Untitled - ProMojeDite.cz
Contents
1. e The CONCORD NEO is suitable for children up to about 3 years of age and weighing not more than 15 kg The CONCORD NEO is only suitable for children under 6 months in conjunction with approved Concord accessories Only allow one child to sit or lie in the CONCORD NEO at a time The CONCORD NEO is not a child car seat Only transport your children in tested approved child seats Some Concord accessory products are fitted with adaptors suitable for the CONCORD NEO making it easy to attach them to the CONCORD NEO Make sure that the Concord accessory has engaged properly with the CONCORD NEO prior to use Never leave your child unsupervised Never let children play with the CONCORD NEO e Always use the safety belts when the child is sitting or lying in the CONCORD NEO e Any load that is attached to the handle of the CONCORD NEO such as bags limits the stability of the CONCORD NEO 28 e You should take the child out of the CONCORD NEO whenever you have to manoeuvre stairs or steep slopes The CONCORD NEO is not suitable for jogging or skating Never allow a child to stand on the connecting rods between the wheels of the CONCORD NEO This can damage the CONCORD NEO and impair its safety Before using the CONCORD NEO make sure that all fastening and locking devices are properly engaged and securely locked Check all the parts of the CONCORD NEO and the accessories used at regular intervals Make sure the child is not in2. the baby buggy before putting on or removing the cover or the approved Concord accessory Only use Concord original spare parts accessories The guarantee does not apply if the CONCORD NEO is damaged through excess strain incorrect usage or the use of other spare parts accessories Sunlight may cause a slight discoloration of parts of the CONCORD NEO Please avoid exposing the CONCORD NEO to extreme temperatures Throw away all plastic packaging immediately lt can put your child s life at risk 29 _ ATTACHING AND REMOVING THE BACK WHEELS You must attach the rear wheels before using the CONCORD NEO for the first time First remove the wheel cover To do so guide the axle through the hub from the inside of the wheel and push the cover off Now press the two rings at the end of the axle together and pull the axle out of the hub Guide the axle through the hub from the front of the wheel Press on the cover until it snaps into position C To attach the back wheel press and hold the pushbutton as you push the wheel onto the CONCORD NEO axle and let it click audibly into place To remove a back wheel press and hold the pushbutton 19 and pull the wheel off the axle 31 _ UNFOLDING AND FOLDING To set up the CONCORD NEO first release the transport lock 18 by pressing it downwards or backwards Then pull the handlebar 11 upwards until you hear it engage with a clear click To fold down the CONC
3. CONCORD A EO _ ENGLISH OVERVIEW THANK YOU PLEASE NOTE ATTACHING AND REMOVING THE BACK WHEELS UNNE DO INC ATTACHING AND REMOVING THE SEAT FRAME PROFIX SYSTEM SETTING THE SEAT ANGLE USING THE SAFETY BAR USING THE SUN SHADE ADJUSTING THE HANDLEBAR ADJUSTING THE FOOTREST USING THE HARNESSING SYSTEM USING THE PARKING BRAKE LOCKING THE FRONT WHEELS USING THE WIND PROTECTOR USING THE RAIN COVER PUTTING ON REMOVING AND LAUNDERING THE COVER CONCORD ORIGINAL SPARE PARTS ACCESSORIES GUARANTEE _ OVERVIEW 01 Sun shade 02 Handlebar unlocking button 03 Seat frame 04 Wind protector 05 Safety bar 06 ProFix A unlocking lever CN SN unlocking button SA 07 Footrest 08 Luggage net Vi SET Front wheel mo 1d AN lia lock Sy E Y lt 26 12 Adjustment handle 1 Unlocking lever with safety button 14 Safety bar 15 ProFix adapter 16 Footrest 0 unlocking button 17 Rain cover pocket 18 Transport lock 27 _ THANK YOU You have made a good choice with this Concord quality product You will be impressed by the versatility and safety of this product We hope you will have lots of fun with your new CONCORD NEO _ PLEASE NOTE IMPORTANT e Please read the instructions carefully before using the CONCORD NEO for the first time and retain them for future reference Failure to comply with the guidelines set out below can put the child s safety at risk WARNING
4. Concord GmbH IndustriestraBe 25 95346 Stadtsteinach Germany Phone 49 0 9225 9550 0 Fax 49 0 9225 9550 55 info concord de www concord de 45 _ GUARANTEE The guarantee begins on the day of purchase The guarantee period corresponds to the statutory warranty period in the end user s country concerned At the manufacturer s discretion the guarantee shall cover rectification replacement or a price reduction The guarantee is valid for the original purchaser only In the event of any defect claims can not be considered unless the specialist dealer is notified of the fault as soon as it occurs for the first time If the specialist dealer is unable to remedy the problem himself he must return the product to the manufacturers together with details of the complaint official proof of purchase and the purchase date The manufacturers assume no liability for faulty goods that they did not supply The guarantee does not apply where e the product has been modified e the product is not brought back to the specialist dealer complete with oroof of purchase within 14 days of the defect occurring e the defect was caused by improper usage or maintenance or due to anything else deemed to be the fault of the user in particular failure to comply with the instructions for use e repairs have been carried out on the product by third parties e the defect was caused as the result of an accident The guarantee makes no provision for an
