Home
Kenwood KDC-MP243SW Car Stereo System User Manual
Contents
1. 0 AUX 8 8 Volume offset Sets each source s volume as a difference from the basic volume 4 Adjust the Audio setup item Turn the AUD knob 5 Exit Audio Setup mode Press the AUD knob for at least 1 second Speaker Setting Fine tuning so that the System Q value is optimal when setting the speaker type 1 Enter Standby Press the SRC button Select the STANDBY display 2 Enter Speaker Setting mode Press the AUD knob 3 Select the Speaker type Turn the AUD knob Speaker type Display OFF SP OFF For 5 amp 4 in speaker SP 5 4 For 6 amp 6x9 in speaker SP 6 9 6 For the OEM speaker SP OEM 4 Exit Speaker Setting mode Press the AUD knob Switching Display Changes displayed information on each source following In Tuner source Information Display Frequency FREQ Clock CLOCK In CD amp External disc source Information Display Disc title D TITLE Track title T TITLE Play time amp Track number P TIME Clock CLOCK 6 KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW In Audio file source Information Display Music title amp Artist name TITLE Album name amp Artist name ALBUM Folder name FOLDER File name FILE Play time amp Music number P TIME Clock CLOCK In Standby Auxiliary input source Information D
2. g Blinking Indicates that your selection is a file Cancelling the Music Search mode Press the Search button Music Search cannot be performed during Random play or scan play Music Search Function of Music CD Select the song you want to listen to by turning the AUD knob 1 Enter Music Search mode Press the Search button SEARCH is displayed Displays the current music No 2 Select the music Turn the AUD knob 3 Play the selected song Press the AUD knob The Music Search mode is canceled and the selected song is played Returning to the first song Press the kaa button for at least 1 second Cancelling the Music Search mode Press the Search button Music Search is available only during playing of the built in CD player Music Search cannot be performed during Random play or scan play English 9 Menu Operation Menu System Setting various functions 1 Enter Menu mode Press the Search button for at least 1 second MENU is displayed 2 Select the menu item Press the FM or AM button Display Setting Setting overview Source CODE SET Referto Sets Resets security code ED CODE CLR page 10 11 Function of KDC MP443 DIM ON OFF Adjusts the brightness of the display according to the surrounding illumination ICON ON1 0N2 Sets the Graphics mode of the OFF display SWPRE R SW_ Sets the pre
3. 4 Exit Menu mode Press the Search button Function of KDC MP443 Activating Security Code When Security Code is set possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off You can set the Security Code with a 4 digit number of your choice The Security Code cannot be displayed or referenced Make a note of the Security Code and treasure it up 1 Enter Standby Press the SRC button Select the STANDBY display 2 Enter Menu mode Press the Search button for at least 1 second When MENU is displayed CODE SET is also displayed 3 Enter Security Code mode Press the AUD knob for at least 1 second When ENTER is displayed CODE is also displayed 4 Select the digits to enter Press the ka a or gt gt button 5 Select the Security Code numbers Press the FM or AM button 6 Repeat steps 4 and 5 and complete the Security Code 7 Confirm the Security Code Press the AUD knob for at least 3 seconds When RE ENTER is displayed CODE is also displayed 8 Do the step 4 through 7 operation and reenter the Security Code APPROVED is displayed The Security Code function activates 10 KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW Ifyou enter the wrong Code in steps 4 through 6 repeat from step 4 9 Exit Security Code mode Press the Search button Resetting the Security Code function
