Home

BDV-E380

1. S O N Y 4 261 387 13 1 e Blu ray Disc DVD Home Theatre System Operating Instructions BDV E980 BDV E880 BDV E380 268 Do not install the appliance in a confined space such as a bookcase or built in cabinet To reduce the risk of fire do not coverthe ventilation opening of the apparatus with newspapers tablecloths curtains etc Do not place the naked flame sources such as lighted candles on the apparatus To reduce the risk of fire or electric shock do not expose this apparatus to dripping or splashing and do not place objects filled with liquids such as vases on the apparatus Do not expose batteries or apparatus with battery installed to excessive heat such as sunshine fire or the like To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions Indoor use only CAUTION The use of optical instruments with this product will increase eye hazard As the laser beam used in this Blu ray Disc DVD Home Theatre System is harmful to eyes do not attempt to disassemble the cabinet Refer servicing to qualified personnel only CAUTION CLASS 3R VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EYE EXPOSURE VORSICHT KLASSE 3R SICHTBARE UND UNSICHTBARE SERSTRAHLUNG WENN GE FFNET UNMITTELBAREN AUGENKONTAKT VERMEIDEN ADVARSEL SYNLIG 06 USYNLIG LASERSTRALING AF KLASSE 3R VED BNING UNDG AT SE DIREKTE PA STRALEN ADVARSE
2. W Initialize Personal Information You can erase your personal information stored in the system sjueunsn py pue sumas 63 GB 6450 Additional Information Precautions On safety To prevent fire or shock hazard do not place objects filled with liquids such as vases on the system or place the system near water such as near a bathtub or shower room Should any solid object or liquid fall into the cabinet unplug the system and have it checked by qualified personnel before operating it any further Do not touch the AC power cord mains lead with wet hands Doing so may cause an electric shock On power sources Unplug the unit from the wall outlet mains if you do not intend to use it for an extended period of time To disconnect the cord pull it out by the plug never by the cord On placement Place the system in a location with adequate ventilation to prevent heat build up in the system Athigh volume over long periods of time the cabinet becomes hot to the touch This is not a malfunction However touching the cabinet should be avoided Do not place the system in a confined space where ventilation is poor as this may cause overheating Do not block the ventilation slots by putting anything on the system The system is equipped with a high power amplifier If the ventilation slots are blocked the system can overheat and malfunction Do not place the system on surfaces rugs blankets
3. The dark area of the picture is too dark the bright area is too bright or unnatural Set Picture Quality Mode to Standard default page 40 The picture is not output correctly Check the Output Video Format settings in Screen Settings page 58 If the analog and digital signals are output at the same time set BD DVD ROM 1080 24p Output in Screen Settings to Off page 59 For BD ROMs check the BD DVD ROM 1080 24p Output settings in Screen Settings page 59 Picture noise appears Clean the disc If the picture output from your system goes through your VCR to get to your TV the copy protection signal applied to some BD DVD programs could affect picture quality If you still experience problems even when you connect your unit directly to your TV try connecting your unit to the other input jacks An image is not displayed on the entire TV screen Check the setting of TV Type in Screen Settings page 58 The aspect ratio on the disc is fixed Color irregularity occurs on the TV screen If the speakers are used with a CRT based TV or projector install the speakers at least 0 3 meters from the TV set If the color irregularity persists turn off the TV set once then turn it on after 15 to 30 minutes Make sure that no magnetic object magnetic latch on a TV stand health care device toy etc is placed near the speakers There is no picture after playin
4. AUTO the beginning of the sound may be cut off as the system selects the optimum mode automatically To avoid cutting the sound select other than AUTO Depending on the input stream the sound mode may not be effective When you play a Super Audio CD this function does not work When NIGHT is selected and sound is output from the center speaker this effect is more pronounced as speech movie dialog etc is easy to hear When sound is not output from the center speaker the system optimally adjusts the volume Selecting the Audio Format Multilingual Tracks or Channel When the system is playing a BD DVD VIDEO recorded in multiple audio formats PCM Dolby Digital MPEG audio or DTS or multilingual tracks you can change the audio format or language With a CD you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers Che Press OD repeatedly during playback to select the desired audio signal The audio information appears on the TV screen jueunsn py punos g 4395 446 E BD DVD VIDEO Depending on the BD DVD VIDEO the choice of language varies When 4 digits are displayed they indicate a language code See Language Code List page 76 to confirm which language the code represents When the same language is displayed two or more times the BD DVD VIDEO is recorded in multiple audio formats
5. You can arrange the subwoofer s speaker cord by changing which direction it protrudes from the bottom of the subwoofer Bottom of the subwoofer When packing is opened Speaker cord is connected To avoid short circuiting the speakers make sure that the speaker cord connection is not like the following examples If there is a problem correct it Examples of an improper speaker cord connection Stripped speaker cord is touching Stripped cords are touching each other another speaker terminal due to excessive removal of insulation 1768 payre1s Guna When installing the subwoofer with the wide side facing forward Na Toward the listening position 1 Secure the speaker cord in the speaker cord holder to the right of the speaker terminal ke o 2 a G S 2 D IE E Oo e Speaker cord holder to the right of the speaker terminal Speaker cord 188 When installing the subwoofer with the narrow side facing forward NA Toward the listening position 1 Secure the speaker cord in the speaker cord holder to the left of the speaker terminal payie1s Guna Speaker cord holder to the left of the speaker terminal 1968 D o 2 E S 2 D IE Oo Step 2 Connecting the System For connecting the system read the information on the following pages Do not connect the AC power cord mains lead of the unit to a wall outlet mains until all the other connections are mad
6. 1 Control display Press V9 or for playback operations 2 Playing status bar Status bar cursor indicating the current position playing time duration of the video file 3 Network condition indicator illl Indicates signal strength for a wireless connection z Indicates a wired connection 4 Network transmission speed 5 The next video file name 6 The currently selected video file name Playing files on a Home Network DLNA You can play video music photo files on other DLNA certified components by connecting them to your home network This unit can be used as a player and renderer Server Stores and sends files Player Receives and plays files from the server Renderer Receives and plays files from the server and can be operated by another component controller Controller Operates the renderer component Server a a nal na pad pad ioe len Player Player This system Prepare for using the DLNA function Connect the system to a network page 27 Prepare other DLNA certified components For details see the operating instructions of the components To play files stored on a DLNA server via the system DLNA Player Select the DLNA server icon from FH Video JJ Music or g Photo in the home menu then select the file that you want to play Server Player This system To play remote files by operating the system Render
7. 2568 payie1s Guna Connecting the antenna aerial Rear panel of the unit o o 2 b G S 2 D IE E Oo Oo FM wire antenna aerial supplied Be sure to fully extend the FM wire antenna aerial After connecting the FM wire antenna aerial keep it as horizontal as possible If you have poor FM reception use a 75 ohm coaxial cable not supplied to connect the unit to an outdoor FM antenna aerial 2668 Step 3 Connecting to the Network To connect the system to your network you need to make network settings that suit your usage environment and components For details see Setting up the Network page 53 and Network Settings page 62 Select the method based on your LAN Local Area Network environment Rear panel of the unit 1 ADSL modem l cable modem Broadband router D igi pese d BM USB LAN cable Wireless LAN not supplied Adapter TESI IM LA not supplied p i a I Wired Setup Use a LAN cable to connect to the LAN 100 terminal on the unit USB Wireless Setup Use a wireless LAN via the USB Wireless LAN Adapter Sony UWA BR100 only The USB Wireless LAN Adapter may not be available in some regions countries Asof November 2010 T
8. HDMI IN 1 and HDMI IN 2 do not input sound in the case of an audio format that contains copy protections such as Super Audio CD or DVD Audio For the LPCM 2ch format the supported sampling frequency of the digital signal is up to 96 kHz when using the HDMI1 or HDMI function and 48 kHz when using the TV or SAT CABLE function uoneuuoju jeuonippv i T3 GB 746 Specifications Amplifier Section POWER OUTPUT rated Front L Front R 108 W 108 W at 3 ohms 1 kHz 196 THD POWER OUTPUT reference Front L Front R Center Surround L Surround R Subwoofer Inputs Analog AUDIO AUDIO IN Inputs Digital SAT CABLE COAXIAL 167 W per channel at 3 ohms 1 kHz 165 W at 3 ohms 80 Hz Sensitivity 450 250 mV TV Audio Return Channel OPTICAL Supported formats LPCM 2CH up to 48 kHz Dolby Digital DTS HDMI IN 1 HDMI IN 2 Video Section Outputs Supported formats LPCM 2CH up to 96 kHz Dolby Digital DTS VIDEO 1 Vp p 75 ohms COMPONENT Y 1 Vp p 75 ohms PB PR 0 7 Vp p 75 ohms For non European non Saudi Arabian models only HDMI Section Connector Type A 19pin BD DVD Super Audio CD CD System Signal format system U S and Canada models Other models USB Section USB port LAN Section LAN 100 terminal FM Tuner Section System Tuning range U S and Canada models Other models NTSC NTSC PAL Type A For connecting
9. OPTIONS et PRESET R TUNING 8 A Current station Current band and preset number Station name European and Russian models only 1 Press FUNCTION repeatedly until FM appears in the front panel display 2 Select the radio station Automatic tuning Press and hold TUNING until the auto scanning starts Auto Tuning appears on the T V screen Scanning stops when the system tunes in a station To stop the automatic tuning manually press TUNING or Mi Manual tuning Press TUNING repeatedly 3 Adjust the volume by pressing 21 If an FM program is noisy If an FM program is noisy you can select monaural reception There will be no stereo effect but reception will improve 1 Press OPTIONS The option menu appears on the TV screen 2 Press t to select FM Mode then press 3 3 Press t to select Monaural Stereo Stereo reception Monaural Monaural reception 4 Press The setting is made To turn off the radio Press V0 Presetting radio stations You can preset up to 20 stations Before tuning make sure to turn down the volume to minimum 1 Press FUNCTION repeatedly until FM appears in the front panel display 2 Press and hold TUNING until the auto scanning starts Scanning stops when the system tunes in a station Press OPTIONS The option menu appears on the TV screen Press 1 4 to select Preset Memory then
10. USB memory memory card reader digital still camera and digital video camera 100BASE TX Terminal PLL quartz locked digital synthesizer 87 5 MHz 108 0 MHz 100 kHz step 87 5 MHz 108 0 MHz 50 kHz step Antenna aerial FM wire antenna aerial Antenna aerial terminals 75 ohms unbalanced Speakers Front Surround SS TSB106 for BDV E380 Surround SS TSB106 for BDV E880 96 mm x 245 mm x 96 mm w h d 0 6 kg Front SS TSB108 for BDV E980 BDV E880 96 mm x 775 mm x 72 mm w h d wall mounted part 275 mm x 1 205 mm x 245 mm w h d whole speaker 1 4 kg wall mounted part 2 9 kg whole speaker Surround SS TSB109 for BDV E980 96 mm x 775 mm x 72 mm w h d wall mounted part 275 mm x 1 205 mm x 245 mm w h d whole speaker 1 3 kg wall mounted part 2 8 kg whole speaker Dimensions approx Mass approx Dimensions approx Mass approx Dimensions approx Mass approx Center SS CTB103 Dimensions approx 315 mm x 59 mm x 53 mm w h d Mass approx 0 4 kg Subwoofer SS WSB104 for BDV E880 BDV E380 Dimensions approx 380 mm x 330 mm x 191 mm w h d Mass approx 6 3 kg Subwoofer SS WSB105 for BDV E980 415 mm x 340 mm x 215 mm w h d 7 8kg Dimensions approx Mass approx General Power requirements Taiwan models 120 V AC 50 60 Hz Other models 220 V 240 V AC 50 60 Hz Power consumption On 165 W Standby 0 3 W at
11. or nausea while watching 3D video images Sony recommends that all viewers take regular breaks while watching 3D video images The length and frequency of necessary breaks will vary from person to person You must decide what works best If you experience any discomfort you should stop watching the 3D video images until the discomfort ends consult a doctor if you believe necessary You should also review i the instruction manual and or the caution message of any other device used with or Blu ray Disc contents played with this product and ii our website http esupport sony com for the latest information The vision of young children especially those under six years old is still under development Consult your doctor such as a pediatrician or eye doctor before allowing young children to watch 3D video images Adults should supervise young children to ensure they follow the recommendations listed above Copy Protection Please be advised of the advanced content protection systems used in both Blu ray Disc and DVD media These systems called AACS Advanced Access Content System and CSS Content Scramble System may contain some restrictions on playback analog output and other similar features The operation of this product and the restrictions placed may vary depending on the date of purchase as the governing board of the AACS may adopt or change its restriction rules after the time of purchase Copyr
12. 3055 Step 6 Enjoying Surround Sound After performing the previous Steps and starting playback you can easily enjoy surround sound You can also select pre programmed surround settings that are tailored to different kinds of sound sources They bring the exciting and powerful sound of movie theaters into your home ED AAS lt gt e OPTIONS Selecting surround settings based on your listening preference The setting method differs depending on the function When playing via the BD DVD or FM function 1 Press OPTIONS The option menu appears on the TV screen Press 1 4 to select Surround Setting then press 3 Press 1 4 repeatedly until the surround setting you want appears on the TV screen See the table below for surround sound setting descriptions Press The setting is made Surround sound settings do not apply to Internet content When playing via the HDMI1 HDMI2 TV SAT CABLE or AUDIO function 1 Press OPTIONS The option menu appears in the front panel display 2 Press 44 repeatedly until SUR SET appears in the front panel display then press or gt 3 Press AW repeatedly until the surround setting you want appears in the front panel display See the table below for surround sound setting descriptions 4 Press The setting is made 3168 Q E Q 7 mt D gt Q 5 Press OPTIONS The option menu in the front panel dis
