Home
        C A T A L O G - Sycard Technology
         Contents
1.    Table of contents    16 bit PC Card Development Tools  Extender Cards Socket Savers  16 bit PC Card Prototype Boards  16 bit PC Card Test Tools  Manufacturing PC Card Socket Testers  Engineering PC Card Socket Testers  CardBus Development Tools  CardBus Extenders Socket Savers  CardBus Test Tools  CardBus Socket Testers  Engineering Test Tools  CompactFlash    Development Products  CompactFlash    Extender Cards  CompactFlash    Test Tools  PCI Products  Extender Cards  Secure Digital Products  SmartMedia    Products  Software Products    Sycard Technology  Product Catalog    i  o oO     U N N NAA    wo    Sycard Technology 1180 F Miraloma Way Sunnyvale  CA 94085 408 749 0130 tel 408 749 1323 fax    http   www sycard com    Sycard Technology Product Catalog 16 bit PC Card Test Tools    16 bit PC Card Test Tools    ry SYCARD    PUCTeSt       PCCtest Card    The following Sycard test  card models are for  manufacturing purposes     m PCCtest 170  m PCCtest 250 350  m PCCtest 270 273    Manufacturing PC Card Socket Testers    PCCtest 170  Low Cost 16 bit PC Card Socket Tester  3 3  amp  5 volt     The PCCtest 170 is part of a new family of low cost 16 bit PC Card socket testers  Based on the  highly successful PCCtest 2xx series of socket testers  the PCCtest 170 is a cost reduced version  designed to provide similar test coverage at a significant price reduction  The new socket tester  provides a quick and easy way of verifying the operation of a host socket  Housed in a Typ
2.    card 4   that can   t use a standard extender card  Sycard provides the CF extend       ee  180CIB  Card Interface Board  which allows full access to all 50 signal Si anniina ra     and power pins on the CompactFlash    peripheral  Standard 0 1    head   i 7      ers allow the user to connect standard 26 pin ribbon cables to test or Ta merna     prototype hardware  The CF extend 180CIB is ideal for connecting test Ts E  or development hardware to a CompactFlash    card and is designed    to provide a low noise interface to prototype or test hardware  The CF  extend 180CIB is a 4 layer PC board with power and ground planes   Four 26 pin headers with alternating grounds insure signal integrity   The CF extend 180CIB is available as a standalone product or packaged as a flexible extender with  the CF extend 180HIB           CF extend 182 182E    Low Profile CompactFlash Flexible Extender   The CF extend 182 is a low profile flexible extender card  designed to physically extend the CompactFlash    socket for  easy access  Similar to Sycard   s CF extend 180  the model  182 reduces the overall dimensions of the extender by using  a single piece flexible circuit board  The lower profile allows  for uses in many applications where the CF extend 180 was  too bulky  The CF extend 182 extends the CompactFlash  socket 5       The CF extend 182 can also be used as a    Type extender     which allows the user to insert a Type II CF  card  5mm  thick  into a Type I  3 3mm  or Type II  5
3.  0mm slot  By  using the CF extend 182  Type II peripherals  such as the IBM Microdrive    hard disk drives or  RF radio devices  can be inserted into computers that only support Type I cards  Before attempting  to use the CF extend 182 in such an application  the user should verify if the power consumption  of the Type II CF  Card is compatible with the host system    The CF extend 182 is available in two configurations  The standard CF extend 182 comes without  a card ejector  This configuration is designed for applications that don   t require frequent card  changes  The CF extend 182E provides an integral ejector mechanism and is designed for applica        tions that require frequent card insertion removal or physical card protection     Sycard Technology Product Catalog CompactFlash    Development Tools    CompactFlash     Test Tools  CF test 220    CompactFlash    Socket Tester  The CF test 220 socket tester provides a quick and easy way of verifying the  operation of a CompactFlash    host socket  Housed in a standard 3 3mm  CompactFlash    card  the CF test is fully self contained  The CF test socket  tester verifies all signals on the CompactFlash    interface including accurate  Vcc measurements    Manufacturers  service centers and developers of CF products can ben        efit from the quick verification of their CF hosts  How many times have you  wondered if the problem you were having was hardware  software or both   A short test by the CF test 220 can save hour
4.  12V  VIO and VAUX    All PCI signal and power pins are accessible via standard  0 1  test posts  Multi layer design with separate ground and  power planes assure trouble free operation  All signal pins  are clearly marked for quick and easy logic analyzer or scope hookup  SMT pads on each signal       allow the user to isolate any signal for testing or debug   The PClextend 174 is keyed to be inserted in both 3 3V and 5V slots  All of our PClextend    products are constructed of high quality components for long service life        PClextend 176 177  32 64 bit PCI Extender Cards    The PClextend 176 and 177 extender cards are a debug  tool for 64 bit PCI designs  Designed as both an extender  and debug tool  the PClextend 176 and 177 supports both  manufacturing and engineering needs  As an extender  card the PClextend extends a PCI card 2 5  above the host  computer  Jumpers blocks on all power supplies allow for  current consumption or voltage margin testing  Multiple  power status LEDs indicate 3 3V  5V   12V   12V  VIO  and VAUX    All PCI signal and power pins are accessible via standard 0 1  test posts  Multi layer design with  separate ground and power planes assure trouble free operation  All signal pins are clearly marked  for quick and easy logic analyzer or scope hookup  SMT pads on each signal allow the user to iso   late any signal for testing or debug    Both the PClextend 176 and 177 are keyed to be inserted in both 3 3V and 5V slots  The  PClextend 176 accepts
