Alpine KCE-400BT
Contents
1. CDE 101 Series CDE 102 Series CDE W203 Series CDA 105 Series iDA X301 Series iDA X303 Series iDA X305 Series Bluetooth compatible Unit Sold separately AMAPINE_ iPod UNITS m SACH f iPhone iPod Sold separately A 1 If the Bluetooth INTERFACE is i i i connected you cannot use a i device connected to the INT lead 1 voice interruption etc Fuse 7 5 a fe Less To Full Speed connector Bluetooth Audio Interrupt Out lead Pink Black INTERFACE connector Be sure to connect only when power is turned off Bluetooth INTERFACE Cable Included as a malfunction may result The FULL SPEED Connection Cable Audio Interrupt In lead Pink Black KCE 433iV may be supplied with the head ACC Ignition lead Red unit If not purchase separately To the ACC Power lead This connection can be made only for the CDE 101 Series Battery lead Yellow CDE 102 Series iDA X301 Series CDE W203 Series For Connect this lead to a terminal that constantly details refer to the Owner s Manual of the Bluetooth provides power to the positive post of the compatible head unit battery An iPhone cannot be connected for iDA X301 Series Ground lead Black Microphone Included Connect to a metal part of chassis body with screw Je Connections for the head unit with2. Redial Function You can redial the person you have previously called After finishing a call press _ or N within 5 seconds The telephone is redialed Audio Switching Operation CD Head Unit Only While making a call this function allows you to initiate the transfer of the audio between the mobile phone and the speakers in the car While calling press and hold ENT for at least 2 seconds to switch the call sound between the speakers in car and mobile phone e Depending on the mobile phone this operation may not be performed Call History Call History is recorded for the last dialed received missed calls There are various ways of making calls based on the Call History The following steps 1 to 4 are common to the various ways of making these calls For details refer to each individual category for making calls 1 Press ors The outgoing method list is displayed 2 Turn the Rotary encoder or the Double Action encoder to select the outgoing mode Setting items DIALED RECEIVED MISSED PHONE BOOK DIALED Dialed history RECEIVED Received history MISSED Missed incoming history PHONE BOOK Mobile phonebook The adapter will update the information in the Call History automatically each time a mobile phone is connected or receiving dialing a call At this time if you select any outgoing mode UPDATING will be displayed 3 Press ENT The outgoing mode is activated and each m
3. Alpine dealer or Alpine support for your country 3iXA W404E iDA X305 303 CDE W203E CDE 105E CDE 102E CDE 101E EM For Chinese users Future Bluetooth firmware update for phone compatibility at customer end will be available for Alpine products listed at For information to update your Bluetooth firmware please visit Alpine China home page http www alpine com cn For the products which are NOT listed at please contact your local official Alpine dealer or Alpine support for China 4 iIXA W404E iDA X305 CDE 105E CDE 102E CDE 101E 5 EN Hands Free Phone Control About the Hands Free Phone Hands free calls are possible when using a HSP Head Set Profile and HFP Hands Free Profile compatible mobile phone with a ALPINE Bluetooth compatible CD Head Unit or Digital Media Receiver Avoid performing a hands free call in heavy traffic or on narrow or winding streets e Close the windows while calling to reduce background noise If both calling parties are using hands free devices or the call is made in a noisy location difficulty hearing the other person s voice is normal Depending on telephone line conditions or certain mobile devices used voices may sound unnatural When using a microphone speak as directly as you can into the microphone to pick up the best sound quality e Certain mobile phone features are dependent on the capabilities and settings of your service pro
