volume statuses Healthy A basic or dynamic volume is accessible and functioning correctly This is the normal volume status The Healthy status often has a number of substatuses that are displayed in the table view in parentheses and in the graphical view below the volume size and separated by a semicolon The System Boot and Active substatuses are the most common and described in the Active system and boot volumes p 13 section The healthy volume whose file system is corrupted is marked with the following icon a Failed A dynamic volume striped or spanned cannot be started automatically or one of the underlying disks is missing Failed Redundancy The data on a mirrored volume is no longer fault tolerant because one of the dynamic disks is not online You can access the volume until the remaining dynamic
98. k management applications that use this disk volume and start again If you cannot determine which applications use the disk volume close them all In this section Creating a VOlUM ER 25 Resizing a VOIUM EC kl kucilyy ke a iiien a kek Nak ha A n d a kaban enne tina e RR 34 an 27 Copying a VO U I xi sl kai i kasek sada kak k na knk n k j ka H a k sd W W RAA A H ieni 28 Moving a VOUM CL asil k n eerror i e nan mensen bal ka h da n ke Ra k n H M can ke RRA A hakan 28 Merging basic volumes Ei eke kek kek keke kk kk ke KA KAKA A KAK KK KA 30 Formatting a VO UT i 3 c ls 82 a iteco kab n ka nennen nnns ases WARE 30 Deleting VO U Biden dada 31 Splitting a basic volume 4 kek kk k k k k kK KK KA KAR 31 Changing a volume label sees 32 Changing a drive letter esses eene nnne nnn nn 33 Converting a primary volume to logical 33 Converting a logical volume to primary eene 34 Changing a partition type eene nnne nnn nns 34 Setting a volume act V uEE Eek eene nnne KA ARA 35 Adding a Mir eiie otro ome ea etn dene Potete kutek re bur Neken dee Sees 35 Removing mil tOF osos ince tee toe dese uode RAA eoo esta eode tur ue enia Got e puo ees 36 Breaking a Mirrored volume coccccncnonononnnnnoncnnnononononnnnncnnnnnonnnnonnnnnnnnnnnnos 36 Browsi
99. lets you organize disk space in the optimal way I node density is determined by specifying the number of bytes per i node Usually the default value is 4096 bytes per i node Important If you change the i node density of a boot volume the operating system will become unbootable To restore the system bootability use a boot loader To specify i node density 1 Right click the Ext2 Ext3 volume and then click Change i node density 2 In Bytes per i node specify the required value u Use lower i node density that is increased Bytes per i node value for a volume that contains just a few large files This will allocate more space for files and less for i nodes The less i nodes there are the in the system the faster the file system check operation will be performed Use higher i node density that is reduced Bytes per i node value for volumes that contain a large number of small files This will allocate more space for i nodes and less for data The more i nodes there are in the file system the less likely you will not run of i nodes But the file system check operation will be performed slower 3 Click OK to add the pending i node density changing operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them
100. lume check If the volume contains a very large number of files for example millions the check can take a long time to complete The results of the operation will be displayed in a separate window Note If the volume is in use the tool can only check it for errors but cannot repair them The checking and fixing of errors on this volume will be performed the next time you restart the system 5 20 Defragmenting a volume This operation is enabled in Windows operating systems and is disabled under bootable media Defragmentation increases the system performance by consolidating fragmented files on a volume Fragmentation occurs when the operating system cannot allocate enough contiguous space to store a complete file as a unit and thus writes different pieces of a file in gaps between other files The defragmentation rearranges pieces of each file as close together and contiguously as possible minimizing the time required to access it Acronis Disk Director does not perform defragmentation itself rather it launches the Disk Defragmenter tool Defrag exe included in Windows operating system To defragment a volume 1 Right click the volume you need to defragment and then click Defragment 2 Inthe Defragmentation window click OK to start defragmenting the volume Depending on the amount of fragmented files the defragmentation may take a long time to complete The results will be displayed in a separate window 5 21 Changing
101. ly overwrites the cluster that contains the changed data But if misalignment occurs the cluster will overlap more physical sectors than it would have occupied if aligned As a result more physical sectors need to be erased and rewritten each time data changes The redundant read write operations noticeably slow down the disk speed and overall system performance The same is true for SSD drives that have a 4 KB or larger sector memory page size For SSD drives misalignment decreases not only system performance but also drive lifetime SSD memory cells are designed for a certain amount of read write operations Therefore redundant read write operations lead to early degradation of the SSD drive How to avoid volume misalignment The latest operating systems starting from Windows Vista already support the new sector size Thus volumes created with these operating systems will be properly aligned Many hard disk drive manufacturers supply their modern drives with controllers that can shift addressing offset to one sector 63 sector becomes 64 sector so volumes will appear aligned How to work with 4 KB sector size disks using Acronis Disk Director Suppose that you added a new 4 KB sector size hard disk drive with to a machine that is running Windows XP only There are no volumes on this drive yet If you start creating volumes on this disk using Windows XP you may experience some slowdown of the system performance while accessing the d
102. ly to the boot volumes on the disk To include these volumes select the Use free space on boot volumes check box 4 Examine how the resized volume will be located on the disk or disks by using the preview area at the bottom of the window 5 Click OK to add the pending volume resizing operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 3 Copying a volume This operation copies a volume by creating a new volume and copying the original volume s content to it Unlike copying all files from the volume copying the volume itself ensures that the entire content of the new volume is the same The original and new volumes can have different types and sizes For example you can copy a striped volume as a larger simple volume Important When you copy the system volume the active volume or a boot volume you might not be able to boot the machine from the new volume Bootability will be preserved when you move such volume p 28 or clone the disk p 41 containing it To copy a volume 1 Select the volume that you want to copy and then click Copy volume 2 Select the type that the new volume will have The default type is that of the original volume 3 Depending on the type of the new volume specify one
103. m my and registering the product See Registering Acronis Products at the Website http kb acronis com content 4834 and Acronis Website User Guide http kb acronis com content 8128 3 Basic concepts This section gives you a clear understanding of basic and dynamic disks and volume types After reading this section you will know the advantages and limitations of each possible volume configuration In addition you will be able to decide what types of disks and volumes best suit your needs for organizing data storage In this section Basic and dynamic disks esses eene n k h hae ke A kn 11 Types of basic volumes ccccsccccccscessessnnececeeecessesnsaeceeeesseeseensaeeeesesseesees 11 Types of dynamic volumes keke kek kk kk nnne nnne 12 Active system and boot volumes cccccccesssssssssecececsssesseeeeeeseessessaeees 13 Dynamic volume types support jli kk nennen nnne nnne 13 Volume alignment in disks with a 4 KB sector size 14 3 1 Basic and dynamic disks Each disk on your machine can be one of two types basic or dynamic Basic disks This is the type of disk that most computers originally have Basic disks can normally be used by any operating system including any version of Windows A basic disk can store one or more volumes called basic volumes A basic volume cannot occupy more than one disk When to use basic disks
