Home

Magnavox MRD100 Home Theater System User Manual

1. You can store up to 40 preset radio stations in the memory There are three different ways to program the radio stations Using auto install for first time setup only Using automatic preset Using manual preset Helpful Hints If no radio station is found after searching from FM to AM band CHECK ANTENNA appears Press any keys to exit the tuner preset mode If you attempt to program more than 40 preset radio stations PROGRAM FULL appears Using auto install This feature is only applicable for first time radio station programming You will be prompted to install the radio stations when you access the tuner mode With one touch of button all the available radio stations will be stored automatically TM TACT O nura INSTALL Rew PLAY PAUSE FFWD P So NR Eh O 4 DSCMENU sque P A X S gt Press TUNER 3 AUTO INSTALL PRESS PLAY appears 3 The system will exit auto install mode if no button is pressed within 10 seconds or STOP button is pressed O Press PII 3 AUTO appears on the display panel 3 The system will start searching from the FM band followed by the AM band 3 All the available radio stations with strong signal will be stored automatically 3 Once complete the first preset station will be played back Tuner Operations continued Using automatic preset Use automatic presetting to store or reinstall all the p
2. 9 50KHZ or 10 100KHZ Sound and Volume Controls VOLUME SURROUND e SOUND MAGNAVOX Selecting surround sound Press SURROUND to select multi channel surround or Stereo 3 The availability of the various surround sound modes depends on the sound available on the disc 3 The center and rear speakers operate only in multi channel surround mode 3 The available output modes for Multi channel include Dolby Digital Dolby Pro Logic or Dolby Pro Logic Il surround gt Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode However mono single channel sound sources will not produce any sound from the rear speakers 3 During playback of DTS audio track sound will be muted even though Video is playback Press AUDIO to select other audio track will appear on TV Follow the instructions to get sound output 38 Selecting digital sound effects Select a preset digital sound effect that matches your disc s content or that optimizes the sound of the musical style you are playing Press SOUND to select the available sound effect When playing movie discs or in TV mode you can select CONCERT DRAMA ACTION or SCI FI When playing music discs or while in TUNER or AUX DI mode you can select CLASSIC JAZZ ROCK or DIGITAL Helpful Hint For flat sound output select CONCERT or CLASSIC Volume c
3. Replace the batteries with new ones Point the remote control directly toward the IR sensor Check that the batteries are loaded correctly Insert a readable disc with the playback side facing down The DVD R CD R must be finalized Check the disc type color system PAL or NTSC and region code Check for any scratches or smudges on the disc Press SETUP to turn off the system setup menu screen You may need to enter the password in order to unlock the disc for playback Moisture may have condensed inside the system Remove the disc and leave the system turned on for about an hour The aspect ratio is fixed on the DVD disc Depending on the TV it may not be possible to change the aspect ratio The features may not be available on the DVD Changing the language for the sound or subtitle is prohibited on this DVD Press STOP button twice before selecting the system setup menu Depending on the disc availability some menu items cannot be selected If the signal is too weak adjust the antenna or connect an external antenna for better reception Increase the distance between the system and your TV or VCR Tune in to the correct frequency Place the antenna further away from any equipment that may be causing the interference Disconnect the power cord from the power outlet for a few minutes Reconnect the power cord and try to operate again as usual 41 Glossary Analog Sound that has not been turned into
4. Stopping playback O Press STOP B Selecting various repeat functions Repeating play mode While playing a disc press REPEAT on the remote control repeatedly to choose a repeat play mode DVD gt RPT CHP repeat chapter gt RPT TIT repeat title gt RPT OFF exit repeat mode VCD SVCD CD gt RPT ONE repeat track gt RPT DIS repeat disc gt RPT OFF exit repeat mode MP3 gt RPT ONE repeat track gt RPT FLD repeat folder RPT DIS repeat disc gt RPT OFF exit repeat mode Helpful Hint Repeat playback is not possible on VCDs when the PBC mode is turned on Repeating a selection within a chapter track While playing a disc press REPEAT A B at the starting point Press REPEAT A B again to end the section 3 The section A and B can be set only within the same chapter track gt The section will now repeat continuously Press REPEAT A B again to resume normal playback TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 26 Programming disc tracks for audio CDs and VCDs You can play the contents of the disc in the order you want by programming the playing order of the tracks Up to 99 tracks can be stored Stop playback press PROGRAM on the remote control 3 PROGRAM P00 00 will appear on the display panel O Use the numeric keypad 0 9 to
5. enter a valid track chapter number Press OK to store the track 3 FULL will appear if you have programmed 99 tracks O Repeat O O to select other tracks Press PII to start program playback O To clear programmed track press STOP B twice Helpful Hint If the DVD system is disconnected from the power supply it will erase the program Disc Operations continued Other playback features DISPLAY MAGNAVOX SUBTITLE AUDIO ANGLE a Ls ZOOM Using the Disc Menu Depending on the disc format a menu may appear on the TV screen once you load the disc To select a playback feature or item O Use 4 gt A Y keys or numeric keypad 0 9 on the remote control then press OK to start playback To access or remove the menu O Press DISC MENU on the remote control For VCD 2 0 with playback control feature PBC O During playback press DISC MENU will return to the main menu screen if PBC is turned on TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 27 Disc Operations continued Using the Title Menu While playing a DVD disc press TITLE to display the title menu Use 4 P A Y keys or numeric Resuming playback from the last stopped point O When play is stopped and the disc has not been ejected Press Pill to resume keypad 0 9 on the remote control t
6. 7082 Ndebele South 7882 Ukrainian 8575 Frysk 7089 Ndonga 7871 Urdu 8582 Fijian 7074 Nederlands 7876 Uzbek 8590 Gaelic Scottish Gaelic 7168 Nepali 7869 Vietnamese 8673 Gallegan 7176 Norsk 7879 Volapuk 8679 Georgian 7565 Northern Sami 8369 Walloon 8765 Gikuyu Kikuyu 7573 North Ndebele 7868 Welsh 6789 Guarani 7178 Norwegian Nynorsk 7878 Wolof 8779 Gujarati 7185 Occitan Provencal 7967 Xhosa 8872 Hausa 7265 Old Bulgarian Old Slavonic 6785 Yiddish 8973 Herero 7290 Oriya 7982 Yoruba 8979 Hindi 7273 Oromo 7977 Zulu 9085 Hiri Motu 7279 Ossetian Ossetic 7983 Hrwatski 6779 Pali 8073 Ido 23 9 Panjabi 8065 Interlingua International 7365 Persian 7065 Interlingue 7365 Polski 8076 Inuktitut 7385 Portugu s 8084 English 6 E Espa ol 44 E O 3 oo B Portugu s 82 ra c Table of contents General Information Setup precautions Accessories supplied Cleaning discs ADOLECE ELE NOR IAEA NA TER Product Overview yLDn Remote Control Using the remote control Connections Basic Connections 13 17 Step Placing the speakers Step 2 Connecting to the speakers and subwoofer Step 3 Connecting to TVico Option Using composite video jack CVBS Option 2 Connecting to a Progressive Scan TV or component video input Step 4 Connecting the FM AM antenn
