Memorex MTT3200 CD Player User Manual
Contents
1. When the disc is through playing it will stop rotating Press the STOP button to stop the disc before it is finished When you have finished listening slide the FUNCTION switch to the OFF position FAQS Do I need an adapter to play 3 singles No simply insert the 3 single into the groove What type of CDs can I play CD CD Rs and CD RWs can be used NOTES e disc is inserted incorrectly dirty damaged or not present at all it will not play As each track is played the track number is shown in the display MTT3200 O M QXD 2 28 03 9 22 AM Page 6 COMPACT DISC CD OPERATION CONTINUED TO REPEATEDLY PLAY BACK ONE TRACK Slide the FUNCTION switch to the CD position and press the CD Open Close button Place a CD on the center spindle with the printed label side facing up Press the CD Open Close button again to close the CD compartment door Select track using the SKIP Search 9 or button the unit will automatically play the track Press the RPT button once the Repeat indicator will blink and the unit will play the selected track over and over until the STOP W button is pressed TO REPEATEDLY PLAY BACK ALL TRACKS Slide the FUNCTION switch to the CD position and press the CD Open Close button Place a CD on the center spindl2. Button MTT3200 O M QXD 2 28 03 9 22 AM Page 4 PREPARATION FOR USE AC Operation Unwind the AC cord and extend it to its full length Insert the end of the AC cord into any convenient 110 120V 60Hz household outlet one blade wider than the other This is a safety feature to reduce the likelihood of electric shock This polarized AC plug will only fit in a polarized AC outlet If you find that you cannot insert this plug into your AC Outlet outlet you may have an obsolete non polarized outlet Please do not try to defeat this safety feature by using a non polarized adapter or by filing the wider blade to make it fit into your outlet If this plug does not fit into AC Plug your outlet you should contact a qualified licensed electrician to replace your obsolete outlet Please note that this unit is equipped with a polarized AC plug which has GID RADIO OPERATION TO PLAY THE RADIO Slide the FUNCTION switch to Slide the BAND switch to select Rotate the TUNING control to the RADIO position AM FM or FM STEREO Noise select a station present in FM broadcasts can be reduced by sliding the BAND switch to FM STEREO position the broadcast will then be in mono FM STEREO When the BAND switch is set to the FM STEREO position and a strong FM stereo station is broadcasting the FM ST indicator will light ANTENNAS AM This unit has a built in ferrite rod anten
3. is the ability to preselect the order in which a series of tracks will be played Each track may be stored in the program memory as many times as desired up to 30 tracks Ifyou attempt to program more than 30 tracks the display will show Fu Full e As each track is played its track number will be displayed You can move forward or backward through the programmed tracks with the SKIP Search 14 or hi button e The CD player will stop after all programmed tracks have been played or the STOP W button is pressed e To playback the program again press the PROG button then press the PLAY PAUSE p II button e To clear the program memory press the STOP W button while in the Stop mode MTT3200 O M QXD 2 28 03 9 22 AM Page 8 CARE AND MAINTENANCE Caring for Compact Discs 2 Treat the compact disc carefully Handle the compact disc only by its edges Never allow your fingers to come in contact with the shiny unprinted side of the compact disc j Do not attach adhesive tape stickers etc to the compact disc label Clean the compact disc periodically with a soft lint free dry cloth Never use detergents or abrasive cleaners to clean the compact disc If necessary use a CD cleaning kit compact disc skips or gets stuck a section of the compact disc it is probably dirty or damaged scratched When cleaning the compact disc wipe in straight lines from the center of
4. of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal PORTABLE CART WARNING symbol provided by RETAC 16 17 18 19 20 21 22 23 24 SAFETY INSTRUCTIONS 15 OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock OBJECT AND LIQUID ENTRY Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock Never spill or spray any type of liquid on the product OUTDOOR ANTENNA GROUNDING If an outside antenna is connected to the product be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electric Code ANSI NFPA 70 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge product size of grounding conductors location of antenna discharge product connection to grounding electrodes and requirements for grounding electrode ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 SERVICE EQUIPMENT N
