Philips WAS7000 Wireless Music Station
Contents
1. To detach the stand from Station a As shown hold down the Lockeunlock button s b Move out the stand to detach 41 PHILIPS Meet Philips at the Internet http www philips com Be responsible Respect copyrights Need help Online Go to www philips com support wd WAS 7000 CLASS 1 LASER PRODUCT 3141 075 21711 connected C Royal Philips Electronics N V 2006 Printed in China PDCC 20062. necessary press repeatedly to enter previous 02 Time To Say option lists 03 Canon Press the navigation controls amp or W repeatedly i and P to select the option Radio_02 Press VIEW to return to the playback screen if necessary Use the alphanumeric keys to input the key words maximum 8 characters see Preparation Using Alphanumeric Keys JAHD 01 En Aranjuez con 02 Time To Say REC MARK UNIMIARK O3 Canon Radio UO 6 2 2 Searching by keywords Mag MA The keyword should be the first letter or word of the title of the track you wish to search for By inputting a keyword you can quickly find all the items containing the word note that it is case sensitive Use the navigation controls 4 P A lV to enter the desired option list of tracks albums Press OK to start searching gt Display shows Searching Searching starts from the beginning of current option list gt The matched items appear at the top of the list gt The option list remains unchanged if no match is found Searching disappears aaa yates Press STOP E to stop searching On the remote control press SEARCH gt A text box appears on the display Helpful hints The searching will also stop when you select another source you switch off the set m CD MP3 CD HD SOURC close matches In HD mode please enter the second level any folder to search Ifno match is
3. Change the way the Station connects to an external Wi Fi wired network Check that the set is switched on see Basic functions Press MENU to enter the menu screen Press the navigation controls A or W and gt to enter Settings followed by Restore settings JAHD Display Language Firmware Press P to select Yes The set is rebooted Language selection screen appears O Select your desired language English Fran ais Espanol Nederlands Italiano or Deutsch gt The set enters Installation Mode The search for Station starts The Wi Fi connection is being re established 37 14 Firmware Upgrade 14 1 Firmware upgrade You can upgrade your WAS 000 Station with the supplied PC Installer CD Wireless Audio Device Manager WADM 0 Register your WAS7000 on www club philips com Download the firmware upgrade file and store it on your PC Connect your VWWAS 000 to power supply O Connect your WAS 000 to PC via the supplied ethernet cable install and launch WADM The PC shows as below SLA ao Fe sere He PHILIPS Device connected Wireless Musk Stabon WAS7000 Configure the network settings of the device Firemware upgrade CD Database update ete Click Device Configuration he PC shows as below nefi T Doe sr PHILIPS Click to enter the Firmware Upgrade sub menu roaa eats toes Sones eons DaS 08 08 2 a TRAT EET TLE ao r Jgs PHILIPS Click Firmw
4. HD USB UPnP skips searches tracks passage backward forward in playback screen fast scrolls the option list Radio tunes to radio stations gt confirms selection Text input confirms input and moves the cursor forward OK Confirm selection Starts playing VOL adjusts the volume level REPEAT selects continuous playback SHUFFLE selects random playback INCR SURR selects surround sound effect RDS NEWS Radio selects RDS information HD UPnP AUX turns NEWS function on or off MUSIC FOLLOWS ME HD moves music playback between Center and Station MUTE switches the sound off temporarily 11 2 Controls 3 O 0000 00 8 12 CD MP3 CD works with WAC7000 Center only HARDDISK HD selects HD hard disk source In standby mode switches the set on and selects HD source SOURCE selects Radio source UPnP source USB source or AUX from an additional connected appliance In standby mode switches the set on and selects Radio source USB source UPnP source or the audio input from an additional connected appliance REC works with WAC 000 Center only MARK UNMARK works with WAC 000 Center only MENU enters or exits setuD menu SCROLL scrolls the display screen upward or downward Alphanumeric keys for text input PROGRAM Radio manually programs preset radio stations SAME GENRE HD plays all the tracks of current Genre SAME ARTIST HD plays all the tra
5. 6 2 4 Selecting tracks of a particular genre 6 2 5 Selecting a track in current album during playback 6 2 6 Finding a passage within current track during playback 6 3 Different play modes REPEAT SHUFFLE 23 6 4 SMART EQUALIZER 25 6 5 Viewing track information 24 6 6 Moving music playback between Center and Stations 24 25 6 6 MUSIC FOLEOVW 5 ME 6 6 2 MUSIC BROADCAST 6 7 Viewing system information 25 7 0 FM radio 7 1 Tuning to radio stations 26 7 2 Storing preset radio stations 26 27 7 2 1 Autostore automatic programming 7 2 2 Manual programming 7 2 3 To listen to a preset station Ta RDG I LA NEWS 74 1 Activating NEWS 7 4 2 Deactivating NEWS 8 External sources 8 1 Playing or recording to USB mass storage device 28 29 8 1 1 About the USB device 8 1 2 Playing music from the USB device 8 2 Playing other external sources A Contents 9 UPnP Universal Plug and Play 9 1 About UPnP 30 9 1 1 About the UPnP enabled device 9 2 Connecting to the UPnP device 30 9 3 UPnP playback 30 9 3 1 Playing music from the UPnP device 10 Sleep 31 11 Alarm 11 1 Setting alarm _ 32 11 1 1 Setting alarm time 11 2 Activating deactivating alarm 32 11 2 1 Stopping alarm sound 11 2 2 Activating deactivating alarm 12 Network setting 12 1 Adding Additional Station to the Wi Fi net
6. All the stored music track information can be streamed and played on the Station via at the bottom elapsed playing time and total Wi Fi playing time Check that the set is switched on dho IMPORTANT also check that the Center is switched on or in standby mode D1 En Aranju Press SOURCE once or more times to select Albu HD or press HD on the remote control DEB Classical gt Display shows HD and the categories of your music library Playlists Artists Albums Genres e 036 327 All tracks x J FAHD To pause playback press PIM To resume Playlists playback press the button again Artists To stop playback press STOP E Album CD MP3 CD HD SOURCE SEARCH Seme S G All tracks es 9 Be l l I Playlists collection of your favorite tracks b r sorted by the name of the playlists in alphanumeric order C Artists collection of albums sorted by artist name in alphanumeric order Albums collection of albums sorted by album name in alphanumeric order Genres collection of albums sorted according to music style All tracks tracks sorted by track name in alphanumeric order Press the navigation controls A or W and to select your option Press PH to start playback Press PII on a highlighted artist genre or album to start playback from the beginning of the item 21 6 HD Located on Center 6 2 Selecting and searching 6 2 1 Selecting a different option 01 En Aranjuez con