7. Distortion FM Mono 3 Frequency response 150 Hz 20 kHz FM Stereo 3 Dimensions 100 x 95 x 83 mm AM 5 wxhx d Frequency Response FM 180 Hz 10 kHz Weight 0 52 kg Stereo Separation FM 26 dB kHz Stereo Threshold FM 23 5 dB PASSIVE SUBWOOFER Impedance 80 DISC SECTION Speaker drivers 6 5 high efficiency woofer Laser Type Semiconductor Frequency response 40 Hz 150 Hz Disc Diameter 12cm 8cm Dimensions 130 x 328 x 350 mm Video DAC 10 Bits wxhxd Signal System PAL NTSC Weight 3 38 kg Video Format 4 3 16 9 Video S N 56 dB minimum Composite Video Output 1 0 Vp p 750 Specifications subject to change without prior Audio DAC 24 Bits 96 kHz notice Frequency Response 4 Hz 20 kHz 44 1 kHz 4 Hz 22 kHz 48 kHz 43
8. JPEG pictures simultaneously DVD Setup Menu Options Using the menu bar Accessing the DVD setup menu picture setup page Sound setup Page Feature Setup Page Radio Tuning Tuner Operations Tuning to radio stations Presetting radio stations Using auto install Using automatic preset Using manual preset Selecting a preset radio station Deleting a preset radio station Changing tuning grid Sound and Volume Controls Selecting surround sound Selecting digital sound effects Volume control Other Features Controlling PHILIPS TV with the remote control Dimming systems s display screen Setting the sleep timer Troubleshooting Glossary Specifications General Information CAUTION The machine does not contain any user serviceable parts Please leave all maintenance work to qualified personnel Setup precautions Finding a suitable location Place the set on a flat hard and stable surface Do not place the set on a carpet Do not position the set on top of other equipment that might heat it up e g receiver or amplifier Do not put anything under the set e g CDs magazines Install this unit near the AC outlet where the AC power plug can be easily reached Space
9. Theater Audio System in order to enjoy the multi channel surround sound capabilities O Use an audio cable red white to connect the AUX IN jacks on this DVD system to the AUDIO OUT jacks on an analog audio video device To listen to the sound press TV AUXIDI repeatedly on the remote control until AUX appears on the display panel Helpful Hint To see the picture of the connected video device e g VCR connect the VIDEO OUT jack of the device to the VIDEO IN jack of the TV and select the correct input channel on the TV Connecting digital audio equipment Use a coaxial cable not supplied to connect the DIGITAL IN jack on this DVD system to the DIGITAL OUT jack on the connected device To listen to the sound press TV AUXIDI repeatedly on the remote control until DI appears on the display panel Helpful Hint For your playback through DIGITAL IN connection set the digital output of that player to PCM format TIPS Refer to the respective connected device s user manual for other possible connections 18 Step I system Turning on the DVD O Press STANDBY ON O Press the SOURCE button on the front panel repeatedly to select DISC gt FM gt AM STANDBY ON SOURCE O JC 3 3 Or O Press DISC TUNER on the remote control STANDBY ON OPEN CLOSE I7 pisc TUNE
10. Use this function to adjust the speakers output level 3l DVD Setup Menu Options continued Accessing the DVD setup menu This DVD system setup is carried out via the TV enabling you to customize the DVD system to suit your particular requirements STANDBY ON OPEN CLOSE lt pAY OK O In DISC mode press SETUP on the remote control gt The setup menu appears O Highlight icon and press Y to enter the setup menu gt Playback will pause O Use Y keys to select one of the setup menu options and press to enter the menu Use 4 PA Y keys to navigate in the menu and press OK to confirm your selection 3 Instructions and explanations of the options are provided in the following pages gt If the option in the menu is grayed out that means the setting is not available or cannot be changed in the current state 5 To exit press SETUP NOTE Some of the features in the Setup Menu are described in Getting Started chapter 32 gt TV SHAPE asta Picture TV SYSTEM NTSC Set etu PROGRESSIVE OFF P 33 SCRSAVER OFF see page SMARTPOWER oFF GO TO PICTURE SETUP PAGE NIGHT MODE Sound CNTR DELAY OFF Setup REAR DELAY OFF see page 34 TEST TONE OFF GO TO SOUND SETUP PAGE AUDIO ENGLISH SUBTITLE ENGLISH Language DISC MENU ENGLISH Setup see page 20 GO TO LANGUAGE SETUP PAGE PARENTAL NO PARENTAL PASSWORD Feature MENU LANG ENGLISH Setu
11. Y Move to B and press P gt Move to MENU LANG and press p SPANISH PORTUGUES j K PREFERENCE SET TO ENGLISH Use Y keys to select a language and press OK to confirm for DVD playback You can select your preferred language settings for DVD playback If the selected language is recorded on the DVD disc the DVD system will automatically play the disc in that language Otherwise the disc s default language will be used instead In disc stop mode press SETUP gt Use d PA Y keys on the remote control to navigate in the menu O Highlight ff icon and press Y Move to and press P gt O Use AY keys to highlight one of the options below then press P gt C P m AUDIO SUBTITLE DISC MENU ENGLISH ENGLISH ENGLISH GO TO LANGUAGE SETUP PAGE AUDIO Selects the preferred audio language for DVD playback SUBTITLE Selects the preferred subtitle language for DVD playback DISC MENU Selects the preferred disc menu language for DVD playback Use AY keys to select a language and press OK to confirm Repeat steps for other settings TIPS Press 4 to go back to the previous menu item Press SETUP to exit the menu 20 Helpful Hints During DVD playback you can switch the audio and subtitle languages by pressing the AUDIO and SUBTITLE buttons on the remote control However this does not change the default settings you have made her
12. for ventilation Place the apparatus in a location with adequate ventilation to prevent internal heat build up Allow at least 10 cm 4 clearance from the rear and the top of the set and 5cm 2 from the left and right to prevent overheating 5cm 2 Avoid high temperatures moisture water and dust Apparatus must not be exposed to dripping or splashing Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles Accessories supplied passive subwoofer 4 satellite speakers center speaker remote control with batteries video cable audio cable FM wire antenna AM loop antenna Quick Start Guide Cleaning discs Some problems occur frozen picture sound disruptions picture distortions because the disc inside the unit is dirty To avoid these problems discs should be cleaned on a regular basis To clean a disc use a micro fiber cleaning cloth and wipe the disc from the center to the edge in a straight line CAUTION Do not use solvents such as benzene thinner commercially available cleaners or anti static sprays intended for discs About recycling These operating instructions have been printed on non polluting paper The electronic equipment contains a large number of materials that can be recycled If you are disposing of an old machine please take it to a recycling center Please observe the local regula