5. the compact disc to the outer edge of the compact disc Never wipe in circular motions This unit is designed to play only compact discs bearing the identification logo as shown here compact Other discs may not conform to the CD standard and may not play properly LS 5 Compact Discs should be stored their cases after each use to avoid damage DIGITAL AUDIO Do not expose compact discs to direct sunlight high humidity high temperatures or dust etc Prolonged exposure or extreme temperatures can warp the compact disc Do not stick or write anything on either side of the compact disc Sharp writing instruments or the ink may damage the surface Cleaning the unit To prevent fire or shock hazard disconnect your unit from the AC power source when cleaning The finish on your unit may be cleaned with a dust cloth and cared for as other furniture Use caution when cleaning and wiping the plastic parts Mild soap and a damp cloth may be used on the front panel MTT3200 O M QXD 2 28 03 9 22 Page 9 TROUBLESHOOTING GUIDE Should this unit exhibit a problem check the following before seeking service Symptom Possible Cause Solution Radio Noise or sound distorted Station not tuned properly for Retune the AM or FM broadcast on radio broadcasts AM or FM station FM Wire Antenna is not Fully extend FM Wire Antenna properly adjusted AM Unit is not position
6. 200 O M QXD 2 28 03 9 22 AM Page 11 Memorex NOSTALGIC STEREO SYSTEM WITH CD PLAYER AND AM FM STEREO RADIO MODEL MTT3200 BEFORE OPERATING THIS PRODUCT PLEASE READ THESE INSTRUCTIONS COMPLETELY OPERATING INSTRUCTIONS MTT3200 O M QXD 2 28 03 9 22 AM Page 1 Thank you for purchasing the Memorex audio system The serial number of your unit can be found on a label on the bottom of the cabinet We suggest that you record the serial number in the space provided below in case this information is ever needed at a future date PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX Model Number MTT3200 Serial Number CAUTION RISK OF ELECTRIC SHOCK gt DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL DANGEROUS VOLTAGE The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons ATTENTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instru
7. EC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NATIONAL ELECTRICAL CODE NEC ART 250 PART H 52898A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE SERVICING Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel REPLACEMENT PARTS When replacement parts are required be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards SAFETY CHECK Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition WALL OR CEILING MOUNTING The product should be mounted to a wall or ceiling only as recommended by the manufacturer DAMAGE REQUIRING SERVICE Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product If the product has been exposed to rain or water If the product does not operate normally by following the operating instructions Adjust only those controls that are covered b
8. ctions in the literature accompanying the appliance DANGER Invisible and hazardous laser radiation when open and interlock failed or defeated Avoid direct exposure to beam Ip PD LASER SAFETY This unit employs laser Only qualified service personnel should attempt to service this device due to possible eye injury CAUTION USE OF CONTROLS ADJUSTMENTS OR PERFORMANCE PROCEDURE HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made SURGE PROTECTORS It is recommended to use surge protector for AC connection Lightning and power surges ARE NOT covered under warranty for this product INFORMATION This equipment has been tested and found to comply with the limits for Class digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee tha
9. e with the printed label side facing up Press the CD Open Close button again NOTE to close the CD compartment door Press the RPT button twice the Repeat indicator will light To stop and cancel Repeat playback press the STOP W button Press the PLAY PAUSE p Il button to begin playback and the unit will play the entire disc over and over until the STOP W button is pressed MTT3200 O M QXD 2 28 03 9 22 AM 7 COMPACT DISC CD OPERATION CONTINUED TO PROGRAM THE MEMORY UP TO 30 TRACKS Slide the FUNCTION switch to the CD position and press the CD Open Close button Place a CD on the center spindle with the printed label side facing up Press the CD Open Close button again to close the CD compartment door Press the PROG button 01 will appear in the display and the Program indicator will blink Use the SKIP Search K lt or gt gt i button to select the first track to be programmed Press the PROG button again the selected track has now been programmed and counted as program 1 Repeat steps 3 and 4 to program the other desired tracks in sequence up to 30 tracks Press the PLAY PAUSE gt button to begin playback the Program indicator will light and the tracks will play in the order programmed NOTES Programming
