Home

Whirlpool AWOE 9558

image

Contents

1. Appliance does not start although Start Pause has been pressed Door is not properly closed see also Child Safety The Child lock Lock buttons feature has been activated O if available on your model To unlock the buttons push the two buttons marked with the key symbol simultaneously and hold them at least for 3 seconds The key symbol on the display disappears and the programme can be started Appliance stops during the programme and the Start Pause light blinks Rinse hold position of the Variable spin button is activated and the Rinse hold symbol T lights up in the programme sequence indicator Press the Start Pause button to start the drain programme Programme has been changed reselect desired programme and press Start Pause Programme has been interrupted and eventually door has been opened close door and restart programme by pressing Start Pause The appliance s safety system has been activated see Description of red indications in your programme chart Water tap is not opened or water inlet hose is kinked or blocked Water tap closed indication lights up Detergent dispenser contains residues from detergent and or additives Appliance vibrates during spin cycle Separator in main wash chamber is not correctly installed or not adapted to use of powder and liquid detergent see Detergents And Additives Water enteri
2. Packaging e The packaging material is entirely recyclable and marked with the recycling symbol y Adhere to current local regulations when disposing of packaging material 3 Disposing of packaging and scrapping old washing machines The washing machine is built from reusable materials It must be disposed of in compliance with current local waste disposal regulations Before scrapping remove all detergent residues and cut off the power cable so that the washing machine is made unusable This appliance is marked according to the European directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The symbol a on the product or on the documents accompanying the product indicates that this appliance may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal For more detailed information about treatment recovery and recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product 4 Energy saving The water
3. consumption of your washing machine is optimized in some programmes you therefore cannot see the water through the door glass when the machine is in operation e Achieve the best use of energy water detergent and time by using the recommended maximum load size Do not exceed the detergent dosages indicated in the manufacturer s instructions The Eco Ball a special system in the outlet will prevent detergent loss from the drum to avoid detergent loss into the environment Use Prewash if available on your model for heavily soiled laundry only Save detergent time water and energy consumption by not selecting Prewash for slightly to normally soiled laundry Pretreat stains with stain remover or soak dried in stains in water before washing to reduce the necessity of a hot wash programme Save energy by using a 60 C instead of a 95 C wash programme or a 40 C instead of a 60 C wash programme Save energy and time by selecting a high spin speed to reduce the water content in laundry before using a tumble dryer 5 EC Declaration of Conformity e The appliance conforms to the following European Standards 2006 95 EC Low Voltage Directive 2004 108 EC Electromagnetic Compatibility Directive GB 3 DESCRIPTION OF THE WASHING MACHINE Worktop Control panel Detergent dispenser Service plate inside the door Door Pump access filter behind plinth and emergency hose dependin
4. have an effect on the wash programme time e g Excess of foam formation load imbalance due to heavy items of laundry prolonged heating time resulting from reduced inlet water temperature Due to such influences the programme time is recalculated and updated if necessary On the display an animation appears during such update periods GB 10 Description of red indications Red indication lights up Indication on big display if available on your model Description Causes Solutions Z gt Water tap closed 9 Appliance has no or insufficient water supply The Start Pause light blinks Check whether e Water tap is fully open and water supply pressure is sufficient Kinks are present in the water inlet hose Mesh filter of water supply hose is blocked see Care And Maintenance The water hose is frozen up The safety valve inspection window of your water supply hose is red provided your appliance has a water supply hose as shown on picture B see previous chapter C are And Maintenance replace the hose by a new one available through our After Sales Service or your specialist dealer After problem has been removed restart programme by pressing Start Pause If the fault occurs again contact our After Sales Service see next chapter Clean pump W aste water is not pumped out The appliance stops in the corresponding programme step unplug it and chec