13. numbers Analog sound varies while digital sound has specific numerical values These jacks send audio through two channels the left and right Aspect ratio The ratio of vertical and horizontal sizes of a displayed image The horizontal vs vertical ratio of conventional TVs is 4 3 and that of wide screens is 16 9 Bit Rate The amount of data used to hold a given length of music measured in kilobits per second or kbps Or the speed at which you record Generally the higher the bit rate or the higher the recording speed the better the sound quality However higher bit rates use more space on a disc Chapter Sections of a picture or a music piece on a DVD that are smaller than titles A title is composed of several chapters Each chapter is assigned a chapter number enabling you to locate the chapter you want Disc menu A screen display prepared for allowing a selection of images sounds subtitles multi angles etc to be recorded on a DVD Dolby Digital A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio front left and right surround left and right center and subwoofer Dolby Surround Pro Logic ll It is an improved matrix decoding technology that provides better spatiality and directionality on Dolby Surround program material provides a convincing three dimensional sound field on conventional stereo music recordings and is ideally suited to bring the surroun
14. the TV using an audio cable Press TV AUXIDI on the remote control to select TV when watching the TV programs TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet Basic Connections continued fix the claw into the slot AM loop antenna FM wire NV Option 2 Connecting to a Progressive Scan TV or component video input The progressive scan video quality is only available when using Y Pb Pr connection and a progressive scan TV is required It provides superior picture quality when watching DVD movies Follow option to make the basic video connection Use the component video cables red blue green not supplied to connect the Y Pe Pr jacks on the DVD system to the corresponding component video input jacks or labeled as Y Pb Cb Pr Cr or YUV on the TV O If your TV accepts progressive signals proceed to Getting Started Step 5 Setting up Progressive Scan feature for detailed progressive feature setup Helpful Hint If your TV does not support Progressive Scan you will not be able to view the picture Press and hold OPEN CLOSE button and press I to deactivate progressive scan Step 4 Connecting the FM AM antennas Connect the supplied AM loop antenna to the AM jack Place the AM loop antenna on a shelf or attach it to a stand or wall Connect
15. the supplied FM antenna to the FM jack Extend the FM antenna and fix its ends to the wall For better FM stereo reception connect an external FM antenna not supplied Helpful Hints Adjust the position of the antennas for optimal reception Position the antennas as far away as possible from your TV VCR or other radiation source to prevent any unwanted interference TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet l6 Basic Connections continued ou FRONT C FRONT FRONT right O LEFT CENTER Emery Step 5 Connecting the power cord After everything is connected properly plug the AC power cord into the power outlet The LED on the DVD system will light up Never make or change any connections with the power turned on Helpful Hint Refer to the type plate at the rear or bottom of the product for identification and supply ratings TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet Optional Connections S VIDEO IN AUDIO E carr i VIDEO iN J VCR or Cable E Satellite Box SCART OUT E Connecting audio from an analog audio video device You can connect the audio output from an analog audio video device e g VCR Cable Satellite Box to this Home
16. 60 gt OFF gt 15 3 Before the system switches to standby mode a countdown of 10 seconds is displayed To check or change the setting Press SLEEP once to show the remaining time before switching off If you continue pressing the SLEEP button the next sleep timer option will appear To cancel the sleep timer Press SLEEP repeatedly until OFF appears or press the STANDBY ON 39 Troubleshooting WARNING Under no circumstances should you try to repair the system yourself as this will invalidate the warranty Do not open the system as there is a risk of electric shock If a fault occurs first check the points listed below before taking the system for repair If you are unable to solve a problem by following these instructions consult your dealer for help Problem General Solution No power Check if the AC power cord is properly connected Press the STANDBY ON to turn on the power No picture Refer to your TV s manual for correct Video In channel selection Change the TV channel until you see the DVD screen Press the DISC button to select disc mode f this happens when you are turning on the progressive scan feature wait for 5 seconds for the auto recovery Completely distorted picture If this happens when you are changing the setting of or black white picture the TV SYSTEM wait for 15 seconds for the auto recovery Check the video connection Som
17. COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER PLEASE CONTACT OUR CUSTOMER SERVICE CENTER This product incorporates copyright protec tion technology that is protected by method claims of certain U S patents and other intel lectual property rights owned by Microvision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited view ing uses only unless otherwise authorized by Marcrovision Corporation Reverse engineering or disassembly is prohibited DO DIGITAL Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation ATTENTION For Customer Use Read carefully the information located at the bottom or rear of your DVD Home Theatre System and enter below the Serial No Retain this information for future reference Model No MRDIOO Serial No Language Code Abkhazian 6566 Inupiaq 7375 Pushto 8083 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 slenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto Romance 8277 Arabic 6582 Writ 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486 Samoan 8377 Avestan 6569 Kalaa
18. E Exits an operation DISC stops playback or clears programed track TUNER erase the current preset radio station 5 DISC MENU For DVD enter or exit disc contents menu For VCD 2 0 enter digest menu 6 TITLE Access the title menu if there is one 7 VOLUME Adjusts the volume level MUTE Mutes or restores the volume 9 SURROUND Selects multi channel surround or stereo mode SOUND Selects a preferined sound effect SUBTITLE Selects a DVD subtitle language 2 ANGLE Selects a DVD disc camera angle if available 3 SLEEP Sets the sleep timer function OPEN CLOSE 4 Open or close the disc tray 5 REW lt lt FFWD gt gt DISC fast backward and forward search TUNER tune the radio frequency down up PREV I4 NEXT Pi DISC direct access the previous next chapter or track TUNER select a preset radio station 7 SETUP Enters or exits the system setup menu ORLE DA DISC selects movement direction in the menu TUNER press left or right to select a preset radio station 9 OK Confirms a selection DISPLAY Displays the current status or disc information Numeric Keypad 0 9 Enters a track title number of the disc Enters a number of a preset radio station REPEAT A B Repeats a specific section on a disc Q3 REPEAT Selects various repeat m
19. R TV AUX DI PREV STOP NEXT p A R TITLE E DISPLAY e B a a Turning off to Standby mode O Press STANDBY ON gt The display screen will turn off Getting Started Step 2 Finding the correct viewing channel Before you start Make sure you have completed all the necessary connections before proceeding Press SOURCE button until DISC appears on the display panel Turn on the TV and set it to the correct video in channel You should see the blue DVD background screen on the TV 3 You may go to Channel on your TV then press the Channel Down button on your TV s remote control until you see the Video In channel gt You may press button repeatedly on your TV s remote control 3 Usually this channel is between the lowest and highest channels and may be called FRONT A V IN VIDEO See your TV manual for more details Getting Started continued Step 3 Setting language preferences The language options are different depending on your country or region It may not correspond to the illustrations shown on the user manual On screen display OSD language The OSD On Screen Display language for this DVD system will remain as you have set it regardless of the changes made to the DVD disc language aD In DISC mode press SETUP on the remote control gt Use 4 PA Y keys on the remote control to navigate in the menu O Highlight icon and press
