Speco Technologies VL7038IRVF Camcorder User Manual
Contents
1. AGC AUTO GAIN CONTROL The higher the gain level the brighter the screen but the higher the noise OFF Deactivates the AGC function LOW Allows automatic gain control from 5 3dB to 32dB HIGH Allows automatic gain control from 5 3dB to 37dB SENS UP When it is night or dark the camera automatically detects the light level and maintains a clear picture if this mode is activated OFF Deactivates the SENS UP function AUTO Activates the SENS UP function RETURN Select this to save the changes in the EXPOSURE menu and return to the SETUP menu gt NOTE If you press the Function Setup switch to AUTO mode you can adjust brightness by increasing or decreasing the shutter speed x2 x512 Note that the higher the zoom level the brighter the screen but the more likely there Will be a ghosting effect It is normal for Noise Spots and Whitish symptoms to appear in SENS UP mode when the D ZOOM level is increased White Balance White Bal Setting Use the White Balance function to adjust the screen color 1 When the SETUP menu screen is displayed select White Bal by using the Function Setup switch so that the arrow indicates White Bal 2 Select a desired mode using the Function Setup switch MAIN SETUP 1 LENS DC H 2 EXPOSURE 41 gt 3 WHITE BAL ATW Select of the following 5 modes as appropriate for your purpose ATW Select this when the co2. DEFECTS IN MATERIAL AND WORKMANSHIP FOR THE FOLLOWING PERIOD FOR PARTS AND LABOR SPECO TECHNOLOGIES CAMERAS 5 YEARS pDce 3 YEARS SPECO TECHNOLOGIES IP CAMERAS 2 YEARS NYRS wszawicy arsi teas Lad n Eni 3 YEARS SPECO PTZ AND VL CAMERAS 1 YEAR BALANCE OF SPECO TECHNOLOGIES MONITORS 1 YEAR SPECO TECHNOLOGIES LINE 1 YEAR IRLEDS 90 DAYS SPECO TECHNOLOGIES WILL REPAIR OR REPLACE AT OUR DISCRETION ANY PARTS FOUND TO BE DEFECTIVE FOR THE WARRANTY PERIOD SPECIFIED WE WILL PROVIDE A REPLACEMENT FOR ANY DEFECTIVE PART CONDITIONS 1 YOU MUST OBTAIN A RETURN AUTHORIZATION RA NUMBER FOR ANY MERCHANDISE BEING RETURNED TO SPECO TECHNOLOGIES WHETHER FOR RETURN EXCHANGE OR REPAIR WHETHER IN OR OUT OF WARRANTY THIS WARRANTY WILL BE HONORED ONLY UPON PRESENTATION OF THE ORIGINAL DATED BILL OF SALE OR SALES SLIP TRANSPORTATION OF THE PRODUCT TO OUR SERVICE DEPARTMENT IS THE RESPONSIBILITY OF THE USER REPAIRED OR REPLACED PRODUCT WILL BE RETURNED PREPAID DURING THE WARRANTY PERIOD 4 SPECO TECHNOLOGIES DOES NOT AUTHORIZE ANY INTERNET OR MAIL ORDER PRODUCT SALES IF A SPECO TECHNOLOGIES PRODUCT IS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR OR OTHER SOURCE INCLUDING RETAILERS MAIL ORDER SELLERS AND ONLINE SELLERS IT WILL NOT BE HONORED OR SERVICED UNDER THE EXISTING SPECO TECHNOLOGIES WARRANTY POLICY ANY SPECO TECHNOLOGIES PRODUCT PURCHASED FROM THE
3. select IMAGE ADJ by using the Function Setup switch so that the arrow indicates IMAGE ADJ 2 Select a desired mode using the Function Setup switch IMAGE SETUP gt 1 V REV 2 H REV OFF 3 D ZOOM OFF 4 COLOR WHITE 5 SHARPNESS ON 6 MONITOR LCD 4 7 RETURN H V REV You can flip the picture vertically on the screen H REV You can flip the picture horizontally on the screen D ZOOM You can use a digital zoom of x1 x16 FONT COLOR You can change the OSD font color White Yellow Green Red Blue SHARPNESS As you increase this value the picture outline becomes stronger and clearer Adjust this value appropriately depending on the sharpness of the picture MONITOR Please change the settings value of video appropriate to your monitor LCD Please select this menu item when using a LCD monitor CRT Please select this menu item when using a CRT monitor USER Please use this menu item when using a monitor other than standard ones You can change the gamma PED level and color gain in the sub menus RETURN Select this to save the settings for the IMAGE ADJ menu and to return to the SETUP menu 22 gt NOTE When the V REV or H REV mode is enabled the text on the screen does not If vou increase the SHARPNESS level too high the picture become distorted or noise appear CAM TITLE If you enter a title the title will appear on the