7. News Pop Music RDS radio text GB Radio 102 00 ima Fock Hews 7 FM radio 7 4 NEWS You can activate NEWS while listening to HD USB UPnP or AUX source on WAS7000 The set will tune to the news radio station if the related signals are received from a RDS station 7 4 1 Activating NEWS During playback in HD USB UPnP or AUX source press RDS NEWS on the remote control SLEEP 5 oO MUSIC BROADCAST MUSIC FOLLOWS ME CN lN CN gt The icon appears and NEWS ON is displayed briefly gt Playback continues when the set scans the first 10 preset stations gt When news transmission is detected the set will switch to the news station The icon starts flashing Helpful hints Make sure that you have stored RDS stations in the first 10 preset locations see Autostore automatic programming If no news transmission is detected during the scanning of the set the icon disappears and NO RDS NEWS is displayed 7 4 2 Deactivating NEWS Press RDS NEWS again on the remote control Switch the set to Radio source gt The icon disappears and NEWS OFF is displayed briefly 27 8 External sources 8 1 Playing USB mass storage device You can playback music from a USB mass storage device on the Station 8 1 1 About the USB device Compatible USB mass storage devices The following devices can be used on the Station USB flash memory USB 2 0 or USB
8. OK to close the text box and move to the next option list 17 5 18 Basic functions 5 1 Switching to standby on and selecting functions When the set is switched on press STANDBY ON ECO POWER to switch it to standby mode or press on the remote control The Red indicator lights up gt Display shows the connected or previously connected Center The screen will remain empty if no Center is found gt The time will be displaved appears if you have not set the clock To switch on press STANDBY ON ECO POWER on the set The set switches to the last source selected gt The Green indicator lights up OR Press the source button on the remote control e g HD SOURCE To select functions press SOURCE once or more times or press HD SOURCE on the remote control CO SEARCH Helpful hint CD MP3 CD source is only available on the Center 5 2 Switching to power saving mode In power saving mode the set s display and Wi Fi connection are turned off When the set is on press and hold STANDBY ON ECO POWER to switch it to power saving mode or press and hold on the remote control gt The Red indicator lights up The display is switched off To switch on press STANDBY ON ECO POWER The set switches to the last source selected Helpful hints In power saving mode the networking sound display language the tuner presets and the volume level ma
9. Station On the additional device Connect one end of the audio cable not supplied to the AUDIO OUT terminals on the additional device On the Station Connect the other end of the audio cables to the AUX IN terminals on the Station T playback audio output from the additional device press SOURCE to select AUX mode on the Station see External source Helpful hints If the connected device has only a single audio out terminal connect it to the AUX IN left terminal Alternatively you can use a single to double cinch cable but the output sound still remains as mono Always refer to the owner s manual of the other equipment for complete connection 3 Installation 3 4 Using AC power Make sure that all connections have been made before switching on the power supply Connect the AC power cord to the wall socket This switches on the power supply When the Station is switched to standby mode they will still be consuming some power To disconnect the system from the power supply completely remove the power plug from the wall socket Helpful hint Always press and hold STANDBY ON to switch the set to power saving mode before removing its power plug The rating label is located on the backside of the set For users in the U K please follow the instructions on page 2 15 4 Preparation 4 1 Setting
10. Y to select your option Treble 3 to 3 Bass 3 to 3 5 6 2 Bass adjustment Press DBB Dynamic Bass Boost once or more times to select your option DBB OFF by default DBB 1 DBB 2 or DBB 3 19 5 Basic functions 5 6 3 Incredible surround 5 8 Selecting languages Press INCR SURR once or more times to Press MENU to enter the menu screen toggle the surround sound effect on or off Use the navigation controls A or Y and gt gt Display shows IS or lS OFF to select Settings Press A or Y and P to select Language Press A or Y and P to select from English Fran ais Espa ol Nederlands Italiano or Deutsch 5 7 Display adjustment You can adjust the backlight and contrast settings of the display Press MENU to enter the menu screen Use the navigation controls A or W and to select Settings Press A or Y and P to select Display O Press lt gt Al Y to select your option Backlight Press A or W and P to select On or Off Contrast Press A or W to increase or reduce the contrast JHD ee 01 En Aranjuez con Contrast Helpful hint You can also toggle the Backlight on or off by pressing DIM on the remote control 20 6 HD Located on Center ga Dl Un Rt am The playback screen appears 6 1 Playing Hard Disk HD anne Ger Music is centrally stored in the 80GB hard disk in the middle current track name and some on the WAC7000 Center
11. a a F a Artist mozard nlassique 202 6 6 2 MUSIC BROADCAST MUSIC BROADCAST allows you to broadcast music from Center to Stations On the Stations Check that the Station is switched on or is already in standby mode see Basic functions On the Center In HD source select and play the album or playlist that you wish to broadcast to the Stations see HD Selecting and searching Press MUSIC BROADCAST to activate gt The icon appears on the Center and Stations A 5 second countdown starts Jap ax Aranjuez con s Artists The Classical DEB Classical p 0 00 3 27 gt On the Center and Stations The selected music starts to play simultaneously after the 5 second countdown JaHD La Broadcast starting in 5 seconds To stop MUSIC BROADCAST press STOP E on the Center Helpful hints To exit MUSIC BROADCAST on a Station press STOP on the Station To broadcast music to the Station again press STOP M on the Center and then activate MUSIC BROADCAST on the Center again MUSIC BROADCAST will also stop when the Center is put to standby mode or power saving mode the selected album or playlist has reached the end 6 7 Viewing system information Select Information on the Station a Press MENU to enter the menu screen b Press the navigation controls A or W and gt to enter Information menu The display shows System WIFI and Ethernet J dHp Artis
12. found during the keyword search to press kad or gt gt on the remote control to find O OQO OQO 22 6 HD Located on Center 6 2 3 Selecting tracks of a particular artist During playback press SAME ARTIST gt Playback of tracks by the current artist continues after current track 6 2 4 Selecting tracks of a particular During playback press SAME GENRE gt Playback of tracks with the same genre as the current track continues after the current track 6 2 5 Selecting a track in the current album during playback In the playback screen press the navigation controls A or W briefly and repeatedly to select previous or next tracks or ka a or gt on the remote control 6 2 6 Finding a passage within the current track during playback In the playback screen press and hold the navigation controls A or W or kaa or BPI on the remote control gt The track plays at a high speed When you recognize the passage you want release A or W or ka or BPI on the remote control gt Normal playback resumes MARK UNMARK 6 3 Different play modes REPEAT SHUFFLE E plays the current track continuously pE repeats all the tracks under current Artist Genre or Album E DA repeats all the tracks under current artist genre or album in random order EE tracks under current artist genre or album are played in random order During playback press REPEAT or and SHUFFL