20. User Manual MAGNAVOX SMART VERY SMART User Manual Manual del usuario 44 Manual do Usu rio MRD100 DVD VIDEO HOME THEATER SYSTEM 82 M xico Es necesario que lea cuidadosamente su instructivo de manejo PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO ATENCION PARA EVITAR EL RIESGO DE CHOQUE ELECTRICO NO QUITE LA TAPA EN CASO DE REQUERIR SERVICIO DIRIJASE AL PERSONAL AUTORIZADO DE PHILIPS Descripti n Reproductor de Disco de Video Digital Modelo MRDIOO Alimentac n 110 127V 220 240V 50 60Hz Consumo 35W Importador Philips Mexicana S A de C V Domicilio Av La Palma No 6 Col San Fernando La Herradura Huixquilucan Edo de Mexico C P 52784 Mexico Localidad y Tel Tel 52 69 90 00 Exportador Philips Electronics HK Ltd Pa s de Origen China N de Serie LEA CUICADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO LASER Type Semiconductor laser GaAlAs 650 660 nm DVD 784 796 nm CD 7 mW DVD 10 mW VCD CD 60 degrees Wave length Output Power Beam divergence CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT IF THERE ARE QUESTIONS REGARDING OUR TV SET
21. a desired folder and press OK to open the folder Use A Y keys to select a track file and press OK to start playback 3 Playback will start from the selected file and continue through to the end of the folder O You can also use the numeric keypad 0 9 to enter your choice TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 29 Disc Operations continued During playback you can TT TETE Playing MP3 music and JPEG O Press IM Pl to playback previous next pictures simultaneously track file in the current folder O Press lt lt gt P to fast reverse forward You can create a musical slide show if the search for a music track disc contains both the MP3 music and O Press REPEAT repeatedly to access PP various play modes p Insert an MP3 disc that contains music To stop playback press STOP Bl and pictures O Select an MP3 track in the menu and gt MP3 is selected appears on the TV During playback press ZOOM repeatedly to select ZOOM ON or O Use AY keys to select a picture file then press OK ZOOM OFF gt In ZOOM ON mode press PP or To stop simultaneous playback press lt 4 to zoom in or zoom out the image STOP HB O Use lt gt A Y keys to pan through the 3 The picture and MP3 music playback zoomed image will stop Helbful Hints mpi Due to the rec
22. as Step 5 Connecting the power cord Optional Connections Connecting audio from an analog audio video device Connecting digital audio equipment Getting Started 19 24 Step Turning on the DVD system Turning off to standby mode Step 2 Finding the correct viewing channel Step 3 Setting language preferences On screen display OSD language Audio Subtitle and Menu language for DVD playback Step 4 Setting the TV Selecting the matching color system Setting the TV Display Step 5 Setting up progressive scan feature Step 6 Setting the speakers channels Speakers delay time Speakers volume output level Disc Playback Disc Operations RR n 25 30 Playable discs a Playing a disc Basic playback controls Selecting various repeat functions Repeating play mode Repeating a selection within a chapter track E Programming dise tnacks c costae DN RIDE oe IPSO EQ en A metis ia Table of contents Other playback features Using the Disc Menu Using the Title Menu Viewing playback information Resuming playback from the last stopped point LO i Changing subtitle language DVD only Changing sound track language Switching camera angles Playing an MP3 JPEG disc Zoom picture Rotating flipping the picture Playing MP3 music and
23. d experience to automotive sound While conventional surround programming is fully compatible with Dolby Surround Pro Logic Il decoders sound tracks will be able to be encoded specifically to take full advantage of Pro Logic Il playback including separate left and right surround channels Such material is also compatible with conventional Pro Logic decoders 42 JPEG A very common digital still picture format A still picture data compression system proposed by the Joint Photographic Expert Group which features a small decrease in image quality in spite of its high compression ratio MP3 A file format with a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group or MPEG 1 Audio Layer3 By using the MP3 format one CD R or CD RW can contain about 10 times more data than a regular CD Multi channel DVDs are formatted to have each sound track constitute one sound field Multi channel refers to a structure of sound tracks having three or more channels Playback control PBC Refers to the signal recorded on video CDs or SVCDs for controlling playback By using menu screens recorded on a Video CD or SVCD that supports PBC you can enjoy interactive playback and searching Region code A system allowing discs to be played only in the region designated This unit will only play discs that have compatible region codes You can find the region code of your unit by looking at the pr
24. e For some DVDs the subtitle audio menu language can only be changed via the DVD disc menu Getti ng Started continued Step 4 Setting the TV Selecting the matching color system The color system of the DVD system DVD and TV should match Only then will it be possible to play a DVD on this system Before changing the TV system determine the color system of your TV O In DISC mode press SETUP on the remote control Use d PA Y keys on the remote control to navigate in the menu O Highlight HN icon and press Y Move to EJ and press P gt Move to TV SYSTEM and press gt AUTO n PROGRESSIVE NIS Y SCR SAVER SMART POWER SETTO NTSC AUTO Select this if the connected TV is compatible with both NTSC and PAL multi system The output format will be in accordance with the video signal of the disc NTSC Select this if the connected TV has the NTSC color system It will change the video signal of a PAL disc and output it to NTSC format TIPS The underlined option is the factory default setting Press lt to go back to the previous menu item Press SETUP to exit the menu 21 Getting Started continued PAL Select this if the connected TV has the PAL color system It will change the video signal of an NTSC disc and output it to Setting the TV Display Set the aspect ratio of the DVD system according to the TV type you have connected The fo
25. e progressive scan mode on your TV Turn on your TV progressive scan mode refer to your TV s user manual 3 A message appears on the TV Confirm your action by selecting the OK in the menu and press OK 3 The setup is now completed and you can start to enjoy the high quality picture If no picture is displayed Press and hold OPEN CLOSE on the front panel O Press number key to deactivate the progressive scan 3 The DVD background menu appears Helpful Hint There are some progressive scan TVs and High Definition TVs that are not fully compatible with this unit resulting in an unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode In this case turn off the progressive scan feature on both the DVD system and your TV TIPS Press 4 to go back to the previous menu item Press SETUP to exit the menu 23 Getting Started continued Step 6 Setting the speakers channels You can adjust the delay times center and rear only and volume level center rear and subwoofer for individual speakers These adjustments let you optimise the sound according to your surroundings and setup Speakers delay time In DISC mode press SETUP on the remote control gt Use 4 P A Y keys on the remote control to navigate in the menu O Highlight HN icon and press V Move to fd and press P gt To help your judge the sound level while adjusting the s
