X3HR - Suunto
Contents
1. If it has been activated previously it displays the pre viously measured heart rate The new heart rate is displayed if the connection with the signal is present within 5 minutes after the activation of this shortcut Temperature and Absolute air pressure Displays the temperature C F and the absolute air pressure hPa InHg in the units of your choice The air pressure and temperature are updated every time you select this shortcut and every 15 minutes if the selection active for a longer time period 3 2 2 Day Day is one of the three shortcuts that can be seen on the bottom row of the Time mode s main display Short press SET to scroll to the Day shortcut When it is visible you access its functions by long pressing SET a list of the functions and instructions on how to use them Set Alarm To set an alarm 1 In the function menu Set Alarm is already the first menu item Short press SET to select it The alarm information is displayed on the screen status time The alarm status is activated 2 Press either the up or down arrow to change the alarm sta tus to On Short press SET The hour selection is acti vated 3 Set the correct hour with the arrow buttons and press SET The minute selection is activated 4 Set the correct minutes with the arrow buttons and press SET The Set Alarm text on the bottom row is activated Now you can either 17 18 5 Long press SET to switc2. this means that the barometric pressure has changed due to weather To receive correct altitude readings always set the reference altitude when the weather changes considerably SUUNTO 22 Units This setting is used for defining the altitude air pressure and temperature formats To change Units In the function menu scroll to Units with the arrow buttons and short press SET The altitude format on the middle row left side is activated e yA 2 Change the altitude unit m ft with the arrow buttons and 3 short press SET The air pressure format on the top rowis activated 3 Change the air pressure unit hPa inHg with the arrow buttons and short press SET The temperature format on middle row right side is activated 4 Change the temperature unit C F with the arrow buttons and short press SET The Units text on the bottom row is activated Now you can either 5 Long press SET to switch back to the main display 6 or scroll to the next selection with the arrows by Map So SUUNTO 23 3 3 TRAINING MODE 3 3 1 Main display The main display of the Training mode has three rows Stopwatch overall running time split time lt 0000 The top row displays the overall running time split time When you start the stopwatch with START STOP this row BB a displays the overall running time from the start However if 15m press ARROW DOWN LAP when
3. you can access its functions by long pressing SET 15 a list of the func tions and instructions on how to use them SUUNTO 27 Altitude To set the Altitude This setting is used for defining the current altitude Suunto X3HR uses the set altitude as a benchmark for the altitude changes measured from the air pressure changes 1 In the function menu Altitude is already the first menu the middle row is activated Units item Short press SET to select it The current altitude on ture are displayed gt 5 2 Set the new altitude 500 to 9000m 1500 to 299958 with the arrow buttons and short press SET The Altitude text on the bottom row is activated Now you can either 3 Long press SET to switch back to the main display 4 or scroll to the next selection with the arrows This setting is used to define the format in which altitude air pressure and tempera activated 28 To change Units 1 In the function menu scroll to Units with the arrow buttons is left side is activated 9 SUUNTO and short press SET The altitude format on the middle row 2 Change the altitude unit m ft with the arrow buttons and short press SET The air pressure format on the top row is 3 Change the air pressure unit hPa inHg with the arrow buttons and short press SET The temperature format on middle row right side is activated 4 Change the
4. any time without notice The latest version of this documentation can always be downloaded in www suunto com 6 2 TRADEMARKS Suunto Wristop Computer Suunto X3HR Replacing Luck and their logos are regis tered or unregistered trademarks of Suunto Oy All rights are reserved Suunto X3HR is manufactured for Suunto Oy 6 3 CE COMPLIANCE The CE mark is used to mark conformity with the European Union EMC directives 89 336 EEC 6 4 ISO 9001 COMPLIANCE Suunto s Quality Assurance System is certified by Det Norske Veritas to be ISO 9001 compliant in all SUUNTO Oy s operations Quality Certificate No 96 HEL AQ 220 36 7 LIMITS OF LIABILITY If this product should fail due to defects in materials or workmanship Suunto Oy will at its sole option repair or replace it with new or rebuilt parts free of charge for two 2 years from the date of its purchase This warranty is only extended to the original purchaser and only covers failures due to defects in materials and workmanship that occur during normal use while in the period of the warranty IL does not cover battery battery replacement damage or failures resulting from acci dents misuse neglect mishandling alteration or modifications of the product or any failure caused by operation of the product outside the scope of its published specifica tions or any causes not covered by this warranty There are no express warranties except as listed above The client can exercise t