4. Programmable Zones On Off Level adjustable On Off 1 x16 On Off On Off Level adjustable On Off DC 12V AC24V Dual Voltage DC 12V 220mA CDS OFF 700mA CDS ON Heater ON Adj 220 700mA AC 24V 150mA CDS OFF 450mA CDSON Heater ON Adj 170 450mA DC Auto Iris Varifocal Lens 2 8mm 12mm 131 ft 140 F RH 95 Max 140 F RH 95 Max 5 31 W 3 74 H 11 57 D 3 96 Ibs Dav Night Weather proof Bullet Camera DC Auto Iris Varifocal Lens 6mm 50mm IR LED Built in 63pcs SPECIFICATIONS _ MODEL Image Pick Up Device TV System Total Pixels Effective Pixels Scanning Frequency Scanning System Synchronization Resolution Minimum Illumination S N Ratio Video Output Electronic Shutter Speed OSD SSDR BLC Day 8 Night Gain Control White Balance SENS UP Motion Detection Privacy Masking SSNR III Digital Noise Reduction Digital Zoom DIS Digital Image Stabilizadion Sharpness Filp Mirror Power Supply Power Consumption Lens IR Distance Operational Temp Storage Temp Dimension Weight VL7039IRVF 600 Lines DC Auto Iris Varifocal Lens 6mm 50mm True Day Night Capability ICR IR Cut Filter Removable 850nm IR LEDs 63pcs VL7039IRVF 1 3 Sony Super HAD II CCD NTSC PAL NTSC 811 H 508 V PAL 795 H 596 V NTSC 768 H 494 V PAL 752 H 582 V NTSC 15 734KHz H amp 59 94Hz V PAL 15 625KHz H amp 50 00Hz V
5. Setup switch Then you can adjust the noise reduction level i NOTE m You cannot set the DNR3 to ON or OFF when the AGC mode of the EXPOSURE menu is OFF s When adjusting the noise reduction level the DNR3 mode remember that the higher the level set the more the noise level will be reduced as will the brightness of the image Day Night Setting You can display pictures in color or black and white 1 When the SETUP menu screen is displayed select DAY NIGHT by using the Function Setup switch so that the arrow indicates DAY NIGHT MAIN SETUP 1 LENS pc lt 2 EXPOSURE lt 3 WHITE BAL 4 SSNR 5 BACKLIGHT 6 DNR3 gt 7 DAY NIGHT 8 SPECIAL 4 9 2 desired mode using the Function Setup Switch according to the picture displav vou want COLOR The picture is alwavs displaved in color B W The picture is always displayed in black and white BURST MODE You can turn on or off the burst signal on B W mode R MODE When IR LED is turned on in B W the objects can be clearly identified due to the function that decreases screen saturation of objects within a short distance TOP BOTTOM LEFT RIGHT Adjust the range according to B W MODE SETUP the location of objects gt 1 BURST MODE IR LEVEL Select LOW when objects appears within a 2 IR MODE 3 IR LEVEL 4RETURN lt short distance or select HIGH when objects appear within a long distance on the
6. screen 20 AUTO The mode is switched to Color in a normal environment but switches to B W mode when ambient illumination is low To set up the switching time for AUTO mode press the Function Setup switch You can turn on or off the burst signal on B W mode AUTO SETUP BURST MODE You can turn on or off the burst signal gt 1 BURST MODE on mode 2 COLORSB W DURATION You can select brightness of illumination DURATION bout changing the day night mode ipee aS as risas 3 BIW COLOR DWELLTIME You can select the duration time about DURATION changing the dav night mode DWELL TIME 4RETURN lt gt 35 5s 76 105 155 205 30s 40 605 The day night switching point of the camera can be adjusted When AGC in the EXPOSURE menu is OFF mode operates as like selecting COLOR mode and AUTO mode can not be selected Special Setting 1 When the SETUP menu screen is displayed select SPECIAL by using the Function Setup switch so that the arrow indicates SPECIAL MAIN SETUP 1 LENS Dc 4 2 EXPOSURE lt 3 WHITE BAL 4 SSNR OFF 5 BACKLIGHT 6 DNR3 7 DAY NIGHT p 8 SPECIAL 4 9 21 2 Select desired mode using the Function Setup switch SPECIAL gt 1 IMAGE ADJ 4 2 CAM TITLE OFF 3 SYNC INT 4 MOTION DET OFF 5 PRIMACY OFF 6 DIS OFF 7 COMM ADJ H 8 LANGUAGE ENGLISH 9 RETRUN H IMAGE ADJ 1 When the SETUP menu screen is displayed