4. adapter communication is canceled To resume communication repeat Steps 1 through 3 above How to connect to a Bluetooth compatible device Pairing For details on the control from a Bluetooth compatible device refer to the Owner s Manual of the Bluetooth compatible device 1 2 3 4 Set a Bluetooth connection from a Bluetooth compatible device The PIN code 0000 is displayed on the connected unit The PIN code is fixed as 0000 Input the PIN code 0000 in a Bluetooth compatible device If the connected unit is successfully connected to a Bluetooth compatible device a paired device name is displayed on the unit and then the unit returns to normal mode The registration number 5 is the guest mode Content that is registered as the guest mode is deleted when you set ignition from ACC to OFF Ifall the 5 positions including guest mode have been registered you cannot register the 6th device To register another device you need to delete one of the device from position to 5 first If a Bluetooth compatible device is successfully connected the next time when the ignition key of the car is turned to on the unit will automatically connect to the previously connected device However the connection may fail If the auto connection fails try the connection manually Set Setting the Search Mode page 4 to ON to enable the KCE 400BT to recognize a mobile phone For mobile phone passkey
5. connected ID UNSENT will be displayed e Depending on the character type some phone service provider name may not be displayed Adjusting the volume for the microphone input You can emphasise or weaken the microphone input volume level Setting item MIC INPUT Turn the Rotary encoder or the Double Action encoder to select the desired volume level 0 15 e This operation can be made for the unit of CDE 101 Series CDE 102 Series CDE W203 Series CDA 105 Series iDA X301 Series iDA X303 Series The setting can be adjusted only when the Bluetooth compatible device is connected The setting cannot be adjusted during a phone call Adjust the setting before placing a call Selecting the output speaker You can select the connected speaker in car to output the sound signal of telephone Setting item SPEAKER SELECT ALL The sound be output from all of speakers in car F L The sound only be output from the front left speaker F R The sound only be output from the front right speaker F LR The sound be output from the front left and front right speaker e This operation can be made for the unit of CDE 101 Series CDE 102 Series CDE W203 Series CDA 105 Series iDA X301 Series iDA X303 Series e The setting cannot be adjusted during a phone call Adjust the setting before placing a call Displaying the firmware version Setting item FW VERSION The current firmware version will be displayed Updating the fi
6. iPod Direct Connector Bluetooth compatible unit CDE 9872 9874 Series CDE 9880R CDE 9882Ri CDA 988 Series iDA X001 100 200 300 Series IVA W202 W205 Series IVA W502 W505 Series IVA D105 D106 Series The head units CDE 9872 and CDE 9872L purchased in the America are not Bluetooth compatible Bluetooth compatible Unit Sold separately UNITS iPod ap E iPod Sold separately If the Bluetooth INTERFACE is connected you cannot use a device connected to the INT lead voice interruption etc Fuse 7 5 A i Si To iPod Direct Connector Audio Interrupt Out lead Pink Black Interconnection Cable KWE 460E Sold Be sure to connect only when power is turned off as a malfunction may result separately ri This connection is not available for the head units Audio Interrupt In lead Pink Black purchased in the Europe For the European users please ACC Ignition lead Red refer to the card Interconnection Cable for To the ACC Power lead KCE 400BT supplied with the adapter Battery lead Yellow The FULL SPEED Connection Cable Connect this lead to a terminal that constantly KCE 433iV Sold separately provides power to the positive post of the battery Microphone Included Ground lead Black Connect to a metal part of chassis body with screw 11 en Specifications BLUETOOTH SECTION Bluetoo
7. passcode input operation refer to the mobile s Owner s Manual 3 EN Bluetooth SETUP Bluetooth Setup Operation The following steps 1 to 5 are common to the various Bluetooth functions For details refer to each individual function When placing or receiving a call or streaming audio from the Bluetooth device Bluetooth Setup operation cannot be performed e Refer to the Owner s Manual of the CD Head Unit or Digital Media Receiver and set BLUETOOTH IN or BT IN to ADAPTER and then perform Bluetooth SETUP operation l Press and hold SETUP for at least 2 seconds 2 Turn the Rotary encoder or the Double Action encoder to select the desired setting items and press ENT Setting items BT IN amp PAIR DEVICE VISIBLE MODE gt AUTO ANSWER gt CLEAR DEVICE amp SERVICE NAME MIC INPUT gt SPEAKER SELECT FW VERSION gt FW UPDATE When BLUETOOTH IN or BT IN is set to ADAPTER the above items are displayed Only for CDA 105 Series 3 Turn the Rotary encoder or the Double Action encoder to change the settings and press ENT A Press and hold ESC or SETUP or for at least 2 seconds The SETUP mode is canceled Setting the Bluetooth Device Select one of 5 connected Bluetooth compatible devices that you previously registered the fifth registered by guest mode Setting item PAIR DEVICE Turn the Rotary encoder or th
