Kenwood KVX-5 Computer Monitor User Manual
Contents
1. EX Set Mode Setting switch to MON position while operating this LCD monitor Refer to the instruction manual for the operation of the navigation system Display the setup screen for 5 seconds as follows e Screen mode e Video source e Audio source e Volume ZOOM JUST 1 Mode Setting switch Selects the target device to control MON Monitor control mode NAVI Navigation system control mode AUD Kenwood car audio system control mode 2 Volume Control button 3 Power button 4 Cursor button Selects the item when the menu screen is displayed 5 Enter button Performs selected item when the menu screen is displayed 6 Menu Display button Displays the menu screen page 4 7 Video Source Select button Each time the button is pressed the monitor s picture switches as the navigation picture or the video picture set to AV IN CINEMA NORMAL English 3 Setup Menu 1 Press button Menu screen is displayed and the monitor enters to menu mode Press Q or button to select the adjusting item N MENU 3 and press button SCREEN CONTROL SCREEN CONTROL SETUP Adjust the picture quality brightness contrast etc RETURN SETUP Setup the picture input method and the beep sound Screen control 1 Press button 2 Select SCREEN CONTROL and press button MENU SCREEN2. GONTROL SETUP RETURN Press or button to select the adjusting item BRT Adjusts brightness amp SCREEN GONTROL TINT Adjusts tint Display while displaying the picture from the NTSC signal D COL Adjusts color Display while displaying the RETURN picture from the PAL signal and the NTSC signal CONT Adjusts contrast BLK Adjusts the black level DIM Adjusts the dimmer when it gets dark 4 Press or button to adjust each item 5 Select RETURN and press to end the Menu mode Also the monitor exits from Menu mode by no opeation for 10 seconds 4 English A MENU SCREEN GONTROL SETUP RETURN SETUP NAY p gt oDROB AV IN OFF AVY INppeYD GAM OFF BEEP gt boDON OFF RETURN Press Co button Select SETUP and press button Press or button to select the adjusting item NAV Setup input and switch method of the navigation picture Item Setting RGB When Kenwood navigation system is connected by the dedicated cable AV IN When connected to AV IN terminal be composite signal cable OFF It doesn t switch the navigation picture Default setting ED If you set to OFF while the audio source is set to NAV the audio source would switch to NORMAL AV IN Setup switch method of the picture input to AV IN terminal Item Setting VD Switched by the operation of the video source CAM Sw
3. when the stand is placed on the support 4 Peel off the protective strip from the double sided tape on the bottom of the stand and securely attach he stand ACAUTION e Do not attach the double sided tape more than once or touch the adhesive with your fingers as this will weaken its adhesive strength e f the temperature of the surface of the installation location is low warm it up using a heater or other means before attaching the stand Low temperature vA may weaken the adhesive strength of the tape Accessory e The supplied stand is specially intended for this product Do not use it with another monitor cessory 5 Secure the stand using the supplied tapping screw Accessory 6 After attaching the stand allow it to sit undisturbed for 24 hours Take care not to apply any force to the stand during this time 7 Insert the shoe of the monitor unit into the bracket Accessory ACAUTION nsert the shoe into the bracket Accessory as far Tighten as it goes Loosen T 8 Adjust the height horizontal and vertical angle of the monitor unit and securely tighten the installation i Sws using the supplied hexagon wrench Accessary Protective strip Accessory You can also adjust the monitor unit s forward position Installation surface by loosening the angle adjustment knobs and adjusting the angle of the monitor unit s installation stand 8 English Tro
4. KENWOOD WIDE SCREEN MONITOR LZ 651W INSTRUCTION MANUAL KENWOOD CORPORATION TT CHO1 Take the time to read through this instruction manual Familiarity with installation and operation procedures will help you obtain the best performance from your new LZ 651W For your records Record the serial number found on the back of the unit in the spaces designated on the warranty card and in the space provided below Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product Model Serial number PRINTED IN JAPAN B64 2631 00 00 E K Before Use Safety Precaution To prevent injury and or fire take the following precautions Ensure that the unit is securely installed Otherwise it may fly out of place during collisions and other jolts When extending the ignition or ground cables make sure to use automotive grade cables or other cables with an area of 0 75mm AVWWG18 or more to prevent wire deterioration and damage to the wire coating To prevent short circuits never put or leave any metallic objects e g coins or metal tools inside he unit e If the unit starts to emit smoke or strange smells turn off the power immediately and consult your Kenwood dealer e Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock The liquid crystal fluid may be dangerous to your health or even fatal f the liquid crystal flu