10. e a damp cloth for cleaning ATTACHMENTS Do not use attachments not recommended by the product s manufacturer as they may cause hazards WATER AND MOISTURE Do not use this product near water for example near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool ACCESSORIES Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn VENTILATION Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should never be placed near or over a radiator or heat source This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacture
11. ed Rotate unit until best reception is correctly obtained AM or FM no sound FUNCTION switch not set to RADIO Set FUNCTION switch to RADIO Volume at minimum Increase volume Compact Disc Player CD Player will not play FUNCTION switch not set to CD Set FUNCTION switch to CD CD is not installed or installed Insert CD with label side up upside down CD skips while playing Disc is dirty or scratched Wipe disc with cloth or use another disc General No sound Power cord disconnected Connect power cord FOR ADDITIONAL SET UP OR OPERATING ASSISTANCE PLEASE VISIT OUR WEBSITE AT WWW MEMOREXELECTRONICS COM OR CONTACT CUSTOMER SERVICE AT 1 800 919 3647 PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX FOR PARTS AND ACCESSORIES CONTACT FOX INTERNATIONAL AT 1 800 321 6993 9 MTT3200 O M QXD 2 28 03 9 22 Page 10 Memcorp Inc Weston FL Printed in Hong Kong Visit our website at www memorexelectronics com
12. na which provides adequate reception in most areas lf reception is weak turn the unit to desired Slide the FUNCTION switch to the OFF position to FM If reception is weak extend the AC cord to its full length You turn the unit off may have to vary the direction of the AC cord to find the strongest signal for each FM station MTT3200 O M QXD 2 28 03 9 22 AM COMPACT DISC CD OPERATION Page 5 TO INSERT AND PLAY CD STANDARD CD CD R AND CD RW CAN BE USED Slide the FUNCTION switch to the CD position and press the CD Open Close button Place a CD on the center spindle with the printed label side facing up Press the CD Open Close button again to close the CD compartment door To play a disc from the beginning press the PLAY PAUSE gt button Press the PLAY PAUSE P II button again to pause playback the Play Pause indicator will blink To start from a specific track locate the track using the SKIP Search 4 or button the unit will automatically play the track Adjust the VOLUME control as desired To skip forward or backward through the tracks on the disc press the SKIP Search K lt or gt button To search forward or backward through the tracks press and hold the SKIP Search 44 or button a chattering noise will be heard
13. r s instructions have been adhered to POWER SOURCES This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your appliance dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions GROUNDING OR POLARIZATION This product is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance LIGHTNING To protect your product from a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges POWER LINES An outside antenna system should not be located in the vicinity
14. t interference will not occur in particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help MTT3200 O M QXD 2 28 03 9 22 AM Page 2 Before using the unit be sure to read all operating instructions carefully Please note that these are general precautions and may not pertain to your unit For example this unit may not have the capability to be connected to an outdoor antenna 1 8 10 11 12 13 14 READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference HEED WARNINGS All warnings on the product and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS All operating and use instructions should be followed CLEANING Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Us
15. y the operating instructions as an adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation If the product has been dropped or the cabinet has been damaged f When the product exhibits a distinct change in performance this indicates a need for service HEAT The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat NOTE TO CATV SYSTEM INSTALLER This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical MTT3200 O M QXD 2 28 03 9 22 AM Page 3 LOCATION OF CONTROLS 5 676 9 1011 12 13 14 15 16 17 18 19 20 21 22 1 VOLUME Control 13 POWER Indicator 2 AC Cord Rear of Unit 14 CD Compartment 3 AM FM Dial Scale and Pointer 15 FM ST Indicator 4 TUNING Control 16 CD Open Close Button 5 Speaker 17 Speaker 6 SKIP Search s4 Button 18 STOP Button 7 Program Indicator 19 Play Pause Indicator 8 PROG Program Button 20 PLAY PAUSE I Button 9 Display 21 FUNCTION Switch 10 RPT Repeat Button 22 BAND Switch 11 Repeat Indicator 12 SKIP Search
Download Pdf Manuals
Related Search