Siig USB SoundWave 7.1 Pro
Contents
1. updated daily with new drivers and solutions Answers to your questions could be just a few clicks away You can also submit questions online and a technical support analysts will promptly respond SIIG offers a 5 year manufacturer warranty with this product Please see our web site for more warranty details If youencounter any problems with this product please follow the procedures below If it is within the store s return policy period please return the product to the store where you purchased from If your purchase has passed the store s return policy period please follow these steps to have the product repaired or replaced Step 1 Submit your RMA request Go to www siig com click Support then RMA to submit a request to SIG RMA Your RMA request will be processed if the productis determined to be defective an RMA number will be issued Step 2 After obtaining an RMA number ship the product e Properly pack the product for shipping All accessories that came with the original package must be included e Clearly write your RMA number on the top of the returned package SIIG will refuse to accept any shipping package and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton e Youare responsible for the cost of shipping Ship the product to the following address SIIG Inc 6078 Stewart Avenue Fremont CA 94538 3152 USA RMA e SIIG will ship the repaired or r2. volume Supports analog speakers only Audio Out Connect headphones or stereo speakers via mini 3 5mm stereo plug Doubles as anS PDIF Optical out when used with the included S PDIF Optical adapter Volume Mute Press this button to turn off the system sound Press the button again to turn on the system sound pause for several seconds between button presses Supports analog speakers only Microphone Line In Mute Press this button to mute Microphone Line In Press the button again to turn on Microphone Line In Microphone Line In Connects MP3 players CD players iPods and other audio output devices for playback or recording connect a microphone and turn your system into a P A or Karaoke system Note Playback P A and Karaoke supports analog speakers only Power Activity LED The light will be on when the system is powered up The light will blink when activity is detected however the lightis not affected by Microphone Line In inputs Microphone LED When the Microphone Line In is muted the light will turn on USB Connector Plugs into the system s USB port Software Installation Windows will automatically install it s built in driver for the USB SoundWave 7 1 Pro when connected To get Xear 3D Audio Utility Mixer Equalizer Optical S PDIF and simulated 7 1 channel sound from headphones or stereo speakers install the Xear 3D software and driver from the CD Plug in the USB SoundWave 7 1 Pro and allow the Windows driv
3. IBLE FOR PRODUCT COMPLIANCE SIG Inc 6078 Stewart Avenue Fremont CA 94538 3152 USA Phone 510 657 8688 USB SoundWave 7 1 Pro is a trademark of SIIG Inc SIIG and the SHG logo are registered trademarks of SHG Inc Microsoft and Windows are registered trademarks of Microsoft Corporation All other names used in this publication are for identification only and may be trademarks of their respective owners February 2010 Copyright 2010 by SHG Inc All rights reserved
4. USB SoundWave 7 1 Pro AA J Quick Installation Guide Introducing the USB SoundWave 7 1 Pro The USB SoundWave 7 1 Prois a portable sound card that brings a home theater atmosphere to notebook or desktop computers Features and Benefits Optical S PDIF output provides true 7 1 channel surround sound requires DVD playback software S PDIF decoder and 7 1 ch speakers Provides simulated 7 1 channel surround sound to headphones or stereo speakers via Speaker Shifter application Supports EAX 2 0 A3D 1 0 and Microsoft DirectSound 3D Xear 3D software offers 27 environment effects 3 environment sizes plus a 10 band equalizer with pre sets or manual configuration Serial Number Sticker For future product return or exchange this serial number is required Please keep it for your reference 04 0446D j X 1 Requirements Pentium II 350 MHZ or equivalent PC 128MB RAM and an available USB port Windows 7 32 64 bit Vista 32 64 bit XP 32 64 bit Server 2003 amp 2008 32 64 bit 2000 Package Contents USB SoundWave 7 1 Pro S PDIF Optical adapter and USB extension cable Software CD Quick installation guide Layout Microphone Line In LED USB Connector Power Activity LED Volume Control Microphone Line In Mute Audio Out Volume Mute Microphone Line In Figure 1 Layout Note See page 3 for description of each label Volume Increases or decreases the system
5. click the Speakers tab 5 Select your speaker type from the drop down list 6 Click OK to save the settings Windows Server 2003 Make sure to log in as Administrator or an account with administrative privileges 1 From the main desktop click Start Control Panel 2 Click Sounds and Audio Devices 3 Select the Audio tab 4 Click Advanced under Sound Playback then click the Speakers tab Ds Select your speaker type from the drop down list 6 Click OK to save the settings Windows 2000 1 From the main desktop click Start Settings Control Panel 5 Double click Sounds and Multimedia click Audio tab Click Advanced under Sound Playback then click the Speakers tab Select the speaker type from the drop down list Click OK to save the settings Microphone Configuration Windows 7 Vista Server 2008 1 oot a 10 Right click the volume control icon located in the taskbar by the system clock Click Playback Devices under the Playback tab select Speakers USB PnP Sound Device click Properties Click the Levels tab Click the speakericon to either enable or mute the microphone as indicated by the red circle muted next to the icon Move the slider to change the volume level Click OK to save the changes Click the Recording tab Select Microphone USB PnP Sound Device click Properties Click the Levels tab Move the slider to the left to increase sensitivity Click OK to save the cha