26. etimes a small amount of picture distortion may appear This is not a malfunction Clean the disc No sound or distorted sound Adjust the volume Check the speaker connections and settings Make sure that the audio cables are connected and press the SOURCE button to select the correct input source for example TUNER or TV AUX DI to choose the device that you want to hear through the DVD system When playback of DTS track press AUDIO to select other audio track There is no sound from the Make sure that the center and rear speakers are center and rear speakers connected correctly Press the SURROUND button to select a correct surround sound setting Make sure that the source you are playing is recorded or broadcast in surround sound Dolby Digital etc 40 Problem Playback The remote control does not function properly The DVD system does not start playback The aspect ratio of the screen cannot be changed even though you have set the TV display Cannot activate some features such as Angles Subtitles or multi language Audio Not able to select some items in the setup system menu Radio reception is poor The DVD system does not work Troubleshooting continued Solution Select the source you want to play for example DISC or TUNER beforepressing the function button gt lt lt p gt Reduce the distance between the remote control and the system
27. h the playback will pause IMPORTANT Some operations may be different or restricted depending on the disc format Refer to the jacket or case of the disc you are playing Changing the Subtitle Language and Audio Language from the menu bar will only apply to the current disc it will not change the default preset O In DISC mode press SETUP on the remote control gt The menu bar appears across the top of the TV a Da M T C O Qa 4 Ori 4 ee M Q es O Use 4 P A Y keys to navigate in the menu gt Press lt D to move through the menu bar gt Press Y to enter the selection If there are multiple choices available press V repeatedly to select Press SETUP again to exit the menu SUBTITLE Select a subtitle language that is available on the DVD LANGUAGE DVD Select an audio soundtrack language that is available on the DVD VCD Select an audio channels LEFT VOCAL RIGHT VOCAL MONO LEFT MONO RIGHT or STEREO SLOW Select a slow playback speed The volume will be muted To resume normal playback press PAI DVD SFX2 SFX4 SFX8 SRX2 SRX4 SRX8 PLAY VCD SFXI SFX2 SFX3 PLAY SF Slow Forward SR Slow Reverse FAST REVERSE FR DVD MP3 FRX2 FRX4 FRX6 FRX8 PLAY VCD CD FRXI FRX2 FRX3 FRX4 PLAY FAST FORWARD FF DVD MP3 FFX2 FFX4 FFX6 FFX8 PLAY VCD CD FFXI FFX2 FFX3 FFX4 PLAY Select a search speed FR backward FF forward The
28. he inhibit icon appears on the TV screen when a button is COMPACT pressed it means the function is not a available on the current disc or at VIDEO DVD R DVD ReWritable the current time dise compact dise dise Do not put any objects other than GITAL VIDEO DIGITAL AUDIO ReWritable discs on the disc tray Doing so may cause the disc player to malfunction Playing a disc Your DVD home theater system will play Digital Versatile Discs DVDs Video CDs VCDs Super Video CDs SVCDs Finalized DVD Recordable DVD R Turn on the TV to the Video In channel Press SOURCE repeatedly until DISC appears on the display panel or press DISC on the remote control DVD Rewritable DVD RW for the DVD system e g EXT 0 AV Audio Compact Discs CDs 3 You should see the blue DVD MP3 discs picture JPEG files on background screen on the TV CD R W O Press OPEN CLOSE A to open the JPG ISO 9660 format disc tray and load a disc then press the Maximum 12 characters display same button again to close the disc tray Supported sampling frequencies gt Make sure the disc label is facing up 32 kHz 44 1 kHz 48 kHz For double sided discs load the side Supported Bit rates 32 256 kbps which you want to play facing up variable bit rates Playback will start automatically gt If a disc menu shows on the TV see page 27 on Using the Di
29. itle languages TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs Changing sound track language This operation works only on DVDs with multiple soundtrack languages you can change the language you want while playing a DVD Press AUDIO repeatedly to select the available audio languages For VCD changing the audio Disc Operations continued Playing an MP3 JPEG disc This DVD system can playback most of the MP3 and JPEG files recorded on a CD R RW disc or commercial CD Before you start Turn on your TV to the correct Video In channel See the section on Finding the correct viewing channel channel O Press AUDIO repeatedly to select the available audio channels provided by the disc LEFT VOCAL gt RIGHT VOCAL MONO LEFT MONO RIGHT STEREO Switching camera angles This option is only available with DVDs that contain sequences recorded from different camera angles This allows you to view the picture from different angles O Insert a disc 3 The disc reading time may exceed 30 seconds due to the complexity of the directory file configuration 3 The disc menu appears on the TV If not press DISC MENU on the remote control DATA CD MENU O Press ANGLE repeatedly to select the available camera angles O If the disc main menu contains various folders use gt A Y keys to select
30. llisut 7576 Sango 8371 Aymara 6589 Kannada 7578 Sanskrit 8365 Azerhaijani 6590 Kashmiri 7583 Sardinian 8367 Bahasa Melayu 7783 Kazakh 7575 Serbian 8382 Bashkir 6665 Kernewek 7587 Shona 8378 Belarusian 6669 Khmer 7577 Shqip 8381 Bengali 6678 Kinyarwanda 8287 Sindhi 8368 Bihari 6672 Kirghiz 7589 Sinhalese 8373 Bislama 6673 Komi 7586 Slovensky 8373 Bokm l Norwegian 7866 Korean 7579 Slovenian 8376 Bosanski 6683 Kuanyama Kwanyama 7574 Somali 8379 Brezhoneg 6682 Kurdish 7585 Sotho Southern 8384 Bulgarian 6671 Lao 7679 South Ndebele 7882 Burmese 7789 Latina 7665 Sundanese 8385 Castellano Espa ol 6983 Latvian 7686 Suomi 7073 Catal n 6765 Letzeburgesch 7666 Swahili 8387 Chamorro 6772 Limburgan Limburger 7673 Swati 8383 Chechen 6769 Lingala 7678 Svenska 8386 Chewa Chichewa Nyanja 7889 Lithuanian 7684 Tagalog 8476 m X 9072 Luxembourgish 7666 Tahitian 8489 Chuang Zhuang 9065 Macedonian 7775 Tajik 8471 Church Slavic Slavonic 6785 Malagasy 7771 Tamil 8465 Chuvash 6786 Magyar 7285 Tatar 8484 Corsican 6779 Malayalam 7776 Telugu 8469 Cesky 6783 Maltese 7784 Thai 8472 Dansk 6865 Manx 7186 Tibetan 6679 Deutsch 6869 Maori 7773 Tigrinya 8473 Dzongkha 6890 Marathi 7782 Tonga Tonga Islands 8479 English 6978 Marshallese TII Tsonga 8483 Esperanto 6979 Moldavian 7779 Tswana 8478 Estonian 6984 Mongolian 7778 T rkce 8482 Euskara 6985 Nauru 7865 Turkmen 8475 EAAnvika 6976 Navaho Navajo 7886 Twi 8487 Faroese 7079 Ndebele North 7868 Uighur 8571 Fran ais