13. DVD ROM DVD R DVD RW DVD R DVD RW CD CD DA Music CD CD ROM CD R CD RW Super Audio CD Blu ray Disc DVD DSince the Blu ray Disc specifications are new and evolving some discs may not be playable depending on the disc type and the version Also the audio output differs depending on the source connected output jack and selected audio settings 2BD RE Ver 2 1 BD R Ver 1 1 1 2 1 3 including organic pigment type BD R LTH type BD Rs recorded on a PC cannot be played if postscripts are recordable A CD or DVD disc will not play if it has not been correctly finalized For more information refer to the operating instructions supplied with the recording device Discs that cannot be played BDs with cartridge BDXLs DVD RAMs HD DVDs DVD Audio discs PHOTO CDs Data part of CD Extras Super VCDs Audio material side on DualDiscs Notes on discs This product is designed to play back discs that conform to the Compact Disc CD standard DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc CD standard Therefore these discs may not be compatible with this product Note on playback operations of a BD DVD Some playback operations of a BD DVD may be intentionally set by software producers Since this system plays a BD DVD according to the disc contents the software producers designed some playback features may not be avail
14. HDVD VR The types of sound tracks recorded on a disc are displayed Example P Stereo L Stereo Audiol P Stereo Audio2 e P Main P Sub P Main Sub Note P Stereo Audio1 and P Stereo Audio2 do not appear when only one audio stream is recorded on the disc HCD P Stereo The standard stereo sound P 1 L The sound of the left channel monaural P 2 R The sound of the right channel monaural P L R The sound of both the left and right channels output from each individual speaker Enjoying Multiplex Broadcast Sound DUAL MONO You can enjoy multiplex broadcast sound when the system receives or plays a Dolby Digital multiplex broadcast signal Note To receive the Dolby Digital signal you need to connect a TV or other component to the unit with a digital coaxial or optical cord pages 22 24 If your TV is compatible with the Audio Return Channel function pages 22 61 you can receive a Dolby Digital signal via an HDMI cable rzz Press OD repeatedly until the desired signal appears in the front panel display MAIN Sound of the main language will be output SUB Sound of the sub language will be output MAIN SUB Mixed sound of both the main and sub languages will be output Tuner Listening to the Radio You can enjoy radio sound with the system s speakers Number buttons E AND HOKE S gt e
15. Password 61 Pause Mode 59 Play information 35 Playable discs 71 Q Quick Start Mode 62 R RDS 46 Rear panel 13 Region code 71 Registered Media Remote Devices 63 Remote control 14 Renderer Access Control 62 Renderer Set up 62 Reset to Factory Default Settings 63 Resetting 63 S Screen Format 58 Screen Saver 62 Screen Settings 58 SLEEP 50 Slideshow 41 Sound Effect 60 Speaker Settings 49 60 Connection 49 Distance 49 Level 49 Subtitle 60 Super Audio CD Playback Channels 61 Super Audio CD Playback Layer 61 Surround Setting 60 System Information 62 T Test Tone 50 TV Screen Size Setting for 3D 58 TV Type 58 U Update 57 USB 35 WwW WEP 56 WPA2 PSK AES 56 WPA2 PSK TKIP 56 WPA PSK AES 56 WPA PSK TKIP 56 7768 The software of this system may be updated in the future To find out details on any available updates please visit the following URL For customers in Europe http support sony europe com For customers in Taiwan http Awww sony asia com support tw For customers in other countries regions http www sony asia com support Blu ray 32 dna 9 RDS BDN DVD a HOM De E K AD COMPACT I DOLBY EE an cD Hise A E dts n D Java http www sony net 92011 Sony Corporation Printed in Malaysia 4261387 1
16. Press RETURN The system returns to the previous display RD o ND Press 1 to select Test Tone then press Press 1 to select Off then press The test tone signals are not output from the HDMI OUT jack co NI C GI To adjust the volume of all the speakers at one time press a Using the Sleep Timer You can set the system to turn off at a preset time so you can fall asleep listening to music The time can be preset in intervals of 10 minutes Press SLEEP Each time you press SLEEP the minutes display the remaining time in the front panel display changes by 10 minutes When you set the sleep timer the remaining time appears every 5 minutes When the remaining time is less than 2 minutes SLEEP flashes in the front panel display To check the remaining time Press SLEEP once To change the remaining time Press SLEEP repeatedly to select the desired time Deactivating the Buttons on the Unit Child Lock You can deactivate the buttons on the unit except for I for preventing misoperation such as child mischief child lock function Press lil on the unit for more than 5 seconds LOCKED appears in the front panel display The child lock function is activated and the buttons on the unit are locked You can operate the system by using the remote To cancel press M for more than 5 seconds so that UNLOCK appears in the front panel display When you opera
17. Setswana 1093 Corsican 1269 Yiddish 1435 Pashto 1535 Tonga 1097 Czech 1283 Javanese Pushto 1538 Turkish 1103 Welsh 1287 Georgian 1436 Portuguese 1539 Tsonga 1105 Danish 1297 Kazakh 1463 Quechua 1540 Tatar 1109 German 1298 Greenlandic 1481 Rhaeto 1543 Twi 1130 Bhutani 1299 Cambodian Romance 1557 Ukrainian 1142 Greek 1300 Kannada 1482 Kirundi 1564 Urdu 1144 English 1301 Korean 1483 Romanian 1572 Uzbek 1145 Esperanto 1305 Kashmiri 1489 Russian 1581 Vietnamese 1149 Spanish 1307 Kurdish 1491 Kinyarwanda 1587 Volap k 1150 Estonian 1311 Kirghiz 1495 Sanskrit 1613 Wolof 1151 Basque 1313 Latin 1498 Sindhi 1632 Xhosa 1157 Persian 1326 Lingala 1501 Sangho 1665 Yoruba 1165 Finnish 1327 Laothian 1502 Serbo Croatian 1684 Chinese 1166 Fiji 1332 Lithuanian 1503 Singhalese 1697 Zulu 1171 Faroese 1334 Latvian Lettish 1505 Slovak 1174 French 1345 Malagasy 1506 Slovenian 1181 Frisian 1703 Not specified Parental Control Area Code List Code Area Code Area Code Area Code Area 2044 Argentina 2109 Germany 2362 Mexico 2499 Sweden 2047 Australia 2200 Greece 2376 Netherlands 2086 Switzerland 2046 Austria 2219 Hong Kong 2390 New Zealand 2543 Taiwan 2057 Belgium 2248 India 2379 Norway 2528 Thailand 2070 Brazil 2238 Indonesia 2427 Pakistan 2184 United 2090 Chile 2239 Ireland 2424 Philippines Kingdom 2092 China 2254 Italy 2428 Poland 2093 Colombia 2276 Japan 2436 Portugal 2115 Denmark 2304 Korea 2489 Russia 2165 Finland 2333 Luxembourg 2501 Singapore 2174 Fr
18. any For gg Photo Press Operation w Starts pauses play When you press and hold either of these buttons for several seconds the connected iPod iPhone enters sleep mode H Pauses play lt lt or gt gt Fast reverses or forwards laa or BPI Goes to the previous next file When you press and hold either of these buttons the connected iPod iPhone fast reverses or fast forwards DISPLAY Turns the backlight on or extends it for 30 seconds OPTIONS Returns to previous display folder hierarchy TV Selects the previous next item 5 Enters the selected item European Australian Singapore and Thai models only Note The iPod iPhone is charged when connected to the system while the system is turned on When Auto Standby is set to On the system may turn off automatically while you are using an iPod iPhone You cannot transfer songs onto the iPod iPhone from this system Sony cannot accept responsibility in the event that data recorded to iPod iPhone is lost or damaged when using an iPod iPhone connected to this unit This product has been designed specifically to work with iPod iPhone and has been certified to meet Apple performance standards Do not remove the iPod iPhone during operation To avoid data corruption or damage to the iPod iPhone turn the system off when connecting or removing the iPod iPhone yoeqheld E 37 GB 38 The system
19. buda folder will be deleted Enjoying Blu ray 3D You can enjoy Blu ray 3D Discs with the 3D logo Blu ray FD 1 Prepare for Blu ray 3D Disc playback e Connect the system to your 3D compatible TV using a High Speed HDMI cable supplied with Indian Saudi Arabian Singapore Thai Chinese and Taiwan models only Set 3D Output Setting and TV Screen Size Setting for 3D in Screen Settings page 58 2 Insert a Blu ray 3D Disc The operation method differs depending on the disc Refer to the operating instructions supplied with the disc Refer also to the operating instructions of your 3D compatible TV Displaying the play information You can check the playback information etc by pressing DISPLAY The displayed information differs depending on the disc type and system status Example when playing a BD ROM 1112 3 4 D 2 Englsh Dolby Digital Plus 3 41 48 kz 50 42 52 99 59 59 N ki Output resolution Video frequency Title number or name The currently selected audio setting Available functions Pa angle OD audio E subtitle Playback information Displays play mode playing status bar disc type video codec bit rate repeat type elapsed time total playing time Chapter number The currently selected angle Playing from a USB Device You can play video music photo files on the connected USB dev
20. etc or near materials curtains draperies that may block the ventilation slots Do not install the system in a confined space such as a bookshelf or similar unit Do not install the system near heat sources such as radiators air ducts or in a place subject to direct sunlight excessive dust mechanical vibration or shock Do not install the system in an inclined position It is designed to be operated in a horizontal position only Keep the system and discs away from components with strong magnets such as microwave ovens or large loudspeakers Do not place heavy objects on the system On operation Ifthe system is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lenses inside the unit Should this occur the system may not operate properly In this case remove the disc and leave the system turned on for about half an hour until the moisture evaporates When you move the system take out any disc If you do not the disc may be damaged If anything falls into the cabinet unplug the unit and have it checked by qualified personnel before operating it any further On adjusting volume Do not turn up the volume while listening to a section with very low level inputs or no audio signals If you do the speakers may be damaged when a peak level section is suddenly played On cleaning Clean the cabinet panel and controls with a soft cl
21. files in the picture and sound For BGM USB memory as slideshow details see Adjusting the background music BGM delay between the picture and sound page 42 Music Search 3D Output Setting Sets whether or not to output Displays information on the audio CD CD DA based on Gracenote technology 3D video automatically Shuffle Setting iPod iPhone only Sets shuffle playback 3D video from the HDMI IN 1 or HDMI IN 2 jack is output regardless of this amp Photo only setting Items Details Video Settings Picture Quality Mode Slideshow Starts a slideshow Selects the picture settings Slideshow Speed Changes the slideshow speed for different lighting environimsnfs Slideshow Effect Sets the effect when playing a FNR Reduces the random Slideshow noise appearing in the Slideshow BGM Off Turns off the picture function BNR Reduces the My Music from USB Sets mosaic like block noise in the music files registered in the picture Add Slideshow BGM MNR Reduces minor Play from Music CD Sets noise around the picture the tracks on CD DAs outlines mosquito noise music CDs Pause Pauses playback Rotate Left Rotates the photo Top Menu Displays the BD s or DVD s anni otan by 90 degrees Top Menu Menu Popup Menu Displays the BD ROM s Rotate Right cn the photo clockwise Pop
22. only recognizes iPods iPhones that have previously been connected to the system The System Audio Control function does not work while playing video photo files via the iPod iPhone European Australian Singapore and Thai models only When you connect an iPod that is not compatible with the video output function and select H iPod front or B iPod rear in Video or Photo an alert message appears on the TV screen European Australian Singapore and Thai models only The system can recognize up to 3 000 files including folders Playing via a Network Streaming BRAVIA Internet Video BRAVIA Internet Video serves as a gateway delivering selected Internet content and a variety of on demand entertainment straight to your unit Some Internet content requires registration via a PC before it can be played 1 Prepare for BRAVIA Internet Video Connect the system to a network page 27 2 Press to select 7H Video JJ Music or gay Photo 3 Press AW to select an Internet content provider icon then press If the Internet content list has not been retrieved it will be represented by an unacquired icon or a new icon To use the control panel The control panel appears when the video file starts playing The displayed items may differ depending on Internet content providers To display again press DISPLAY 1 2 4
23. press Press t to select the preset number you want then press 3 oo a gt Gc Repeat Steps 2 to 5 to store other stations To change the preset number Select the desired preset number by pressing PRESET then perform the procedure from Step 3 aaun 4505 A600 Selecting the preset station 1 Press FUNCTION repeatedly until FM appears in the front panel display The last received station is tuned in 2 Press PRESET repeatedly to select the preset station The preset number and frequency appear on the TV screen and front panel display Each time you press the button the system tunes in one preset station Youcan select the preset station number directly by pressing the number buttons Using the Radio Data System RDS European and Russian models only What is the Radio Data System The Radio Data System RDS is a broadcasting service that allows radio stations to send additional information along with the regular program signal This tuner offers convenient RDS features such as station name display The station name appears on the TV screen as well Receiving RDS broadcasts Simply select a station from the FM band When you tune in a station that provides RDS services the station name appears in the front panel display fan RDS broadcast is not received the station name may not appear in the front panel display Note RDS may not work properly i