104. m which the machine starts you should move it only if it is located on a basic disk move it only within that basic disk If the volume is a boot volume that is the volume from which one of the installed Windows operating systems starts you should move it only when it is located on a basic disk move it to the same or a different basic disk A reboot is required when you move the boot volume of the currently running Windows operating system the system volume or the active volume 5 5 Merging basic volumes This operation lets you merge two adjacent basic volumes even if their file systems are different All data will remain intact and reside on the resultant volume The resultant volume will have the same label letter and file system as the main volume that is the volume to which data from the other volume will be added Free space requirements The combined amount of free space on the main volume and on the other volume must be at least 5 percent of the size of data on the other volume For example if files and folders on the other volume occupy 100 GB you need a combined total of 5 GB of free space for example 2 GB on one volume and 3 GB on another Caution Volumes that contain encrypted files cannot be merged To merge basic volumes 1 Right click the volume that you need to be merged and then click Merge volume 2 Select another volume you need to merge In Main volumes specify which one of the selected volume
105. ment 8 1 4 1 Hiding operating systems If needed you can hide any operating system installed so it will not be shown in the boot menu and Operating systems section of the OS Selector main window To hide an operating system 1 Select an operating system 2 Click Hide in the Edit sidebar section on the toolbar or in the Edit section of the main menu You can also hide an operating system using the context menu invoked by a right click This will hide the selected operating system from the list of available ones To unhide an operating system 1 Select Show Hidden in the View section of the Acronis OS Selector main menu to see the list of all hidden operating systems in the lower part of the Operating systems window 2 Select an operating system and click Unhide in the Edit sidebar section or select the respective items of the main menu Edit section or the context menu If there are other operating systems on this list you can hide them again by unselecting the Show hidden check box in the View section of the main menu 8 1 4 2 Using shortcuts Acronis OS Selector allows you to create shortcuts for any operating system in the boot menu Shortcuts enable you to create several different configurations for the same operating system Shortcut parameters are set in the same way as those of the operating system Shortcuts can be copied deleted and renamed like operating systems You can create a shortcut for a selected op
106. mns and show the hidden ones To show or hide columns 1 Right click any column header to open the context menu The menu items that are ticked off correspond to the column headers presented in the table 2 Click the items you want to be displayed hidden 4 9 Collecting system information The system information collection tool gathers system information about the machine and saves it to a file You may want to provide this file when contacting Acronis technical support To collect system information 1 Select Help gt About gt Collect system information from the top menu 2 Specify where to save the file with system information 4 10 How to How to create a volume that spans across several disks Create a dynamic volume spanned or striped by using the Create volume p 25 wizard How to increase a volume size at the expense of other volumes unallocated space Resize p 27 the volume How to merge two volumes without losing your data Use the Merge p 30 operation How to make the existing volume fault tolerant Add a mirror p 35 to this volume How to recover an accidentally deleted basic volume that has important data Use the Recovery Expert p 56 tool How to replace a hard disk without reinstalling the operating system and applications Use the Clone p 41 operation How to move dynamic disks from one system to another Use the Import foreign disks p 47 operation How to get quick access to the data stored
107. n a volume To browse a volume s content 1 Right click the volume whose contents you need to browse and then click Browse files 2 Inthe Browse window expand the folder tree to explore files and folders on the selected volume 3 When you are finished with browsing click OK Note The Browse window shows the real volume contents read from the disk If there are some operations pending such as splitting a volume you will not be able to explore the locked volumes until the operations are committed or canceled However operations on folders in the Browse window are executed immediately 5 19 Checking a volume for errors This operation is enabled in Windows operating systems and is disabled under bootable media This operation enables you to verify the logical integrity of a file system on a volume for FAT16 32 and NTFS file systems and repair any errors found Hard disk volumes should be checked before configuring any operation on them see Precautions p 16 Acronis Disk Director does not perform the checking itself rather it launches the Check Disk tool Chkdsk exe included in Windows operating system To check a volume 1 Right click the volume whose file system you need to check and then click Check 2 To find and fix errors if any select the Fix found errors check box 3 To locate bad sectors and recover readable information select the Try to fix found bad sectors check box 4 Click OK to run the vo
108. n hardware configuration re create the bootable media with the appropriate mode number in our example vga 0x318 typed in the Kernel parameters window see Linux based bootable media p 51 for details 7 1 2 2 List of commands and utilities available in Linux based bootable media Linux based bootable media contains the following commands and command line utilities which you can use when running a command shell To start the command shell press CTRL ALT F2 while in the bootable media s management console Linux commands and utilities busybox fxload ls pktsetup strace cat gawk lspci poweroff Swapoff cdrecord gpm lvm ps swapon chmod grep me raidautorun sysinfo chown growisofs mdadm readcd tar chroot grub mkdir reboot tune2fs cp gunzip mke2fs rm udev dd halt mknod rmmod udevinfo df hexdump mkswap route udevstart dmesg hotplug more scp umount dmraid ifconfig mount scsi id uuidgen e2fsck init mtx sed vconfig e2label insmod mv sg_map26 vi echo iscsiadm parted sh zcat egrep kill pccardctl sleep fdisk kpartx ping ssh fsck in pktsetup sshd 7 2 Acronis Recovery Expert Acronis Recovery Expert is an easy to use tool that lets you recover volumes on a basic MBR disk that were accidentally deleted or damaged due a hardware or software failure In case your volumes are damaged and the machine fails to boot for example after a power outage or a system error use the bootable version of Acronis Disk Director and run Acronis
109. n nnne nnne an 16 Running Acronis Disk Director cccconoccononccnnnononononnnnnnnnnnnnnnanononnnnnnanannnos 16 Acronis Disk Director main window eese 17 Disk and volume information E keke ke ke 18 PIE posses _B_B e_d d ce_ BcerbrbBEbErERBrrrrrb_beebnebeewuauammmmm 19 Performing operations ccscccccccecsssssssseceeececeesesseaeeeeeessessesesaeeeeesssessees 20 LOB cese eu ME IURE ME M S e EIN 21 Collecting system information ooooccccnccononononnnnnononnnanononnnncnnncnnnanncnnnnnnnnns 23 A EE HES ME P ME 23 4 1 Precautions To avoid any possible disk and volume structure damage or data loss please take all necessary precautions and follow these simple rules 1 Backupthe disk whose volumes will be created or managed Having your most important data backed up to another hard disk or CD will allow you to work on disk volumes being reassured that your data is safe Acronis has an extremely effective comprehensive data backup and recovery solution Acronis True Image It creates a data or disk backup copy stored in a compressed archive file that can be restored in case of an accident 2 Check volumes p 37 to make sure they are fully functional and do not contain any bad sectors or file system errors 3 Do not perform any disk volume operations while running other software that has low level disk access Acronis Disk Director must obtain exclusive access to the target di
110. n operating system to protect Click Set Password in the Operations section of the main window sidebar Enter and confirm a password in the Set Operating System Password dialog and click OK An operating system password must be at least six characters long You can also set an operating system password by clicking Set Password on the toolbar in the OS section of the main menu or in the context menu invoked by a right click 8 1 3 4 Setting operating system properties Acronis OS Selector automatically determines properties of all operating systems installed on a machine If needed you can set them manually by clicking Properties in the Operations section of the main window sidebar boot menu the respective main menu toolbar or context menu items General properties This section allows you to change the name and icon for any operating system listed in the boot menu Boot configuration This section allows you to set the following boot parameters Write Boot Sector write boot sector each time an operating system boots Boot as MS DOS 7 1 can be set for operating systems compatible with MS DOS 7 1 that were not automatically located by Acronis OS Selector Boot as OS 2 can be set for operating systems compatible with OS 2 that were not automatically located by Acronis OS Selector Enable large disks support enables large disks support for Windows 98 Me operating systems only Partitions Acronis OS