4. 2 seconds Each time you press the knob at least 2 seconds the Demonstration mode alternates between the settings shown in the table below Display Setting DEMO ON The Demonstration mode function is ON DEMO OFF Exit Demonstration mode Normal mode 12 KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW Accessory of KDC MP443 KDC MP3043 KDC MP343 Basic Operations of remote control VOL SRC OAT AUD o PI lt gt gt FM AM KDC MP443 gf DIRECT KDC MP3043 3 KDC MP343 4 9 KENWOOD General control Volume control VOL Source select SRC Volume reduce ATT When the button is pressed again the volume returns to the previous level In Audio control Audio item select AUD Adjusts the Audio item VOL Refer to lt Audio Control gt page 6 for the operation method such as the procedures for Audio control and others operations In Tuner source Band select FM AM Station select lt lt gt gt 1 Recall preset stations 1 6 In Disc source Music select lt lt 4 gt gt 1 Folder Disc select FM AM Pause Play P11 About 7 KDC MP443 This button is used when Bluetooth HANDS FREE BOX is connected For more information refer to the instruction manual of Bluetooth HANDS FREE BOX About KDC MP3043 KDC MP343 Not used About DIRECT Not used A Do not set the remote control in h
5. SRC Release AM Disc slot Display 4 Auxiliary input Kenwoop ogy Search DISP AUD lt lt gt gt button knob General functions Power Source select button SRC Turns on the power When the power is on the source switches between Tuner TUNER CD CD Auxiliary input AUX and Standby STANDBY each time this button is pressed Press at least 1 second to turn off the power When an optional accessory is connected the source name for each device appears KDC MP443 only Volume control AUD knob Turn the knob to adjust the volume Faceplate release Release Releases the faceplate lock so that it can be removed Refer to the following diagram when reattaching the faceplate JO S AN The faceplate is a precision piece of equipment and can be damaged by shocks or jolts Do not place the faceplate and the faceplate case in areas exposed to direct sunlight excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing To prevent deterioration do not touch the terminals of the unit or faceplate with your fingers 1 2 3 4 5 6 Auxiliary input Connect a portable audio device with mini plug cable 3 5 Use the mini plug cable which is
6. properly press the Reset button The unit returns to factory settings when the Reset button is pressed Press the reset button if the disc auto changer fails o operate correctly Normal operation should be restored O Reset button Cleaning the Unit If the faceplate of this unit is stained wipe it with a dry soft cloth such as a silicon cloth If the faceplate is stained badly wipe the stain off with a cloth moistened with neutral cleaner then wipe it again with a clean soft dry cloth A Applying spray cleaner directly to the unit may affect its mechanical parts Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty wipe them with a clean soft dry cloth Lens Fogging When you turn on the car heater in cold weather dew or condensation may form on the lens in the CD player of the unit Called lens fogging this condensation on the lens may not allow CDs to play In such a situation remove the disc and wait for the condensation to evaporate If the unit still does not operate normally after a while consult your Kenwood dealer If you experience problems during installation consult your Kenwood dealer When you purchase optional accessories check w
7. stereo type and does not have any resistance Muting volume upon reception of phone call When there is a call CALL is displayed and the audio system is paused When the call ends CALL disappears and the audio system comes back on The audio system comes back on when SRC is pressed during a call Subwoofer output AM Switches between ON SW ON and OFF SW OFF each time the bottom side is pressed for at least 2 seconds Switching display DISP Changing the information displayed Refer to page 6 for the details of the display setting 4 KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW Tuner functions FM Band FM Switches between FM1 FM2 and FM3 each time the FMH button is pressed AM Band AM Switches to AM Switches between MW SW1 and SW2 each time the AM button is pressed KDGMP243SW only Tuning l lt lt gt gt 1 Changes the frequency During reception of stereo stations the ST indicator is ON Auto memory entry FM emorizes 6 stations with good reception automatically when pressed for at least 2 seconds Preset memory 1 6 emorize the station selected when pressing for at east 2 seconds Preset tuning 1 6 Recalls the memorized station Disc play functions Disc play Disc slot Starts playing when a disc is inserted When a CD is inserted the IN indicator is ON 3 inch 8 cm CD cannot