7. to provide clear images even in dark environments Q Day amp Night This camera has a function that automatically selects the mode that is appropriate for daytime or night time conditions The COLOR mode operates in daytime conditions to provide optimum colors and BW mode operates in night time conditions to enhance the definition of the image Q SSNR For images with high contrast between bright and dark Areas from difficult lighting conditions such as backlighting this camera selectively illuminates darker Areas while retaining the same light level for brighter Areas to even out the overall brightness Q Miscellaneous Functions HLC High Light Compensation SENS UP FLIP H V REV D ZOOM SHARPNESS MOTION DETECTION and PRIVACY functions are provided 9 Disk Saving Effects Up most and advanced DNR technology camera picture quality has a disk saving effects due to Image sizes are smaller than standard CCTV camera image Q Controlled by OSD Menu The camera can be controlled by selecting the menu text displayed on the monitor screen 12 OSD Control Button 1 A Type C of OSD button could be used when it needs to OSD control 2 Type D is extra Option wired Remote controller Type A Type B ZE RENE SEFUP UP DOWN LEFT RIGHT DOWN Type C Type D Option l DOWN A Up button Moves the cursor upwards Use this button to select an item or adjust the parameters Y Do
8. 2 1 Interlace Internal 600TV Lines CDS OFF 0 15 Lux CDS ON 0 00002 Lux More than 52dB CVBS 1 0Vp p 750 NTSC 1 60sec 1 120 000sec PAL 1 50sec 1 120 000sec Available On Off Level adjustable BLC HLC OFF Color BW AUTO EXT Low High Off ATW Outdoor Indoor Manual AWC 1 700 K 11 000 K Auto Off Selectable x2 x512 On Off 8 Programmable Zones On Off 12 Programmable Zones On Off Level adjustable On Off 1 x16 On Off On Off Level adjustable On Off DC 12V AC24V Dual Voltage DC 12V 220mA CDS OFF 700mA CDS ON Heater ON Adj 220 700mA AC 24V 150mA CDS OFF 450mA CDS ON Heater ON Adj 170 450mA DC Auto Iris Varifocal Lens 6mm 50mm 131 ft 140 F RH 95 Max 140 F RH 95 Max 5 31 W 3 74 H 11 57 D 3 96 Ibs 10 CAMERA DIMENSION 1 VL7038IRVF VL7039IRVF General Features Q Ultra High Sensitivitv The built in high sensitivity COLOR CCD produces a clear image even in OLux B W IR LED ON or lower illumination 600TV Lines By adopting a diagonal 6mm 1 3 410 000 NTSC pixel 470 000 PAL pixel SONY CCD the camera produces clear picture quality with a horizontal resolution of 600 TV lines for color and a horizontal resolution of 700TV lines for BW mode DNR3 The high performance W V DSP chip effectively removes low light gain noise and ghosting
9. 4EA Dav Night Weather proof Bullet Camera DC Auto Iris Varifocal Lens 2 8mm 12mm IR LED Built in 63pcs SPECIFICATIONS _ MODEL Image Pick Up Device TV System Total Pixels Effective Pixels Scanning Frequency Scanning System Synchronization Resolution Minimum Illumination S N Ratio Video Output Electronic Shutter Speed OSD SSDR BLC Day 8 Night Gain Control White Balance SENS UP Motion Detection Privacy Masking SSNR III Digital Noise Reduction Digital Zoom DIS Digital Image Stabilizadion Sharpness Filp Mirror Power Supply Power Consumption Lens IR Distance Operational Temp Storage Temp Dimension Weight VL7038IRVF 600 Lines DC Auto Iris Varifocal Lens 2 8mm 12mm True Dav Night Capabilitv ICR IR Cut Filter Removable 850nm IR LEDs 63pcs VL7038IRVF 1 3 Sony Super HAD II CCD NTSC PAL NTSC 811 H 508 V PAL 795 H 596 V NTSC 768 H 494 V PAL 752 H 582 V NTSC 15 734KHz H amp 59 94Hz V PAL 15 625KHz H amp 50 00Hz V 2 1 Interlace Internal 600TV Lines CDS OFF 0 15 Lux CDS ON 0 00002 Lux More than 52dB CVBS 1 0Vp p 750 NTSC 1 60sec 1 120 000sec PAL 1 50sec 1 120 000sec Available On Off Level adjustable BLC HLC OFF Color BW AUTO EXT Low High Off ATW Outdoor Indoor Manual AWC 1 700 K 11 000 K Auto Off Selectable x2 x512 On Off 8 Programmable Zones On Off 12