31. nnections continued FRONT FRONT RIGHT LEFT CENTER VN t IIA e y SUBWOOFER REAR REAR RIGHT LEET Step 2 Connecting the speakers and subwoofer Connect all the speakers and subwoofer to the speaker jacks at the rear of the DVD system Make sure that the colors of the plugs and jacks are matched Helpful Hint To prevent unwanted noise do not place the rear speakers too close to the DVD system AC power adapter TV or any other radiation sources TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet 14 Basic Connections continued Po p Y sor i COMPONENT mom mL om ME EN A Option Using Composite Video Step 3 Connecting to TV jacks CVBS This connection enables you to view the O Use the supplied composite video cable playback from this DVD system You yellow to connect the VIDEO OUT only need to choose one of the options jack on the DVD system to the video below to make your video connection input jack or labeled as A V In Video In For a standard TV follow option 1 Composite or Baseband on the TV For a progressive scan TV follow option 2 IMPORTANT Connect the DVD system directly to the TV Helpful Hint To hear the TV channels through this DVD system connect the AUDIO IN TV IN jacks to the corresponding AUDIO output jacks on
32. o make your selection then press OK to start playback Helpful Hint Depending on the DVD disc you may not be able to select the title menu Viewing playback information This DVD system can display the disc playback information for example title or chapter number elapsed playing time without interrupting disc playback During playback press DISPLAY DVD TITLE NUMBER CHAPTER NUMBER TITLE ELAPSED gt TITLE REMAIN gt CHAPTER ELAPSED gt CHAPTER REMAIN OFF VCD PBC OFF SVCD CD SINGLE ELAPSED SINGLE REMAIN TOTAL ELAPSED TOTAL REMAIN gt OFF MP3 TRACK ELAPSED TRACK REMAIN OFF playback from the last stopped point To cancel the resume mode When play is stopped press M again Helpful Hint Opening the disc tray or disconnecting the DVD system from the power supply will cancel the resume option This option allows you to enlarge the picture on the TV screen and to pan through the enlarged picture During playback press ZOOM on the remote control repeatedly to select a different zoom factor gt Use 4 P A Y keys to move through the zoomed image 3 Playback will continue O Press ZOOM repeatedly to return to the original size Changing subtitle language DVD only This operation works only on DVDs with multiple subtitle languages You can change the language you want while playing a DVD O Press SUBTITLE repeatedly to select different subt
33. odes turns off repeat mode PROGRAM DISC starts programming TUNER hold down this button to start automatic manual preset programming TV VOLUME Adjusts TV volume Philips TV only Remote Control continued O o 5 E E m E I E ES S 2 m gt gt gt E an A 3 S 3 2 z a Q D D Bs OO 40 D 8999 lt o E m SURROUND PROGRAM SUBTITLE ANGLE ZOOM AUDIO SOUND a e m m s 998 9009 O L3 DIM L3 MAGNAVOX AUDIO Selects an audio language DVD or an audio channel VCD ZOOM Enlarges a picture on the TV screen DIM Selects different level of brightness for display panel Remote Control continued I eel CAUTION Using the remote control Remove batteries if they are exhausted or if the remote control is not to be used for a long time Do not mix batteries old and new or carbon and alkaline etc Batteries contain chemical substances so they should be disposed of properly Open the battery compartment O Insert two batteries type R03 or AAA following the indications inside the compartment Close the cover Point the remote control directly at the remote sensor iR on the front panel Select the source you wish to control by pressing the DISC TUNER but
34. oduct label Some discs are compatible with more than one region or ALL regions Surround A system for creating realistic three dimensional sound fields full of realism by arranging multiple speakers around the listener Title The longest section of a movie or music feature on DVD Each title is assigned a title number enabling you to locate the title you want VIDEO OUT jack Yellow jack on the back of the DVD system that sends the DVD picture video to a TV Specifications AMPLIFIER MAIN UNIT Output power 100 W Power Supply Rating 110 127 V 220 240 V Front 15 W channel 50 60 Hz Rear 15 W channel Power Consumption 35 W Center 15 W RMS Dimensions 360 x 48 x 339 mm Subwoofer 25 W RMS wx hx d Frequency Response 20 Hz 20 kHz 3 dB Weight 2 18 kg Signal to Noise Ratio gt 60 dB CCIR Input Sensitivity SPEAKERS AUX In 500 mV FRONT and REAR speakers System l way closed box system TUNER Impedance 40 Tuning Range FM 87 5 108 MHz Speaker drivers 3 full range 50 100 kHz Frequency response 150 Hz 20 kHz AM 531 1602 kHz 9 kHz Dimensions 100 x 95 x 83 mm AM 530 1710 kHz 10kHz wx hx d 26 dB Quieting Weight 0 52 kg each Sensitivity FM22dBf AM5000uV m Center speaker IF Rejection Ratio FM 60 dB AM 24 dB System l way closed box system Signal to Noise Ratio FM 50 dB AM 30 dB Impedance 40 AM Suppression Ratio FM 30 dB Speaker drivers 3 full range Harmonic
35. ontrol Press VOLUME on the setor remote control to increase or decrease the volume level gt VOL MIN is the minimum volume level and VOL MAX is the maximum volume level To turn off the volume temporarily Press MUTE on the remote control gt Playback will continue without sound and MUTE appears gt To restore the volume press MUTE again or increase the volume level Controlling PHILIPS TV with the remote control This DVD system s remote control enables you to control the basic functions of your PHILIPS brand TV swoson openyeLosN Ep wu REW PLAY PAUSE FFWD Be B Bas SUME ANGLE ZOOM AUDIO Bee o SLEEP MAGNAVOX SS Press SOURCE repeatedly until TV appears on the display panel or press TV AUX DI on the remote control repeatedly O Use I4 Pl keys or the numeric keypad 0 9 to select the TV s channel Press TV VOLUME to adjust the TV s volume level Other Features Dimming system s display screen In any active mode press DIM on the remote control to select desired brightness HIGH MID or LOW HIGH is default setting Setting the sleep timer The sleep timer enables the system to switch to standby mode automatically at a preset time Press SLEEP repeatedly until it reaches the desired preset turn off time 3 The selections are as follows time in minutes 15 gt 30 gt 45 gt
36. ording nature of Digital Rotating fl th t PIDE pt Audio MP3 DAM only digital music will 9 During playback use d gt A Y keys to play lt is normal to experience an occasional rotate flip the picture on the TV b skib while listening to your MP3 disc flip the picture vertically It is normal to experience an occasional V flip the picture horizontally pixelation during MP3 playback due to poor lt rotate the picture anti clockwise clarity of digital contents during internet P rotate the picture clockwise downloading Only the first session of a multi session CD Helpful Hint will be played back It may require longer time for the DVD lt may not be possible to play certain MP3 system to display the disc content on the TV or JPEG disc due to the configuration and due to the large number of songs pictures characteristics of the disc or condition of the compiled into one disc record If the disc menu doesn t appear on the screen press DISC MENU to turn on the menu TIPS Some discs cannot be played on this player due to the configuration and characteristics of the disc or due to the condition of recording and authoring software that was used 30 DVD Setup Menu Options Using the menu bar You can continue a number of operations directly via the multiple menu bars on the TV screen without interrupting the disc playback The exception is when you enter HJ SETUP MENU after whic
