Philips DCR2021 Digital Cable Receiver
Contents
1. on the receiver front panel for at least 5 seconds Your settings will not be lost Release the button and wait for the LED to turn either red for low power orange for standby or green for TV mode respectively You can then continue with normal operation On screen display working Poor reception signal but there is no reception Check the installation Geeignet f r PREMIERE Problem Intermittent reception Possible cause Faulty connections Action Check all connections and cable Check signal quality from the Scan item of the Premiere menu The picture is not sharp and on screen text is difficult to read TV SCART output format not set to RGB TV SCART not connected to the RGB capable SCART socket of your TV set Inappropriate SCART cable Change the TV SCART Output setting to RGB from the System Settings screen Refer to paragraph 10 5 2 Refer to your TV user manual Use the SCART cable supplied with your receiver The picture on some channels seems to have been stretched or squashed The broadcast is probably in wide screen and the receiver settings may not be correct Check the receiver TV screen format setting following the information in paragraph 10 5 1 If you have a wide screen TV you may also need to check the settings on your TV Even if you use the number keys you cannot access a particular channel The parental lock has been activated on this2. You can watch analogue TV while you record digital TV You can record the digital TV channel you are watching Some VCR or DVD recorders need to be in standby to use the Prepare Record or Record link feature Refer to your VCR or DVD user manual Geeignet f r PREMIERE 85 86 11 3 2 Digital Receiver and VCR or DVD settings Depending on your VCR or DVD brand and type set the Video DVD Recorder Control setting of your Digital Receiver to Prepare Record or Record Link Refer to your VCR or DVD user manual or try the two options to find out which is most suitable Set your VCR or DVD to Prepare Record or Record Link to allow control by your Digital Receiver 11 3 3 Recording with the VCR DVD Recorder Control feature Your Digital Receiver TV and VCR or DVD are connected and set according to paragraph 11 1 You have set a timer on your Digital Receiver At timer start your VCR or DVD starts recording and at timer end it stops recording under the control of your Digital Receiver You no longer need VCR or DVD programming to record digital TV channels Geeignet f r PREMIERE Geeignet f r PREMIERE 87 88 I2 Troubleshooting Please be aware that new software may change the functionality of your receiver Should you experience any difficulties with the operation of the receiver please consult the relevant section of this manual including this Troubleshooting section If the problem cannot be solved call your
3. Language options PHILIPS 10 3 1 Display options This screen is used to set display options according to your preferences 1 Select values for the following Banner Duration select a banner display duration PHILIPS senio srexe d from 2 to 8 seconds using the or P gt key Banner Transparency select On to enable banner transparency Channel Number Input Latency select the time lapse after which a number key press is taken into account from 1 to 5 using the or key Timer Warning Duration select a banner display duration from 15 seconds to 5 minutes using the lt or P key Geeignet f r PREMIERE 79 80 PHILIPS PHILIPS Remote control configuration 39 default factory setting or 38 alternative setting Carefully follow the instructions displayed on screen Once you have changed this setting the remote no longer operates the receiver Then you have two minutes to change the configuration of your remote control as described in paragraph 11 2 2 Press OK once you have changed your remote control setting 10 3 2 Language options This screen is used to set language options according to your preferences 1 Select values for the following On Screen Language select a language for on screen display Audio Language select your audio language Subtitles select On If audio not available Hard of hearing for special subtitles for deaf or Hard of Hearing viewers or Off to disab
4. and select a channel 7 Plug the receiver s power supply cord into the mains The welcome screen appears then the First Installation screen Set your favourite Language setting 9 Set your TV display format PHILIPS in an 50 Geeignet f r PREMIERE Geeignet f r PREMIERE 10 Press OK to start scanning for channels When scanning has been successfully completed a completion message is displayed 11 Press OK a new screen appears indicating that a search for new software is in progress 12 Press EXIT to stop searching and tune the receiver to the first channel in the main TV list 13 Alternatively wait for software detection and then proceed as described in paragraph 10 5 5 2 For detailed information on first installation see chapter 5 51 Meaning of symbols Important information A Must be read and understood Your product has been designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product or his packaging it means the product is covered by European Directive 2002 96 EC x Please inform yourself about the local separate collection system for electronic products _ Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your old product will help prevent potential negative consequences for the e
5. channel and a message asks for your password Your subscription rights do not include this channel Enter your password to access the channel or remove it as a locked channel Select another channel There is no channel corresponding to this number You set a timer but did not record what you wanted The recorder was set incorrectly The recorder was not programmed Make sure that your recorder is set for the same time as your Digital Receiver Make sure you have programmed your recorder The order of the channels has changed They have been re arranged as described in paragraph 10 2 2 Refer to this chapter to change the order again You have forgotten your password From the main menu press 5 to go to the For Parents screen When prompted enter the following 4 digit code 1911 Then enter 1234 as your current password and proceed as described in paragraph 10 4 You have forgotten your KDG or Premiere PIN Code Depending on your smart card either call the KDG Call Centre on 0180 xxx xx xx for Germany 01 xxxxx xxx for Austria or call the Premiere Call Centre on 0180 551 00 00 for Germany 01 49166 200 for Austria For problems that are not related to KDG or Premiere channels or the KDG or Premiere smart card but rather due to your receiver call the Philips Call Centre on 0180 500 75 31 from Germany or 0820 400 039 from Austria Geeignet f r PREMIERE open 7 day