10. BLC to adjust the area to Select BLC to adjust the area to be enhanced then adjust the level be enhanced then adjust the level BLC SETUP SETUP gt LEVEL gt LEVEL MIDDLE MOM LIMITS NIGHT ONLY MASK COLOR BLACK LEFT UMO MASK TONE 1 RIGHT MOTO 5 BOTTOM INTI TITTI LUM 120 LEFT UO 5 RIGHT 172 Press Set to Return Press Set to Return ie NOTE u Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen optimize the installation angle for the best HLC performance When dark the HLC is only activated when a bright light exceeding a specific size in NIGHT ONLY mode The HLC is not activated in day light or when bright light is not present at night in NIGHT ONLY mode BLC Function doesn t work in the B W mode of the DAY NIGHT menu DNR3 Setting This function reduces the background noise in a low luminance environment 1 When the SETUP menu screen is displayed select DNR3 by using the Function Setup switch so that the arrow indicates DNR3 MAIN SETUP 1 LENS Dc 2 EXPOSURE 41 3 WHITE BAL 4 SSNR OFF 5 BACKLIGHT gt 6 DNR3 7 DAY NIGHT 8 SPECIAL 4 9 2 Select desired mode using the Function Setup switch OFF Deactivates DNR3 Noise is not reduced ON Activates DNR3 so that noise is reduced 3 Set the DNR3 mode to and press the Function
11. HIS PRODUCT OR FORANY DELAY IN THE USE OF THIS PRODUCT DUE TO CAUSES BEYOND OUR CONTROL SOME STATES DO NOT ALLOW LIMITATIONS OF HOW LONG AN IMPLIED WARRANTY LASTS AND OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES THE ABOVE LIMITATIONS ON IMPLIED WARRANTY AND CONSEQUENTIAL DAMAGES MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE NOTE FOR YOUR PROTECTION IN THE EVENT OF THEFT OR LOSS OF THIS PRODUCT PLEASE FILL IN THE INFORMATION REQUESTED BELOW AND RETAIN WITH YOUR SALES RECEIPT N MODEL NO SERIALNO LOCATED ON BACK OR BOTTOM OF UNIT DATE OF PURCHASE WHERE PURCHASED PURCHASE PRICE Speco Technologies 200 New Highwav FOR MORE INFORMATION REGARDING SERVICE OR RETURN Amitvville NY 11701 CALL US TOLL FREE 1 800 645 5516 IN METRO NY 631 957 8700 www specotech com ALWAYS USE DISCRETION WHEN INSTALLING VIDEO AND OR AUDIO SURVEILLANCE EQUIPMENT ESPECIALLY WHEN THERE IS AN EXPECTATION OF PRIVACY INQUIRE REGARDING FEDERAL STATE AND OR LOCAL REGULATIONS APPLICABLE TO THE LAWFUL INSTALLATION OF VIDEO AND OR AUDIO RECORDING OR SURVEILLANCE EQUIPMENT PARTY CONSENT MAY BE REQUIRED 28 00 29 30 31 CHE speco Technologies 200 New Highway Amityville NY 11701 631 957 8700 1 800 645 5516 WWW Specotech com
12. INSTRUCTION MANUAL DNR Bullet Dav Night Weather proof Camera VL7038IRVF VL7039IRVF LL speco technologies Rev 6 20 2012 Speco Technologies is constantly developing product improvements We reserve the right to modify product design and specifications without notice and without incurring any obligation Contents Precautions Q Safety Instructions Q Package Contents Q Camera Installation Q Specifications Q Camera Dimension Features OSD Menu Details Q Trouble Shooting Precautions Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of the where temperatures are between cause the camera to work improperly camera Be careful not to leave 109 and 50 C Be especially careful to provide fingerprints on the lens cover ventilation when operating under high temperatures It can cause malfunctions to occur Housing damage can compromise If exposed to radioactivity the CCD wheatherproof ratings will fail CAUTION RISK OF ELECTRIC SHOCK DO OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 15014001 FG The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may b