8. recognition of the KCE 400BT from the Bluetooth compatible device OFF Disable recognition of the KCE 400BT from the Bluetooth compatible device Depending on the mobile phone it may be necessary to input a passcode For inputting the mobile phone s passcode refer to the mobile phone s Owner s Manual Answering Calls Automatically When a call is received you can set whether to answer it automatically or not Setting item AUTO ANSWER ON When a call is received it is answered automatically after about 5 seconds OFF When a call is received it is not answered automatically Press 2 or to receive the call If the received call setting on the mobile phone is on the call will be answered automatically even though this setting is set to OFF Deleting a Bluetooth Device from the list You can delete the history of a previously paired Bluetooth compatible device Setting item CLEAR DEVICE 1 Turn the Rotary encoder or the Double Action encoder to select the Bluetooth compatible device to be deleted and then press ENT 2 Turn the Rotary encoder or the Double Action encoder to select CLEAR YES if you want to delete and then press ENT e Selecting CLEAR NO will cancel the setting Displaying the phone service provider name CDA 105 Series only Setting item SERVICE NAME The service provider name of the connected Bluetooth compatible device will be displayed If a Bluetooth compatible device is not
9. CS OF U K LTD Alpine House Fletchamstead Highway Coventry CV4 9TW U K Phone 0870 33 33 763 ALPINE ELECTRONICS FRANCE S A R L e GEBRUIKERSHANDLEIDING Lees deze aanwijzingen aandachtig alvorens dit toestel te gebruiken e PYKKOBOOBOJICTBO HO SKCINIYATAUTMU IIpouwsrutetute HacTosljee pyKOBOKOBOJCTBO nepeg HavaJIOM MCHONb30BaHUA OOOpyOBaHUA e INSTRUKCJA OBS UGI Prosimy zapozna si z t instrukcj przed przyst pieniem do u ytkowania urz dzenia e ETXEIPIAIO XPH2TH Tlagaxahobpe StaBdote to MOL XONOLUONO OETE TH ovoxev e HEF TRAS AAAA e HPWH EES HHA Bs o ZAN Parrot PL move wireless ALPINE ITALIA S p A Viale C Colombo 8 20090 Trezzano Sul Naviglio MI Italy Phone 02 484781 CH ALPINE ELECTRONICS DE ESPANA S A Portal de Gamarra 36 Pabell n 32 01013 Vitoria Alava APDO 133 Spain Phone 945 283588 ALPINE ELECTRONICS BENELUX GmbH Leuvensesteenweg 510 B6 1930 Zaventem Belgium Phone 02 725 13 15 CH 2 RCS PONTOISE B 338 101 280 98 Rue de la Belle Etoile Z 1 Paris Nord Il B P 50016 95945 Roissy Charles de Gaulle Cedex France DAESUNG ELTEC CO LTD Phone 031 711 1731 Web www dseltec co kr Phone 01 48638989 YAMAGATA Wuxi Co Ltd Block 28 25 Changjiang Nanlu WND jiangsu China Printed in China Y 68 14470Z05 A ENGLISH Contents Operating Instructions Z
10. E OR WIRING WHEN DRILLING HOLES When drilling holes in the chassis for installation take precautions so as not to contact damage or obstruct pipes fuel lines tanks or electrical wiring Failure to take such precautions may result in fire DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS Bolts or nuts used for the brake or steering systems or any other safety related system or tanks should NEVER be used for installations or ground connections Using such parts could disable control of the vehicle and cause fire etc DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS Arrange wiring and cables in compliance with the manual to prevent obstructions when driving Cables or wiring that obstruct or hang up on places such as the steering wheel shift lever brake pedals etc can be extremely hazardous USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS Use for other than its designed application may result in fire electric shock or other injury MAKE THE CORRECT CONNECTIONS Failure to make the proper connections may result in fire or product damage SZ A CAUTION This symbol means important instructions Failure to heed them can result in injury or material property damage USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY Be sure to use only the specified accessory parts Use of other than designated parts may damage this unit internally or may not se