5.  5V 64 bit PCI cards and the PClextend 177 accepts 3 3V 64 bit PCI cards     All of our PClextend products are constructed of high quality components for long service life        21    Sycard Technology Product Catalog Software Products    Software Products    PC Debug   Debugger for 16 bit PC Cards   PC Debug is a software program that allows the user to troubleshoot and debug 16 bit PCMCIA  PC Cards and Host Systems  It can be viewed as a    superset    of the DOS DEBUG program for  PC Cards  It provides the basic debug commands  display set memory and I O ports  as well as  commands that directly support the industry standard Intel PCIC  82365 SL  and compatible  host controllers     Features    DOS based program with minimum test system requirements   A super set of the DOS debug program supporting over 75 commands for configuring  control   ling  and testing PC Cards and Host Systems    Keyboard  mouse  and menu driven commands available in    window style    user interface  Context sensitive help available   Supports the industry standard 82365 SL and compatible PCIC Host controller   Specialized commands to support PC Card special needs  Attribute Memory  CIS and n  FCRs   Common Memory  and I O addressing spaces   Commands to display and set the PC Card   s Function Configuration Registers  FCR    Special commands to support PC Card Custom Interfaces  i e  Zoomed Video    Registers as Card Services Client to provide additional PC Card configuration information  Works 
6.  CardBus  environment  Dual LEDs indicate if the socket is running at 3 3V or 5V   The PCCextend 135 extender card is a solid unit designed for years of  reliable service        Sycard Technology Product Catalog CompactFlash    Development Tools    CompactFlash      Development Products    CompactFlash     Extender Cards  CF extend 160B    CompactFlash    Extender Cards    The CF extend model 160B is the ultimate CompactFlash    extender  card  It provides CompactFlash    host and card developers a convenient  way of accessing signals on the interface    All 50 pins are accessible via standard 0 1    test posts  Multi layer  design with separate ground and power planes assure trouble free opera   tion  All signal pins are clearly marked with both I O and memory  mode designations  Jumper blocks on Vcc allow for easy current mea   surements  Dual LEDs indicate if the socket is running at 3 3V or 5V    The CF extend 160B is the only extender card to offer the CFswap  switch  A quick push on this switch simulates a card removal insertion  cycle saving wear and tear on the card socket  and your fingers   The CF  Extend model 160B is solidly designed for years of reliable service    The CF extend 160B supports both Type I  3 3 mm thick  and Type  II  5 0 mm thick  CompactFlash    cards    Note  The CF extend 160B replaces discontinued CF extend 160A        CF extend 162  amp  CF extend 162E  CompactFlash    Socket Saver and Extender Cards    In a high volume production environment
7.  PCChost 1420 replaces previous  model PCChost 1225           CardBus Extenders Socket Savers  PCCextend 70    With top mounted connector    The PCCextend 70 socket saver extender is optimized for the full 33MHz speed of the CardBus  interface  Its six layer controlled impedance construction provides excellent signal integrity     PCCextend 75    With bottom mounted connector   The PCCextend 75 socket saver extender is similar to the PCCextend 70   but has it   s connector mounted on the bottom  When used in conjuction  with the PCCextend 70  it allows both slots of a notebook computer to be  extended at the same time     The PCCextend 70 75 units can also be used as a    Type Extender    which  allows the user to insert a Type III PC Card  10 5mm thick  into a Type  I  3 3mm  or Type II  5 0mm  slot  By using the PCCextend 70 75  Type  III peripherals  such as hard disk drives or RF radio devices  can be insert        into computers that only support Type I or Type II cards  Before attempting to  use the PCCextend 70 75 in such an application  the user should verify if  the power consumption of the Type III PC Card is compatible with the host system        Sycard Technology Product Catalog CardBus Development Tools    PCCextend 125  CardBus Flexible Extender Card  The PCCextend 125 is a flexible extender card designed to provide easy   3    access to a CardBus PC Card for debug or test  Designed with the same  low noise characteristics of our PCCextend 140  the PCCextend 125
8.  The RS   232 serial interface can connect to the host machine or a dumb terminal     Sycard Technology Product Catalog 16 bit PC Card Test Tools    The PCCtest 350 is designed to test products based on the original PCMCIA 2 1 release  The tes   ter verifies all data  address and strobe signals at 5 0 volts  The PCCtest 350 is best suited for the  following PC Card controllers     Cirrus Logic CL PD6710   Cirrus Logic CL PD6720   Intel 82365SL   Vadem VG 365   Vadem VG 465   Vadem VG 468     VLSI 82C146   And any other 5V only 16 bit PC Card implementation    PCCtest 370 373  16 bit PC Card Socket Testers with 3 3 Volt and DMA Support    The PCCtest 370 and 373 socket testers provides a quick and easy way of verifying the operation of  a host socket  Housed in a Type II PC Card  the PCCtest includes software to test a wide variety of  socket controllers from TI  Cirrus Logic  Vadem  Ricoh  Omega Micro and VLSI Technology  The  PCCtest socket tester verifies all signals on the 16 bit PC Card interface including accurate Vcc and  Vpp measurements    Manufacturers  service centers and developers of PC Card products can benefit from the quick  verification of their 16 bit PC Card hosts  How many times have you wondered if the problem  you were having was hardware  software or both  A 15 second test by the PCCtest can save hours  of debug work by validating the hardware portion of the 16 bit PC Card interface  Some of our  PCCtest customers were able to find design errors in produ
9.  a CF test 220 socket tester may  see several thousand insertion removal cycles a month  To prevent wear  and tear on the CF test 220   s 50 pin connector  Sycard supplies a low cost  socket saver  the CFextend 162  The CF extend 162 is inserted between the  CompactFlash    socket and the CF test 220 unit    The CF extend 162 can also be used as a    Type extender    which allows the  user to insert a Type II CF  card  5mm thick  into a Type I  3 3mm  or Type  II  5 0mm slot  By using the CF extend 162  Type II peripherals  such as the  IBM Microdrive    hard disk drives or RF radio devices  can be inserted into  computers that only support Type I cards  Before attempting to use the CF  extend 162 in such an application  the user should verify if the power con   sumption of the Type II CF  Card is compatible with the host system    The CF extend 162 is available in two configurations  The standard CF  extend 162 comes without a card ejector  This configuration is designed for  applications that don   t require frequent       card changes    The CF extend 162E provides an integral ejector mechanism and is  designed for applications that require frequent card insertion removal or  physical card protection           Cf extend 162E    Sycard Technology Product Catalog CompactFlash    Development Tools    CF extend 165  CompactFlash     to PC Card Adapter Extender Card    The CF extend 165 is a unique development tool for CompactFlash     designs  It allows a standard 68 pin PC Ca