13. SE ONLINE MERCHANTS WILL VOID THE APPLICABLE WARRANTY AND IS INELIGIBLE FOR TECHNICAL SUPPORT IF YOU HAVE QUESTIONS ABOUT A RESELLER PLEASE CONTACT SPECO TECHNOLOGIES AT 1 800 645 5516 FORALIST OF UNAUTHORIZED DEALERS VISIT www specotech com unauthorized DN EXCLUSIONS 1 THIS WARRANTY SHALL NOT COVER ADJUSTMENT OF CUSTOMER OPERATED CONTROLS AS EXPLAINED IN THE APPROPRIATE Model s INSTRUCTION MANUAL OR PRODUCTS WHICH HAVE BEEN ALTERED ABUSED OR HAVE MISSING OR ALTERED SERIAL NUMBERS THIS WARRANTY SHALL NOT APPLY UNCRATING SETUP INSTALLATION OR THE REMOVAL AND REINSTALLATION OF PRODUCTS AFTER REPAIR THIS WARRANTY SHALL NOT APPLY TO REPAIRS OR REPLACEMENTS NECESSITATED BY ANY CAUSE BEYOND THE RESULT OF MANUFACTURE INCLUDING BUT NOT LIMITED TO ANY MALFUNCTION DEFECTS OR FAILURE CAUSED BY OR RESULTING FROM UNAUTHORIZED SERVICE OR PARTS IMPROPER MAINTENANCE MODIFICATION OR REPAIR BY THE USER ABUSE MISUSE NEGLECT ACCIDENT FIRE FLOOD OR OTHER ACTS OF NATURE INCORRECT LINE VOLTAGE DAMAGE OR IMAGE BURNS TELEVISION PICTURE TUBES CAUSED BY OR ATTRIBUTABLE TO THE USE OF ACCESSORY ELECTRONICS GAME OR DEVICE OR DAMAGE CAUSED TO IMAGE PICKUP DEVICES BY EXCESSIVE LIGHT THE FOREGOING IS IN LIEU OF ALL OTHER EXPRESSED WARRANTIES AND WE DO NOT AUTHORIZE ANY PARTY TO ASSUME FOR US OTHER OBLIGATION OR LIABILITY IN NO EVENT SHALL WE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF T
14. creen when movement is detected Activity can be monitor more efficiently 1 When the SPECIAL menu screen is displayed press the Function Setup switch so that the arrow PRIVACY Mask an area you want to hide on the screen 24 1 When the SPECIAL menu screen is displaved press the Function Setup switch so that the arrow indicates PRIVACY 2 Set up the mode using the Function Setup switch AREA You can select up to 12 PRIVACY areas MODE Determines whether to use the area selected in the AREA MASK COLOR Determine area color You can select Green Red Blue Black White Gray MASK TONE Adjust the brightness of MASK COLOR TOP BOTTOM LEFT RIGHT Adjust the size and position of the selected area RETURN Select this to save the PRIVACY menu settings and return to the SPECIAL menu DIS Digital Image Stabilizer This function mitigates any picture movement due to external factors such as wind i NOTE As the DIS function uses the digital zoom the camera s resolution will decrease DIS doesn t operate when background illumination is too low DIS doesn t operate when object pattern is monotonic as like sky or white wall COMM ADJ Communication Adjustment This function sets up the camera communication status when controlling the camera through an external control device 1 When the SPECIAL menu screen is displayed press the Function Setup switch so that the arrow indicat
15. e SETUP menu screen is displaved select SSNR bv using the switch so that the arrow indicates SSNR 2 Use the switch to change the SSNR level according to the contrast between bright and dark areas 17 e Backlight Setting Unlike conventional cameras the SIR 4160 is designed to deliver a distinctive subject and background at the same time even when the subject is backlight bv using the features of the proprietarv W V DSP chip 1 When the SETUP menu screen is displaved select BACKLIGHT bv using the Function Setup switch so that the arrow indicates BACKLIGHT MAIN SETUP 1 LENS DC lt 2 EXPOSURE 41 3 WHITE BAL 4 SSNR OFF gt 5 BACKLIGHT 6 DNR3 7 DAY NIGHT 8 SPECIAL 4 9 2 Select desired mode using the Function Setup switch BLC Enables a user to directly select a desired area from a picture and to view the area more clearly HLC High Light Compensation If the scene contains extremely bright light areas such as from car headlights the light can mask out much of the on screen detail LEVEL Adjust level of the HLC function LIMIT Enable to change the operating condition MASK COLOR TONE Change the color transparency of the masking area Black Red Blue Cyan Magenta TOP BOTTOM LEFT RIGHT Adjust the area to be enhanced OFF Not being used 2 Select a desired mode using the Function Setup switch and press the Function Setup switch Select