6. facing up Push the smartcard into the slot as far as it will go Approximately 1 cm of the card will be visible outside the slot New and updated information may be downloaded onto the smartcard from time to time The smartcard status can be checked from the Smartcard item of the Premiere menu 58 Geeignet f r PREMIERE 3 Remote control a N MUTE X Mute Demute the sound on your TV or receiver Va Standby Switch receiver to standby 4 blue resp Y white 4 N RED GREEN YELLOW BLUE Contextual keys OPT yellow Open option menu for selection in multifeed or NVOD application V p ae N List Open current channel list Then switch between channel lists SUBTITLE Subtitle selection I II Soundtrack selection L J a MENU Open Close menu CURSOR keys AV Move up down within menus and lists 4I Set a setting OK Call up current channel list while watching digital TV or listening to the radio Confirm selection VOLUME lt Turn the volume up down M 7 TVISTB Toggle between digital TV radio and analogue TV b d Geeignet f r PREMIERE Scroll one page up or one page down in EPG or channel lists 7 EPG Open close EPG INFO Open info banner Then show extended programme information Then close banner T
7. fire or shock hazard do not expose this equipment to rain or moisture The receiver should be placed on a firm surface and the ventilation openings must not be covered with items such as newspapers table clothes curtains etc Do not install this equipment near any heat sources such as radiators stoves or other apparatus that produce heat Protect it from direct sunlight When installing the receiver ensure there is a gap of approximately 2 cm around it to enable air to circulate freely and prevent overheating Leave access to the AC adaptor in case emergency shutdown is required Do not place any combustible objects on the receiver candles etc No objects filled with liquids such as vases shall be placed on the receiver It shall not be exposed to dripping or splashing Should this happen disconnect the AC adaptor from the mains and consult qualified personnel Make sure that children do not place any foreign objects in any of the openings For cleaning use a soft damp not wet cloth Never use any abrasive cloth and aerosol cleaners Your receiver as any electronic equipment consumes power In order to A reduce power consumption please switch your receiver to standby or Low Power whenever you are not using it For maximum energy saving we recommend you switch off the receiver by unplugging it from the mains if you are not using it for a long time Geeignet f r PREMIERE 53 Contents Forew
8. the way the video is transformed in case the broadcast aspect ratio is 16 9 your TV aspect ratio is 4 3 2 Press OK to confirm PHILIPS na PHILIPS Aspect TV screen format 4 3 Display ratio broadcast format 16 9 format LetterBox full picture with black bars at the top and bottom Centre Cut Out picture cut out on the left and right 10 5 2 System Settings This screen is used to set your receiver audio video output settings 1 Select values for the following TV VCR SCART Output select the SCART output format supported by your TV set and VCR refer to your TV and VCR user manual for more information Dolby Digital select Yes to enable Dolby Digital sound PHILIPS If you enable Dolby Digital sound make sure you use the digital audio output no signal on the analogue outputs Video DVD Recorder Control select the recording control feature your recorder supports refer to your recorder user manual for more information 8l Geeignet f r PREMIERE 82 PHILIPS ii TV Audio select Stereo or Mono depending the audio output format of your TV VCR Audio select Stereo or Mono depending the audio output format of your VCR Default Volume indicate the volume level to be set as default at turn on 2 Press OK to confirm 10 5 3 Time Settings This screen is used to set the local time offset with respect to actual local time retrieved from the network The offs
9. timers for the programmes you want to record using your VCR or DVD recorder reminders for the programmes you want to see in the near future To be able to record a digital channel using a VCR or DVD recorder you must programme both your recorder and receiver You must set a timer on your receiver You must also set a recording on the VCR or DVD recorder refer to the VCR or DVD recorder user manual To avoid programming both your receiver and your recorder you may also use Easy Recording provided this function is supported by your recorder Refer to paragraph 11 3 To delete an existing timer 1 Scroll to the timer you want to delete 2 Press the red colour key to delete it from the timer list 3 Press OK to confirm deletion 4 Press EXIT to exit the screen To set a new timer or edit an existing timer 1 Scroll to the timer you want to edit and press OK to select it from the timer list Alternatively press the green colour key to set a new timer 2 Then set or modify the following e Mode select TV or Radio service using the or P key Channel list select the list to which the channel you want to record belongs using the lt or P key Channel select the number of the channel on which the programme you want to record is broadcast using the or P key Date select a date using the numerical keys or the lt or P key Geeignet f r PREMIERE PHILIPS Geeignet f r PREMIERE Start time select
10. 6 9 4 Your receiver is blocked with the front panel LED lit in dimmed green or orange Your receiver is blocked because a timer is active Press the key sequence TIMER then 0 to delete the timer and recover full control of your receiver 69 70 6 10 Switching to analogue TV The TV STB key is used to switch between watching digital channels through your receiver or watching programmes through your TV set and standard analogue channels While watching digital TV or listening to digital radio Press TVISTB to switch to analogue TV VCR DVD Press TVISTB again to revert to digital TV or radio 6 11 Viewing teletext Your receiver is not equipped with a teletext decoder To consult teletext pages your TV set must be fitted with teletext decoder and be connected to the TV SCART socket of your receiver using the SCART cable supplied Refer to the user manual of your TV set to check how to access teletext pages 6 12 How do l reset my receiver in case of unstable or frozen picture 1 Press the D button on the receiver front panel for at least 5 seconds Your Preferences settings will not be lost 2 Release the button and wait for a stable front display indication i e LED either lit in orange for standby mode or green for TV mode You can then continue with normal operation Geeignet f r PREMIERE 7 Premiere features Some Premiere channels include special features On so called Options channels d
