TriSquare TSX300-2VP two-way radio
Contents
1. CHANNEL Frequency CHANNEL Frequency 1 162 550 6 162 500 2 162 400 7 162 525 3 162 475 8 161 650 4 162 425 9 161 775 5 162 450 10 163 275 To access the NOAA Weather Radio from the main screen press the MENU button Softkey 2 press the DOWN W button to highlight NOAA RADIO and press OK Softkey 1 as in Figure 45 The NOAA Weather Radio screen in Figure 46 will now appear If you can not hear weather broadcast on Channel 1 press the CHANNEL button Softkey 1 to change the Weather Channel and the SET WX CHANNEL screen in Figure 47 will appear Use the UP DOWN A F button to change the Weather Channel Once you are able to hear a weather broadcast on a channel press OK Softkey 1 to select that weather channel The radio will return to the NOAA Weather Radio screen in Figure 46 To turn off the Weather Receiver press WX OFF Softkey 2 in Figure 46 to return to the main screen or press the PTT button to return to normal communications mode NOTE You will not be able to receive incoming calls when radio is in the NOAA weather radio mode 19 Pu MENU CHOMMELS TEXT MESSG a HORA RADIO CONTAC MENU DR EAT Main Screen Fig 45 SET WH CHANHEL Oe CHAMMEL 4 bi CHAMMEL Z CHANNEL Ws OFF OK Fig 46 Fig 47 o 4 3 3 VOX Voice Activated Transmission The TSX300 may be set to VOX mode so that transmission can be activated by voice audio either thro2. MENU TEST MESSAGES z TEST MSG HEL HORA RADIO STORED dE EXIT ok EIT SEND ERIT Fig 30 Fig 31 Fig 32 o 4 3 1 2 When STORED is highlighted and selected as in Figure 33 by pressing OK Softkey 1 you will advance to the STORED TEXT Menu allowing you fo scroll between the 4 options in Figures 34 and 35 These options are 16 TriSquare Electronics Corporation STORED STORED MY MESSAGES When highlighted as in Figure 36 and selected by pressing OK Softkey 1 you can toggle between 4 user defined messages HEL MY MESSAGES LAST RECUD STORED READY MOTES LAST SENT OK ERIT OK EXIT OK EXIT Fig 33 Fig 34 Fig 35 If no message is stored it will display NO MESSAGE Figure 37 To enter your own user defined message press EDIT Softkey 2 and the screen in Figure 38 will appear and you can enter your message Enter your text message as described above to enter a Text Message Press SAVE Softkey 1 in Figure 39 to save your message and advance to the Message screen in Figure 39 where you can either SEND Softkey 1 your message on the current channel or EDIT Softkey 2 taking you back to screen in Fig 38 allowing you to edit your message key 2 to edit the message STORED MESSAGE 4 HO M 1 to send message on the current channel or EDIT Softkey f you select an existing stored message simply press SEND Soft SAVE EXIT S
3. If you press DONE Softkey 2 during the Channel Entry process before entering a number or if you enter a number under 10000 you will see the screen in Figure 71 and must press OK Softkey 1 and go back to correctly enter a valid channel SETTINGS PRIVATE CH A PRIVATE CONTRET Fig 64 KEY BEEF Fig 65 BE OTHER PRIVATE CH TK ERIT ENTER HAME ENTER CHANNEL DELETE DONE DELETE DONE SHANGE DIE Fig 66 Fig 67 Fig 68 CONTACTS ENTER MAME THUALID P BOE ENTER HAHHEL TEAM i HUMBER SELECT TIEN Hi EIE Fig 69 Fig 70 Fig 71 e 4 3 4 8 RADIO CLONING The TSX300 has the ability to transfer internal radio data and information through Radio Cloning It can be used to copy the entire radio s settings Clone Radio or copy the entire Contacts list All Contacts or only select contacts Select Contacts The sending radio and the receiving radio should must be close or directly next to each other If just copying selected contacts to a second radio there must be enough empty memory slots remaining for the copied items to fit If there is not enough space in the receiving radio the sending and receiving radios will display NOT ENOUGH SPACE and the cloning will be aborted 26 TriSquare Electronics Corporation For cloning the radio uses a predetermined default channel The radio is set to this default channel upon entering the clon ing
4. DOWN A F button to scroll between the 5 Ring Tones as seen in Figures 54b and 54c As you scroll you will hear each Ring Tone When you have the highlighted the Ring Tone you wish to choose press the OK button Softkey 1 to select that Ring Tone and return to the Main Screen or press the EXIT button Softkey 2 to exit without changing the Ring Tone and return to the Main Screen MENU RING TONES RING TOMES RING TOHE 1 CALL ALERT RING TONE 2 Ok ENIT DE EXIT Fig 53 Fig 54a RING TOMES RING TONES RING TOHE 3 RIMG TOME S RING TOHE 4 RING TOHE 1 OK EXIT EXIT Fig 54b Fig 54c 4 3 4 2 CALL ALERT The Call Alert menu allows you to select the alert type your radio will provide when another user on your channel presses their CALL button or you receive a call waiting notification or a text message Your TSX300 can be set for Ring Tone vibrate or both To access the CALL ALERT menu from the SETTINGS Menu scroll until CALL ALERT is highlighted Figure 55 and press OK Softkey 1 The screen view in Figure 56a will appear Use the UP DOWN A F button to scroll and highlight the selection you want for CALL ALERT selecting either RING VIBRATE or both via VIB amp RING With your selection highlighted press the OK Softkey 1 to accept your selection and return to the Main screen or press EXIT Softkey 2 to return to the Main screen without making a change The ICONs in the upper
5. 15 Not pressing a button for 2 seconds cursor will advance to the next position Pressing a different Alpha Numeric button will enter a new letter in the next position Press the NEXT gt button to advance the cursor to the next position Use the NEXT gt button to advance cursor or create a space between words and use the BACK button to erase the previ ous character When finished creating a message press SEND Softkey 1 to send the text message on the current channel and return to the main screen Press EXIT Softkey 2 3 times to return to the main screen without sending the message If you had entered a text message on the screen in Fig 32 it will be saved and can be completed next time you select NEW and return to the screen in Fig 32 If a radio transmission is received while a message is in process the message in process will continue to be displayed You will be able to hear the reception of the incoming signal and can do 1 of 3 options 1 Continue working on inputting a Text Message 2 Press EXIT Softkey 2 3 times to return to the main screen and the text message you were working on will be saved as described above when pressing EXIT Press the PTT button to transmit back and respond to the trans mission Again this acts like pressing EXIT returns you to the Main Screen and saves the message to be worked on later NEW TEXT MSG SCREEN