5. ccur NOTE f you experience problems during installation consult your Kenwood dealer Q If the remote control should become unresponsive replace with new batteries i e 2 x R03 Make sure that the batteries are inserted in the correct direction and do not use old batteries together with new ones The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used Therefore what appears on the display in the illustrations may differ from what appears on the display on the actual equipment and some of the illustrations on the display may represent something impossible in actual operation 2 English LZ 651W Basic Operation Audio Source Select button Each time the button is pressed the audio source switches as follows M Vv NORMAL Sound of monitoring picture v selected by Video Source Select button NAV Sound of navigation system v AV IN Sound of input video picture from AV IN YA OFF No sound u A When the voice guidance event for the navigation system takes place the audio source switches temporarily to the sound used by the navigation system even with the sound through the AV IN being output f KENWOOD N 9 Screen Mode Select button A Each time the button is pressed the screen mode switches as follows
6. essly approved in the instruction manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with the instructions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help NOTE This Class B digital apparatus complies with Canadian ICES 003 10 English
7. id from the LCD contacts your body or clothing wash it off with soap immediately This video unit is set for rear passenger use only Use of this video unit in any front seat and or where it may be visible to the driver may be illegal in some states and may cause driver distraction and accident which could injure or kill you ACAUTION To prevent damage to the machine take the following precautions e Make sure to ground the unit to a negative 12V DC power supply e Do not open the covers of the unit e Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing e Do not subject the monitor unit to excessive shock as it is a piece of precision equipment e When replacing a fuse only use a new one with the prescribed rating Using a fuse with the wrong rating may cause your unit to malfunction e To prevent short circuits when replacing a fuse first disconnect the wiring harness e Do not use any screws except for the ones provided The use of improper screws might result in damage to the main unit e You cannot view video pictures whilst the vehicle is moving To enjoy video pictures find a safe place to park and engage the parking brake e Keep acellular phone or other things that oscillate high frequency away from this unit If not the picture of the monitor may be distorted or noises may o
8. itched automatically when video signal is input to AV IN terminal OFF It doesn t switch the picture input to AV IN terminal Default setting E You cannot set AV IN when NAV is set to AV IN If you set to OFF while the audio source is set to AV IN the audio source would switch to NORMAL BEEP Setup the beep sound ON OFF Hem _ Setting ammm ON Beep is heard OFF Beep is canceled Default setting Press or button to select each item Select RETURN and press to end the Menu mode Also the monitor exits from Menu mode by no opeation for 10 seconds English 5 Installation CAA 4 x 12 mm Installation Procedure The use of any accessories except for those provided might result in damage to the unit Make sure only to use the accessories shipped with the unit as shown above To prevent short circuits remove the key from the ignition and disconnect the terminal of the battery 2 Make the proper input and output cable connections for each unit 3 Connect the wiring harness cables in the following order ground ignition 4 Connect the wiring harness connector to the unit 5 Install the unit in your car 6 Reconnect the terminal of the battery AWARNING This product is intended for use with 12V DC negative ground power only Do not connect it to any other power supply To prevent shorting disconnect the bat
9. o the Navigation System the voice of the Navigation guide will interrupt Mute cable Brown gt Connect TEL mute cable of he navigation system ACAUTION r 12V For the sake of safety be sure to connect the parking sensor gt PRK sw Parking sensor cable e Green English 7 Installation n for Monitor Unit Installation location and cleaning Select for installation a location where the stand can be placed completely horizontal or where the front edge of A he support petal shaped part can be attached horizontally as shown in Figure A Do not install in locations where the entire support is at a diagonal such as in Figure B or where the monitor unit is acing down such as in Figure C W O ACAUTION Thoroughly wipe away and dust or grease from the installation location using a cloth which has been soaked in a neutral cleaning agent and wrung out Attach the stand after allowing the installation location to dry 1 Install the shoe on the rear of the TV monitor temporarily using the supplied hexagon wrench Accessary NOTE When adjusting the fixing screw of the shoe use the hexagon wrench Accessary that came with the product Using other hexagon wrenches may damage he screw 2 Bend the stand support to conform to the shape of he installation location 3 Adjust the shape of the support so that there is no rattling or gap
