Kenwood VZ-7000N CRT Television User Manual
Contents
1. To prevent damage to the machine take the following precautions Make sure to ground the unit to a negative 12V DC power supply Do not open the top or bottom covers of the unit Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing Do not subject the faceplate to excessive shock as it is a piece of precision equipment When replacing a fuse only use a new one with the prescribed rating Using a fuse with the wrong rating may cause your unit to malfunction To prevent short circuits when replacing a fuse first disconnect the wiring harness Do not use any screws except for the ones provided The use of improper screws might result in damage to the main unit You cannot view video pictures whilst the vehicle is moving To enjoy TV video pictures find a safe place to park and engage the parking brake NOTE f you experience problems during installation consult your Kenwood dealer e f the unit does not seem to be working right try pressing the reset button first If that does not solve the problem consult your Kenwood dealer inch WIDE COLOR TELEVISION KENWOOD 7 inch WIDE COLOR TELEVISION Reset button e When a center unit is connected press the reset button of the center unit once Refer t2. gt gt to display the desired track file number Touch once to fast forward to the next track file twice to fast forward to the track file after that and so forth Play starts at the beginning of the displayed track file number Making a Reverse Track File Search Touch to display the desired track file number Touch once to search back to the beginning of the current track file twice to search back to the beginning of the previous track file and so forth Play starts at the beginning of the displayed track file number Folder Search Search forward or backward through the folders on the media Making a Forward Folder Search Touch to move to the next folder The unit plays the medium starts at the beginning of the selected folder If the selected folder contains no MP3 file the unit automatically plays the file nearest to that folder in the MP3 file playing order Making a Backward Folder Search Touch to move back to the previous folder The unit plays the medium starts at the beginning of the selected folder If the selected folder contains no MP3 file the unit automatically plays the file nearest to that folder in the MP3 file playing order Direct Track MP3 File Search Directly input the track file number that you want to listen to 1 Touch 0 9 input the number of the track file that you want to listen to If you make no further input in the 10 second pe
3. Angle Control Screen Touch ANGLE to switch to the angle control screen Ending the Screen Control Screen Touch OK NOTE If you make no touch operation for 10 seconds the Screen Control Screen is automatically canceled System Setup Function SET IIS PEAKE Rif iL VIDEO TOUCH SYSTEM ARE Alf i CLOCK EM TX ff Switching to the Setup Menu Screen 1 Press the FNC button on the monitor The source control screen is displayed Page 13 22 2 Touch MENU to switch to the setup menu screen Switching to the AV Setting Screen Touch AV SET to switch to the AV setting screen Page 8 Switching to the Speaker Setting Screen Touch SPEAKER to switch to the speaker setting screen Page 9 Switching to the System Setting Screen Touch SYSTEM to switch to the system setting screen Page 9 Switching to the FM Transmitter Setting Screen Touch FM TX to switch to the FM transmitter setting screen Page 10 NOTE When the Center unit is connected this function is not displayed Switching to the TV Area Setting Screen VZ 7000P only Touch TV AREA to switch to the TV area setting screen Page 10 Switching to the Video Setting Screen VZ 7000P only Touch VIDEO to switch to the video setting screen Page 11 Switching to the Clock Adjustment Screen Touch CLOCK to switch to
4. Side Touch 4 Tape play switches to the other side Direct Program Search System DPSS Skip backward and forward to other tracks during playback Skipping to the Beginning of Current Track or to Previous Tracks Rewind DPSS Touch 44 Touch once to rewind to the beginning of the current track twice to rewind to the beginning of the previous track and so forth You can skip up to nine tracks Playback is continued after the tape is rewound by the indicated number of tracks Skipping to the Later Tracks Fast Forward DPSS Touch P Touch once to fast forward to the next track twice to fast forward to the track after that and so forth You can skip up to nine tracks Playback is continued after the tape is fast forwarded by the indicated number of tracks The DPSS function knows where a track begins by detecting the blank space preceding it the space between tracks However when the blank space lasts for less than four seconds or contains noise DPSS may not operate correctly Furthermore quiet intervals within a song are detected as blank spaces if they last for four seconds or more Fast Forwarding the Tapes Touch gt gt The tape is being fast forwarded If the lt gt is touched normal tape will begin Rewinding the Tapes Touch lt lt The tape is being rewound If the lt gt is touched normal tape play will begin Switching to the Next Source Mode Touc
5. button Each time you press the SRC button the source mode switches NOTE The mode switches to the next mode from any mode which cannot be used The tuner mode CD mode tape mode and disc changer mode will differ depending on the unit that is connected Q H SRC button lt lt button gt button AV OUT button FNC button SP button MODE button VOLUME buttons Press the button to increase the volume Press the button to decrease the volume ATT button Turn down the volume quickly To return the volume to its original level press the button again SP button Switch to the built in speaker mode OPEN button Open Close the monitor NOTE The 3 button cannot be used Visual Function V SEL button Each time you press V SEL button the image video will switch between the navigation television and video MODE button Each time you press MODE button the screen mode Switches between the full zoom just cinema and normal FNC button Press the FNC button to switch the source control Screen Each time you press FNC button the back picture in the source control screen changes AV OUT button Each time you press AV OUT button the AV output mode switches between the normal television and video gt TV Control Function Operation available when the TV audio source is selected gt il button Each time you press the gt I