13. 07 000 12 Network setting O As prompted select Yes to apply the settings UPnP device lt Internet ee CT SL modem Acces Ant ETHERNET for illustration only Helpful hint You can connect the Center or Station directly to your PC using the supplied Ethernet cable and the Wireless Audio Device Manager WADM in the bypacked PC Suite CD For details see the manual Connect to your PC External wired network PC with WADM installed for illustration only 35 12 Network setting 12 4 Viewing connection status 12 4 1 Viewing the connection with external network oO Check that the Station is in HD source Select Information on the Station a Press MENU to enter the menu screen b Press the navigation controls A or V and gt to enter Information menu The display shows System WiFi and Ethernet Press the navigation controls A or W and gt to select WiFi or Ethernet The display shows In Wi Fi information about the Wi Fi settings on the set In Ethernet information about the Ethernet settings on the set dHD i Artists System Ethernet 36 13 Reset 13 1 Reset If desired you can restore the Station to their default settings including the network settings When to reset the Station Resetting the Station helps to re establish the Wi Fi connection between the Center and Station
14. 1 1 USB flash players USB 2 0 or USB1 1 Memory cards requires an additional card reader to work with the Station IMPORTANT In some USB flash players or memory devices the stored contents are recorded using copyright protection technology Such protected contents cannot be played on any other devices such as the Station MTP Media Transfer Protocol USB devices are not supported Supported formats USB or memory file format FAT12 FAT16 FAT 32 sector size 512 65 536 bytes MP3 bit rate data rate 32 320 Kbps and variable bit rate WMA v9 or earlier versions Directory nesting up to a maximum of 8 levels Number of albums folders maximum 99 Number of tracks titles maximum 999 File name in Uicode UTF8 maximum length 256 bytes The Station will not play or support the following Empty albums an empty album is an album that does not contain any MP3 WMA files and hence will not be shown on the display Non supported file formats are skipped This means that e g VVord documents or MP3 files with doc and dlf extension are ignored and will not be played WAV PCM audio files DRM protected WMA files WMA files in Lossless format and VBR format How to transfer music files from your PC to a USB mass storage device You can easily transfer your favorite music from your PC to a USB mass storage device just by dragging and dropping your mu
15. E once or more times to select play modes To return to normal playback press REPEAT or and SHUFFLE repeatedly until the various modes are no longer displayed SCROLL O O PROGRAM Ga SAME ARTIST INCR SURR DIM RDS NEWS N EN AN 6 4 SMART EQUALIZER This function enables you to playback music of the current genre with the matched sound settings During playback press SMART EQUALIZER gt The icon appears if SMART EQUALIZER is activated To deactivate SMART EQUALIZER adjust the sound settings DBB Incr Surr or Equalizer gt The icon disappears 23 6 HD Located on Center 6 5 Viewing track information D Press VIEW on the remote control once or more times to enter the playback screen 401 En Aranjuez con 02 Time To Say 03 Canon Radio DO Radio O03 Press gt gt The display shows the track information e g track name file type file size bit rate of mp3 wma files J aHD 01 En Aranju MIPS Various Artists The 7407 320kb ps Ja Techno Press VIEW once or more times to return to the playback screen 6 6 Moving music playback between Center and Stations Via Wi Fi music playback can be moved between the Center and Stations Even in different parts of your home you and your family will still be able to enjoy and share music with ease 6 6 1 MUSIC FOLLOWS ME As you move around at home let the music move with you betwe
16. USB mass storage device On Station you can playback music from a USB mass storage device Insert the USB device s USB plug into the socket 14 Se on the Station For the devices with USB cable Insert one plug of the USB cable not supplied to the socket on the Station Insert the other end of the USB cable into the USB output terminal of the USB device To playback music from the USB device press SOURCE once or more times to select USB source see External source Helpful hints The Station only supports USB devices that adhere to the following standards USB MSC Type 0 File system in FAT12 FAT16 FAT32 Operations based on simple folder based navigation also known as a normal FAT file system and not based on proprietary track database The following USB devices will not be supported by the Station MIP based or Dual mode adhering to both the MSC and MTP standards devices as the Station does not support browse play and export functions using the MTP protocol Products with database based UI Artists Albums and Genre based navigation as these products normally store music files in a specific hidden folder and uses embedded proprietary track database that the Station is unable to read properly 3 3 3 Connecting to other additional devices It is possible to play audio output from an external source e g TV VCR Laser Disc player DVD player on the
17. Wireless Music Station WAS7000 User manual POWERED BY D gracenote LGPL Library written offer This product contains Linux 2 4 27 vrsl that is made available under the GNU LGPL license version 2 1 hereafter called the Library Philips Electronics Hong Kong Ltd hereby offers to deliver or make available upon request for a charge no more than the cost of physically performing source distribution a complete machine readable copy of the corresponding source code of the Library on a medium customarily used for software interchange Please contact Head of Development BLC Audio PDCC Development 5 F Philips Electronics Building 5 Science Park East Avenue Hong Kong Science Park Shatin Hong Kong This offer is valid for a period of three years after the date of purchase of this product GPL Package written offer This product contains Linux 2 4 27 vrsl that is made available under the GNU GPL license version 2 hereafter called the Program Philips Electronics Hong Kong Ltd hereby offers to deliver or make available upon request for a charge no more than the cost of physically performing source distribution a complete machine readable copy of the corresponding source code of the Program on a medium customarily used for software interchange Please contact Head of Development BLC Audio PDCC Development 5 F Philips Electronics Building 5 Science Park East Avenue Hong Kong Science Park Sh