8. E COPY PRO systems condition TOC ERR No disc has been loaded in the disc magazine The CD is quite dirty The CD is upside down The CD is scratched a lot E 05 The disc is unreadable E 15 edia was played that doesn t have data recorded that the unit can play E 77 The unit is malfunctioning for some reason Press the reset button on the unit If the E 77 code does not disappear consult your nearest service center E 99 Something is wrong with the disc magazine Or the unit is malfunctioning for some reason Check the disc magazine And then press the reset button on the unit If the E 99 code does not disappear consult your nearest service center The unit is reading the data on the disc The CD player section is not operating properly Reinsert the CD If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted please switch off the power and consult your nearest service center The speaker wire has a short circuit or touches the chassis of the vehicle and then the protection function is activated Wire or insulate the speaker cable properly and press the reset button If the PROTECT code does not disappear consult your nearest service center An Audio file is played with a format that this unit can t support oy A copy protected file is played gt English 19 Specifications FM tuner secti
9. Hz 8 dB Middle 1 kHz 8 dB Treble 10 kHz 8 dB Preout level Load CD 2000 mV 10 kQ Preout impedance gt lt 6000 Auxiliary input Frequency response 1 dB 20 Hz 20 kHz Input Maximum Voltage 1200 mV Input Impedance 210 kQ General Operating voltage 11 16V allowable 14 4V Current consumption 10A Installation Size W x H x D 182 x 53x 155mm Weight 1 30 kg Specifications subject to change without notice 20 KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW
10. KENWOOD CD RECEIVER KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW INSTRUCTION MANUAL Kenwood Corporation Windows Contents Before use Appendix 14 Basic Operation Accessories Installation Procedure 16 General functions Tuner functions Disc play functions General Operation Audio Control Audio Setup Speaker Setting Switching Display anual Clock Adjustment Tuner Operation Frequency Step Setting Music disc Audio file Operation Direct Music Search Direct Disc Search usic Search Function of Audio file usic Search Function of Music CD Menu Operation 10 enu System Activating Security Code Deactivating Security Code Auxiliary Input Display Setting Demonstration mode Setting Basic Operations of remote control 13 Connecting Wires to Terminals 17 Installation Troubleshooting Guide 18 19 Specifications 20 2 KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW Before use AWARNING To prevent injury or fire take the following precautions To prevent a short circuit never put or leave any metallic objects such as coins or metal tools inside the unit Before using this unit for the first time This unit is initially set on the Demonstration mode When using this unit for the first time cancel the lt Demonstration mode Setting gt page 12 How to reset your unit If the unit fails to operate
11. be used Attempt to insert using an adapter can cause malfunction Refer to lt About Audio file gt page 14 for the Audio file by models you can play Pause and play 6 Switches between pause and play each time this button is pressed Disc ejection 4 You can eject the disc for 10 minutes after switching off the engine Music search lt lt 4 gt 1 Changes the music when this button is pressed Fast reverses or forwards the music while pressing Folder Disc search FM AM Switches the folder containing the audio file or the disc in the disc changer Track File Disc Folder repeat play 4 Switches between Track Repeat TRAC REP Disc Repeat DISC REP In Disc Changer and OFF REP OFF when pressed while playing a CD Switches between File Repeat FILE REP Folder Re peat FOLD REP and OFF REP OFF when pressed while playing an audio flle Scan play 2 Successively plays the intro of the music in the disc or older TRAC SCN FILE SCN is displayed during Scan Play Random play 3 Randomly plays the music in the disc or folder DISC RDM 7 FOLD RDM is displayed during Random Play Magazine random play KDC MP443 5 Randomly plays the music in the disc changer MGZN RDM is displayed during Magazine Random Play Text Title scroll DISP Scrolls the CD and audio file text display when pressing the top sid