5. bottom row is activated Now you can either 3 Long press SET to switch back to the main display 4 or scroll to the next selection with the arrows Set Limits This selection determines the upper and lower Heart rate limits Heart rate outside these values activates the alarm either by flashing the heart rate digits or flashing the digits and activating the alarm tone The top row displays the upper limit higher HR 20 than this activates the alarm and the middle row the lower limit lower HR than this activates the alarm To set the limits 1 In the function menu scroll to Set Limits with the arrow buttons and short press SET The upper limit is activated 2 Set the upper limit max 239 with the arrow buttons and short press SET The lower limit is activated 3 Set the lower limit min 31 with the arrow buttons and short press SET The Set Limits text on the bottom rowis activated Now you can either 4 Long press SET to switch back to the main display 5 or scroll to the next selection with the arrows Al Tone This selection determines whether the alarm tone activated when the current heart rate goes outside the upper or lower HR limit The alarm tone remains active as long as the heart rate is outside the set limits see above To set the Al Tone 1 In the function menu scroll to A tone with the arrow but tons and short press SET The current alarm state 5 acti vated 2 Change
6. detect the ECG electrocardiogram signals e Jumping into the water or strenuous muscle movement during swimming may cause water resistance that shifts the transmitter on the body to a location where it cannot pick up the ECG signal The ECG signal strength varies depending on the individual s tissue composition People have more problems with heart rate measurement in water than elsewhere 3 MODES 3 1 GENERAL INFORMATION Suunto X3HR has three modes Time Training and Memory To select a mode press either the up or down arrow When you change from one mode to another the name of the new mode is displayed on the bottom row of the display for a short while 3 2 TIME MODE In the Time mode you can view the current time date temperature and absolute air pressure You can also use it to set alarms and monitor your heart rate 3 2 1 Main display The main display of the Time mode has three rows e Ly ij Date anus 1 The top row displays the date the selected format dd mm 44025 or mm dd 2 _ Time SUUNTO The middle row displays the time in the selected format 12h 24h Shortcuts The bottom row displays alternatively the weekday the heart rate or the temperature and absolute air pressure Switch between these with SET Weekday Displays the current weekday three letters Heart rate Displays your heart rate When you activate this shortcut for the first 16 time it displays the figure
7. of ascent recorded 3 Display The bottom row displays the text High Low The middle row displays the highest altitude recorded during training in the unit of your choice m ft The top row displays the lowest altitude recorded during training in the unit of your choice m ft 4 14 Displays The bottom row displays the lap number and time The middle row displays the heart rate at the time of the lap split recording The top row dis plays the split time The displays that follow the number 4 are similar There are as many displays as there are lap splits recorded maximum 10 Last display The middle row displays the text End The bottom row displays the date and time when the training session ended Long press SET at any time to stop navigating through the summary displays Suunto X3HR returns back to the main display and the date and time of the train ing session you just investigated is displayed on the bottom row When you long press SET Suunto X3HR returns to the main memory display of the file that is displayed at the moment NOTE A training session cannot be seen in the memory until the stopwatch has been switched off NOTE The values that are shown in the displays 1 3 are updated in 10s intervals when the stopwatch active NOTE You cannot change the main modes with the arrow buttons when you browse through the memory summary displays First you have to long press SET to return to the main display and t
8. of the backlight altimeter compass and heart rate monitor will sig nificantly reduce battery life You can replace the batteries yourself as long as you do it properly to avoid any leak age of water into the battery compartment or computer Always use original battery replacement kits They include a new battery battery lid and O ring You can pur chase the battery kits from official Suunto retailers NOTE When replacing the battery also replace the battery lid and O ring Never use the old ones NOTE Change the battery at your own risk Suunto recommends you to have the batteries changed in official Suunto services 6 To replace the battery Insert a coin into the slot located on the battery compartment cover on the backside 1 2 3 of your Suunto X3HR Turn the coin counterclockwise until it is aligned with the open position marker Remove the battery compartment cover and the O ring and discard them Ensure that all surfaces are clean and dry Remove the old battery carefully Place the new battery into the battery compartment under the metal contact clip with the positive side facing up With the O ring in the correct position replace the battery compartment cover and turn it with the coin clockwise until it is aligned with the closed position marker Do not press onto the battery compartment cover while turning it with a coin NOTE Perform battery replacement with extreme care to ensure th