16. e no user serviceable parts inside Q Do not disassemble this camera other than to make initial adjustments Use a UL approved regulated 24 volt AC or 12 volt DC power supply Q Use appropriate low voltage power cable to prevent fire or electrical shock Q Please insure that your installation area can support the weight of the camera Please handle this camera carefully Q Do not use a strong or abrasive detergent when cleaning the camera Q Do not install near cooling or heating device Contents Please make sure that the following items are included the Package 1 VL7038IRVF VL7039IRVF e 1 Video Test Connector Power Jack e 1 3Axis Bracket Round Base Adaptor e 2 Wrenches e Set Screw 4Tapping Screws 4x25 4 Hexagon Socket Screws M5x15 CAMERA INSTALLATION CONNECT POWER CABLE 1 WHEN USING 12 VOLTS DC constant voltage 500 mA Power Input RED gt lt m B Center DC 12V Power Supply 2 WHEN USING 24 VOLTS AC 40 Volt Amps _ ACAN AC 24V Gas 1 i BLACK 3 Power Supply 3 CONNECT VIDEO CABLE CONNECT BNC CABLE TO THE BNC JACK L N CAMERA INSTALLATION Compatibilitv 1 VL7038IRVF VL7039IRVF INTJBS CAMERA INSTALLATION 1 VL7038IRVF VL7039IRVF WALL 3AXIS BRACKER ROUND BASE ADAPTOR TAPPING SCREW 4X25 4 HEXAGON SOCKET SCREW M5X15
17. e of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device pursuant to part 15 of the FCC Rules amp CE Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and radiate radio frequencv and if not installed and used in accordance with the instruction manual mav cause harmful interference to radio communications Operation of this equipment in a residential area is likelv to cause harmful interference in which case the user will be required to correct the interference at their own expense WARNING Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment CAUTION To prevent electric shock and risk of fire hazards Do NOT use power sources other than those specified This installation should be made by a qualified service person and should conform to all local codes Safetv Instructions Precautions for use Q This camera should be installed by qualified personnel only Q There ar
18. es COMM ADJ 2 Set up the mode using the Function Setup witch CAM ID Determines the camera s identification number between 0 and 255 BAUD RATE You can select 2400 4800 9600 19200 38400 57600 bps UART MODE You can select NONE EVEN or ODD for the parity bits RET PKT Determines whether to send a command back to the controller device when a communication control command is sent to the camera DISP ID Display camera title on top left corner of the screen PROTOCOL You can select one of various protocols STW SPD PELCO P PELCO D VICON PANASONIC BOSCH HONEYWELL SEC Initial value of communication adjustment Item Camera ID BAUD RATE UART MODE PET PKT Initial value 1 9600 8 NONE 1 ENABLE 25 LANGUAGE Vou can select the menu language according to vour requirements RETURN Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu e Exit Setting Select a desired EXIT mode using the Function Setup Switch SAVE Save the current settings and exit the MAIN SETUP menu NOT SAVE Do not save the current settings and exit the MAIN SETUP menu RESET Resets the camera settings to the factory defaults Language Communication and Monitor Settings are not initialized 26 e Trouble Shooting PROBLEM POSSIBLE CAUSE Northing appears on Check the power cable power supply output and video the screen connection between the ca