12. e for at least 1 second English 5 General Operation Audio Control 1 Select the source to adjust Press the SRC button 2 Enter Audio Control mode Press the AUD knob 3 Select the Audio item to adjust Press the AUD knob Adjustment Item Display Range Subwoofer level SWL 15 15 Bass Boost B BOOST B B 1 1 2 1 OFF The indicator turns on according to the setting System Q NATURAL ROCK Natural Rock Pops Easy POPS EASY Top 40 Jazz Game User TOP 40 JAZZ setting GAME USER Bass level BAS L 8 8 Middle level MID L 8 8 Treble level TREL 8 8 Balance BAL Left 15 Right 15 Fader FAD Rear 15 Front 15 Exit Audio Control mode Volume control mode USER This appears when Bass level Middle level and Treble level are adjusted When USER is selected these levels are recalled 4 Adjust the Audio item Turn the AUD knob 5 Exit Audio Control mode Press any button Press a button other than the AUD knob Audio Setup Setting the Sound system 1 Select the source to adjust Press the SRC button 2 Enter Audio Setup mode Press the AUD knob for at least 1 second 3 Select the Audio Setup item to adjust Press the AUD knob Adjustment Item _ Display Range Low Pass Filter LPF 80 120 160 Through OFF Hz Volume offset OFF 8
13. ect Music Search Doing Music Search by entering the music number 1 Enter the music number Press the number buttons on the remote control 2 Do music Search Press the ka a or gt gt button Cancelling Direct Music Search Press the gt I button Function of KDC MP443 Function of disc changers with remote control Direct Disc Search Doing Disc Search by entering the disc number 1 Enter the disc number Press the number buttons on the remote control 2 Do Disc Search Press the or button Cancelling Direct Disc Search Press the gt I button Input 0 to select disc 10 Music Search Function of Audio file Search for the song you want to listen to by tracing the media file structure 1 Enter Music Search mode Press the Search button SEARCH is displayed Displays the current Audio file name 2 Searching for and playing a song Operation type Operation Movement between Turn the AUD knob or press the folders files FM AM button Selection of folder flie Press the AUD knob or P gt button Press the I lt button Press the I lt button for at least 1 second Return to previous folder Return to root folder E ON Indicates that a folder exists above the currently selected folder OFF Indicates that no folder exists above the currently selected folder E ON Indicates that a folder exists under the currently selected folder
14. ency range hat is cut off when encoding at low bit rate Supplementing is optimized by compression ormat MP3 or WMA and processed according to bit rate The effect is negligible with music that is encoded at high bit rate variable bit rate or has minimal high requency range CD READ Sets the method for reading CD When unable to play special format CD set this unction to 2 to force playing Note that some music CD may be unplayable even when set to 2 n addition audio files cannot be played when set o 2 Normally keep this set to 1 1 Automatically distinguishes between audio file disc and music CD when playing disc 2 Forces playing as music CD AUX When this is se to ON AUX source can be selected ON1 Outputs the sound of external unit connected to the AUX ter source ON2 Activates switched Turn off the at listening to ou prevents the n minal when switched to AUX he attenuator function when o AUX source enuator function when put from external unit This oise when no external unit is connected to AUX terminal OFF Disables the se ection of AUX source Set to OFF when not using the AUX terminal Select a tuning mod AUTO1 AUTO2 MANUAL Tuning mode select e of the radio Tuning mode Display Operation Auto seek AUTO1 Automatic search for a station Preset station seek AUTO2 Search in order of the stations in the Preset me
15. er similar material To prevent a short circuit do not remove the caps on the ends of the unconnected wires or the terminals Connect the speaker wires correctly to the terminals to which they correspond The unit may be damaged or fail to work if you share the wires or ground them to any metal part in the car When only two speakers are being connected to the system connect the connectors either to both the front output terminals or to both the rear output terminals do not mix front and rear For example if you connect the connector of the left speaker to a front output terminal do not connect the connector to a rear output terminal After the unit is installed check whether the brake lamps blinkers wipers etc on the car are working properly Mount the unit so that the mounting angle is 30 or less oO About CD players disc changers connected to this unit If the CD player disc changer has the O N switch set it to the N position The functions you can use and the information that can be displayed may differ depending on the models being connected 16 KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW Fuse 10A H To Kenwood disc changer External optional accessory KDC MP443 only Connecting Wires to Terminals FRONT F Front preout KDC MP443 only FM AM antenna input Rear preout Subwoo