10.  between  16 bit PC Card mode and CardBus mode  Instead of separate 16 bit PC Card  and CardBus configuration headers  the PCCtest 457   s slide switch can put  the PCCtest 460 into either mode    PCCtest 455 External Control Unit   The PCCtest 455 external control unit in conjunction with the PCCtest  460  is designed to automate testing of the PC Card slot  The PCCtest 455  controls the configuration of the PCCtest 460 Card Detects and Voltage  Sense pins  Through program control  the PCCtest 455 can configure   the PC Card interface for CardBus  3 3V 16 bit  5V 16 bit and others    The PCCtest 455 connects between the host PC   s parallel port and the  PCCtest 460   s 15 pin I O interface  Software support for the PCCtest 455  is included in the PCCtest 460 software    The PCCtest 460 can be ordered as follows           Order Number Description   PCCtest 460 CardBus socket tester with 16 bit PC Card configuration header and  CardBus configuration header   PCCtest 460 01 CardBus socket tester with PCCtest 457 switchable configuration header   PCCtest 455 External Control Unit   PCCtest 457 Switchable configuration header    Sycard Technology Product Catalog CardBus Test Tools    Engineering Test Tools    PCCtest 560    CardBus Socket Tester Debugger   The PCCtest 560 extends the functionality of the PCCtest 450 460 by adding a serial debug port   The serial debug port allows the user to monitor the CardBus or 16 bit interface  In CardBus mode  the PCCtest 560 is capable of 
11.  ribbon cables connect the host interface board to the card interface  board  The PC Card to be tested is inserted into the card interface board   s 68   pin connector    The PCCextend 120 was designed with the engineer and technician in Lee  mind  Thoughtfully placed grounding posts provided a convenient place to E  ground a scope probe or analyzer  Vcc test points are available for easy voltage mea        Sycard Technology Product Catalog 16 bit PC Card Development Tools    surements  Dual LEDs indicate if the Vcc is at 3 3V or 5V  A resettable current protection device  protects the host from Vcc to ground shorts  Jumpers can isolate Vcc and Vpp supplies for easy  current measurements    All too often extender cards are the source of many signal integrity problems  The PCCextend  120 is designed to minimize the signal degradation by using proven design techniques  Separate  Vcc and Ground planes provide a low inductance path to the host socket  High frequency X7R  and bulk tantalum capacitors keep supply rails clean  The PCCextend 120 uses four 34 pin ribbon  cables to connect the host and card interface boards  This insures that each signal has a ground  return    The PCCextend 120 comes standard with a 5    extension cable  Although distances greater than a  few inches may effect the signal integrity  we have used longer cable lengths successfully in  several applications    Sycard Technology offers the PCCextend 120 in several configurations  For those that need a  read
12.  takes  this design a step further by connecting the host and card via ribbon  cables  The flexible extender consists of two PC boards   the host interface  board and the card interface board  The host interface board is inserted  into the host   s CardBus slot  Four 34 pin ribbon cables connect the host  interface board to the card interface board  The PC Card to be tested is    inserted into the card interface board   s 68 pin connector       The PCCextend 125 was designed with the engineer and technician in    mind  Thoughtfully placed grounding posts provided a convenient place      to ground a scope probe or analyzer  Vcc test points are available for easy   voltage measurements  Dual LEDs indicate if the Vcc is at 3 3V or 5V  A   resettable current protection device protects the host from Vcc to ground shorts  Jumpers can iso   late Vcc and Vpp supplies for easy current measurements    All too often extender cards are the source of many signal integrity problems  The PCCextend  125 is designed to minimize the signal degradation by using proven design techniques  Separate  Vcc and Ground planes provide a low inductance path to the host socket  High frequency X7R  and bulk tantalum capacitors keep supply rails clean  The PCCextend 125 uses four 34 pin ribbon  cables to connect the host and card interface boards  This insures that each signal has  a ground return    The PCCextend 125 comes standard with a 5    extension cable  Although distances greater than  a few inches 
13. Manufacturers  service centers and developers of PC Card products can benefit from the quick  verification of their 16 bit PC Card hosts  How many times have you wondered if the problem  you were having was hardware  software or both  A 15 second test by the PCCtest can save hours  of debug work by validating the hardware portion of the 16 bit PC Card interface  Some of our  PCCtest customers were able to find design errors in products they already had in production    The PCCtest 270 273 supports testing of Direct Memory Access  DMA   3 3V and Voltage  Sense pins  VS1 and VS2  as defined in the PC Card    95 Standard  The PCCtest 270 273 verifies  all data  address and strobe signals at 3 3 or 5 0 volts    The PCCtest 273 is a special version of the PCCtest 270 that internally grounds CD1  and  CD2  for socket controllers that require active card detects prior to slot power up  All CardBus con   trollers require that card detects be grounded prior to slot power up     The PCCtest 270 is best suited for the following 16 bit PC Card controllers       Cirrus Logic CL PD6722   Omega Trident 82C722  a Cirrus Logic CL PD6729   Omega Trident 82C094    Cirrus Logic CL PD6730   Ricoh RL5C266 366     Intel 82365SL DF   Ricoh RL5C296 396     Intel 82092AA  PPEC  a VLSI 82C146A    The PCCtest 273 is best suited for the following 16 bit PC Card controllers   a Cirrus Logic CL PD6832  16 bit only    Vadem VG 469   All Texas Instrument 16 bit PC Card Controllers   All O2 Micro 16 bit PC Ca