11. DCR 2021 B Benutzerhandbuch amp User manual PHILIPS Foreword Dear Customer Thank you for choosing the DCR 2020 digital receiver With your new DCR 2020 digital receiver the whole world of television is open to you for top quality viewing This User Manual will help you get the best out of the extensive and fascinating functions of your new digital receiver As a latest generation digital receiver the DCR 2020 is also designed to receive and use Premiere services With a subscription to Premiere a whole new dimension in digital television is opened up to you PREMIERE FILM offers great entertainment to suit all tastes with a selection of 100 films a day with no commercial interruption DISNEY CHANNEL provides great family entertainment PREMIERE SPORT amp PREMIERE FUSSBALL LIVE offer the best in sports and you can enjoy your game in unique broadcast quality PREMIERE THEMA includes a wide variety of theme channels for all your moods and interests with documentaries interactive advice programmes children s programmes music channels and adult channels as well as the best programmes for fans of sci fi thrillers action and classic movies On PREMIERE DIREKT you can easily book by telephone SMS or via the Internet the best current films exclusive sports events special events and adult television for whatever time you want and enjoy them at home Subscribe to the best in television and experie
12. ERE 71 8 1 Menu tree i ES E mE E li B ee ee u x ERU Channel search 72 Geeignet f r PREMIERE Geeignet f r PREM Re 8 2 Menu navigation 8 2 1 Basics While watching digital TV or listening to the radio Press MENU to display the Main Menu Press or Y to scroll up or down and select the desired menu item Press OK to display the corresponding sub items Press the or Y key to move to the desired sub item Press MENU to close the menu and return towatching TV 8 2 2 Changing settings Once you highlighted an adjustable item or sub item you can then access the values and make changes using lt or P to select an option and numerical keys to enter numerical values To open a locked menu item indicated by a A icon you will need to enter your PIN Code 8 2 3 Cancelling storing changes Either press the EXIT key to exit the screen without storing changes Or press the OK key to validate changes and exit the screen In both cases the selection moves one step back in the menu 73 9 Premiere Service Menu The Premiere Service Menu includes the following items o PIN Code Change o Smartcard o System o Scan o Display o Dolby Digital o Wake up channel PHILIPS HE 9 PIN Code Change This screen is used to modify your PIN Code To modify your PIN Code follow the instructions displayed on screen 92 Smartcard This screen is used to display information
13. IMER Set a recording timer when watching digital TV or from the EPG Note press TIMER then 0 to delete the active timer EXIT Recall last channel while watching digital TV or listening to the radio Or go back one step in the menu b d ya P P Select next previous channel Wake up the receiver from standby 4 TVIRADIO Toggle between digital TV and digital Radio Wake up the receiver from standby M N 0 9 Select a channel while watching digital TV or listening to the radio Directly select a menu item Wake up the receiver from standby uv 59 4 Connecting your Digital receiver There are several ways you can connect and integrate your Digital Receiver into your existing audio video equipment setup A Warning Before starting 1 Unplug all equipment TV set as well as VCR and or DVD from the mains Do not connect your Digital Receiver to the mains supply now 2 Check your current wiring because you might keep existing connections of your current Audio Video setup 3 Choose the relevant connection method for incorporating your Digital Receiver into your existing audio video setup 4 Connecting to a TV and VCR both fitted with SCART sockets Incorporate your receiver in your existing installation as described below to AC outlet Cable Receiver _ 9 _ eoo oo Cabl
14. W Dolby Digital audio output Application system resources Processor 200 MHz SDRAM CPU Video Graphics 32 MB Flash Data Code 4 MB EEPROM 8 kB blanking during timer if Prepare Record mode is activated Audio outputs L R output Volume controlled analogue audio Coaxial SPDIF AC3 or PCM Serial interface hidden for service only IR interface Cinch for future use Reception Demodulation Accessories Demodulation Type QAM Constellation 16 32 64 128 256 Symbol rate range MS s 3 to 69 Channel bandwidth MHz 8 RF input Frequency range MHz 47 to 862 Input level range dByV 44 to 75 in 64 QAM 51 to 75 in 256 QAM Return loss dB 2 10 Noise figure dB 9 5 RF loop through Frequency range MHz 47 to 862 De scrambling Embedded Type DVB compliant Smart card reader 1 for CA CA system Nagravision Note a subscription is required to watch Premiere and other Pay TV programmes Connections RF connections input IEC 169 2 female 75 Ohm output IEC 169 2 male 75 Ohm TV SCART Output CVBS Controlled audio L R RGB Fast blanking Slow blanking VCR SCART Input CVBS Slow blanking Audio L R RGB Fast blanking Output CVBS Audio L R Slow AC DC power adapter Remote control type RC19336005 01 Batteries 2 x 1 5V type AA RO6 User manual Worldwide Guarantee booklet SCART lead RF coaxial cable Mis
15. a start time using the numerical keys or the or key to modify the default time in steps of 1 hour End Time select an end time using the numerical keys or the or key to modify the default time in steps of 1 hour Timer Type select Recording or Reminder Frequency select Once for a single recording at the selected time and date Daily to record once every day Weekly to record once every week Monday to Friday or Monday to Saturday using the or P key 5 Press OK to confirm or EXIT to go back to the timer list screen When a recording timer is active you cannot change digital channels but you can switch to analogue TV using the TV STB key and zap through analogue channels 10 2 Channel Manager During installation a Main TV channel list and bouquet lists are built up according to your cable TV supplier s presets The Main TV or Radio list is made up of three sub sets a list you can customize according to your preferences channels 1 to 99 this list is empty after first installation a list containing all Premiere channels if available channels 100 to 199 a list containing all the channels found from channel 200 onwards The Channel Manager sub menu includes the following items o List Organization o List Editing o Channel Pool 10 2 1 List Organization This item is used to activate or de activate bouquet lists 1 Select TV or Radio channel lists using the TV RADIO key 2 Scroll to the li