6. eplaced product via Ground in the U S and International Economy outside of the U S at no cost to the customer 11 About SIIG Inc Founded in 1985 SIIG Inc isa leading manufacturer of IT connectivity solutions including Serial ATA and Ultra ATA Controllers FireWire USB and legacy I Oadapters that bridge the connection between Desktop Notebook systems and external peripherals SIIG continues to grow by adding A V and Digital Signage connectivity solutions to our extensive portfolio SIIG products offer comprehensive user manuals many user friendly features and are backed by an extensive manufacturer warranty High quality control standards are evident by the overall ease of installation and compatibility of our products as wellas one of the lowest defective return rates in the industry SIIG products can be found in computer retail stores mail order catalogs through major distributors system integrators and VARs in the Americas and the UK and through e commerce sites PRODUCT NAME USB SoundWave 7 1 Pro FCC RULES TESTED TO COMPLY WITH FCC PART 15 CLASS B OPERATING ENVIRONMENT FOR HOME OR OFFICE USE FCC COMPLIANCESTATEMENT This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation THE PARTY RESPONS
7. er to load before inserting the software CD Windows 7 1 Insert the software CD AutoPlay should start the installation At the AutoPlay box Click Open folder to view files Double click Win7 folder then double click Setup If AutoPlay doesn t start Click Start in Search programs and files type D Win7 setup exe then press Enter Change D to match your CD DVD ROM drive letter At User Account Control click Yes Select Yes I want to restart my computer now then click Finish Windows Vista Server 2008 1 Insert the software CD AutoPlay should start the installation At the AutoPlay box Click Run Setup exe IfAutoPlay doesn t start Click Start in Start Search type D setup exe then press Enter Change D to match your CD DVD ROM drive letter For Windows Vista Click Allow For Server 2008 Continue to step 3 Select Yes I want to restart my computer now then click Finish Windows XP Server 2003 2000 1 Insert the software CD Autorun should start the installation If Autorun doesn t start click Start then Run Type D setup exe then click OK Change D to match your CD DVD ROM drive letter Click Next Next Select Yes I want to restart my computer now then click Finish To Verify Installation 1 Check Device Manager for proper installation For Windows 7 Right click Computer click Manage click Device Manager For Windows Vista Right click Com
8. nges 11 Click the Custom tab 12 Check Microphone Boost click OK Note Microphone Boost increases sensitivity by approximately 20dB This setting is optional and not be needed in most cases Uninstalling the Soundcard Driver Windows 7 Click Start Control Panel Click Programs Click Programs and Features Select USB PnP Sound Device then click Uninstall Change EN a 5 Select Yes I want to restart my computer now and click Finish Windows Vista Server 2008 1 Click Start Control Panel 2 Click Classic View double click Programs and Features 3 Select USB PnP Sound Device then click Uninstall Change Windows Vista Click Continue Windows Server 2008 Continue to step 4 4 Select Yes I want to restart my computer now and click Finish Windows XP Server 2003 1 Click Start 2 Click Control Panel double click Add Remove Programs 3 Select USB PnP Sound Device then click either Change Remove or Add Remove 4 Follow the on screen instructions to complete Windows 2000 1 Click Start 2 Select Settings 3 Click Control Panel double click Add Remove Programs 4 Select USB PnP Sound Device then click either Change Remove or Add Remove 5 Follow the on screen instructions to complete Technical Support and Warranty QUESTIONS SIIG s Online Supporthas answers Simply visit our web site at www siig com and click Support Our online support database is
9. puter click Manage click Continue click Device Manager For Windows XP Server 2003 2000 Right click My Computer click Manage click Device Manager For Server 2008 Right click Computer click Manage double click Diagnostics click Device Manager 2 Double click Sound video and game controllers With Xear 3D driver USB PnP Sound Device willbe displayed With Windows built in driver Either USB Audio Device or C Media USB Headphone Set will be displayed Xear 3D Audio Configuration Utility The USB PnP Sound Device quick start icon located in the taskbar by the clock starts automatically when Windows boots Simply click on the quick start icon to open it Enable Disable Optical S PDIF Output The Optical S PDIF out is enabled by default 1 Click on the Xear 3D quick start icon 2 From the Main Settings tab click on the radial button next to S PDIF Output Speaker Configuration Windows 7 Vista Server 2008 Make sure to log in as Administrator or an account with administrative privileges 1 Right click the volume control icon located in the taskbar by the system clock 2 Click Playback devices select Speakers USB PnP Sound Device click Configure i Follow the on screen instructions to configure your speakers Windows XP 1 From the main desktop click Start Control Panel 2 Click Sounds and Audio Devices 3 Select the Audio tab 4 Click Advanced under Sound Playback then
Download Pdf Manuals
Related Search