Nady Systems SPM-6300 Musical Instrument User Manual
Contents
1. OWNER S MANUAL TREBLE GRAPHIC EQUALIZER L MONITOR Nl e de 1 r N N 15 15 NADY DO IC gt 1 E E BASS w SPM 6300 6 Channel Stereo Powered Mixer 15 15 S 1 60Hz 250Hz 800Hz 2KHz 8KHz R MAIN I i yal POWER ANP fo e LEFT E E RIGHT d 10 L N 10 N B 0 MON 5 0 MONITOR 1 MAIN 60Hz 250Hz 800Hz 2KHz 8KHz L R MAIN L R MAIN L R MAIN L R MAIN L ey G AUX TAPE ECHO EFF RETURN val 8 A 4 A A N 0 10 6 Channel Stereo Powered Mixer Congratulations on your choice of the NADY SPM 6300 Stereo Powered Mixer you have purchased one of the finest stereo powered mixing units on the market today This unit was developed using the expertise of professional sound engineers and working musicians You will find that your new SPM 6300 has superior performance and greater flexibility than any other stereo powered mixers in its price range Please read this manual carefully to get the most out of your new unit Thanks for selecting NADY AUDIO as your choice in stereo powered mixing unit FEATURES 6 input channels with balanced XLR Mic and 1 4 balanced line inputs e Fan cooled bipolar amplifier 2 x 150W RMS 4 ohms 1 THD both channels driven from 1 4 speaker jacks Built in Echo Effects DSP emulates room hall and stadium decay reverb2. Set this control slightly above minimum to emulate room reverbs and adjust towards maximum for hall and stadium decay reverbs 10 AUX INPUT The 1 4 Aux input jack can be used to add line level audio signals to the master mix This signal level is affected by the Aux Tape control 12 L R Main Volume 15 Monitor Volume 16 and 5 Band EQ s 18 11 TAPE INPUT The Left and Right Tape Input RCA jacks allow cassette recorders CD players or MP3 players to be added to the master mix output These signal levels are affected by the Aux Tape control 12 L R Main Volume 15 Monitor Volume 16 and 5 Band EQ s 17 12 AUX TAPE VOLUME This volume control adjusts the signal level in the master mix of the Aux and Tape inputs It is pre L R Main Volume 15 Monitor Volume 16 and 5 Band EQ s 17 13 EFFECTS SEND amp RETURN The Effect Send 1 4 jack provides a mono mixed signal output from each input channel to an external effects unit external amplifier or recording device The audio mix is adjusted by the EFF control of each channel The signal output is not effected by the internal reverb The Effects Return input jack can be used to return the signal into the SPM 6300 or it can be used as another auxiliary input for line level devices The input signal can be adjusted using the Effects Return Volume 14 and also the output volume of the external device 14 EFFECTS RETURN VOLUME The Effects Return input signal can be adjust
3. extension cord s power rating is exceeded and 3 never be left plugged into the outlet when not being used for a long period of time Care should be taken so that objects do not fall into and liquids are not spilled through the enclosure s openings The product should be serviced by qualified service personnel if A The power supply cord or the plug has been damaged B Objects have fallen into or liquid has been spilled onto the product C The product has been exposed to rain D The product does not appear to operate normally or exhibits a marked change in performance E The product has been dropped or the enclosure damaged Do not attempt to service the product beyond what is described in the user maintenance instructions All other servicing should be referred to qualified service personnel INSTALLATION To ensure years of enjoyment from your NADY AUDIO SPM 6300 powered mixer please read and understand this manual thoroughly before using the unit 1 INSPECTION Your NADY AUDIO SPM 6300 was carefully packed at the factory in packaging designed to protect the units in shipment Before installing and using your unit carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit Please note Nady Systems is not responsible for shipping damage If your unit is damaged do not return to Nady but notify your dealer and the shipping company if shipped to you immediately to