16. about your smartcard 9 3 System This screen is used to display information about your receiver including the Serial Number and software version E EE 94 Scan This screen is used to view the date and results of the last scan performed It may also be used to launch a new scan Press the green colour key to scan the KDG network Alternatively press the yellow colour key to search for All channels 74 Geeignet f r PREMIERE PHILIPS PHILIPS PHILIPS uarw mune Geeignet fiir PREMIERE 9 5 Display This screen is used to set the TV output signal parameters 1 Select values for the following TV Screen Format select 4 3 or 16 9 depending on your TV screen format Display Format Letter Box Centre cut out or Auto TV SCART Output default setting is RGB Do not modify it unless your TV does not support RGB AV Control for proper operation it is recommended to keep this setting to ON 2 Press EXIT to exit the screen 9 6 Dolby Digital This screen is used to enable disable automatic selection of Dolby Digital sound When Dolby Digital is disabled you can still get stereo sound in digital format PCM 9 7 Wake up channel This screen is used to set the channel to be tuned at the receiver wake up Default setting is channel 200 75 m 76 O Setting your receiver PHILIPS Prats 10 1 Timer Manager The Timer Manager is used to set edit or delete recording
17. cellaneous Temperature range C Operating 10 to 40 Storage 25 to 70 Mains 230 V 10 50 Hz Maximum power consumption W Running mode 10 Passive standby 9 Eco mode 2 Weight Kg 0 5 Including packaging 1 2 Dimensions mm Product 240x150x45 Packaging 341 x 245 x 65 Multi language Menu English German User Manual English German This product complies with the following European Directives CC 73 23 EEC 93 68 EEC 89 336 EEC This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited Due to continued product improvements this information is subject to change without notice Dolby and the double D symbol X are trademarks of Dolby Laboratories Manufactured under license from Dolby Laboratories Geeignet f r PREMIERE 3111 176 53011 PHILIPS
18. dealer or a customer service adviser Problem Possible cause The LED on the front panel Faulty power supply does not light up Action Check that the power cord with AC adapter is correctly connected Disconnect this cord and reconnect it to ensure it is in place Check that the power is available at the wall socket No sound or picture but the Receiver in low power front panel LED is lit in red Press on the front panel No sound or picture butthe Receiver is in standby front panel LED is lit in orange Press P P or any number key of the remote control No sound or picture but the Poor signal front panel LED lit in green Check the connections at the wall socket and receiver Check signal quality using the Scan item of the Premiere menu Receiver in TV mode Press TV STB on the remote control once or twice Poor SCART connections Check the SCART connections The remote control does not operate your receiver You have changed your remote control batteries Make sure the receiver is on Make sure you are pointing the remote control at the receiver front panel Check the batteries in your remote control Check that the receiver and remote control configurations match refer to paragraph 11 2 2 Try setting your remote control again as described in paragraph 11 2 The picture appears frozen and the remote control does not operate your receiver Press
19. digital audio input socket of your audio equipment using a single CINCH cable not supplied Consult the user manual of your audio equipment to locate the proper digital audio input With this connection set up you can only control the volume up down and mute using your audio equipment remote control refer to the user manual of your audio equipment 4 3 Connecting of a video projector to watch digital TV Connect the TV SCART socket of your Digital Receiver to your video projector Video projectors are often fed with S Video format video signals If this is the case with your projector follow the instructions below for connection and installation 1 Connect a SCART S Video adapter to the TV SCART of your receiver not supplied and connect the adapter to the S Video input of your video projector by means of a S Video cable 2 Installation refer to chapter 10 5 2 to change the TV VCR SCART output setting of your Digital Receiver to S VIDEO PAL CVBS Geeignet f r PREMIERE 5 First installation PHILIP Digital er Geeignet fiir PREMIERE Your receiver is connected to the cable wall socket TV set and other equipment according to the diagrams in chapter Quick installation 1 Switch on your TV set and select a channel 2 Plug your receiver into the mains Wait for approximately 20 seconds for the welcome screen to appear 3 Wait for a few seconds for the First installation screen to appear 5 Fi
20. e up channel setting 83 84 Other settings 1 1 Restoring factory settings Press MENU then 6 and then 4 2 Press the red colour key If you restore the factory settings of your receiver you lose all the settings you stored previously and have to restart from first installation To restore your receiver factory settings refer to paragraph 10 5 4 1 2 Changing the remote control configuration If you have other items of equipment in your home and the remote control of the Philips receiver interferes with them you can change the setting of the remote control For this you must change the setting of both your receiver and remote control 11 2 1 To change the setting of your receiver Refer to paragraph 10 3 1 11 2 2 To change the configuration of your remote control 1 Simultaneously press number keys 1 and 3 and hold them for at least 3 seconds 2 Simultaneously release the two keys 3 Enter the new setting within the next 60 seconds 5 for alternative setting corresponding to setting 38 1 for the default factory setting corresponding to setting 39 4 Press OK If the batteries are removed while a key is being pressed the default factory setting 39 is restored 11 3 VCR DVD Recorder Control 11 3 1 Connecting your receiver for Video DVD Recorder Control Recorder control allows automatic recording without requiring you to programme your VCR or DVD recorder All you need to do is set a recording