111. nal turning off of the machine or accidental pressing of the Reset button during the procedure could result in bootability loss The program ensures the bootability of each of the operating systems for machines where more than one operating system is installed Safe conversion of a dynamic disk to basic when it contains volumes with data for simple volumes 6 7 Changing a disk status online to offline Effective for Windows Vista SP1 Windows 7 operating systems and applies to the current disk layout p 19 The online status means that a basic or dynamic disk is accessible in the read write mode This is the normal disk status You may need to change an online disk to offline in order to protect it from unintentional use for example a disk is corrupted or has bad sectors To make a disk offline 1 Right click the online disk and then click Change status to offline 2 Inthe appearing window click OK to confirm the operation When taking a dynamic disk whose volumes span across several disks offline these volumes get statuses with respect to their type Simple Spanned Striped volumes become Failed Mirrored volumes become Failed Redundancy The disk you took offline also becomes Missing To recover Simple Spanned Striped volumes it is enough to take the offline disk to online p 46 To recover Mirrored volumes you need to take the offline disk online and then reactivate it For information on how to bring a disk that is o
112. nallocated space you can free up space by resizing respective volumes see Resizing a volume p 27 Acronis Disk Director allows conversion of free logical volumes into primary see Converting a logical volume to primary p 34 Still you must remember that there cannot be more than four primary volumes in a system Set the prepared volume active for the new operating system see Setting a volume active p 35 When installing a new operating system from CD DVD select the CD item in the Operating systems area of the Acronis OS Selector main window When installing a new operating system from floppy disks create a new Boot from floppy item by selecting OS gt New gt Boot from floppy in the Menu Then right click on that item select Operating System Properties gt Partitions from the context menu and flag the volume you want the operating system on as Active Reboot and select your CD DVD or floppy bootup from the boot menu having inserted the disk with the operating system distribution Once booted from the disk follow the instructions to install the operating system During installation the Windows bootable part will automatically place itself on the primary volume you have previously set as active When you boot either version of Windows using Acronis OS Selector later each operating system in the list will recognize the volume where its bootable part is located as active Installing another Windows OS on the same v
113. name that can be assigned to a volume p 92 to simplify its identification by the user The length of a volume label depends on the volume s file system p 86 For example the NTFS file system allows volume labels of up to 32 characters Some file systems such as FAT16 and FAT32 do not allow certain characters in a volume label for example a colon or a quotation mark Volume letter A letter such as C that a Windows operating system assigns to a volume to locate files and folders that are stored on it A volume letter is usually assigned when you format the volume It can be assigned changed or removed later without affecting the volume s data A volume letter is also called a drive letter Volume type The type of volume which is determined by the volume structure and by the type of disk on which the volume resides The following is the list of volume types with short descriptions Basic volume p 81 A volume on a basic disk Can be one of the following types Primary volume p 90 Can store information needed to start the machine or an operating system Logical volume p 87 Usually stores user files and operation system data Dynamic volume p 85 A volume on one or more dynamic disks Can be one of the following types Simple volume p 90 Occupies a single disk Spanned volume p 90 Occupies two or more disks in arbitrarily sized portions Striped volume p 91 Occupies
114. ncluding all software installed into the BOOTWIZ folder You will then be able to remove unneeded applications from each of the systems However keep in mind that the Copy feature does not allow copying an operating system onto a specified disk or volume New Operating System Wizard If you installed a new copy of Windows on your machine the New Operating System Wizard will help you set up its properties when you run the Boot menu of Acronis OS Selector for the first time Having installed a Windows operating system you can either save or replace pre existing Windows versions lf you need to update an existing Windows version with a new copy of Windows select Yes update existing operating system In this case the New Operating System Wizard will automatically determine Windows versions available for update fyou need to leave your existing Windows copies as is select No add new operating system In this case a new copy of Windows will be added to the list of available operating systems in the Boot menu If you chose to update the existing operating system the New Operating System Wizard will automatically determine the list of operating systems installed that are available for update In the list provided select an operating system to update by replacing it with a new copy of Windows 2000 XP When a new operating system is configured click Proceed to confirm the selected operations If Acronis OS Selector cannot automat
115. nfirm the operation all the disk data will be deleted completely and you will not be able to recover it unless you have backups of this disk made with Acronis disk backup and recovery solutions 8 2 6 4 Restoring deleted files Acronis Disk Editor can be used to restore deleted files even after the volume has been formatted or deleted A file can be restored only if it was stored contiguously as a unit on this volume i e the file should not be fragmented it was not overwritten by another data Restoring files with Acronis Disk Editor is a bit tricky and requires some hex editor working skills To restore a file you need to obtain some distinctive information about it from the Hex view This information will help you to locate the file when searching for it in Hex view The following example describes how to restore a couple of jpeg images files from the formatted volume Prerequisites 1 The files had been located on the volume My Data G before it was formatted 2 These images were taken by the certain type of camera 3 Files were stored as units and they were not overwritten by another data To restore files 1 Ina file manager that supports Hex open an existing jpeg file similar to the deleted file Our goal is to find some information that can be used to distinguish these jpeg files among the other data stored on the volume Lets open a similar jpeg image that was taken with the same camera in Hex mode with the
116. ng a volume s COnte nt enean 37 Checking a volume for errors esses eene 37 Defragmenting a volume sess enne kk KAKA KAKA KAKA KA KA 37 Changing a cluster SiZB ii clike esna keka eene Hek eka kalan keka sa nnn nnn nnn 38 Changing a file system MAA A A K KE E Ell ake kk kk kk k kek KEKE KAKA KAKA 38 Hiding a volume seiersen inantea kora k awaya kasek ek nenne netiis arena 39 Unhiding a volume cccccccononononnonononanonononnnnnnnnnnnnnonnnnnnnnnnnnnnnnrnnnnnnnnnnnnnnns 39 Specifying i node density cccoconccoccconccnnanononnnnnonononanononnnnnnnccnnanononnnnnnnnnns 40 5 1 Creating a volume You might need a new volume to Store data for example a music collection photo albums or video files Store backups images of other volumes disks especially boot volumes to be able to recover the system in case of disaster Install a new operating system or swap file To create a new volume 1 Runthe Create Volume Wizard by right clicking any unallocated space and then click Create volume Specify the type that the new volume will have Every volume type is provided with a brief description to let you better understand the advantages and limitations of each possible volume type To learn more about volume types see Types of basic volumes p 11 and Types of dynamic volumes p 12 The list of volume types contains only the types that are supported p 13 by the curre