14. PCCextend 120 5    cable set    16 bit PC Card Prototype Boards    PCCproto 150    16 bit PC Card General Purpose Prototype Board  For designers requiring a general purpose prototype board  Sycard  offers the PCCproto 150  The PCCproto 150 is a flexible proto   type board designed specifically for 16 bit PC Card designs    Since most PC Card designs are based on low profile  high  pin count packages  the PCCproto 150 provides special proto        type areas for these devices  These areas accept plug in    daughter  boards    that support a particular package type  The product  includes three of these boards supporting 64  100  144 and 176     pin TQFP and 44  100 and 160 pin PQFP packages  Additional A            daughter boards    may be purchased separately  An area reserved       for I O provides connector locations for straight 0 1    headers and  surface mount connectors  The PCCproto 150 is constructed using a multi layer design with clearly  marked signal names and pin numbers     PCCproto 200   Multifunction 16 bit PC Card Prototype Board   In conjunction with National Semiconductor  Sycard Technology  offers the PCCproto 200 16 bit PC Card multifunction prototype  board  The PCCproto 200 provides a flexible prototype environ   ment for developing 16 bit single or multiple function PC Cards   Based on the National Semiconductor PCM16C02 multiple func   tion PC Card interface chip  the PCCproto 200 includes data  sheets and application notes  The PCCproto 200 consists 
15. The CFextend 166 167  can be used for a wide variety of applications including      Wireless cards     ATA Flash PC Cards   a Data acquisition cards     Communications Cards       Available in two models  the CFextend 166 is for 3 3V keyed 16 bit PC  Cards and the CFextend 167 is for 5V keyed PC Cards  The CF extend is a  strictly a passive interface from the PC Card to the CompactFlash    host   No voltage conversion regulation or signal level conversion is provided   Before purchasing the CFextend 166 167  the user should verify that the PC Card is compatible  with the intended CompactFlash    host  There are several issues that will determine if the 16 bit  PC Card can work with the CFextend 166 167     Power Consumption Most CompactFlash    hosts can only supply 100mA of current  Some PC   Cards may draw as much as 700 1000mA     Operating Voltage CompactFlash    hosts can provide 3 3V  5V or both  The user should con    firm if the PC Card operating voltage is compatible with the CompactFlash    host     Driver support Most CompactFlash    sockets are controlled by Microsoft   s WinCE operating  system  The user must verify if this driver support is provided by the PC Card vendor      Address lines The CompactFlash    interfaces supplies 11 address lines while the PC Card  interface supplies 26  In many cases the PC Card   s upper order address lines are not used  The  user must verify that a PC Card does not require more than the 11 address lines supplied on the  Compac
16. ard slot  to support 32 bit CardBus  16 bit PC Card  Zoomed Video  5V and 3 3V  cards  Testing this slot involves inserting as many as 3 4 cards to verify full  functionality  The PCCtest 460 is the only test card designed to emulate  all types of cards in a single unit    Housed in a type II card  the PCCtest 460 can test the 32 bit CardBus   16 bit PC Card and the Zoomed Video interfaces  In CardBus mode  the  PCCtest 460 is capable of responding to target memory  I O and con        figuration cycles  Master mode I O and memory cycles can be generated  under program control  Control  Address and Data signals can be latched  to verify correct access  In 16 bit mode  the PCCtest 460 can verify all address  data  control and  status signals  16 bit testing is supported at 3 3V and 5V  From 16 bit mode  the PCCtest can be  configured for Zoomed Video ZV  operation  In ZV mode  the PCCtest will generate a ZV data  pattern designed to verify the ZV bus  An audio test pattern is generated simultaneously to verify  the ZV audio signals    Selection of CardBus or 16 bit interface is accomplished through an external configuration  header  This header plugs into the PCCtest   s 15 pin I O connector  An optional external configu   ration unit  the PCCtest 455  provides for program control of 16 bit  Zoomed Video or  CardBus interface     PCCtest 460 Optional Accessories    PCCtest 457 Switchable Configuration Header   The PCCtest 457 switchable configuration header simplifies switching
17. cts they already had in production    The PCCtest 370 373 supports testing of Direct Memory Access  DMA   3 3V and Voltage  Sense pins  VS1 and VS2  as defined in the PC Card    95 Standard  The PCCtest 370 373 verifies  all data  address and strobe signals at 3 3 or 5 0 volts    The PCCtest 370 and 373 extends the capabilities of the PCCtest 270 273 series by adding a  serial interface for    backdoor    debugging of the PC Card interface  If the socket appears completely     dead     the user can debug by accessing the PCCtest   s internal registers  Data  address and strobe  signals may be monitored or asserted  The 37x series is perfect for bringing up a PC Card host  design  The RS 232 serial interface can connect to the host machine or a dumb terminal    The PCCtest 373 is a special version of the PCCtest 370 that internally grounds CD1  and  CD2  for socket controllers that require active card detects prior to slot power up  All CardBus con   trollers require that card detects be grounded prior to slot power up    The PCCtest 370 is best suited for the following PC Card controllers       Cirrus Logic CL PD6722   Omega Trident 82C722    Cirrus Logic CL PD6729   Omega Trident 82C094    Cirrus Logic CL PD6730 a Ricoh RL5C266 366     Intel 82365SL DF a Ricoh RL5C296 396     Intel 82092AA  PPEC   a VLSI 82C146A    The PCCtest 373 is best suited for the following PC Card controllers   a Cirrus Logic CL PD6832  16 bit only      Vadem VG 469   All Texas Instrument PC Card 16 C
18. data rates and controlled impedance requirements of the CardBus  interface  Fabricated on a six layer board  the PCCextend 140 is designed  to minimize signal degradation in the 33MHz CardBus environment   The PCCextend 140 is compatible with all release 2 1 and both 16 bit PC  Card and CardBus capable PC Card 95 sockets  The host side connector  is keyed to be compatible with all PC Card slots  On the card side  the  CardBus compliant connector supports both 3 3V and 5V keyed cards     PCCextend 145   HP Logic Analyzer Adapter for the PCCextend 140   For users of Hewlett Packard Logic Analyzers  Sycard provides an   adapter designed to provide quick hookup to the PCCextend 140  CardBus extender  The PCCextend 145 is designed to interface to HP   s  Termination adapters  HP P N 01650 63203   CardBus signals are routed    to the appropriate logic analyzer channels for state or timing analysis        Simple plug in design allows for easy attachment and removal        Sycard Technology Product Catalog CardBus Development Tools    PCCextend 135    Externally Powered CardBus Extender Card   The PCCextend 135 allows a CardBus card under test to be powered  from an external power supply  MOSFET switches automatically switch  the external power to the CardBus card under test when the socket  power is applied  The PCCextend 135 provides separate switches for  VCC  VPP1 and VPP2  Fabricated on a six layer board  the PCCextend  135 is designed to minimize signal degradation in the 33MHz