21. e Wall socket Supplied TV set Terms p vermvo ON a an EXT 2 Ss ANT OUT 5 r 2 Supplied 60 Geeignet f r PREMIERE Connect the RF In socket of your Digital Receiver to the cable wall socket using the RF coaxial cable supplied Connect the TV SCART socket of your Digital Receiver to the RGB capable SCART socket of your TV using the SCART lead supplied with your Digital Receiver This connection also applies if your VCR has two SCART sockets With this connection set up you can Watch digital TV while you record analogue TV Record the digital TV channel you are watching Watch play back from your VCR 4 0 Connecting to your audio equipment analogue or digital Depending on your audio equipment you might have several options to connect your Digital Receiver Cable Receiver to AC outlet Audio equipment Analogue input Digital L R input ANALOGUE CONNECTION A Connect the L R audio output sockets to the relevant L R audio input sockets of your audio equipment using a double CINCH cable not supplied Consult the user manual of your audio equipment to locate the proper analogue audio inputs With this connection set up you can control the volume up down and mute using either your Digital Receiver or audio equipment remote control Geeignet f r PREMIERE 61 62 DIGITAL CONNECTION B Connect the Q audio output socket to the relevant
22. er later and then press OK to confirm your choice New software installation takes place as soon as you set your receiver to standby Or press the red colour key to refuse to upgrade your receiver and return to the Decoder status sub menu After successful software installation a confirmation message is displayed In case of installation failure a failure message is displayed indicating that a new installation attempt will take place as soon as you set your receiver to standby In both cases press OK to exit the upgrade process You can also launch a search for new software from the screen described above using the red colour key 10 6 Channel Search This item is used to search for new channels It is recommended not to change the predefined settings Start frequency 306 MHz Stop frequency 442 MHz Constellation Auto Band width 8000 KHz Press OK to start searching for new channels During the scanning process the following information is reported on screen the number of TV and Radio channels found the scanning progress indicated as a percentage the strength of the signal and the quality of reception If you press EXIT during the scanning process you interrupt the scanning In this case none of the channels found are stored When scanning is successfully completed a completion message is displayed as well as the number of channels detected Press OK to tune the receiver according to the Wak
23. ess K to mute the sound and press X again to de mute Change of volume is signalled using a bargraph while audio mute is signalled with an icon 67 68 6 7 Current programme options The OPT key is used to directly access the video content selection audio language and subtitles language options To change the current programme options 1 Press OPT to access the options screen 2 Scroll to the desired option using the or Y key 3 Set the desired setting using the lt or P key 4 Press OK to confirm and exit the screen By default subtitles are disabled 6 8 Electronic Programme Guide EPG While watching digital TV or listening to digital radio 1 Press the EPG key to open the EPG for the current channel The highlight is on the current programme 2 Press INFO to display extended information for the highlighted programme Press INFO again to return to normal view 3 Press or Y to move the highlight to the previous or next programme respectively Press the lt or gt key to view the previous or next day programme list respectively Press P or P to view the previous or next channel programme list respectively 4 Press OK to watch listen to the selected programme in full screen view EPG information has to be updated regularly Updates are performed automatically every time you turn your receiver to standby To allow for complete update of EPG information make sure you regularly put your receiver in s
24. et setting is updated automatically 1 Select the appropriate Time Offset with respect to GMT time 2 Press OK to confirm and exit the screen or EXIT to exit without storing the changes 10 5 4 Factory settings This item is used to reset your receiver to the factory settings 1 Press OK to reset your receiver to the factory settings 2 When prompted press the red colour key to confirm you want to reset the receiver 10 5 5 Decoder Status The Decoder Status sub menu menu includes the following items o System Information o Software Upgrade 10 5 5 1 System Information This screen is used to display information about your receiver including the Serial Number and software version You can also access this screen via the PREMIERE menu 10 5 5 2 Decoder Upgrade This item is used for software upgrades Select it to check the current software version as well as launch a search for new software After a few seconds the Software Upgrade screen indicates whether new software is available Press EXIT to exit the screen in case no new software is available Geeignet f r PREMIERE PHILIPS sew Man Sud vett signat Quant Geeignet f r PREMIERE In case software is available you are offered three options Press the green colour key to choose to upgrade your receiver immediately and then press OK to launch new software installation Or press the yellow colour key to choose to upgrade your receiv
25. ins Geeignet f r PREMIERE 6 Day to day operation 6 1 Using Low Power mode 6 1 1 Your cable receiver is on The front panel LED indicator is lit in green To put your receiver in Low Power mode press the front panel 5 button the LED indicator turns red and power consumption drops to 2 W To wake up your receiver from Low Power press the front panel 5 button the LED indicator turns green to indicate that the receiver is on 6 1 2 Your cable receiver is in standby mode The front panel LED indicator is lit in orange To put your receiver in Low power mode press the front panel 5 button the LED indicator remains orange and power consumption drop to 2 W At this stage if you press the P or P key of the remote control to wake up your receiver the command will be ignored because the receiver is in Low Power mode To wake up your receiver first press the front panel button and then press the P or P key To wake up your receiver from Low Power press the front panel D button The LED indicator remains orange to indicate standby mode Press P or P to wake up your receiver 6 2 Switching from watching digital TV to listening to digital radio To switch your receiver from TV to RADIO and RADIO to TV press the TV RADIO key Geeignet f r PREMIERE 65 66 6 3 Changing channels while watching digital TV or listening to digital radio 6 3 1 Using number keys Dial a number using the