9. the arrow buttons and short press SET The year selection is activated Lap Set the correct year the years 01 49 on the display mean 2001 2049 with the arrow buttons and short press SET The Set Date text on the bottom row is acti vated Now you can either 5 Long press SET to switch back to the main display 6 or scroll to the next selection with the arrows 3 2 3 Heart rate Heart rate is one of the three shortcuts that can be seen on the bottom row of the Time mode s main display Short press SET to scroll to the Heart rate shortcut When it is visible you can access its functions by long pressing SET Here is a list of the functions and instructions on how to use them HR Limits This setting determines whether the HR limit alarm is active or not The alarm informs you when your heart rate goes outside the upper or lower HR limit Two different sounds are used to inform whether it is outside the upper or the lower limit The HR value also starts to flash on the main display when the alarm is activated If A tone is set off see page 24 and HR Limits On the Suunto X3HR only flashes the HR digits To set the HR limits 1 In the function menu HR Limits is already the first menu item Short press SET to select it The state of the set HR limits on the middle row of the display is activated 2 Change the state with the arrow buttons and short press SET The HR Limits text on the
10. the button is displayed However if you have not pressed ARROW DOWNILAP previously the time displayed here is the same as on the top row and the lap number is 1 The number of laps is displayed on the left side of the time value with a smaller font than the running time When you stop the stopwatch with START STOP the lap time also stops running and remains to display the number of laps and the time of the last lap When you reset the stopwatch by long pressing START STOP this display is also reset and shows 0 00 0 default value The maximum number of laps splits stored in one training is 10 After the 10th lap split no more values are stored in the memory Although the lap split values are displayed as before the lap number indicator just displays If the interval timer is set on and at least one interval value is set this row displays the interval time in a countdown style So for example if the interval is set to 3 00 this row shows time running backwards from three minutes and when it reaches zero it starts again from the set interval The number of repetitions is shown on the left side with smaller digits This countdown procedure is activated when you start the stop watch with START STOP All these actions can will be performed even when this shortcut is not displayed Altitude This displays the current altitude based on the air pressure changes after your latest Altitude value definition The altitude is di
11. the state with the arrow buttons and short press SET The Tone text on the bottom row is activated Now you can either 3 Long press SET to switch back to the main display 4 or scroll to the next selection with the arrows SUUNTO SUUNTO 21 3 2 4 Temperature and absolute air pressure Temperature and absolute air pressure is one of the three shortcuts that can be seen on the bottom row of the Time mode s main display Short press SET to scroll to the Temperature and absolute air pressure shortcut When it is visible you can access its functions by long pressing SET Here is a list of the functions and instructions on how to use them Altitude You can use this setting to define the current altitude Suunto X3HR uses the set alti tude as a benchmark for the altitude changes measured from the air pressure changes To set the altitude 1 In the function menu Altitude is already the first menu item Short press SET to select it The current altitude on the middle row is activated Set the new altitude 500 m to 9000m 1500 to 29995ft with the arrow buttons and short press SET The Altitude text on the bottom row is activated Now you can either 3 Long press SET to switch back to the main display 4 or scroll to the next selection with the arrows NOTE Suunto X3HR measures the altitude from the barometric pressure If it dis plays different altitude readings at the same location on different days