24. replay the current scenes for 10 seconds Briefly fast forwards the current scenes for 15 seconds lt P gt fast slow freeze frame Fast reverse fast forward the disc during playback Each time you press the button the search speed changes Activates slow motion play when pressed for more than one second in pause mode Plays one frame at a time when pressed in 9 pause mode Slow motion and single frame playback are not available for Blu ray 3D Discs P play Starts or re starts playback resume play Activates One Touch Play page 47 when the system is on and set to the BD DVD function Il pause Pauses or re starts playback H stop Stops playback and remembers the stop point resume point The resume point for a title track is the last point you played or the last photo for a photo folder Radio operation buttons See Tuner page 45 PRESET TUNING X muting Turns off the sound temporarily a volume page 45 Adjusts the volume TV a volume Adjusts the TV volume TV D TV input Switches the TV s input source between the TV and other input sources DISPLAY pages 34 38 52 Displays playback and web browsing information on the TV screen Displays the preset radio station frequency etc in the front panel display Displays the stream information decoding status in the front panel display when the function is set to other than BD DVD When the
25. s speaker s This function works only when you set Control for HDMI to On page 61 TV KO on standby page 51 Turns on the TV or sets it to standby mode WO on standby pages 29 45 Turns on the system or sets it to standby mode 2 5 Number buttons pages 46 51 Enters the title chapter numbers preset station number etc CD audio pages 43 44 Selects the audio format track C subtitle page 60 Selects the subtitle language when multilingual subtitles are recorded on a BD ROM DVD VIDEO Color buttons red green yellow blue Short cut keys for selecting items on some BD menus can also be used for Java interactive operations on BDs TOP MENU Opens or closes the BD s or DVD s Top Menu POP UP MENU Opens or closes the BD ROM s Pop up Menu or the DVD s menu OPTIONS pages 31 40 52 Displays the options menu on the TV screen or in the front panel display The location differs based on the selected function RETURN Returns to the previous display San Moves the highlight to a displayed item enter Enters the selected item SOUND MODE page 43 Selects the sound mode HOME pages 29 45 48 49 52 53 57 Enters or exits the system s home menu 6 o Playback operation buttons 8 See Playback page 34 I 4 1 previous next Skip to the previous next chapter track or file e e gt replay advance Briefly
26. security to communications to prevent outsiders from intercepting communications or intruding into your wireless network WEP is a legacy security technology that enables older device which do not support TKIP AES to be connected WPA PSK TKIP WPA2 PSK TKIP TKIP is a security technology developed in response to the deficiencies of WEP TKIP assures a higher security level than WEP WPA PSK AES WPA2 PSK AES AES is a security technology that uses an advanced security method distinct from WEP and TKIP AES assures a higher security level than WEP or TKIP Settings and Adjustments Using the Setup Display You can make various adjustments of items such as picture and sound Select Ss Setup on the home menu when you need to change the settings of the system The default settings are underlined Playback settings stored in the disc take priority over the Setup Display settings and not all the functions described may work 1 Press HOME The home menu appears on the TV screen 2 Press 5 to select 23 Setup Network Update Icon Explanation Audio Settings page 59 Makes the audio settings according to the type of connecting jacks BD DVD Viewing Settings page 60 Makes detailed settings for BD DVD playback Parental Control Settings page 61 Makes detailed settings for the Parental Control function Music Settings page 61 Makes detailed settings f
27. system is set to the HDMII HDMI2 TV or SAT CABLE function the stream information decoding status appears only when a digital signal is input The stream information decoding status may not appear depending on the stream or item being decoded DIMMER page 51 Changes the brightness of the front panel display SLEEP page 50 Sets the sleep timer FUNCTION pages 30 45 Selects the playback source Q favorites Displays the Internet contents added to the Favorites List You can save 18 favorite Internet contents 1568 o o 2 E G S 2 D IE E o 0 Getting Started Step 1 Installing the System How to position the system Install the system by referring to the illustration below A Front speaker L left Front speaker R right Center speaker B Surround speaker L left amp Surround speaker R right Subwoofer Unit Use caution when placing the speakers and or speaker stands attached to the speakers on a specially treated waxed oiled polished etc floor as staining or discoloration may result Do not lean or hang on a speaker as it may fall down To assemble the speakers refer to the supplied Speaker Installation Guide BDV E980 BDV E880 only You can install the speakers on a wall For details refer to the supplied Speaker Installation Guide 1658 About the subwoofer s speaker cord BDV E980 only
28. than BD DVD you can check whether Dolby Pro Logic PRO LOGIC Dolby PL II Movie PLII MOVIE or the DTS Neo 6 mode is activated by pressing DISPLAY repeatedly so that the stream information decoding status appears in the front panel display 338 346 Playback Playing a Disc For playable discs see Playable Discs page 71 1 Switch the input selector on your TV so that the signal from the system appears on your TV screen 2 Press 4 and place a disc on the disc tray 3 Press to close the disc tray Q appears on the home menu and playback starts If playback does not start automatically select in the FH Video JJ Music or KY Photo category and press Enjoying BONUSVIEW BD LIVE Some BD ROMs with BD LIVE Logo have bonus content and other data that can be downloaded for enjoyment BU vg 1 Connect the USB device to the amp USB port on the rear of the unit For local storage use a 1 GB or larger USB memory Rear panel USB memory 2 Prepare for BD LIVE BD LIVE only Connect the system to a network page 27 Set BD Internet Connection to Allow page 60 3 Insert a BD ROM with BONUSVIEW BD LIVE The operation method differs depending on the disc Refer to the operating instructions of the disc To delete data in the USB memory select Erase BD Data in Ed Video and press C All data stored in the
29. the Power Saving mode 430 mm x 75 mm x 320 mm w h d incl projecting parts Dimensions approx Mass approx 4 1kg Design and specifications are subject to change without notice Standby power consumption 0 3W Over 8596 power efficiency of amplifier block is achieved with the full digital amplifier S Master uoneuuoju jeuonippv 7568 Language Code List The language spellings conform to the ISO 639 1988 E F standard Code Language Code Language Code Language Code Language 1027 Afar 1183 Irish 1347 Maori 1507 Samoan 1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona 1032 Afrikaans 1194 Galician 1350 Malayalam 1509 Somali 1039 Amharic 1196 Guarani 1352 Mongolian 1511 Albanian 1044 Arabic 1203 Gujarati 1353 Moldavian 1512 Serbian 1045 Assamese 1209 Hausa 1356 Marathi 1513 Siswati 1051 Aymara 1217 Hindi 1357 Malay 1514 Sesotho 1052 Azerbaijani 1226 Croatian 1358 Maltese 1515 Sundanese 1053 Bashkir 1229 Hungarian 1363 Burmese 1516 Swedish 1057 Byelorussian 1233 Armenian 1365 Nauru 1517 Swahili 1059 Bulgarian 1235 Interlingua 1369 Nepali 1521 Tamil 1060 Bihari 1239 Interlingue 1376 Dutch 1525 Telugu 1061 Bislama 1245 Inupiak 1379 Norwegian 1527 Tajik 1066 Bengali 1248 Indonesian 1393 Occitan 1528 Thai Bangla 1253 Icelandic 1403 Afan Oromo 1529 Tigrinya 1067 Tibetan 1254 Italian 1408 Oriya 1531 Turkmen 1070 Breton 1257 Hebrew 1417 Punjabi 1532 Tagalog 1079 Catalan 1261 Japanese 1428 Polish 1534
30. the image of the system on your TV and listen to TV sound via the system s speakers Depending on the jacks and functions on your TV select the connection method e When your TV has an HDMI jack that is marked ARC Connection e When your TV has an HDMI jack Connections and D When your TV has component video input jacks for non European non Saudi Arabian models Connections and D When your TV does not have jacks above Connections and D Video connections Audio connection go e i HDMI cable Component Video cord Digital optical cord video cable not supplied not supplied Image quality TV f VDEON mi p E Yellow Signal flow Video signal t Audio signal Yellow Rear panel of the unit a n D Audio Return Channel For details see About Audio Return Channel page 23 2The High Speed HDMI cable is supplied with Indian Saudi Arabian Singapore Thai Chinese and Taiwan models only 228 The video cord is supplied with Russian Saudi Arabian and Taiwan models only 4 Available only when your TV is compatible with the Audio Return Channel function HDMI cable connection If your TV has an HDMI jack connect to the TV with an HDMI cable This will provide better image quality compared to other t
31. 720p 1080i video signals from the COMPONENT VIDEO OUT jacks COMPONENT VIDEO OUT jacks are equipped on non European non Saudi Arabian models Rear panel NE Ia fe a N bi SPEAKERS jacks page 20 COMPONENT VIDEO OUT jacks page 22 for non European non Saudi Arabian models lt USB port page 35 SAT CABLE DIGITAL IN COAXIAL jack page 24 ANTENNA FM COAXIAL 750 jack page 26 A CAL MIC jack pages 29 48 AUDIO AUDIO IN L R jacks page 24 10 11 13 TV DIGITAL IN OPTICAL jack page 22 LAN 100 terminal page 27 HDMI IN 2 jack page 24 HDMI IN 1 jack page 24 HDMI OUT jack page 22 VIDEO OUT jack page 22 1368 146 Number 5 JJ a and B buttons have a Remote control BOUND MODE Que SOUND MODE PRESET PRESET i e E e TUNING TUNING G9 C e Bi tactile dot Use the tactile dot as a reference when operating the remote For TV operations For details see Controlling Your TV with the Supplied Remote page 51 1 4 open close Opens or closes the disc tray SPEAKERS TVH AUDIO Selects whether T V sound is output from the system s speakers or the TV
32. IN 1 jack TV The sound of the component that is connected to the HDMI IN 1 jack is input from the TV DIGITAL IN OPTICAL jack E Quick Start Mode On Shortens the startup time from standby mode You can operate the system quickly after turning it on Off The default setting W Auto Standby On Turns on the Auto Standby function When you do not operate the system for about 30 minutes the system enters standby mode automatically Off Turns off the function E Auto Display On Automatically displays information on the screen when changing the viewing titles picture modes audio signals etc Off Displays information only when you press DISPLAY E Screen Saver On Turns on the screen saver function Off Off W Software Update Notification On Sets the system to inform you of newer software version information page 57 Off Off E Gracenote Settings Auto Automatically downloads disc information when you stop playback of the disc To download the system must be connected to the network Manual Downloads disc information when Video Search or Music Search is selected E System Information You can display the system s software version information and the MAC address amp Network Settings You can make detailed settings for Internet and network W Internet Settings Connect the system to the network beforehand For de
33. L SYNLIG OG USYNLIG LASERSTRALING I KLASSE 3R NAR DEKSEL APNES UNNGA DIREKTE EKSPONERING AV YNENE VARNING KLASS 3R SYNLIG OCH OSYNLIG LASERSTRALNING N R DENNA DEL R PPNAD UNDVIK ATT DIREKT EXPONERA GONEN F R STR LNINGEN VARO AVATTUNA LUOKAN 3R N KYV JA N KYM T NT LASERSATEILYA V LT KATSEEN SUORAA ALTISTAMISTA Lea ea EOE iS Sa a a ERRR This appliance is classified as a CLASS 3R LASER product Visible and invisible laser radiation is emitted when the laser protective housing is opened so be sure to avoid direct eye exposure This marking is located on the laser protective housing inside the enclosure CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT 125 BC dh This appliance is classified as a CLASS 1 LASER product This marking is located on the rear exterior For the customers in Europe Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropria
34. Select this when connecting to a device with an HDCP compliant DVI jack E HDMI Deep Colour Output Auto Normally select this 16bit 12bit 10bit Outputs 16bit 12bit 10bit video signals when the connected TV is compatible with Deep Colour Off Select this when the picture is unstable or colors appear unnatural E Pause Mode BD DVD VIDEO DVD R DVD RW only Auto The picture including subjects that move dynamically is output with no jitter Normally select this position Frame The picture including subjects that do not move dynamically is output in high resolution 4 Audio Settings E BD Audio MIX Setting On Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio Off Outputs the primary audio only E Audio DRC You can compress the dynamic range of the sound track Auto Performs playback at the dynamic range specified by the disc BD ROM only On The system reproduces the sound track with the kind of dynamic range that the recording engineer intended Off No compression of dynamic range E Attenuate AUDIO Distortion may occur when you listen to a component connected to the AUDIO AUDIO IN L R jacks You can prevent distortion by reducing the input level on the unit On Attenuates the input level The output level is changed Off Normal input level B Audio Output You can select
35. TV input to the video input appears on the TV screen Switch the input selector on your TV so that the signal from the iPod iPhone appears on your TV screen Then start the slideshow by operating the iPod iPhone directly European Australian Singapore and Thai models only 5 Press 2 and to select the file that you want to play The sound from the iPod iPhone is played on the system When you play a video file switch the input selector on your TV so that the signal from the iPod iPhone appears on your TV screen European Australian Singapore and Thai models only You can operate the iPod iPhone using the buttons on the remote For operation details refer to the operating instructions of the iPod iPhone To change a system setting such as the surround setting while viewing images from your iPod iPhone on your TV select the input on your TV for this system before operating the system European Australian Singapore and Thai models only To operate the iPod iPhone using the remote You can operate the iPod iPhone using the buttons on the remote The following table shows an example of buttons that can be used Depending on the iPod iPhone model the operation may be different For FH Video J7 Music Press Operation gt Starts play H Pauses play H Stops play lt lt or gt gt Fast reverses or forwards I 4 or BPI Goes to the previous next file or chapter if
36. V with the Supplied Remote ener 51 Changing the Brightness of the Front Panel Display 51 Saving Power in Standby Mode 51 Browsing WebsitesS 52 Setting up the Network 53 Settings and Adjustments Using the Setup Display Network Update EN Screen Settingsl Audio Settingslj BD DVD Viewing Settings 60 Parental Control Settings 61 Music Settingsl System Settings Network Settings D Easy Setup esses Resetting a eres Additional Information PRECAUTIONS sen nn tre 64 Notes about the Discs Troubleshooting Playable Discs zs d Playable Types of Files 72 Supported Audio FOormats 73 Specifications aa 74 Language Code List 76 Index lee ette TI Unpacking BDV E980 Front speakers 2 Surround speakers 2 Center speaker 1 Subwoofer 1 e Speaker cords 5 red white FM wire antenna aerial 1 green gray blue pre or emp Video cord 1 Russian model only Speaker bottom covers 4 OOH KO c Remote comma