6. replaced under warranty This warranty gives you specific legal rights and you may also have other rights which may vary from state to state Exclusions This limited warranty does not apply 1 To any product damaged by accident 2 In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs 3 If the serial number has been altered defaced or removed 4 If the owner of the product resides outside the U S A All implied warranties including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty TriSquare shall not be liable for any incidental consequential or other damages including without limitation damages resulting from loss of use or cost of installation Some states do not allow limitations on how long an implied warranty lasts and or do not allow the exclusion or limitation of incidental or consequential damages so the above limitations 34 TriSquare Electronics Corporation may not apply to you For products purchased outside the U S A please contact your local dealer for warranty information 8 2 FCC Licensing Information Operation of the eXRS radios does not require a license and eXRS radios can be used by anyone for any purpose business or personal The eXRS series of two way radios operates in the license free 900 MHz band and is subject to the Rules and Regulations of the Federal Communications Commission
7. A Group Channel may be any channel from 0 to 9999999999 All channels entered through the Contacts Menu are entered as Group Channels All eXRS radios on the same Group Channel can communicate with other eXRS radios on the same channel To add a new Group Channel entry into your contact list press CONTACTS on the Main Screen Softkey 1 to enter the CON TACTS menu and scroll UP A or DOWN F to highlight the ADD NEW function as in figure 13 and press SELECT Softkey 1 The screen in figure 14 will appear NOTE f you have many entries within your Contacts list you may scroll up to get to the ADD NEW function quicker which is at the bottom of the list Enterthe name of the new GROUP contact Press DONE Softkey 2 in Figure 15 and the screen in Figure 16 will appear Enter the new Channel number using the keypad Once you have the channel number entered as in Figure 17 press DONE Softkev 2 to return to the Main Screen CONTACTS ENTER NAME ENTER NAME My RADIO TEGH ADD MEW TERM 18 SELECT VIEW DELETE DOME DELETE DONE Fig 13 Fig 14 Fig 15 ENTER CHANNEL TEAM i at ia LESLEEL aL 1060100106 DELETE DONE CHANGE DONE Fig 16 Fig 17 The Group Channel is entered To view your entry in the Contacts list press the CONTACTS button Softkey 1 and the screen in Figure 18 will appear Again if you have multiple 12 TriSquare Electronics Corporation e
8. At the lowest level the Battery Low Icon will flash and an audible beep will sound every two minutes Battery Full soa Battery Strong Battery Low Battery Weak When the low battery meter is at the lowest level batteries should be replaced or recharged if using the TriSquare TSX BP NiMH rechargeable battery pack 3 5 Call Back lt 4 Button Functions When on the Main screen this button acts as the Can button to signal other users and while in any Menus or Texting it 7 acts as a lt 4 Back button o 3 5 1 CALL Function Press the Call button to send a call alert to other users on the same Channel The radio will transmit a call on the Channel that is currently showing on the display A radio that receives the call will play a preselected ring tone It is not necessary to send a call before transmitting your voice to another user on the same Channel o 3 5 2 BACK Function When navigating the Menu Systems or Contacts the Back button usually moves back to a previous menu When entering characters for Contacts or text messaging the t Back button moves the cursor back one space 3 6 Keypad Lock Next gt Button Functions When on the Main screen this button acts as the Keypad Lock button and while in the Contacts menu or while text messaging this button acts as a Next button o 3 6 1 LOCK Function Pressing and holding the Lock button for 3 seconds will lock the radio keys with the ex
9. FCC This product has been approved by the FCC for use in the USA and approved by IC for use in Canada The FCC identifier can be found on the product label inside the battery compartment This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device does not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Read this manual carefully and make sure you know how to properly operate the radio before use Changes or modifications not expressly approved by TriSquare may void the user s authority granted by the FCC to operate this radio and should not be made To comply with FCC requirements transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs Replacement of any transmitter component crystal semiconductor etc is not authorized by the FCC equipment authorization for this radio and could violate FCC rules Note Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited 8 3 Safety Information for eXRS Radios Your wireless handheld portable transceiver contains a low 35 power transmitter When the PTT button is pushed it sends out radio frequency RF signals The device is authorized to ope
10. Figure 25a Exception if you are on the Private Channel of the call coming into your Private Channel it would then appear as a standard signal reception o 4 2 3 2 CALL WAITING If it has been within 20 seconds since your last TX or RX on a channel not your own Private Channel and someone attempts to contact you on your Private Channel you will get a Call Waiting screen Figure 25b You can either ACCEPT Softkey 1 the call to start a new conversation or EXIT Softkey 2 and continue with the existing conversation on the channel you are on NOTE Pressing the PTT button will transmit on the existing channel that you are on Therefore you may continue with your previous conversation TX or RX and will have up to fifteen seconds to accept the call waiting PRIVATE CALL Fig 25a eile Fig 25b CALL WAITING BOE Ite BOE ACEEPT 4 3 RADIO MENU 14 TriSquare Electronics Corporation o 4 3 1 TEXT MESSAGING The TSX300 can send and receive text messages from other TSX300s A Text Message can have up to 80 characters per message In addition the TSX300 has the ability to store 4 user defined messages MY MESSAGES or choose from 6 pre defined messages READY NOTES T PRIVATE CALL CONTACTS MENU a Fig 26 Fig 27 a CHANNEL HI READ ENIT TONTACTS MENU Fig 28 Fig 29 When receiving a text message the display will show RECEIVE and the Caller ID as
11. MY RADIO TGHH B AGO MEWI Bat iati HEG SETUP DELETE DONE DELETE DONE Fig 6 Fig 7 Fig 8 To enter the channel number you would like for your MY RADIO setting enter the number via the keypad It is suggested to enter your phone number with area code or some portion of it to have a unique channel number for yourself You can use the DELETE button Softkey 1 as needed or the BACK button Once you have the number you want entered as in Figure 10 for this example press DONE Softkey 2 to complete your entry and you will go back to the main screen To verify your entry press CONTACTS Softkey 1 in Figure 11 VIEW Softkey 2 to see your MY RADIO information For this example we have entered JOHN channel 5557771234 per Figure 12 ENTER CHANNEL ENTER CHANNEL Fig 9 Fig 10 CONTACTS MY RADIO HY RADIO ADD NEWI SELECT VIEW CHANGE Fig 11 Fig 12 11 NOTE MY RADIO channel is always a PRIVATE CHANNEL as opposed to a GROUP CHANNEL The functions and use of Private Channels and Group Channels are detailed later in this manual Operational Scenario If you have multiple radios all with the same MY RADIO channel with different Caller ID Names this will effectively act as a private group channel o 4 2 2 GROUP CHANNEL A Group Channel may be used to communicate between 2 or more people and is not associated with your MY RADIO entry or another radio s MY RADIO entry