12. until it is aligned with the close position marker NOTE You should change the battery cover and the O ring simultaneously with the battery to ensure that the transmitter remains clean and water resistant Replacement covers are available from Suunto as accessories 2 HOW USE YOUR SUUNTO X3HR 2 1 DISPLAY When your Suunto X3HR leaves the factory it displays the rows of the Time mode s main display date time and week g day 3 In addition to mode specific information the Suunto X3HR E display includes several symbols os 2 1 1 Function symbols 2 The function symbols indicate that either function has been activated such as Alarm or something needs to be done SUUNTO battery symbol The function symbols are Y Heart Active when the device is receiving the heart rate signal The symbol is displayed next to the measured heart rate Stopwatch Active when measuring time in the Training mode or when the stop watch has not been reset HR limit arrows Active when the HR limits have been set m HR limit alarm Active when Al Tone is and HR limits have been set on MA Alarm Active when the alarm function is on Low battery Active when battery needs changing MEM Active when in the Memory mode lt shows that you are viewing a MEM memory entry and not the active training data 9 SET Y 2 2 3 SET button Short press ARROW UP LIGHT 2 2 BU
13. SUUNTO 258 INSTRUCTION MANUAL SUUNTO REPLACING LUCK PAR UA lt III lt gt 2 Lap sp lt gt TRAINING FS F MEMORY LOG 1 8 SS Altitude Alarm 4 y r Limits Interval nterval Al t gt 9 3 i r Limits Log Sumi Set Limits Units Date y Al Tone y Intervals Units Set Limits Al Tone y Log Data t UP LIGHT DOWN LAP press lt gt SET Long press INSTRUCTION MANUAL CUSTOMER SERVICE CONTACTS Suunto Oy Phone 358 9 875870 Fax 358 9 87587301 Suunto USA Phone 1 800 543 9124 Canada Phone 1 800 776 7770 European Call Center Phone 358 2 284 11 60 Suunto Website www suunto com 1 1 1 1 HOW TO START TRAINING 1 2 CARE AND MAINTENANCE 1 2 1 Care of the Suunto 1 2 2 Care of the Transmitter Belt 1 3 WATER RESISTANCE 1 4 1 5 BATTERY REPLACEMENT OF THE TRANSMITTER BELT 2 HOW TO USE YOUR SUUNTO X3HR 2 1 1 Function symbols 2 2 1 Short and long p
14. TART STOP to stop recording 10 Read this manual to see what else you can do with your new Suunto X3HR 4 1 2 CARE AND MAINTENANCE 1 2 1 Care of the Suunto X3HR Only perform the procedures described in this manual Never attempt to disassemble or service your Suunto X3HR Protect your Suunto X3HR from shocks extreme heat and prolonged exposure to direct sunlight Avoid rubbing the Suunto X3HR against rough surfaces as this may scratch the face II not in use your Suunto X3HR should be stored in a clean dry environment at room temperature The Suunto X3HR be wiped clean with a lightly moistened warm water cloth If there are stubborn stains or marks you can apply mild soap to the area Do not expose the Suunto X3HR to strong chemicals such as gasoline cleaning solvents acetone alcohol insect repellents adhesives and paint as they will damage the unit s seals case and finish Make sure the area around the sensor is kept free of dirt and sand Never insert any objects into the sensor opening 1 2 2 Care of the Transmitter Belt Wash the transmitter regularly with mild soap and water after each use Rinse with pure water dry thoroughly and carefully Store in a cool dry place Never store the transmitter wet Moisture keeps the elec trodes wet and transmitter activated thereby shortening the battery life Do not bend or stretch the transmitter this may damage the electrodes 1 3 WATER RESISTANCE Suunto X3HR and the
15. TTONS 2 2 1 Short and long press The buttons may have different functions depend ing on how long you press them The ordinary press or short press means that the button is pressed quickly The long press means that the button is pressed for more than 2 seconds 2 2 2 START STOP button Short press Starts and stops the Stopwatch in the Training mode Long press Resets the Stopwatch time displays top and bot tom rows in the Training mode Switches between the shortcuts on the bottom row of the display When you change units it accepts the current selection and moves to the next selection The next selection starts flashing In the Memory mode it is used to view the selected displays of the recorded train ing sessions 10 Long press Goes deeper into the functional hierarchy of the chosen shortcut The top level function is displayed on the bottom row of the mode s main display e Returns to the main display and accepts the current selections 2 2 4 ARROW UP LIGHT button Short press Scrolls to the next mode Changes the selected unit or setting to a different one e g On Off Increases the selected numeric values e Navigates to the next adjusting selecting state displayed on the bottom row Long press Activates the backlight of the display The light is active for 10 seconds after the last push of a button 2 2 5 ARROW DOWNILAP button Short press Scro
16. at your Suunto X3HR remains water resistant Careless battery replacement may void warranty WARNING This Suunto product contains a Lithium cell battery To reduce risk of fire or burns do not disassemble crush puncture short external contacts charge or dis pose of in fire or water Replace only with manufacturer specified batteries Recycle or dispose of used batteries properly 7 1 5 BATTERY REPLACEMENT OF THE TRANSMITTER BELT The transmitter belt operates on a 3 Volt lithium cell type CR 2032 The transmitter belt s average expected battery life is 300 hours of use in ideal oper ating temperatures When the Suunto X3HR 15 not receiving a signal but the transmit ter belt is active a change of battery might be necessary Refer to section 2 4 2 for other factors that can interfere with a correct signal To change the battery 1 Insert a coin into the slot located on the battery compartment cover on the backside of the transmitter belt 2 Turn the coin counterclockwise until it is aligned with the open position marker or even slightly further for easy opening 3 Remove the battery compartment cover Ensure that the O ring and all surfaces are clean and dry Do not stretch the O ring 4 Remove the old battery carefully 5 Place the new battery into the battery compartment with the positive side facing 6 With the O ring in the correct position replace the battery compartment cover and turn it with the coin clockwise