19. es LENS 2 DC You can adjust the minimum shutter and maximum value of ESC shutter mode MAIN SETUP gt 1 LENS DC lt 2 EXPOSURE 41 3 WHITE BAL ATW 3 THE Lens mode has sub menu items as listed below BRIGHTNESS Adjusts the video brightness 14 FOCUS ADJ To adjust the DC lens focus correctly you must activate the Focus Settings mode under each lens menu Activate the Focus Settings mode adjust the lens focus and then deactivate the settings mode rz NOTE If color rolling occurs when using a DC lens set Shutter to Fixed e Exposure Setting MAIN SETUP 1 LENS DC lt 2 EXPOSURE 41 3 WHITE BAL ATW 1 When the SETUP menu screen is displaved select EXPOSURE bv using the Function Setup Switch 2 Select a desired mode using the Function Setup switch EXPOSURE SETUP 1 BRIGHTNESS 25 2 SHUTTER 3 AGC HIGH 4 SENS UP OFF 5 RETURN 4 SHUTTER You can select either auto or manual shutter Shutter speed is fixed at 1 60sec 1 50sec ESC Select this to control the shutter speed automatically If ESC is selected the shutter speed is automatically controlled depending on the ambient illumination of the subject MANUAL You can control shutter speed manually NTSC MODEL 1 60 1 120 000 PAL MODEL 1 50 1 120 000 A FLK Select this when you see picture flicker this can happen when the frequency of the local lighting clashes with the camera
20. lor temperature is between 1 700 K and 11 000 K OUTDOOR Select this when the color temperature is between 1 700 K and 11 000 K sodium light inclusion INDOOR Select this when the color temperature is between 4 500 K and 8 500 K MANUAL Select this to fine tune White Balance manually Set White Balance first by using the ATW or AWC mode After that switch to MANUAL mode fine tune the White Balance and then press the Function Setup switch AWC SET To find the optimal luminance level for the current environment point the camera towards a sheet of white paper and press the Function Setup switch If the environment changes readjust it ie NOTE White Balance may not work properly under the following conditions In this case select the AWC mode When the color temperature of the environment surrounding the subject is out of the control range e g clear sky or sunset When the ambient illumination of the subject is dim 9 If the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically the White Balance operation may become unstable SSNR Setting SSNR illuminates darker spots of an image while retaining the same light level for brighter spots to even out the overall brightness of images with high contrast between bright and dark spots MAIN SETUP 1 LENS DC lt 2 EXPOSURE 41 3 WHITE BAL ATW gt 4 SSNR OFF 1 When th
21. mera and monitor Are the camera lens or the lens glass dirty Clean the lens glass with a soft clean cloth The image on the Adjust the monitor controls as required screen is dim is f the camera is facing a very strong light change the camera position Adjust the lens focus The image on the Adjust the contrast control of the monitor screen is dark t f there is an intermediate device correctly set the 75 2 The camera is not working properly and the surface of the camera is hot regulated power source i Check the camera is correctly connected to an appropriate Motion Detection is Has MOTION DET been set to ON in the menu is not activated Has MD AREA been properly defined The color of the i Check the settings in WHITE BALANCE menu picture is not correct The image on the is Make sure that the camera isn t facing direct sunlight or screen flickers fluorescent lighting If necessary change the camera position The SENS UP does is Check that the AGC setting in the EXPOSURE menu is t set to OFF not work ie Check the EXPOSURE menu and make sure SHUTTER is set to 27 Sj LIMITED WARRANTY VIDEO PRODUCTS THIS WARRANTY IS VALID ONLY ON PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF AMERICA THIS WARRANTV APPLIES ONLV TO speco technologies SUBJECT TO CONDITIONS AND EXCLUSIONS FOUND BELOW THIS PRODUCT IS WARRANTED AGAINST MANUFACTURING