16. fer preout Wiring harness Accessory If no connections are made do not let the wire come out from the tab Power control Motor antenna control wire Blue White TEL mute wire Brown Motor antenna control wire Blue White Black White Gray Black Gra Green Black Green Purple Black Purple Ignition wire Red Battery wire Yellow O O 00 V Connect either to the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle P CONT Connect to the terminal that is grounded when either the telephone rings or during conversation i MUTE To connect the Kenwood navigation system consult your navigation manual PEA ETEA EIA MAEA Depending on what antenna you are using connect either to the control terminal of the motor antenna or to the power terminal for the booster amplifier of the film or short pole type antenna ANT CONT To front left speaker To front right speaker To rear left speaker To rear right speaker Ignition key switch Car fuse box Ground wire Black To car chassis Main fuse Battery English 17 Installation non Japanese cars Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place Make sure that the unit is installed securely in place If the unit is unstable it may malfunction
17. for example the sound may skip Japanese cars 1 Refer to the section lt Removing the hard rubber rame gt and then remove the hard rubber frame 2 Align the holes in the unit two locations on each side with the vehicle mounting bracket and secure he unit with the accessory screws T Toyota cars N Nissan cars OMENS eae 8mm Lf MAX E3 8mm P MAX ES 0 5mm o5mm Accessory for Nissan car Accessory for Toyota car Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level Upper the frame and pull it forward as shown in the figure Accessory Removal tool 2 When the upper level is removed remove the lower two locations The frame can be removed from the bottom side in the same manner Removing the Unit 1 Refer to the section lt Removing the hard rubber frame gt and then remove the hard rubber frame 2 Insert the two removal tools deeply into the slots on each side as shown 3 Lower the removal tool toward the bottom and pull out the unit halfway while pressing towards the inside Accessory Be careful to avoid injury from the catch pins on the removal tool 4 Pull the unit all the way out with your hands being careful not to drop it 18 KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW Troubleshooting Guide Some functions of this unit may be disabled by some settings made on th
18. is unit 1 Cannot display the user of System Q P lt Audio Control gt page 6 is not set a Cannot set up the subwoofer No output from the subwoofer Cannot set up the low pass filter P Preout is not set to subwoofer 1 SWPRE of lt Menu System gt page 10 lt Subwoofer Output gt page 4 is not set to On 1 Cannot register a security code Cannot set up Display P lt Demonstration mode Setting gt page 12 is not turned off What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring Before calling service first check the following table for possible problems Tuner source H Radio reception is poor WY The car antenna is not extended ts Pull the antenna out all the way Disc source H The specified disc does not play but another one plays instead Y The specified CD is quite dirty ts Clean the CD referring to the CD cleaning of the W The disc is loaded in a different slot from that specified te Eject the disc magazine and check the number W The disc is severely scratched ts Try another disc instead Audio file source H The sound skips when an Audio file is being played W The media is scratched or dirty te Clean the media referring to the CD cleaning of YW The recording condition is bad ts Record the media again or use another media The messages shown below display your READING IN Blink PROTECT NA FIL