17. ear high voltage power lines traffic lights overhead lines of electric railways electric bus lines or trams televisions car motors bike computers some motor driven exercise equipment cellular phones or when you walk through electric security gates 2 4 3 Warnings Persons who have a pacemaker defibrillator or other implanted electronic device use the heart rate monitor at their own risk and it is recommended they undergo an exer cise test under a doctor s supervision before using the heart rate monitor for the first 14 time This will ensure the safety and reliability of the pacemaker and heart rate moni tor when being used simultaneously Exercise may include some risk especially for those who have been sedentary We strongly advise you to consult your doctor prior to beginning a regular exercise pro gram It is best to position the Wristop computer within 3 feet or 1 meter of the transmitter Ensure no other transmitters are within that range signals from other transmitter s can cause an incorrect readout Repeated kinetic shock to the Suunto X3HR may cause an incorrect heart rate read out and should be avoided 2 4 4 The Suunto X3HR and transmitter belt usage in water Heart rate measurement in water is technically demanding for the following reasons Pool water with a high chlorine content and seawater may be very conductive and the electrodes of the transmitter may get short circuited the transmitter unit cannot
18. election with the arrows 1 by AD OS SUUNTO 26 Intervals This setting is used to define the used interval s for the interval function To define the Intervals 1 In the function menu scroll to Intervals with the arrow but 46 tons and short press SET The minute selection is acti nein vated 2 56 the minutes with the arrow buttons and short press Hi SET The second selection is activated 3 Set the seconds with the arrow buttons and short press SET The minute selection for the interval number two is activated If you only wish to set one interval long press SET after this selection and you return to the main display 4 Set the minutes for the interval number two with the arrow buttons and short press SET The second selection for the interval number two activated 5 Set the seconds for the interval number two with the arrow buttons and short press SET The Intervals text on the bottom row is activated Now you can either 6 Long press SET to switch back to the main display 7 scroll to the Interval selection with the arrows Before the stopwatch is activated this shortcut displays the HR Limits you have defined 3 3 3 Altitude Altitude is one of the three shortcuts that can be seen on the bottom row of the Train ing mode s main display Short press SET to scroll to the Altitude shortcut When it is visible
19. h back to the main display 6 or scroll to the next selection with the arrow buttons Set Time To set the time 1 In the function menu scroll to Set Time with the arrow but tons and short press SET The current time 5 displayed on the middle row with the seconds active 4 Set the correct hour with the arrow buttons and short row is activated 2 Reset the seconds with the arrow buttons and short press SET The minute selection is activated press SET The 12 24h display format selection on the top 3 Set the correct minutes with the arrow buttons and short press SET The hour selection is activated 5 Choose either 12h or 24h format with the arrow buttons and short press SET The time format on the middle row also changes on the basis of the selection The Set Time text on the bottom row is activated Now you can either 6 Long press SET to switch back to the main display 7 or scroll to the next selection with the arrows Set Date To set the date In the function menu scroll to Set Date with the arrow but tons and short press SET The current date is displayed on the middle row and the day selection is active The date format depends on the time selection In the 12h format the month is displayed before the day and in the 24h for mat it is the other way round 2 Set the correct day 1 31 with the arrow buttons and short press SET The month selection is activated 3 Set the correct month 1 12 with