37. able Note about double layer BDs DVDs The playback picture and sound may be momentarily interrupted when the layers switch Region code BD ROM DVD VIDEO only Your system has a region code printed on the rear of the unit and will only play a BD ROM DVD VIDEO playback only labeled with identical region codes or 8 uoneuvojuj jeuonippv i 1168 7268 Playable Types of Files Video File format Extensions MPEG 1 Video PS MPEG 2 Video PS TS mpg mpeg mts mts 6 au Xvid avi MPEG4 AVC2 mkv mp4 m4v m2ts mts WMV925 wmv asf AVCHD 35 Music File format Extensions MP3 MPEG 1 Audio mp3 Layer III AAC24 9 mda WMAO Standard wma LPCM wav Photo File format Extensions JPEG jpg jpeg GIF gif PNG png DThe system does not play these files via the renderer function 2 The system does not play files encoded with DRM The system plays AVCHD format files that are recorded via a digital video camera etc To watch AVCHD format files the disc with AVCHD format files on it must be finalized The system does not play files encoded with Lossless etc The system does not play these files via the DLNA function The system plays SD resolution only via the DLNA function Some files may not play depending on the
38. age display left up down or right Available options Various settings and operations are available by pressing OPTIONS The available items differ depending on the situation Items Details Browser Setup Displays the Internet Browser settings Zoom Increases or decreases the size of the displayed contents JavaScript Setup Sets whether to enable or disable JavaScript Cookie Setup Sets whether or not to accept browser cookies SSL Alarm Display Sets whether to enable or disable SSL 1 2 3 14 15 http s w 3001300 6 7 8 Input Displays the software keyboard to enter characters while browsing a website Break Moves the cursor to the next line in the text input field Items Details Delete Erases one character on the left side of the cursor during text input Window List Displays a list of all currently opened websites Allows you to return to a previously displayed website by selecting the window Bookmark List Displays the bookmark list Character encoding Sets the character code Previous page Moves to a previously displayed page Next page Moves to the previously displayed next page Cancel loading Stops loading a page Reload Reloads the same page URL entry Allows you to enter a URL when the software keyboard is displayed Add to Bookmark Adds the currently displayed w
39. ance 2363 Malaysia 2149 Spain 16598 Index Numerics 3D 34 3D Output Setting 58 A A V SYNC 42 Attenuate AUDIO 59 Audio 60 Audio DRC 59 Audio Output 59 Audio Return Channel 61 Audio Settings 59 Auto Calibration 48 60 Auto Display 62 Auto Standby 62 BD Audio MIX Setting 59 BD Hybrid Disc Playback Layer 60 BD Internet Connection 60 BD Parental Control 61 BD DVD Menu 60 BD DVD Viewing Settings 60 BD DVD ROM 1080 24p Output 59 BD LIVE 34 BONUSVIEW 34 BRAVIA Internet Video 38 BRAVIA Sync 47 C CD 71 Child Lock 50 Cinema Conversion Mode 58 Connection Server Settings 62 Control for HDMI 47 61 D D C A C Digital Cinema Auto Calibration 48 DLNA 38 62 Dolby Digital 43 DTS 43 DVD 71 DVD Aspect Ratio 58 DVD Parental Control 61 E Easy Setup 29 63 F FM Mode 45 Front panel 11 Front panel display 12 G Gracenote Settings 62 H HDMI YCbCr RGB HDMI 59 HDMI Deep Colour Output 59 Illumination Display 61 Initialize Personal Information 63 Internet content 38 Internet Settings 53 62 Internet Video Parental Control 61 Internet Video Unrated 61 L Language Code List 76 Media Remote Device Registration 63 Multiplex broadcast sound 44 Music Settings 61 N Network Connection Diagnostics 62 Network Settings 62 Network Update 57 O OSD 61 Output Video Format 58 P Parental Control Area Code 61 Parental Control Settings 61 Party Auto Start 63
40. and press C2 the system sets the DNS setting automatically When you select Specify IP address and press G enter the DNS settings manually Press 4 and the number buttons to set the following items then press Primary DNS Secondary DNS Specify IP address Enter the network settings manually according to your network environment Press amp 3 and the number buttons to set the following items then press IP Address Subnet Mask Default Gateway Primary DNS Secondary DNS 4 Press 14 to select the proxy server setting then press No A proxy server is not used Yes Enter the proxy server setting Press A W 9 and the number buttons then press 3 The value of the internet settings appears on the TV screen Press gt eg Press t to select Save amp Connect then press The system starts checking the network connection 7 Check that the message Internet Settings is now complete appears then press G The setup is finished If the message does not appear follow the on screen messages When connecting to the wireless LAN with the USB Wireless LAN Adapter Follow the Steps below for connecting to a wireless LAN Local Area Network When your wireless router is compatible with the WPS function 1 Press 1 4 to select USB Wireless Setup on the Internet Settings display then press 3 2 Press 4 4 to sel
41. are trademarks of Panasonic Corporation and Sony Corporation e XMB and xross media bar are trademarks of Sony Corporation and Sony Computer Entertainment Inc PLAYSTATION is a trademark of Sony Computer Entertainment Inc Music and video recognition technology and related data are provided by Gracenote Gracenote is the industry standard in music recognition technology and related content delivery For more information please visit www gracenote com 368 CD DVD Blu ray Disc and music and video related data from Gracenote Inc copyright O 2000 present Gracenote Gracenote Software copyright 2000 present Gracenote One or more patents owned by Gracenote apply to this product and service See the Gracenote website for a nonexhaustive list of applicable Gracenote patents Gracenote CDDB MusicID Media VOCS the Gracenote logo and logotype and the Powered by Gracenote logo are either registered trademarks or trademarks of Gracenote in the United States and or other countries C d gracenote The Wi Fi CERTIFIED Logo is a certification mark of the Wi Fi Alliance The Wi Fi Protected Setup Mark is a mark of the Wi Fi Alliance Wi Fi CERTIFIED and Wi Fi Protected Setup are trademarks of the Wi Fi Alliance PhotoTV HD and the PhotoTV HD logo are trademarks of Sony Corporation MPEG Layer 3 audio coding technology and patents licensed from F
42. at ear level using a tripod etc not supplied The front of each speaker should face the calibration mic and there should be no obstruction between the speakers and the calibration mic Press I A oo Switch the input selector on your TV so that the signal from the system appears on the TV screen The Easy Setup Display for OSD language selection appears TS Easy Setup OSD Select the language to be displayed by this unit English Deutsch Fran ais Italiano Espa ol 5 Perform the Easy Setup Follow the on screen instructions to make the basic settings using 1 4 gt and Depending on the connection method page 22 perform the following setting HDMI cable connection Follow the instructions that are displayed on the TV screen Component video cable connection for non European non Saudi Arabian models Select the picture quality The available settings are as follows from lowest to highest picture quality 480i 576i 480p 576p 720p and 10801 Note BD ROM playback of protected content via component video output is only supported at 480i 576i output resolution For details see Copy Protection page 3 Video cord connection Select 16 9 or 4 3 so that the picture is displayed correctly For details about Auto Calibration settings in Easy Setup see Calibrating the Appropriate Settings Automatically page 48 To recall the Easy Setup Display Pre
43. ation iPod touch Ist generation iPhone 4 iPhone 3GS iPhone 3G iPhone To enjoy an iPod iPhone via the system 1 For European Australian Singapore and Thai models Connect the Dock for iPod iPhone supplied to the front or rear amp USB port on the unit then place the iPod iPhone onto the Dock for iPod iPhone When you play a video photo file connect the video out jack of the Dock for iPod iPhone to the video input jack of your TV with a video cord supplied before placing the iPod iPhone onto the Dock for iPod iPhone Front panel TV a Rear panel Dock for iPod iPhone Video cord supplied For other models Connect the iPod iPhone to the lt USB port on the unit with the iPod iPhone s USB cable Rear panel USB cable that is connected to the iPod iPhone Front panel USB cable that is connected to the iPod iPhone 2 Press HOME The home menu appears on the TV screen 3 Press 5 to select Hj Video JJ Music or fy Photo European Australian Singapore and Thai models only 4 Press 4 4 to select iPod front or B iPod rear then press E If you selected Video or Music in Step 3 The video music files are listed on the TV screen Go to the next Step E if you selected Photo in Step 3 Please change the
44. e To assemble the speakers refer to the supplied Speaker Installation Guide BDV E980 BDV E880 only When you connect another component with a volume control turn down the volume of the other components to a level where sound is not distorted Connecting the speakers To connect speaker cords to the speaker You need to connect a speaker cord to each of the front center and surround speakers The connector of the speaker cords and the color tube are color coded based on the speaker type Be sure to match the speaker cords to the appropriate terminals on the speakers the speaker cord with the color tube to and the speaker cord without the color tube to Do not catch the speaker cord insulation rubber covering in the speaker terminals Rear or bottom of the speaker Color tube Connector 2068 To connect speaker cords to the unit Connect the speaker cords to match the color of the SPEAKERS jacks of the unit When connecting to the unit insert the connector until it clicks White Front left speaker L Purple Red Subwoofer Front right speaker R Green Center speaker Rear panel of the unit ri n pe e SIL 3 i 3 E Blue Surround left speaker L Gray Surround right speaker R ies Mi 2168 paye Guna o o 2 E G S 2 D JE E o Oo Connecting the TV Connect the system to your TV to display
45. e Speakers page 49 E Auto Calibration You can calibrate the appropriate settings automatically For details see Calibrating the Appropriate Settings Automatically page 48 BD DVD Viewing Settings You can make detailed settings for BD DVD playback E BD DVD Menu You can select the default menu language for BD ROMS or DVD VIDEOs When you select Select Language Code the display for entering the language code appears Enter the code for your language by referring to Language Code List page 76 E Audio You can select the default track language for BD ROMs or DVD VIDEOs When you select Original the language given priority in the disc is selected When you select Select Language Code the display for entering the language code appears Enter the code for your language by referring to Language Code List page 76 E Subtitle You can select the default subtitle language for BD ROMs or DVD VIDEOs When you select Select Language Code the display for entering the language code appears Enter the code for your language by referring to Language Code List page 76 E BD Hybrid Disc Playback Layer BD Plays BD layer DVD CD Plays DVD or CD layer E BD Internet Connection Allow Normally select this Do not allow Prohibits Internet connection 4 Parental Control Settings E Password Set or change the password for the Parental Contr
46. e area The default setting is underlined 568 668 Table of Contents About These Operating Instructions 5 Unpacking en Index to Parts and Controls Getting Started Step 1 Installing the System 16 Step 2 Connecting the System 20 Step 3 Connecting to the Network esses 27 Step 4 Performing the Easy Setup onere 29 Step 5 Selecting the Source 30 Step 6 Enjoying Surround Sound sss 31 Playback Playing Disc reme 34 Playing from a USB Device 35 Enjoying an iPod iPhone 36 Playing via a Network 38 Available Options 40 Sound Adjustment Selecting the Effect to Suit the Sou rce ertet 43 Selecting the Audio Format Multilingual Tracks or Channel 43 Enjoying Multiplex Broadcast Sound deti eei 44 Tuner Listening to the Radio 45 Using the Radio Data System RDS eros ture el ah le ele 46 Other Operations Using the Control for HDMI Function for BRAVIA Sync e 47 Calibrating the Appropriate Settings Automatically 48 Setting the Speakers 49 Using the Sleep Timer 50 Deactivating the Buttons on the Unit ee RU 50 Controlling Your T
47. e the PARTY press HOME To use the system as PARTY guest Select 4524 Party in JJ Music then select the PARTY host device icon To leave the PARTY press OPTIONS then select Leave Party To close the PARTY press OPTIONS then select Close Party yoeqheld E 39565 40e The sale and product lineup of products that are compatible with the PARTY STREAMING function differ depending on the area Searching for video music information You can acquire content information using Gracenote technology and search for related information 1 Connect the system to a network page 27 2 Insert a disc with content about which you want to search You can perform a video search from a BD ROM or DVD ROM and a music search from a CD DA music CD 3 Press 5 to select Hj Video or JJ Music 4 Press V to select amp Video Search or Music Search The content information is displayed Evi Search Mary Cruz y Nature e fe mary cruz Nature 2 of amp Mary Cruz IH Video Nature 3 1 A Cast Mary Cruz J Nature 4 2 x A Mary Cruz D Playback History A Nature 5 3 Q Search History ba amp Mary Cruz 1 Content details Displays a list of related information such as title cast track or artist 2 Playback History Displays a list of previously played BD ROM DVD ROM CD DA music CD titles Select a title to acquire content infor
48. ebsite to the bookmark list Set as start page Sets the currently displayed website as the default start page Open in new window Opens a link in a new window Display certificate Displays server certificates sent from pages that support SSL Setting up the Network Internet Settings Before setting connect the system to the network For details see Step 3 Connecting to the Network page 27 To open the setting display 1 Press HOME HOME as The home menu appears on the TV screen 2 Press 2 to select 523 Setup BS H Setup A seen sonos Fay Audio Settings BD DVD Viewing Settings Eh Parental Control Settings 3 Press 4 4 to select Network Settings then press Internet Settings hec setings Network Connection Diagnostics Connection Server Settings Renderer Options suoneglodo J410 l 53 GB 5468 Press 1 to select Internet Settings then press The Internet Settings display appears BB Internet Settings Internet Settings allows you to access content on your home network and the Internet Please select a choice below View Network Status Wired Setup USB Wireless Setup The Internet Settings items are necessary to connect to the Internet Enter the respective alphanumeric values for your broadband router or Wireless LAN router The items that need to be set may differ depending