19. isplay Source name SRC NAME Clock CLOCK When you select the clock display the display setting of each source will be changed to the clock display Album name cannot be displayed in WMA file If the selected display item does not have any information alternative information is displayed Manual Clock Adjustment 1 Select the Clock display Press the DISP button 2 Enter Clock Adjust mode Press the DISP button for at least 1 second The clock display blinks 3 Adjust the hours Press the FM or AM button Adjust the minutes Press the ka a or gt gt button 4 Exit Clock adjustment mode Press the DISP button English 7 Tuner Operation Frequency Step Setting Changing the tuning frequency step The original setting is FM band 50 kHz and AM band 9 kHz 1 Turn the power OFF Press the SRC button for at least 1 second 2 Switch the frequency step While pressing the 1 and 5 buttons press the SRC button Release your fingers from the button after the display appears The frequency step changes to FM band 200 kHz and AM band 10 kHz When the same operation is repeated the frequency step returns to the original setting When the frequency step is changed the frequencies in the memory are deleted 8 KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW Music disc Audio file Operation Function of KDC MP443 KDC MP3043 KDC MP343 Function of remote control Dir
20. ith your Kenwood dealer to make sure that they work with your model and in your area The characters which can be displayed by this unit are A Z 0 9 amp lt gt 0 4 G3 The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used Therefore what appears on the display in the ustrations may differ from what appears on the isplay on the actual equipment and some of the ustrations on the display may be inapplicable a Handling CDs Do not touch the recording surface of the CD Do not stick tape etc on the CD or use a CD with tape stuck on it Do not use disc type accessories Clean from the center of the disc and move outward When removing CDs from this unit pull them out horizontally If the CD center hole or outside rim has burrs use the CD only after removing the burrs with a ballpoint pen etc CDs that cannot be used CDs that are not round cannot be used CDs with coloring on the recording surface or CDs that are dirty cannot be used This unit can only play the CDs with gigg di This unit may not correctly play discs which do not have the mark You cannot play a CD R or CD RW that has not been finalized For the finalization process refer to your CD R CD RW writing software and your CD R CD RW recorder instruction manual English 3 Basic Operation FM
21. lecting the display when changing to Auxiliary input source 1 Select Auxiliary input source Press the SRC button Select the AUX display 2 Enter Menu mode Press the Search button for at least 1 second MENU is displayed 3 Select Auxiliary input display setting mode Press the FM or AM button Select the NAME SET display 4 Enter Auxiliary input display setting mode Press the AUD knob for at least 1 second The presently selected Auxiliary input display is displayed 5 Select the Auxiliary input display Press the ka a or gt gt button Each time you push the knob the display alternates as listed below AUX DVD PORTABLE GAME VIDEO TV 6 Exit Auxiliary input display setting mode Press the Search button When operation stops for 10 seconds the name at that time is registered and the Auxiliary input display setting mode closes The Auxiliary input display can be set only when the built in auxiliary input or the auxiliary input of optional KCA S220A is used On the KCA S220A AUX EXT is displayed by default English 11 Menu Operation Demonstration mode Setting Sets the demonstration mode 1 Enter Menu mode Press the Search button for at least 1 second MENU is displayed 2 Select the Demonstration mode Press the FM or AM button Select the DEMO display 3 Set the Demonstration mode Press the AUD knob for at least