20. he measured training session The top row 2 displays the total time of the training in minutes seconds 45000 5 and tenths of a second Or in hours minutes and seconds if Y the measured training has lasted more than one hour 4 Average Heart rate The middle row displays the average og heart rate during training SUG 2 Identification of the recorded training session bot tom row displays the date and time of each training session stored the memory The time is the starting moment of the stopwatch The maximum number of training sessions that can be stored in the memory is 8 When the memory is full and you store a new training session the oldest session is erased from the memory To view a specific training session 1 Short press SET to scroll to the desired training session 2 Long press SET to choose the training session The Date Time of the training is acti vated and the following summary displays can be viewed with ARROW UP LIGHT After the first display ARROW DOWN LAP can be used to navigate backwards 1 Display The bottom row displays the text Max Min The middle row displays the highest heart rate recorded during training HR symbol also displayed 30 The top row displays the lowest heart rate recorded 2 Display The bottom row displays the text Asc Dsc The middle row displays the total amount of descent recorded The top row displays the total amount
21. he right to repair under the warranty by contacting Suunto Oy s Customer Service department to obtain a repair authorization Suunto Oy and its subsidiaries shall in no event be liable for any incidental or consequential damages arising from the use of or inability to use the product Suunto Oy and its subsidiaries do not assume any responsibility for losses or claims by third parties that may arise through the use of this instrument 37 www suunto com O Suunto Oy 2 2003 1 2005
22. hen the main mode navigation functions normally 31 3 5 SUUNTOSPORTS COM SuuntoSports com is an international free Web community where you can participate in conversations find new locations for sporting activities rank and vote on different topics and of course find interesting material published by users Suuntosports com Suuntosports com offers you a number of features that help you make most out of your sports instrument and improve your performance To join the SuuntoSports com community connect to the Internet open your Web browser and go to www suuntosports com When the opening page appears click the Register icon and register yourself and your Suunto X3HR Please read the SuuntoSports com privacy policy before registration You can change and update your personal and equipment profiles in the My Suunto section afterwards After the registration you will automatically enter the SuuntoSports com home page that introduces the site structure and functional principles 32 4 SUUNTO X3HR SELF TEST PROCEDURE This chapter describes the Suunto X3HR self test procedure used for maintenance and testing purposes The test does not benefit the regular user in any way so you do not need to perform it The test is only described here because it is possible to activate it by accident and therefore it is necessary to know how to get back to the normal display So if you at any time see all the symbols on the display at the same ti
23. ii 1 INTRODUCTION The Suunto X3HR Wristop Computer is a reliable high precision electronic instrument that is intended for recreational use Outdoor enthusiasts and endurance athletes who enjoy sports such as hiking running and biking can rely on the Suunto X3HR s accuracy The Suunto X3HR features three main modes TIME TRAINING and MEMORY Each mode provides several sub functions further enhancing the usefulness to its owner If you do not perform any actions on any setting selecting states in five hours Suunto X3HR automatically returns to the main display of the current mode All key features and modes are discussed in detail in chapter 3 NOTE The Suunto X3HR should not be substituted for obtaining measurements that require professional or industrial precision and should not be used to obtain altitude or barometric measurements in extreme sports such as skydiving hang gliding paragliding and gyrocopter riding 1 1 HOW START TRAINING 1 Place the transmitter belt firmly around your chest 2 Wet the electrodes against your skin 3 Scroll to training mode with the UP or DOWN button of your Suunto X3HR 4 Check that you see your heart rate 5 Press START to start the stopwatch and memory recording 6 Go training If you are unsure read the manual and disclaimers first 7 Take lap times with DOWN LAP button 8 Change training information on the bottom row with SET button 9 When finished press S
24. lls to the previous mode Changes the selected unit or setting to a different one e g On Off Decreases the selected numeric values e Navigates to the previous adjusting selecting state displayed on the bottom row e When Stopwatch has been activated with START STOP this action stores the Split Lap times in the memory You can only navigate to another main mode with ARROW UP LIGHT when the Stopwatch has been activated Long press No specific functions 2 3 NAVIGATING IN THE FUNCTIONS The function menus are organized under the modes When you select a mode its main display appears In each mode you can display different sets of information on the bottom row These alternatives are called shortcuts They all include several shortcut specific settings You can change the shortcuts in each mode with the SET button When you long press SET in the mode s main display you enter the function menu of the active shortcut The name of the setting is displayed in reversed color on the bottom row and the values of the setting are displayed on the top and middle rows Press SET to enter the value fields You can change the value in the active flashing field by press ing up or down arrows Press SET again to enter the next field To return to the menu short press SET so many times that the name of the setting is displayed in reversed color again To navigate to the other settings of the shortcut press the up or down arrow when the set