10. on key If you connect the ignition wire to a power source that receives a constant voltage supply as with battery cables the battery may die If the fuse blows first make sure that the cables have not caused a short circuit then replace the old fuse with one with the same rating Do not let unconnected cables or terminals touch metal on the car or anything else conducting electricity To prevent short circuits do not remove the caps from unused terminals or from the ends of the unconnected cables After the unit is installed check whether the brake lamps blinkers wipers etc on the car are working properly Insulate unconnected cables with vinyl tape or other similar material Thoroughly wipe away oil and other dirt from the installation surface Please avoid installation on uneven surfaces Connection Monitor Unit AV input AV cable Commercially available Audio input MONO Navigation Unit Cable accompanying the Navigation System NAVI Ignition key switch ACC Fuse 2A Ignition cable Red 12V Car fuse box Main fuse d lt T Ground cable Black To car crassic Battery i B a l e Visual input Bundle cables with the clamper Accessory E gt When you connect the Mute Cable t
11. pixels 400 H x 234 V x RGB Effective pixels a KAR Nara EAE N R eked eae 99 99 Pixel arrangement RGB striped arrangement laele a1 e PAE EE ea abies AEE E A A EA ee Cold cathode tube Speaker pOWET sssssceeceeseeerne 1 W 16Q Beer 1 Color System North American Type ccccecseeceeeeeeeeeeeeeceeeceeeeeeeeeeeeseseeneesetseegeneenteteegeereees YSC European TYDC er a e eraio Te E A ARESE TEER NTSC PAL Cor atle Video input Mini jack x1 Video InputiLevel a a ela eM EEA 1Vp p 75Q 7 NUfel oyl a elbial ast l is irasi ninnota ien reedeni evera tetai 1V 22kQ RGB Input T3 Phs iEn as ENNEA Sa A EEE AERA EEE E 0 7Vp p 75Q General Operating Voltages cenn iss aaae nia e a a net kins 14 4 V DC 11 in V Consumed POWGEI be dieet eenia aerae aa na eE EE E E EAA E EEEN EAEE 1W Operational temperature range Storage temperature ranges i enasi ennea i ngera tees a aa ated mee E 20 C to sil SIZ ae Re Le ME Nl Ed a EN E Mead oh cecal dare blah BS alae 80 W x 115 H x 33 D m 7 1 16 W Ree 1 2 H x 1 5 16 D inches YAVIN TAAN EE EENE A ETENEE ERE A RAE 400g 0 88 LBS Although the effective pixels for the liquid crystal panel is given as 99 99 or more 0 01 of pixels may not light or may light incorrectly English 9 FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expr
12. tery cable from the negative terminal of the battery during installation Be sure to firmly stabilise this product Do not install it in a location which is not stable Follow the installation and wiring procedures described in this manual Improper wiring or modified installation can not only result in malfunction or damage to the unit but may also result in an accident Do not install the unit in the following locations e A location which interferes with the operation of the air bag system e A location which is not made of plastic Installing on leather wood or cloth may damage the surface e A location subject to direct sunlight subject to the air from the air conditioner or subject to moisture or high temperature This may cause deformation of the monitor unit Be sure to use the supplied screws for installation Using screws longer than those supplied may destroy parts inside the unit causing it to smoke Using screws shorter than those supplied may cause the unit to come looks from 6 English the installation bracket If you are not going to install the unit using the supplied monitor stand be sure to use a commercially available monitor stand Mounting holes for such a stand are located on the bottom of the monitor unit ACAUTION If your car s ignition does not come with an ACC position connect the ignition cables to a power source that can be turned on and off with the igniti
13. ubleshooting What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring Before calling service first check the following table for possible problems The power does not turn on e Connect the same cable to the ignition as the 1 battery cable ie The fuse has blown jeer Les e After checking for short circuits in the cables replace the fuse with one having the same i rating I I I e The unit is not connected to the Make proper connections according to parking brake detection switch Connection e The parking brake is not engaged e For safety reasons no video picture are i displayed while the vehicle is moving Engaging the parking brake will cause picture o be displayed e The unit is in a location where If the temperature of the monitor unit drops temperature is low he screen may appear darker when power is first turned on due to the characteristics of a liquid crystal panel Wait a while after turning power on for the temperature to rise Normal I brightness will return Specifications Specifications subject to change without notice Monitor Unit SEIA EEE EE E AEAEE TATE 6 45 inches diagonal WIDE 143 4 W x 79 3 H m 5 5 8 W x 3 1 8 H inches Display System sescccele E ces gaieiee ANR Transparent TN LCD panel Drive SYSLOMN a uiie rora EEEE E EERI eats Ganesha TFT active matrix system Number of pixels 80 800
Download Pdf Manuals
Related Search