117. ns will effectively cancel them 6 11 Cleaning up a disk This operation erases all volumes and data on a disk making it not initialized All volumes even those spanning across other disks are erased from the disks and the space that was occupied by these volumes becomes unallocated space To be able to use the cleared up disk you need to initialize p 41 it once again To clean up a disk 1 Right click the disk you need to clean up and then click Clean up disk 2 Click OK to add the pending disk clean up operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them Note If you accidentally cleared an MBR disk with important data it is still possible to recover the volumes on this disk by using Acronis Recovery Expert p 56 But do not forget to initialize the disk and set MBR partitioning scheme first 7 Tools This section describes Acronis Bootable Media Builder and Acronis Recovery Expert tools After reading this section you will have learned how to create bootable media in order to use Acronis Disk Director on bare metal or outside of an operating system and how to recover deleted or lost volumes In this section Acronis Bootable Media Builder keke kk k 49 Acronis Recovery Expert
118. nt operating system Depending on the type of the new volume specify one or more disks where you want to create the new volume If the new volume is basic select one basic disk and specify one region of unallocated space on that disk Note You cannot create a basic volume ona disk that already has four primary volumes you first need to convert one of those volumes to logical see Converting a primary volume to logical p 33 This restriction does not apply to GPT disks jfthe new volume is simple or spanned select one or more disks If the new volume is striped select two or more disks m Ifthe new volume is mirrored select two disks Note for striped and mirrored volumes Because these volumes occupy space on their disks in equal parts the maximum size of such volume will depend on the selected disk with the least amount of unallocated space When creating a dynamic volume and selecting one or several basic disks as its destination the selected disks will be converted to dynamic automatically Specify the size of the new volume By default the volume size is set to maximum To specify a different size move the slider or enter the required value into the Volume size field If the disk still has unallocated space after you have set the size of the volume you can set the amount of unallocated space before and after the basic volume To do this drag the volume within the unallocated space or type the re
119. ogram without committing the pending operations will effectively cancel them 5 23 Hiding a volume This operation applies to volumes on basic MBR disks Hiding a volume means changing the volume type so that the operating system cannot see this volume You may want to hide a volume in order to protect information from unauthorized or casual access Hiding a volume does not affect letters assigned to other volumes but the hidden volume loses its letter and this letter becomes free for assignment Important Hiding a volume that contains a swap file will prevent your machine from booting Hiding a system volume or a boot volume with a currently running operating system is disabled in order to retain your machine bootability To hide a volume 1 Right click the volume you need to hide and then click Hide volume If the volume has mount points they will be removed automatically 2 Click OK to add the pending volume hiding operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 24 Unhiding a volume This operation applies to hidden volumes on basic MBR disks Unhiding a hidden a volume means changing the volume type so that it will be visible by the operating system You may want to unhide a volume in order to
120. ols essere 74 Editing SIN ere E 74 ViWesi a E EE 75 O AO 76 Usage AMS ii ae 76 8 2 1 Starting work with Acronis Disk Editor To start Acronis Disk Editor 1 Connect the console to the machine where Acronis Disk Director Agent is installed 2 Inthe disk management area right click a disk or volume and then click Edit This will start Acronis Disk Editor providing access to its operations The difference between selecting the entire disk or selecting a volume is the following if you select the entire disk you will be able to view and edit data storage structures of the entire disk Partition table File Allocation Table of all disk volumes the root folder data area selecting a volume lets you view and edit only data storage structures of this volume File Allocation Table the root folder and data area of the volume 8 2 2 Main window menu and controls The main window displays the numbers of disk and sector where the internal program cursor is positioned The menu of Acronis Disk Editor contains the following items Disk lets you browse properties of the selected disk Edit lets you manipulate blocks of selected hard disk volumes also lets you to save the content of a disk sector after editing View lets you select a view mode for more convenient data presentation By default the main window of the program displays the selected volume or disk in the hexadecimal Hex mode
121. olume In some cases you might want to install several operating systems onto the same volume This is usually not possible due to system files conflicts and even operating systems from the same developer require different volumes for installation Acronis OS Selector enables you to avoid this restriction easily by protecting system files and folders of various operating systems from each other To install a new operating system onto a volume where another Windows operating system exists you need to do the following 1 2 Select Tools gt Options gt General options and flag Yes protect folders In the active operating system s Properties select Folders and enable the restoring of each system folder s content at system start see Folders p 62 After that system files and folders of an existing operating system will be stored in the BOOTWIZ folder and made inaccessible for other operating systems installed Reboot the machine to finish the configuration Start installing a new operating system in the ordinary way from a CD DVD or from under Windows Installing another Windows OS on a different disk To install a new Windows operating system onto a different disk do the following 1 When installing a new operating system from CD DVD select the CD item in the Operating systems area of the Acronis OS Selector main window When installing a new operating system from floppy disks create a new Boot from floppy i
122. on a Linux volume under Windows Use the Browse files p 37 operation How to place files from a Linux volume into a folder on a Windows volume Use the Merge p 30 operation selecting the Windows volume as the main volume How to erase all information on the volume Use the Format p 30 operation How to increase the system performance Use the Defragmentation p 37 operation How to verify the logical integrity of a file system on a volume and repair any errors found Use the Check p 37 operation How to explore data stored on a volume before performing any operation Use the Browse files p 37 operation How to work with hard disk drives that use 4 KB sector size Follow the guidelines described in the Volume alignment in disks having a 4 KB sector size p 14 section How to save copy and restore the MBR Read the Usage examples p 76 section of Acronis Disk Editor How to change the volume s cluster size Use the Change cluster size p 38 operation How clean up the disk Use the Clean up disk p 48 operation 5 Volume operations This section describes all the operations that you can perform with volumes in Acronis Disk Director Acronis Disk Director must obtain exclusive access to the target disk volume This means no other disk management utilities such as the Windows Disk Management utility can access it at that time If you receive a message stating that the disk volume cannot be blocked close the dis
123. ore disks If the new volume is mirrored select two disks Note for striped and mirrored volumes Because these volumes occupy space on their disks in equal parts the maximum size of such volume will depend on the selected disk with the least amount of unallocated space 4 Specify the size of the new volume This size cannot be less than the size of data on the original volume For a basic volume you can increase its size only by taking unallocated space that is adjacent to it 5 Inthe volume layout diagram at the bottom of the window you can specify the space that the volume will occupy on each of the selected disks by typing the sizes or by dragging the sliders 6 Click Finish to add the pending volume moving operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them Moving system boot and active volumes Important Do not move any of these volumes unless you absolutely need to If you want to transfer your system to a new hard disk consider disk cloning instead see Basic disk cloning p 41 The machine or its operating system will not always remain bootable after you move such volume To preserve bootability follow these guidelines If the volume is system or active that is the volume fro