19. des developers  of 16 bit PC Card hosts and cards a convenient way of accessing signals on the  16 bit PC Card interface  All 68 pins are accessible via standard 0 1    test posts   Multi layer design with separate ground and power planes assure trouble free  operation  All signal pins are clearly marked with both I O and memory mode  designations  Jumper blocks on Vcc and programming power pins allow for  easy current measurements  A current protection device protects the host sock   et  The PCCextend 100 is compatible with all 16 bit PC Card sockets including  type I  H II and larger  Dual LEDs indicate if the socket is running at  3 3V or 5V    The PCCextend 100 extender card is a solid unit designed for years of reli   able service and is the only extender to offer the PCCswap switch  A quick push  on this switch simulates a card removal insertion cycle saving wear and tear on the 16 bit PC Card       socket  and your fingers         PCCextend 120  16 bit PC Card Flexible Extender Card    The PCCextend 120 is a flexible extender card designed to provide easy access  to a 16 bit PC Card for debug or test  Designed with the same low noise char   acteristics of our PCCextend 100  the PCCextend 120 takes this design a step  further by connecting the host and card via ribbon cables  The flexible extend   er consists of two PC boards  the host interface board  and the card interface  board  The host interface board is inserted into the host   s 16 bit PC Card slot   Four 34 pin
20. e II   PC Card  the PCCtest includes software to test a wide variety of socket controllers from Texas  Instruments  Cirrus Logic  Vadem  Ricoh and O2 Micro  The PCCtest socket tester verifies all sig   nals on the 16 bit PC Card interface including accurate Vcc and Vpp measurements    Manufacturers  service centers and developers of PC Card products can benefit from the quick  verification of their PC Card hosts  How many times have you wondered if the problem you were  having was hardware  software or both  A 15 second test by the PCCtest can save hours of debug  work by validating the hardware portion of the 16 bit PC Card interface    Sycard Technology offers the PCCtest 170 with a    canned    application software designed to  test common socket controllers under MSDOS  For developers of embedded systems or those who  wish to develop their own software  Sycard offers a developer   s kit with sample source code and  technical documentation     PCCtest 250  16 bit PC Card Socket Tester for 5 0 Volt Systems    The PCCtest 250 socket tester provides a quick and easy way of verifying the operation of a host  socket  Housed in a Type II PC Card  the PCCtest includes software to test a wide variety of socket  controllers from Intel  Cirrus Logic  Vadem  Ricoh  Omega Micro and VLSI Technology  The  PCCtest socket tester verifies all signals on the 16 bit PC Card interface including accurate Vcc and  Vpp measurements    Manufacturers  service centers and developers of PC Card prod
21. ent needs    The CF extend 180 can be ordered as follows     Order Number Description   CF extend 180 CompactFlash    flexible extender card with 5   cable extension  includes on  host interface board  180HIB  and one card interface board  180CIB     180HIB CF extend 180 host interface board   180CIB CF extend 180 card interface board   180XCBL 5 CF extend 180 5    cable set       Sycard Technology Product Catalog CompactFlash    Development Tools    CF extend 180HIB  CompactFlash    Host Interface Board    For those applications that require access to the CompactFlash    inter   face that can   t use a standard extender card  Sycard provides the CF  extend 180 HIB  Host Interface Board   The CF extend 180HIB allows  full access to all 50 signal and power pins on the CompactFlash     host  Standard 0 1    headers allow the user to connect standard 26 pin  ribbon cables to test or prototype hardware  The CF extend 180HIB   is ideal for interfacing a prototype CompactFlash    card design to the  CF host socket  The CF extend 180HIB is designed to provide a low  noise interface to prototype or test hardware and is a 4 layer PC board  with ground and power planes  Four 26 pin headers with alternating  grounds insure signal integrity  The CFextend 180HIB is available as   a standalone product or packaged as a flexible extender with the CF  extend 180CIB        CF extend 180CIB    CompactFlash    Card Interface Board 7   For those applications that require access to a CompactFlash 
22. face board and one card interface board           120HIB PCCextend 120 host interface board    120CIB PCCextend 120 card interface board    12XCBL 5 PCCextend 120 5    cable set       PCCextend 120CIB  16 bit PC Card Card Interface Board    For those applications that require access to the 16 bit PC Card that  can   t use a standard extender card  Sycard provides the PCCextend  120CIB  Card Interface Board  which allows full access to all 68   signal and power pins on the PC Card peripheral  Standard 0 1     headers allow the user to connect standard 34 pin ribbon cable to  test or prototype hardware  The PCCextend 120CIB is ideal for  connecting test or development hardware to a 16 bit PC Card  The       unit is designed to provide a low noise interface to prototype or test    hardware  The PCCextend 120CIB is a 4 layer PC board with power    Sycard Technology Product Catalog 16 bit PC Card Development Tools    and ground planes  Four 34 pin headers with alternating grounds insure signal integrity  The   PCCextend 120CIB is designed for 16 bit PC Card applications  it   s sister product  the PCCextend   125CIB is designed for 32 bit CardBus applications    The PCCextend 120 can be ordered as follows    Order Number Description     PCCextend 120 16 bit PC Card flexible extender card with 5   cable extension  includes one  host interface board and one card interface board        120HIB PCCextend 120 host interface board    120CIB PCCextend 120 card interface board    12XCBL 5 