18. are upgrade he PC shows as below 38 Wait until wait for firmware shows on the WAS7000 display Click Refresh 2 icon The PC shows as below Qu 5 atime OSs EON MaDe s om n orr Jg PHILIPS Click Browse and find the location where yOu kept the firmware upgrade file on your PC Click me m uses e Apply to start upgrading firmware Om 5am Leos PHILIPS On Philips Wireless Music Station gt The display shows Updating firmware please wait WAS 7000 will reboot itself during the installation process gt When the installation is completed the PC shows as below and the WAS 000 will return to UPnP mode W am Peete Pet oe q3 Qu O J Ape em O y dd RA FERMAARE UPGRADE IMPORTANT Never interrupt the firmware upgrading before its completion Before finishing the installation never operate other functions WARNING Never try to repair the system yourself as this will invalidate the warranty Do not open the system as there is a risk of electric shock If a fault occurs first check the points listed below before taking the system for repair If you are unable to resolve a problem by following these hints consult your dealer or Philips for help 15 Troubleshooting Problem Solution During the first time setup the display on the Station shows Searching for Center I get interference on my wireless Wi Fi link between the Center a
19. atin Hong Kong This offer is valid for a period of three years after the date of purchase of this product 1 General information 1 1 About WAS7000 5 1 2 Supplied accessories gt 1 3 Philips on line support 6 1 4 Environmental information 7 1 5 Maintenance 7 1 6 Safety information 8 2 Controls 2 1 Controls on the Station 9 10 2 2 Station s remote control 11 12 2 3 Icons on LCD display 12 3 Installation gt Pacina Sao 3 2 Setting up Wi Fi connection between Center and Station ___1 3 3 3 Rear connections 14 15 3 3 1 Connecting antennas 3 3 2 Connecting a USB mass storage device 3 3 3 Connecting other additional device 3 4 Using AC power 15 4 Preparation 4 1 Setting clock 16 4 1 1 Viewing clock 4 2 Using the remote control 17 4 2 1 Inserting batteries into the remote control 4 3 Using navigation controls 17 4 4 Using alphanumeric keys 17 5 Basic functions 5 1 Switching to standby on and selecting functions E 5 2 Switching to power saving mode 18 5 3 Auto standby 19 5 4 Volume control 19 So MUTE 17 5 6 Sound control 19 20 5 Display adjustment 20 5 8 Selecting languages 20 Contents 6 HD 6 1 Playing Harddisk HD 21 6 2 Selecting and searching 22 23 6 2 1 Selecting a different option 6 2 2 Searching by key words 6 2 3 Selecting tracks of a particular artist
20. ble stations are programmed in the order of radio frequencies RDS stations followed by FM stations A maximum of 10 RDS stations will be stored from Preset 01 to Preset 10 To select Autostore radio a Press MENU b Use the navigation controls A or W and gt to select Autostore radio gt Display shows Autostore Please wait gt After all the stations are stored the first autostored preset station will then play automatically 7 2 2 Manual programming Tune to your desired radio station see Tuning to radio stations Press PROGRAM on the remote control The display shows J J Ge 6 AME GENRE SA TIST IN SLEEP GB Radio Save frequency to Preset Press OK to confirm On the Station press A or W or the Numeric Keypad 0 9 to select your desired preset number O Press OK gt Current radio station is stored to that preset location 7 2 3 To listen to a preset station Press 4 to enter the list of preset stations Use the navigation controls amp or W followed by gt to select the desired station 7 3 RDS RDS Radio Data System is a service that allows FM stations to send additional information along with FM radio signal Tune to the desired RDS radio station see Autostore automatic programming The display shows the following information if available name of the radio station radio frequency program type for example
21. ce The UPnP device can be a PC or other devices running UPnP software To use the UPnP device with the Station Connect the Station to the UPnP device s network see Connecting to the UPnP device To play the music library of your UPnP device on the Station check that the UPnP server software is properly installed and enabled on the device e g Philips Media Manager in the by packed PC Suite CD Musicmatch Window Media Connect 9 2 Connecting to the UPnP device When connecting to the UPnP device s network you have the following options Connect wirelessly or through an Ethernet cable Connect both the Center and Station Center only or Station only For more information on the connection see Network setting Connecting to external Wi Fi network and Connecting to external wired network 9 3 UPnP playback In the external Wi Fi or wired network music is streamed between devices via UPnP 24 9 3 1 Playing music from the UPnP device Check that the UPnP device is switched on Switch off the firewall running on the UPnP enabled PC Check that the Station is connected to the UPnP device s network see Network setting Viewing connection status On the Station press SOURCE on the remote control to select UPnP mode gt The display on the set shows a list of connected UPnP devices up to 4 UPnP devices PMM S gt Server not found appears if there is no UPnP device found in the
22. cks of current Artist HD enable Wireless Range Extender refer to Extender s manual for details SLEEP adjusts displays switches off sleep timer DIM changes the brightness of display illumination MUSIC BROADCAST works with WAC7000 Center only SMART EQ HD selects the sound settings that matches the current Genre 2 3 Icons on LCD display Description iB Client connected iG Client not connected da Music Radio UPnP E Aux mode HD HD mode Radio mode USB mode Repeat all Repeat 1 Shuffle Alarm Music Broadcast Music follow me Mute E Ped X E i ms A L News Sleep Smart EQ WiFi connected Both WiFi and Ethernet connected Fas sal ON 3 1 Place Station With detachable stand and by packed wall mounting kits WAS 000 Station allow you to place them in two ways on desktops with stand or on wall without stand on wall without stand To learn more about wall mounting see Appendix How to mount your Station onto wall IMPORTANT Before you decide where and how to place your Station try the Wi Fi connection and rear connections to find a suitable location 3 Installation 3 2 Setting up Wi Fi connection between Center and Station You can add a station to an existing Wi Fi network of Center and Station Up to 5 WAS7000 stations can be connected to a WAC 000 Center The first time you set up a Wi Fi connection place the Center and Station side b
23. clock The time can be displayed in 24 hour or 12 hour format Press MENU to enter the menu screen Use the navigation controls A or W and to select Settings followed by Time Restore settings Firmware Alarm To set clock time a Press the navigation controls A W or Numeric Keypad 0 9 and gt to select Set Time gt The display shows current clock setting 00 00 by default b Press the navigation controls A W or Numeric Keypad 0 9 repeatedly to set the hour followed by the minute ogo r c Press OK to confirm the clock setting 16 Helpful hints To change to 12 hour or 24 hour format Inthe Time menu select Time Format see the above Step 2 Press A or VW andP to select your option The clock setting will not be saved when the set is disconnected from the power supply dJa HD 12 hours 4 74 hours 4 1 1 Viewing clock Press and hold WIEW button for about 5 seconds Clock will be shown briefly on the display Helpful hint In standby mode you may press View button briefly to turn on the LCD backlight so as to view clock clearly Reset clock if the power cord is plugged off 4 Preparation 4 2 Using the remote control IMPORTANT The remote control might not be able to operate the other wireless music systems from Philips e g WACS700 WACSS5 Always point the remote control directly
24. e between the remote control and the set Insert the batteries with their polarities signs aligned as indicated Replace the batteries Point the remote control directly towards the IR sensor Adjust the volume Disconnect the headphones Switch off MUTE Check if the number of folders exceeds 99 or the number of titles exceeds 999 Only completely recorded MP3 WMA files can be found and played by WAS7000 Check if the file has been completely recorded DRM protected WMA files cannot be played on WAS7000 If the signal is too weak adjust the antenna or connect an external antenna for better reception Increase the distance between the set and your TV or VCR Install the supplied FM wire antenna for better reception Keep the Station at least 1 meter away from your PC Use the by packed wall mounting kits It is recommended that you get a qualified personnel to fix the mounting brackets safely onto your walls before you mount the or Station For details refer to Appendix How to mount your Station onto Walls Upgrade the Station via ethernet cable following steps below 1 Connect the Station to your PC via the supplied ethernet cable and power on the Station 2 Download the firmware upgrade file specified for station 3 Launch WADM and click Firmware upgrade 4 Follow the on screen information to complete the rest steps 16 1 How to mount your Station onto wall IMPORTANT The wall mountin
25. e navigation controls A or W and gt to enter Station Mgnt menu c Press A or W and P to select Add New Station You will enter Installation Mode Searching for the new station starts gt Playback stops on the previously associated Station if you are playing the HD source da HD Yul 4 Add New Station P Delete Station Station Status Helpful hints If there are 5 stations connected Add New Station option will not present In this case please delete a station first and then to add new stations On Stations Enter Installation Mode a Remove the power plug of the Stations and then connect them to the power supply again gt Connecting to Center appears b On the remote control press MENU to enter Installation Mode gt HD screen appears if the Station is connected to the Center gt The Center and the Stations are now in the same Wi Fi network 12 Network setting On the Center Press STOP E when all the Stations are found 12 1 1 Deleting a Station Center s Wi Fi network p oe x n E Se for illustration only Check that the WAC7000 Center is in HD source Select Delete Station a Press MENU to enter the menu screen b Press the navigation controls A or W and P to enter Station Mgnt menu c Press A or V and P to select Delete Station The list of connected Stations will be display
26. ed on the Center Press A or Y and P to select the Station yOu wish to delete Press A or V and P to select Yes 33 12 Network setting 12 2 Connecting to external Wi Select Automatic Fi network Helpful hint The external Wi Fi network can be a single PC You can also select Static and assign an IP address or a PC network as prompted using the alphanumeric keys O As prompted select Yes to apply the settings The Station is connected to the external Wi Fi network gt The Station will be disconnected from the Center s Wi Fi network For music playback within the external network see UPnP UPnP playback 12 2 1 Network setting on Station Check that the PC is switched on and the External Wi Fi network firewall is switched off ac Onthe Station search for networks UEP davies a Press MENU to enter the menu screen b Press the navigation controls A or V and gt to enter Settings followed by Network and Wireless c Press gt to continue The display shows Searching for Networks The list of networks appears The display shows Network Not Found if no network is found a Select the network where your desired UPnP device is located b Press to continue O if you have already set a WEP WPA key for the UPnP device network a Enter the WEP or WPA key by using the alphanumeric keys see Preparation Using Alphanumeric Keys b Press OK to confirm for illust
27. en the Center and Station or between Stations On the source unit Center or Station where music is playing In HD source select and play the album or playlist you wish to play on the destination unit see HD Selecting and searching Helpful hints Press II to interrupt playback if you want the playback to continue from where it has paused on the destination unit The selected play modes e g E DE will be retained on the destination unit see Different play modes REPEAT SHUFFLE Press MUSIC FOLLOWS ME to activate The icon appears Helpful hints MUSIC FOLLOWS ME will be automatically deactivated if you do not activate MUSIC FOLLOWS ME on the destination unit within 5 minutes To deactivate MUSIC FOLLOWS ME press MUSIC FOLLOWS ME again or press other function keys e g SLEEP or 4 gt A V On the destination unit Center or Station where the music will continue Check that the destination unit is switched on or is already in standby mode Press MUSIC FOLLOWS ME Playback of selected music stops on the source unit and continues on the destination unit The icon disappears To stop MUSIC FOLLOWS ME press STOP on the destination unit Helpful hints After activating MUSIC FOLLOWS ME on the destination unit make sure that the source unit is switched on or is already in standby mode you can select other tracks or source for playback 6 HD Located on Center
28. ep the system batteries or discs away from excessive moisture rain sand or any heat sources such as heating equipment or direct sunlight Place the set in a location with adequate ventilation to prevent internal heat build up in your system Allow at least 10 cm 4 inches clearance from the rear and the top of the unit and 5 cm 2 inches from each side Never cover the ventilation openings with items such as newspapers table cloths curtains etc as this will impede ventilation Never expose the set to water dripping or splashing Never place objects filled with liquids such as vases on the set Never place sources of naked flame such as lighted candles on the set The mechanical parts of the set contain self lubricating bearings and must not be oiled or lubricated CAUTION Visible and invisible laser radiation If the cover is open do not look at the laser beam High voltage Do not open You run the risk of getting an electric shock The set does not contain any user serviceable parts Modification of the product could result in hazardous EMC radiation or other unsafe operations Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation 2 Controls D PHI IPS 2 Controls 2 1 Controls on the Station Top a
29. evice is not supported by the Station File system not supported appears if unsupported file formats are used on the USB device dJa UsB All Tracks gt Empty Folder appears if no audio file is found on the USB device Press the navigation controls A or W and P to select your option Press gt Ito start playback Helpful hint Due to compatibility reasons the album track information may differ from what will be displayed through the flash player s music management software 8 2 Playing other external sources It is possible to play from an external source on the Station after connecting the audio output e g TV VCR Laser Disc player DVD player Check that the external device is properly connected see Installation Connecting other additional devices Check that the Station is switched on or is already in standby mode see Basic functions On the Station press SOURCE once or more times to select AUX 29 9 UPnP 9 1 About UPnP Universal Plug and Play The music collection on the UPnP enabled device can be played on the Station wirelessly or through an Ethernet cable supplied Universal Plug and Play UPnP builds on standard networking technologies and provides standardized protocols for a wide variety of home and small business devices It allows easy interoperability of all the devices supporting the networking technologies 9 1 1 About the UPnP enabled devi
30. g instructions are for the use of the qualified wall mounting person only Ask a qualified person to help you with the wall mounting which includes drilling holes on the wall fixing the mounting brackets to the wall and mounting the sets onto the brackets 1 x mounting bracket 2 x screws for Station T T mounting 16 1 2 What else you ll need 6x screws for fixing the Station s bracket Drilling tools e g electric drill 16 1 2 Preparation To find a suitable location for mounting try your necessary rear connections and the Wi Fi connection see the chapter Installation The qualified wall mounting personnel should learn about the piping wiring and other relevant information inside your walls to avoid unexpected damages according to the materials of your walls decide what type of screws you need to fix the mounting brackets that is able to withstand the weight of a Station according to the drilling requirements choose suitable drilling tools take other precautions necessary for the wall mounting work 16 Appendix 16 1 3 Mounting your Station Align the bracket in the chosen location on a wall Use a pencil to mark the drilling positions Drill holes as marked Fix the brackets to the wall using suitable screws not supplied As shown fasten the supplied screws to your Station using a screwdriver
31. les playback display and previous option list press and hold to view clock SAME ARTIST HD plays all the tracks of current Artist HD enable Wireless Range Extender refer to Extender s manual for details SAME GENRE HD plays all the tracks of current Genre SMART EQUALIZER HD selects the matched sound setting for current Genre MENU enters or exits setup menu Display shows status of the set Se jack for the external USB mass storage device O Y g Z uv real Qi go z Si DR O Z O m D m gt 7 A T PHILIPS 2 2 Station s remote control OD press briefly to switch on the set or to put it on standby mode press and hold to switch the set to power saving mode SEARCH searches by keywords lt lt gt skips searches tracks passage backward forward in playback screen lt lt Text input deletes the input before cursor gt il starts or pauses playback a stops playback LOMORI ze S leo 2 Controls DBB Dynamic Bass Boost turns the bass enhancement on DBB1 DBB2 DBB3 or off VIEW toggles playback screen and previous option list lt P AIV navigation controls left right up down to scroll through the option list lt HD USB UPnP returns to previous option lists Radio enters the list of preset stations Text input moves the cursor backward AIV
32. n on the alarm a Press A or W and to select Alarm On Off Peony E aa A b Press A or V and gt to select the desired gt Alarm On appears The icon FA appears repeat mode gt Once activates the alarm only once gt Daily repeats the alarm every day 4 Alarm On Off 11 2 Activating de activating alarm Repeat 11 2 1 Stopping alarm tone When the alarm tone is heard press any button The alarm tone will be stopped Your alarm settings remain unchanged Alarm Time in Alarm Time menu set the alarm time a Press the navigation controls A or V 11 2 2 Activating de activating alarm repeatedly to set the hour followed by the minute b Press OK to confirm Enter the alarm setting menu a Press MENU b Use the navigation controls A or W and P to select Settings followed by Alarm O To toggle the alarm on off a Press A or V and to select Alarm On Off b Press A or VW and to select On or Off 32 12 1 Adding Additional Station to the Wi Fi network on the Center Up to 5 Stations can be connected to the WAC7 000 Center When adding a Station to the Center s Wi Fi network you can play the Center s music library on the Station or move music playback between the Center and Stations see HD To add a Station to the Center s Wi Fi network proceed as follows On the Center Check that VWWAC7000 Center is in HD source Select Add New Station a Press MENU to enter the menu screen b Press th
33. nd Station The WACS7000 operates in the 2 4GHz radio frequency spectrum Many other household IT devices also operate in this frequency spectrum for example microwave ovens Dect phones bluetooth devices like bluetooth headphones computer mouse wireless routers cordless phones Wi Fi compatible printers PDAs These devices can interfere with the Wi Fi link between the Center and Station resulting in interference such as pause during playback slow response to your operation etc The severity of interference varies depending on the extent of radiation from the device and the strength of Wi Fi signals in that position Check that you have placed the Center and Station side by side on a flat and firm surface Check that you have connected the Center to the power supply When adding a new station check that the center is in Installation mode see Network setting Adding Additional Station to the Wi Fi network on the Center Turn off the wireless Access Point nearby if you encounter difficulty connecting the Center and Station If you are playing the set stop playback and take the appropriate measures as follows VY Keep the Center or Station at least 3 meters away from such devices Use the WEP WPA key when connecting the Center and Station to an existing wireless PC network To set WEP WPA key connect Center Station to your PC using Philips Wireless Audio Device Manager WADM in the by packed PC Suite CD In WADM s De
34. nd front panels STANDBY ON ECO POWER press briefly to switch the set on or to standby mode press and hold to switch the set to power saving mode or on Green indicator lights up green when the set is on Red indicator lights up red when the set is switched to standby mode or powersaving mode 2 SOURCE selects sound source HD hard disk Radio USB UPnP or AUX n standby mode switches the set on and selects sound source HD Radio USB UPnP or AUX MUTE switches the sound off temporarily lt P AIYV navigation controls left right up down to scroll through the option list lt HD USB UPnP returns to previous option lists Radio enters the list of preset stations Alv HD IUSBIUPnP skips searches tracks passage backward forward in playback screen fast scrolls the option list Radio tunes to radio stations OK confirms selection STOP stops playback VOLUME adjusts the volume level IR sensor for the infrared remote control Helpful hints Always point the remote control towards this sensor QA 10 Lay E MUSIC FOLLOWS ME HD moves music playback between Center and Station or between Station and Station MUSIC BROADCAST HD broadcasts music from the Center to the Station DBB Dynamic Bass Boost turns the bass enhancement on DBB1 DBB2 DBB3 or off INCR SURROUND selects surround sound effect VIEW togg
35. network Use the navigation controls A or W and P to select your desired UPnP device gt The music library of the UPnP device appears on the Station as it does on the UPnP device On the Station play UPnP device s music library in the same way as you play Hard Disk HD see HD EI UPP 4s Long as st Unknown Album AClassical he 1 01 E 2 10 1 SLEEP You can preset a certain period of time after which the Station will switch to standby mode On the remote control press SLEEP repeatedly to select the desired time period in minutes gt The display shows in sequence Sleep 15 30 45 60 90 120 Off gt Display shows the selected option briefly and returns to its previous status The icon Z7 appears ou Sleep 30 To view the countdown time to standby mode press SLEEP again To deactivate the sleep timer press SLEEP repeatedly until Sleep Off is displayed Press STANDBY ON ECO POWER to switch the set to standby or on the remote control 10 Sleep 31 11 Alarm 11 1 Setting alarm tits T set repeat mode for the alarm sound IMPORTANT a In the alarm setting menu press A or W and Before setting the alarm check that the to select Repeat clock setting is correct a HD ee Enter the alarm setting menu a Press MENU Alarm On Off b Use the navigation controls A or W and gt to Alarm Time select Settings followed by Alarm 4 Repeat b To tur
36. product WAS7000 is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The making of unauthorized copies of copy protected materials including computer programs files broadcasts and sound recordings may be an infringement of copyrights and constitutes as a criminal offence This equipment should not be used for such purposes 1 General information 1 3 Philips on line support Products from Philips have been designed and manufactured to the highest quality standards If your Philips Connected Planet product is not working correctly we recommend that you check the User Manual to verify that your product has been properly connected and configured To enhance your home entertainment experience our Connected Planet support website www philips com support offers you all the information you need to fully enjoy your product as well as the new additions to our exciting range of products Please visit www philips com support and enter your product name WAS 000 to VIEW FAQ Frequently Asked Questions Latest user manuals and PC software manuals Firmware upgrade files for WAS 7 000 Latest PC software downloads Interactive troubleshooting As it is possible for you to upgrade your product we recommend that you register your product on www club philips com so that we can inform you as soon as new and free upgrades are available Enjoy your WAS7000 1 4 En
37. ration only If there is no WEP WPA key for the UPnP device network Press OK to skip Helpful hint ForWEP WPA key setting always refer to the Access Point s user manual 34 12 3 Connecting to external wired network The external wired network can be a single PC a PC network or a Station The Station can access the wired and wireless network at the same time Using the supplied Ethernet cable you can connect the a Station separately to a wired network while maintaining its Wi Fi connection e g the Wi Fi connection between the Center and Stations or the Wi Fi connection with an external network 12 3 1 Network setting on Station Check that the device is switched on and the firewall if available is switched off Connect the supplied Ethernet cable to the Ethernet ports on the device and the Station On the Station search for networks a Press MENU to enter the menu screen b Press the navigation controls A or W and and 2 to enter Settings followed by Network and Wired c Press gt to continue O if you are using a DHCP enabled Access Point select Automatic DHCP stands for Dynamic Host Configuration Protocol It is a protocol for assigning dynamic IP addresses to devices on a network If there is no DHCP Select Static and assign an IP address and subnet mask as prompted using the alphanumeric keys see Preparation Using Alphanumeric Keys dHD T Set IP Address 4 192 168 1
38. sic files For a flash player you will be able to use its music management software for the music transfer However WMA files cannot be played due to compatibility reasons How to organize your MP3 WMA files on the USB mass storage device Root all titles Title 001 Title 002 Album 01 Title 001 Title 002 Album 02 Title 001 Title 002 Album 03 Title 001 Title 002 Organize your MP3 WMA files in different folders or sub folders as needed Helpful hints Others is shown as an album if you have not organized your MP3 WMA files into any albums on your disc Make sure that the file names of MP3 files end with mp3 and the file names of WMA files end with wma For DRM protected WMA files use Windows Media Player 10 or later for CD burning conversion Visit www microsoft com for details about Windows Media Player and WM DRM Windows Media Digital Rights Management 8 External sources 8 1 2 Playing music from the USB device External hard disk audio player a turn down the volume to avoid noise Check that the USB device is properly connected distortion to the Station see Installation Connecting a USB b press the PLAY key to start playback mass storage device O To adjust the sound and volume use the sound Press SOURCE once or more times to select controls on your external device or on USB WAS7O000 gt The icon appears No USB Device Present appears if the USB d
39. towards the IR sensor on the Station you wish to operate 4 2 1 Inserting batteries into the remote control Open the battery compartment Insert 2 batteries type RO6 or AA into the remote control with the correct polarity as indicated by the and symbols inside the battery compartment 4 Replace the compartment door CAUTION Remove the batteries when they are exhausted or when the remote control will not be used for a long time Do not use old and new or different types of batteries together Batteries contain chemical substances hence they should be disposed of properly 4 3 Using navigation controls When selecting options on the set you often need to use the navigation controls 4 P A V Press A Y to highlight an option Enter its submenu by pressing gt Press lt to return to the previous option list Press OK or P to confirm 4 4 Using alphanumeric keys Use the alphanumeric keys to input letters or numbers When the text box appears press the alphanumeric keys repeatedly until the desired letter number appears maximum 8 characters PROGRAM REPEAT SHUFFL Q I L N x gt 14 m O Press 4 P to move the cursor backward forward Helpful hint You will enter the previous next option list if the cursor reaches the beginning or end of the text box Press dd to delete the entry before the cursor 0 Press