4. O 2 u T 90Hz 5 Band EQ 12dB EE 60Hz 250Hz 800Hz 2KHz 8KHz 4 GENERAL Power e e TET m m m Voltage selectable 115VAC 60Hz or 230VAC 50Hz Fuse Requirements ara rm 5x20mm glass tube F B 5A 250V 115VAC 2 5 250V 230VAC sg m aaa sas saan 27 45 lbs 12 5 Kg Dimensions Hl X W X D Rr 10 3 x 16 9 x 12 26 2 x 42 9 x 30 5 cm The specifications above are correct at the time of printing of this manual For improvement purposes all specifications for this unit including design and appearance are subject to change without prior notice 10 SERVICE FOR YOUR NADY AUDIO PRODUCT U S Should your NADY AUDIO product require service please contact the Nady Service Department via telephone at 510 652 2411 or e mail at service nach Com International For service please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANT Y J I gt I lt gt NADY SYSTEMS INC 6701 SHELLMOUND STREET EMERYVILLE CA 94608 Tel 510 652 2411 Fax 510 652 5075 e www nady com
5. ONO 1 4 PLUGS BALANCED USE OF STEREO 1 4 PLUGS Tip Tip Left signal ES 4 Ring Ring Right signal Ing cold Sleeve Sleeve Ground Shield Ground Shield Sleeve Ground Shield Tip Tip Ring Sleeve Sleeve Strain relief Strain relief clamp clamp Strain relief clamp RCA PIN PLUG Sleeve Ground Shield SPECIFICATIONS 1 INPUT SECTION MONO CH MIC XLR BALANCED 44K 21dBV 70mV RMS MONO CH LINE 1 4 TRS BALANCED 1 8KQ 8dBV 2V RMS AUX INPUT 1 4 UNBALANCED 8 7KQ 15dBV 4V RMS EFFECTS RETURN 1 4 UNBALANCED 8 7KQ 15dBV 4V RMS TAPE IN STEREO RCA JACKS 7 8 15dBV 4V RMS 2 OUTPUT SECTION Power Output 8680 Both Channels Driven 1 THD dE 105W RMS per side Both Channels Driven 196 THD p E Febr RR RUE par PR a EH Dax ERA FM dE Y RE RUE UE EMO PAREKRUT Ed 150W RMS per side OUTS FCS NS UU UU LIL EE E Tm 30Hz 19KHz 3dB jin scere 0 7 Flo Ee DEE 1 4 unbalanced Output le eco ec RT RESO 1500 Max Output LOVE MMMET REEERE 15dBV 4V RMS 3 MIXER SECTION 2 2 T 5dB Io Ve Le B OR mp 6mV RMS Tene EOF axo e X 10KHz F E
6. SECTION 1 MIC INPUT This electronically balanced XLR input is designed to accept signals from any balanced or unbalanced low impedance Low Z microphone The XLR jack is configured for Pin1 2 ground Pin2 positive Pin3 negative 2 LINE INPUT This 1 4 input is designed to accept balanced or unbalanced line level signals such as those from keyboards drum machines or samplers If a balanced signal is to be connected to the line input then a 1 4 TRS stereo phone plug should be wired for Tip positive Ring negative Sleeve ground Note Only the Mic or the Line input of a given channel should be connected at one time Do not connect both at the same time 3 TREBLE EQ Turn to the right to boost high frequencies adding crispness too percussion from drum machines cymbals and synths Turn to the left to cut these frequencies reducing sibilance or hiss The control has a shelving response providing 15dB of boost or cut at 10kHz 4 BASS EQ This control provides 15dB of boost or cut at 90Hz Boosting the Bass control by turning to the right can fatten the sound adding warmth to vocals or extra punch to bass drums and synths Turn to the left to reduce stage rumble hum or to improve a mushy sound Cutting the Treble and Bass controls then pushing up the subsequent volume control is equivalent to a mid range boost 5 EFFECT CONTROL The Effect control adjusts the signal level sent by ea
7. al runaway If it is getting very hot either turn the audio down some or let the SPM 6300 idle with no output signal and the fan on CAUTION REAR PANEL CAN GET VERY HOT Keep panel away from flammable objects For maximum cooling ventilation and efficiency keep mixer away from walls or other objects 20 POWER CONNECTOR amp FUSE COMPARTMENT The IEC socket is used to connect the power cord to an AC power source Replace with only the same type fuse as listed in the SPECIFICATIONS If it blows continuously do not use the unit and have it serviced by qualified personnel Caution Do not remove the center grounding pin 21 AC VOLTAGE SELECTOR SWITCH Before plugging in the power cord check to see that the unit is set for the proper voltage for your area 115V 60Hz or 230V 50 2 CONNECTIONS This NADY AUDIO mixer uses 4 different types of audio connectors for the various input output connections 1 XLR balanced 2 1 4 TRS phone jacks for balanced unbalanced stereo or in out inserts 3 1 4 TS unbalanced 4 RCA pin unbalanced Figures 1 Balanced XLR input connections 2 Stereo headphone connection with 1 4 TRS plug Ee 3 1 4 mono THS plug used as unbalanced input output 4 1 4 stereo TRS plug used as balanced input output Ground Screen 5 RCA pin plug for unbalanced input output Out of Phase Signal Hot In Phase Signal Socket female 1 HEADPHONES UNBALANCED USE OF M