23. in    active    mode  takes control of PC Card configuration   or    passive    mode  displays  PC Card configuration without affecting the configuration    Ability to create and run    script    files to automate PC Card setup testing    Host System Requirements   PC Debug was designed to run in test systems with very little hardware resources  The best way to  bring up and test PC Cards is with as little software  i e   O S  and hardware interaction as pos   sible  With this in mind  the minimum requirements to run PC Debug are       286 or better CPU   a DOS 4 0 or better   a Diskette drive  or equivalent for loading PC Debug      Monochrome display       PCIC Compatible PC Card Controller  Intel 82365 SL or Cirrus  Vadem      equivalent    The program will run without a PCIC compatible controller  but will limit the number of  commands available     Optional items     CGA or VGA color monitor      Card and Socket Services  version 2 1 or better     Two button mouse     Hard disk drive     Windows Operating System    22    Sycard Technology Product Catalog Secure Digital Products    Secure Digital Products    SD extend 300    Secure Digital Extender Card   The SD extend 300 is an extender card for Secure  Digital cards  It provides developers of Secure Digital  hosts and cards a convenient way of accessing signals  on the interface  All 9 pins are accessible via standard  0 1    test posts  Multi layer design with separate ground  and power planes assure trouble free opera
24. initiating I O and memory transactions  It can also monitor the  CardBus interface for any type of cycle  The serial interface is useful for debugging a new design or  for component level debug  The PCCtest 560 includes an external control unit  PCCtest 551  that  provides the features of the PCCtest 455 with the addition of a serial port connector         PCCtest 455  External Control Unit  optional         E CardBus Configuration Header    x         zE 16 bit PC Card Configuration Header  PCCtest 460       Sycard Technology Product Catalog CardBus Development Tools    CardBus Development Tools    Sycard Technology offers  several products for  CardBus host and card  development  Our tools  are designed for engineer   ing as well as manufactur     ing environments     PCChost 1420   PCI to CardBus Bridge   Based on Texas Instruments    PCI1420 CardBus host adapter chip   the PCChost 1420 PCI to CardBus bridge provides the engineer  with a platform to evaluate a high performance ACPI compli    ant CardBus bridge device  Contained on a single Peripheral  Component Interconnect  PCI  bus card  the PCChost 1420 is  compatible with a wide variety of PC and non PC PCI hosts  TI   s  PCI1420 is part of their high performance line of PCI CardBus  bridges  The PCI1420 offers bridge performance approaching the theoretical 132MByte bandwidth  of the PCI Bus  The PCI1420 offers zoomed video support along with ACPI  The PCChost 1420  is designed to be used with Windows 98 ME 2000 XP  The
25. may effect the signal integrity  we have used longer cable lengths successfully in  several applications    Sycard Technology offers the PCCextend 125 in several configurations  For those that need  a ready made solution  the PCCextend 125 comes with both the host side and card side boards  along with a 5    extension cable  For those customers wishing to make their own cables  the host   125HIB  and card interface boards  125CIB  can be ordered without cables  The host and card  interface boards can also be used individually for special test and development needs     The PCCextend 125 can be ordered as follows     Order Number Description   PCCextend 125 CardBus flexible extender card with 5   cable extension  includes one host  interface board  125HIB  and one card interface board  125CIB      125HIB PCCextend 125 host interface board   125CIB PCCextend 125 card interface board   12XCBL 5 PCCextend 120 5    cable set    Sycard Technology Product Catalog CardBus Development Tools    PCCextend 125 HIB  CardBus Host Interface Board    For those applications that require access to the CardBus PC Card  interface that can   t use a standard extender card  Sycard provides the  PCCextend 125 HIB  Host Interface Board  which allows full access to  all 68 signal and power pins on the PC Card host  Standard 0 1    head   ers allow the user to connect standard 34  pin ribbon cable to test or 3  prototype hardware  The PCCextend 125HIB is ideal for interfacing a S  rae  prototype CardBu
26. of the  PCCproto 150 unit and a plug in daughter board that contains  the PCM16C02 and associated circuitry  The PCCproto 150 is a   flexible prototype board designed specifically for 16 bit PC Card A a      designs  Since most PC Card designs are based on low profile  high       pin count packages  the PCCproto provides special prototype areas  for these devices  These areas accept plugin    daughter boards    that support a particular package  type  The PCCproto 200 includes three of these boards supporting 64  100  144 and 176 pin TQFP  and 44  100 and 160 pin PQFP packages  Additional    daughter boards    may be purchased sepa   rately  An area reserved for I O provides connector locations for straight 0 1    headers and surface  mount connectors  The PCCproto is constructed using a multi layer design with clearly marked  signal names and pin numbers    To speed up software development  a sample PC Card client framework is included  The client  framework provides the designer with sample source code for a PC Card    95 compliant  client driver     Sycard Technology Product Catalog CardBus Test Tools    CardBus Test Tools    CardBus Socket Testers  PCCtest 460    CardBus Socket Tester    The PCCtest 460 is designed to test the full functionality of the PC Card   CardBus interface  Since the 1995 and subsequent releases of the PC Card  Standard  the number of different cards that can be supported in a single  machine has drastically increased  It is not uncommon for a PC C
27. ontrollers   All O2 Micro Instrument Controllers   All CardBus controllers    a  a  a    Any other controllers that require card detects active prior to power up    Sycard Technology Product Catalog 16 bit PC Card Development Tools    16 bit PC Card Development Tools    Extender Cards Socket Savers    PCCextend 50  16 bit PC Card Socket Saver  amp  Extender    In a high volume production environment a PCCtest socket tester may see sev   eral thousand insertion removal cycles a month  To prevent wear and tear on the  PCCtest   s 68 pin connector  Sycard supplies a low cost    socket saver     the PCCextend Ty ren        Sycard Technology offers  several 16 bit PC Card devel     opment and prototype tools 50  The unit is inserted between the 16 bit PC Card socket and the PCCtest unit   designed for engineering as The PCCextend 50 can also be used as a    Type extender    which allows the  well as the manufacturing user to insert a Type III PC card  10 5mm thick  into a Type I  3 3mm  or Type II    environments      5 0mm slot  By using the PCCextend 50  Type III peripherals  such as hard disk  drives or RF radio devices  can be inserted into computers that only support Type I  or Type II cards  Before attempting to use the PCCextend 50 in such an application  the  user should verify if the power consumption of the Type III  PC Card is compatible with  the host system     PCCextend 100  16 bit PC Card Extender Card    The PCCextend 100 is the ultimate in extender cards  It provi