6. lists NOTE When all characters are displayed on the character list V and do not appear Touch AB ab 12 or A4 to switch the character lists 4 Touch a character 5 Continue steps 1 and 4 until all the characters have been input for the name NOTE You can enter up to 12 characters for each name To enter a space touch SPC 6 Touch OK to finish name entry and leave the name preset mode NOTE f you want to change the name of a station first display the name of the station following step 1 then change the letter s that you by following steps 1 and 4 You can assign names to up to 30 TV stations Names registered on this unit will not be displayed on the Center unit TV Control Function Touch the upper center to change the TV1 TV2 bands and Video savour KEN VOODI 8 SS 7 inch WIDE PLOR TELEVISION 77 2 Z inch TELEVISION C N Touch the left part to decrease the Touch the right part to increase the channel channel M J C N If the lower center of the screen is touched while a TV video picture is displayed the audio source picture settings video out settings etc are superimposed on the picture On Screen Display The display turns off when the lower center of the screen is press
7. 0 mV 1 KQ Analog RGB SIBDUt ee entre urere ee 0 7 Vp p 75 O BMAX ARC QUGN Gy Sect ee Erde en i ne er N 87 5MHz to 89 9MHz 100KHz STEP General Operating Voltage x t ote n eter dedere 14 4 V DC 11 to 16 V COnSUttie d CHE ebrei p Ex e RR EN e e egt ate tees 25A Operational temperature range nu en nn bar nn dete du 10 C to 60 C Storage temperatu re rage de eer ve re incl ees rice EU ph e 20 C to 85 C Size W x Hx D uscite denies anne 180 mm x 50mm x 191 5 mm Installation size W x H xD 178 mm x 50 mm x 165 mm MASS Al TC rr 1 82 kg TV Antenna Unit OUtputil pedale siat et guet ee os i a RR Rid e de distet itn 75 Q 3 5 minijack Operating REILE EA Re een E n E EEE Medel bead 14 4 V DC 11 to 16 V Gons med GUrTehbiss e te t aee aime ead ete 1 0A Cable l rig tho a te stet se ede a M Pr LP LI MI PE CRM UR t e LI M 5m Size W x H x D 50 mm x 14 5 mm x 500 mm JEEP 300 g x2 Although the effective pixels for the liquid crystal panel is given as 99 99 or more 0 01 of pixels may not light or may light incorrectly KENWOOD
8. 1 MODE WAUTO Setting of the automatic detection mode BNTSC Setting of the NTSC fixed mode WPAL Setting of the PAL fixed mode VD2 MODE WAUTO Setting of the automatic detection mode WNTSC Setting of the NTSC fixed mode WPAL Setting of the PAL fixed mode NOTE It may take time to enable the automatic detection when AUTO is set Ending the Video Setting Screen Touch RTN to return to the setup menu screen Clock Adjustment Screen CLOCK Aa A 12 00 Adjusting the Time CLOCK If the Center unit is not connected you can set the clock time Touch A to advance Touch A to advance the hours the minutes CLOCK Touch W to make the hours go back Touch to make the minutes go back Setting the Minutes to 00 Touch RESET to set the minutes to 00 NOTE Touch RESET while the minute is below 30 rounds it off and while the minute is 30 or more rounds it up Ending the Clock Adjustment Screen Touch RTN to return to the setup menu screen System Set Up Function Touch Panel Adjustment Screen TOUCH PANEL ADJUST UC ANCE LIMEIR E S E Adjusting the Touch Position The touch panel can be adjusted if the position touched and the operation performed do not match 1 Accurately touch the mark at the upper right 2 Accurately touch the mark at the lower left When the mark a
9. A button to increase the volume of the built in speaker Press the W button to decrease the volume of the built in speaker If the VOLUME CONTROL item is set to HEAD in the Speaker setting of System Setup Function page 9 Press the A button to increase the volume of the center unit Press the W button to decrease the volume of the center unit NORMAL CINEMA Screen Control Function Angle Control Screen ANGLE CTRL SCREEN ANGLE SLIDE Adjusting the Angle Position ANGLE Each time you touch gt the monitor slants back one step Each time you touch 4 the monitor slants forward one step PLU NOTE The angle can be adjusted in 9 steps The next time the monitor is opened it stops at the set location Adjusting the Slide Position SLIDE Touch gt to slide the monitor to the front Touch 4 to slide the monitor to the back NOTE The next time the monitor is opened it stops at the set location Turning the Automatic Open Close Function On Off AUTO OPEN CLOSE Touch ON or OFF to switch the function on and off BON Switch the ACC on off to open close the monitor MOFF X Use the OPEN CLOSE button to open close the monitor NOTE If the shift lever or other parts of the vehicle interfere with the monitor when it opens select OFF Switching to the Screen Control Screen T
10. AV Setting Screen Speaker Setting Screen Setting the Built In Speaker Mode Setting the Built In Speaker Level e Setting the Volume Control Ending the Speaker Setting Screen System Setting Screen e Setting the Touch Sensor Tone Setting the On Screen Display Function Ending the System Setting Screen FM Transmitter Setting Screen FM Transmitter Function On and Off Adjusting the FM Transmitter Frequency Ending the FM Transmitter Setting Screen TV Area Setting Screen VZ 7000P only Setting the TV Area Ending the TV Area Setting Screen Video Setting Screen VZ 7000P only Setting of the switching mode of input video signal types Ending the Video Setting Screen Clock Adjustment Screen Adjusting the Time Manually Ending the Clock Adjustment Screen Touch Panel Adjustment Screen Adjusting the Touch Position TV Control Function TV Control Screen Main Selecting the TV Preset Bands Selecting the Video Inputs Selecting the Channels e Station Preset Memory Recalling a Preset Station Switching to the TV Control Screen Shift Direct Access Tuning Switching to the Next Source Mode Switching to the Menu Screen Turning the Attenuator On Off TV Control Screen Shift Auto Memory En Selecting the Tuning Mode Switching to the TV List Screen Switching to the Name Set Screen Returning to the TV Control Screen Main TV List Screen S