37. p DEFAULTS RESETS see page 35 GO TO FEATURE SETUP PAGE DVD Setup Menu Options continued Picture Setup page underlined options are the factory default settings TV SHAPE TV SYSTEM PROGRESSIVE SCR SAVER SMART POWER The picture shape can be adjusted to fit your TV 4 3PS Fora full height picture with the sides trimmed 4 3 LB For a wide screen display with black bars on the top and bottom 16 9 For wide screen TV frame ratio 16 9 Selects the color system that matches the connected TV It will enable playback of a different type of disc PAL or NTSC disc on this DVD system AUTO For TV that is compatible with both PAL and NTSC NTSC For NTSC system TV PAL For PAL system TV Before enabling the progressive scan feature you must ensure that your TV can accept progressive signals and you have connected this DVD system to your TV using the Y Pb Pr jacks OFF Disables the progressive scan mode ON Turns on progressive scan mode Read the instructions on the TV and confirm your action by pressing OK on the remote control Note For detailed progressive scan setting see page 23 The screen saver prevents damage to the TV screen by avoiding exposure to a static image for too long ON Switches to TV screen saver mode when playback has been stopped or paused for more than 5 minutes OFF Turns off the screen saver function This is a
38. peaker settings turn on the test tone Move to TEST TONE select ON Jin the menu Y REAR DELAY Ton O Use A Y to highlight one of the options below at a time then press P CNTR DELAY 3 Select this to set the delay time in relation to the listening position distance from the center speaker 5ms 3ms 2ms ms or OFF REAR DELAY Select this to set the delay time in relation to the listening position distance from the rear speakers l5ms 2ms 9ms 6ms 3ms or OFF Use 4 P keys to set the delay times that best suit your surround sound needs Press OK to confirm Helpful Hints A Ims increase decrease of delay time is equivalent to 30 cm change in distance Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers Speakers volume output level In DISC mode press SETUP on the remote control O Press P to select icon TRIM LEVEL wasi O Press Y to select REAR SPEAKER CENTER SPEAKER or SUBWOOFER Press VOLUME to adjust the output level between 10dB 10dB Helpful Hint If you have selected Stereo mode adjusting the center and rear speakers volume level will have no effect TIPS The underlined option is the factory default setting Press lt to go back to the previous menu item Press SETUP to exit the menu Disc Operations TT IMPORTANT Playable discs If t
39. power saving feature The DVD system will automatically switch to standby mode if you do not press any buttons within 15 minutes after a disc has stopped playing OFF Turns off the smart power function ON Switches to standby mode if no actions are performed within 15 minutes in disc stop mode DVD Setup Menu Options continued Sound Setup Page underlined options are the factory default settings NIGHT MODE CNTR DELAY REAR DELAY TEST TONE This mode optimizes playback of sound at low volume High volume outputs will be softened and low volume outputs will be enhanced to an audible level This feature is only applicable for DVD video discs with Dolby Digital mode OFF Turns off night mode feature Selects this to enjoy the surround sound with its full dynamic range ON Turns on night mode Set the delay time in relation to the listening position distance from the center speaker Use lt gt keys to set the delay times 5ms 3ms 2ms Ims or OFF and press OK to confirm Set the delay time in relation to the listening position distance from the rear speakers Use lt D keys to set the delay times I5ms 12ms 9ms 6ms 3ms or OFF and press OK to confirm Note ms increase decrease of delay time is equivalent to 30 cm change in distance Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers This feature helps you to judge the so
40. r the Parental Control Enter your four digit password to play a prohibited disc or when prompted for a password The default password is 1234 To change the password 1 Highlight PASSWORD and press P 2 Use the numeric keypad 0 9 to enter your existing four digit password at Enter old code Note When doing this for the first time key in 1234 If you forget your existing password press Bl 4 times to restore to the default password 1234 3 Enter the new four digit password at Enter new code 4 Enter the same new four digit password again at Confirm code Select the menu language for this DVD system s on screen display Default language is English This feature enables you to reset all the setup menu options and your personal settings to factory defaults except your password and parental setting Press P gt to select RESET Tuner Operations IMPORTANT Make sure the FM and AM antennas are connected Tuning to radio stations Press SOURCE repeatedly until FM appears on the display panel or press TUNER on the remote control O Press and hold lt lt DD on the remote control until the frequency indication starts to change then release gt The next radio station will tune automatically To fine tune the reception of a weak station press lt lt 4 gt P briefly and repeatedly until an optimal reception is found Presetting radio stations
41. reset radio stations MAGNAVOX Press TUNER to select FM or AM band O Press and hold PROGRAM until AUTO appears on the display panel 3 All previously stored radio stations will be replaced Using manual preset Use manual presetting to store your favorite radio stations Tune to your desired radio station see Tuning to radio stations O Press PROGRAM Use 4 P keys to select a preset number that you want to store the current radio station or use the numeric keypad on the remote control to enter your choice Press PROGRAM to store Selecting a preset radio station Press TUNER to select FM or AM band O Use lt gt or 14 Pl keys to select a preset radio stations 3 The preset number followed by waveband and radio frequency will appear on the display panel Deleting a preset radio station O In tuner mode use lt gt or I4 Pl keys to select a preset radio station O Press E gt DELETED appears gt The current preset radio station will be deleted Changing tuning grid not available for all versions In some countries the frequency step between adjacent channels in the AM FM band is 9 kHz 50 kHz 10 kHz 100 kHz in some areas IMPORTANT Changing the tuning grid will erase all previously stored preset radio stations O In tuner mode press and hold PII for more than 5 seconds the display will show
42. rmat you select must be available on the disc If it is not the setting for TV display will not affect the picture during playback PAL format Select one of the options and press OK to confirm 3 Follow the instructions shown on the TV to confirm the selection if any gt If a blank distorted TV screen appears wait for 5 seconds for the auto recovery In DISC mode press SETUP on the remote control gt Use d PA Y keys on the remote control to navigate in the menu O Highlight HN icon and press Y Move to EJ and press P gt Move to TV SHAPE and press P TV SYSTEM PROGRESSIVE SCR SAVER SMART POWER SET TO PAN SCAN 4 3 PS f Select this if you have a conventional TV and want both sides of the picture to be trimmed or formatted to fit your TV screen 4 3 LB Select this if you have a conventional TV In this case a wide picture with black bands on the upper and lower portions of the TV screen will be displayed 16 9 9 Select this if you have a wide screen TV Select one of the options and press OK to confirm TIPS The underlined option is the factory default setting Press lt to go back to the previous menu item Press SETUP to exit the menu 22 Step 5 Setting up Progressive Scan feature for Progressive Scan TV only The progressive scan displays twice the number of frames per second than interlaced scanning ordinary normal TV system Wi