25. me you have activated the self test procedure Follow the instructions below from step 2 to get back to the normal operation To perform the self test procedure 1 Press and hold all 4 keys at the same time for 5 seconds The device displays all the possible segments of the LCD 2 Press ARROW UP LIGHT The device starts to count down from 4 to 0 After the countdown is finished the top and middle rows display 5 zeroes 3 Press ARROW DOWN LAP The message TEST is displayed on the bottom row and the device emits a long beeping sound Then the message is displayed on the bottom row 4 Press SET A set of numbers appears on the top and middle rows 5 Press START STOP The device displays the Time mode s name and switches to the Time mode NOTE The self test procedure resets all the settings and clears the memory 33 5 TECHNICAL SPECIFICATIONS General Operating temperature 20 C to 50 C 4 F to 120 F Storage temperature 20 to 60 C 4 F to 140 F Weight 50 g Water resistant to 30m 100ft according to ISO 2281 standard User replaceable battery CR2032 Barometer Display range 300 to 1100 hPa 8 90 to 32 50 inHg Resolution 1hPa 0 01 inHg Accuracy 2 hPa 0 06 inHg Altimeter Display range 500m to 9000m 1600ft to 29995ft Resolution 1m 3ft Accuracy 20 Thermometer Display range 20 C to 60 C 4 F t
26. o 140 F Resolution 1 C 1 Accuracy 2 Calendar Clock e Resolution 1 s Programmed until Year 2049 34 Stop watch Interval timer Stop watch range 0 19 h 59 min 59 sec Lap time range 0 9 h 59 min 59 sec Lap split times max 10 training session Resolution 0 1 sec until 1h 1 sec 1h to 19 59 h Interval timer range 1 0 59 min 59 sec Upper row of LCD Interval timer range 2 0 39 min 59 sec middle row of LCD Maximum intervals 99 Heart Rate Resolution 1 beat Accuracy 1 beat min Display range 30 240 beats min HR upper limit 32 239 HR lower limit 31 238 Operating distance Max range 95 135 cm Transmitter belt Weight 59 0 User replaceable battery CR2032 Water resistant to 20m 66ft according to ISO 2281 standard Modulation frequency ca 5kHz 35 6 TERMS AND CONDITIONS 6 1 COPYRIGHT This publication and its contents are proprietary to Suunto Oy and are intended solely for the use of its clients to obtain knowledge and key information regarding the opera tion of Suunto X3HR products lts contents shall not be used or distributed for any other purpose and or otherwise communicated disclosed or reproduced without the prior written consent of Suunto Oy While we have taken great care to ensure that information contained in this documen tation is both comprehensive and accurate no warranty of accuracy is expressed or implied Its content is subject to change at
27. ress 2 2 2 START STOP button 2 23 SET D O orita ai lil id dosis 2 2 4 ARROW UP LIGHT 2 2 5 ARROW DOWN LAP button 2 3 NAVIGATING IN THE FUNCTIONS 2 2 4 HEART RATE MONITOR AND TRANSMITTER BELT 2 4 1 Activating the heart rate monitor 2 2 4 2 Electromagnetic interference Z 4 3 Warnings 2 4 4 The Suunto X3HR and transmitter belt usage in water 15 IIMODES A O 16 3 1 GENERAL INFORMATION 2222 16 22 2 16 321 Mad display 16 3 2 2 17 ER A 20 3 2 4 Temperature and absolute air pressure 22 3 3 TRAINING 5 9 99 3 3 1 Main display 3 9 2 SlOpwalCh il EN A 3 3 4 Hr Limits 3 4 MEMORY MODE 3 4 1 Main display 3 5 SUUNTOSPORTS COM anita ia aii it 32 4 SUUNTO X3HR SELF TEST PROCEDURE _ 33 5 TECHNICAL SPECIFICATIONS 2 2 6 TERMS AND CONDITIONS 6 1 COPYRIGHT 6 2 TRADEMARKS rad 6 3 CE COMPLIANCE cositas tds 6 4 ISO 9001 COMPLIANCE FZEIMITS OF LIABILITY i
28. splayed in the format of your 25 choice m ft Avg heart rate This displays the average HR measured from the start of the stopwatch The value is updated in real time throughout the training HRrelative to set HR limits A graphical indicator displays what the current HR is in relation to the set heart rate limits The indicator is displayed as a bar and a scale II the heart rate limits are off this shortcut is not available 3 3 2 Stopwatch Stopwatch is one of the three shortcuts that can be seen on the bottom row of the Training mode s main display Short press SET to scroll to the Stopwatch shortcut When it is visible you can access its functions by long pressing SET Here is a list of the functions and instructions on how to use them Interval This setting is used to activate deactivate the Interval that counts the intervals you have set maximum two different time intervals and alarms you when the time has run out and the new interval begins The alarm tone is different from the HR limits alarms To set the Interval On Off 1 In the function menu nterval is already the first menu item Short press SET to select it The Interval status is activated r 2 Press either the up or down arrow to change the Interval status to on Short press SET The Interval text on the bot tom row is activated Now you can either 3 Long press SET to switch back to the main display 4 or scroll to the Intervals s