22. mory Manual MANUAL Normal manual tuning control LOS When this function i turning automatical good reception It is especially usefu band or SW2 band s turned on the auto seek y searches for station with searching station with SW1 normal playback condition ON1 Turns on ON2 Displays an animation OFF Turns off The marking of products using lasers Except for some areas CLASS 1 LASER PRODUCT The label is attached to the chassis case and says that the component uses laser beams that have been classified as Class 1 This means that the unit is utilizing laser beams that are of a weaker class There is no danger of hazardous radiation outside the unit English 15 Accessories Installation Procedure Accessories pe 2 ee 4 a A Installation Procedure 1 To prevent a short circuit remove the key from the ignition and disconnect the battery 2 Make the proper input and output wire connections for each unit Connect the speaker wires of the wiring harness Connect the wiring harness wires in the following order ground battery ignition Connect the wiring harness connector to the unit Install the unit in your car Reconnect the battery Press the reset button AWARNING If you connect the ignition wire red and the battery wire yellow to the car chassis ground you may cause a short circuit that i
23. n turn may start a fire Always connect those wires to the power source running through the fuse box A Mounting and wiring this product requires skills and A w ONAN experience For safety s sake leave the mounting and wiring work to professionals Make sure to ground the unit to a negative 12V DC power supply Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing Do not use your own screws Use only the screws provided If you use the wrong screws you could damage the unit If the power is not turned ON PROTECT is displayed the speaker wire may have a short circuit or touched the chassis of the vehicle and the protection function may have been activated Therefore the speaker wire should be checked If your car s ignition does not have an ACC position connect the ignition wires to a power source that can be turned on and off with the ignition key If you connect the ignition wire to a power source with a constant voltage supply as with battery wires the battery may die If the console has a lid make sure to install the unit so that the faceplate will not hit the lid when closing and opening If the fuse blows first make sure the wires aren t touching to cause a short circuit then replace the old fuse with one with the same rating Insulate unconnected wires with vinyl tape or oth
24. on Frequency range 200 kHz space 87 9 MHz 107 9 MHz 50 kHz space 87 5 MHz 108 0 MHz Usable sensitivity S N 30dB 9 30 Bf 0 8 uV 75 Q Quieting Sensitivity S N 50dB 15 20 Bf 1 6 uV 75 Q Frequency response 3 dB 30 Hz 15 kHz Signal to Noise ratio MONO 70 dB Selectivity 400 kHz gt 80 dB Stereo separation 1 kHz 40 dB AM tuner section Frequency range 10 kHz space 530 kHz 1700 kHz 9 kHz space 531 kHz 1611 kHz Usable sensitivity S N 20dB 28 dBu 25 uV AM tuner section KDC MP243SW Frequency range Band1 MW 530 kHz 1700 kHz 10 kHz space 531 kHz 1611 kHz 9 kHz space Band2 SW1 2940 kHz 7735 kHz 5 kHz space Band3 SW2 9500 kHz 10135 kHz 11580 kHz 18135 kHz 5 kHz space Usable sensitivity S N 20dB 28 dBu 25 uV CD player section Laser diode GaAlAs Digital filter D A 8 Times Over Sampling D A Converter 24 Bit Spindle speed 500 200 rpm CLV Wow amp Flutter Below Measurable Limit Frequency response 1 dB 20 Hz 20 kHz Total harmonic distortion 1 kHz 0 01 Signal to Noise ratio 1 kHz 105 dB Dynamic range MP3 decode Compliant with MPEG 1 2 Audio Layer 3 WMA decode Compliant with Windows Media Audio Audio section Maximum output power 50Wx4 Full Bandwidth Power at less than 1 THD 22Wx4 Speaker Impedance Tone action Bass 100
25. ot places such as on the dashboard Loading and Replacing the battery Use two AA R6 size batteries Slide the cover while pressing downwards to remove it as illustrated Insert the batteries with the and poles aligned properly following the illustration inside the case English 13 Appendix About Audio file e Playable Audio file MP3 mp3 WMA wma e Playable disc media CD R RW ROM Playable disc file format ISO 9660 Level 1 2 Joliet Romeo Long file name Although the audio files are complied with the standards listed above the play maybe impossible depending on the types or conditions of media or device Playing order of the Audio file In the example of folder file tree shown below the files are played in the order from to 40 i C3 Folder En 2 Audio file P ae 2 3 Aia 4 An online manual about audio files is put on the site www kenwood com audiofile On this online manual detailed information and notes which are not written in this manual are provided Make sure to read through the online manual as well For operating KCA BT200 optional For operation refer to Model A 1 in the Instruction Manual of KCA BT200 and the table below The AUTOJ TI button should be replaced with SRC button for lt Answering the Waiting Call after Terminating the Current Call gt Notation used in the KCA BT200 Operation Inst