12. are new or fully charged Unit has poor reception 32 TriSquare Electronics Corporation Make sure receiving unit has a clear and unobstructed line of sight to the transmitting unit To achieve this getting to the highest possible point will help to maximize the receiving capability 8 Product Service If you are having any problems or have questions about the operation of your TriSquare eXRS two way radio please contact TriSquare first at service trisquare us DO NOT RETURN THIS PRODUCT TO THE STORE For products purchased in the USA If your product should require factory service please contact TriSquare first before sending your radio in This will ensure the fastest turn around time for repair Should you be asked to send your radio in it will be necessary to furnish the following to have the product serviced and returned 1 For warranty service include proof of purchase such as a copy of your sales receipt Do not send your original copy of your sales receipt as it cannot be returned 2 Send the entire product 3 Enclose a description of the problem you are having along with a typed or clearly printed name and address of where the product is to be returned 4 Pack your radio securely to prevent damage in transit If possible use the original packing material 5 Ship prepaid and insured by way of a traceable carrier to TriSquare Electronics Corporation 1420 NW Vivion Rd Suite 109 Kansas City MO 64118 P
13. in Figure 26 or as in Figure 27 if being received on your Private My Radio Channel until the complete message is received Once received the radio will play a triple beep or vibrate if Vibrate is active and the display will show NEW TEXT MSG RECVD FROM Caller ID and the Softkey functions will become READ and EXIT as in Figure 28 When an unread message is in the TSX300 memory the Message ICON Ex will be lit on the display as shown in Figure 29 The Text Mes saging functions can be accessed in the Radio Menu system To access the TEXT MESSAGING menu from the main screen press the MENU button Softkey 2 and the Menu screen will appear as in Figure 30 Since TEXT MESSAGING is the first func tion in the Radio Menu and TEXT MSG is highlighted press OK Softkey 1 You will then enter the TEXT MESSAGES menu as in Fig 31 Here you have 2 options create a NEW message or view add change delete or send a STORED message o 4 3 1 1 When NEW is selected in Figure 31 by pressing OK Softkey 1 the screen in Figure 32 will appear and is used to enter a new text messages To enter a text message press the Alpha Numeric button with the desired letter If the desired letter is not the first one press the key again until the desired letter is displayed Note The number as sociated with the button is the last choice available for that button After entering a desired letter you may accept it by one of the following
14. left of the LCD display indicate which Call Alert is selected either ef for the audible Ring Tone see RING TONE above or tht to indicate Vibrate or 41 for both The default setting is Tone only Figure 57 shows both VIB amp RING have been selected 22 TriSquare Electronics Corporation SETTINGS CALL ALERT RING TOMES RING CALL ALERT WIBRATE OK EXIT OK EXIT Fig 55 Fig 56a CALL ALERT Sat VIBRATE CHEMMEL IB RIHG a DE EXIT CONTACIS MERO Fig 56b Fig 57 4 3 4 3 ROGER BEEP Each voice transmission to another eXRS user will be ended with a transmission complete Roger Beep when the transmit ting user releases the PTT button It will be heard on the receiv ing unit It is used in a similar fashion to the phrase Over which is used to indicate to the receiving unit that the transmitting unit has completed its transmission The TSX300 has a Roger Beep and the ability to turn this function On or Off The default setting is On To access the ROGER BEEP menu from the SETTINGS Menu Figure 58 scroll until ROGER BEEP is highlighted and press OK Softkey 1 The screen view in Figure 59 will appear Use the UP DOWN A W button to scroll between Rog er Beep ON and Roger Beep OFF Once you have highlighted your preference press OK Softkey 1 to accept your selec tion and return to the Main screen or press EXIT Softkey 2 to return to the Main screen without ma
15. menu You have the option of changing the cloning channel for a particular cloning session but only to channels above 10000 Both radios will change to channel 0 after cloning is complete To access the RADIO CLONING menu from the SETTINGS Menu Figure 72 scroll until CLONING is highlighted and press OK Softkey 1 The CLONING Menu screen in Figure 73a will appear Use the UP DOWN A F button to scroll between the options of COPY FROM Figure 73a radio sending informa tion COPY TO Figure 73b radio receiving information and CHANGE CHANNEL Figure 73c to change the default cloning channel SETTINGS CLONING PRIVATE CH COPY FROM CLONING COPY TO DE EXIT Ok EXIT Fig 72 Fig 73a CLONING CLONING COPY FROM CHNG CHANHL COPY TO COPY FROM DE EXIT OF EXIT Fig 73b Fig 73c 4 3 4 8 1 COPY FROM option For the sending radio highlight COPY FROM as in Figure 73a and press OK Softkey 1 The COPY FROM screen will appear and the sending radio will have 3 choices to send to another radio These choices are CLONE RADIO all information to be transferred including MY RADIO and all stored contacts ALL CONTACTS the entire Contacts list excluding My Radio and SELECT CONTACTS selected contacts only to be transferred The Copy From screens are illustrated under the COPY FROM Screens SENDING RADIO 4 3 4 8 1 CLONE RADIO choose CLONE RADIO to make an exact copy of yo
16. the list and vice versa o 4 2 1 MY RADIO CALLER ID Your MY RADIO information has 3 useful purposes i It allows you to personalize your radio by entering your desired name and Personal Private channel into the MY RADIO memory Second this information also acts as your Caller ID When you transmit to other TSX300 users the Caller ID information is sent When the TSX300 receives a transmission from other TSX300s it will display the ID from that radio provided that user has entered an ID into MY RADIO If the reception is from a TSX100 or from a radio with no ID entered your display will show RECEIVE with no Caller ID information The Caller ID will continue to be shown on the display while receiving from that person and for 5 seconds after unless a different Caller ID is received It allows other users to contact you on your Private Channel regardless of what channel you are on at that moment When you provide your MY RADIO information to other users they can contact you directly via your Private Channel The radio receiver always monitors your MY RADIO channel regardless of what channel you are on except while actually transmitting or receiving on the other channel Because of this feature your radio has CALL WAITING when called on your Private Channel and will be described below under the Private Chan nel description The ID may be up to 8 alpha numeric characters in length and your Private Channel m