11. FOR CAR USE ONLY NUR FUR AUTOMOBIL GEBRAUCH POUR APPLICATION AUTOMOBILE UNIQUEMENT PARA USO EN AUTOMOVILES SOLO PER L UTILIZZO IN AUTOMOBILE ENDAST FOR BILBRUK ALLEEN VOOR GEBRUIK IN DE AUTO TOJIbKO DNA UCNONb3OBAHIUA B ABTOMOBMSIAX DO U YCIA TYLKO W SAMOCHODZIE TIA XPHZH MONO ZE AYTOKINHTO ABSR ASSA 17 7A_LP INE Bluetooth INTERFACE KCE 400BT e OWNER S MANUAL Please read before using this equipment e BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Ger tes e MODE D EMPLOI Veuillez lire avant d utiliser cet appareil e MANUAL DE OPERACI N L alo antes de utilizar este equipo e ISTRUZIONI PER LUSO Si prega di leggere prima di utilizzare il attrezzatura e ANVANDARHANDLEDNING Innan du anv nder utrustningen b r du l sa igenom denna anv ndarhandledning D Bluetooth ALPINE ELECTRONICS MARKETING INC 1 1 8 Nishi Gotanda Shinagawa ku Tokyo 141 0031 Japan Phone 03 5496 8231 ALPINE ELECTRONICS GmbH Frankfurter Ring 117 80807 M nchen Germany Phone 089 32 42 640 ALPINE ELECTRONICS OF AMERICA INC 19145 Gramercy Place Torrance California 90501 U S A Phone 1 800 ALPINE 1 1 800 257 4631 ALPINE ELECTRONICS OF CANADA INC 777 Supertest Road Toronto Ontario M3J 2M9 Canada Phone 1 800 ALPINE 1 1 800 257 4631 ALPINE ELECTRONICS OF AUSTRALIA PTY LTD 161 165 Princes Highway Hallam Victoria 3803 Australia Phone 03 8787 1200 ALPINE ELECTRONI
12. Song ee 8 LEE 8 ACCESSOTIES cettseseeeettenesteeneteenees 9 Installation Velcro fastener Mounting 0 0 00 eeeeeeeeeeeeeeeeeeee Mounting the Microphone Connections Connect a Bluetooth compatible unit and an iPhone iPod to the Bluetooth INTERFACE Ee 10 Specifications ccsccseeseseens 12 LIMITED WARRANTY WARRANTY EN e Setting items operations etc may be modified or removed without notice depending on the connected Alpine Bluetooth compatible unit Len Operating Instructions WARNING A WARNING This symbol means important instructions Failure to heed them can result in serious injury or death DO NOT DISASSEMBLE OR ALTER Doing so may result in an accident fire or electric shock KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN Swallowing them may result in serious injury If swallowed consult a physician immediately USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND Check with your dealer if you are not sure Failure to do so may result in fire etc BEFORE WIRING DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL Failure to do so may result in electric shock or injury due to electrical shorts DO NOT SPLICE INTO ELECTRICAL CABLES Never cut away cable insulation to supply power to other equipment Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock DO NOT DAMAGE PIP
13. WARNING WARNING ccccceeseseseessesceccceeeeeeeseeseneess 2 CAUTION Zi aaa 2 Setup Before Using About Bluetooth 3 Before Using Hands Free Puncpon 3 How to connect to a Bluetooth compatible device Pairing smenrannn terein n 3 Bluetooth SETUP Bluetooth Setup Operation sssssesssseseseseeeeee 4 Setting the Bluetooth Device ce 4 Setting the Search Mode 4 Answering Calls Automatically 0 0 0 0 4 Deleting a Bluetooth Device from the list 5 Displaying the phone service provider name CDA 105 Series only eceeeeeeeeteeeeeee 5 Adjusting the volume for the microphone Selecting the output speaker Displaying the firmware version s 00 0 5 Updating the firmware cee 5 Hands Free Phone Control About the Hands Free Phone 6 Answering a Call oo eeseeereeeeeenees 6 Hanging up the Telephone oe 6 Voice Dial Operation eee eee 6 Adjusting the volume when receiving a Call 7 Redial Function ccccceccecsceseeeeeseeeseeeeeeeeenee 7 Audio Switching Operation CD Head Unit RO E H Call History ue 7 Redialing a Number in Dialed Calls FUSO EE 8 Dialing a Number in Received Calls a BRILO a AEAEE TA A ETE 8 Dialing a Number in Missed Calls LE EE 8 Dialing a Number In the Phone Book PHONE BOOK eee eee eects 8 Bluetooth Audio Function Bluetooth Audio Operation uu 8 Recalling the Bluetooth Mode s s1000150 8 Selecting the desired
14. curely install the unit in place This may cause parts to become loose resulting in hazards or product failure DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST Avoid installing the unit in locations with high incidence of moisture or dust Moisture or dust that penetrates into this unit may result in product failure HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS The wiring and installation of this unit requires special technical skill and experience To ensure safety always contact the dealer where you purchased this product to have the work done ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE Route the cables and wiring away from moving