124. ot part is located When detecting Linux choose the partition containing Linux loader for Windows see Installing several Windows copies to a single machine p 68 Then click Bootable Whatever the location of the operating system selected you can set options of available partitions for example hide some of them These settings will be applied to the partitions each time you boot the detected operating system 4 Ifyou selected Detect OS in MBR or on a FAT hard disk partition select if you want to use Boot sector on partition or Boot sector in file Generally the first setting will be enough Having selected the second you will have to specify a path to the file containing a previously saved boot sector of the detected operating system 5 Next you will see a list of detected operating systems Click Finish to add them to the Acronis OS Selector boot menu and main window 8 1 6 Setting Acronis OS Selector options You can set Acronis OS Selector options by clicking Options in the Tools sidebar section or selecting a respective item on the Toolbar or main menu 8 1 6 1 General options Acronis OS Selector is able to protect system folders automatically when a new operating system is detected System folder protection is required when multiple operating systems are ona single machine especially in situations when several operating systems are located on the same hard disk volume To choose a suitable configuration click one
125. quired amount of space before and after the volume in the respective fields In the volume layout diagram at the bottom of the window you can specify the space that the volume will occupy on each of the selected disks by typing the amounts or by dragging the Sliders Specify the following options of the new volume File system by default NTFS Some of the supported file systems p 7 will be disabled depending on the chosen volume type and size for example FAT32 will be disabled if the volume size has been set at more than 2 TB Cluster size Select the cluster size the smallest amount of disk space which will be allocated to store a file We recommend leaving the default size which is marked in the list as default The default cluster size depends on the volume size and the type of the file system for example the default cluster size for up to 2 TB NTFS volumes is 4 KB Volume label by default NONE A short name that you can assign to a volume to better differentiate it from other volumes The maximum length of a volume label depends on the volume s file system see Changing a volume label p 32 Letter by default the first free letter of the alphabet Assign a drive letter to the volume to be able to locate files and folders on it If the new volume is basic specify whether it will be Primary Set the volume as Primary if you plan to install an operating system on it Mark the primary volume as Activ
126. r Clicking Boot on the toolbar Selecting Boot in the OS section of the main menu Booting an OS from the Acronis OS Selector main window With Acronis OS Selector you can boot an available operating system from under Windows by Running Acronis OS Selector Double clicking the operating system icon in the central part of the main window You will be prompted to reboot Click OK to confirm and continue If you select the same operating system you are in at the moment the machine will reboot after your confirmation You can also boot the selected OS using The Boot button in the Operations section of the Main Window The Boot button on the toolbar The Boot item in the OS section of the main menu 8 1 3 2 Setting an operating system as the default Any operating system can be set as the default This means it will already be selected when the boot menu is invoked If you install a new operating system after Acronis OS Selector installation it will be set as the default automatically You can set an operating system as the default by clicking Set default in the Operations section of the sidebar or the respective item in the OS section of the main menu or the respective item of the context menu invoked by a right click 8 1 3 3 Setting operating system passwords If needed you can protect any installed operating system with a password to prevent its unauthorized booting To set a password Select a
127. rations LENITER 4 8 1 Actions on log entries redit alitas 4 8 2 Filtering and sorting log CNtri s ccccsccscsessesssssesecsssscsscsscssssessecssssesscsessecoessessessesssesesesoeeeesoessecaeesseasonees 22 4 9 Collecting system information ui nennen nennen nennen nennt nnn KAKE neni KA KAKA 23 ATO etat RTL 23 5 Volume operations oansnien aae EAA ENAERE ASKEEK S 25 5 3 reating a Volume oreet ceret t a k n A EW ORT de A adeo iaa aaa aa dek Kaw n nad 25 5 2 RESIZING a volutme 2 ite T r Ke kake e dre A Tea a Ve Dn ane VE Re SURA eiie rs 27 5 3 Gopying a Volume Ree A Ia RE 28 54 Moving a volume eter EATER da 28 5 5 Merging basic volumes Sitin renren a a a a E a ae aaa a Eaa T aa aE 30 5 6 Formatting a Volume erre EE end En 30 522 Deleting a vol me sese ted i tete t avesse etit AR a E 31 5 8 Splitting a basic volume esses nennen enne nen le ee san xandan E daene n k pen d nk aene A 31 5 9 Changing a vol nhnie la b lik 2 eie a as 32 5 10 Changinga drive letter a enne et pete 33 5 11 Converting a primary volume to log Ccal u keke nnne nnns 33 5 12 Converting a logical volume to priMary ccccconococconnnncnonononannnnnnnnnnnononnnnnnnnnnnonanononnnnnnnnnnnnn canos 34 5 13 Changing a partition type ccccccononoooonnononnnanonannnnnnncnnnonononnnnnnnnnnnnnnnnnnnnnnnnnnnnnonnrnnnnnnnnananennnnss 34 5 14 Setting a volume active i e etr
128. rive may prevent Acronis OS Selector from starting at bootup and force loading its own bootable program or operating system We highly recommend that you set the system bootup sequence in BIOS so that the HDD will be the first device To prevent the Acronis OS Selector boot menu from being invoked at bootup select Deactivate OS Selector in the Tools section of the Acronis OS Selector main menu under Windows or in the respective boot menu section at machine bootup Then you will be prompted to select an operating system to be booted after the boot menu is deactivated You can avoid displaying the Acronis OS Selector boot menu at bootup even if OS Selector is active To do so press F6 immediately after turning on the computer before the first messages appear on the screen This will boot an OS from the volume that is active according to Master Boot Record MBR 8 1 3 Operations This section describes operations available for selected operating systems or their shortcuts 8 1 3 1 Booting operating systems You can boot any operating system with Acronis OS Selector From the boot menu if activated From under Windows from the Acronis OS Selector main window Booting an OS using the boot menu Having turned on the machine wait for the Acronis OS Selector boot menu to be invoked and select and double click an operating system to boot You can also boot a selected OS by Clicking Boot in the Operations section of the boot menu sideba
129. ronis OS Selector boot menu even if the system volume is unavailable 2 7 Updating Acronis Disk Director To update Acronis Disk Director 11 1 Download the latest product update from the official Acronis web site Run the Acronis Disk Director setup file Click Update Remove Acronis Disk Director Select Update Proceed with the update Oh dee l Xx 2 8 Removing Acronis Disk Director To remove Acronis Disk Director 1 Depending on the operating system running do either of the following for operating systems starting from Windows Vista select Start gt Computer gt Uninstall or change a program then select Acronis Disk Director and click Uninstall for operating systems older than Windows Vista select Control Panel gt Add or remove programs then select Acronis Disk Director and click Remove 2 Follow the instructions on the screen Acronis Disk Director will be completely removed along with Acronis OS Selector To remove Acronis OS Selector only select Start gt All Programs gt Acronis gt Disk Director gt Install Acronis OS Selector Then select Uninstall Acronis OS Selector in the installation program window and follow the program instructions 2 9 Upgrading Acronis Disk Director Before proceeding with the upgrade make sure that you have the license key for Acronis Disk Director Upgrading from Acronis Disk Director 10 If you already have Disk Director 10 installed and want to upgrade