22. monitor 1 If the SPECIAL menu screen is displayed use the Function Setup switch so that the arrow indicates TITLE CAMERA TITLE SETUP 2 Set it to ON by using the Function Setup switch ABCDEFGHIJKLM 3 Press the Function Setup switch NOPQRSTUVWXYZ 4 Use the Function Setup switch to move to a abcdefghijkim desired letter and select the letter by pressing nopqrstuvwxyz the Function Setup switch Repeat this to enter 0123456789 multiple letters You can enter up to 15 letters 5 Enter a title move the cursor to POS and press the Function Setup switch The entered title appears on the screen Select the position to display the title on the screen by using the Function Setup switch and press the Function Setup switch When the position is determined select END and press the Function Setup switch to return to the SPECIAL menu ie NOTE When the CAM TITLE menu is OFF no title will be displayed on the monitor screen even if you enter one Only English is available in this mode If you move the cursor to CLR and press the Function Setup switch all the letters are deleted To edit a letter change the cursor to the bottom left arrow and press the Function Setup switch Move the cursor over the letter to be edited move the cursor to the letter to be inserted and then press the Function Setup switch SYNC In areas where the supply is at 60Hz NTSC 50Hz PAL you can synchronize the output phase
23. of multiple cameras using the power synchronization function Line Lock without using a synchronization signal generator INT Internal Synchronization Type L L Power Synchronization Type Line lock Press the Function Setup switch You can select a desired phase from 0 to 359 when select phase 23 gt NOTE When using AC power at 60Hz NTSC 50Hz PAL frequency you can use the L L type svnchronization When the power is DC 12V the SYNC menu is fixed to the INT mode indicates MOTION DET 2 Set up the mode using the Function Setup switch SENSITIVITY You can select up to 8 MD areas When SENSITIVITY number is high motion detection sensitivity is increased to recognize even small movement AREA MODE Determines whether to use the MD area selected in SENSITIVITY SEL POS Determines which of the 4 vertices of each MD area is to be used XPOS Determines the coordinate of the horizontal axis for SEL POS YPOS Determines the coordinate of the vertical axis for SEL POS FILL SET Fills in a selected MD area The color of the area can be selected from brown orange blue cyan green yellow magenta and red RETURN Select this to save the MOTION DET menu settings and return to the SPECIAL menu MOTION DET This product has a feature that allows you to observe movement of objects in 8 different areas on the screen and the words MOTION DETECTED appear on the s
24. wn button Moves the cursor downwards Use this button to select an item or adjust the parameters Left button Moves the cursor to the left Use this button to select or adjust the parameters of the selected item The parameter changes each time this button is pressed Right button Moves the cursor to the right Use this button to select or adjust the parameters of the selected item The parameter changes each time this button is pressed Set button Executes selections and displays a submenu for an item with the mark 1 Press the Function Setup switch Main setup menu is displaved on the monitor screen MAIN SETUP gt 1 LENS DC lt 2 EXPOSURE 3 WHITE BAL 4 SSNR OFF 5 BACKLIGHT 6 DNR3 7 DAY NIGHT 8 SPECIAL 4 9 2 Select desired function using the Function Setup switch Place the cursor over a desired item 3 Set up a selected item by using the Function Setup switch 4 To finish the setting select EXIT and press the Function Setup switch gt NOTE An item with the 4 icon also has sub menus To select a sub menu select an item with the icon and press the Function Setup switch An item with the icon is unavailable due to function settings e Lens Setting Using this function you can control the screen brightness 1 When the SETUP menu screen is displayed select LENS by using the Function Setup switch so that the arrow indicat
Download Pdf Manuals
Related Search