parts like the seat rails or sharp or pointed edges This will prevent crimping and damage to the wiring If wiring passes through a hole in metal use a rubber grommet to prevent the wire s insulation from being cut by the metal edge of the hole Setup Before Using About Bluetooth Bluetooth is a wireless technology allowing communication between a mobile device or personal computer over short distances This enables a hands free call or data transmission between Bluetooth compatible devices Bluetooth transmission is available in the unlicensed 2 4 GHz spectrum if the distance between devices is within 10 meters For details refer to the Bluetooth Homepage http www bluetooth com e Depending on the Bluetooth version a Bluetooth compatible
15. device may not be able to communicate with this adapter e Proper function of this adapter with all Bluetooth compatible devices is not guaranteed For handling of the BT compatible device consult your ALPINE dealer or ALPINE website e Depending on the surroundings Bluetooth wireless connection may be unstable e When you place a call or perform setup operations be sure to stop your car in a safe place e For details on the control selection enter cancel from the connected unit refer to the Owner s Manual of the respective unit e Depending on the connected Bluetooth compatible device s the function may differ Also refer to the Owner s Manual of the connected device s Before Using Hands Free Function Before using the hands free phone audio function the following settings need to be made 1 Be sure to set INT MUTE in the setup function of the connected CD Head Unit or Digital Media Receiver to OFF e To enable sound pass through of the Bluetooth compatible device make sure that INT MUTE is turned OFF Initial setting on the unit is OFF 2 Set BLUETOOTH IN or BT IN to ADAPTER Refer to the Owner s Manual of the connected units 3 Turn the ignition key off ACC OFF and on again ACC ON e Before using a hands free phone it must be paired with the adapter Refer to Bluetooth SETUP pages 4 5 If BLUETOOTH IN or BT IN setting is turned OFF at any time
16. e Double Action encoder to select a Bluetooth compatible device you want to use you want to change connection and then press ENT e If the connection is successfully changed CONNECTED or CONNECT is displayed for 2 seconds and then the display returns to the SETUP screen s If you input the wrong passcode or communications fail FAILED is displayed Ae When a mobile phone is paired with the unit up to 1 000 telephone numbers will automatically be obtained in the telephone book PHONE BOOK Also when the mobile phone is reconnected new information on the mobile phone will automatically be updated Depending on the connected mobile phone the telephone book PHONE BOOK may not be automatically obtained If the telephone book cannot be automatically obtained it can be manually transferred to the adapter by referring to the Owner s Manual of the mobile phone If you want to connect another Bluetooth compatible device after disconnecting the current Bluetooth compatible device connect the Bluetooth compatible device you want to change to The PIN code is fixed as 0000 Guest mode Use this mode for a temporary pairing Registration in guest mode is canceled once the ignition key goes from ACC to off Setting the Search Mode You can set whether the KCE 400BT can be recognized or not from a Bluetooth compatible device Normally set this to ON Setting item VISIBLE MODE ON Enable
17. ed calls that are missed are stored in the missed calls history You can redial these numbers by searching here Setting item MISSED Dialing a Number In the Phone Book PHONE BOOK Up to 1 000 telephone numbers are downloadable to the Bluetooth compatible unit from a mobile phone Dial a call by selecting a person from the phone book list Setting item PHONE BOOK Ifa name cannot be obtained via the phone book only the en is displayed The names registered in the telephone book are displayed If the name is not registered a number is displayed If both name and number cannot be displayed ID UNSENT will be displayed e The names of PHONE BOOK are listed alphabetically with the same beginning alphabetical character and can be skipped to the next alphabetical character by pressing lt 4 or e g press to the section beginning with alphabet B from A Only for CDA 105 Series The order of the list display depends on the design of the mobile phone If the call history or phonebook of the mobile phone is added or deleted while it is connected to the unit the list displayed on the unit may not be brought up to date If it is not updated you cannot correctly place a call 8 EN Bluetooth Audio Function Bluetooth Audio Operation Audio information of a Bluetooth compatible mobile phone a portable player etc is controllable playable wirelessly from an ALPINE Bluetooth compatible CD Head Unit or Dig