29. temperature unit C F with the arrow buttons and short press SET The Units text on the bottom row is activated Now you can either 5 Long press SET to switch back to the main display 6 or scroll to the next selection with the arrows 3 3 4 Hr Limits Hr limits is one of the three shortcuts that can be seen on the bottom row of the Training mode s main display If the stop watch is activated and the Hr limits are on this shortcut shows your current heart rate in relation to the set heart rate limits Otherwise it shows the limits in numbers The brack ets in the graph indicate the set limits The two arrowheads show your heart rate II your heart rate is outside one of the limits the arrow heads flash Short press SET to scroll to the Hr limits shortcut When it is visible you can access its func tions by long pressing SET lts functions include Hr Limits Set Limits and Al Tone They are similar to the ones in sec tion 3 2 3 So you can find more information on their usage there al gt Lan 29 3 4 MEMORY MODE When you use Suunto X3HR for the first time and thus no memory files are stored in the memory all the numeric values of the memory files are replaced with and there are no lap displays You can still browse through the memory files with the arrow buttons 3 4 1 Main display The main display of the Memory mode has three rows Total time of t
30. the stopwatch is run ning the time elapsed since the start is displayed for 3 sec 2 After this the overall time is displayed until you press ARROW DOWN LAP again or stop the stopwatch with START STOP If the stopwatch is not active this row shows either the last time measured with the stopwatch or 0 00 0 default display if you have reset the stopwatch The overall time is displayed in minutes seconds and tenths of a second However if the measured time is more than one hour it is displayed in hours minutes and sec onds Heart rate The middle row displays the heart rate A heart symbol that flashes according to HR is also displayed on the left side of the HR value digits If the connection to the trans mitter belt is not established within 5 minutes after navigating to the Training mode this row displays zeros Shortcuts The bottom row displays alternatively the Overall Lap time Stopwatch Timer the Alti tude the Avg heart rate or HR relative to set HR limits if the Stopwatch is activated 24 and the HR limits are on If the Stopwatch is not activated and the HR limits are off the HR limits are displayed instead of the last two mentioned above Switch between these with SET Overall Lap time Stopwatch Timer When you start the stopwatch with START STOP this time measurement is identical to the one on the top row When you press ARROW DOWN LAP the time elapsed since the last press of
31. ting name is displayed in reversed color To return to the main display of the cur rent mode long press SET at any time during the setting process The following figure presents the basic idea of the menu structure 12 gt TRAINING A lt 2 lt Lapis lt lt ITUDE Hr LIMITS c MEMORY LOG 1 8 lt lt ES ES LE Set Limits Al Tone 9 e UP LIGHT DOWN LAP L SET Short press lt gt SET Long press 13 2 4 HEART RATE MONITOR AND TRANSMITTER BELT 2 4 1 Activating the heart rate monitor To activate the heart rate monitor 1 Attach the transmitter to the elastic strap 2 Adjust the strap length to fit snugly and comfortably Secure the strap around your chest below the chest muscles Lock the buckle 3 Raise the transmitter a little off your chest and carefully wet the grooved electrode areas on the backside 4 Check that the wet electrode areas are firmly against your skin and the logo is in a central upright position 5 Wear the Suunto X3HR as you would wear an ordinary watch NOTE You should wear the transmitter against your bare skin to ensure flawless operation However if you wish to wear the transmitter over a shirt moisten the shirt well under the electrodes 2 4 2 Electromagnetic interference Disturbances may occur n
32. transmitter belt are tested with ISO International Organization for standardization standard 2281 www iso ch This means that the product is water resistant In addition to the term water resistant Suunto X3HR is marked with an indication of a test overpressure given as a depth in meters 30m 100ft and trans 5 mitter belt 20m 66 ft This indication however does not correspond to a diving depth but refers to the pressure at which the water overpressure test was conducted This means that you cannot dive to a depth of 30m 100ft with your Suunto X3HR wristop computer or 20m 66 ft with the transmitter belt Rain shower swimming and other normal exposure to water will not affect its opera tion but the buttons shall not be pressed if exposed to water in any circumstances NOTE X3HR wristop computers and transmitter belts must not be used for diving 1 4 BATTERY REPLACEMENT Suunto X3HR operates on a 3 Volt lithium cell type CR 2032 The life expectancy is approximately 12 months in the Time mode A low battery warning indicator is activated on the display when approximately 5 15 percent of the battery capacity is still available When this occurs you should replace the battery However extremely cold weather may activate the low battery warning indicator even though the battery is still fully operational If the battery warning indica tor is activated in temperatures above 10 C 50 F replace the battery NOTE Heavy use
Download Pdf Manuals
Related Search