26. out output EB SPRM ON OFF Turns ON OFF the Supreme Cw function L0 S ON OFF Only stations whose receptionis QB good are searched in auto seek tuning AUTOI AUTO1 Selects the tuning mode of TUN AUTO2 AUTO2 the radio MANUAL MANUAL CRSC OFF ON Switches to Monaural to decrease AMB noise when reception is poor NAME SET Referto Sets the display when switched page 11 to AUX source scl AUTO Specifies whether the text is gt MAN scrolled automatically AUX OFF ON1 Sets whether to display AUX EB ON2 during source selection CDREAD 1 2 Sets the CD read mode EB DEMO eferto Specifies whether to enable a age12 demonstration Factory setting Function of KDC MP243SW Displayed item is depending on currently selected source The mark in Source column shows the source to which the item is displayed Can be set in other than standby state EEB Can be set in standby state GEG lt an be set while Audio file source Can be set while Tuner source GIB Can be set during FM reception CUB Can be set during AM reception Can be set while accessing AUX source _ Can be set during all sources Refer to the respective page for information on how to set the items with reference page number Refer to the lt Appendix gt page 14 for the details of the menu items 3 Set the menu item Press the ka a or gt gt button
27. ruction Manual H button AUD knob Control knob AUD knob AUTO TI button DISP button Control knob towards up or down FM or AM button Control knob towards left or right aa or gt button For operating KCA BT100 optional To control KCA BT100 operate as follows To make setting for lt Selecting the Dialing Mode gt select lt Menu System gt page 10 Pressing the AUD knob for at least 1 second after selecting the D MODE item allows you to enter the dialing method selection mode To exit from dialing method selection mode press Search button To make lt Disconnecting a Call gt lt Clearing the Disconnection Message gt and lt Rejecting an Incoming call gt press DISP button for at least 1 second Moreover some displays are different from the description of KCA BT100 Instruction Manual Displays of KCA BT100 Instruction Actual displays on this unit Manual DISCONCT HF D CON CONNECT HF CON PHN DEL DVC DEL P STATUS D STATUS BT CON Y HE CON Y BI CON N HE CON N 14 KDC MP443 KDC MP3043 KDC MP343 KDC MP243 KDC MP243SW ICON Sets the Graphics mode of the display during Menu Glossary e e SWPRE Switching Preout Switches the preout between rear output R and subwoofer output SW SPRM Supreme Technology to extrapolate and supplement with proprietary algorithm the high frequ
28. when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON 2 Do the step 4 through 7 operation and enter the Security Code APPROVED is displayed Now you can use the unit When the Security Code function is activated CODE SET changes to CODE CLR To deactivate the Security Code function see the next section lt Deactivating Security Code gt Function of KDC MP443 Deactivating Security Code To deactivate the Security Code function 1 Enter Standby Press the SRC button Select the STANDBY display 2 Enter Menu mode Press the Search button for at least 1 second MENU is displayed 3 Select Security Code mode Press the FM or AM button Select the CODE CLR display 4 Enter Security Code mode Press the AUD knob for at least 1 second When ENTER is displayed CODE CLR is also displayed 5 Select the digits to enter Press the ka a or gt gt button 6 Select the Security Code numbers Press the FM or AM button 7 Repeat steps 4 and 5 and complete the Security Code 8 Press the AUD knob for at least 3 seconds CLEAR is displayed The Security Code function deactivates 9 Exit Security Code mode Press the Search button Ifa wrong security code is entered ERROR is displayed Enter a correct security code Auxiliary Input Display Setting Se
Download Pdf Manuals
Related Search
Related Contents
Installationsanleitung DSA-42 Cooler Master Seidon 120V Manuel d`utilisation Thermomètre hygromètre Modèle RH210 SPCMini USER MANUAL Web_AP245-ES-1B - Support Instrucciones de Little Dipper ダウンロード Oracle ZFS Storage ZS3-BA Copyright © All rights reserved.
Failed to retrieve file