49. ect Wi Fi Protected Setup WPS then press 3 Activate the WPS function of your wireless router press t V to select Start then press For details about activating the WPS function see the operating instructions of your router 4 Check that the message Wi Fi Protected Setup was successful appears then press gt Setup of wireless LAN connectivity and the IP address is finished Next enter the proxy server setting Follow Steps 4 to 7 of Manual setting in When connecting to the LAN with a LAN cable above When your wireless router is not compatible with the WPS function 1 Press 1 4 to select USB Wireless Setup on the Internet Settings display then press 3 2 Press t to select Scan then press Q The system searches for available wireless LANS then the list of wireless LANs appears 3 Press 4 4 to select the wireless LAN name then press 3 E When the selected wireless LAN is unsecured Setup of wireless LAN connectivity is finished Next enter the IP address settings by following the Steps of Auto setting or Manual setting in When connecting to the LAN with a LAN cable above E When the selected wireless LAN is secured The display for entering a WEP or WPA key appears Go to Step 5 E To specify the wireless LAN name Select Manual Entry The input display appears Enter the wireless LAN name by following the on screen messages then press 3 suonelod
50. ed for connecting a USB device Power indicator Lights up while the system is turned on Disc tray page 34 I5 on standby Remote sensor Turns on the unit or sets it to standby mode About soft touch buttons indicators These buttons function when the soft touch button indicators are lit You can turn on off the indicators by setting Illumination Display page 61 When you set Illumination Display to Simple Off the indicators turn off In this case touch any soft touch button When the indicators light up touch the desired button These buttons work when you touch them lightly Do not press on them with excessive force 1168 1268 Front panel display About the indications in the front panel display e NE a Displays the system s playing status Lights up when repeat play is activated Lights up when stereo sound is received Radio only Lights up when the system is playing via the PARTY STREAMING function Lights up when the HDMI OUT jack is correctiy connected to an HDCP High bandwidth Digital Content Protection compliant device with HDMI or DVI Digital Visual Interface input 6 7 8 Lights up when muting is on Displays the system s status such as radio frequency etc Lights up when outputting 720p 1080i 1080p video signals from the HDMI OUT jack or
51. electronic equipment For all other batteries please view the section on how to remove the battery from the product safely Hand the battery over to the applicable collection point for the recycling of waste batteries For more detailed information about recycling of this product or battery please contact your local Civic Office your household waste Europe Only disposal service or the shop where you purchased the product Notice for customers the following information is only applicable to equipment sold in countries applying EU directives The manufacturer of this product is Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japan The Authorized Representative for EMC and product safety is Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Germany For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents The nameplate is located on the bottom exterior Precautions On power sources The unit is not disconnected from the mains as long as it is connected to the AC outlet even if the unit itself has been turned off As the main plug is used to disconnect the unit from the mains connect the unit to an easily accessible AC outlet Should you notice an abnormality in the unit disconnect the main plug from the AC outlet immediately On watching 3D video images Some people may experience discomfort such as eye strain fatigue
52. er via a DLNA controller You can operate the system with a DLNA certified controller such as iPhone when playing files stored on a DLNA server Server Renderer This system Controller Control this system using a DLNA controller For details of operation see the operating instructions of the DLNA controller Do not operate the system with the supplied remote and a DLNA controller at the same time For details about the DLNA controller refer to the operating instructions of the DLNA controller The system is compatible with the Play To function of Windows Media Player 12 that comes standard with Windows 7 Playing the same music in different rooms PARTY STREAMING You can play the same music at the same time across all Sony components which are compatible with the PARTY STREAMING function and connected to your home network There are two kinds of PARTY STREAMING compatible components PARTY host Sends and plays files PARTY guest Receives and plays files This unit can be used as a PARTY host or PARTY guest PARTY host This system nap PN e ERIT PARTY guest PARTY guest Prepare for PARTY STREAMING Connect the system to a network page 27 Connect components which are compatible with the PARTY STREAMING function To use the system as PARTY host Select a track in JJ Music then select Start Party from the options menu to start a PARTY To clos
53. er Off You can turn the system off in sync with the TV The system does not turn off automatically while playing music or when set to the FM function One Touch Play When you press B on the remote the system and your TV turn on and your TV s input is set to the HDMI input to which the system is connected System Audio Control You can simplify operation to enjoy sound from the TV or other components You can use the System Audio Control function as follows When the system is turned on the sound of the TV or other components can be output from the speakers of the system When sound from the TV or other components is output via the speakers of the system you can change the speakers to which TV sound is output by pressing SPEAKERS TV AUDIO When sound from the TV or other components is output via the speakers of the system you can adjust the volume and turn off the sound of the system by operating the TV Note While the TV is in PAP picture and picture mode or the system is playing video photo files from the iPod iPhone the System Audio Control function will not work Depending on the TV when you adjust the unit s volume the volume level appears on the TV screen In this case the volume level that appears on the TV screen and the unit s front panel display may differ Audio Return Channel You can enjoy TV sound via the system by using just one HDMI cable For details of the setting
54. est possible surround sound set connection of the speakers and their distance from your listening position Then use the test tone to adjust the level and the balance of the speakers to the same level 1 Press HOME The home menu appears on the TV screen Press 9 to select 523 Setup then press 3 Press 1 4 to select Speaker Settings then press The Speaker Settings display appears 3 Press to select Audio Settings 5 Press AW to select the item then press e Check the following settings E Connection If you do not connect center or surround speakers set the parameters for Center and Surround Since the front speaker and subwoofer settings are fixed you cannot change them Front Yes Centre Yes Normally select this None Select this if no center speaker is used Surround Yes Normally select this None Select this if no surround speaker is used Subwoofer Yes E Distance When you move the speakers be sure to set the parameters of the distance Q from the listening position to the speakers You can set the parameters from 0 0 to 7 0 meters The speakers in the illustration correspond to the following Center speaker Front left speaker L Front right speaker R Subwoofer Surround left speaker L Surround right speaker R Front Left Right 3 0 m Set the f
55. f the station you are tuned to is not transmitting the RDS signal properly or if the signal strength is weak Not all FM stations provide RDS service nor do they provide the same type of services If you are not familiar with the RDS system check with your local radio stations for details on RDS services in your area While receiving an RDS broadcast each time you press DISPLAY the display in the front panel display changes as follows Station name Frequency Preset number Stream information Decoding status Station name Does not appear depending on the setting of Surround Setting Other Operations Using the Control for HDMI Function for BRAVIA Sync This function is available on TVs with the BRAVIA Sync function By connecting Sony components that are compatible with the Control for HDMI function via an HDMI cable operation is simplified Some functions can only be used if the connected TV is compatible and require prior setting via the TV Refer to the operating instructions of the TV To use the System Audio Control function you need to make an audio connection between the system and TV page 22 Using BRAVIA Sync Control for HDMI Easy Setting You can set the system s Control for HDMI function automatically by enabling the corresponding setting on the TV For details about the Control for HDMI function see HDMI Settings page 61 System Pow
56. file format the file encoding the recording condition or DLNA server condition Some files edited on a PC may not play The system can recognize the following files or folders in BDs DVDs CDs and USB devices up to folders in the 3rd tree up to 500 files in a single tree The system can recognize the following files or folders stored in the DLNA server up to folders in the 18th tree up to 999 files in a single tree Some USB devices may not work with this system The system can recognize Mass Storage Class MSC devices such as flash memory or an HDD Still Image Capture Devices SICDs and 101 key keyboards front amp USB port only To avoid data corruption or damage to USB memory or other devices turn the system off before connecting or removing USB memory or other devices The system may not play high bit rate video files from a DATA CD smoothly It is recommended to play high bit rate video files using a DATA DVD Supported Audio Formats Audio formats supported by this system are as follows Format LPCM 2ch LPCM5 1ch Dolby Digital Dolby DTS DTS ES DTS HD DTS HD Function LPCM 7 1ch TrueHD Discrete 6 1 High Master Dolby Digital DTS ES Resolution Audio Plus Matrix 6 1 Audio DTS96 24 BD DVD O oO O O O O O O HDMN O O o HDMI2 SAT CABLE O O O Ty DIGITAL IN O Supported format Unsupported format
57. g a video photo file on the iPod iPhone European Australian Singapore and Thai models only Select the input on your TV for this system uoneuuojuj jeuonippv i 67 GB 688 Sound Symptom Problems and solutions There is no sound The speaker cord is not connected securely Check the speaker settings page 49 The Super Audio CD sound of a component that is connected to the HDMI IN 1 or HDMI IN 2 jack is not output HDMI IN 1 and HDMI IN 2 does not accept an audio format that contains copy protection Connect the analog audio output of the component to the AUDIO AUDIO IN L R jacks of the unit There is no sound from the TV via the HDMI OUT jack when using the Audio Return Channel function Set Control for HDMI in HDMI Settings of System Settings to On page 61 Also set Audio Return Channel in HDMI Settings of System Settings to Auto page 61 Make sure that your TV is compatible with the Audio Return Channel function Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function The system does not output sound correctly when connected to a set top box Set Audio Return Channel in HDMI Settings of System Settings to Off page 61 Severe hum or noise is heard Move your TV away from the audio components Clean the disc The sound loses stereo effect when yo
58. gital optical output jack you can connect the unit and your TV with an audio cord for listening to TV sound via the system For connection details see Connecting the other components page 24 2368 Q E Q o mt D 2 Q o o 2 LII G S 2 D JE E o 0 Connecting the other components When a component you wish to connect to the system has an HDMI OUT jack You can connect a component that has an HDMI OUT jack such as a set top box digital satellite receiver or PLAYSTATION 3 etc with an HDMI cable An HDMI cable connection can send both video and audio signals By connecting the system and the component using an HDMI cable you can enjoy high quality digital picture and sound via the HDMI IN 1 or HDMI IN 2 jack Rear panel of the unit HDMI cable not supplied Use HDMI IN 1 or HDMI IN 2 To the HDMI OUT jack of the set top box digital satellite receiver or PLAYSTATION 3 etc po signals from the HDMI IN 1 2 jacks are sent to the HDMI OUT jack only when the HDMI1 or HDMI2 function is selected To send an audio signal from the HDMI IN 1 2 jacks to the HDMI OUT jack you may need to change the audio output setting For details see Audio Output in Audio Settings page 59 Youcan change the audio input of a component that is connected to the HDMI IN 1 jack to the TV DIGITAL IN OPTICAL jack For details see HDMI1 Audio In
59. he disc tray does not open and you cannot remove the disc even after you press amp Try the following Press and hold B and 4 on the unit for more than 5 seconds to open the disc tray 2 Remove the disc 8 Disconnect the AC power cord mains lead from the wall outlet mains then reconnect after several minutes The system does not work normally Disconnect the AC power cord mains lead from the wall outlet mains then reconnect after several minutes Messages Symptom Problems and solutions A new software version is available Please go to the Setup section of the menu and select Network Update to perform the update appears on the TV screen See Network Update page 57 to update the system to a newer software version PROTECTOR and PUSH PWR appear alternately in the front panel display Press I to turn off the system and check the following items after STANDBY disappears Are the and speaker cords short circuited Are you using only the specified speakers Is anything blocking the ventilation holes of the system After checking the above items and fixing any problems turn on the system If the cause of the problem cannot be found even after checking all the above items consult your nearest Sony dealer LOCKED appears in the front panel display Set the child lock function to off page 50 DEMO LOCK appears in the front panel d
60. iant character formats Other character formats may be displayed differently Depending on the writing software used the input characters may be displayed differently A disc does not start playing from the beginning Resume play has been selected Press OPTIONS and select Play from start then press Playback does not start from the resume point where you last stopped playing The resume point may be cleared from memory depending on the disc when you open the disc tray you disconnect the USB device you play other content you turn off the unit The language for the soundtrack subtitle or angles cannot be changed Try using the BD s or DVD s menu Multi lingual tracks subtitles or multi angles are not recorded on the BD or DVD being played Bonus contents or other data that are contained in a BD ROM cannot be played Try the following Remove the disc 2 Turn the system off 8 Remove and reconnect the USB device page 35 Turn the system on Insert the BD ROM with BONUSVIEW BD LIVE USB device Symptom Problems and solutions The USB device is not Try the following Turn the system off Remove and reconnect the USB recognized device 8 Turn the system on Make sure that the USB device is securely connected to the amp USB port Check if the USB device or a cable is damaged Check if the USB device is on If the USB device is connec