8. ch channel to the internal Echo Effects DSP Digital Sound Processor The Effect controls are post Channel EQ and the signal level sent to the EFF bus will not be affected by the channel volume settings This control also adjusts the level of the un effected signal sent to the Effect Send 13 output 6 MONITOR VOLUME The Monitor Volume control adjusts the channel signal level sent to the Monitor Master Volume 16 when the Power Amp Selector Switch 18 is set to Monitor Main This control can be adjusted to set the desired monitor mix The Monitor Volume control is not active when the selector switch is set to Left Right 7 LEFT RIGHT MAIN VOLUME The Left Right Volume control adjusts the channel signal level sent to the master L R Main Volume control 15 This control can be adjusted to set the desired level for the channel in the mix FRONT CONTROLS AND CONNECTIONS 16 12 9 ECH EFF RETURN Val d 15 14 10 8 11 13 GRAPHIC EQUALIZER L MONITOR NADY 5 aps EK ap 6 Channel Stereo 17 Powered Mixer 250Hz 800Hz 2KHz 8KHz POWER AMP o LEFT mad Co MONITOR 250Hz 800Hz 2KHz 8KHz FRONT CONTROLS AND CONNECTIONS MASTER SECTION 8 POWER ON OFF SWITCH amp LED This switch turns the unit on and off and the LED indicator will light when the unit is on 9 ECHO EFFECT This control adjusts the feedback decay time of the internal Echo Effects DSP
9. ed using this control 15 LEFT RIGHT MAIN MASTER VOLUME This control sets the level of the stereo left and right signal sent to the left and right Speaker Outputs 19 when the Power Amp Selector Switch 18 is set to Left Right When the selector switch is set to Monitor Main this control adjusts the level of the Main Speaker Output 19 16 MONITOR MASTER VOLUME This control sets the level of the Monitor mix sent to the Monitor Speaker Output 19 when the Power Amp Selector Switch 18 is set to Monitor Main This control is not active when the selector switch is set to Left Right 17 STEREO 5 BAND GRAPHIC EQ The dual 5 band graphic equalizers allow you to adjust the frequency response of the Left Right outputs or the Monitor Main outputs allowing final tonal adjustments These provide a maximum of 12dB cut or boost from the flat position for each frequency band 60HZ 250Hz 800Hz 2KHz 8KHz The faders can be adjusted to easily eliminate feedback at the corresponding frequency or audibly color the final mix 18 POWER AMP SELECTOR SWITCH This switch selects which signals are sent to the internal power amps When Left Right is selected the stereo signal from the L R Master Volume 15 is sent to separate Left and Right 5 Band EQ s 17 and then continues to the Left and Right Speaker Outputs 19 When Monitor Main is selected the signal from the Main Master Volume 15 is sent to the Main 5 Band EQ then to the Main Speaker Outpu
10. he user to the presence of important operating and service instructions in the literature enclosed with this unit IMPORTANT SAFETY INSTRUCTIONS When using this electronic device basic precautions should always be taken including the following 1 2 10 11 Read all instructions before using the product Do not use this product near water e g near a bathtub washbowl kitchen sink in a wet basement or near a swimming pool etc This product should be used only with a cart or stand that will keep it level and stable and prevent wobbling This product in combination with headphones or speakers may be capable of producing sound levels that could cause permanent hearing loss Do not operate for a long period of time at a high volume level or at a level that is uncomfortable If you experience any hearing loss or ringing in the ears you should consult an audiologist The product should be positioned so that proper ventilation is maintained The product should be located away from heat sources such as radiators heat vents or other devices including amplifiers that produce heat The product should be connected to a power supply only of the type described in the operating instructions or as marked on the product Replace the fuse only with one of the specified type size and correct rating The power supply cord should 1 be undamaged 2 never share an outlet or extension cord with other devices so that the outlet s or
