GE DNCD450EA Electric Dryer
Contents
1. Installation instructions Vision lmpaired for your new Washer Dryer Kit For Washer WNCD2050 and Dryer DNCD450 Before you begin Read these instructions completely and carefully IMPORTANT OBSERVE ALL GOVERNING CODES AND ORDINANCES Note to Installer Be sure to leave these instructions with the Consumer Note to Consumer Keep these instructions with your Owner s Manual for future reference Parts Included Removing the Old Button Overlay e Washer and Dryer Overlays 1 Unplug the washer or dryer e Braille Reference Keys 2 washer 2 dryer 2 Carefully peel the old button overlay from the control panel using a tape tipped putty knife if necessary Make sure that excess adhesive is removed from the control panel Keep the old overlay handy as a reference e Use and Care Audio Tape Tools Needed e Tape tipped putty knife optional Braille Reference Keys The Braille reference keys included in the kit explain the operation of the washer and dryer Place the Left key on the left side and the Right key on the right side of the control panel NOTE Make sure the protective film is removed from the washer or dryer control panel before applying the reference keys Printed in the United States 175D1807P392 49 90129 02 02 JR Applying the Braille Overlay 1 Plug the washer or dryer back in 2 For washers Using the old overlay as a reference press and hold the White Cottons button in the upper left corner and the Start b2. utton in the upper right corner of the control panel After 3 seconds all lights on the control panel will light up For dryers Using the old overlay as a reference press and hold the Air Dry button in the lower left and the High heat button in the upper right of the control panel After 3 seconds all lights on the control panel will light up Peel the paper backing from the Braille overlay Starting on one side of the panel apply the Braille overlay over the buttons using the lights for alignment If the overlay does not line up properly so all lights are visible through the overlay peel it off and reapply Once the overlay is properly aligned press firmly around the border to secure it in place Once the overlay is applied press STOP CANCEL to turn off the control panel lights
Download Pdf Manuals
Related Search