61. ice For playable types of files see Playable Types of Files page 72 1 Connect the USB device to the lt USB port on the unit Refer to the operating instructions of the USB device before connecting Rear panel USB device Front panel USB device Press HOME The home menu appears on the TV screen Press 2 to select fH Video JJ Music or K Photo Press 1 4 to select 2 USB device front or 2 USB device rear then press Note Do not remove the USB device during operation To avoid data corruption or damage to the USB device turn the system off when connecting or removing the USB device xoegfeld E 35 GB Enjoying an iPod iPhone Except for Russian and Indian models You can enjoy the music video photo and charge the battery of an iPod iPhone via the system European Australian Singapore and Thai models only Compatible iPod iPhone models The compatible iPod iPhone models are as follows Update your iPod iPhone with the latest software before using with the system Made for iPod classic iPod 5th generation video iPod nano 6th generation iPod nano 5th generation video camera iPod nano 4th generation video iPod nano 3rd generation video iPod nano 2nd generation aluminum iPod nano Ist generation iPod touch 4th generation iPod touch 3rd generation iPod touch 2nd gener
62. ights and Trademarks This system incorporates with Dolby Digital and Dolby Pro Logic II adaptive matrix surround decoder and the DTS Digital Surround System Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 226 616 6 487 535 7 212 872 7 333 929 7 392 195 7 272 567 amp other U S and worldwide patents issued amp pending DTS DTS HD and the Symbol are registered trademarks amp DTS HD Master Audio and the DTS logos are trademarks of DTS Inc Product includes software O DTS Inc All Rights Reserved This system incorporates High Definition Multimedia Interface HDMITM technology HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Java is a trademark of Oracle and or its affiliates BD LIVE and BONUSVIEW are trademarks of Blu ray Disc Association Blu ray Disc is a trademark Blu ray Disc DVD RW DVD RW DVD R DVD R DVD VIDEO and CD logos are trademarks Blu ray 3D and Blu ray 3D logo are trademarks of Blu ray Disc Association BRAVIA is a trademark of Sony Corporation e AVCHD and the AVCHD logo
63. isplay Contact your nearest Sony dealer or local authorized Sony service facility Exxxx appears in the front panel display Contact your nearest Sony dealer or local authorized Sony service facility and give the error code N appears without any messages on the entire TV screen Contact your nearest Sony dealer or local authorized Sony service facility Picture Symptom Problems and solutions There is no picture Check the output method on your system page 22 There is no picture when you make an HDMI cable connection The unit is connected to an input device that is not HDCP High bandwidth Digital Content Protection compliant HDMI on the front panel does not light up page 22 3D images from the HDMI IN 1 or HDMI IN 2 jack do not appear on the TV screen Depending on the TV or video component 3D images may not appear There is no picture or output resolution is low when you make a component video cable connection Non European non Saudi Arabian models only When playing a BD ROM a high resolution image may not be output because of copy protection limitations We recommend to make a HDMI connection page 22 No picture appears when the video output resolution selected in Output Video Format is incorrect Press and hold B and VOL on the unit for more than 5 seconds to reset the video output resolution to the lowest resolution
64. k Layer Super Audio CD Plays the Super Audio CD layer CD Plays the CD layer E Super Audio CD Playback Channels DSD 2ch Plays the 2ch area DSD Multi Plays the multi channel area 4 i System Settings You can make the system related settings E OSD You can select your language for the system on screen displays E Illumination Display You can select the status of the soft touch buttons page 11 and front panel display page 12 Standard On The soft touch buttons and the front panel display stay illuminated Simple Off The soft touch buttons and the front panel display turn off when the system is not being operated E HDMI Settings Control for HDMI On On You can operate mutually between components that are connected with an HDMI cable Off Off Audio Return Channel This function is available when you connect the system and TV that is compatible with the Audio Return Channel function sjueunsn py pue sumas 61 GB 62 GB Auto The system can receive the digital audio signal of the TV automatically via an HDMI cable Off Off This function is available only when Control for HDMI is set to On HDMII Audio Input Mode European models only You can select the audio input of the component that is connected to the HDMI IN 1 jack HDMI1 The sound of the component that is connected to the HDMI IN 1 jack is input from the HDMI
65. mation 3 Search History Displays a list of previous searches performed via the Video Search or Music Search function To search for further related information Select an item in the lists and select Information Search or Internet Video Search Available Options Various settings and playback operations are available by pressing OPTIONS The available items differ depending on the situation Common options Items Details Surround Setting Changes the surround setting page 31 Repeat Setting Sets repeat playback Favourites List Displays the Favorites List Play Stop Starts or stops playback Play from start Plays the item from the beginning Add to Favourites Adds an Internet content item to the Favorites List Remove from Favourites Erases an Internet content item from the Favorites List Start Party Starts a party with the selected source This item may not appear depending on the source Leave Party Leaves from a party which the system is participating in The PARTY STREAMING function continues among other participating devices Close Party Closes a party which the system is participating in The PARTY STREAMING function ends for all other participating devices Hi Video only Jj Music only Items Details Items Details A V SYNC Adjusts the gap between Add Slideshow Registers music
66. nder Bases 4 remote 1 OoooDpg9o oonn o Siks R6 size AA batteries 2 e Lower parts of the front and surround speakers 4 e Calibration mic 1 High Speed HDMI cable 1 Indian and Chinese models only Screws silver 4 TTTT Screws black 12 8 Operating Instructions ki e hi 9 Quick Setup Guide e e e e e e Speaker Installation Guide Software License Information 768 BDV E880 Front speakers 2 Surround speakers 2 Center speaker 1 Subwoofer 1 Speaker cords 5 red white green gray blue 8658 Speaker bottom covers 2 R6 size AA batteries 2 Se Oo Bases 2 a e Ne 9 Lower parts of the front speakers 2 High Speed HDMI cable 1 Indian Saudi Arabian Singapore Chinese and Taiwan models only Calibration mic 1 Screws silver 2 Dock for iPod iPhone e e TDM iP30 1 Singapore models only Screws black 6 PeYPPPPP FM wire antenna aerial 1 pre USB cable 1 Singapore a models only Video cord 1 Russian Saudi Arabian Singapore Operating Instructions and Taiwan models only Quick Setup Guide Speaker Installation Guide Software License Information Remote commander remote 1 BDV E380 Front speakers 2 e FM wire antenna aerial 1 Dock for iPod iPhone TDM iP30 1 European B Singa
67. ng the system 1 Prepare for Internet browsing Connect the system to a network page 27 2 Press HOME The home menu appears on the TV screen 3 Press to select amp Network 4 Press to select Internet Browser then press The Internet Browser display appears Note Some websites may not display correctly or not function To enter a URL Select URL entry from the options menu Enter the URL using the software keyboard then select Enter To set the default start page While the page you want to set is displayed select Set as start page from the options menu To quit Internet Browser Press HOME Internet Browser display You can check website information by pressing DISPLAY The display information differs depending on the website and page status 1 Page title Cursor Move by pressing 4 W 3 Place the cursor on the link you want to view then press The linked website is displayed Isl Page address SSL icon Appears when the linked URL is secured Ia e a Signal strength indicator Appears when the system is connected to a wireless network 6 Progress bar Loading icon Appears when the page is being read or during file download transfer 7 Text input field Press then choose Input from the options menu to open the software keyboard 8 Scroll bar Press 4 W 5 to move the p
68. o J410 l 5568 5668 4 Press t to select the security mode then press None Select this if the wireless LAN is unsecured Setup of wireless LAN connectivity is finished Next enter the IP address settings by following the Steps of Auto setting or Manual setting in When connecting to the LAN with a LAN cable above WEP The wireless LAN is protected by a WEP key WPA WPA2 PSK The wireless LAN is protected by a WPA PSK or WPA2 PSK WPA2 PSK The wireless LAN is protected by a WPA2 PSK D Enter the WEP key WPA key by following the on screen messages then press gt Setup of wireless LAN connectivity is finished Next enter the IP address settings by following the Steps of Auto setting or Manual setting in When connecting to the LAN with a LAN cable above About wireless LAN security Since communication via the wireless LAN function is established by radio waves the wireless signal may be susceptible to interception To protect wireless communication this system supports various security functions Be sure to correctly configure the security settings in accordance with your network environment No Security Although you can easily make settings anyone can intercept wireless communication or intrude into your wireless network even without any sophisticated tools Keep in mind that there is a risk of unauthorized access or interception of data WEP WEP applies
69. ol function A password allows you to set a restriction on BD ROM DVD VIDEO or Internet video playback If necessary you can differentiate the restriction levels for BD ROMs and DVD VIDEOS W Parental Control Area Code Playback of some BD ROMs or DVD VIDEOs can be limited according to the geographic area Scenes may be blocked or replaced with different scenes Follow the on screen instructions and enter your four digit password E BD Parental Control Playback of some BD ROMs can be limited according to the age of the users Scenes may be blocked or replaced with different scenes Follow the on screen instructions and enter your four digit password W DVD Parental Control Playback of some DVD VIDEOS can be limited according to a predetermined level such as the age of the users Scenes may be blocked or replaced with different scenes Follow the on screen instructions and enter your four digit password W Internet Video Parental Control Playback of some Internet videos can be limited according to the age of the users Scenes may be blocked or replaced with different scenes Follow the on screen instructions and enter your four digit password W Internet Video Unrated Allow Allows the playback of unrated Internet videos Block Blocks the playback of unrated Internet videos 44 Music Settings You can make detailed settings for Super Audio CD playback E Super Audio CD Playbac
70. on the Internet service provider or the router For details refer to the instruction manuals that have been provided by your Internet service provider or supplied with the router For more information go to the following URL For customers in Europe http support sony europe com For customers in Taiwan http www sony asia com support tw For customers in other countries regions http www sony asia com support When connecting to the LAN with a LAN cable Follow the Steps below for connecting to a LAN Local Area Network Auto setting 1 2 Press AW to select Wired Setup on the Internet Settings display then press Press t to select Auto then press The system performs the network setting automatically and internet settings appear on the TV screen Press gt 4 Press 14 to select Save amp Connect then press 3 The system starts checking the network connection Check that the message Internet Settings is now complete appears then press The setup is finished If the message does not appear follow the on screen messages Manual setting 1 2 3 Press 4 4 to select Wired Setup on the Internet Settings display then press Press 14 to select Custom then press 3 Press A4 to select the network setting type then press Auto The system sets the IP address automatically and the DNS Settings display appears When you select Auto
71. or Super Audio CD playback System Settings page 61 Makes the system related settings Network Settings page 62 Makes detailed settings for Internet and network Easy Setup page 63 Re runs the Easy Setup to make AJ a H eJ 1 2 3 the basic settings Screen Settings e Resetting page 63 29 Resets the system to the factory Audio Sotings settings sjuounsnipy pue suas BD DVD Viewing Settings Parental Control Settings 3 Press t to select the setup category icon to change then press Example Screen Settings Network Update es 6 i3 8 Setup QO Network Update Ol sees Fay Audio Settings You can update and improve the functions of the system For information about update functions refer to the following website 3D Output Setting Auto Set the 3D output method when playing a BD ROM TV Sc Setting for 3D 46 117cm TV Type 16 9 Screen Format Original You can setup the following options Icon Explanation Network Update page 57 t X Updates the software of the For customers in Europe system http support sony europe com Screen Settings page 58 Makes the screen settings according to the type of connecting jacks For customers in Taiwan http www sony asia com support tw 57 GB 5868 For customers in other countries regions http www sony asia com support During a softwa
72. oth slightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzine If you have any questions or problems concerning your system please consult your nearest Sony dealer On cleaning discs disc lens cleaners Do not use cleaning discs or disc lens cleaners including wet or spray types These may cause the apparatus to malfunction On replacement of parts n the events that this system is repaired repaired parts may be collected for reuse or recycling purposes On your TV s color If the speakers should cause the TV screen to have color irregularity turn off the TV then turn it on after 15 to 30 minutes If color irregularity should persist place the speakers further away from the TV set IMPORTANT NOTICE Caution This system is capable of holding a still video image or on screen display image on your television screen indefinitely If you leave the still video image or on screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen Projection televisions are especially susceptible to this On moving the system Before moving the system make sure that there is no disc inserted and remove the AC power cord mains lead from the wall outlet mains Notes about the Discs On handling discs To keep the disc clean handle the disc by its edge Do not
73. play then press or gt 3 Press to adjust the delay between the picture and sound You can adjust from 0 ms to 300 ms in 25 ms increments 4 Press The setting is made D Press OPTIONS The option menu in the front panel display turns off Sound Adjustment Selecting the Effect to Suit the Source You can select a suitable sound mode for movies or music 9 so MODE Press SOUND MODE repeatedly during playback until the desired mode appears in the front panel display AUTO The system selects MOVIE or MUSIC automatically to produce the sound effect depending on the disc or sound stream MOVIE The system provides the sound for movies MUSIC The system provides the sound for music SPORTS The system adds reverberation for sports programs GAME ROCK The system provides the sound for music rhythm games OMNI DIR The same sound is audible anywhere in the room 3D SUR 3D SUR is a unique Sony algorithm used for playing 3D three dimensional content that provides a 3D sound experience with depth and presence by creating a virtual sound field close to your ears HALL The system reproduces the sound of a concert hall NIGHT You can enjoy sound effects or dialog as you would in a movie theater even at low volume It is useful for watching movies at night Depending on the disc or source when you select
74. play turns off S Note oQ je When the home menu is displayed on the TV screen this setting can be changed by selecting the surround setting 5 via Surround Setting in Audio Settings of Setup page 60 D le About speaker output of each surround setting pe The table below describes the options when you connect all the speakers to the unit iS The default setting is A F D Multi A F D MULTI Sound from Surround setting Effect Depending on the source A F D Standard The system discriminates the sound format of the source and A F D STD presents sound as it was recorded encoded AUTO FORMAT DIRECT STANDARD A F D Multi 2 channel source The system simulates surround sound A A F D MULTI from 2 channel sources and outputs sound from the 5 1 i H AUTO FORMAT channel speakers by duplicating 2 channel source sound DIRECT MULTI across each speaker Multi channel source The system outputs sound from the T speakers depending on the number of channels of the source e Dolby Pro Logic 2 channel source The system simulates surround sound QUE PRO LOGIC from 2 channel sources and outputs sound from the 5 1 j a Li Dolby PL II Movie channel speakers PLII MOVIE Dolby Pro Logic PRO LOGIC performs Dolby Pro Logic decoding T Dolby PL II Movie PLII MOVIE performs Dolby Pro Logic II movie mode decoding Multi channel source The system outpu
75. pore and Thai models only Es Video cord 1 Surround speakers 2 USB cable 1 European Singapore and Thai models only om R6 size AA batteries 2 Operating Instructions o Quick Setup Guide Speaker Installation Guide Calibration mic 1 Software License Information Remote commander remote 1 Center speaker 1 Subwoofer 1 High Speed HDMI cable 1 Singapore Thai and Taiwan models only Speaker cords 5 red white green gray blue LU Preparing the remote Insert two R6 size AA batteries supplied by matching the and ends on the batteries to the markings inside the compartment 1058 Index to Parts and Controls For more information refer to the pages indicated in parentheses Front panel Front panel display 2 N Soft touch buttons indicators open close page 34 Opens or closes the disc tray P play Starts or re starts playback resume play Plays a slideshow when a disc containing JPEG image files is inserted E stop Stops playback and remembers the stop point resume point The resume point for a title track is the last point you played or the last photo for a photo folder VOL Adjusts the system s volume FUNCTION Selects the playback source lt USB port page 35 Us
76. put mode in HDMI Settings page 61 European models only 24 When the component does not have an HDMI OUT jack Connect the system so that video signals from the system and other component are sent to the TV and audio signals from the component are sent to the system as follows TV Video out Component ooo Audio out ignal fi Ssisin Signal flow A Video signal e r N Audio signal If the component plays sound only connect the audio output of the component to the system Depending on the jacks on the component select the connection method Component which has a digital coaxial output jack e Component which does not have a digital coaxial output jack amp Rear panel of the unit ue X Signal flow Audio cord Q Digital coaxial cord not supplied not supplied White ed To the digital coaxial out jack To the audio out jacks of the VCR digital of the VCR or digital satellite 9 Su satellite receiver PlayStation or receiver etc a portable audio source etc anwo Note If you make connection above set Control for HDMI in HDMI Settings of System Settings to Off page 61 You can enjoy component sound by selecting the SAT CABLE function for connection or the AUDIO function for connection page 30
77. raunhofer IIS and Thomson iPhone iPod iPod classic iPod nano and iPod touch are trademarks of Apple Inc registered in the U S and other countries Made for 9 iPod Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance JiPhone Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries This product contains technology subject to certain intellectual property rights of Microsoft Use or distribution of this technology outside of this product is prohibited without the appropriate license s from Microsoft Content owners use Microsoft PlayReady content access technology to protect their intellectual property including copyrighted content This device uses PlayReady technology to access PlayReady protected content and or WMDRM protected content If the device fails to properly enforce restrictions on content usage content owners may require Microsoft to revoke the device s ability to consume PlayReady protec
78. re update UPDATING appears in the front panel display After the update completes the main unit automatically turns off Please wait for the software update to complete do not turn the main unit on or off or operate the main unit or TV z Screen Settings W 3D Output Setting Auto Normally select this Off Select this to display all contents in 2D Note 3D video from the HDMI IN 1 or HDMI IN 2 jack is output regardless of this setting E TV Screen Size Setting for 3D Sets the screen size of your 3D compatible TV This setting does not apply to 3D video from the HDMI IN 1 or HDMI IN 2 jack E TV Type 16 9 Select this when connecting to a wide screen TV or a TV with a wide mode function 4 3 Select this when connecting to a 4 3 screen TV without a wide mode function E Screen Format Original Select this when connecting to a TV with a wide mode function Displays a 4 3 screen picture in 16 9 aspect ratio even on a wide screen TV Fixed Aspect Ratio Changes the picture size to fit the screen size with the original picture aspect ratio E DVD Aspect Ratio Letter Box Displays a wide picture with black bands on the top and bottom Pan amp Scan Displays a full height picture on the entire screen with trimmed sides E Cinema Conversion Mode Auto Normally select this The unit automatically detects whether the material is
79. rk settings page 62 network USB wireless LAN connection Symptom Problems and solutions You cannot connect your PC to The wireless settings of the router may change automatically if you use the the Internet after Wi Fi Wi Fi Protected Setup function before adjusting the settings of the router In Protected Setup WPS is this case change the wireless settings of your PC accordingly performed You cannot connect the system Check if the wireless LAN router is on to your wireless LAN router Depending on the usage environment including the wall material radio wave reception conditions or obstacles between the system and the wireless LAN router the possible communication distance may be shortened Move the system and the wireless LAN router closer to each other Devices that use a 2 4 GHz frequency band such as a microwave Bluetooth or digital cordless device may interrupt the communication Move the unit away from such devices or turn off such devices The desired wireless routeris not Press RETURN to return to the previous screen and try Scan again If the detected even if Scan is desired wireless router is still not detected press RETURN to select Manual performed registration The system cannot connect to the The distance between the unit and the wireless LAN router is too far page 27 network or the network connection is unstable Playable Discs BD ROM BD R BD RE
80. ront speaker distance Centre 3 0 m Set the center speaker distance Surround Left Right 3 0 m Set the surround speaker distance Subwoofer 3 0 m Set the subwoofer distance This item appears when you set it to Yes in the Connection setting Depending on the input stream Distance may not be effective E Level You can adjust the sound level of the speakers You can set the parameters from 6 0 dB to 6 0 dB Be sure to set Test Tone to On for easy adjustment Front Left Right 0 0 dB Set the front speaker level Centre 0 0 dB Set the center speaker level Surround Left Right 0 0 dB Set the surround speaker level Subwoofer 0 0 dB Set the subwoofer level This item appears when you set it to Yes in the Connection setting suonejedo Jaylo l ages H Test Tone The speakers will emit a test tone to adjust Level Off The test tone is not emitted from the speakers On The test tone is emitted from each speaker in sequence while adjusting level When you select one of the Speaker Settings items the test tone is emitted from each speaker in sequence Adjust the sound level as follows Set Test Tone to On Press t to select Level then press Press 1 4 to select the desired speaker type then press 3 Press 2 to select the left or right speaker then press t V to adjust the level Press Repeat Steps 3 to 5
81. see Connecting the TV page 22 Remote Easy Control You can control the basic functions of the system via the TV remote when the system s video output is displayed on the TV screen Language Follow When you change the language for the on screen display of the TV the system s on screen display language is also changed after turning the system off and on Routing Control When you perform One Touch Play on the connected component the system turns on and sets the system s function to HDMII or HDMI2 depending on the HDMI input jack in use and your TV s input is automatically set to the HDMI input to which the system is connected suoneJodo 134 0 al 4769 48 e Make sure that the component is connected to the system via an HDMI cable and the Control for HDMI function of the connected component is set to on Calibrating the Appropriate Settings Automatically Auto Calibration D C A C Digital Cinema Auto Calibration can set the appropriate surround sound automatically e The system outputs a loud test sound when Auto Calibration starts You cannot turn the volume down Give consideration to children and neighbors 1 Press HOME The home menu appears on the TV screen Press to select 523 Setup Press t to select Audio Settings then press Press 1 to select Auto Calibration then press The confirmation display for Auto Calibration appears OON 5 Connect
82. ss HOME The home menu appears on the TV screen Press gt to select 23 Setup Press t V to select Easy Setup then press Press 2 to select Start then press i The Easy Setup Display appears A OON 2968 Q E Q 7 mt D 2 Q o 3 2 E S 2 D IE E Oo e Step 5 Selecting the Source You can select the playback source FUNCTION an Press FUNCTION repeatedly until the desired function appears in the front panel display Each time you press FUNCTION the function changes as follows BD DVD FM HDMI1 HDMI2 TV SAT CABLE gt AUDIO BD DVD Function Source BD DVD Disc USB device iPod iPhone or network device to be played by the system FM FM radio page 45 HDMI1 Component that is connected to HDMI2 the HDMI IN 1 or HDMI IN 2 jack on the rear panel page 24 TV Component TV etc that is connected to the TV DIGITAL IN OPTICAL jack on the rear panel or a TV compatible with the Audio Return Channel function that is connected to the HDMI OUT jack on the rear panel page 22 SAT CABLE Component that is connected to the SAT CABLE DIGITAL IN COAXIAL jack on the rear panel page 24 AUDIO Component that is connected to the AUDIO AUDIO IN L R jacks on the rear panel page 24 Except for Russian and Indian models
83. tails see Step 3 Connecting to the Network page 27 E Network Connection Diagnostics You can run the network diagnostic to check if the network connection has been made properly E Connection Server Settings Sets whether or not to display the connected DLNA server E Renderer Set up Automatic Access Permission Sets whether or not to allow automatic access from newly detected DLNA controller Smart Select Allows a Sony DLNA controller to find the system as the target component to operate by using the infrared ray You can set this function to on or off Renderer Name Displays the system s name as it is listed on other DLNA devices on the network E Renderer Access Control Sets whether or not to accept commands from DLNA controllers W Party Auto Start On Starts a PARTY or joins an existing PARTY at the request of a networked device compatible with the PARTY STREAMING function Off Off E Media Remote Device Registration Registers your Media remote device E Registered Media Remote Devices Displays a list of your registered Media remote devices 7 Easy Setup Re runs the Easy Setup to make the basic settings Follow the on screen instructions 9 Resetting E Reset to Factory Default Settings You can reset the system settings to the factory default by selecting the group of settings All the settings within the group will be reset
84. te the buttons on the unit while the child lock function is on LOCKED flashes in the front panel display Controlling Your TV with the Supplied Remote By adjusting the remote signal you can control your TV with the supplied remote When you replace the batteries of the remote the code number may reset itself to the default SONY setting Reset the appropriate code number Preparing the remote for controlling the TV Press and hold TV I while entering your TV s manufacturer s code see the table using the number buttons Then release TV Vo If the setting is unsuccessful the currently registered code is not changed Re enter the code number Code numbers of controllable TVs If more than one code number is listed try entering them one at a time until you find the code that works with your TV Manufacturer Code number SONY 01 default LG 05 PANASONIC 06 PHILIPS 02 03 07 SAMSUNG 02 08 TOSHIBA 04 Changing the Brightness of the Front Panel Display Press DIMMER Each time you press DIMMER the brightness of the front panel display is changed Saving Power in Standby Mode Check that the following settings are both made Control for HDMI in HDMI Settings is set to Off page 61 Quick Start Mode is set to Off page 62 suoneglodo J410 a 51 GB Browsing Websites You can connect to the Internet and enjoy websites like the Sony homepage usi