130. ronis OS Selector is installed together with Acronis Disk Director all operating systems that exist on the given machine will be automatically located and added to the boot menu The software will also automatically set the parameters and properties for every operating system found see Setting operating system properties p 61 You can run Acronis OS Selector as a separate application by clicking Start All Programs Acronis Disk Director gt Acronis OS Selector You can control Acronis OS Selector in two ways From its main window under Windows From the Acronis OS Selector boot menu invoked at bootup before the operating system is booted The boot menu has the same interface and structure as the main window The key part of the main window Operating systems contains a list of operating systems available for loading on this machine Acronis OS Selector automatically determines all operating systems installed and lists them in the boot menu at machine bootup and in the Acronis OS Selector main window under Windows If you insert a bootable CD DVD it will be detected and displayed in the boot menu main window as well The CD DVD can contain an operating system or any bootable program in all cases you will see a new icon in the operating systems area The left part of the window the sidebar contains the following sections also available in the main menu and customizable toolbar Operations This section includes act
131. ructure on a hard disk p 87 Partitioning usually involves creating one or more volumes p 92 on the disk Acronis Disk Director is an example of a program that can perform partitioning Partitioning scheme The method of organizing volumes on a disk There are two partitioning schemes master boot record MBR and GUID partition table GPT A disk whose partitioning scheme is MBR is called an MBR disk a disk whose partitioning scheme is GPT is called a GPT disk The partitioning scheme determines the number of volumes that the disk can have A basic MBR disk can have either four primary volumes p 90 or three primary volumes and an unlimited number of logical volumes p 87 A basic GPT disk can have up to 128 primary volumes The partitioning scheme also determines the maximum size of each volume The maximum volume size on an MBR disk is 2 terabytes The maximum volume size on a GPT disk is 16 exabytes more than 16 million terabytes Partitioning scheme is also known as partitioning style or partition style Physical disk A disk p 83 that is physically a separate device Thus floppy disks hard disks and CD ROMs are physical disks Primary partition See Primary volume p 90 Primary volume A volume which is located on a portion of a basic disk p 81 and works as if it were on a separate hard disk Primary volumes often store files that are necessary to start the machine or an operating
132. s a single contiguous region When you extend a simple volume to another disk the volume becomes a spanned volume p 90 When you add a mirror to a simple volume the volume becomes a mirrored volume p 88 Spanned volume A volume that consists of disk space from two or more dynamic disks p 84 in portions that do not need to be equally sized A spanned volume can reside on up to 32 disks Unlike mirrored p 88 and RAID 5 volumes spanned volumes are not fault tolerant Unlike striped volumes p 91 spanned volumes do not provide faster data access Striped volume A volume that resides on two or more dynamic disks and whose data is evenly distributed across equally sized portions of disk space called stripes on those disks Access to data on striped volumes is usually faster than on other types of dynamic volumes because it can be performed simultaneously on multiple hard disks Unlike a mirrored volume p 88 a striped volume does not contain redundant information so it is not fault tolerant A striped volume is also known as a RAID 0 volume Mirrored volume A fault tolerant volume whose data is duplicated on two physical disks p 90 Each of the two parts of a mirrored volume is called a mirror All of the data on one disk is copied to another disk to provide data redundancy If one of the hard disks fails the data can still be accessed from the remaining hard disks Volumes that can be mirrored include th
133. s will be considered as a main Data from the other volume will be added to a separate folder on the main volume This folder will be named according to the volume label and volume letter if present for example Merged Volume System C 3 Click OK to add the pending volumes merging operation At the bottom of the window you can estimate how the resultant volume will look like after the merging The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them Merging an NTFS volume to a volume with a file system that does not support security options for example FAT32 volume will result in the loss of security settings volume ownership data and access permissions With the opposite action merging a non secured volume to a secured one the main volume security settings will be assigned to the resultant volume 5 6 Formatting a volume The formatting operation prepares a volume to store files and folders by creating a file system on it Caution Formatting destroys all data that is currently stored on the volume You may want to format a volume in the following cases When you are creating the volume In this case the formatting window is part of the Create Volume Wizard When you want to quickly destroy data on th
134. sk volume This means no other disk management utilities such as the Windows Disk Management utility can access it at that time If you receive a message stating that the disk volume cannot be blocked close the disk management applications that use this disk volume and start again If you cannot determine which applications use the disk volume close them all With these simple precautions you will protect yourself against accidental data loss 4 2 User privileges In order to perform any operation using Acronis Disk Director you must be logged on as a member of the Administrators group 4 3 Running Acronis Disk Director Running Acronis Disk Director in Windows 1 Select Start gt All Programs gt Acronis gt Disk Director gt Acronis Disk Director In the disk management area examine the current layout of disks and volumes Add one or more management operations on disks and volumes to the queue of pending operations These operations will take effect only after you commit them 4 Inthe disk management area examine how the layout of disks and volumes will look when the pending operations are completed 5 Commit the pending operations Some operations such as changing the size of a volume from which Windows starts may require restarting the machine Running Acronis Disk Director from a bootable media Acronis Disk Director has a bootable version that can be run on a bare metal system or on a crashed machine that c
135. stored The following describes how you can save the MBR code copy and restore it in case failure Step 1 Saving MBR 1 In Acronis Disk Director right click the disk whose MBR code you need to save and then click Edit 2 In Acronis Disk Editor press F2 key to switch to the Hex view mode 4 5 6 Place the cursor at the very beginning of the first sector byte Absolute sector 0 or 0000 in Hex Then hold down the Shift key and use the arrow keys to select the first 445 bytes of the sector This will select the MBR code and disk signature Tip The exact cursor position is displayed in the Position field on the status bar in the bottom right corner of the window Select the Write to file item in the Edit menu In the Write to file window click Browse and specify the path and file name Click OK to save the file Step 2 Restoring MBR 1 Ur odes Un o pe c m Create bootable media in order to be able to restore the system in case of failure Bootable media is created with Acronis Bootable Media Builder as described in How to create bootable media p 50 Boot the machine with the bootable media and run Acronis Disk Director Right click the disk whose MBR you need to restore and then click Edit In Acronis Disk Editor press F2 key to switch to the Hex view mode Place the cursor at the very beginning of the first sector byte Absolute sector 0 or 0000 in Hex and then click Read from file In the Read from
136. supplementary information Caution Avoid converting the active volume or the system volume to logical Otherwise the machine will likely become unbootable You can later convert the volume back to primary see Convert to primary p 34 To convert a primary volume to logical 1 Right click the primary volume that you want to convert to logical and then click Convert to logical 2 Click OK to add the pending primary volume to logical conversion operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 12 Converting a logical volume to primary This operation applies to basic disks whose partitioning style is MBR It converts a logical volume on such disk to a primary volume Each basic MBR disk can have either up to four primary volumes or up to three primary volumes plus an unlimited number of logical volumes You need to convert a logical volume to primary if you want to restore the bootability of a machine whose system volume was accidentally converted to logical If the disk contains more than one logical volume you can convert a logical volume to primary only when there are two or less primary volumes on the disk You can later convert the volume back to logical see Convert to logical p 33