17. 000 NOTE If you change the channel for one radio both radios involved in the Cloning must be changed to this new Cloning Channel The new channel will be used only for the current cloning session CHANGING CLONING CHANNEL Screens CLONING CHANGE CLONING CHANNEL CHANGE CHAN COPY FROM 7 OK EXIT DELETE DONE 5 eXRS Accessories TriSquare offers a variety of accessories for the eXRS radios These are Dual Desktop Charging Cradle TSC1 DC AC DC Wall Adaptor for TSC1 DC TSC1 AC NiMH Rechargeable Battery Pack TSX BP VOX PTT Headset w Boom Mic TSX HS1 The TriSquare TSX10A accessory kit offers all of the above as follows 1 Dual Desktop Charging Cradle 1AC DC Wall Adaptor 2 NiMH Rechargeable Battery Packs 2 VOXIPTT Headsets w Boom Mic 5 1 Dual Desktop Charger TSC1 DC and AC DC Wall Adaptor TSC1 AC Operation The TriSquare TSC1 DC Dual Desktop Charger has 2 charging wells and can charge the TriSquare TSX BP NiMH rechargeable battery packs either in the radio or out or a combination of either of the two NOTE Do not attempt to charge alkaline batteries 30 TriSquare Electronics Corporation To recharge your eXRS rechargeable battery pack either in or out of your radio plug the AC DC Wall adaptor into a 120V AC outlet and plug the round DC connector into the back of the desktop charger NOTE This power unit is intended to be correctly oriented in a vertical or flo
18. CH is highlighted and press OK Softkey 1 The PRIVATE CH information screen in Figure 65 will appear Press OK Softkey 1 to verify your understanding of the Private Channel information that is displayed stating that the Private Channel entry should be the same as that of another s MY RADIO information The Private Channel entry screen shall appear as in Figure 66 Using the Alphanumeric keypad enter the name of the Private Contact you wish to store refer to name entry in the CONTACTS section of this manual Once you have the name entry complete press DONE Softkey 2 to advance to the Enter Channel screen Figure 67 Enter the Channel number of that Private Contact NOTE It must match the Private Contact s MY RADIO name and number Once you have it entered press DONE Softkey 2 to advance to the verification screen as in Figure 68 Press DONE again to confirm your entry it will be entered into the Contacts list as a Private Contact indicated with a P 25 as shown in the Contacts screen in Figure 69 as opposed to a Group Contact and will return to the Main screen During the Name entry process on Figure 66 if you press DONE Softkey 2 without entering any information you will get a warning that you must enter a name Figure 70 You can press OK Softkey 1 to go back to the Name Entry screen in Figure 66 or you can press EXIT Softkey 2 to return to the Main screen without making an entry
19. CLONE RADIO ALL CONTCTS SELECT CONT FLL CONTCTS SELECT CONT CLONE RADIO aT x aT x nm CLONE RADIO COPY ALL CONTACTS SELECT CONTACTS SELECT CONTACTS DUPLICATING REPLACE CONTACTS o BoB D 808 RADIO oe O JEFF Mo JOHN xr rr wj TE CLONE RADIO COPY ALL CONTACTS SELECT CONTACTS IS RECEIVING 1S RECEIVING 1S RECEIVING RADIO READY RADIO READY RADIO READY x ca x ar aT COPY FROM CLONING IN PROCESS ERT COPY FROM CLONING COMPLETE rig 4 3 4 8 1 3 SELECT CONTACTS choose this op tion if you want to copy only selected contacts from the 28 TriSquare Electronics Corporation list Highlight SELECT CONT and press OK Softkey 1 The SELECT CONTACTS screen will appear Use the UP DOWN A F button to scroll between your contacts To select a contact to be transferred with the contact name highlighted press the OK button Softkey 1 and the check box will darken indicating that con tact is selected When all contacts to be transferred are selected press DONE Softkey 2 to advance to the screen asking you IS RECEIVING RADIO READY Make sure the receiving radio is ready to receive When ready press OK Softkey 1 to start the Cloning process The display will indicate CLONING IN PRO CESS and once completed the display will indicate CLONING COMPLETE Press OK Softkey 1 and radio will return to the Main screen on channel 0 4 3 4 8 2 COPY TO option This option is sele
20. D MESSAGE 2 LAST RECUD MESSAGE HERE MO MI GE DELETE EXIT EXIT Display for Last 2 Messages Received LAST SENT When Last Sent is highlighted as in Figure 42 and selected by pressing OK Softkey 1 the display will show the last Text Message sent When viewing the Softkeys will provide you with SEND and EDIT When EDIT is selected by pressing Softkey 2 in Figure 43 the screen in Figure 44 will appear allowing you to Edit the last message sent From here you can either SAVE your edited Text by pressing Softkey 1 and return ing to the Sent Message screen in Figure 43 or EXIT 18 TriSquare Electronics Corporation Softkey 2 without editing and return to the STORED Message screen in Figure 42 Once edited and returned to the screen in Figure 43 press SEND Softkey 1 to send the message on the current channel and return to the Main screen To return to the STORED MESSAGES Menu without editing or sending press the BACK lt d button Edit Screen STORED LAST SENT MESSAGE HERE LAST R LAST 3 DE EXIT SEHD EDIT SAVE EXIT Fig 42 Fig 43 Fig 44 o 4 3 2 NOAA WEATHER RADIO The TSX300 is equipped with a NOAA Weather Radio Receiver and may be switched from normal communications mode to receive on one of ten continuous broadcast channels of current weather conditions and alerts for a local area The NOAA Weather channel frequency assignments are as follows
21. END EDIT Fig 38 Fig 39 MESSAGE 1 MESSAGE 2 MESSAGE 3 MESSAGE 4 YOUR MESSAGE ARE YOU READY HERE FOR LUNCH SEND EDIT SEND EDIT EXIT EDIT EXIT EDIT USER DEFINED MY MESSAGES READY NOTES When highlighted as in Figure 40 and selected by pressing OK Softkey 1 you can toggle between 6 pre defined messages 17 Using the UP DOWN A V button select from Ready Note messages 1 through 6 With your selection on the display you can either press SEND Softkey 1 to send that specific message on the current channel or press EXIT Softkey 2 to return to the STORED Message Menu screen STORED Fig 40 8 tv ME READY MOTES SCREENS OF PRE DEFINED READY NOTES MESSAGES DE EXIT READY NOTE di READY NOTE 4 WES WHERE ARE VOLT READY NOTE 2 READY NOTE S HO CART TALE SEND SEND RIGHT MOD READY NOTE 3 READY NOTE 6 0 CAH VOL SEND SED TALES ET SEND ERIT LAST RECVD When highlighted as in Figure 41 and selected by pressing OK Softkey 1 the display will show the last Text Message received and provide who sent it based on the Caller ID of the sending radio You can toggle between the last 2 Text Messages received Once viewed you can either DELETE the message or select EXIT to return to the STORED Message Menu screen STORED 1 FROM BOB RECU
22. S Menu Figure 62 scroll until KEY BEEP is highlighted and press OK Softkey 1 The KEY BEEP Menu will appear as in Figure 63 Use the UP DOWN A F button to toggle between BEEP ON and BEEP OFF With your selection highlighted as in Figure 63 press OK Softkey 1 to make that selection and return to the main screen or press EXIT Softkey 2 to return to the Main screen without making a change 128 SECONDS OFF 24 TriSquare Electronics Corporation SETTINGS KEY BEEF Ts TIMEOUT BEEP OH EEN BEEF BEEF OFF DE EXIT OK EIT Fig 62 Fig 63 4 3 4 6 SILENT OPERATION Your TSX300 can be set up for silent operation by doing 3 things 1 Turn Call Alert to Vibrate only 2 Turn Roger Beep Off 3 Turn Key Beep Off By making these 3 settings your radio can be made to operate silent and only the speaker audio will be making sound By using the TriSquare VOX PTT Headset you can eliminate the speaker audio With the 3 settings listed above Text Messag ing is also done silently 4 3 4 7 PRIVATE CHANNEL A Private Channel are those Channels entered that match an other radio s MY RADIO channel A Private Channel is used to contact specific radios regardless of what channel the radios you are trying to contact are on Private Channels are entered into the Contacts list through the Settings Menu To access the PRIVATE CHANNEL menu from the SETTINGS Menu Figure 64 scroll until PRIVATE
23. ay be any number between 10000 and 9999999999 To set your MY RADIO s information from the Main Screen press CONTACTS Softkey 1 Figure 4 to get into the CON TACTS menu With MY RADIO highlighted press Softkey 1 labeled as SETUP per Figure 6 provided you have not already entered information here previously to enter your person alized information that is in your MY RADIO the screen in Figure 7 will appear NOTE If you have already stored information here for MY RADIO you would press VIEW CHANGE per FIGURES 11 and 12 to change Using the keypad first enter your name or the ID name you wish to have for your radio The name can be up to 8 characters long Since the letters and numbers share the same key on the radio keypad like a phone you will need to press certain buttons 10 TriSquare Electronics Corporation repeatedly to get the letters you want For example fo enter the name JOHN you will need to press the keys in this sequence 5 once 6 three times 4 twice and 6 twice After each letter entry the cursor will move one character right by one of three ways 1 Not pressing a button for 2 seconds 2 press a different alphanu meric key or 3 you can use the P key to move the cursor When you have completed the name entry as in Figure 8 press DONE button Softkey 2 to move to the channel entry screen as in Figure 9 CONTACTS ENTER CALLER ID ENTER CALLER ID
24. ception of the PTT Power On Off Call button and Volume Up Down button The Lock icon jg will be displayed on the LCD display and an audible tone will sound when keypad is locked Pressing and holding the Lock button again for 3 seconds will unlock the keypad and the Lock icon will disappear and another audible tone will be heard o 3 6 2 NEXT Function While entering characters for Contacts or text messaging use of the gt Next button will move the cursor to the right one space 4 Other Radio Functions and Features 4 1 CHANNEL Selection All of the TriSquare eXRS radios are set from the factory to channel 0 The TSX300 has the capability of 10 Billion channels You can input any 10 digit channel number between 0 and 9999999999 for 10 Billion unique channels All eXRS radios will communicate with other eXRS radio provided that they are set to the same Channel It is suggested that you enter a new channel unique to you into the MY RADIO part of memory detailed below and for simplicity where appropriate the user may use their area code and phone number or some part of it You can enter a Group channel from the main screen or may select one from the Contacts List 8 TriSquare Electronics Corporation From the main Screen in Figure 1 simply enter the desired channel directly on the numeric keypad For example if you want to enter channel 1234 the screen would appear as in Figure 2 Once entered press the Softk
25. cted on the radio that is to receive the cloning information from another radio For the receiving radio when in the cloning menu highlight COPY TO and press OK Softkey 1 and your radio will be READY TO RE CIEVE the cloning information from the sending radio The COPY TO screens are illustrated under COPY TO Screens RECEIVING RADIO When the sending radio starts the Cloning process the receiving radio display will indicate CLONING IN PROCESS When the Cloning process is complete the display will indicate CLONING COMPLETE Press OK Softkey 1 to return to the Main screen on Channel 0 At anytime during this process you can press EXIT Softkey 2 to abort the Cloning process COPY TO Screens RECEIVING RADIO OK CLONING COPY FROM COPY TO EXIT cory TO copy TO COPY TO READY TO CLOMING RECEIVE COMPLETE EXIT EXIT DE 4 3 4 8 3 CHANGE CHANNEL option The Clon ing process takes place on a predetermined channel preset at the factory If you have a problem cloning on the default channel you can change the cloning chan nel to any channel above 10000 To change the Clon ing Channel while in the Cloning Menu scroll down and highlight CHANGE CHAN and press OK Softkey 29 1 See screens shown under CHANGING CLONING CHANNEL Screens The Change Cloning Channel screen will appear Using the keypad enter the channel you wish to use for Cloning must be greater than 10
26. e battery compartment with the label side up and the up arrow pointing towards the top of the radio Replace the battery compartment door by sliding the top tabs in first at an angle until it is all the way up and then pressing down at the bottom until the battery compartment door locking tab clicks into place securing the door closed Replace belt clip if desired 2 2 Initial Radio Setup To turn your radio on after installing batteries per above press and hold the POWER On Off button for 2 seconds The radio will go through an initialization cycle showing eXRS on the display and the power on confirmation tone will sound Once powered up the radio will be in a stand by mode ready to transmit or receive a transmission on the default channel O or ready for you to modify or change features via the MENU button Softkey 2 All radio settings and stored contact information are maintained when radio is off and batteries are removed CHANNEL EI Power Up Screen Main Standby Screen Your TriSquare TSX300 has many features and functions that make the TriSquare eXRS radio a powerful and useful communications tool and easy to use Basic functions include Transmit and Receive Menu System and Soft Keys Volume Control and Up Down Scrolling Low Battery Alert Call Back lt 4 Button Keypad Lock Next Button 5 o0o000 0 Your TriSquare TSX300 also has more advanced features and functions To access these f
27. eatures you will need to use the radio keypad buttons and navigate through the MENU system per the instruction in this manual o Channel Selection o Contacts My Radio Caller ID Group Channel Group Call Private Channel Private Call Text Messaging NOAA Weather Radio VOX Voice Activated Transmitting Radio Settings Ring Tones Call Alert Roger Beep 0000 Transmit Timeout Key Beep Private Channel Cloning 3 Basic Radio Functions 3 1 Transmit and Receive The unit is normally in standby receive mode To transmit hold the radio approximately 2 to 3 inches in front of your face and press and hold the prt button for the duration of your transmission Speak clearly in a normal voice tone The radio will transmit on the channel currently shown on the display Only radios set to the same Group Channel can receive the transmission When the PTT button is released the unit will return to stand by receive mode TRANSMIT To and the Channel will be visible on the LCD during the transmission RECIEVE will be visible on the LCD when a valid signal is being received as well as the Caller ID if applicable NOTE eXRS radios are high technology frequency hopping spread spectrum radios During communications they automatically hop from frequency to frequency in sync with each other This prevents scanners and other surveillance equipment from eavesdropping on communications In the unlikely event that your radios are on
28. ey 1 that corresponds to the selection ox The radio will then be on that channel and the display will appear as in Figure 3 You can then communicate with any other eXRS radio on that same group channel rf ENTER CHANNEL fy CHOBHHEL CHAMMEL a igs CONTACTS MENU DE EXIT Tommaseo Fig 1 Fig 2 Fig 3 4 2 CONTACTS The Contacts List is where Channels may be stored so they can be recalled later The TSX300 can store up to 100 entries The first contact in the list will be the radio s ID my RADIO All other contacts are stored in alphabetical order My Radio contains the radio s Private Channel number 10000 or higher and the Caller m name for the radio The last item in the contacts list is the menu selection to ADD NEW contacts The TSX300 can store a name associated with each stored number The name can be up to 8 characters long The stored information in Contacts will be retained with power off and or batteries removed CONTACTS To enter the CONTACTS menu Press the Softkey 1 that corresponds with CONTACTS per Figure 4 on the display to enter the Contacts menu The screen in Figure 5 will appear Fi CONTACTS CHOMHELE MY RADIO De IADE MELI CONTACTS MEN SELECT TEW Fig 4 Fig 5 Pressing the up A and pown F button will scroll through the list of up to 100 previously stored Contact names Scrolling will wrap from the end to the beginning of
29. he conditions of use For example with large or many obstructions between users range could be less than a mile and with clear line of sight between users range could extend to more than one hundred miles 2 Getting Started Thank you for purchasing the TriSquare TSX300 eXRS two way radio Your TriSquare eXRS radio is a unique two way radio and a powerful communications tool that will give you years of trouble free service if cared for properly Read the owners manual carefully before operating the radio 2 1 Installing Batteries or Rechargeable Battery Pack To use your new TriSquare eXRS radios you will need to install 3 AA alkaline batteries or the optional TriSquare model TSX BP NiMH rechargeable battery pack To install batteries first remove the belt clip or swivel the belt clip to the side To open the battery compartment door while holding the radio face down use your thumbnail to lift upwards towards the top of the radio on the battery compartment tab and continue to lift the battery compartment door up and remove If you are using 3 AA batteries insert the 3 AA with the correct polarity as indicated by the battery diagram on the inside of the battery compartment matching the positive and negative terminals of the batteries to 4 TriSquare Electronics Corporation the battery diagram If you are using the optional TriSquare NiMH rechargeable battery pack TSX BP insert the battery pack into th
30. king a change SETTINGS ROGER BEEF CALL ALERT ROGER OM ROGER BEEF ROGER OFF DE E IT DE EXIT Fig 58 Fig 59 4 3 4 4 TX TIMEOUT TIMER The radio may be set to limit the amount of time that it can continuously transmit The Timeout settings are in 30 second intervals of 30 60 90 120 and OFF The default setting is 23 OFF Transmitter timeout shall be indicated by a short double beep as the transmitter is turned off If no received signal is present you may transmit again after releasing the PTT button and pressing it again To access the TX TIMEOUT TIMER mode menu from the SETTINGS Menu Figure 60 scroll until TX TIMEOUT is highlighted and press OK Softkey 1 The TX TIMEOUT Menu will appear as in Figure 61a Use the UP DOWN A V button to scroll between OFF and the 4 timeout settings of 30 60 90 and 120 seconds Highlight the selection you want and press OK Softkey 1 to make that selection and return to the main screen or press EXIT Softkey 2 to return to the Main screen without making a change SETTINGS Ts TIMEOUT ROGER BEEP TH TIMEOUT DE Exit Fig 60 Fig 61a Ts TIMEQUT Ts TIMEOUT 66 SECONDS DE EMIT OK EXIT Fig 61b Fig 61c 4 3 4 5 KEY BEEPS When pressing buttons on the front keypad a beep sound will be heard indicating a button has been pressed This feature can be turned On or Off The default setting is ON To access the KEY BEEP menu from the SETTING
31. lease allow approximately 2 to 3 weeks before contacting TriSquare for return status If your radio or accessory is in warranty upon receipt of your product it will either be repaired or exchanged at the option of TriSquare Electronics If the radio or accessory is out of warranty a letter will automatically be sent informing you of the repair charge If 33 you have any questions please contact TriSquare at service trisquare us for assistance For products purchased outside the USA Please contact your local dealer for product service information 8 1 Warranty Limited 1 Year Warranty For Products Purchased in the U S A TriSquare Electronics Corporation warrants that its TriSquare eXRS Radios and Accessories and the component parts thereof will be free of defects in workmanship and materials for a period of one 1 year from the date of first consumer purchase This warranty may be enforced by the first consumer purchaser provided that the product is utilized within the U S A TriSquare will without charge repair or replace at its option defective eXRS radios products or component parts upon delivery to the TriSquare Factory Service department accompanied by proof of the date of first consumer purchase such as a duplicated copy of a sales receipt You must pay any initial shipping charges required to ship the product for warranty service but the return charges will be at TriSquare s expense if the product is repaired or
32. n either ear by removing the ear hanger by sliding it forward and positioning it on the other side and sliding it back on To transmit simply press the PTT button on the PTT VOX Control on the cord and speak in a normal clear voice When finished talking release the PTT button to receive 5 2 2 VOX Transmitting To use the headset in the VOX mode plug the connector into the headset jack on the side of your eXRS radio and put the VOX PTT switch on the cord into the VOX position NOTE The eXRS radio s VOX setting in the radio menu must be turned on to one of the 3 VOX sensitivity settings as described earlier in the manual Place the headset assembly ear hanger over your ear and position the earbud speaker to a comfortable fit which will position the boom mic on the side of your cheek To transmit simply speak in a clear normal voice When finished talking the radio will end the transmission and be ready to receive 6 General Product Care Your TriSquare eXRS two way radio will give you years of trouble free service if cared for properly Handle the radio with care and keep the radio away from dust and water When not using your radio or storing it remove the batteries and store radios in a dry place Avoid exposure to extreme temperatures 7 Trouble Shooting Issues Unit does not receive a signal Verify that both units are on the same operating channel Reselect the current channel to re sync the radios Verify that batteries
33. ntries you can use the UP DOWN A F scrolling button to move between entries You can use the BACK 4 button to return to the Main Screen without changing channels Should you wish to switch to this new Group Channel scroll down to highlight the entry TEAM 1 as in Figure 19 and press the SELECT Softkey 1 You will return to the Main Screen as shown in Figure 20 To add additional Group Channel entries repeat the steps listed above CONTACTS CONTACTS J gt MY RADIO MY RADIO CHAMMELs TEAM 1 TEAM 4 TERR i SELECT VIEW SELECT VIEW HEHU Fig 18 Fig 19 tion within the Contacts list VIEW to view or verify any information within the Contacts list press CONTACTS on the Main Screen Softkey 1 to le 4 2 2 1 VIEW CHANGE DELETE CONTACTS You have the ability to view change edit or del te any of the informa enter the Contacts menu Figure 21 Use the UP DOWN A F button to scroll and highlight the Contact you wish to view When highlighted press VIEW Softkey 2 to display the information for that contact example in Figure 22 Press EXIT Softkey 1 to return to the Main Screen CONTACTS GROUP CONTACT MY RADIO TEOM 4 TEAM 1 AGGLOGLOGI SEa ERIT CHANGE Fig 21 Fig 22 ENTER NAME ENTER CHANNEL TEAM 1 DELETE DONE DELETE DONE Fig 23 Fig 24 CHANGE to modify any contact information highlight and VIEW Softkey 2 the contact as de
34. o hear the entire communications Use of VOX mode may take some practice to get familiar with its operation 20 TriSquare Electronics Corporation J MENU CHAHHEL HORA RADIO E ugs CONTACTS MENU OK EXIT Main Screen Fig 48 UD UDK DFF LEVEL 2 LEVEL 1 REVERSES DE EXIT OK EXIT Fig 49a Fig 49b u VOX ICON CHEMMEL Fig 50 Ei CONTACTS MENU o 4 3 4 RADIO SETTINGS Settings is the location in the menu system where various internal radio settings are modified To get to the Settings Menu Press the MENU Button on the Main Screen Softkey 2 to get into the Radio Menu Figure 51 Then scroll to highlight SETTINGS and Press OK Softkey 1 The screen in Figure 52 will appear allowing you to scro following Radio Settings options between the the amo ones MENU SETTINGS Roger Beep uo RING TONES TX Timeout SETTINGS CALL ALERT Key Beep x 7 Private Channel See I toe au Cloning Fig 51 Fig 52 4 3 4 1 RING TONES When another eXRS user on your same channel presses their CALL Button to alert you the TSX300 receiving the CALL has the option of playing a pre selected Ring Tone The TSX300 has 5 Ring Tone choices The default setting is Ring Tone 1 To access the RING TONES menu from the SETTINGS Menu scroll until RING TONE is highlighted Figure 53 and press OK Softkey 1 The screen view in Figure 54a will appear 21 Use the UP
35. or mount position Insert either the radio facing forward or the battery pack with the label facing backwards and the RED charging light will illuminate If the charging light does not light slightly jiggle the radio or battery pack to ensure a good connection is being made and the light is on If batteries are totally discharged recharge for 15 hours to fully charge batteries After charging remove and use as needed When not using your desktop charger unplug and store in a dry location 5 2 VOX PTT Headset TSX HS1 Operation The TriSquare TSX HS1 PTT VOX headset consists of 4 components 1 the headset with boom mic assembly 2 the PTT VOX Control on the cord 3 Lapel Clip and 4 the connector The headset can be used as a headset operating in a standard Push To Talk PTT method or automatically transmitting using your voice to activate the transmitter VOX PTT Button a Switch PTT Button and VOX PTT Switch Headset Plugged In 31 5 2 1 PTT Transmitting To use the headset in the PTT mode first plug the connector into the headset jack on the side of your eXRS radio and make sure the VOX PTT switch on the cord is in the PTT position NOTE The eXRS radio s VOX setting in the radio menu must be in the OFF setting Place headset assembly ear hanger over your ear and position the earbud speaker to a comfortable fit which should position the boom microphone on the side of your cheek The headset can be worn o
36. rate at a duty factor not to exceed 50 In August 1996 the Federal Communications Commissions FCC adopted RF exposure guidelines with safety levels for handheld wireless devices Important To maintain compliance with the FCC s RF guidelines hold the transmitter at least 2 inches 5 centimeters from your face and speak in a normal voice with the antenna pointed up and away If you wear the handset on your body while using the headset accessory use only the TriSquare supplied belt clip for this product and ensure that the antenna is at least 1 inch 2 5 centimeters from your body while transmitting If the distance between the antenna and the body is LESS THAN 1 0 2 5 cm do not use this device in the body worn configuration Use only the supplied antenna Unauthorized antennas modifications or attachments will void any warranty and could damage the transmitter and may violate FCC regulations Normal Position Hold the transmitter approximately 2 from your face and speak in a normal voice with the antenna pointed up and away 9 PATENT PENDING This radio has 1 or more Patents Pending with the United States Patent and Trademark Office TriSquare Model TSX300 TriSquare Electronics Corporation 1420 NW Vivion Rd Ste 109 Kansas City MO 64118 www trisquare us Document Number TR000022 052 Rev A Printed in China 36 TriSquare Electronics Corporation
37. rt Roger Beep TX Timeout Timer Key Beeps Silent Operation Private Channel Radio Cloning Copy From Clone Radio All Contacts Select Contacts Copy To Change Cloning Channel eXRS Accessories Dual Desktop Charger VOX PTT Headset PTT Transmitting VOX Transmitting General Product Care Troubleshooting Product Service Warranty Information FCC Licensing Information Safety Information Patent Pending Information ARBAnUHHRWN Ni N N WWWNN bo WWWWWWWWWWWWWWWWWWWNNNNNNN RAARRRRARARRARR RONDO NNN B 10 9 000 NO O UU A AA AAA AAA AAARALARARALARWWWWWWWWWWWNNu WN 1 Introduction Welcome to eXtreme Radio Service eXRS TriSquare has revolutionized 2 way radio communications with the eXRS radios What is eXRS It uses a stealth military technology redesigned by TriSquare for general use and operates using Frequency Hopping Spread Spectrum FHSS technology in the 9OOMHz ISM frequency band eXRS radios provide private and secure communications without interference and provide the longest range possible compared to other UHF radios With advanced digital technology you get unmatched clarity and years of trouble free service eXRS radios do NOT require an FCC license and can be used by people of all ages for any personal or business purpose The usable range of eXRS is equivalent to or greater than that of other portable UHF two way radios including FRS GMRS Usable range of UHF radios varies significantly with t
38. scribed above From the 13 Contact information screen in Figure 22 press CHANGE Softkey 2 to re enter the information for that contact starting with the ENTER NAME screen in Figure 23 Change the name as desired using the BACK NEXT buttons lt P gt along with the Alpha Nu meric keypad Press DONE Softkey 2 to advance to the ENTER CHANNEL screen Figure 24 Again using the BACK NEXT buttons along with the keypad enter the desired channel When change is complete press DONE Softkey 2 in Figure 24 to return to the Main screen DELETE to delete a contact highlight and VIEW the contact as described above Press CHANGE Softkey 2 to advance to the ENTER NAME screen in Figure 23 Press DELETE Softkey 1 repeatedly until the name is completely removed Press DONE Softkey 2 to delete the contact and return to the Main screen NOTE You can delete a contact by deleting the Channel number in the same manner as the name o 4 2 3 PRIVATE CHANNEL A Private Channel is any Channel associated with another radio s MY RADIO channel A Private Channel is used to contact specific radios regardless of what chan nel the radios you are trying to contact are on Private Channels are entered into the Contacts list through the Settings Menu which is detailed later in this manual under SETTINGS o 4 2 3 1 PRIVATE CALL When you receive a call on your Private Channel your display will indicate a PRIVATE CALL is being received
39. the same channel and you cannot communicate your radios may not be properly synced for frequency hopping A simple way to ensure 6 TriSquare Electronics Corporation proper synchronization is to re select or re enter the contact channel on the affected radios 3 2 Menu System and Softkeys The keys on the top right and top left of the radio keypad are Softkeys Softkey 1 and Softkey 2 and their function corresponds with what is on the bottom corners of the LCD display Thus the function of these two buttons change depending on what menu or function you are working in and what the LCD display shows for the key function at any given time When standing by on the main screen the functions of these two softkeys are CONTACTS and MENU From here these buttons are used to retrieve the Contacts list and access the radio s Menu System 3 3 Volume Control Up Down Scrolling Button While on the Main screen Press the ur A and Down F button to control the volume in 15 steps The display will indicate Volume and the current volume level for 2 seconds An audio chime will also indicate current volume level All key beeps will be at the set volume level While in the Contacts and Menu functions this button is used to scroll Up or Down through the Contact list or Menu options 3 4 Low Battery Alert The TSX300 has a 4 level battery meter shown below on the LCD that will graphically emulate the remaining batter power
40. ugh the internal or an external microphone The radio has 3 VOX sensitivity settings to adjust the voice volume needed for transmission activation The default setting is VOX OFF To access the VOX Mode Menu from the Main Screen Press the MENU button Softkey 2 use the UP DOWN A V button to scroll and highlight VOX as shown in Figure 48 Press OK Softkey 1 to enter the VOX Menu as shown in Figure 49a To activate VOX mode select 1 of the 3 sensitivity levels using the UP DOWN A F button to scroll through the choices shown in Figures 49a and 49b NOTE Level 3 is the most sensitive used when background noise is minimal and Level 1 is least sensitive used when background noise is present Once you have selected your choice by highlighting it press the OK button Softkey 1 to activate the VOX function To exit with out activating VOX press the EXIT button Softkey 2 to return to the Main screen IF VOX is active the VOX icon will be shown on the LCD display on the Main screen as in Figure 50 NOTE If you turn the power off while in the VOX mode VOX mode will be cancelled The next time you turn on the radio it will be in the normal PTT communications mode VOX TIP When the VOX mode is active radio receivers may miss the beginning of a communication because it takes the voice audio longer to activate the transmitter Experienced radio users will draw out their first word or repeat it to allow the receiver t
41. ur radio settings MY RADIO and all contacts information Highlight CLONE RADIO and 27 press OK Softkey 1 The next screen is for confirming your desire to clone the radio It asks DUPLICATING RADIO press OK Softkey 1 to continue You will advance to a screen asking you IS RECEIVING RADIO READY Make sure the receiving radio says READY TO RECEIVE If so press OK Softkey 1 to start the Cloning process The display will indicate CLONING IN PROCESS and once completed the display will indicate CLONING COMPLETE Press OK Softkey 1 and the radio will return to the Main screen on channel 0 NOTE You can press EXIT Softkey 2 at any time during the series of Menus to abort Cloning and return to the Main screen 4 3 4 8 1 ALL CONTACTS choose this option to copy all contacts excluding My Radio to another radio Highlight ALL CONTACTS and press OK Softkey 1 The COPY ALL CONTACTS screen will appear then press OK Softkey 1 to advance to the screen asking you IS RECEIVING RADIO READY Make sure the receiving radio is ready to receive When ready press OK Softkey 1 to start the Cloning process The display will indicate CLONING IN PROCESS and once completed the display will indicate CLONING COMPLETE Press OK Softkey 1 and radio will return to the Main screen on channel 0 CLONE RADIO ALL CONTACTS SELECT CONTACTS TOPY FROM TOPY FROM COPY FROM
42. xl TriSquare eXtreme Radio Service Model TSX300 Owner s Manual TSX300 Owner s Manual Front View Call Outs include 1 Antenna 2 PTT Button 3 Accessory Headset Jack 4 Power On Off Button 5 LCD Display 6 Softkey 1 7 Softkey 2 8 UP Down Volume and Scroll Button 9 Call Back Button 10 Lock Next Button 11 0 9 Alphanumeric Keypad 12 Microphone 13 Speaker Rear View Call Outs include 14 Belt Clip 15 Battery Compartment Door 16 Charging Contacts Backlit LCD Call Outs 17 Audible amp Vibrate Icon 18 Test Message Icon 19 VOX Icon 20 Keypad Lock Icon 21 Battery Low Icon 22 Channel User Interface 23 Softkey Labels 18 19 20 DE a iD E VO A 177 PRIVATE CH GEORGE CONTACTS MENU 22 23 2 TriSquare Electronics Corporation Table of Contents ntroduction Getting Started nstalling Batteries nitial Radio Setup Basic Radio Functions ransmit and Receive Menu System and Softkeys Volume Control Up and Down Scrolling ow Battery Alert Call Back Functions Call Function Back Function Keypad Lock Next Function ock Function Next Function Other Radio Functions and Features Channel Selection Contacts My Radio Group Channels View Change Delete Group Contacts Private Channels Private Call Call Waiting Radio Menus Text Messaging NOAA Weather Radio VOX Voice Activated Transmitting Radio Settings Ring Tone Call Ale
Download Pdf Manuals
Related Search