18. ital Media Receiver To play back audio a mobile phone or a portable player conforming to A2DP Advanced Audio Distribution Profile or AVRCP Audio Video Remote Control Profile is required Not all functions work with all devices During a call sound on the Bluetooth audio source is muted Recalling the Bluetooth Mode Press SOURCE to activate the Bluetooth audio mode Selecting the desired Song Press I Returns the beginning of the song being played back Press PP Forwards the next song Pausing Press P Al A playback stops Touching again will resume a playback Accessories Check accessory parts KCE 400BT Module Power Cable Microphone e Velcro Fastener So Interconnection Cable Only for KCE 400BT purchased in the Europe Bluetooth Interface Cable x1 x1 Microphone Mounting Brackets x2 x1 x1 Installation Velcro fastener Mounting For the sake of safety mount the adapter in one of the following locations Do not mount the adapter under your feet Do not step on the adapter or press excessively on it e Before mounting the adapter secure enough space at its upper side to prevent noise or to result in malfunction when sending or receiving data Depending on the adapter mounting location noise may occur when using a Bluetooth compatible device or a malfunction may result when sending or receiving data In this case mount
19. ode list is displayed e It may take some time for the list to be displayed and also directly after connection the list may not be brought up to date 4 Turn the Rotary encoder or the Double Action encoder to select a name or a telephone number from the list D Press ENT The selected telephone will be called If one name has several numbers registered in the elephone book for CD Head Unit press ENT after selecting the name then turn the Rotary encoder o choose the desired number and press ENT the elephone will be called Press and hold ENT for at east 2 seconds after selecting the name the default number of the name will be called Depending on the connected mobile phone this unction may not be performed Only for CD Head Unit Tf the name cannot be recognized default number will be displayed e Ifyou place a call directly from the paired mobile phone the phone number is not displayed you cannot redial from the unit in this case 7 EN Redialing a Number in Dialed Calls History Previously dialed telephone numbers are stored in dialed calls history You can redial a number by searching from dialed calls history Setting item DIALED Dialing a Number in Received Calls History Telephone numbers from received calls are stored in the received calls history You can redial these numbers by searching here Setting item RECEIVED Dialing a Number in Missed Calls History Telephone numbers for receiv
20. ormal mode in 30 seconds You can perform this operation only when a voice dial compatible mobile phone is connected If the mobile phone is not compatible with the voice dial NO SUPPORT is displayed for 2 seconds The Voice Dial function performance depends on the recognition range of the mobile phone and mounting location of the microphone Note when the microphone is mounted This operation cannot be performed when the current source is Bluetooth AUDIO and NO SUPPORT is displayed for 2 seconds Ifa called person that you say is not found NO CALL is displayed for 2 seconds Voice dial operation depends on the function of the mobile phone For details refer to the Owner s Manual of the mobile phone Ifyou place a call via voice dial you cannot display a phone number or name Adjusting the volume when receiving a Call While calling you can adjust the volume The adjusted volume level is stored Turn the Rotary encoder or the Double Action encoder to adjust the volume e You may need to increase volume from your regular audio listening source level However increasing the volume excessively may result in feedback If feedback is noticed as feedback is directly related to the volume turn down the volume as low as acceptable to eliminate it Positioning the microphone in a direction away from the main car speakers e g clipped on sun visor may also reduce feedback at high volume
21. rmware Setting item FW UPDATE With this setting the Bluetooth firmware update function can be activated For European users Future Bluetooth firmware update for phone compatibility at customer end will be available for Alpine products listed at in For information to update your Bluetooth firmware please visit your local Alpine web site or choose your country from Alpine Europe top page http www alpine europe com For the products which are OT listed at please contact your local official Alpine dealer or Alpine support for your country 1 iXA W404R iDA X305 303 301 301RR CDE W203Ri CDE 105Ri CDE 102Ri CDE 101R RM For American users Future Bluetooth firmware update for phone compatibility at customer end will be available for Alpine products listed at For information to update your Bluetooth firmware please visit Alpine America home page http www alpine usa com For the products which are NOT listed at 371 please contact your local official Alpine dealer or Alpine support for your country 2 iXA W404 iDA X305 303 CDE 105 CDE 102 For Asian users Future Bluetooth firmware update for phone compatibility at customer end will be available for Alpine products listed at 71 For information to update your Bluetooth firmware please visit Alpine Asia home page http www alpine asia com For the products which are NOT listed at please contact your local official
22. th Specification Bluetooth V2 0 Output Power 4 dBm Max Power class 2 Profile HFP Hands Free Profile HSP Head Set Profile A2DP Advanced Audio Distribution Profile AVRCP Audio Video Remote Control Profile GENERAL Power Requirement 13 5V DC 10 16 V allowable Weight 96 g CHASSIS SIZE Width 95 mm 3 3 4 Height 25 mm 1 Depth 77 mm 3 IEN
23. the adapter in another location Attach one side of the Velcro fastener to the box Remove the backing from the other side of the Velcro strip Gently press the adapter onto its selected mounting location Velcro fastener Mounting the Microphone For the sake of safety mount the microphone in the following location e Ina stable and secure location e Ina location that does not inhibit safely driving the vehicle e Mount the microphone in a location where the driver s voice can easily be picked up Choose a location for the microphone that can easily pick up the drivers voice Requiring the driver to move towards the mic for audibility causes a distraction that could be dangerous Mount the microphone using the supplied Velcro fastener or the bracket 9 EN Connections Connect a Bluetooth compatible unit and an iPhone iPod to the Bluetooth INTERFACE Before the operation be sure to set INT MUTE and AUX in the setup function of the connected head unit to OFF Head unit includes CD Head Unit AV Head Unit and Digital Media Receiver e When the KCE 400BT is connected to a head unit the INT MUTE setting may not be possible depending on the head unit The AUX setting may not be possible depending on the head unit For details refer to the Owner s Manual of the head unit Connections for the head unit with Full Speed connector Bluetooth INTERFACE connector Bluetooth compatible unit
24. vider s network Additionally certain features may not be activated by your service provider and or the provider s network settings may limit the feature s functionality Always contact your service provider about feature availability and functionality All features functionality and other product specifications as well as the information contained in the Owner s Manual are based upon the latest available information and are believed to be accurate at the time of printing Alpine reserves the right to change or modify any information or specifications without notice or obligation Dr Answering a Call Incoming calls are announced by the received call ring tone and a displayed message Caller name PHONE No Digital Media Receiver Press N CD Head Unit Press Js e When Answering Calls Automatically page 4 is set to ON you can receive a call automatically While calling the source sound on the unit is muted Hanging up the Telephone Digital Media Receiver Press N CD Head Unit Press a Voice Dial Operation You can call the telephone by performing voice operation 1 Press and hold N or J for at least 2 seconds The speak mode is activated and SPEAK is displayed 2 Say the telephone number name you want to call into the microphone Pressing and holding N or for at least 2 seconds will cancel the voice dial mode If the voice dial fails the unit will return to n
Download Pdf Manuals
Related Search