11. KENWOOD 7 Inch WIDE TELEVISION VZ 7000P VZ 7000N INSTRUCTION MANUAL KENWOOD CORPORATION English Contents Before Use Safety Precautions Monitor Control Function Opening the Monitor Closing the Monitor Power Off Switching the Monitor s Picture Switching the Screen Mode Switching the AV Output e Switching to the Angle Screen Control Screen Turning the Monitor Picture Off Switching to the Source Control Screen Changing the Background of the Source Control Screen Picture Adjusting the Volume Screen Control Function Angle Control Screen Adjusting the Angle Position Adjusting the Slide Position Turning the Automatic Open Close Function On Off Switching to the Screen Control Screen Ending the Angle Control Screen Screen Control Screen Adjusting the Picture Quality Auto Dimmer Switching to the Angle Control Screen Ending the Screen Control Screen System Setup Function Setup Menu Screen Switching he Setup Menu Screen Switching he AV Setting Screen Switching he Speaker Setting Screen Switching he System Setting Screen Switching he FM Transmitter Setting Screen Switching he TV Area Setting Screen Switching he Video Setting Screen Switching he Clock Adjustment Screen Switching he Touch Panel Adjustment Screen Canceling the Setup Menu Screen AV Setting Screen Setting the Navigation Input e Setting the AV Output Setting the Video 2 Input Ending the
12. KTC DAB s i i DAB Control Function s instruction manual for DAB Control Screen 115 R Off DAB 12 00 BANDI P S D E gt I i Selecting the Bands Each time you touch BAND the band switches between the DAB1 DAB2 and DAB3 Switching Service Touch gt e to switch the service in the Ensemble one after another Touch 44 to switch the service in the reverse order Primary Secondary Switching The Primary and Secondary can be switched with services that are composed of more than one service components Each time you touch P S the Service components are switched NOTE The Primary is selected automatically when the Service is switched or the unit is turned off Recalling a Preset Service Touch the preset service number 1 6 for the desired service The number of the recalled service is displayed Switching to the Next Source Mode Touch SRC to switch to the next source control screen Switching to the Menu Screen Touch MENU to switch to the menu screen Turning the Attenuator On Off Turn down the volume quickly Touch ATT to switch the Attenuator on and off Remote Control Function KENWOOD gt Tov gt Il button button VOLUME buttons ATT button V SEL button OPEN button AME button contro unr 7 Basic Source Control Function SRC
13. Mode Switching to the Menu Screen Turning the Attenuator On Off DAB Control Function DAB Control Screen Selecting the Bands Switching Service Primary Secondary Switching Recalling a Preset Service Switching to the Next Source Mode Switching to the Menu Screen Turning the Attenuator On Off Remote Control Function Troubleshooting Guide Specifications The control screens shown in this manual are for explanation purposes only The actual screens and design differ cH Safety Precautions AWARNING To prevent injury and or fire take the following precautions Ensure that the unit is securely installed Otherwise it may fly out of place during collisions and other jolts When extending the ignition battery or ground wires make sure to use automotive grade wires or other cables with an area of 0 75mm AWG18 or more to prevent wire deterioration and damage to the wire coating To prevent short circuits never put or leave any metallic objects e g coins or metal tools inside the unit e f the unit starts to emit smoke or strange smells turn off the power immediately and consult your Kenwood dealer Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock The liquid crystal fluid may be dangerous to your health or even fatal If the liquid crystal fluid from the LCD contacts your body or clothing wash it off with soap immediately ACAUTION
14. No disc has been loaded in the disc magazine Load a disc into the disc magazine No disc has been loaded in the disc magazine Load a disc into the disc magazine The CD is quite dirty The CD is upside down The CD is scratched a lot Clean the CD and load it correctly Something is wrong with the disc magazine Or the unit is malfunctioning for some reason Check the disc magazine And then press the reset button on the unit If the ERROR 99 code does not disappear consult your nearest service center The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60 C 140 F stopping all operation gt Cool down the unit by opening the windows or turning on the air conditioner As the temperature falls below 60 C 140 F the disc will start playing again This is displayed when a center unit is in the Adjust mode During Headunit Adjusting is displayed buttons other than SRC ATT and MENU are disabled Specifications Specifications subject to change without notice Monitor Section PiGt re SIZ67 icc iq Seine ge d ait s 7 0 inches wide 154 1 mm x 87 0 mm Display system Transparent TN LCD pane Drive syste M oe ca Peru PX TFT active matrix system Number of pixel Si tpe con 336 960 pixels 480 H x 234 V x RGB Ettfectivespixels 4 25 m ende o b