11. make a claim Such claims must be made by the consignee timely manner 2 SETUP AND OPERATION Parts of the unit can become very warm during use This is normal during operation Care should be taken to ensure that there is enough space around the unit for cooling Also do not place the SPM 6300 on high temperature devices such as power amplifiers etc or the unit may overheat in operation Although the unit s chassis is shielded against radio frequency RF and electromagnetic interference EMI extremely high fields of RF and EMI should be avoided Please make sure that the power unit supplied is marked for the correct voltage in your area 120VAC 60 Hz or 230VAC 50 Hz Power requirements for electrical equipment differ from area to area In new installations and portable sound systems or any situation in which the AC power is in question it is wise to confirm the voltage and use the appropriate power supply unit before connecting it to power Sources Europe except UK 230V 50Hz UK and Australia 240V 50Hz USA and Canada 120V 60 Hz For other areas please check with local authorities When ready to operate plug the AC cord into the power source Make sure that the unit is turned off before connecting to the AC power source to avoid possible loud transients which can damage your speakers or your ears FRONT CONTROLS AND CONNECTIONS TREBLE L R MAIN L 3 4 5 6 7 2 1 CHANNEL
12. s Input controls include channel Treble and Bass EQ s channel EFF Send Monitor volume and L R Main volume controls e Aux Input Effects Send and Return Tape CD Input stereo RCA jacks e Stereo 5 band master EQ Main and Monitor volume controls with L R Main Monitor selector switch Aux Tape and Effects Return volume controls e Rugged road carrying case with reinforced corners and carrying handle for long life and easy portability e Internal shielded AC supply with 115V 60Hz 230V 50Hz selector switch TABLE OF CONTENTS FEATURES ceccccecececcsssseseserssesecsessscseseserevevecscseseesesstnevevenseseeteseseens 2 h WARNING a eet MR SRL INSTALLATION 4 Dealers Name FRONT PANEL CONTROLS amp CONNECTIONS 5 City REAR PANEL CONTROLS amp CONNECTIONS 8 State Zip CONNECTION S m SPECIFICATIONS 10 Serial An equilateral triangle enclosing a lightening flash arrowhead symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure which may be of sufficient magnitude to constitute a risk of electric shock CAUTION DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL An equilateral triangle enclosing an exclamation point is intended to alert t
13. t and the signal from the Monitor Master Volume 16 is sent to the Monitor 5 Band EQ then to the Monitor Speaker Output REAR CONTROLS AND CONNECTIONS 22 115VAC I ES CAUTION RISK OF ELECTRIC SHOCK ul DO NOT OPEN WARNING SPEAKER OUTPUTS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE DO NOT REMOVE CHASSIS OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 1 SS a R MAIN 3 c L MON SERIAL waw ce 150W RMS 40 per side both channels driven 0 NADY SYSTEMS INC FUSE 5A 250V 115VAC sup 2 5A 250V 230VAC Emeryville CA USA MADE IN CHINA Minimum 40 per side 20 19 19 SPEAKER OUTPUT JACKS The R Main and L Monitor outputs are for the Right and Left or Main and Monitor outputs respectively depending on the Power Amp Selector Switch 18 setting The 1 4 speaker outputs can deliver up to 150W RMS per side to 4Q loads Speaker loads less than 4Q are not recommended and could result in overheating and damage to the internal amplifiers If the output audio is noticeably distorted or sounds like it is turn down the master volume controls immediately to avoid clipping which can damage you speakers and the SPM 6300 power amp with excessive neglect If the mixer has been running constantly for several hours make sure the rear panel is not getting too hot to avoid over heating the unit and causing therm
Download Pdf Manuals
Related Search