137. system Many operating systems can start only from a primary volume The number of primary volumes on the disk is limited and depends on the partitioning scheme p 89 A primary volume is also called a primary partition R Root folder The folder p 86 where the folder tree of a file system p 86 begins Starting from the root folder you can uniquely describe the file p 85 position in the folder tree by sequentially naming all the intermediate nested folders for example Windows System32 Vmm32 vxd In this example the Windows folder is a subfolder of the root folder the System32 folder is a subfolder of the Windows folder and the Vmm32 vxd file is located in the System32 folder S Sector The smallest information unit on a disk p 83 that is transferred in a single read or write operation Usually a sector is 512 bytes in size Simple volume A volume p 92 that consists of disk space from a single dynamic disk p 84 Physically a simple volume can occupy more than one region of disk space which can be logically perceived as a single contiguous region When you extend a simple volume to another disk the volume becomes a spanned volume p 90 When you add a mirror to a simple volume the volume becomes a mirrored volume p 88 Spanned volume A volume that consists of disk space from two or more dynamic disks p 84 in portions that do not need to be equally sized A spanned volume can reside
138. t as the default in the Acronis OS Selector boot menu If you require another operating system to have this status you will have to adjust the respective operating system properties see Setting an operating system as the default p 60 8 1 7 1 Reactivating the Acronis OS Selector boot menu Because operating systems can change the Master Boot Record MBR during installation Acronis OS Selector which also uses the MBR might become inoperable If this happens you will not have to reinstall Acronis OS Selector but to reactivate it by selecting Activate OS Selector from the Tools menu of Acronis OS Selector Besides automatic reactivation is provided for Windows 98 operating system To do this Acronis OS Selector adds a REINSTAL COM launch line into AUTOEXEC BAT that restores Acronis OS Selector MBR code Still if this program does not do the thing correctly you can reactivate Acronis OS Selector manually It is impossible to perform automatic MBR recovery under Windows Millennium Edition as this OS has a feature limited version of MS DOS 8 0 that can t run programs from AUTOEXEC BAT 8 1 7 2 Installing several Windows copies to a single machine General information Any Windows operating system consists of two parts bootable and main Windows 2000 XP has NTLDR OS core loader a simple boot manager that requires the BOOT INI configuration file NTDETECT COM initial hardware detector while Windows 7 has bootmgr load
139. t this data will be lost after the cloning In the Select a cloning method window select the cloning method As is information from the source disk is transferred to the target As is So if the target disk is the same size and even larger it is possible to transfer all the information there exactly as it is stored at the source When cloning to a larger target disk the remaining space becomes unallocated Use proportional volume resizing for the supported file systems p 7 recommended when the target disk is larger or smaller than the source The program will automatically increase or decrease the if possible size of the volumes with respect to the target disk size Thus no unallocated space appears on the target disk Note for smaller target disks the program analyzes the target disk to establish whether its size will be sufficient to hold all the data from the source disk without any loss If such transfer with proportional resizing of the source disk volumes is possible then you will be allowed to proceed If due to the size limitations safe transfer of all the source disk data to the target disk is impossible even with the proportional resizing of the volumes then the Clone basic disk operation will be impossible and you will not be able to continue If you are about to clone a disk containing the system volume pay attention to the Advanced options described later in this section 5 Click Finish to add the pen
140. t will happen to the system if the chosen disk is converted from dynamic to basic For example if the disk you want to convert to basic contains any volumes that are only supported by dynamic disks all volume types except Simple volumes then you will be warned here about the possible damage to the data involved in the conversion 2 Click OK to add the pending dynamic to basic disk conversion operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them After the conversion the last 8 MB of disk space is reserved for the future conversion of the disk from basic to dynamic In some cases the possible unallocated space and the proposed maximum volume size might differ for example when the size of one mirror establishes the size of the other mirror or the last 8 MB of disk space is reserved for the future conversion of the disk from basic to dynamic Boot disk conversion The program does not require an operating system reboot after dynamic to basic conversion of the disk if 1 There is a single Windows Vista or Windows 7 operating system installed on the disk 2 The machine runs this operating system Caution The conversion of a disk containing boot volumes takes a certain amount of time Any power loss unintentio
141. tem by selecting OS gt New gt Boot from floppy in the Menu Then right click on that item select Operating System Properties gt Disks from the context menu and set the target disk where the new operating system will be installed to be the first Having inserted the disk with the operating system distribution reboot and select your CD DVD or floppy bootup from the boot menu Once booted from a disk follow the instructions to install the operating system By setting the target disk to be the first you will force the boot part of Windows to be installed on that disk so that the new operating system can boot even if the first disk is damaged or has been removed However you may choose not to do it The new operating system will then boot from the first disk in spite of its system folders residing on another disk Installing additional Windows copies In some cases you might need to install two copies of the same Windows operating system for example two or more Windows 7 copies each having its own properties and application sets The first way to do it is to use one of the methods described above These imply a complete OS installation The second way is simpler operating system duplication using the Operating system copy feature described in detail in the Copying operating systems p 64 section of this guide The program will fully duplicate contents of Windows Program Files Users and Documents and Settings folders i
142. the start process continues from the volume known as the system volume System volume This is the volume from which any of the installed Windows operating systems starts even if more than one is installed The system volume contains files that are necessary to start Windows such as boot ini and Ntldr There is always one system volume whereas each of the installed Windows operating systems usually stores its files on its own volume called a boot volume Boot volume This is the volume on which the files of a particular Windows operating system are stored A boot volume contains folders such as the Program Files folder and the Windows folder Note The notions of system volume and boot volume apply only to Windows operating systems 3 5 Dynamic volume types support The table below lists the operating systems that support certain dynamic volume types Simple Spanned Striped Mirrored Windows XP Home E E z E Windows XP Professional Windows XP Professional x64 Windows Vista Home Basic Windows Vista Home Premium Windows Vista Business Windows Vista Ultimate Windows 7 Starter Windows 7 Home Premium Windows 7 Professional Windows 7 Ultimate 3 6 Volume alignment in disks with a 4 KB sector size When a new volume is created its beginning is aligned with the disk s physical sector boundaries It ensures that each file system allocation unit cluster on the volume starts and ends on the boundaries of th
143. tion and Power Interface ACPI You may want to use this parameter when experiencing problems with a particular hardware configuration noapic Disables Advanced Programmable Interrupt Controller APIC You may want to use this parameter when experiencing problems with a particular hardware configuration vga ask Prompts for the video mode to be used by the bootable media s graphical user interface Without the vga parameter the video mode is detected automatically vga mode_number Specifies the video mode to be used by the bootable media s graphical user interface The mode number is given by mode_number in the hexadecimal format for example vga 0x318 Screen resolution and the number of colors corresponding to a mode number may be different on different machines We recommend using the vga ask parameter first to choose a value for mode_number quiet Disables displaying of startup messages when the Linux kernel is loading and starts the management console after the kernel is loaded This parameter is implicitly specified when creating the bootable media but you can remove this parameter while in the boot menu Without this parameter all startup messages will be displayed followed by a command prompt To start the management console from the command prompt run the command bin product nousb Disables loading of the USB Universal Serial Bus subsystem nousb2 Disables USB 2 0 support USB 1 1 devices still work with t
144. tively cancel them More about cluster sizes Using the default cluster size is normally the best option Smaller cluster sizes allow for more efficient storage if the volume is to contain a vast number of very small files Bigger cluster sizes make it possible for the volume to have a size beyond normal limits For example you can create a 4 GB volume with the FAT16 file system by using a cluster size of 64 KB Important Some programs do not work correctly with volumes whose file systems have big cluster sizes such as a cluster size of 64 KB in the FAT16 and FAT32 file systems and cluster sizes of 8 KB through 64 KB in the NTFS file system For example these programs may incorrectly calculate the total and available space on such volumes 5 7 Deleting a volume This operation deletes a selected volume The space that was occupied by the volume becomes unallocated space on the corresponding disk or disks Caution After you delete the volume all data that is stored on it will be lost Tip Deleting a mirrored volume means deleting both of its mirrors For information on how to delete only one mirror see Removing a mirror p 36 To delete a volume 1 Right click the volume that you want to delete and then click Delete volume 2 Click OK to add the pending volume deletion operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pendin
145. two or more disks in equally sized portions Can provide faster data access Mirrored volume p 88 Occupies two disks in two identical portions mirrors Fault tolerant RAID 5 volume Occupies three or more disks in equally sized portions Fault tolerant
146. typed contains such characters 3 Click OK to add the pending volume label changing operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them Label characters not allowed in FAT16 and FAT32 The FAT16 and FAT32 file systems do not allow the following characters in the volume label backslash slash colon asterisk question mark quotation mark less than sign lt greater than sign gt and pipe Volumes whose labels cannot be changed You cannot assign a volume label to a volume whose file system is shown as Unsupported Not formatted or Linux swap If an Acronis backup product such as Acronis True Image Home is installed on your machine you may have a volume known as Acronis Secure Zone ASZ The volume label of this volume cannot be changed 5 10 Changing a drive letter Windows operating systems assign drive letters such as C to volumes to locate files and folders on them You can set up modify or remove the drive letter of a volume that is supported by Windows namely a volume whose file system is FAT16 FAT32 or NTFS The change will affect only the Windows operating system whose disk layout is currently selected by default the currently running Windows operat
147. ucture marking them with an icon in the upper right corner of its rectangle Make certain that all the selected volumes are properly placed in the hard disk structure and then click Next Click Proceed to start recovering the volumes 8 Acronis OS Selector Acronis OS Selector is a powerful reliable and easy to use boot manager that allows several operating systems on a single machine and lets you create different configurations for any installed operating system including Windows 7 With Acronis OS Selector you can Install several different operating systems on a single machine Load installed operating systems from any basic MBR disk volume or boot the machine from CD DVD Load installed operating systems from under Windows Install several operating systems on a single volume Hide or protect any operating system on your machine with a password Duplicate installed operating systems and define different configurations for each copy In this section Starting the WOFk tiere a 58 Setting the bootimenlu iu oe sce ins 59 OperatlOlns u t emer teer E EY ee e eoe esee Ex E eee ea 59 Editing operating systems esses nennen enema 63 Detecting operating systems esses eene nnne nnne 65 Setting Acronis OS Selector Options cccssccccccecesssssseceeecessessssaeeeeeens 65 Installing and using several operating systems on a single machine 67 8 1 1 Starting the work After Ac
148. vely cancel them 6 10 Removing a missing disk The Missing status occurs on a dynamic disk when the disk has been corrupted turned off or disconnected The Logical Disk Manager LDM database keeps information about the missing disk because such disk might contain parts of dynamic volumes such as mirrored volumes that can be repaired If the disk can be reconnected or turned on all you need to recover its functionality is to reactivate the disk For information on how to bring a disk that is offline and missing back online please refer to the following Microsoft knowledge base article http technet microsoft com en us library cc732026 aspx If the missing disk cannot be reactivated or you would like to completely delete this disk from disk group you can remove the disk from the LDM database Before removing a missing disk you have to delete p 31 all the volumes on the disk However if the disk contains any mirrored volumes you can save them using the Remove mirror p 36 operation instead of deleting the entire volume To remove a missing dynamic disk 1 Right click the disk with the Missing status and then click Remove missing disk 2 Click OK to add the pending disk removal operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operatio
149. volume label to the other volume This operation differs from removing a mirror see Remove mirror p 36 in that when you remove a mirror only the remaining mirror becomes a simple volume You can break a mirrored volume only when the disks containing both of its mirrors are online To break a mirrored volume 1 Right click the mirrored volume that you want to break and then click Break mirror 2 For one of the two mirrors specify the volume label and or drive letter that the mirror will have when it is converted to a volume To not assign a drive letter to the volume click Do not assign the letter The other mirror will be assigned the drive letter and volume label of the original mirrored volume 3 Click OK to add the pending mirrored volume breaking operation The results of the pending operation are immediately displayed as if the operation had been performed To perform the pending operation you will have to commit it p 20 Exiting the program without committing the pending operations will effectively cancel them 5 18 Browsing a volume s content Before configuring any operations on a volume we recommend you to view its contents to make sure you choose the right volume It can be especially useful in cases when a volume cannot be seen by Windows Explorer for example a volume with Linux file systems or when running Acronis Disk Director from bootable media where there are no tools to view what is exactly stored o
150. wever continue until all the remaining disks are scanned Only after the search is completed the Next button becomes enabled and you can proceed to the next window Note you cannot select volumes to recover in the automatic mode Acronis Recovery Expert will recover all the discovered deleted volumes If the search is completed with no result you will be asked to either perform the search using the Complete method or to finish searching and close the application With the complete method the program scans each sector on every hard disk It is more thorough and may take a long time to perform If there are no volumes found with the complete method you will be asked to close the Recovery Expert 3 The Recovered Volumes window displays the volumes to recover as a part of the hard disk volume structure Make sure that all the required volumes are properly placed in the hard disk structure and then click Next 4 Click Proceed to start recovering the volumes Recovering volumes in manual mode The manual recovery mode lets you take full advantage of the volume recovery You will be able to specify the searching method disks to search on and volumes to recover 1 Inthe Recovery mode window choose Manual 2 Inthe Unallocated Space Selection window select unallocated space on basic disks where the deleted volumes used to be located If you are not sure about the location of the deleted volumes select all the unallocated spaces on

Acronis Disk Director 11 Home

Contents

Download Pdf Manuals

Related Search

Related Contents