85. te waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local Civic Office your household waste disposal service or the shop where you purchased the product Disposal of waste batteries applicable in the European Union and P b other European countries with separate collection systems This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste On certain batteries this symbol might be used in combination with a chemical symbol The chemical symbols for mercury Hg or lead Pb are added if the battery contains more than 0 000546 mercury or 0 004 lead By ensuring these batteries are disposed of correctly you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery The recycling of the materials will help to conserve natural resources In case of products that for safety performance or data integrity reasons require a permanent connection with an incorporated battery this battery should be replaced by qualified service staff only To ensure that the battery will be treated properly hand over the product at end of life to the applicable collection point for the recycling of electrical and
86. ted content Revocation should not affect unprotected content or content protected by other content access technologies Content owners may require you to upgrade PlayReady to access their content If you decline an upgrade you will not be able to access content that requires the upgrade DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance All other trademarks are trademarks of their respective owners Other system and product names are generally trademarks or registered trademarks of the manufacturers and 9 marks are not indicated in this document About These Operating Instructions The instructions in these Operating Instructions describe the controls on the remote You can also use the controls on the unit if they have the same or similar names as those on the remote In this manual disc is used as a general reference for BDs DVDs Super Audio CDs or CDs unless otherwise specified by the text or illustrations The instructions in this manual are for BDV E980 BDV E880 and BDV E380 BDV E980 is the model used for illustration purposes Any difference in operation is clearly indicated in the text for example BDV E980 only Some illustrations are presented as conceptual drawings and may be different from the actual products The items displayed on the TV screen may vary depending on th
87. ted via a USB hub disconnect it and connect the USB device directly to the unit BRAVIA Internet Video Symptom Problems and solutions The picture sound is poor certain programs display with a loss of detail especially during fast motion or dark scenes Picture sound quality may be poor depending on Internet content providers Picture sound quality may be improved by changing the connection speed Sony recommends a connection speed of at least 2 5 Mbps for standard definition video and 10 Mbps for high definition video Not all videos contain sound The picture is small Press to zoom in uoneuvojuj jeuonippv i 6968 7068 BRAVIA Sync Control for HDMI Symptom Problems and solutions The Control for HDMI Check that Control for HDMI is set to On page 61 function does not work If you change the HDMI connection turn the system off and on again BRAVIA Sync If power failure occurs set Control for HDMI to Off then set Control for HDMI to On page 61 Check the following and refer to the operating instructions supplied with the component the connected component is compatible with the Control for HDMI function the connected component s setting for the Control for HDMI function is correct Network connection Symptom Problems and solutions The system cannot connect to the Check the network connection page 27 and the netwo
88. the calibration mic to the A CAL MIC jack on the rear panel Set up the calibration mic at ear level using a tripod etc not supplied The front of each speaker should face the calibration mic and there should be no obstruction between the speakers and the calibration mic 6 Press AW to select OK To cancel select Cancel 7 Press Auto Calibration starts The system adjusts the speaker settings automatically Be quiet during the measurement Before Auto Calibration make sure that the surround amplifier turns on and you install the surround amplifier in the appropriate location If you install the surround amplifier in an improper location such as another room proper measurement will not be obtained 8 Confirm the conclusions of Auto Calibration The speakers connected to the unit are listed as Yes on the TV screen If measurement fails follow the message then retry Auto Calibration The measurement for Subwoofer is always Yes and Speaker Settings returns to the default setting when you perform Auto Calibration 9 Press A4 to select OK or Cancel then press 3 E The measurement is OK Disconnect the calibration mic then select OK The result is implemented E The measurement is not OK Follow the message then select OK to retry While the Auto Calibration function is working do not operate the system Setting the Speakers Speaker Settings To obtain the b
89. the output method where the audio signal is output Speaker Outputs multi channel sound from the system s speakers only Speaker HDMI Outputs multi channel sound from the system s speakers and 2 channel linear PCM signals from the HDMI OUT jack HDMI Outputs sound from the HDMI OUT jack only Sound format depends on the connected component Note When Control for HDMI is set to On page 61 Audio Output is set to Speaker HDMI automatically and this setting cannot be changed Audio signals are not output from the HDMI OUT jack when Audio Output is set to Speaker HDMI sjueunsn py pue sumas l 59565 6055 and HDMII Audio Input Mode page 61 is set to TV European models only When Audio Output is set to HDMI the output signal format for the TV and SAT CABLE function is 2 channel linear PCM E Sound Effect You can set the system s sound effects SOUND MODE and Surround Setting to on off On Enables all of the system s sound effects The upper limit of sampling frequency is set to 48 kHz Off The sound effects are disabled Select this when you do not want to set the upper limit of sampling frequency E Surround Setting You can select the surround setting For details see Step 6 Enjoying Surround Sound page 31 E Speaker Settings To obtain the best possible surround sound set the speakers For details see Setting th
90. touch the surface Do not stick paper or tape on the disc Do not expose the disc to direct sunlight or heat sources such as hot air ducts or leave itin a car parked in direct sunlight as the temperature may rise considerably inside the car After playing store the disc in its case On cleaning Before playing clean the disc with a cleaning cloth Wipe the disc from the center out E Do not use solvents such as benzine thinner commercially available cleaners or anti static spray intended for vinyl LPs This system can only play a standard circular disc Using neither standard nor circular discs e g card heart or star shape may cause a malfunction Do not use a disc that has a commercially available accessory attached such as a label or ring uoneuuoju jeuonippv i 6568 6642 Troubleshooting If you experience any of the following difficulties while using the system use this troubleshooting guide to help remedy the problem before requesting repairs Should any problem persist consult your nearest Sony dealer Note that if service personnel changes some parts during repair these parts may be retained General Symptom Problems and solutions The power is not turned on Check that the AC power cord mains lead is connected securely The remote does not function The distance between the remote and the unit is too far The batteries in the remote are weak T
91. ts sound from the speakers depending on the number of channels of the source DTS Neo 6 2 channel source The system simulates surround sound Cinema from 2 channel sources and produces 6 1 channel sound Li T NEO6 CIN DTS Neo 6 Cinema NEO6 CIN performs DTS DTS Neo 6 Music Neo 6 Cinema mode decoding NEO6 MUS DTS Neo 6 Music NEO6 MUS performs DTS Neo 6 Music mode decoding Multi channel source The system outputs sound from the speakers depending on the number of channels of the source 2ch Stereo The system outputs the sound from the front speakers and 2CH ST subwoofer regardless of sound format or number of channels H H Multi channel surround formats are downmixed to 2 channels 32 GB Note When you select A F D Multi A F D MULTI depending on the disc or source the beginning of the sound may be cut off while the optimum mode is automatically selected To avoid cutting the sound select A F D Standard A F D STD When bilingual broadcast sound is input Dolby Pro Logic PRO LOGIC and Dolby PL II Movie PLII MOVIE are not effective Depending on the input stream the surround settings may not be effective When you play a Super Audio CD surround settings are not activated payie1s Guna You can also select the surround setting in Surround Setting of Audio Settings page 60 For functions other
92. u play a CD e Select stereo sound by pressing OD page 43 The sound comes from the center speaker only Depending on the disc the sound may come from the center speaker only No sound or only a very low level sound is heard from the surround speakers Check the speaker connections and settings pages 20 49 Check the surround setting page 31 Depending on the source the effect of the surround speakers may be less noticeable e A 2 channel source is being played Distortion occurs in the sound of a connected component Reduce the input level for the connected component by setting Attenuate AUDIO page 59 Tuner Symptom Problems and solutions Radio stations cannot be tuned in Check that the antenna aerial is connected securely Adjust the antenna aerial or connect an external antenna aerial if necessary The signal strength of the stations is too weak when tuning in with automatic tuning Use manual tuning Playback Symptom Problems and solutions The disc does not play The region code on the BD DVD does not match the system Moisture has condensed inside the unit and may cause damage to the lenses Remove the disc and leave the unit turned on for about half an hour The system cannot play a recorded disc that is not correctly finalized page 71 File names are not displayed correctly The system can only display ISO 8859 1 compl
93. up Menu or DVD s y Peres menu View Image Displays the selected picture Title Search Searches for a title on BD ROMs DVD VIDEOs and starts playback from the beginning Chapter Search Searches for a chapter and starts playback from the beginning Angle Switches to other viewing angles when multi angles are recorded on BD ROMs DVD VIDEOs IP Content Noise Reduction Adjusts the video quality for Internet content Video Search Displays information on the BD ROM DVD ROM based on Gracenote technology yoeqhe d Al 416 426 Adjusting the delay between the picture and sound A V SYNC When the sound does not match the pictures on the TV screen you can adjust the delay between the picture and sound The setting method differs depending on the function Note Depending on the input stream A V SYNC may not be effective When playing video content via the BD DVD function 1 Press OPTIONS The option menu appears on the TV screen 2 Press 1 to select A V SYNC then press 3 Press 5 to adjust the delay between the picture and sound You can adjust from 0 ms to 300 ms in 25 ms increments 4 Press The setting is made When playing via the HDMI1 HDMI2 TV SAT CABLE or AUDIO function 1 Press OPTIONS The option menu appears in the front panel display 2 Press AA repeatedly until A V SYNC appears in the front panel dis
94. urn the unit off before connecting the extension cable or inserting the USB Wireless LAN Adapter After inserting the USB Wireless LAN Adapter to the base and connecting the extension cable to the amp USB port front or rear turn the unit on again 2768 la E Q o Ld D 2 Q wa The placement distance between the USB Wireless LAN Adapter and your wireless LAN router differs based on your usage environment If the system cannot connect to the network or the network connection is unstable move the USB Wireless LAN Adapter to a different position or place the USB Wireless LAN Adapter and the wireless LAN router closer to each other You can also get the information for network settings from the following Sony support page For customers in Europe http support sony europe com o 3 2 a S 2 D IE E o 2 For customers in Taiwan http www sony asia com support tw For customers in other countries regions http www sony asia com support 288 Step 4 Performing the Easy Setup Before performing Step 4 Make sure all connections are secure and then connect the AC power cord mains lead Follow the Steps below to make the basic adjustments for using the system Displayed items vary depending on the country model _ Vo 9 58 C2 7 Home 1 Turn on the TV 2 Connect the calibration mic to the A CAL MIC jack on the rear panel Set up the calibration mic
95. video based or film based and switches to the appropriate conversion method Video The conversion method suited for video based material will always be selected regardless of the material E Output Video Format HDMI Normally select Auto Select Original Resolution to output the resolution recorded on the disc When the resolution is lower than SD resolution it is scaled up to SD resolution Component Video for non European non Saudi Arabian models Select the resolution that suits your TV Video Automatically sets the lowest resolution Note If no picture appears when setting HDMI or Component Video resolution try another resolution setting Non European non Saudi Arabian models only When connecting via the COMPONENT VIDEO OUT jack and Component Video is selected BD ROM playback of protected content is only supported at 480i 576i output resolution pages 22 29 Non European non Saudi Arabian models only M BD DVD ROM 1080 24p Output Auto Outputs 1920 x 1080p 24 Hz video signals only when connecting a 1080 24p compatible TV using the HDMI OUT jack Off Select this when your TV is not compatible with 1080 24p video signals E YCbCr RGB HDMI Auto Automatically detects the type of external device and switches to the matching color setting YCbCr 4 2 2 Outputs YCbCr 4 2 2 video signals YCbCr 4 4 4 Outputs YCbCr 4 4 4 video signals RGB
96. ypes of connections When connecting with an HDMI cable you need to select the type of output signal when performing the Easy Setup page 29 For further HDMI settings see HDMI Settings page 61 About Audio Return Channel If your TV is compatible with the Audio Return Channel function an HDMI cable connection also sends a digital audio signal from the TV You do not need to make a separate audio connection for listening to TV sound For setting the Audio Return Channel function see Audio Return Channel page 61 Component video cable connection for non European non Saudi Arabian models If your TV does not have an HDMI jack but has component video input jacks connect to the TV with a component video cable Picture quality will be improved compared to using a video cord connection When connecting with a component video cable you need to select the type of output signal in the Easy Setup page 29 Video cord connection If your TV does not have an HDMI jack or a component video input jack make this connection Digital optical cord connection This connection sends an audio signal to the system from the TV To listen to TV sound via the system perform this connection With this connection the system receives a Dolby Digital multiplex broadcast signal and you can enjoy multiplex broadcast sound Note You can enjoy the TV sound by selecting the TV function page 30 If your TV does not have a di

BDV-E380

Contents

Download Pdf Manuals

Related Search

Related Contents