5. ORD NEO first adjust the seat angle on the seat frame 03 to position P see ADJUSTING THE SEAT ANGLE The unlocking levers are located on To unlock press and hold the safety LR button on the inside of the right R unlocking lever 13 and pull both Ly unlocking levers upwards Now push the handlebar forwards down until the transport locking device engages the left and right of the handle Q NS 32 _ ATTACHING AND REMOVING THE SEAT FRAME PROFIX SYSTEM The CONCORD NEO is equipped with ProFix adapters 15 These adapters are used to attach the CONCORD NEO seat frame to the chassis You can secure the seat frame to the chassis so that it is either front or rear facing lo do this insert the seat frame from above into the receivers on the chassis and let it click audibly into place WARNING e Never seat your child in the seat frame until after you have secured the frame to the chassis e Before using the CONCORD NEO ensure that all fixing mechanisms and fastenings are properly locked in position and closed e Never remove the seat frame from the chassis while a child is sitting in it 33 To remove the seat frame from the chassis pull simultaneously on the right and left ProFix unlocking levers 06 on the seat frame and pull the frame upwards and away from the chassis Tip Various elements can be attached to the CONCORD NEO by means of the ProFix adapter Some Concord accessorles available from sp
6. ORD NEO s parking brake 10 push up the foot pedal on the left back wheel To release the parking brake push down the pedal on the left back wheel _ LOCKING THE FRONT WHEELS To locate the front wheels of the CONCORD NEO align the front wheels towards the back and slide the locking button 09 from the outside inwards To release the wheels slide the locking button from the inside to the outside 42 _ USING THE WIND PROTECTOR The CONCORD NEO is equipped with an integrated wind protector 04 To use it undo the zip on the safety bar and stretch the wind protector across the footrest 43 _ USING THE RAIN COVER The rain cover for the CONCORD NEO is located in the pocket 1 7 underneath the seat frame It is secured to the sun shade by means of the Zip 44 _ PUTTING ON REMOVING AND LAUNDERING THE COVER The different parts of the cover of the CONCORD NEO are joined to each other by means of press studs Velcro and zip fasteners and are attached to the rods If you wish to remove the cover first loosen all these fastenings Make sure all the fasteners and connections are done up safety when you put the cover on You can wipe all parts of the cover as well as the rods and the plastic parts of the CONCORD NEO with a damp cloth _ CONCORD ORIGINAL SPARE PARTS ACCESSORIES Information on Concord original spare parts accessories is available at your retailer s or directly from Concord
7. adjusted to seven different positions To do this release the positioning mechanism by pressing both the unlocking buttons 02 on the left and right of the handlebar and move the bar until it engages in the next position You can adjust the footrest 07 to five different positions To do this simultaneously press the left and right unlocking buttons 16 Then adjust the footrest until it engages in the required position _ USING THE HARNESSING SYSTEM Feed the centre strap with the buckle between the child s legs Then insert the buckle adaptors on the shoulder and waist straps from above into the top of the buckle They should click audibly into position To open the harness system press the button in the middle of the buckle until the buckle adaptors are released 40 Shoulder strap Waist strap Centre strap Take care that your child is always strapped in with the buckle fastened whenever you go out with the pushchair Adjust the straps so that they are taut and lie close against the child To adjust the strap length slide the strap clasps up or down Check that the straps are not twisted The childproof lock is on the back of the buckle This can be activated and deactivated by turning Activating the childproof lock locks the buckle opening mechanism WARNING e Always use the shoulder and waist straps together with the centre strap 41 _ USING THE PARKING BRAKE To activate the CONC
8. ecialist retailers are equipped with adapters suitable for the CONCORD NEO making it easy to attach them to the CONCORD NEO Check before use that the Concord accessory has engaged properly in the CONCORD NEO Please also refer to the instructions for use enclosed with the relevant Concord accessory NOA TA N 34 _ SETTING THE SEAT ANGLE You can set the seat frame angle of inclination to several positions To do this pull the adjustment handle 12 on the top edge of the seat frame and adjust the seat angle until it engages in the required position WARNING e An additional position P allows the CONCORD NEO to be folded down extra compactly but it must be used solely for this purpose and never for transporting a child 35 _ USING THE SAFETY BAR The safety bar 14 on the CONCORD NEO engages in the receivers provided for this purpose in the seat frame You can open the safety bar on both sides or just on one To do this press the relevant unlocking buttons 05 on the left and right of the seat frame _ USING THE SUN SHADE To secure the CONCORD NEO sun shade 01 onto the seat frame push it from above onto the relevant plastic receivers on the seat frame Then join the zip on the inside of the sun shade to the seat cover To remove the sun shade undo the zip and pull the sun shade upwards and away from the seat frame _ ADJUSTING THE HANDLEBAR _ ADJUSTING THE FOOTREST The handlebar can be
9. y alteration or deterioration to the product that is incurred through normal usage wear and tear The period of guarantee shall not be extended by any remedial measures carried out by the manufacturers in the event of a claim 46 _ DEUTSCH _ ENGLISH _ FRANCAIS _ ESPA OL _ ITALIANO _ PORTUGU S _ NEDERLANDS _ MAGYAR _ ESKY _ NORSK _ DANSK _ SLOVENSKO _ POLSKI _ T RK E _ SLOVENSKY _ HRVATSKI Concord GmbH Industriestra e 25 95346 Stadtsteinach Germany Phone 49 0 9225 9550 0 Fax 49 0 9225 9550 55 infoOconcord de www concord de Einbau und Bedienungsanleitung Instructions for attachment and use Directives d installation et mode d emploi Instrucciones de montaje y de uso Istruzioni per l uso e il montaggio Manual de montagem e de utilizac o Inbouw en bedieningshandleiding Beszerel si s kezel si tmutat N vod k mont i a obsluze Bruksanvisning og monteringsveiledning Monterings og betjeningsvejledning Navodila za vgradnjo in uporabo Instrukcja monta u i obs ugi Montaj ve Kullanma K lavuzu N vod na mont a obsluhu Naputak za monta u i uporabu N e N e W Z
Download Pdf Manuals
Related Search