15. Screen Setting the Touch Sensor Tone TV BEEP Touch ON or OFF to switch the function on and off BON Touch sensor tone is turned on OFF Touch sensor tone is turned off Setting the On Screen Display Function AUTO ON SCREEN Touch ON or OFF to switch the function between automatic and manual RON When a button on the main unit or remote control unit is pressed or the disc track is changed the audio source control information is temporarily superimposed on the picture mOFF X When the lower center of the screen is touched while a TV video picture is displayed the audio source control information is temporarily superimposed on the picture Ending the System Setting Screen Touch RTN to return to the setup menu screen System Setup Function FM Transmitter Setting Screen FM TX x EIC 12 dct FM TX 8 9 9 MHZ FM Transmitter Function On and Off If the Center unit is not connected you can use the FM transmitter function to hear the audio from the TV video played from your car FM radio Touch ON or OFF to switch the FM transmitter function on and off BON FM transmitter function is turned on BOFF FM transmitter function is turned off The sound from FM transmitter is monaural Adjusting the FM Transmitter Frequency When the FM transmitter function is turned on you can Switch the transmission frequency as follows Touch gt to in
16. ber 1 1 6 for the desired station The number of the recalled station is displayed The number of Preset stations depends on a center unit connected Direct Access Tuning When you know the frequency of the station that you want to listen to you can input it directly for quick access 1 Select the band by touching the FM or AM 2 Touch DIR is displayed for 10 seconds If you make no input in the 10 second period direct access tuning is automatically canceled 3 Enter the frequency of the desired station If you want to listen to an FM station at 92 1 MHz for example touch 0 9 2 and 1 If you want to listen to an AM station at 810 kHz for example touch 0 8 1 and O Canceling Direct Access Tuning Touch the DIR again CD Player Control Function CD Player Control Screen 15 R Chil MENU CD Track 1 22 F22 WAT TU ii D gt I 11 II IET NOTE Some keys are disabled depending on the functions of a unit connected When a slave CD player plays a disc the information display such as playing time and track No is not displayed Pausing and Restarting CD Play Touch gt H to make the disc pause Touch gt I again to start play again Track MP3 File Search Search forwards or backwards through the tracks files on the disc until you reach the one that you want to listen to Making a Forward Track File Search Touch
17. crease the frequency by one step Touch 4 to decrease the frequency by one step Be sure to select a frequency that is not the same as a broadcast station in your area The Auto Seek function on your car radio may not stop at the FM transmitter frequency In this case use the Manual Seek function to set the radio to the FM transmitter frequency f the hideaway unit is grounded the audio signal from the FM transmitter may be difficult to hear Ending the FM Transmitter Setting Screen Touch RTN to return to the setup menu screen TV Area Setting Screen VZ 7000P only EE ZIEHE Indonesia New Zealand LTV AREA SET Setting the TV Area Select the area for TV broadcast viewing Selecting the Preset Bands Touch the TV 1 or TV 2 button Selecting the Reception Area Touch the B1 m5 button Select the channel setting for your country as follows Singapore Malaysia Thailand Burnei PAL B G Hong Kong Indonesia PAL B G New Zealand Australia NOTE The reception area can be set for two separate preset bands TV1 and TV2 Ending the TV Area Setting Screen Touch RTN to return to the setup menu screen Video Setting Screen VZ 7000P only Setting of the switching mode of input video signal types This function switches between the automatic detection and the fixed detection for input signal types of VIDEO1 and VIDEO2 VD
18. e VIDEO 2 terminal the monitor image is switched to the image of the device connected to the VIDEO 2 IN terminal It becomes the video mode setting Operate the V SEL button when the image from the device connected to VIDEO 2 IN terminal is shown on the monitor It becomes the OFF mode setting Use this setting when there s nothing connected to the VIDEO 2 IN terminal Ending the AV Setting Screen Touch RTN to return to the setup menu screen mV D OFF Speaker Setting Screen TOHE SP LEVEL 10 VOLUME CONTROL LI HEAD TMONIT eS K Setting the Built In Speaker SP MODE mNORM Sound with monitor picture Sound with navigation OFF Switch off the built in speakers Setting the Built In Speaker Level SP LEVEL Touch gt to increase the volume Touch 4 to decrease the volume NOTE No display when the SP MODE is set to OFF Setting the Volume Control VOLUME CONTROL Switching the Volume Control with volume button on the monitor panel between the Volume Control of the center unit and that of the built in speaker mHEAD Volume Adjustment of the center unit mMONITOR Volume Adjustment of the built in speaker NOTE If a center unit is not connected the Volume Control setting is not displayed Ending the Speaker Setting Screen Touch RTN to return to the setup menu screen System Setting
19. e disc until you reach the one that you want to listen to Making a Forward Track Search Touch gt gt to display the desired track number Touch once to fast forward to the next track twice to fast forward to the track after that and so forth Play starts at the beginning of the displayed track number Making a Reverse Track Search Touch to display the desired track number Touch once to search back to the beginning of the current track twice to search back to the beginning of the previous track and so forth Play starts at the beginning of the displayed track number Group Search Search forward or backward through the groups on the media Making a Forward Group Search Touch to move to the next group The unit plays the medium starts at the beginning of the selected group If the selected group contains no song the unit automatically plays the file nearest to that group in the song playing order Making a Backward Group Search Touch to move back to the previous group The unit plays the medium starts at the beginning of the selected group If the selected group contains no song the unit automatically plays the file nearest to that folder in the song playing order Tape Player Control Function Tape Player Control Screen WAT TI SR D MENU TAPE PLAY 9999 S Eee B NR MTL REP 11 gt gt gt uz s Listening to the Other
20. ed again Tuning mode TV preset band Channel Screen mode AV output picture mode vo SS TV 1 P 1 10ch SNPS 12 00 Source control information FM AM Tuner Control Function S 5 MEM TUNER Mo i to switch to the next source control E 108 Switching to the Menu Screen AUTO1 INFO NEWS Touch MENU to switch to the menu screen Turning the Attenuator On Off Turn down the volumaqulekiy D Ei IIET Touch ATT to switch the Attenuator on and off During the PTY mode PTY SEARCH MODE is displayed Selecting the Bands Touch either FM or AM to select the band Each time you touch FM the band switches Touch AM to select the AM band Tuning The operation is as follows according to the Seek mode of a center unit Auto Seek Tuning AUTO1 Touch gt gt to seek increasing frequencies Touch 1 to seek decreasing frequencies Preset Station Seek Tuning AUTO2 Touch to move to the next preset station i e the one with the next highest number and to move to the last preset station i e the one with the next lowest number Manual Tuning MANU Touch to increase the frequency by one step Touch 1 to decrease the frequency by one step The ST indicator is displayed when stereo broadcasts are being received Recalling a Preset Station Touch the preset station num
21. el of the station currently being listened to You can then recall that station with a single touch of a button 1 Select the band station that you want to store 2 Hold down preset station number 1 6 on which you want to store the station for two seconds or more You can store 6 stations in each of the TV1 and TV2 bands Recalling a Preset Station Touch the preset station number 1 6 for the desired station The number of the recalled station is displayed Switching to the TV Control Screen Shift Touch 5 to switch the TV control screen Shift Direct Access Tuning When you know the channel of the station that you want to watch to you can input it directly for quick access 1 Select the band by touching the TV 2 Touch DIR is displayed for 10 seconds If you make no input in the 10 second period direct access tuning is automatically canceled 3 Enter the channel of the desired station If you want to watch to an 1 channel for example touch 0 and 1 Canceling Direct Access Tuning Touch the DIR again Switching to the Next Source Mode Touch SRC to switch to the next source control Screen Switching to the Menu Screen Touch MENU to switch to the menu screen Turning the Attenuator On Off Turn down the volume quickly Touch ATT to switch the Attenuator on and off TV Control Function TV Control Screen Shift 15 R MENU V
22. electing the Band List Selecting the Stati e Station Preset Memory Switching to the Display Returning to the Source Control Screen Name Set Screen Name set Selecting the Channels on the TV Picture Screen FM AM Tuner Control Function Tuner Control Screen Main Selecting the Bands Tuning Recalling a Preset Station Direct Access Tuning Switching to the Next Source Mode Switching to the Menu Screen Turning the Attenuator On Off CD Player Control Function CD Player Control Screen Pausing and Restarting CD Play Track MP3 file Search Folder Search Direct Track MP3 file Search Switching to the Next Source Mode Switching to the Menu Screen Turning the Attenuator On Off MD Player Control Function MD Player Control Screen Pausing and Restarting MD Play Track Search Group Search Direct Track Search Switching to the Next Source Mode Switching to the Menu Screen Turning the Attenuator On Off Tape Player Control Function Tape Player Control Screen Listening to the Other Side Direct Program Search System DPSS Fast Forwarding the Tapes Rewinding the Tapes Switching to the Next Source Mode Switching to the Menu Screen Turning the Attenuator On Off Disc Changer Control Function Disc Changer Control Screen Pausing and Restarting Disc Play Track Search Disc Search Direct Track Search Direct Disc Search Switching to the Next Source
23. en the power is turned on can be set Refer to the angle control screen on Page 7 Power Off Hold down the OPEN CLOSE button for one second or more to turn the set s power off Press the OPEN CLOSE button to turn the power on NOTE If a center unit is connected you cannot turn the Power on off on this unit Please operate the power on the center unit Switching the Monitor s Picture Each time you press the V SEL button the monitor s picture switches as follows NAV setting during RGB Television or Video from AV IN terminal v Navigation from I F terminal L NAV setting during AVIN Television or Video from AV IN terminal v Navigation from AV IN terminal NAV setting during OFF v Television or Video from AV IN terminal v Video from AV IN terminal NOTE When the VD2 MODE setting to VD the switching items become the picture from VIDEO 2 IN terminal Refer to AV setting screen page 8 ACAUTION You cannot view television and video pictures whilst the vehicle is moving To enjoy television and video pictures find a safe place to park and engage the parking brake English Monitor Control Function Switching the Screen Mode Each time you press the MODE button the screen mode switches as follows v FULL Full picture m
24. ep ee etie ettet osi etes teo Loca eet i le 99 9996 Pixel arrangement RGB striped arrangemen dace ei Maced oc Mech a EN nece LH o hE dcm Mo ER Cold cathode tube B iltin speaket ettet el land Raves 1W 40 mm x 20 mm TV Tuner Section Colorsystem eVZ 000Bs n eet PE NINE Reese PAL Color system VZ 7000N Pendet eee irte has Ran Pel ee RETE NTSC Channel se lection Systemi smen nann n RN TN DRE te ee EN HORS PLL frequency synthesizer system Television system amp Channel converge lt VZ 7000P gt Television system PAL B G PAL I PAL D Channel converge VHF 2 12ch 11ch 0 12ch 1 12ch UHF 21 69ch 21 69ch 28 69ch 21 69ch 13 57ch televisiomsysterri VZ 7000N x ene t tbt tata tae etn da ede Rec etel decease tese ee dee M Channelconvergez VzZz7000lN3 ost dede is ee deeem ite e edo ttes 2 13ch VHF 14 69 UHF Demoduration system Split carrier system Antenna InpUt uc release euere 4 ch diversity 75 Q 3 5 minijack External video input level RCA jacks AV in u a nassen ce ee eet dede EH e eds 1 Vp p 75 Q Ext rnaliaudio input level RCA Jacks AV in rccte ert RE aan nal 1V 22KQ External video input level RCA jacks Video2 in 1 Vp p 75 Q External Video output level RCA jacks AV out 1 Vp p 75 Q External Audio output level RCA jacks AV out enne rennen nnns 50
25. h SRC to switch to the next source control screen Switching to the Menu Screen Touch MENU to switch to the menu screen Turning the Attenuator On Off Turn down the volume quickly Touch ATT to switch the Attenuator on and off Disc Changer Control Function Disc Changer Control Screen NAT Tf SR Chil MENU CHANGER DISC CHANGER 1 Direct Track Search Directly input the track number that you want to listen to 1 Touch 0 9 input the number of the track that 012 00 you want to listen to If you make no further input in the 10 second period the number entry mode will automatically DID MD I be canceled 2 Touch either lt 4 or gt gt The track starts playing Direct Disc Search Di ly i he di h tt Pausing and Restarting Disc Play irectly input the disc number that you want to Touch gt I to make the disc pause Touch gt I again to start play again 1 Touch 0 9 input the number of the disk that you want to listen to NOTE If you make no further input in the 10 second When one disc has finished playing its last track the period the number entry mode will automatically next disc in the changer starts playing When the last be canceled disc in the changer has finished the player returns to 2 Touch either D Tor D the first disc and starts playing it The disc starts playing Track Search Switching to the Next Source M
26. ks forwards DISC buttons Press the AM button to search through the discs backwards Press the FM button to search through the discs forwards gt CD MD Control Function gt il button Press the gt Il button to make the disc pause Press the button to start play again TRACK buttons Press the button to search through the tracks backwards Press the button to search through the tracks forwards DISC buttons MP3 MD group Press the AM button to move to the next folder group Press the FM button to move back to the previous folder group Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring Before calling service first check the following table for possible problems PROBLEM The power does not turn on Nothing happens when the buttons are pressed The monitor does not open close No television video image appears The screen is dark The screen does not darken when the vehicle s lights are turned on AM FM radio reception is poor and or there is noise POSSIBLE CAUSE The fuse has blown SOLUTION After checking for short circuits in the cables replace the fuse with one having the same rating o ACC position on vehicle ignition The computer chip in the unit is not unctioning normally The parking brake is not engaged The unit is not connected to the pa
27. l button the tuning mode Switches to auto 1 to auto 2 and manual TUNE buttons Press the lt button to make decreasing seeks Press the gt gt button to make increasing seeks FM button Switch between the TV1 TV2 and video AME button 1 Selects the band for auto memory entry 2 Press the AME button 3 Press the gt button or 14 button to start auto memory entry Remote Control Function KENWOOD y FM button AM button button gt FM AM Tuner Control Function TUNE buttons Press the ka button to make decreasing seeks Press the gt l button to make increasing seeks FM button Select the FM bands AM button Select the AM band Tape Control Function gt Il button Plays the other side of the tape When pressed during fast forward and rewind this button stops the tape and starts playing it TRACK buttons Press the 1 button to start play again at the beginning of the current track Press the gt button to start play at the beginning of the next track FM AM buttons Press the AM button Rewinds the tape Press the FM button Fast forwards the tape Disc Changer Control Function gt Il button Press the gt button to make the disc pause Press the I button to start play again TRACK buttons Press the kd button to search through the tracks backwards Press the gt button to search through the trac
28. o the instruction manual of the center unit for the location of the reset button e f a center unit is connected do not use the reset button of this unit but press the reset button of the center unit Cleaning the Unit If the front panel gets dirty turn off the power and wipe the panel with a dry silicon cloth or soft cloth ACAUTION Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol They can scratch the surface of the panel and or remove the indicator letters Screen brightness during low temperatures When the temperature of the unit falls such as during winter the liquid crystal panel s screen will become darker than usual Normal brightness will return after using the monitor for a while Loading and Replacing the Batteries for the Remote ACAUTION Do not set the remote on hot places such as above the dashboard Loading and Replacing the Batteries 1 Use two AAA batteries Slide the cover while pressing downwards to remove it as illustrated 2 Insert the batteries with the and poles aligned properly following the illustration inside the case AWARNING Store unused batteries out of the reach of children Contact a doctor immediately if the battery is accidentally swallowed NOTE The provided batteries are intended for use in operation checking and their service life may be short When the remote cont
29. ode Search forwards or backwards through the tracks Touch SRC to switch to the next source control on the disc until you reach the one that you want screen to listen to Making a Forward Track Search Switching to the Menu Screen Touch gt gt to display the desired track number Eom F Touch once to fast forward to the next track twice to Touer MENU Tto switch to theimeny sereen fast forward to the track after that and so forth Turning the Attenuator On Off Play starts at the beginning of the displayed track number Turn down the volume quickly Making a Reverse Track Search Touch ATT to switch the Attenuator on and off Touch 1 to display the desired track number Touch once to search back to the beginning of the current track twice to search back to the beginning of the previous track and so forth Play starts at the beginning of the displayed track number Disc Search Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to Making a Forward Disc Search Touch D to display the desired disc number Each time D is touched the displayed disc number increases by one Play starts at the beginning of the displayed disc Making a Reverse Disc Search Touch D to display the desired disc number Each time D is touched the displayed disc number decreases by one Play starts at the beginning of the displayed disc Ref he
30. ode v ZOOM Zoom picture mode v JUST Just picture mode v c CINEMA Cinema picture mode v mon Wm KENWOOD woe gt Ee A GS NORMAL Normal picture mode Switching the AV Output Each time you press the V SEL button for one second or more AV output switches as follows V SEL MODE OPEN CLOSE NORMAL Picture sound with the monitor s picture TV or from the AV IN terminal v TV Picture sound of the television v VIDEO Picture sound input from the AV IN terminal Switching to the Angle Screen Control Screen Screen Mode _ Pressing the SCREEN button will cause the angle control screen monitor angle adjustment mode or Screen control screen screen adjustment mode to be displayed on the picture Page 7 Turning the Monitor Picture Off Hold down the SCREEN button for one second or more to turn the monitor s picture off The picture reappears when the one of the SCREEN MODE or V SEL buttons is pressed Switching to the Source Control Screen Press the FNC button to switch to the source control screen Page 13 22 Changing the Background of the Source Control Screen Picture Each time you press the FNC button you can select the background between 8 different patterns for the source control screen and menu screen Adjusting the Volume If the VOLUME CONTROL item is set to MONITOR in the Speaker setting of System Setup Function page 9 Press the
31. ouch SCREEN to switch to the screen control Screen Ending the Angle Control Screen Touch OK NOTE If you make no touch operation for 10 seconds the Angle Control Screen is automatically canceled Screen Control Screen SCREEN _ CTRL Adjusting the Picture Quality BRT Touch gt for a brighter screen Touch 4 for a darker screen TIN Touch gt for a stronger red level Touch for a stronger green level COL Touch gt for a deeper color Touch lt 4 for a paler color CONT Touch for stronger contrast Touch lt 4 for less contrast BLK Touch for less blackness Touch lt 4 for a stronger black level DIM Touch for a brighter screen Touch lt 4 for a darker screen NOTE The TIN and COL cannot be adjusted for the graphic screens source control etc The TIN cannot be adjusted for the picture of PAL Auto Dimmer DIM Touch ON or OFF to switch the function on and off BON The DIM level can be adjusted Also when the area around the monitor dark it s at the brightness level set by the DIM OFF The DIM items can t be adjusted Also even if the area around the monitor is dark it can t be changed from the brightness set by the BRT NOTE When adjusting nighttime picture quality switch this function ON Switching to the
32. riod the number entry mode will automatically be canceled 2 Touch either lt 4 or gt The track file starts playing Switching to the Next Source Mode Touch SRC to switch to the next source control Screen Switching to the Menu Screen Touch MENU to switch to the menu screen Turning the Attenuator On Off Turn down the volume quickly Touch ATT to switch the Attenuator on and off MD Player Control Function MD Player Control Screen BECI ven Direct Track Search ___ Directly input the track number that you want to M D listen to Track 122 G22 1 Touch 01 9 input the number of the track that you want to listen to If you make no further input in the 10 second period the number entry mode will automatically I 10 IEE f be canceled Touch either 144 or gt i ET CST Uu he rack starts playing Switching to the Next Source Mode Touch SRC to switch to the next source control Screen Some keys are disabled depending on the functions of Switching to the Menu Screen a unit connected Touch MEN itch to th Pausing and Restarting MD Play oe U to switehito th mshu sereen Touch gt I to make the disc pause Turning the Attenuator On Off Touch gt again to start play again Turn down the volume quickly Track Search Touch ATT to switch the Attenuator on and off Search forwards or backwards through the tracks on th
33. rking brake detection switch Connect the same wire to the ignition as the battery wire Press the reset button on the unit See page 4 For safety reasons the monitor does not open while the vehicle is moving Engaging the parking brake Make proper connections according to Connection See Installation Manual The parking brake is not engaged The unit is in a location where temperature is low The unit is set to auto dimmer The TV antenna and vehicle s radio antenna are too close For safety reasons no television video images are displayed while the vehicle is moving Engaging the parking brake will cause images to be displayed If the temperature of the monitor unit drops the screen may appear darker when power is first turned on due to the characteristics of a liquid crystal panel Wait a while after turning power on for the temperature to rise Normal brightness will return When the unit is set to auto dimmer it is not linked to the vehicle s light switch Separate the two antennas as far as possible Turn off the main unit The following messages are displayed when certain problems are occurring in your system Take the recommended actions EJECT NO DISC ERROR 04 ERROR 99 HOLD Headunit Adjusting No disc magazine has been loaded in the changer The disc magazine is not completely loaded Load the disc magazine properly No CD in the unit Insert the CD
34. rollable distance becomes short replace both of the batteries with new ones IMPOR TANT INFORMATION he center units that can be operated on the touch panel of this unit are as follows as of April 2002 KDC 9020R KDC MPV7020 KDC 6020 KDC Z939 KDC Z838 KDC Z737 and KRC Z965 To connect a disc changer CD player a center unit and KCA S210A are necessary Refer to the instruction manual of KCA S210A for the connection method f there is the O N switch on a disc changer CD player to be connected set the switch to the N Monitor Control Function OPEN CLOSE Opening the Monitor 1 Set the vehicle s parking brake 2 Press the OPEN CLOSE button The monitor will open ACAUTION The gear shift lever or other parts may interfere with the monitor when it opens If so move the gear shift lever being sure to do so safely before operating the set The monitor is drawn back in automatically if it cannot be opened normally due to an obstacle NOTE The monitor cannot be opened unless the parking brake is set Closing the Monitor Press the OPEN CLOSE button The monitor will close NOTE The monitor cannot be closed unless the parking brake is set The position to which the monitor slides or angle wh
35. ss the parking brake is set Returning to the TV Control Screen Main Touch to return to the TV control screen Main TV List Screen TV 1 22 3 12ch 1S NP S 4 DISP 215 N P S d HH G S NP S 4 suu Selecting the Band List Each time you touch TV the list switches between the TV1 and TV2 Selecting the Station Touch station number or name in the list for the desired station The number of the recalled station is displayed Station Preset Memory Store the channel of the station currently being listened to You can then recall that station with a single touch of a button Hold down list number 1 6 on which you want to store the station for two seconds or more Switching to the Display Each time DISP is touched the channel No display and the name display switch Returning to the Source Control Screen Touch RTN to return to the source control screen Shift Name Set Screen EEBSNAME PRESET 8 8 Al BI C D El A BI 1 A a bil M NI REIS Pci 1 200 S TI U View xI Ir A a mmm UL vw Ia TAE TEE TIE SITs Name Set 1 If the cursor is in the desired character input position go on to step 4 If not touch either lt or gt to move the cursor to the desired position Touching 4 moves the cursor to the left and touching moves it to the right 2 Touch wlor A to switch the character
36. t the lower left is touched the adjustment is completed and the system setup menu screen reappears NOTE f CANCEL is touched without touching the button at the upper right the adjustment is canceled and the screen that was set before switching to the System setup menu reappears elf CANCEL is touched after touching the button at the upper right the button at the upper right reappears elf RESET is touched the settings are reset to the factory defaults and the setup menu screen reappears TV Control Function TV Control Screen Main SR CI IE TV1 P 1 12ch SNPS H 12 200 MANU NEWS RDS BIL DI UD 1 FX IT Vill df gt I Selecting the TV Preset Bands Touch TV to select the TV preset band Each time you touch TV the preset band switches between the TV1 and TV2 Selecting the Video Input Touch VD to select the video input Selecting the Channels Auto Seek Tuning AUTO1 Touch gt gt to seek for channels up Touch to seek for channels down Preset station Seek Tuning AUTO2 Touch to move to the next preset station i e the one with the next highest number Touch 19 to move to the last preset station i e the one with the next lowest number Manual Tuning MANU Touch amp 1 to increase the channel by one step Touch to decrease the channel by one step Station Preset Memory Store the chann
37. the clock adjustment screen Page 11 When the Center unit is connected this function is not displayed Switching to the Touch Panel Adjustment Screen Touch TOUCH to switch to the panel adjustment screen Page 12 Canceling the Setup Menu Screen Touch RTN to switch to the menu screen AV Setting Screen NAV E LI RGB L AVIN FOE AV IN AV OUT Bae EV DL VD2 MODE E T EASTER NV T ORIS Setting the Navigation Input NAV Touch RGB AVIN or OFF to switch the Navigation input setting between the Video and the Navigation modes according to a navigation connected mOFF Set the video mode BAVIN Set the navigation mode BRGB Set the navigation mode f a navigation unit is connected to AV IN be sure to set it to AVIN f a navigation unit is connected to NAVI interface terminal s be sure to set it to RGB Setting the AV Output AV OUT Touch NORM TV or VD to switch the AV OUT terminal s output setting between normal TV and video mode BNORM Same picture sound as the picture on the monitor B TV Picture sound from television mVD Picture sound from AV IN terminal Setting the Video 2 Input VD2 MODE Touch AUTO VD or OFF to switch the VIDEO 2 IN terminal s input setting between auto video and off mode mAUTO It becomes the Back View Camera mode setting When the video signal input to th
38. v 2 TV1 P 1 1 SNP S H ch 12 00 MANU NEWS RDS Tl Bula ID I ULT JE ee T 1 Ea Auto Memory Entry You can automatically store all the receivable channels in the band currently being listened to and then recall them with the touch of a button later This function is especially useful when you are travelling and do not know what stations are available Up to 6 stations can be stored this way 1 Select the band for auto memory entry 2 Touch AME 444 and blink Touch 1 or gt gt to start auto memory entry The preset station numbers 1 6 are shown in order When all the stations on a certain band have been stored in the preset memory the auto memory entry stops The tuner then plays the last station received Selecting the Tuning Mode You can choose from three tuning modes auto seek preset station seek and manual The AUTO1 indicator is displayed when auto seek tuning is selected and the AUTO2 indicator is displayed when preset station seek tuning is selected Each time you touch SEEK the mode switches as follows 1 Auto Seek Tuning AUTO 2 Preset Station Seek Tuning v MANU Manual Tuning Switching to the TV List Screen Touch LIST to switch to the TV list screen Switching to the Name Set Screen Touch NAME to switch to the name set screen Page 15 NOTE You cannot operate unle
Download Pdf Manuals
Related Search