40. ts WiFi Ethernet Press the navigation controls A or W and gt to select System The following information will be shown on the display the name of the Station firmware version J dHp Artists Wireless Music Center 0 32 26 FW version for illustration only 25 7 24 O 26 FM radio 7 1 Tuning to radio stations Connect the supplied FM wire antenna to the Station see Installation Check that the set is switched on or in standby mode see Basic functions Press SOURCE once or more times to select Radio gt Playback screen appears Display shows Radio the radio station frequency and a preset number if already programmed Press and hold A or W until the frequency in the display starts running GB Radio 108 00 Rock DEEZ The radio automatically tunes to a station of sufficient reception Display shows Searching during automatic tuning gt f a station is received in stereo 92 is shown gt When you are receiving an RDS station is shown Repeat Step 3 if necessary until you find the desired radio station To tune to a weak station press A or briefly and repeatedly until optimal reception is detected SCROLL 2 7 2 Storing preset radio stations You can store up to 60 preset radio stations in the memory 7 2 1 Autostore automatic programming Autostore automatically starts programming radio stations from Preset 1 Availa
41. vice configuration enter the Wireless Network sub menu and in Device Wireless Authentication Type select WEP or WPA Change the operating channel of the Center and Station when connecting them to an existing wireless PC network To change channels connect the Center Station to your PC using Philips Wireless Audio Device Manager WADM in the by packed PC Suite CD In WADM s Device configuration enter the SSID of your Wireless Network and select Ad hoc mode See the manual Connect to your PC and the WADM help file If possible change the operating channels of the other Wi Fi devices at your home Turn the devices in different directions to minimize interference 39 15 Troubleshooting Problem Solution Stations react when you operate the Center s remote control The remote control does not function properly Sound cannot be heard or is of poor quality Some files on the USB device are not displayed Radio reception is poor There is interference on the radio reception whenever the Station is near my PC How do I mount the Station onto walls Upgrading Station wirelessly failed Y X RKO O SSS be N S The remote control for the Center is powerful enough to operate several Stations within a certain distance or angle Check that you have placed the Stations in different rooms or place them at different angles Use the remote control for the Station or the controls on the set Reduce the distanc
42. vironmental information All redundant packaging material has been omitted We have done our utmost to make the packaging easily separable into three mono materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet The set consists of materials which can be recycled if disassembled by a specialised company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Disposal of your old product Your product is designed and manufactured with high quality materials and components which can be recycled and reused 7 When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your old product will help prevent potential negative consequences for the environment and human health Use a soft cloth slightly moistened with a 1 General information 1 5 Maintenance Cleaning the Set mild detergent solution Do not use any solutions that contain alcohol spirits ammonia or abrasives 1 General information 1 6 Safety information Place the set on a flat firm and stable surface Ke
43. work on the Center _ 33 12 2 Connecting to external Wi Fi network SS a 12 2 1 Network setting on Station 12 3 Connecting to external wired network 35 12 3 1 Network setting on Station 12 4 Viewing the connection with external network 36 13 Reset 37 14 Firmware Upgrade 38 14 1 Firmware upgradeing 38 15 Troubleshooting 39 40 16 Appendix How to mount your Station onto walls 41 1 1 About WAS7000 Up to 5 WAS7000 Stations can be connected to a WAC7000 Center You can centrally store up to 1500 audio CDs in the 80GB hard disk on WAC7000 All stored music will then be wirelessly streamed from the Center to the connected Stations via Wi Fi Your music enjoyment will no longer be restricted by the location of your CD player or PC nor the messy wiring With WAS7000 you will have the freedom to enjoy your favorite music anywhere at home Wi Fi or IEEE802 11 b g is the international leading industry standard for wireless broadband networking Digital data will be transferred with wider range and bandwidth 1 General information 1 2 Supplied accessories Remote control with 2 x AA batterys 1x FM wire antenna 1 x Ethernet cable 1x PC Suite CD 1 x Mounting kit This set complies with the radio interference requirements of the European Community Philips Consumer Electronics BG Entertainment Solutions hereby declares that this
44. ximum the moderate level will be retained in the set s memory 5 3 Auto standby When the set has reached the end of playback and remains in the stop position for more than 20 minutes the set will switch to standby mode automatically to save power 5 4 Volume control Check that playback has started Adjust the volume with VOL buttons gt Display shows the volume bar indicating the volume level JHD ae Volume 5 5 MUTE During playback you can temporarily switch off the sound without switching off the set Press MUTE X to switch off the sound gt The icon appears Playback continues without sound To switch on the sound press MUTE K again or adjust the volume with VOL gt The icon disappears CD MP3 CD HD SOURCE SEARCH 5 Basic functions 5 6 Sound control 5 6 1 Equalizer Equalizer enables you to select predefined sound settings Press MENU to enter the menu screen Use the navigation controls A or W and P to select Equalizer JAHD 01 En Aranjuez con Equalizer Settings Create Playlist Station hignt Press A or Y and P to select Rock Pop default Jazz Neutral Techno Classical or Bass Treble O Press OK or gt to confirm To set Bass Treble D Press MENU to enter the menu screen Use the navigation controls A or W and P to select Settings Press A or W and P to select Treble Bass O Press lt gt A
45. y side on a flat and firm surface a Connect the Center to power supply b Connect the Station to power supply Auto installation connection starts gt HD screen appears on the Center gt HD screen appears on the Station when the Station is connected to the Center Unplug the Center and Station Relocate as desired IMPORTANT Make sure that you have already powered up the Center before powering up the Station Avoid installing between thick walls The Center and Station should never be blocked by 2 or more walls Avoid placing the system near to large metal objects For better Wi Fi reception turn the Wi Fi antenna or adjust the location of the Center and Station Always press and hold STANDBY ON C to switch the set to ECO POWER power saving mode before removing its power plug 13 3 Installation 3 3 Rear connections Warning Never make or change the connections when the mains is switched on 3 3 1 Connecting antennas Extend the wire antenna and fit it to the FM ANTENNA as shown below Q N Optional To improve FM reception fit the plug of the wire antenna into the plug of the extension line sold separately as shown below Extend the extension line and move it in different positions for optimal reception as far away as possible from the TV VCR or other radiation sources Fix end of the extension line to the ceiling 3 3 2 Connecting a
Download Pdf Manuals
Related Search