28. rd Controllers   All CardBus controllers     Any other controllers that require card detects active prior to power up       Engineering PC Card Socket Testers    PCCtest 350  16 bit PC Card Socket Tester for 5 Volt Systems    The PCCtest 350 socket tester provides a quick and easy way of verifying the operation of a host  socket  Housed in a Type II PC Card  the PCCtest includes software to test a wide variety of socket  controllers from Intel  Cirrus Logic  Vadem  Ricoh  Omega Micro and VLSI Technology  The  PCCtest socket tester verifies all signals on the 16 bit PC Card interface including accurate Vcc and  Vpp measurements    Manufacturers  service centers and developers of PC Card products can benefit from the quick  verification of their 16 bit PC Card hosts  How many times have you wondered if the problem  you were having was hardware  software or both  A 15 second test by the PCCtest can save hours  of debug work by validating the hardware portion of the 16 bit PC Card interface  Some of our  PCCtest customers were able to find design errors in products they already had in production    The PCCtest 350 extends the capabilities of the PCCtest 250 by adding a serial interface for     backdoor    debugging of the PC Card interface  If the socket appears completely    dead     the user  can debug by accessing the PCCtest   s internal registers  Data  address and strobe signals may be  monitored or asserted  The PCCtest 350 is perfect for bringing up a PC Card host design 
29. rd to be inserted into a 50 pin  CompactFlash    socket  Developers of CompactFlash    products can now  use a standard PC Card form factor as a starting point for new designs   While the 50 pin CompactFlash    interfaces eliminates address lines A11   A25 and the Vpp programming pins  many current PC Cards may work  under those conditions    The CF extend 165 contains all the standard features of our CFextend  160 CompactFlash    extender  All 50 pins are accessible via standard 0 1     test posts  Multi layer design with separate ground and power planes assure  trouble free operation  All signal pins are clearly marked with both I O       and memory mode designations  A jumper blocks on Vcc allow for easy  current measurements  Dual LEDs indicate if the socket is running at 3 3V  or 5V  The CF Extend 165 also includes momentary switches to interrupt  the Card Detect signals for fast removal insertion testing    In addition  the CF extend 165 includes a current limiting device that will help protect the host  from supplying excessive current  CF extend 165 is a solid unit designed for years of reliable ser   vice     CF extend 166  amp  CF extend 167   CompactFlash     to PC Card Flexible Adapter Extender Cards   The CFextend 166 and 167 CompactFlash    to PC Card adapters are  designed to allow a 68 pin PC Card to be plugged into a CompactFlash     socket  These cards are constructed with a flexible circuit to allow a the PC  Card to be mounted in a number of orientations  
30. rovide a convenient place to ground a  scope probe or analyzer  Vcc test points are available for easy voltage measure   ments  Dual LEDs indicate if the Vcc is at 3 3V or 5V  A resettable current pro   tection device protects the host from Vcc to ground shorts  Jumpers can isolate  Vcc and Vpp supplies for easy current measurements    All too often extender cards are the source of many signal integrity problems        The CF extend 180 is designed to minimize the signal degradation by using proven design tech   niques  Separate Vcc and ground planes provide a low inductance path to the host socket  High  frequency X7R and bulk tantalum capacitors keep supply rails clean  The CF extend 180 uses four  34 pin ribbon cables to connect the host and card interface boards insuring that each signal has a  ground return    The CF extend 180 comes standard with a 5    extension cable  Although distances greater than a  few inches may effect the signal integrity  we have used longer cable lengths successfully in  several applications    Sycard Technology offers the CF extend 180 in several configurations  For those that need a  ready made solution  the CF extend 180 comes with both the host side and card side boards along  with a 5    extension cable  For those customers that wish to make their own cables  the host and  card interface boards can be ordered without cables  The host  18OHIB  and card  180CIB  inter   face boards can also be used individually for special test and developm
31. s design to the PC Card host socket and is designed   to provide a low noise interface to prototype or test hardware  The  PCCextend 125HIB is a 6 layer PC board with signal traces surrounded  by ground traces and power planes  Four 34 pin headers with alternating  grounds insure signal integrity  The PCCextend 125HIB is designed for  32 bit CardBus PC Card applications  it   s sister product  the PCCextend  120HIB is designed for 16 bit PC Card applications     PCCextend 125CIB  CardBus Card Interface Board    For those applications that require access to the CardBus PC Card that  can   t use a standard extender card  Sycard provides the PCCextend  125CIB  Card Interface Board  which allows full access to all 68 signal  and power pins on the CardBus peripheral  Standard 0 1    headers allow  the user to connect standard 34 pin ribbon cable to test or prototype  hardware  The PCCextend 125CIB is ideal for connecting test or develop   ment hardware to a 32 bit CardBus PC Card and is designed to provide  a low noise interface to prototype or test hardware  The PCCextend  125CIB is a 4 layer PC board with power and ground planes  Four 34 pin  headers with alternating grounds insure signal integrity  The PCCextend  125CIB is designed for CardBus PC Card applications it   s sister product   the PCCextend 120CIB is designed for 16 bit PC Card application     reeni       PCCextend 140   CardBus Extender Card   The PCCextend 140 was designed from the ground up to support the  higher 