26. le subtitles Subtitles Language select subtitles language 2 Press OK confirm 10 4 For Parents This screen is used to enable Parental Lock and change your receiver password The password is a 4 digit code used to lock channels and features of the receiver This code is different from the PIN code which is a 4 digit code used to prevent access to inappropriate Premiere programmes To enable Parental Lock Select Yes to enable Parental Lock Alternatively select No to disable Parental Lock Additionally you may modify your receiver password from this screen To modify your receiver password 1 Press the red colour key to access the Password Change feature 2 Enter your current password If you have never changed your password enter 1234 factory setting 3 Enter your new password using number keys Note that your password cannot be made up of identical digits AN 1911 must not be used as a password Geeignet f r PREMIERE 4 Enter your new password again to confirm 5 Press EXIT I0 5 Advanced settings The Settings sub menu menu includes the following items o TV Settings o System Settings o Country amp Time Settings o Factory settings o Decoder Status 10 5 1 TV Settings This screen is used to set aspect ratio settings 1 Select values for the following TV screen format default setting is 4 3 If you have a 16 9 screen TV change this setting to 16 9 for optimal viewing Display format set
27. nce more exclusiveness more variety and more comfort with Premiere When installing Premiere please observe the installation instructions that come with the Premiere smartcard If you haven t got a Premiere smartcard yet you can find further information on current Premiere offers on 0180 551 00 00 www premiere de 01 49166 200 www premiere at for Germany for Austria or at specific dealers We wish you great viewing with your Philips DCR 2020 Your Philips Team 0 12 euros min on the Deutsche Telekom Ltd fixed network Geeignet f r PREMIERE 49 Quick installation A Please read the safety section before connecting your receiver 1 Disconnect your TV set and recorder from the mains 2 Integrate your receiver in your existing installation as shown on the diagram Supplied e Cable Wall socket to AC outlet 3 Insert your smart card in your receiver with the golden contacts facing up 4 Insert the two batteries supplied in your remote control Batteries are removable from the remote using common household tools like a screwdriver The batteries supplied do not contain hazardous substances such as Mercury Cadmium or Lead x However they must not be disposed of with your household waste but to a local separate collection system 5 Reconnect your TV set and recorder to the mains Do not connect your receiver to the mains yet Switch on your TV set
28. nvironment and human health The Material recyclability symbol affixed on package cardboard and user manual EN means these parts are recyclable So do not dispose of them with your normal household waste The Material recyclability symbol affixed on plastic packaging parts means these ey parts are recyclable So do not dispose of them with your normal household waste The Green Dot affixed on cardboard means PHILIPS pays a financial duty to the Avoidance and Recovery of Packaging Waste organization 52 Geeignet f r PREMIERE Safety instructions Your receiver is powered using an AC adaptor This equipment has been A manufactured to meet the appropriate safety standards but the instructions below must be followed to operate it safely These instructions must be kept for future reference Before connecting the AC adaptor to the mains check that the mains supply voltage corresponds to the voltage printed on it If the mains voltage is different consult your dealer The AC adaptor has been designed for indoor use only The receiver and AC adaptor do not contain any user serviceable parts Do not attempt to open them All maintenance work must be carried out by qualified personnel Periodically inspect the AC adaptor for damage Do not use if damage is found Refer to qualified personnel Unplug the AC adaptor from the mains during lightning storms To prevent
29. om low power see paragraph 6 8 56 Geeignet f r PREMIERE 2 Rear panel roe ma 5 TSV er ee ner eher Socket used to connect the power cord 2 RF Out Nina RF output used to connect your receiver to a VCR TV set to watch analogue channels only or to connect another receiver 3 RF In 9 sess RF input used to connect the antenna cord from the wall socket Refer to chapter Connecting your Digital Receiver 4 TM APS area SCART socket used to connect your TV set 5 VCRIDVD Hi SCART socket used to connect your video recorder or DVD player recorder MN sese Digital audio cinch output used to connect your HiFi audio receiver system EM p Not active on this receiver system 8 LR J S esseri stadt Left Right analogue audio cinch outputs used to connect your HiFi audio receiver system The label showing the type and serial number is underneath the receiver 0 SCART is also called Euroconnector or Peritel Safety Extra Low Voltage Note if you consider using a video projector refer to its user manual for the best video format to feed it If necessary refer to paragraph System Settings to properly set the TV VCR SCART output Geeignet f r PREMIERE 57 2 Inserting your Smart Card PHILIPS To de scramble digital encrypted channels you need a smartcard from your cable TV supplier which you will be delivered when taking up a subscription Insert the smartcard with the golden chip
30. ord 49 Quick installation 50 Meaning of symbols 52 Safety instructions 53 Product description 56 l Front panel 56 1 2 Rear panel 57 2 Inserting your Smart Card 58 3 Remote control 59 4 Connecting your Digital receiver 60 4 Connecting to a TV and VCR both fitted with SCART sockets 60 4 2 Connecting to your audio equipment analogue or digital 6l 4 3 Connecting of a video projector to watch digital TV 62 5 First installation 63 5 First installation settings 63 5 2 Channel scan 63 5 3 Search failure 64 6 Day to day operation 65 6 Using Low Power mode 65 6 2 Switching from watching digital TV to listening to digital radio 65 6 3 Changing channels while watching digital TV or listening to digital radio 66 64 PIN code 66 6 5 Banner 67 6 6 Volume control 4 lt KK 67 6 7 Current programme options 68 6 8 Electronic Programme Guide EPG 68 6 9 Recording timers 69 54 Geeignet f r PREMIERE Geeignet f r PREMIERE 6 10 Switching to analogue TV 6 11 Viewing teletext 6 12 How do reset my receiver in case of unstable or frozen picture 7 Premiere features 7 Premiere Multifeed 72 PREMIERE DIREKT 8 Menu Tree 8 1 Menu tree 8 2 Menu navigation 9 Premiere Service Menu 9 PIN Code Change 9 2 Smartcard 9 3 System 9 4 Scan 9 5 Display 9 6 Dolby Digital 9 7 Wake up channel 10 Setting your receiver 10 1 Timer Manager 10 2 Channel Manager 10 3 Settings 10 4 For Parents 10 5 Advanced set