5. used and should be discarded 5 Drain e Connect the drain hose to the siphon or hook it over the edge of a sink by means of the U bend supplied e If the washing machine is connected to an integrated drainage system ensure the latter is equipped with a vent to avoid simultaneous loading and draining of water siphoning effect 6 Electrical connection e Electrical connections must be carried out by a qualified technician in compliance with the manufacturer s instructions and current standard safety regulations e Data regarding voltage power consumption and protection requirements is given on the inside of the door e The appliance must be connected to the mains by means of a socket with an earth connection in accordance with current regulations The washing machine must be earthed by law The manufacturer declines all liability for damage to property or injury to persons or animals due to non compliance with the directions given above e Do not use extension leads or multiple sockets e Before any maintenance on the washing machine disconnect it from the mains supply e After installation access to the mains plug or to disconnection from mains supply must be ensured at all times via a double pole switch e Do not operate the washing machine if it has been damaged during transport Inform the After Sales Service e Mains cable replacement is only to be carried out by After Sales Service e The appliance must only be
6. CONTENTS DEFINITION OF USE BEFORE USING THE WASHING MACHINE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE DOOR BEFORE THE FIRST WASH CYCLE PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES DRAINING RESIDUAL WATER REMOVING THE FILTER CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER SALES SERVICE ACCESSORIES TRAN SPORT HANDLING ELECTRICAL CONNECTION DEFINITION OF USE This washing machine is exclusively destined to wash machine washable laundry in quantities which are usual for private households e Observe the instructions given in these Instructions for Use the Installation Guide and the Programme Chart when using the washing machine e Keep these Instructions for Use the Programme Chart and the Installation Guide if you pass on the washing machine to another person also give him her Instructions for Use Programme Chart and Installation Guide BEFORE USING THE WASHING MACHINE 1 Removing the packaging and inspection e After unpacking make sure that the washing machine is undamaged If in doubt do not use the washing machine C ontact After Sales Service or your local retailer e Keep the packaging materials plastic bags polystyrene parts etc out of reach of children as they are potentially dangerous e Ifthe appliance was exposed to the cold prior to delivery keep it at room temperature for a few hours before operating 2 Remove the transport bolts e The washi
7. dealer If your supply hose has a transparent hose coating fig C periodically check the colour of the transparent coating If the transparent hose coating turns into an intense red this is an indication that the hose may have a leak and should be replaced Contact our After Sales Service team or specialist dealer to obtain a replacement hose Cleaning the mesh filter in the water supply hose s 1 2 3 Pull off the mesh filter from the washing machine connection ul Refit the mesh filter and screw the inlet hose on again Turn on the tap and ensure that the connections are completely Close the tap and loosen the inlet hose on the tap Clean the internal mesh filter and screw the water inlet hose back onto the tap N ow unscrew the inlet hose on the rear of the washing machine with universal pliers and clean it water tight GB 9 TROUBLESHOOTING GUIDE Your washing machine is equipped with various automatic safety functions These enable faults to be detected in good time and the safety system can react appropriately These faults are frequently so minor that they can be removed within a few minutes Problem Causes Solutions Tips Appliance does not start no indicator lamps are on Plug is not properly inserted in socket Socket or fuse does not function correctly use a table lamp or similar appliance to test it the O n O ff button has not been pressed if available on your model
8. er has three chambers fig A Prewash Chamber Detergent for the prewash Main Wash Chamber I Detergent for the main wash e Stain remover e Water softener Softener Chamber e Fabric softener e Liquid starch Pour additives only up to the MAX mark Using chlorine bleach e Wash your laundry in the desired programme Cotton Synthetics adding an appropriate amount of chlorine bleach to the SO FTEN ER chamber close the detergent dispenser carefully Immediately after end of programme start the Rinse and Spin programme to eliminate any residual bleach smell if you want you can add softener Never put both chlorine bleach and softener into the softener chamber at the same time Using starch Select the Rinse and Spin programme and check that the spin speed is adjusted to not more than 800 rpm e Start the programme pull out the detergent dispenser so that you can see approximately 3 cm of the softener chamber e Pour the starch solution prepared into the softener chamber while the water is running into the detergent dispenser How to position the separator in the main wash chamber for powder or liquid detergent For use with powder detergent place the separator in the higher position Lift the separator until its top can be reclined Place its hooks on the upper end of the back guide rails and slightly push the separator down to fix it fig C A gap should remai
9. fuse cover A and fuse B 2 Fit replacement 13A fuse into fuse cover 3 Refit both into plug Important The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug Replacement fuse covers are available from your local electrical store For the Republic of Ireland only The information given in respect of Great Britain will frequently apply but a third type of plug and socket is also used the 2 pin side earth type Socket outlet plug valid for both countries If the fitted plug is not suitable for your socket outlet Please contact After Sales service for further instruction Please do not attempt to change plug yourself T his procedure needs to be carried out by a qualified technician in compliance with the manufactures instructions and current standard safety regulations GB 14