32. s of debug work by validating  the hardware portion of the CompactFlash    interface    The CFtest 220 includes a technical reference manual which will assist the user in writing test code   Sycard supplies software support for MSDOS and WinCE platforms     Sycard Technology Product Catalog SmartMedia     Products    SmartMedia    Products    SMextend 750  SmartMedia Extender Card  The SMextend 750 is an extender card for SmartMedia cards  It provides developers of  SmartMedia or SSFDC hosts and cards a convenient way of accessing signals on the interface  All  22 pins are accessible via standard 0 1    test posts  Multi layer  design with separate ground and power planes assure trouble  free operation  All signal pins are clearly marked with both  I O and memory mode designations  Jumper blocks on Vcc  allow for easy current measurements  Dual LEDs indicate if the  socket is running at 3 3V or 5V  The SMextend 750 is a solid    unit designed for years of reliable service        20    Sycard Technology Product Catalog PCI Products    PCI Products    Extender Cards    PClextend 174  32 bit PCI Extender Card    The PClextend 174 is an extender card and debug tool for  32 bit PCI designs which supports both manufacturing  and engineering needs  As an extender card the PClextend  extends a PCI card 2 5  above the host computer  Jumpers  blocks on all power supplies allow for current consumption  or voltage margin testing  Multiple power status LEDs indi   cate 3 3V  5V   12V and 
33. tFlash interface     In order to determine if a particular card host combination will work  Sycard offers a more  flexible development card  the CFextend 165  The CFextend 165 provides probe points and cur   rent measurement test points to allow for detailed compatibility analysis     The CF extend 166 167 is constructed of high quality materials for long service life  Connectors  16    Sycard Technology Product Catalog CompactFlash    Development Tools    are rated for 10 000 insertion removal cycles and the Kapton circuit board allows for maximum  flexibility and wear resistance     CF extend 180  CompactFlash    Flexible Extender Card    The CF extend 180 is a flexible extender card designed to provide easy access   to a CompactFlash    card for debug or test  Designed with the same low noise  characteristics of our CF extend 160  the CF Extend 180 takes this design a step  further by connecting the host and card via ribbon cables  The flexible extender  consists of two PC boards  the host interface board and the card interface board   The host interface board is inserted into the host   s CompactFlash    slot  Four  26 pin ribbon cables connect the host interface board to the card interface  board  The CompactFlash    card to be tested is inserted into the card interface  board   s 50 pin connector  It will accept both 3 3mm Type I and 5 0mm Type II  CF cards    The CF extend 180 was designed with the engineer and technician in mind   Thoughtfully placed grounding posts p
34. tion  All  signal pins are clearly marked  Jumper blocks allow  any signal or power pin to be interrupted for testing or  current measurements  A LED indicator shows power       eee ee   rhinos 2  a  PRETO          status        23    
35. ucts can benefit from the quick  verification of their PC Card hosts  How many times have you wondered if the problem you were  having were hardware  software or both  A 15 second test by the PCCtest can save hours of debug  work by validating the hardware portion of the 16 bitt PC Card interface  Some of our customers  of the PCCtest product were able to find design errors in products they already had in production    The PCCtest 250 is designed to test products based on the original PCMCIA 2 1 release  The  PCCtest verifies all data  address and strobe signals at 5 0 volts  The PCCtest 250 is best suited for  the following PC Card controllers     Cirrus Logic CL PD6710   Cirrus Logic CL PD6720   Intel 82365SL   Vadem VG 365   Vadem VG 465   Vadem VG 468   VLSI 82C146   And any other 5V only 16 bit PC Card implementation    Sycard Technology Product Catalog 16 bit PC Card Test Tools    The following Sycard  test card models are for  engineering purposes   m PCCtest 350  m PCCtest 370 373    PCCtest 270 273  16 bit PC Card Socket Tester with 3 3V and DMA Support    The PCCtest 270 and 273 socket testers provides a quick and easy way of verifying the operation of  a host socket  Housed in a Type II PC Card  the PCCtest includes software to test a wide variety of  socket controllers from TI  Cirrus Logic  Vadem  Ricoh  Omega Micro and VLSI Technology  The  PCCtest socket tester verifies all signals on the 16 bit PC Card interface including accurate Vcc and  Vpp measurements    
36. y made solution  the PCCextend 120 comes with both the host side and card side boards along  with a 5    extension cable  For those customers that wish to make their own cables  the host and  card interface boards can be ordered without cables  The host and card interface boards can also be  used individually for special test and development needs        PCCextend 120 HIB  16 bit PC Card Host Interface Board    For those applications that require access to the 16 bit PC Card  interface that can   t use a standard extender card  Sycard provides  the PCCextend 120 HIB  Host Interface Board  which allows full  access to all 68 signal and power pins on the PC Card host  Standard  0 1    headers allow the user to connect standard 34 pin ribbon cable  to test or prototype hardware  The PCCextend 120HIB is ideal for  interfacing a prototype 16 bit PC Card design to the PC Card host  socket  The unit is designed to provide a low noise interface to proto   type or test hardware  The PCCextend 120HIB is a 6 layer PC board  with signal traces surrounded by ground traces and power planes   Four 34 pin headers with alternating grounds insure signal integrity  The PCCextend 120HIB is  designed for 16 bit PC Card applications  it   s sister product  the PCCextend 125HIB is designed  for 32 bit CardBus applications   The PCCextend 120 can be ordered as follows   Order Number Description    PCCextend 120 16 bit PC Card flexible extender card with 5   cable extension  includes one   host inter
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
取扱説明書  General Specifications  instrucciones    OM, PG400, PG280, PG 400, PG 280, 2010-02, EN  Toshiba Satellite L955D-S5140NR  LEON2 Processor User`s Manual  Data Manager User Manual  Utilisation de GNSS pour la détermination de points de détail en      Copyright © All rights reserved. 
   Failed to retrieve file