31. r password also called system password Geeignet f r PREMIERE icon description alternate audio language format rH current channel list maturity rating locked scrambled channel locked channel subtitles presence teletext presence AC 3 audio Multifeed NVOD presence S H I D Ep 6 E Geeignet f r PREMIERE The PIN code is used to access programmes to which a maturity rating is assigned Such programmes are systematically locked so as to prevent unsuitable audiences from watching them When a maturity rating is associated to the current programme a specific icon appears in the channel banner To view a locked programme enter your PIN code when prompted Keep your PIN code secret to prevent children from using it To modify your PIN code refer to paragraph PIN Code Change 6 5 Banner An information banner is used to display information about the current channel and programme Each time you change channel the banner appears at the bottom of the screen 1 To display the banner anytime while watching digital TV or listening to digital radio press INFO 2 For more info about the current programme while the banner is on press INFO a second time 3 To close the banner press INFO a third time 6 6 Volume control lt a i While watching digital TV or listening to digital radio Press lt to decrease the volume Press lt 1 to increase the volume Pr
32. remote control number keys to select the corresponding channel 6 3 2 Using P IP keys Press P to select the next channel in the current channel list Press P to select the previous channel in the current channel list Alternatively press or Y on the front panel 6 3 3 Using channel lists To select a channel from a channel list 1 Press List to display the current channel list either the Main TV list or a bouquet list previously selected 2 Press List repeatedly to switch to the list containing the channel you want to select if need be 3 Scroll to the channel you want to select using the or Y key Scroll from one page to another using the white or blue remote control key 4 Press OK to preview the selected channel on the right hand side of the screen or listen to the selected radio channel 5 Press OK again to watch in full screen view 6 4 PIN code Child protection is a high priority By entering your PIN code you can watch programmes that have been locked for child protection at any time of the day or night without neglecting the issue of child protection For a programme to be passed for universal viewing a certificate is required by law from the FSK Free Self Control on behalf of the State Child Protection Authorities For a locked programme to be broadcast a 4 digit PIN code has to be entered You receive your PIN code together with your smart card Please note that this code is different from you
33. rst installation settings 4 Set your favourite Language setting 5 Set your TV display format 6 Press OK to start scanning for channels 5 2 Channel scan During the scanning process the following information is reported on screen number of TV and radio channels detected scanning progress indicated as a percentage strength of the signal and the quality of reception Channel scan may take up to twenty minutes If you press EXIT during the scanning process you interrupt the scanning In this case none of the channels found are stored When scanning has been successfully completed a completion message is displayed 7 Press OK a new screen appears indicating that a search for new software is in progress 8 Press EXIT to stop searching and tune the receiver to the first channel in the main TV list Alternatively wait for software detection and then proceed as described in paragraph 10 5 5 2 63 64 5 3 Search failure In case of channel search failure a failure message is displayed Before starting a new scan The following checks are recommended antenna cable antenna connection to your receiver see chapter 4 1 number of channels available from your cable TV supplier 1 Press EXIT to return to the First installation screen 2 Press OK to launch a new scan If the same failure message appears after a while refer to chapter Troubleshooting Contact your cable TV supplier if the problem rema
34. s from 08 00 to 23 00 0 12 Euros min 89 90 I3 Technical specifications This product complies with the following European Directives 95 47 EC and 2002 21 EC Video decoding MPEG 2 DVB compliant up to MP ML Video bit rate up to 15 Mbit sec Video format 4 3 with options for 16 9 broadcast Pan amp Scan Letter box 16 9 Resolution up to 720x576 pixels Ease of Installation Automatic channel installation Automatic channel list update Up to 1000 channels Bouquet auto installation including Premiere network dependant Audio decoding MPEG layer I Il Dolby Digital Multi channel down mixing Ease of Use Channel list editing for personalised installation delete add move Bouquet selection Full remote control 7 days EPG network dependant Automatic recording via Timer programming in EPG Easy recording for Philips VCR and DVD R Now amp Next program monitoring Operation Features TV amp Radio modes Reception of Pay TV for Channels on KDG cable network Premiere programmes on private or KDG cable network Subtitles Parental lock with password Audio mode Mono Stereo Menu controlled installation and operation 8 event Timers Reminders Automatic VCR to TV SCART bypass for audio L R CVBS or RGB video signals Software upgrade via Cable network Serial interface Eco mode consumption 2
35. st you want to activate or de activate using the V keys 3 Press the red colour key to activate or de activate the list 4 Press EXIT to confirm and exit 77 I0 2 2 List Editing This item is used to customize the editable part of the PHILIPS cocci rex imn Main TV list channels 1 to 99 1 Set criteria for the channels you want to Add or Remove Reorder Mode TV or Radio depending on the type of channels you want Channel List Main TV which is the only editable list Set the Modification feature you want to use Add Channels or Remove Reorder Channels n case you selected Add Channels you must also define the channel pool from which you want to add channels by setting values for the following o Channel Pool channel properties you want to use as filtering criteria o Sort list ordering method 2 Press OK to access the next screen It may take a few seconds for this screen to appear To add channels to the editable part of the Main TV list Add Channels 1 Scroll to the channel you want to add using the A Y keys 2 Press OK to add the channel to the list 3 Repeat this operation as needed 4 Press EXIT to exit the screen To remove channels from the editable part of the Main TY list Remove Reorder Channels 1 Press the red colour key to remove all channels from the list 2 Alternatively scroll to the channel you want to remove using the V keys 3 Press OK to remove the channel Deletion is immedia