10. g on the model Adjustable feet DOOR To open the door hold the door handle and pull the door Close the door by pressing it without excessive force until it clicks shut BEFORE THE FIRST WASH CYCLE To remove any residual water used in testing by the manufacturer we recommend that you carry out a short wash cycle without laundry 1 Open the tap 2 Close the door 3 Pour alittle detergent about 30 ml into the main wash chamber uij of the detergent dispenser 4 Select and start a short programme see separate Programme Chart GB 4 NOURBWNPE PREPARATION OF THE WASHING 1 Sort the laundry according to e Type of fabric care label symbol Cottons mixed fibres easy care synthetics wool handwash items Colour Separate coloured and white items W ash new coloured articles separately Size W ash items of different sizes in the same load to improve washing efficiency and distribution in the drum Delicates Wash small items e g nylon stockings belts etc and items with hooks e g bras in a cloth bag or pillow case with zip Always remove curtain rings or wash curtains with the rings inside a cotton bag 2 Empty all pockets Coins safety pins etc can damage your laundry as well as the appliance drum and tub 3 Fasteners Close zips and fasten buttons or hooks loose belts or ribbons should be tied together Stain removal e Blood milk eggs etc are generally removed by the automatic enzy
11. k whether e Kinks are present in the drain hose or the hose is blocked for another reason e Filter or pump is blocked see chapter Draining Residual W ater RemovingT he Filter make sure the water has cooled before draining the appliance e The drain hose is frozen up After problem has been removed push the Reset button for at least 3 seconds afterwards restart the desired programme If the fault occurs again contact our After Sales Service see next chapter GB 11 Red indication lights up Indication on display Description Causes Solutions Service from F02 to F35 except F24 from F40 to F43 F24 F02 or FA Fod Electrical module fault Push the Reset button for at least 3 seconds Electrical module fault Make sure that the water tap is open If yes e Switch the washing machine off by turning the programme selector to the O ff O position then turn the programme selector to a wash programme again If there is still a failure e Push the Reset button for at least 3 seconds Water level too high after programme cancellation or false operating Switch off the washing machine by turning the programme selector to the Off O position Turn the programme selector to a wash programme again shortly press the Reset Drain button and press Start Pause within 15 second
12. me phase of the programme e To remove red wine coffee tea grass and fruit stains etc add a stain remover to the main wash chamber uij of the detergent dispenser e Pre treat heavily soiled areas with stain remover if necessary Dyeing and bleaching e Only use dyes and bleaches that are suitable for washing machines e Follow the Manufacturer s instructions e Plastic and rubber parts of the washing machine can be stained by dyes or bleaches Loading the laundry 1 0 pen the door 2 Load the articles one at a time loosely into the drum without overfilling O bserve the load sizes given in the programme chart Note overloading the machine will result in unsatisfactory washing results and creased laundry 3 Close the door DETERGENTS AND ADDITIVES Keep detergents and additives in a safe dry place out of the reach of children The choice of detergent depends on e Type of fabric cottons easy care synthetics delicate items wool Note U se only specific detergents for washing wool and garments made of microfibres like sports or swimwear e Colour e The wash temperature e Degree and type of soiling Remarks e Any whitish residues on dark fabrics are caused by insoluble compounds used in phosphate free powder detergents If this occurs shake or brush out the fabric or use liquid detergents Use only detergents and additives specifically produced for domestic washing machines When using descaling agents dyes o
13. n between the separator and the bottom of the main wash chamber if the separator has been correctly installed fig B and C For use with liquid detergent place the separator in the lower position Secure the separator in the chamber using the front guide rails Position the separator so that it touches the bottom of the main wash chamber uij fig D GB 6 Separator DRAINING RESIDUAL WATER REMOVING THE FILTER We recommend that you check and clean the filter regularly at least two or three times a year Especially e Ifthe appliance is not draining properly or if it fails to perform spin cycles e Ifthe Clean pump indication lights up IMPORTANT make sure the water has cooled before draining the appliance If your washing machine has an emergency hose drain the appliance as described at the end of this page 1 Stop the appliance and unplug it 2 Push the pins right and left to release the plinth and remove it see picture A 3 Place abroad and flat container beneath the filter on the right 4 Open the filter but do not remove it completely Slowly turn the filter counterclockwise fig B until the water begins to drain out Wait until all the water has drained 6 Now unscrew the filter completely and remove it 7 Tilt the appliance forwards carefully to allow the water to flow out completely 8 Clean the filter and the filter chamber 9 Check that the pum
