Siemens SX1
Contents
1. 2 Choose and Open an entry you want to make a voice dial 3 Under the selected entry highlight the phone number and press Options Add voice tag 4 Follow the instructions displayed on screen Note You may use any word s or just use the person s name for a voice tag 5 Wait until the word s is repeated and automatically saved by the phone 6 Continue pressing 7 until you finally Exit Note Record a voice in quiet environment Voice tags are sensitive to loud background noise 662. phone number by simply saying a word First you have to refer to section i for procedure in recording for voice dialing 1 Shortly press the Answer Button to activate voice dialing 2 A beep will then be heard on the Handsfree kit prompting the user to say a voice name voice tag of the person to call 3 Say a voice name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above maybe repeated 4 Press the Hang Up Button to terminate the call Redialing Make a long press on the Answer Button to redial the last number AUDIO TRANSFER Audio Transfer can be done during an ongoing call 1 Just shortly press the Answer Button to transfer audio from Handsfree kit to mobile phone or vice versa 2 It can also be done using your phone Press Options Activate Handset or BT Handsfree on REJECTING A CALL Shortly press the Hang Up Button to reject an incoming call SETTING THE VOLUME Adjust the Volume Control of the Handsfree kit during an ongoing call 1 Turn it clockwise to increase the volume 2i Decrease the volume by turning it counter clockwise Note If the volume set is too high it can cause feedback whistling sound echo or background noise during calls RECORDING FOR VOICE DIALING Note Voice dialing entries must be stored in the phone s memory not on the SIM card 1 Press Menu Key 9 Y gt Contacts
3. USING WITH SIEMENS SX1 ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your mobile phone to establish Bluetooth connection between it and other Bluetooth devices Press Menu key 0 gt Setup gt Bluetooth 1 2 is highlighted Press Options gt Change 3 Choose On and press Ok 4 Continue pressing 24 until you finally Exit PAIRING TO THE CELLULAR PHONE not possible charging the Handsfree Kit 1 Bring the cellular phone at about 20 cm from the Hands free Kit 2 Turn off the Hands free Kit and wait for about 4 seconds 3 While pressing the Answer Button turn ON the Hands free Kit by sliding the Power Switch to the right Keep the Answer Button pressed for approximately 10 seconds until you hear a distinctive tone and the Bluetooth indicator LED changes from blinking blue to alternate blinking red and blue The Hands free Kit is now in pairing mode 4 Press Menu key 5 Setup Bluetooth 5 Bluetooth es will be displayed 6 Sway the joystick to the left to open Paired devices window 7 Press succeedingly Ce button for Options New paired device The phone will then start to search for other Bluetooth devices until it displays them in the list Select the device you want to connect with your phone 9 Enter 0000 as the passcode and press OK 10 Highlight the paired device press Options and choose Connect The statement Connected to appears 11 Continue pressing 2 4 until y
4. ou finally Exit The Hands free Kit is paired and ready to use Notes You only have to do the pairing process once for a particular phone You will only redo the process if you want to pair it with another mobile phone If you turn off your Hands free kit it will disconnect with your phone If you turn it back on just shortly press the Answer Button A question Accept connection request from will be displayed Press Yes to reconnect AUTO ACCEPT MODE 1 Press Menu key 5 gt Setup Bluetooth 2 _ Bluetooth cme is highlighted 3 Sway the joystick to the right to view Paired devices window 4 Choose the name of this hands free kit and press Options Set as authorised 5 A statement Connections will take place without confirmation Continue appears Press Yes 6 Continue pressing 24 until you finally Exit ANSWERING RECEIVING A CALL When the phone is receiving a call ring tone will be heard on the phone and on the Hands free Kit 1 Shortly press the Answer Button to answer the call 2 Shortly press the Hang Up Button to end the call Note Cell phone buttons can also be used to answer a call but audio will still be heard on the Hands free Kit 65 MAKING A CALL with the Hands free Kit on Normal dialing 1 Enter the contact number and shortly press Call key Audio will be on the Handsfree Kit 2 Shortly press the Hang Up Button to terminate a call Voice Dialing You can dial a
Download Pdf Manuals
Related Search