36. tandby for instance every night when you stop watching digital TV or listening to digital radio If your EPG information is not completely updated some pieces of information may not be available for instance you might get incomplete results when performing a search Please also note that EPG information will have to be fully reloaded in case of power failure or network or content modification Geeignet f r PREMIERE Geeignet f r PREMIERE 6 9 Recording timers Recording timers are used to perform VCR or DVD recordings 6 9 1 Set a timer from the EPG 6 9 1 1 Setting a timer on the programme you are watching 1 Press EPG 2 Press TIMER 6 9 1 2 Setting a timer on a future programme 1 Press EPG 2 Move to the programme you want to record 3 Press TIMER 4 Proceed as indicated in paragraph 10 1 6 9 2 Setting a timer via the Timer Manager Refer to paragraph 10 1 6 9 3 Deleting an active timer A timer is active Recording is signalled by the front LED lit in dimmed green in TV or Radio mode or dimmed orange if your receiver is in standby To delete the active timer 1 If your receiver is in standby press P P or any number key of the remote control 2 Press the key sequence TIMER then 0 The LED is no longer dimmed and you can change channels When a recording timer is active you cannot change digital channels but you can switch to analogue TV using the TV STB key and zap through analogue channels
37. te To reorder channels in the editable part of the Main TV list Remove Reorder Channels 1 Scroll to the channel you want to move using the A Y keys 2 Press the yellow colour key to enable reordering as indicated by the presence of the double arrow 3 Move the channel to the desired position using the A Y keys Press OK to confirm 5 Repeat this operation as needed A Geeignet f r PREMIERE I0 2 3 Channel Pool This item is used to lock or unlock channels When zapping through the channel lists locked channels will be signalled using a lock icon and protected by PIN Code The PIN code is a 4 digit code used to prevent access to inappropriate Premiere programmes parental control PHILIPS srei rans To set the channel pool 1 Select values for the following Mode TV or Radio depending on the type of channels you want to manage Channel Pool channel properties to be used as filtering criteria Sort list ordering method 2 Press OK to access the next screen It may take a few seconds for this screen to appear To lock or unlock a particular channel 1 Scroll to the channel you want to lock or unlock Press the yellow colour key to lock it A A mark appears indicating that the channel is locked 3 Alternatively press the yellow colour key to unlock a locked channel 4 Repeat this operation as needed 5 Press EXIT to exit the screen 10 3 Settings Settings is used to set o Display options o
38. timer for your VCR or DVD recorder to start stop recording Geeignet f r PREMIERE Prior to setting this feature 1 Consult the user manual of your VCR or DVD recorder to check if and how recorder control is supported Most Philips VCR and DVD recorders support one of the two recorder control options i e Prepare Record and Record Link 2 Check that your TV and VCR or DVD are both fitted with two SCART sockets 3 Incorporate your receiver in your existing installation as described below to AC outlet Supplied Cable Wall socket TV set ls VCR DVD PHILIPS ANTIN ANT OUT m EXT2 EXT e 3 Supplied Connect the cable from the cable wall socket to the RF In socket of your Digital Receiver Connect the TV SCART socket of your Digital Receiver to the EXT1 SCART socket of your TV using the SCART lead supplied with your Digital Receiver Connect the VCR DVD SCART socket of your Digital Receiver to the EXT2 SCART socket of your VCR called IN or DECODER using a SCART lead Connect the EXT1 SCART socket of your VCR called OUT to the EXT2 SCART socket of your TV using a SCART lead 4 Plug all your equipment excluding your Digital Receiver into the mains Read section Quick installation to proceed with the channel scan if not already done With this connection set up You can watch digital TV while you record analogue TV
39. tings 10 6 Channel Search Il Other settings I1 I Restoring factory settings 11 2 Changing the remote control configuration 11 3 VCR DVD Recorder Control I2 Troubleshooting 13 Technical specifications 70 70 70 71 71 71 72 72 73 74 74 74 74 74 75 75 75 76 76 77 79 80 8l 83 84 84 84 84 88 90 55 Product description l Front panel DER RUN DIGITAL ABEL RECEIVER z PHILIPS d 1 Smart Card slot see chapter Inserting your Smartcard DW nee channel Je uc channel d LI uM ee ee AE remote control receiver window S Do didtnr peque necu ee n ON Low Power Reset 5 second key press The front panel button includes a colour LED indicating the receiver status The LED blinks at remote control command reception STATUS INDICATOR TABLE ga MUN Indicator LED Mode en Low power red Standby orange TV Radio mode green Timer active in running mode Dimmed green Timer active in standby Dimmed orange Download in progress Blinking red If you have put your receiver in standby and the LED is blinking red it indicates that an upgrade of your receiver is taking place Do not interrupt this operation Wait for the LED to blink green indicating successful download You can then continue as normal When your receiver is in low power mode software functions are no longer supported Therefore EPG data may not be up to date when waking up fr
40. uring sports broadcasts you can choose between different matches e g Bundesliga football change audio soundtracks e g stadium commentary or choose between different camera EN angles Formula 1 Using the Options channels on the PREMIERE DIREKT portal channels you can also choose the start time of your choice for the movie you re ordering 7 Premiere Multifeed When multifeed options are available for the current programme the Wm icon is displayed in the channel banner To select a multifeed option 1 Press the yellow OPT key of the remote control to open the Options screen 2 Scroll to the option you want to set using the A or Y key 3 Select the sports programme using the lt or P key 4 Press OK to confirm and exit the Options screen 7 2 PREMIERE DIREKT PREMIERE DIREKT presents various programmes at various times that you can order individually All the information about the programmes on offer prices and the process of ordering is available from the PREMIERE DIREKT portal Here is how you can watch the programmes you ordered on PREMIERE DIREKT 1 Press the yellow OPT key on the remote control to open the Options screen 2 Use the A or V key to place the cursor on the picture selection 3 Use the lt or key to select the movie at the Sinn ju mi TWWDSPATE We ass e ume start time you want e g D2 9 30pm o 4 Press OK to confirm and close the Options window Geeignet f r PREMI
Download Pdf Manuals
Related Search