14. ng is not enough the mesh filters of the water supply could be blocked see Care And Maintenance Transport bolts have not been removed before using the washing machine it is imperative that the transport bolts are removed Appliance is not level not standing firmly on all four feet see separate Installation Guide Final spin results are poor Detergent residues on laundry after wash Programme time initially displayed is lengthened shortened by a period of time only for appliances having a display which indicates the remaining programme time The appliance has an imbalance detection and correction system If individual heavy items are loaded e g bathrobes this system may reduce the spin speed automatically or even interrupt the spin completely in order to protect the washing machine e Heavy item s prevented spinning add smaller articles of laundry and repeat spin cycle e Excessive foam formation prevented spinning select and start Rinse amp Spin programme Avoid excessive detergent dosing see Detergents And Additives e Variable spin button has been set to alow spin speed Whitish residues on dark fabrics are caused by insoluble compounds used in phosphate free powder detergents avoid overdosing of detergent use liquid detergent select Intensive Rinse option if possible brush out the fabric Normal capacity of the appliance to adapt to factors that can
15. ng machine is fitted with transport bolts to avoid any possible damage to the interior during transport Before using the machine it is imperative that the transport bolts are removed e After their removal cover the openings with the 4 enclosed plastic caps 3 Install the washing machine e Remove the protective film from the control panel if available on your model e Move the appliance without lifting it by the worktop e Install the appliance on a solid and level floor surface preferably in a corner of the room e Make sure that all four feet are stable and resting on the floor and then check that the washing machine is perfectly level use a spirit level e In case of wooden or so called floating floors for instance certain parquet or laminate floors place the appliance on a 60 x 60 cm sheet of plywood at least 3 cm in thickness which is secured to the floor e Make sure that the ventilation openings in the base of your washing machine if available on your model are not obstructed by a carpet or other material 4 Water inlet e Connect the water supply inlet hose in accordance with the regulations of your local water company e Water inlet Cold water only if no other information on your programme chart e Water tap 3 4 threaded hose connector e Water pressure flow pressure 100 1000 kPa 1 10 bar e Use only new hoses to connect the washing machine to the water supply Used hoses must not be
16. p rotor inthe filter chamber moves freely 10 Re insert the filter and screw it in clockwise as far as it will go 11 Pour about 1 litre of water into the detergent drawer to reactivate the Eco system Check that the filter is inserted properly and securely 12 Re install the plinth 13 Plug in the appliance again The washing machine is now ready for operation again For models with emergency hose Remove the plinth as described above for draining the water e Pull out the emergency hose from the washing machine s base e Place a container next to the emergency hose which can be reached by the hose length e Remove the stopper from the hose so that the water can flow into the container e Proceed to clean the filter as described above e Refix the stopper and push the hose back into the washing machine base a CARE AND MAINTENANCE Appliance exterior and control panel e Can be washed down with a soft damp cloth e A little neutral detergent non abrasive can also be used e Dry with a soft cloth Appliance interior e After each washing leave the door open for some time to allow the inside of the appliance to dry e If you never or seldom wash your laundry at 95 C we recommend to occasionally run a 95 C programme without laundry adding a small amount of detergent to keep the interior of the appliance clean Door seal e Dry the door seal after each washing with an absorbent cotton clo
17. r bleaches for the prewash if available on your model make sure that they are suitable for use in domestic washing machines D escalers could contain products which could damage your washing machine Do not use any solvents e g turpentine benzine Do not machine wash fabrics that have been treated with solvents or flammable liquids e Do not use liquid detergent for the main wash when having activated the prewash option if available on your model e Do not use liquid detergent when activating the Start Delay function Dosage Follow the dosage recommendations on the detergent pack They depend on e degree and type of soiling size of wash full load follow the detergent manufacturer s instructions half load 3 4 the amount used for a full load Minimum load about 1 kg 1 2 the amount used for a full load water hardness in your area ask for information from your water company Soft water requires less detergent than hard water refer to the water hardness table in the operating instructions Notes Too much detergent can result in excess foam formation which reduces washing efficiency If the washing machine detects too much foam it may prevent spinning or prolong the programme duration and increase the water consumption Insufficient detergent may result in grey laundry and also calcifies the heating system drum and hoses GB5 Where to put detergent and additives The detergent draw
18. rea code After Sales Service phone numbers and addresses are given on the guarantee card Alternatively consult the dealer where you purchased the appliance ACCESSORIES For some models you can obtain via our After e a Stacking Kit Shelf by which your dryer can Sales Service or your specialist dealer be fixed on top of your washing machine to save e a Pedestal Drawer which can be installed space and to facilitate loading and unloading your beneath your washing machine It raises your dryer in that high position machine to allow for more comfortable loading and unloading as you now no longer need to bend as far to access the door Furthermore it offers a great space management tool and storage solution TRAN SPORT HANDLING Never lift the appliance by the worktop when transporting Pull out the mains plug Turn off the tap Check that machine door and detergent dispenser are properly closed Disconnect the inlet and drain hoses Eliminate all water from the hoses and from the appliance see Draining Residual W ater Removing The Filter 6 Fit the transport bolts obligatory ukhWN GB 13 ELECTRICAL CONNECTION For Great Britain only Warning this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug to change a fuse in this type of plug use an A S T A approved fuse to BS 1362 type and proceed as follows 1 Remove the
19. s to start the Drain programme Waterstop fault Turn the programme selector to the O ff O position pull out the mains plug and turn the water tap off Tilt the appliance forward carefully to allow collected water to flow out from the bottom Then e Plugin the appliance again e Turn the water tap on if water immediately flows into the appliance without the appliance being started there is a failure turn off the tap and notify the After Sales Service e Select and start the desired programme again Overfoaming Too much foam interrupted the wash programme e Select and start the Rinse amp Spin programme e Afterwards select and start the desired programme again using less detergent If any of the faults described above persist unplug the appliance turn off the water tap and contact our After Sales Service see next chapter GB 12 AFTER SALES SERVICE Before contacting After Sales Service Specify 1 T ry to remedy the problem yourself see e The nature of the problem Troubleshooting Guide e The washing machine model 2 Restart the programme to check whether the e The service code number after the word problem has solved itself SERVICE 3 If the washing machine continues to function SAAK 0000 000 00000 incorrectly call our After Sales Service I N The After Sales Service sticker can be found inside the door e Your full address e Your telephone number and a
20. th make sure that the door seal is completely dry before closing the door of the empty washing machine e Check the condition of the door seal periodically Filter e Check and clean the filter regularly at least two or three times a year see D raining Residual Water Removing The Filter Water supply hose s e Check the hose s regularly for brittleness and cracks e Regularly check and clean the mesh filter inside the inlet hose see Cleaning the mesh filter in the water supply hose s Do not use flammable fluids for cleaning the appliance Detergent dispenser Clean the dispenser drawer and the dispenser compartment regularly at least three or four times a year to prevent detergent build up To clean the dispenser drawer 1 Press the release lever in the main wash chamber downward and remove the dispenser drawer from the dispenser compartment A see downward arrow 2 Remove the cover grid from the softener chamber Remove the a separator from the main wash chamber by pulling it upward see upward arrows 3 Wash all the parts under running water 4 Clean the dispenser compartment with a damp cloth 5 Refit the separator and the cover grid in the dispenser drawer and push the drawer back into the dispenser compartment GB8 Water supply hose s If a supply hose shows a damage replace it by a new hose of the same type available through our After Sales Service or your specialist
21. used in the household for the prescribed uses Minimum housing dimensions Width 600 mm H eight 850 mm Depth 600 mm GB2 PRECAUTIONS AND GENERAL RECOMMENDATIONS 1 Safety instructions e The washing machine is appropriate for indoor use only Do not store flammable fluids near the appliance Children must be supervised to ensure that they do not play with the appliance This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety If you want to place a dryer on top of your washing machine first contact our After Sales Service or your specialist dealer to verify if this is possible Placing a dryer on your washing machine is only admitted if the dryer is fixed on the washing machine by using an appropriate stacking kit available through our After Sales Service or your specialist dealer Do not leave the appliance plugged in when not in use Turn off the tap when not in use Before any cleaning and maintenance switch off the machine or disconnect it from the mains N ever open the door forcibly or use it as a step If necessary the power cable may be replaced with an identical one obtained from our After Sales Service The power cable must only be replaced by a qualified technician 2

Download Pdf Manuals

image

Related Search

Related Contents

ASUS H81M-C/CSM C8447 User's Manual  User Manual - D-Link  CATALOGUE 2015  manual de instalação, .uncionamento e manutenção da roo  to DSR160ASI HD  サーモアイ シリーズ(屋根 遮熱塗料)  URGENT – Notice corrective de matériel médical  

Copyright © All rights reserved.
Failed to retrieve file