43. sc Menu gt If the disc is locked by parental control you must enter your four digit password see page 35 gt See the following pages for more Helpful Hint lt may not be possible to play CD R RW in all cases due to the type of disc or condition of the recording Region Codes for DVD discs playback options and features DVD discs and players are designed with regional restrictions Before playing a Helpful Hint disc make sure the disc is for the same If you are having trouble playing a certain region as your player The regional code disc remove the disc and try a different one for this DVD system is indicated at the Improperly formatted discs will not play on rear panel this DVD system TIPS Some discs cannot be played on this player due to the configuration and characteristics of the disc or due to the condition of recording and authoring software that was used 25 Disc Operations continued Basic playback controls Pausing playback 9 During playback press BI gt To resume playback press BI again Selecting another track chapter O Press 4 Pl or use the numeric keypad 0 9 to key in a track chapter number gt If the repeat track chapter mode is active press Mi will replay the same track chapter Searching backward forward O Press 44 P gt While searching press lt lt gt repeatedly to increase the search speed 3 To resume normal playback press Pil
44. th nearly double the number of lines progressive scan offers higher picture resolution and quality Before you start Ensure that you have connected this DVD system to a progressive scan TV using the Y Pb Pr connection see Option 2 Connecting to a Progressive Scan TV or component video input Turn off your TV progressive scan mode or turn on to the interlaced mode refer to your TV s user manual Turn on the DVD system and press SOURCE button until DISC appears on the display panel Turn on the TV and set it to the correct video in channel 3 The blue DVD background screen will appear on the TV Press SETUP on the remote control gt Use d PA Y keys on the remote control to navigate in the menu O Highlight KN icon and press Y Move to EJ and press P gt Move to PROGRESSIVE select ON in the menu and press OK to confirm Getting Started continued ACTIVATING PROGRESSIVE SCAN 1 Ensure your TV has Progressive Scan 2 Connectusing YPrPb GBR video cables 3 Ifthere is a blank screen waitfor 15 seconds for auto recovery Read the notification message on the TV and confirm your action by selecting the in the menu and press OK gt If a blank distorted screen appears wait for 15 seconds for the auto recovery O Otherwise select CANCEL and press OK to go back to the previous menu There will be no picture on your TV at this state until you have turned on th
45. tions regarding disposal of packaging materials exhausted batteries and old equipment f MAGNAVOX Main Unit 1 STANDBY ON Turns on the system or turns off to standby mode 2 Disc tray 3 OPEN CLOSE 4 Opens closes the disc tray System display panel 5 Pill PLAY PAUSE DISC starts pauses playback TUNER starts auto tuner installation for first time setup SOURCE Selects the relevant active source mode DISC TUNER FM AM TV AUX or DI O COMO W STOP Exits an operation DISC stops playback or clears programed track TUNER erase the current preset radio station VOL AV Adjusts the volume level Remote Control mm OPEN CLOSE S TUNER TV AUX DI LAY PAUSE FFWD B da r MENU q KE ys D a Ea ER EA Ka ER ER REPEAT REPEAT Ea SURROUND PROGRAM 3 SOUND TV VOLUME SUBTITLE ANGLE ZOOM AUDIO SLEEP DIM 2 EX GOO MAGNAVOX d STANDBY ON Turns on the system or turns off to standby mode 2 Source buttons DISC switches to DISC mode TUNER toggles between FM and AM band TV AUX DI switches to TV or the external device which is connected to this system In TV mode the sound from the TV will output through the connected speakers system 3 PLAY PAUSE PI DISC starts pause playback STOP
46. ton on the remote control Q Then select the desired function for example lt lt DD Basic Connections Center speaker o Front speaker Front speaker Left Right o Rear speaker Subwoofer Rear speaker Left Right Helpful Hints The placement diagram shown here is only a guideline that will provide great system Step Placing the speakers This Home Theater System is simple to performance You may find other placement install However proper system choices that are more suitable for your room placement is critical to ensure an layout and provide the sound experience you optimum sound experience enjoy To avoid magnetic interference do not Place the front left and right speakers at e the front speakers too close to your equal distances from the TV and at an angle of approximately 45 degrees from the listening position The rear speakers are labeled as REAR LEFT or REAR RIGHT The front speakers are labeled as O Place the center speaker above the TV or FRONT LEFT or FRONT RIGHT the DVD system so that the center channel s sound is localized Place the rear speakers at normal listening ear level facing each other or hang on the wall Place the subwoofer at the corner of the room Keep at least one meter away from the TV TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet Basic Co
47. und level of each speaker OFF Turns off test tone ON Turns on test tone the test signal will be automatically generated when you set the speakers channels DVD Setup Menu Options continued Feature Setup Page underlined options are the factory default settings PARENTAL 4 MENU LANG DEFAULTS PLEASE ENTER PASSWORD PASSWORD PARENTAL lt MENU LANG Enter old code DEFAULTS PLEASE ENTER OLD PASSWORD MENU LANG DEFAULT This is to prohibit viewing of discs that had exceeded the limits you set It works only on the DVDs with parental level assigned to the complete disc or to certain scenes on the disc Highlight PARENTAL and press P Use the numeric keypad 0 9 to enter 1234 default password when you are asked to enter the four digit password You will have to enter the same code again to reconfirm Select a rating level and press OK Notes To change the password see PASSWORD DVDs that are rated higher than the level you selected will not be played unless you enter the same four digit password To disable Parental Control and have all discs play choose NO PARENTAL Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover The rating level feature does not prohibit playback of such Discs VCD SVCD CD have no level indication so parental control has no effect on these type of discs The password is used fo
48. volume will be muted To resume normal playback press Pll STATUS Allows viewing of the current status of the disc The information will vary depending on the disc format Available on DVD only TITLE SEARCH TITLE XX YY Select a Title for playback to begin CHAPTER SEARCH CHAPTER XX YY Select a Chapter for playback to begin XX Current title chapter number YY Total number of title chapter Use the numeric keypad 0 9 to change the XX number then press OK TIME SEARCH Use the numeric keypad 0 9 to enter the time hours minutes and seconds at which you want playback to begin for DVD CD or VCD with PBC OFF only ZOOM Select an enlarge picture ratio x1 5 x2 or x3 You can use lt P A V keys to move within the enlarged picture on the TV To resume normal playback select ZOOM OFF from the menu ANGLE for DVD only Select to view the same scene from different angles if the DVD is recorded with multiple angles STEP Select to advance the still picture one frame forward To resume normal playback press Pll PBC ON OFF for VCD2 0 with PBC feature Select between PBC ON and OFF PBC OFF the playback will start automatically PBC ON the disc menu if available will appear on the TV Use the numeric keypad 0 9 to enter your choice PROGRAM Stop playback then select this to enter the program menu see Programming disc tracks TRIM LEVEL

Magnavox MRD100 Home Theater System User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents