Home

Kenwood DNX9990HD GPS Receiver User Manual

1. STANDBY VIRTUAL SURROUND indicator indicator Display SAMPLING indicators 192kHzfs 96kHzfs rookie 96kHzts s zj e R os oR oR om ONO a ss cas ET eh BF cs a oS 5 n S Ej Es z a Remote sensor DVD indicator Disc tray 6 8 Ea POWER button 20 fq DISC 1 5 buttons indicators 22 EJ PHONES LEVEL knob 28 OPEN CLOSE button 27 EJ PHONES jack 28 EJ gt play button 21 II pause still button 23 EI DISC SKIP button 22 E stop button 22 qj PURE AUDIO MODE button indicator 27 4 gt gt skip down amp skip up buttons 22 15 A 5 om E S E CO Display 16 Chapter 2 Controls and indicators VIDEO REPEAT TEXT SEQ 1 D MIX AUDIO O EJ Operation indicators 2 D AD VIDEO D AUDIO indicators EJ CD CD R RW VCD and DVD related indicators Special playback related indicators LSA TESA TRA SESA RRR EI Disc number indicators E Character information display 21 39 41 42 SEQ 2 TOTAL Switching the Display Brightness Press the DISPLAY button on the joystick remote to switch the display brightness in the following sequence BRIGHTNESS The display is permanently in high brightness DIMMER The display is permanently displayed in low brightness AUTO OFF The display is automatically turned off with DVD or VCD The display is shown when DVD AUDIO without
2. o Before Start range Do not insert the power cq connected components u been connected Be sure to insert all conne4 is plugged incompletely noise may result Before connecting or disc be sure to unplug the po outlet Ifa connection cab while the power plug is lq equipment damage may When a DVD AUDIO disc audio signals at very hi sometimes lead to speaker sound do not set Audio F the speakers in use are nd reproduction If the joystick remote is used outside this area correct operations will not be possible fen the controllable distance of the joystick remote duces replace both batteries with new ones Do not install the player in a place where the remote control sensor is subjected to direct sunlight or the light of a fluorescent lamp base on high frequency lighting inverter system etc Otherwise the control Also be sure to check t range of the joystick remote will be reduced increasing or decreasing t Preparation of Unit Installing the batte Open the cover and ins observing the polarity ma Chapter 1 Connection of Equipment O 8 5 5 io gz z Chapter 1 Connection of Equipment Connection with a TV or Stereo System Audio connection To audio input jacks IT Geuununununnnnnnun nn iter iver irre Stereo system Audio cable provided Video connection To video input jack Video cable
3. s00066 17 When selecting a disc displaying a still picture or letting playback pause temporartily eeeenen 17 When repeating playback or switching the displayed information nern as 18 When performing special playback or inputting a number LEE uedevs co gbsncdicedrs LobtatadyestvaSon ite E EE 18 Chapter 3 Basic Operation 19 Configuration of Discs cccccssseeeeeesessseees 20 Turning Power on ccccccsscsscsscessscsceeesees 20 STANDBY mode ame A N ET E 21 Inserting discs cccccscssccccesssssscsceesessssseeees 21 On Basic Operation ccsccccsccsssccessceeseees 21 Opetaion restriction according to the disc or player status E E E E E EA EAE A E 21 Playing dises 1 sense 21 Playing discs by changing them Playing from the selected disc Playing discs by selecting the group title chapter track Tuk ea vase bag end E E 22 Skipping a track chapter or file 22 Stopping playback eessneeeesenesensennen nenne 22 Still picture display and playback pause 23 Frame by frame advance ennenennnen 23 Forward search and reverse search ss cc 23 Slow playback and reverse slow playback 23 Menu playback of DVD nennen 24 Menu playback of P B C compatible VCD 24 Skipping indexes in DVD AUDIO oseere 25 Switching still pictures of DVD AUD
4. Chapter 3 Basic Operation This operation is not available with a MP3 disc This operation is unavailable in the all random and program modes Pure Audio function It blocks the video signal to prevent interference between the video and audio signals so pure audio can be reproduced by switching the Pure Audio function On When the video signal is blocked the TV screen shows no picture during audio playback PURE AUDIO MODE Press on the player main unit to switch the Pure Audio function on off When you are operating the joystick remote set the mode switch to the Blue position then press the P AUDIO button When the Pure Audio function is activated the PURE AUDIO MODE button on the player main unit lights up Pressing the button again switches the Pure Audio function off and turns the indicator off When an operation for displaying the on screen message the display of the performed operation contents on the TV screen or OSD is performed the video signal is output temporarily With some DVD and VCD discs the menu may be displayed 27 wr a a mie ie e gr az m 2 u 9 a u om BD Switching the audio language When a VCD ora DVD containing the recording of audio in multiple languages is played the language used in the voice can be switched over The audio language can also be switched by the OSD operation 33 1 2 28 S
5. connection is not necessary 10 Connection with a TV or Stereo System Do not insert the power cord plugs of the player and the connected components until all of the components have been connected For details on the connection terminals and functions of the TV refer to its instruction manual The video output from the player should be connected directly to the TV If the video output is connected through a VCR the picture displayed on the TV may be disturbed due to the copy protect function To Connect a TV Video connection Connect the VIDEO OUTPUT jack of the player to the video input of the TV using the pro vided video cable SCART connection For Europe and U K If the TV or VCR has SCART connectors connect the TV SCART or VCR SCART connector of this unit to the TV or VCR using SCART cables The audio and video signals can be output using a single cable The signal output from the TV SCART connector can be switched between composite video S Video and RGB The VCR SCART connector always outputs composite video signals so its output signals cannot be selected When the TV is connected through a VCR using SCART connection the picture displayed on the TV may be disturbed due to the copy protect function When using only the TV and VCR which are both connected with the player using the SCART connection the signal from the VCR cannot be sent to the TV if the player is switched off In thi
6. I button 23 DISPLAY button 42 RETURN button 24 DISC 1 to 5 buttons 22 DISC SKIP button 22 P AUDIO button 27 N Hi i 1 1 P B C MENU FILE Ss ee er ee a POWER button 20 P B C PlayBack Control button 22 KENWOOD RC D0711 MENU FILE S button 24 42 KENWOOD ann RC D0711 17 Chapter 2 Controls and indicators When repeating playback or switching When performing special playback or the displayed information inputting a number Setthe mode switch to the Purple position The functions Set the mode switch to the Orange position The of some buttons change as shown below functions of some buttons change as shown below Set to the Purple position Set to the Orange position acedesssesn 7 o JIE S ce ee ee oe ea 0 wwe A 5 om E S E CO PAGE buttons 25 eee eens es SQ MODE Sequential play mode button 25 INDEX buttons 25 REPEAT button 26 S Sooo r i f 1 1 f 1 A B REPEAT button 27 ON SCREEN P MODE Play Mode button 39 40 41 RETURN oo CHECK button 40 SET UP button 45 C button 45 REPEAT _ A B REPEAT CHECK S esse ese e ALL INFO button 42 T SEARCH button 41 Numeric buttons 22 32 45 TEXT DISP button 42 AUDIO button 28 TIME DISP
7. OSD Position On Screen Message IPB Display 5 Select the OSD position by tilting the joystick up or down then press to enter the selection in memory 52 On Screen Message Setting This setting makes it possible to enable or display of on screen messages which notifies the user of various information At the factory the player has been set to On for displaying on screen messages Setting items Select to return to the previous screen On Select to display on screen messages Off Select to not to display on screen messages Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press to SET UP display the MAIN menu of SET UP MENU 3 Press to open the setup screen p P 4 In the setup menu select On Screen Message by tilting the joystick up or down and press Rating TV Aspect 0n O TV Mode TV Monitor Type DVD VIDEO Mode OSD Position On Screen Message IPB Display Chapter 6 Various Setups 5 Select On or Off by tilting the joystick up or down then press to enter the selection in memory IPB Display Setting With the MPEG2 which is one of the video display methods of DVD each picture is divided into the following three picture types before being coded in digital signal I picture in frame coding This is the standard video and can constitute a pict
8. Player Menu Language Disc Menu Language Audio Language French Subtitle Language Spanish Still Mode German FL Mode Italian NTSC PAL Japanese SCART Output Select Chinese Taiwanese Except for Europe and U K Player Menu Language Disc Menu Language Audio Language French Subtitle Language Spanish Still Mode German FL Mode Italian Black Level Setup Japanese Chinese Taiwanese 5 Select the language by tilting the joystick up or down then press to enter the selection in memory Chapter 6 Various Setups Disc Menu Language Setting This setting makes it possible to select the language used to display the menus recorded in discs If the selected language is not used in a specific disc the language specified as the priority language for the disc will be used At the factory the language used in displaying the menus of the disc has been set to English Setting items lt gt Select to return to the previous screen English Select to display menus in English French Select to display menus in French Spanish Select to display menus in Spanish German Select to display menus in German Italian Select to display menus in Italian Chinese Select to display menus in Chinese Other ______ Select to specify the language using a code No listed in the Disc Language Code Table 63 The languages displayed with this setting item a
9. Zulu Chapter 7 Other Information To Be Noted 70 Symptoms and Treatment 72 Glossary 22 Specifications _78 g O lz A mie 69 I amp I _ 7 9 5 To Be Noted Maintenance of the unit When the front panel or case becomes dirty wipe with a soft dry cloth Do not use thinner benzine alcohol etc for these agents may cause discoloration In regard to contact cleaner Do not use contact cleaners because it could cause a malfunction Be specially careful not to use contact cleaners containing oil for they may deform the plastic component Never play a cracked or warped disc During playback the disc rotates at high speed in the player Therefore to avoid danger never use a cracked or deformed disc or a disc repaired with tape or adhesive agent Please do not use discs which are not round because they may cause malfunction Disc accessories The disc accessories stabilizer protection sheet protection ring etc which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction Disc handling precautions Handling Hold the disc so that you do not touch the playing surface Sticker ca Do not attach paper or tape to either the playing side or the label side of the discs Sticky paste 70 Cleaning If there fingerpri
10. 00 0 68 44 Control Buttons Used in Setups SET UP button Press to display the SET UP MENU Set the mode switch to the Purple position before pressing this button Joystick Tilt the joystick in the 4 directions of up down left and right to move the cursor to the desired point ENTER button After moving the cursor to the desired point press the ENTER button to enter the point and display the next setup screen RETURN button Press to return to the previous setup screen Numeric buttons C button Use these buttons to in put a figure using numeric buttons or to clear an in put with the C button Set the mode switch to Or ange position before pressing any of these buttons ENTER button Joystick Mode switch be INDEX A PLAY PAGE INDEXV STOP An RETURN button 10 en C button SET UP button 1 9 Numeric buttons ge Basic Operations in Setup Screen The SET UP MENU includes the MAIN SOUND and VISUAL menus When a setup screen is displayed select the desired item according to the purpose Ifthe power is turned off while the setup screen remains displayed after setting changes the changes will be invalid Be sure to close the setup screen before turning power off 1 Set the mode switch of the joystick remote to the Purple position 2 Press to open the SET UP MENU in which MAIN is displayed SET UP MENU C Ly 4 amp EXIT gt Tilt the joys
11. 4 Usable Country or Area Antigua and Barbuda Argentina Australia Bahamas Barbados Belize Bolivia Brazil Chile Colombia Costa Rica Cuba Dominica Dominican Republic Ecuador El Salvador Fiji Grenada Guatemala Guyana Haiti Honduras Jamaica Kiribati Marshall Islands Mexico Micronesia Nauru New Zealand Nicaragua Palau Panama Papua New Guinea Paraguay Peru Saint Christopher and Nevis Saint Lucia Region codes of the DVD VIDEO discs that can be played with this player This player can play back a DVD VIDEO disc which carries the corresponding code to the region code of the player shown in the table above a marking containing the region code of the player or the ALL marking shown below Even when a DVD VIDEO disc does not carry any indication of the region code it may sometimes unable to be played on this player due to certain restrictions ALL Video Formats Chapter 1 Connection of Equipment This manual describes the standard most typical connections of the player When an associated system component is connected also refer to their instruction manuals For details on the connection of the following components see the indicated reference pages Before Start _ amp Preparation of Remote Control Unit _ amp MP3 Files That Can Be Played Back with This Equipment _9_ Connection with a TV or Stereo System _1Q Connection with an AV Amplifier 12 F S 7 fate I Q
12. 55 Sets the DTS output Digital Audio MPEG Setting 56 Sets the MPEG output Speaker Setting 36 This setting is required when the 6CH OUTPUT jacks of the player is used in system connection Audio During Search Setting 60 Switches on off the audio during search Chapter 6 Various Setups Dynamic Range Control Setting 60 Switches the dynamic range control function Audio Filter Setting amp 1 Sets the audio filters for protecting the connected speakers When VISUAL is selected in SET UP MENU Select VISUAL when you want to change the language used to display the menu screens language use in menus on the disc audio language subtitle language etc Also select VISUAL to set the still mode FL mode video format conversion system or TV SCART connector output signals For Europe and U K O5 VISUAL Disc Menu Language h Audio Language Subtitle Language English MENU Still Mode Auto EXIT FL Mode Brightness NTSC PAL a On SCART Output Select Composit Except for Europe and U K O5 VISUAL Disc Menu Language Audio Language Subtitle Language English MENU Still Mode Auto EXIT FL Mode Brightness Black Level Setup a 7 5 IRE The NTSC gt PAL and SCART Output Select settings are not displayed in certain countries and areas Player Menu Language Setting 2 Sets the language used to display the menu screens
13. Some DVDs contain the recording of multiple viewing angles This player allows the user to select desired one of the recorded angles during playback of such a DVD Audio language DVD Some DVDs contain the re cording of multiple audio languages This player al lows the user to select desired one of the recorded audio languages during playback of such a DVD Aspect ratio The ratio between the horizontal and ver tical sizes of picture displayed on a TV screen The aspect ratio of ordinary TV is 4 3 and that of widescreen TV is 16 9 Pan amp scan DVD Method of displaying a horizon tally long picture recorded in 16 9 aspect ratio on a 4 3 TV screen by trimming part of picture In general the trimming positions for pan amp scan are determined uniformly by the reproducing device However the pan amp scan of DVD allows the software producer to specify the trimming positions to be used in playback Letterbox DVD Method of displaying a horizontally long picture recorded in 16 9 aspect ratio on a 4 3 TV screen by attaching bands at the top and bottom of the screen and displaying the horizontally long pic ture at the center of screen Frame DVD VCD Each frame of a moving picture that is displayed 30 times a second with NTSC and 25 times a second with PAL These TV formats repro duce moving pictures by displaying still pictures se quentially Field DVD VCD Part of a frame obtained by divid ing the video da
14. button 26 KENWOOD RC D0711 KENWOOD RC D0711 18 Chapter 3 Basic Operation This chapter gives description on the basic operations of the control buttons on the player main unit and joystick remote This chapter is composed of the following sections Configuration of Discs 20 Turning power on 20 Inserting discs 22 On Basic Operation 21 Using Headphones 28 5 De a mie A e gr az m 2 19 Chapter 3 Basic Operation e e e Configuration of Discs Mes disc configuration Turning power on DVD AUDIO disc configuration 1 Turn the connected components on and set the in m MP3 disc put selector of the connected amplification compo nent to DVD Folder 1 Folder 2 gt e AUDIO DVD POWER we 2 Press _ onthe player The STANDBY indicator Group 1 Group 2 gt File 1 21 31 4115 6 7 File 8 9 1020 f Er j en lights indicating that the power of the player is in Track 2345 17 Track 1 aie The folder is the storage unit at the highest level in the the standby mode es disc Sometimes a single folder contains more than one 2 Index 1 2345 file or sometimes files are recorded directly in the disc in When the power of the player is in the standby mode place of being included in a folder Some discs
15. equal to or shorter than 58 Chapter 6 Various Setups Center speaker setting Speaker Setting Custom Size Large Normal oft Level 12 11 10 9 8 7 6 5 4 3 2 1 0 aB Delay Time 0 1 3 26 3 9 53 ms gt S 0 dB or oms n g 0dB i 0dB U Size Select Normal when the connected speaker is incapable of reproducing audio below 100 Hz Select Large when the connected speaker can reproduce audio below 100 Hz 5 0 dB 0 ms Use of center speaker Select Off if the center speaker is not used Level Set the volume level 0 12 dB Delay Time Set the delay time For the setting value see Delay Time Setting After completing the speaker setting select Exit to enter the setting and return to the screen in step 5 Surround speakers setting Speaker Setting Custom 2 Exit Size Normal Off Level 12 11 10 9 8 7 6 5 4 3 2 1 0 dB Delay Time 0 5 3 10 6 15 9 ms 0dB 0dB A 0 dB 0 ms 0 dB A Size Select Normal when the connected speaker is incapable of reproducing audio below 100 Hz Select Large when the connected speaker can reproduce audio below 100 Hz Use of surround speaker Select Off if the surround speaker is not used Level Set the volume level 0 12 dB Delay Time Set the delay time For the setting value see Delay
16. menu of SET UP MENU 3 Press to open the setup screen P P 4 In the setup menu select Speaker Setting Quick by tilting the joystick up or down and press 5 Place the cursor on the speaker name you want to set to Use or Do not use then press the button 6 Each press of the button turns on and off the corresponding speaker icon in the graphic room at the lower half of screen alternately When the selected kind of speaker is to be used the corresponding speaker icon should be displayed Speaker Setting Quick g a 7 To set the use of other kinds of speakers repeat step 5 for each of them 8 After completing the setting place the cursor on Exit and press Speaker Setting Custom Setting items Front speakers L R Size Large Level 0 dB Center speaker C Size Large Use of center speaker Used Level 0 dB Delay time 0 ms Surround speakers SL SR Size Large Use of surround speakers Used Level 0 dB Delay time 0 ms Subwoofer Use of subwoofer Used Level 0 dB Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the SOUND menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select Speaker Setting Custom by tilting the joystick up or down and press 5 Set each speake
17. 39 Clearing the program 0 cccceceeceeesseeceeeeeseeeeeseeeeeeeeeeereess 40 Stopping program playback cenenneenenenee 40 Checking the program Disc Random Playback scsscccsseseseseeee 40 Stopping disc random playback eene 41 All Random Playback ccccccsssssssceeereees AL Stopping all random playback eeee 41 TEXT DISC Operation cccssscsesccesceeseee AL Title search iis iiss ne sense anne 41 Switching the character information eeee 42 Displaying all character information 00 0 0 cece 42 MP3 disc Operation cccccssccssssccesssscesees AD Switching the character information eeee Searching a desired folder file by its title Switching the DVD VIDEO Mode 43 Bonus Group sccssscsccsscccsccscccccsccsscecesees AD Chapter 6 Various Setups 44 Control Buttons Used in Setups 45 Basic Operations in Setup Screen 45 MAIN Setting sssssssscssscsscesceceeceeeseeeeeses AZ RAGE 2 Settingu u dieser een 47 TV Aspect Setting oindino iriri saaa 49 TV Mode Setting sirosis roino Ee SI asi 49 TV Monitor Type Setting eenenenenenenenne DVD VIDEO Mode Setting OSD Position Setting On Screen Message Setting IPB Display S
18. 5 Select the level by tilting the joystick up or down then press to enter the selection in memory Audio Filter Setting DVD AUDIO is recorded with a maximum sampling rate of 192 kHz and theoretically capable of reproducing up to 96 kHz As a result the speakers used may be damaged if they are not compatible with high frequencies When an ordinary speaker system is connected set the Audio Filter setting to Filter 60 kHz to protect the speakers When the speaker in use are compatible with high frequencies set this setting to Filter 110 kHz For details refer to the instruction manuals provided with your speakers At the factory the player has been set to Filter 60 kHz to protect the speakers from damage Setting items gt Select to return to the previous screen Filter 60 kHz Select when the speakers in use are not suitable for reproduction of high frequencies Filter 110 kHz Select when the speakers in use are suitable for reproduction of high frequencies Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the SOUND menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select Audio Filter by tilting the joystick up or down and press Digital Audio PCM Down Conversion Dolby Digital DTS MPEG Speaker Setting Custom Speaker Se
19. DVD AUDIO Select JY or DVD VIDEO Select Ki or Ks CD VCD Select ie MP3 disc Select 4 or B 3 Select the number by tilting the joystick up or down then press to start playback BER During playback the cursor is located on the current group title chapter track folder or file number In this figure the last number can be displayed by tilting the joystick upward The number can also1 be selected by setting the mode switch of the joystick remote to the Orange position and composing the number with numeric buttons Only the title or group icon can be selected in stop mode of DVD 31 uonendo qdso z Y a e A v2 e Time display switching and time search Use the following procedure to switch the type of information shown by the time display shown in the OSD or player display Time search is also available for specifying the position to start playback by inputting the time information The time display information type can also be changed using the TIME DISP button 26 Time search is not available in stop mode during menu playback of a DVD or with a DVD VIDEO which does not provide the time display When performing this operation with a P B C compatible VCD set P B C to off 24 1 Press during playback to display the MAIN OSD er TOTAL 2 Move the cursor to Fe Time Display icon by tilting the joystick to the left or right then press 3 Selec
20. NO USER RISK OF ELECTRIC SHOCK SERVICEABLE PARTS INSIDE REFER SERVICING TO an QUALIFIED SERVICE PERSONNEL THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCT S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE SERVICING INSTRUCTIONS IN THE THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS LITERATURE ACCOMPANYING THE APPLIANCE The marking of products using lasers For countries other than U S A U S Military and Canada CLASS 1 LASER PRODUCT The marking this product has been classified as Class 1 It means that there is no danger of hazardous radiation outside the product Location Back panel CAUTION VISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM Inside this laser product a laser diode classified as Class 2 laser radiation is contained as alerted by the internal caution label shown above Do not stare into beam Location DVD laser pick up unit cover inside this product Features Compatible with DVD AUDIO one of the latest digital audio formats The DVD AUDIO reproduces 2 channel 192 kHz 24 bit sampled digital audio or 6 channel 96 kHz 24 bitsampled audio This innovative technology has made possi
21. Operation This section describes the items which can be controlled with the VISUAL OSD Some items may be uncontrollable depending on the played disc and player status m A o 1ENG latenace Progressive x l visuar BES Scan a 2 El Subtitle icon Shows the language used in subtitles Select to change the subtitle language 36 Dur ing playback of a DVD AUDIO disc containing the recording of still pictures ASV Audio Still Video the Sub title icon shows the still image display infor mation display timing image display sequence etc Ej Picture quality icon Shows the current picture qual ity Select to adjust the picture quality 36 EJ Angle icon Shows the angle number Select to change the viewing angle 37 Switching the subtitle language When a DVD contains recording of subtitles in multiple languages the desired subtitle language can be selected 1 Press during playback of DVD and select the VISUAL OSD by tilting the joystick up or down 2 Move the cursor to uEEIT Subtitle icon by tilting the joystick to the left or right then press 3 Select the desired subtitle language number by tilting the joystick up or down then press Chapter 4 OSD Operation The desired subtitle language number can be selected from up to 32 numbers No subtitle is displayed when Off is selected When the desired language is not included in the options the language is not r
22. SHI TOKYO JAPAN KENWOOD CORP CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS NO 21 CFR 1040 10 CHAPTER 1 SUBCHAPTER J ge ey os a wre ee eS J Location Back Panel FCC WARNING For the U S A This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with the instructions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an o
23. can be changed while another disc is being played DVD player with CD R and CD RW disc compatibility This DVD player can play back tracks recorded in CD R Compact Disc Recordable and CD RW Compact Disc Rewritable as well as those in music CD Only finalized discs can be played back However certain discs may still be unplayable on this player MP3 playback capabilities This player can also play back the MP3 files which are the latest formats for storage of music data However certain MP3 files may still be unplayable on this player Progressive scanning The video display format can be switched between Interlaced and Progressive scanning Accessories Joystick remote control unit 1 Batteries R6 AA 2 Gg Video cable 1 Unpacking Unpack the unit carefully and make sure that all the accessories are present If any accessories are missing or if the unit is damaged or fails to operate notify your dealer immediately If the unit was shipped to you directly notify your shipper immediately Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future Keep this manual handy for future reference Contents Caution Read the pages marked carefully to ensure safe operation Before applying power 2 Safety precautions aeesesesesesesnnenenennnnnnnnnn Features ccccssess
24. down and press Rating TV Aspect TV Mode TV Monitor Type DVD VIDEO Mode OSD Position On Screen Message IPB Display Chapter 5 Applied Operations 5 Select On or Off by tilting the joystick up or down then press to enter the selection in memory e This setting is reset to default Off when the disc is changed or the power is set to off or standby Bonus Group In addition to ordinary groups some DVD AUDIO discs provide information hidden in a special group as a user service When this group is selected the password input screen appears on the TV screen to inform the user of the presence of the bonus group in the disc The bonus group can be played by inputting the password For the registration of password consult the software producer Input a 4 digit BONUS GROUP s password Then press ENTER 1 Set the mode switch of the joystick remote to the Orange position aa 2 Input the password using to then press EPEAT MENU FILE S to start playback of the bonus group 43 gt az gz a e gr az m 2 A ime I Chapter 6 Various Setups This chapter describes the setup operations of the player according to the connected components Most of the operations described below can be performed using the provided standard remote control unit This chapter is composed of the following sections SET UP MAIN SET UP SOUND SET UP VISUAL A EAEE T E a E
25. in digitization per second The original sound can be reproduced more faithfully when the quantization bit count is larger Linear PCM Pulse Code Modulation Audio signal format without using compression In the DVD which has a very large disc capacity the linear PCM signal using high sampling rate can be recorded Packed PCM The packed PCM P PCM signal is ob tained by compressing the linear PCM signal featur ing large data amount and high sampling rate With this compression the signal before compression can be restored perfectly Bitstream DVD This is the generic name given for the flow of data based on a standard such as Dolby Digital DTS MPEG etc Dolby Digital A digital audio compression technology developed by Dolby Laboratories Inc It is compat ible with 6 channel surround audio as well as 2 chan nel stereo and capable of recording a large amount of audio data efficiently in a disc DTS Digital surround system developed by Digital The ater Systems Inc Title Title No DVD VIDEO The title is the largest unit of video or audio recorded in DVD VIDEO Usu ally a title corresponding to a movie product with video software or an album or a piece of music with music software The numbers assigned to the titles are referred to as title numbers Chapter 7 Other Information Chapter Chapter No DVD VIDEO The chapter is a partition of video or audio that is smaller than the title A title is compose
26. is not available with DVD VIDEO MP3 disc 1 Set the mode switch of the joystick remote to the Orange position 2 While the player is in stop mode press Vera P MODE repeatedly until the player enters the disc random mode DISC RANDOM MODE DISC NO Hee ee Press P MODE to ALL RANDOM MODE When the player enters the disc random mode the screen as shown in the figure appears and the RANDOM indicator in the display lights to indicate that the player is in the disc random mode 3 Select the disc by tilting the joystick to the left or right then press to start disc random playback Disc random playback can also be started by pressing the gt PLAY button Chapter 5 Applied Operations Stopping disc random playback gt 3 5 far a 2 u mie 5 a 41 el bes Y a e Y a a lt Switching the character information When a TEXT DISC is played the displayed character information can be switched over 1 Set the mode switch of the joystick remote to the Purple position 2 Each press of displays the character TEXT DISP information by scrolling then switches it Order of information in stop mode Disc Title gt Disc Artist gt Maximum track number and total time display With DVD TEXT Disc Title Disc Artist gt STOP If the button operation is stopped while information is displayed information is displ
27. of the player Disc Menu Language Setting 2 Sets the language used to display the menu screens of the disc Audio Language Setting 63 Sets the language of the disc audio Subtitle Language Setting amp 4 Sets the language of the disc subtitles Still Mode Setting 64 Reduces blur in still images FL Mode Setting amp 3 Sets the brightness of the FL display on the player front panel NTSC gt PAL Setting 6 Switches if the signal from an NTSC format disc is to be converted into PAL or not SCART Output Select Setting amp amp Switches the output signals from the TV SCART connector of the player Black Level Setup Setting 7 This function makes the adjustment of the black level Set to your preference and monitor s ability Chapter 6 Various Setups MAIN Setting Rating Setting This setting makes it possible to inhibit the playback of adult DVD videodiscs that you do not want the children to view However there are some discs which carries an X rating indication on the jacket but do not contain recording of the viewing restriction label With such discs the viewing restriction of the player is invalid and playback cannot be inhibited The default setting is Level 8 which means no restriction When you change the restriction level for the first time you will also be requested to register a password Setting items lt gt Select to return to the previo
28. played the DOLBY DIGITAL indicator on the player main unit lights up Cinema Voice function This function to be used when words are hard to be distinguished during playback of DVD recorded with Dolby Digital Surround Dolby Digital DTS or DVD Audio LPCM To use this function it is required that the disc being played provides the center channel audio e When the digital output terminal is used the Digital Audio setting should be set to PCM or Off 84 1 Press during playback of DVD then select the SOUND OSD by tilting the joystick up or down 2 Move the cursor to ma Cinema Voice icon by tilting the joystick to the left or right then press Theicon can be selected only when the played software is recorded in Dolby Digital audio with center channel 3 Select on or off by tilting the joystick up or down then press 35 uonendo qAso OSD Operation Down Mix function This function is available with a DVD containing the recording of multi channel audio This function converts the multi channel audio into 2 channel audio and outputs the converted signals 1 Press during playback of DVD then select the SOUND OSD by tilting the joystick up or down 2 Move the cursor to Down Mix icon by tilting the joystick to the left or right then press 3 Select on or off by tilting the joystick up or down then press 36 VISUAL OSD
29. player should be connected directly to the AV amplifier If the video output is connected through a VCR the picture displayed on the TV may be disturbed due to the copy protect function To Connect an AV amplifier 6 Channel audio connection When the connected AV amplifier has 6 channel audio input jacks connect the 6CH OUTPUT jacks of the player to them When an amplifier which is not compatible with 6 channel inputs is connected use the signals from the MIX LINE OUTPUT jacks of the player The multi channel surround audio will be down mixed and output i0 Audio connection Connect the MIX LINE OUTPUT jacks of the player to the audio input jacks of the AV amplifier using the provided audio cables Digital audio connection Connect the COAXIAL DIGITAL OUTPUT connector of the player to the digital audio input connector of the AV amplifier It is also possible to perform digital connection using a commercially available optical fiber cable and the OPTICAL DIGITAL OUTPUT jack Video connection Connect the VIDEO OUTPUT jack of the player to the video input jack of the AV ampli fier using the provided video cable S Video connection When the connected TV has an S Video connector connect the S VIDEO OUTPUT connector of the player to it using the provided S Video cable As S Video separates video signal into the luminance signal Y and color signal C it can provide sharper pictures than ordinary video connect
30. provided Component video connection To color difference Cr input jack F S 7 fate I Q o Video cable optional To color difference Cs input jack ao oo Audio connection To audio input jacks Video cable optional To luminance Y input jack Video cable optional Audio cable provided S Video connection To S Video input connector S Video cable provided SCART connection For U K and Europe Connect the TV SCART connector to the TV s input connector Connect the VCR SCART connector to the VCR s input connector COMPONENT aE VIDEO OUTPUT DIGITAL OUTPUT PCM BIT STREAM a In Oo N lo e OOO COAXIAL OPTICAL Y Ce CR FRONT SURROUND SUBWOOFER S VIDEO OUTPUT VIDEO Mix LINE COMPONENT VIDEO OUTPUT guyrpyr OUTPUT 6CH OUTPUT TV SCART Den Select the scanning method of the Component Video output using the COMPONENT VIDEO OUTPUT switch on the Select the video connection method rear panel according to the TV in use When S Video INTERLACE Scanning method is fixed at interlaced f le i ted th di id scanning A mi PROGRESSIVE When progressive scanning is unavailable with certain discs the scanning method is switched automatically to interlaced scanning When the scanning method is changed the scanning status will be displayed DE for a few seconds
31. ratio according to that of the connected TV TV Mode Setting 42 This setting is required when the aspect ratio of the connected TV is 4 3 TV Monitor Type Setting 50 Set this item according to the format of the connected TV or video monitor DVD VIDEO Mode Setting 51 Sets the play mode of DVD discs OSD Position Setting 81 Sets the position of the OSD On Screen Display On Screen Message Setting 52 a A 3 Y a a om gt Switches the on screen message on off IPB Display Setting 23 Switches the IPB display on off 46 When SOUND is selected in SET UP MENU SOUND is to be selected when you want to set the audio output method when system components are connected using the digital audio output connector of the player When the system is connected using the 6CH OUTPUT jacks of the player also select SOUND to set the speakers audio output during DVD or VCD search dynamic range control function and audio filters JJ SOUND Dolby Digital Bitstream DTS Bitstream MPEG Bitstream EXIT MENU Speaker Setting Custom Dynamic Range Control Wide Audio Filter Filter 60kHz Digital Audio PCM Down Conversion Setting 54 Switches on off the down sampling conversion for the digital signal output with a high sampling rate Digital Audio Dolby Digital Setting 24 Sets the Dolby Digital output Digital Audio DTS Setting
32. the SOUND menu of SET UP MENU 3 Press to open the setup screen P P 4 In the setup menu select Digital Audio MPEG by tilting the joystick up or down and press a 56 Digital Audio PCM Down Conversion Dolby Digital DTS Speaker Setting Custom Speaker Setting Quick Audio During Search Dynamic Range Control Audio Filter 5 Select the audio output by tilting the joystick up or down and press to enter the selection in memory Chapter 6 Various Setups Speaker Setting When an associated system component is connected to the 6CH OUTPUT jacks of the player this setting is required on the player At the factory the player has been set to the standard setting with which the speakers can reproduce the 6 channel signals as soon as the connections are made This setting can be changed according to each listening environment When you want to change this setting be sure to perform it in the listening area in your own listening environment For the Speaker Setting when an AV amplifier is connected digitally to the player refer to the instruction manual of the AV amplifier Speaker Setting Quick Three kinds of speakers can be set including the Center Speaker Surround Speakers and SubWoofer Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the SOUND
33. 1 El Time display icon Shows the disc time Select to perform time search or change the time display 32 El Memory Play Memory Set icon Select to register or recall memory 33 Eq Repeat icon Shows the repeat mode Select to use repeat play mode 32 Selecting the disc to be played Use the following procedure to select a new disc to be played using OSD The disc can also be selected directly by pressing the DISC SKIP button or one of the DISC 1 to 5 buttons 22 1 Press to display the MAIN OSD 2 Move the cursor to the Ea Disc icon by tilting the joystick to the left or right then press This operation is not available in the all random and program mode 3 Select the disc number by tilting the joystick up or down then press to start playback t The cursor is displayed on the currently selected disc number Selecting a group title chapter track folder or file Use the following procedure to select a new group title chapter or track to be played using OSD They can also be selected directly by pressing the numeric buttons or a Haa gt buttons 22 When performing this operation with a P B C compatible VCD set P B C to off 22 1 Press during playback to display the MAIN OSD Chapter 4 OSD Operation 2 Move the cursor to the Group Title Chapter Track Folder or File icon by tilting the joystick to the left or right then press
34. 24 Menu playback of P B C compatible VCD When a P B C PlayBack Control capable VCD is played with P B C on the menu is displayed Perform operation according to the procedure indicated by the menu For details on the operation method and control buttons refer to the manual provided with the played software Hierarchical structure of VCD menus When a P B C compatible VCD containing menus is played and an item is selected in the displayed menu a menu with more detailed items may sometimes be displayed Such a structure in which multiple menus are distributed in different levels and interconnected is referred to as the hierarchical structure In this structure the target scene can be reached by repeatedly selecting items in multiple menus Example of hierarchical structure PLAY RETURN ch l NEXT PREVIOUS Hierarchy level 1 Menu Hierarchy level 2 Submenus Hierarchy level 3 Scenes NEXT PREVIOUS To advance in the hierarchy When an item is selected in the menu using the ENTER Select button or numeric buttons you can advance to the menu at the level immediately below the current level When the selected item is a scene the scene will be played back Chapter 3 Basic Operation To return in the hierarchy You can return to the level immediately above the current level every time you press the RETURN button When there are multiple menus scenes in a hi
35. E DISP Chapter 4 OSD Operation If you commit a mistake in the numeric button input press the C button and restart the input from the beginning This operation is not available with a MP3 disc Memory playback When you register a scene you like in memory you can start playback from that scene any time you want Up to 10 scenes can be registered in memory Memory registration and deletion are not available during menu playback of DVD or with a DVD VIDEO for which time display is disabled When performing this operation with a P B C compatible VCD set P B C to off 24 This function may be unavailable with certain discs Registering a scene in memory 1 Press during playback to display the MAIN OSD 2 Move the cursor to id Memory Set icon by tilting the joystick to the left or right then press 3 Select the memory number to be used in registration by tilting the joystick up or down then press when the scene to be registered comes The memory numbers in which scenes have already been registered show the disc number title group or track number and the time Memory numbers 5 to 10 are displayed on the next display page Disc Ti Grp Trk Time The displayed time value is the accumulated count since second 0 of the first track in the same group Up to 10 scenes can be registered in memory When a number in which a scene has already been registered is selected the scene wil
36. IGITAL VIDEO CD CD R CD RW COMPACT ISE S 6 DIGITAL AUDIO DIGITAL AUDIO TEXT Unplayable Discs Never attempt to play a Photo CD on this unit Other discs which cannot be played on this unit SACD DVD ROM DVD R RAM DVD RW CD ROM VSD CDV CD G CD EG CD EXTRA etc Only the audio part can be reproduced A DVD VIDEO disc with a region code which does not match this unit or without a region code For details see Region Codes of This Player 6 When the video format of a disc differs from that of the TV in use the disc cannot be played normally For details see Video Formats 7 Icons Inscribed on DVD Discs ALL Indicates the playable region code ES Indicates the number of languages in the audio The figure in the icon shows the number max 8 languages Indicates the number of available subtitle languages The figure in the icon shows the number max 32 subtitle languages X _9 Kl Indicates the number of viewing angles which can be viewed with the angle function The figure in the icon shows the number max 9 angles 16 9 LB Indicates the number of available aspect ratios LB stands for Letter Box and PS stands for Pan amp Scan The example shown means that the 16 9 video can be converted into letterbox Region Codes of This Player DVD VIDEO disc only A region code defined for each country or area is assigned for each DVD VIDEO player so it cann
37. IO 25 Switching the sequential play mode 25 Switching the time display 26 Repeat playback sic cicaeciani dads descent cetectintenes 26 A B repeat playback 0 cceceecceceeeeeeeeeeceeceeeeeeeseeseeseeeeeaeeees 27 Pure Audio function cneneenenenensenenneneenennen 27 Switching the audio language eneneene 28 Using Headphones ssssssssseccceessssssevees 28 Chapter 4 OSD Operation 29 Basic OSD Operation ccesccesccesscessseeses BO MAIN OSD Operation ccccssssssceesssseees ZL Selecting the disc to be played eneneneee 31 Selecting a group title chapter track folder or file E O AT EEEE OE EE 31 Time display switching and time search 32 Switching the audio language eenee 35 Virtual Surround function eeeeneeenenennen 35 Cinema Voice function Down Mix function oo eee eee eeeeeseeeeseeeeseeeseeeeaeeseaeeseeees VISUAL OSD Operation cccceesssseeees 36 Switching the subtitle language ene 36 Adjusting the picture quality 36 Switching the viewing angle eeeneenen 37 Chapter 5 Applied Operations 38 Switching the Play Modes cccsssssssseees 39 Program Playback ccccccssssssccesssesssseeeees 39 Registering and playing the program
38. KENWOOD sovereign INSTRUCTION MANUAL MULT p DV 5700 7 o er 9 aaay z Before applying power A Caution Read this page carefully to ensure safe operation Units are designed for operation as follows For the United Kingdom U S A and Canada Ce rccccccccccccvccccccce AC 120 vV only Factory fitted moulded mains plug Europe and U K scscsceeseseees AC 230 V only 1 The mains plug contains a fuse For replacement use only a 13 Amp ASTA approved BS1362 fuse Other countries nn AC 110 240 V 2 The fuse cover must be refitted when replacing the fuse in the moulded plug extension lead or adapter or consult your dealer 3 Do not cut off the mains plug from this equipment If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point then obtain an appropriate safety approved If nonetheless the mains plug is cut off remove the fuse and dispose of the plug immediately to avoid a possible shock hazard by inadvertent connection to the mains supply IMPORTANT The wires in the mains lead are coloured in accordance with the following code Blue Neutral Brown Live Do not connect those leads to the earth terminal of a three pin plug Safety precautions WARNING TO PREVENT FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK CAUTION DO NOT REMOVE COVER OR BACK
39. MP3 disc playback starts with the beginning ae oes of the file having the same number as the input Press one of G55 to to select a disc number When you are operating the joystick remote set the mode switch to the Blue position and press one of Bet the DISC 1 to 5 buttons Skipping a track chapter or file The disc number indicator above one of the DISC 1 to 5 buttons on the player main unit lights up Press G or gt gt and playback starts The DISC 1 to 5 buttons are invalid in the all random and program play modes 22 Chapter 3 Basic Operation Slow playback and reverse slow playback Still picture display and playback Forward search and reverse search pause Press during playback If you are operating the joystick remote set the mode switch to the Blue position and press the H button The TV screen shows Pause or Still and the H indicator in the display lights up To restart normal playback press the gt button on the player main unit or the gt PLAY button on the joystick remote When the IPB Display is set to On the TV screen shows Still I Still P or Still B with every still picture of DVD VIDEO This operation is not available with a MP3 disc Frame by frame advance While a still picture of DVD VIDEO or VCD is dis played press If you are operating the joystick remote set the mode switch to the Blue position and press the II button The pictu
40. Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the SOUND menu of SET UP MENU 3 Press to open the setup screen 4 Inthe setup menu select Digital Audio PCM Down Conversion by tilting the joystick up or down and press Digital Audio Dolby Digital DTS MPEG Speaker Setting Custom Speaker Setting Quick Audio During Search Dynamic Range Control Audio Filter 5 Select On or Off by tilting the joystick up or down then press to enter the selection in memory Chapter 6 Various Setups Digital Audio Dolby Digital Setting When a DVD recorded in Dolby Digital is played this setting makes it possible to select the audio signal from the digital output connector of the player At the factory the player has been set to Bitstream to enable digital connection to an AV amplifier with built in Dolby Digital decoder For the nonexistent decoders set the Digital Audio setting to PCM Setting items Select to return to the previous screen Bitstream The signal is output as a bitstream Select when connecting a component containing Dolby Digital decoder PCM The signal is converted onto 48 kHz 2CH PCM signal before being output Select when connecting a component without Dolby Digital decoder Operation procedure 1 Set the mode switch of the jo
41. Player Menu Language Disc Menu Language Audio Language Dimmer Subtitle Language Auto Off Still Mode FL Mode NTSC PAL SCART Output Select Except for Europe and U K Player Menu Language Disc Menu Language Audio Language Dimmer Subtitle Language Auto Off Still Mode FL Mode Black Level Setup 5 Select the FL mode by tilting the joystick up or down then press to enter the selection in memory 65 S i a E gz a a A 3 Y a a om z gt NTSC PAL Setting For Europe and U K This setting makes it possible to play an NTSC format disc by converting signal into PAL format Select On when it is required to convert NTSC format discs into PAL signals Setting items gt Select to return to the previous screen On Selectto enable conversion from NTSC to PAL Off Select to disable conversion from NTSC to PAL Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the VISUAL menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select NTSC PAL by tilting the joystick up or down and press x Player Menu Language Disc Menu Language on Audio Language Subtitle Language Still Mode FL Mode SCART Output Select 66 5 Select On or Off by tilting the joystic
42. RN button 8 After completing the speaker setting select Exit and press to enter the setting in memory As the test tone is not output from the subwoofer its volume level should be adjusted after listening to the actual sound 59 S ay R J a A 3 Y a a om gt Audio During Search Setting During DVD or VCD search at the first speed step this setting makes it possible to select whether the reproduced audio is output or not At the factory the player has been set to On for outputting the reproduced audio during search Setting items lt gt Select to return to the previous screen On Select to output audio during search Off Select to mute audio during search Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the SOUND menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select Audio During Search by tilting the joystick up or down and press Digital Audio PCM Down Conversion on O O Dolby Digital DTS MPEG Speaker Setting Custom Speaker Setting Quick Audio During Search Dynamic Range Control Audio Filter 60 5 Select On or Off by tilting the joystick up or down then press to enter the selection in memory Chapter 6 Various Setups Dynamic Range C
43. T UP MENU 3 Press to open the setup screen 4 In the setup menu select TV Monitor Type by tilting the joystick up or down and press Chapter 6 Various Setups TV Aspect TV Mode CRT Projector TV Monitor Type LCD Projector DVD VIDEO Mode Projection TV OSD Position PDP On Screen Message IPB Display 5 Select a monitor type by tilting the joystick up or down and press to enter the selection in memory DVD VIDEO Mode Setting When playing a disc in which DVD VIDEO and DVD AUDIO are mixed this setting makes it possible to select whether the DVD VIDEO part or DVD AUDIO part is to be played To reproduce only the DVD VIDEO part set this item to On At the factory the player has been set to Off with which the DVD AUDIO part is played back Setting items 4 Select to return to the previous screen On Select to play only the DVD VIDEO partin a DVD VIDEO DVD AUDIO mixed disc Off Select to play only the DVD AUDIO part in a DVD VIDEO DVD AUDIO mixed disc Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press to SET UP display the MAIN menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select DVD VIDEO Mode by tilting the joystick up or down and press i Rating TV Aspect TV Mode TV Monitor Type DVD VIDEO Mode OSD Position On Screen Message IPB Displ
44. TA Digital Audio Player Menu Language csssccsssseesesseee gt 62 B TV Aspect neh enssieihitsrsssnnensnne 9 PCM Down Conversion esersesssesnesrerenennne BA Disc Menu Language sccssssssscessesseeee gt 82 gt YTV Mode sisisssiessccdessssecedecaacasacecssssessecosstessecce A Dolby gt BA Audio Language sssssssccesssssceccssssssseees LES gt TV Monitor Type essessssssesseecseesseocesesseceeessese gt LI MDDS nassen el Subtitle Language ssccccssssssscessssseee gt BA om t DVD VIDEO Mode uusssssessssenennnnnennnnnnnnnnenne BL MPEG nenne T 90 Still Mode sceitse en enes m BA OSD Position ccscceceecesceecceceeceeceeceeeee LOL Speaker Setting cccssscccsssssscecsssssssseeee gt BE FL M de n 2 nanieitei el On Screen Message zeesessssennessensnnnensnnnnsnnnnnne gt 22 Audio During Search cccsssscsscessesseeee gt LEO NTSC PAL For Europe and U K 8 amp IPB Display sw ccss lt ccescsseceiscessssccceseseeasecossaeseaece 2 Dynamic Range Control ssccsseseeeee gt LEN SCART Output Select For Europe and U K dio PUR EN ash tere OU ee cseanesacccceouececscocsacsceescccoccececccssetecscccsacece 004 Black Level Setup Except for Europe and U K Disc Language Code Table
45. Time Setting After completing the speaker setting select Exit to enter the setting and return to the screen in step 5 Subwoofer setting Speaker Setting Custom Lew Size Off Level 12 11 10 9 8 7 6 5 4 3 2 1 0 dB w 92 0 dB 0 ms Use of subwoofer Select Off if the subwoofer is not used Level Set the volume level After completing the speaker setting select Exit to enter the setting and return to the screen in step 5 Chapter 6 Various Setups 7 After completing the speaker settings select Test by tilting the joystick up down or to the left right and press The cursor will automatically move across the speakers in sequence from L and the test tone is output from each speaker indicated by the cursor Press again to display the speaker setting screen for the speaker being indicated by the cursor The cursor skips the subwoofer and the speakers set to Off and test tone is not output from them After adjusting the level of each speaker channel by tilting the joystick to the left or right press the ENTER button then select Exit and press the ENTER button to restart the test tone output Repeat the volume level adjustment until the volumes of all speakers are identical When the joystick is tilted in any direction during the test tone output the test tone output stops The same effect can also be obtained by pressing the RETU
46. ailable with CD MP3 or DVD AUDIO containing only still pictures and audio AOTT Audio Only Title 23 ee De a mie ie e gr az m En u 9 a u om BD Menu playback of DVD When a DVD containing the recording of the top menu or menu is played the top menu or menu is displayed These menus allow you to select the position you want to play easily based on an interactive method The following operation procedure is the basic procedure The functions vary depending on certain softwares 1 Set the mode switch of the joystick remote to the Blue position We to display the top menu P MODE 2 Press When the TOP MENU button is pressed again while the top menu is displayed during playback the played position returns to the position where the button was pressed for the first time and playback restarts from there 3 Select the scene to be played by tilting the joystick The scene may sometimes be selected using the nu meric buttons 4 Press to play the DVD from the selected title To display multiple menus sequentially repeat steps 3 and 4 above If the menus are provided in a hierarchical structure this operation allows you to move to the menus in the lower hierarchy level When the mode switch of the joystick remote is set to the Blue position and the MENU button is pressed the menu is displayed The operation is the same as that of the top menu
47. also have a es i POWER 5 The group is the largest unit composing the music in an hierarchical structure in which a folder includes sub folders press yg on the joystick remote a DVD AUDIO disc Each group is composed of multiple Note that the file numbers are not assigned on a per folder io tracks and each track is composed of multiple indices basis but they are assigned consecutively for all the files in ee er y d Jatea f Y the whole disc When the player is turned on it reads the discs in 4 the tray and lights the disc number indicators on DVD VIDEO disc configuration the display to inform the user of presence and absence of discs If there is any disc in the tray at this moment the disc will be played back VIDEO DVD automatically Mitleid mes ess NO PLAY is displayed when the loaded disc is not playable on this player Chapter 1 2 3 4 5 Chapter 1 2 The title is the largest unit composing the music and or pictures in an DVD VIDEO disc Each title is composed of multiple chapters To put the player power in the standby mode When the power is on press the POWER button on the joystick remote The STANDBY CD and VCD disc configuration indicator lights up to indicate that the player is in CD VCD the standby mode of power To turn the player off When the power is on or standby press the POWER button on the player main unit to turn i
48. ampling rate processing VIDEO CD VCD This is a CD containing moving pic ture By compressing video data to about 1 120 and audio data to about 1 6 a 12 cm disc with the same size as ordinary music CD can store moving pictures and audio for up to about 74 minutes The VCD includes the P B C incompatible discs with only the playback capability Version 1 1 and P B C compatible discs with the menu playback and spe cial playback capabilities Version 2 0 MPEG Moving Picture Expert Group DVD VCD A digital video and audio compression and decom pression system which is standardized as an interna tional standard Decoder A device for restoring standard audio signal from audio data recorded based on coding into DVD data etc This processing is referred to as decoding Downmixing Conversion of multichannel audio sig nals of DVD or DTS CD into 2 channel stereo sig nals Sampling rate Sampling refers to converting an ana log signal into digital signal by slicing the analog sig nal into fine parts at a certain time interval and digi tizing every sliced part The sampling rate is the count of slicing per second The original sound can be re produced more faithfully when the sampling rate is higher 74 Quantization bit The quantization bit count refers to the number used in digitizing the sliced parts ob tained by slicing the analog signal as described above The quantization bit count is the number of bits used
49. an Telugu Aymara Hausa Marathi Tajik Azerbaijani Hindi Malay Thai Bashkir Croatian Maltese Tigrinya Byelorussian Hungarian Burmese Turkmen Bulgarian Armenian Nauru Tagalog Bihari Interlingua Nepali Tonga Bengali Bangla Indonesian Dutch Turkish Tibetan Icelandic Nowegian Tatar Breton Italian Oriya Twi Catalan Hebrew Punjabi Ukrainian Corsican Japanese Polish Urdu Czech Yiddish Pashto Pushto Uzbek Welsh Javanese Portuguese Vietnamese Danish Geogian Quechua Volap k German Kazakh Rhaeto Romance Wolof Bhutani Greenlandic Romanian Xhosa Greek Cambodian Russian Yoruda English Kannada Sanskrit Chinese Esperanto Korean Sindhi Spanish Kashmiri Serbo Croatian Estonian Kurdish Singhalese Basque Kirghiz Slovak Persian Latin Slovenian Finnish Lingala Samoan Fiji Laothian Shona Faroese Lithuanian Somali French Latvian Lettish Albanian
50. anish German Italian Other ____ 5 Select the desired audio language by tilting the joystick up or down then press to enter the selection in memory When Other ____ is selected set the mode switch of the joystick remote to the Purple position input the desired code No using the numeric keys and press the ENTER button If you make a mistake when pressing numeric keys press the C button and restart the code No input from the beginning 63 S a ee R J a Chapter 6 Various Setups Subtitle Language Setting the joystick up or down to display the visuaL Still Mode Setting This setting makes it possible to select the language used menu of SET UP MENU This setting makes it possible to reduce blur in still to display the subtitles recorded in discs When the disc pictures automatically In addition it also allows you does not contain the recording of the selected subtitle 3 Press to open the setup screen to select the frame still or field still picture language the default subtitle language defined for the disc will be used At the factory the player has been set to Auto with 4 In the setup menu select Subtitle Language by which frame still and field still pictures are switched At the factory the language used in displaying the subtitles has been set to English tilting the joystick up or down and press automatically For Europe and U K Setting items Setting
51. assword input screen See Input of Password Input of Password When no password has been set previously In step 5 the password input screen as shown be low appears Now set the mode switch of the joy stick remote to the Orange position compose the password using the numeric buttons and press the ENTER button Rating E m Cange Level Input a 4 digit password Then press ENTER Ce m o When gt in the screen is selected and the ENTER button is pressed the display returns to the setting screen This effect can also be achieved by pressing the RETURN button or tilting the joystick toward the left 2 The password input screen changes to the confir mation screen and the input password is shown on the TV screen Rating The player is locked Please remember the password Press ENTER to continue Chapter 6 Various Setups Note the password in a memo and retain it in a safe place before pressing the ENTER button The password is required when setting the viewing re striction When a password has already been set In step 5 the password input screen as shown be low appears Now set the mode switch of the joy stick remote to the Orange position input the pass word using the numeric buttons and press the EN TER button Rating E m Cange Level Input a 4 digit password Then press ENTER L ae OD When gt in the screen is selected and the ENTER bu
52. ay 5 Select On or Off by tilting the joystick up or down then press to enter the selection in memory This setting is reset to default Off when the disc is changed or the power is set to off or standby Chapter 6 Various Setups OSD Position Setting When the connected TV is a widescreen TV the OSD On Screen Display or on screen messages may be displayed incorrectly or overflow outside the screen depending on the TV screen mode setting The OSD position switching makes it possible to display the OSD and on screen messages normally At the factory the player has been set to Normal Setting items eo Select to return to the previous screen Normal Select to display the OSD and messages on the top of the TV screen Usually select this setting Cinema Select to display the OSD and messages on the lower part ofthe TV screen Select this setting when the OSD or messages are deviated outside the TV screen Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press to SET UP display the MAIN menu of SET UP MENU 3 Press to open the setup screen 51 S a R E a A 3 Y a a om gt 4 In the setup menu select OSD Position by tilting the joystick up or down and press TV Aspect Normal gt lt TV Mode TV Monitor Type Cinema gt _ lt DVD VIDEO Mode
53. ayed Disc Repeat playback of the disc being played All Repeat playback of all discs in the tray In the program mode 233 Ee Program In the random mode 40 41 Off Repeat playback Off Off Repeat playback off Program Repeat playback of programmed contents Random Repeat playback according to the current random play mode A B repeat playback A B repeat playback allows you to play a specified section repeatedly A B repeat playback is also available by pressing the A B REPEAT button 27 A B Repeat playback may sometimes be unavailable during playback of certain DVD 1 Perform the repeat playback procedure steps 1 and 2 22 Chapter 4 OSD Operation 2 Select A by tilting the joystick up or down then press The current disc position is stored in memory as point A where the repeat playback is to be started and the cursor is moved to B The Repeat icon changes to A and the REPEAT and gt indicators in the display light up 3 When point B where you want to stop repeat playback comes press again Repeat playback of the section between points A and B starts The Repeat icon changes to A B and the REPEAT and gt indicators light in the display To cancel repeat playback select Off This operation is not available with a DVD with which the elapsed play time information is not displayed A B Repeat playback can be used only w
54. ayed again Order of information in play mode Track Title gt Track Artist gt Disc Title Group Title gt Title Artist Group Artist gt Disc Title gt Disc Artist gt O Track No being played time information If the button operation is stopped while information or is displayed information is displayed again With DVD VIDEO TEXT Chapter Title gt Chapter Artist gt Title Title gt Title Artist Disc Title Disc Artist When the disc contains a part without character information the display shows This operation is not available when the FL Mode is set to FL OFF by the DISPLAY button amp 42 Displaying all character information When a TEXT DISC is played all character information recorded in the disc can be displayed at once 1 Set the player in normal play mode 32 2 Set the mode switch of the joystick remote to the Purple position 3 Press to display the character information ALL INFO items in the order shown below Pressing the button while an information item is displayed advances to the next item Title gt Artist gt Songwriter gt Composer gt Arranger gt Message gt N ID INFO record company date of release etc gt Genre INFO gt ALL INFO END end of information display When the mode switch of the joystick remote is set to the Blue position pressing the lt 4 or PP button ski
55. ble audio reproduction in unprecedented high quality Picture information and character information DVD TEXT are also provided Versatile DVD VIDEO Functions The DVD VIDEO provides horizontal resolution of 430 lines which exceeds that of DVD or S VHS video 400 lines or laserdisc 430 lines Multi audio function With DVD discs marked with the amp icon the desired language can be played back by selecting it from up to 8 languages The number of available languages is variable depending on the discs Multi subtitle function With DVD discs marked with the icon the subtitle language can be selected from up to 32 languages The number of subtitle languages is variable depending on the discs Angle function With DVD discs marked with the icon a single object can be viewed in up to 9 angles by switching The number of available angles is variable depending on the discs Compatibility with Wide Range of Digital Surround Software The unit incorporates Dolby Digital decoder DTS decoder MPEG multi channel decoder and Packed PCM decoder so that the users can enjoy the sound of real cinemas The unit can also be connected to the user s existing TV set 6 Channel Output Terminals These output terminals can be connected to an amplifier with 6 channel input compatibility to enjoy high bit high sampling rate multi channel sound 5 Disc Carousel Disc Changer The disc tray can accommodate up to 5 discs and the disc
56. ch as the disc title the text will be scrolled on the display on this player With certain DVD and VCD discs a menu is displayed in the beginning 21 we be a mie ie e gr az m 2 Chapter 3 Basic Operation Playing discs by changing them Playing discs by selecting the group Press cS to skip a disc title chapter track 3 TE Set the mode switch of the joystick remote to the When you are operating the joystick remote set the Joy mode switch to the Blue position and press the Orange position and input the number of the group DISC SKIP button aa title chapter or track usin to and N When the DISC SKIP button is pressed while the R 8 2 tray is open in stop mode the tray simply rotates With a DVD disc when a number is input during The disc number indicator above one of the DISC playback playback of the chapter or track having 1 to 5 buttons on the player main unit lights up the same number as the input number in the same and playback starts group or title starts When a number is input in D stop mode playback the first chapter or track z The DISC SKIP button is invalid when the tray is having the same number as the input number Y closed in the all random and program modes A starts With a CD or VCD when P B C is off playback a y starts with the beginning of the track having the 5 same number as the input number Playing from the selected disc With a
57. d of multiple chapters The numbers assigned to the chapters are referred to as chapter numbers Group Group No DVD AUDIO The group is the largest unit of the contents in DVD AUDIO Usually a group corresponds to an album The numbers as signed to the groups are referred to as group num bers Track Track No DVD AUDIO VCD CD The track is a partition of audio such as a piece of music or music chapter in a disc These partitions are num bered and the numbers are referred to as track num bers While a track usually corresponds to a piece of music with DVD AUDIO or ordinary music CD the partitions of contents and track numbers are not al ways corresponding with VCD As a result while all of the playback operations including track skipping and programming of ordinary music CD are based on the track number information such operations may sometimes be unavailable with VCD AVTT Audio Video Title Part of DVD AUDIO that contains moving pictures The audio language sub title language and viewing angles in this part can be switched by the user AOTT Audio Only Title Part of DVD AUDIO that contains audio and still pictures The audio language and still pictures in this part can be switched by the user Subtitle language DVD Some DVDs contain the re cording of multiple subtitle languages This player allows the user to select desired one of the recorded subtitle languages during playback of such a DVD Angle DVD
58. e different from those used with the player Y Pb Pr or Y B Y R Y etc When the TV in use is a HDTV or Hi Vision TV connect the component video signals from the player only to the DVD compatible input jacks of the player to the audio input jacks of the TV using the provided audio cables COMPONENT VIDEO OUTPUT switch Use this switch to switch the video display format between Interlaced and Progressive scanning Be sure to unplug the power cord from the power outlet before changing the posi tion of this switch When using the Component Video Output do not set the SCART OUTPUT SELECT setting in the SET UP MENU to RGB For Europe and U K To Connect a Stereo System Audio connection Connect the MIX LINE OUTPUT jack of the player to the audio input jacks of the connected audio component such as a stereo system using the pro vided audio cables When playing a disc containing MPEG multi channel audio recording connect the stereo input to the 6CH OUTPUT L R jacks and activate the DOWN MIX function 38 SCART Output Select Setting 66 CAUTION Be sure to adhere to the following or proper ventilation will be blocked causing damage or fire hazard e Do not place any objects impairing heat radiation onto the top of the unit e Leave some space around the unit from the larg est outside dimension including projection equal to or greater than shown below Top panel 10 cm Back pane
59. ecorded in the disc The default subtitle language set by the user is selected when the power is turned on or the disc is changed If the default language is not contained in the disc the priority language defined for the disc will be played Adjusting the picture quality Use the following procedure to adjust the picture quality If the desired picture quality cannot be obtained by the following operation adjust it on the TV The setting items vary depending on the position of the COMPONENT VIDEO OUTPUT switch on the rear of the player When Interlace is set 3 When Progressive is set _32 When Interlace is set 1 Press during playback then display the VISUAL OSD by tilting the joystick up or down Progressive 2 Move the cursor to ROSCA I Picture quality adjustment icon by tilting the joystick to the left or right then press Chapter 4 OSD Operation When Progressive is set 1 Press u e 2 J e gr az m 2 z 37 Chapter 5 Applied Operations This chapter gives descriptions on the special playback operation character display of TEXT DISC CD TEXT or DVD TEXT and headphones operation This chapter is composed of the following sections Switching the Play Modes 39 Program Playback 33 Disc Random Playback 4Q All Random Playback 41 TEXT DISC Operation 4 MP3 disc Operation 42 Switching the DVD VIDEO Mode 43 Bonus Gro
60. erarchy level they can be switched over by pressing the lt lt Previous button or gt gt Next button Main control buttons used in VCD playback and examples of indications Indication on software jacket Select 5 Return 44 Previous Control button on the player ENTER button RETURN button maa button gt gt button gt gt Next The indication on the jacket is variable depending on the software Switching P B C On and Off 1 Set the mode switch of the joystick remote to the Blue position 2 When there is a VCD in the played position of the tray and the player is in stop mode press to switch P B C on or off P B C on The TV screen shows P B C On and the P B C compatible VCD is played according to P B C The P B C indicator in the display lights up P B C off The TV screen shows P B C Off and the P B C compatible VCD is played in normal playback without P B C The P B C indicator in the display turns off Skipping indexes in DVD AUDIO DVD AUDIO tracks contain the recording of indexes The following operation makes it possible to skip the currently played track index and restart playback from the next index 1 Set the mode switch of the joystick remote to the Orange position 2 Press A or EN during playback The same number of indexes as the number of times the button is pressed can be skipped Indexes in the direction correspo
61. et tice 2er aie 6 8 kg 15 Ib KENWOOD follows a policy of continuous advancements in development For this reason specifications may be changed without notice Sufficient performance may not be exhibited at extremely cold locations Where water freezes
62. et the mode switch of the joystick remote to the Purple position Press during playback to display the SOUND OSD Each further press of the button switches the displayed amp ee Audio icon e With a DVD AUDIO disc an audio language number can be selected from up to 2 numbers e With a DVD VIDEO disc an audio language number can be selected from up to 8 numbers e With VCD STEREO L R or L R can be selected The default audio language set by the user is selected when the power is turned on or the disc is changed If the default language is not contained in the disc the priority language defined for the disc will be played back The above operation is not available in stop mode It is also unavailable with ordinary music CD CD R RW s Using Headphones Connect stereo headphones with a standard stereo phone plug into the PHONES jack and adjust the volume level with the PHONES LEVEL knob The player incorporates the headphone Virtual Surround facility allowing the use of surround audio through headphones 35 e PHONES LEVEL MIN MAX Chapter 3 Basic Operation Chapter 4 OSD Operation The operations described in this chapter allows the user to perform operations and settings by referring to the OSD On Screen Display As the OSD operation uses only the specific buttons on the joystick remote the user can enjoy the f
63. etting eneenenenenennennen nenn SOUND Setting ssssssssscssceseeceeeeeeeeees DA Digital Audio PCM Down Conversion Setting DVD VIDEO disc only oaea atraia Digital Audio Dolby Digital Setting Digital Audio DTS Setting Digital Audio MPEG Setting ncenennenenen Speaker Setting eenesesenseseeenneneenenn Audio During Search Setting 60 Dynamic Range Control Setting s 60 Audio Filter Setting nenenenenenenenennenn 61 VISUAL Setting 060 Player Menu Language Setting Disc Menu Language Setting Audio Language Setting eeeenenenennn Subtitle Language Setting 64 Still Mode Setting aise neu ede leek eed 64 FLE Mode Setting ae ans 65 NTSC PAL Setting nes eii niae eaii 66 SCART Output Select Setting ceneenenn 66 Black Level Setup Setting 67 Disc Language Code Table Chapter 7 Other Information 69 To Be Noted 222222220220ensennnnnnnnnsnnssnssensnnsnnnnne 70 Symptoms and Treatment cccccccsessesees 72 Glossary cucssssssononsssssssonnnnnsssssnnnnnnsssssnnnnnnnnnnne TA Specifications ccccccssssscccccessssssceeeesscssees 76 Systems and Types of Playable Discs DVD AUDIO DVD TM AUD I O DVD VIDEO dise D
64. few seconds until the display shows NO DISC POWER 4 Turn the player power off by pressing ON O OFF Caution on condensation Condensation of dew may occur inside the unit when there is a great difference in temperature between this unit and the outside This unit may not function properly if condensation occurs In this case leave the unit for a few hours and restart the operation after the condensation has dried up Be specially cautious against condensation in the following circumsatances When this unit is carried from one place to another across a large difference in temperature when the humidity in the room where this unit is installed increases etc Chapter 7 Other Information Apparatus Claims of U S Patent Nos 4 631 603 4 577 216 4 819 098 and 4 907 093 licensed for limited viewing uses only This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifac
65. ff by tilting the joystick up or down then press to enter the selection in memory Chapter 6 Various Setups 53 S ee S E a a A 3 Y a a om gt SOUND Setting Digital Audio PCM Down Conversion Setting DVD VIDEO disc only The player can output digital signal with maximum sampling rate of 96 kHz from the digital audio output connector When a DVD disc recorded in high sampling rate PCM is played this setting makes it possible to select whether the signal is converted into 48 kHz signal or 44 1 kHz 16 bit signal At the factory the player has been set to On for AV amplifiers incompatible with high sampling rate digital signal connection If the connected AV amplifier is compatible with 96 kHz digital input change the setting to Off Setting items gt Select to return to the previous screen On Select to down convert the signal to 44 1 kHz 16 bit PCM signal Select this setting when the connected AV amplifier is incompatible with 96 kHz digital input The analog output signals are also converted accordingly Off Select to skip down conversion Select this setting when the connected AV amplifier is compatible with 96 kHz digital input However if the disc inhibits the 96 kHz digital output the signal is down converted even when this setting is selected e With DVD AUDIO discs the signal is always output after down sampling conversion 54
66. he player main unit If you are operating the joystick remote set the mode switch to the Blue position then press the DISC SKIP button OPEN CLOSE 3 Press on the player main unit to close the tray On Basic Operation Operation restriction according to the disc or player status Operations of some DVDs and VCDs are restricted by the intention of the software producers Operations may also be restricted due to the status of the player As this player plays discs in accordance with the intentions of software producers some functions may not work as intended by the user Be sure to read the manual provided with the disc to be played When an inhibition icon is displayed on the connected TV screen during operation it indicates that the player is in the operation restricted status S Inhibition icon Chapter 3 Basic Operation Playing discs Press in stop mode to start playback When you are operating the joystick remote press the PLAY or ENTER button Playback starts with the disc indicator of which is lit The TV screen shows Play and the indicator in the display lights up e The G D D AUDIO or D VIDEO indicator in the display lights up according to the type of the disc Certain CD R and CD RW discs may not be playable on this player NO PLAY is displayed in this case The CD indicator lights when a CD DA MP3 disc is loaded When the loaded disc contains text data su
67. he same number of channels as the original number of channels regardless of whether the D MIX indicator is lit or not DTS disclaimer clause DTS Digital Surround is a discrete 5 1 channel digital audio format available on CD LD and DVD software which consequently cannot be decoded and played back inside most CD LD or DVD players For this reason when DTS encoded software is played back through the analog outputs of the CD LD or DVD player excessive noise will be exhibited To avoid possible damage to the audio system proper precautions should be taken by the consumer if the analog outputs are connected directly to an amplification system To enjoy DTS Digital Surround playback an external 5 1 channel DTS Digital Surround decoder system must be connected to the digital output S P DIE AES EBU or TosLink of the CD LD or DVD player This unit is equipped with DTS Digital Surround decoder 13 ie 8 5 5 e 5 gz E 2 Chapter 2 Controls and indicators This chapter gives description on the front panel buttons display panel of the player main unit and the provided joystick remote control unit This chapter is composed of the following sections Front Panel 5 Display _1 amp Joystick Remote Control Unit 12 A 5 om E S CO 14 Chapter 2 Controls and indicators Front Panel
68. ion To Set Up of the Player Setup of Menu screen The language to be used in the menus of the player can be selected The default language set at the factory is English 62 Setup for digital audio connection If the connected AV amplifier does not contain any of Dolby Digital DTS and MPEG decoder be sure to set the Digital Audio settings after connecting the player to it Player Menu Language Setting For the nonexistent decoders set the Digital Audio set ting to PCM If the player is played without chang ing the initial Bitstream setting extremely loud noise will be produced and may damage the speak ers Digital Audio PCM Down Conversion Setting 84 Digital Audio Dolby Digital Setting 24 Digital Audio DTS Setting 55 Digital Audio MPEG Setting 56 Setup for 6 channel audio connection When the audio is connected using the 6CH OUTPUT jacks of the player set the player as follows Speaker Setting 56 Chapter 1 Connection of Equipment Audio output from DVD AUDIO When the D MIX down mix indicator is not lit the MIX LINE OUTPUT DIGITAL OUTPUT and PHONES output jacks output the front L R channel signals instead of the down mixed 2 channel signals The 6CH OUTPUT jacks output the same number of channels as the original number of channels recorded in the DVD AUDIO disc regardless of the speaker setting When the P PCM indicator is lit the 6CH OUTPUT jacks output t
69. itch of the joystick remote to the Purple position 2 While the player is in stop mode press to SET UP display the MAIN menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select TV Mode by tilting the joystick up or down and press Rating n 2 TV Aspect Pan amp Scan TV Mode TV Monitor Type DVD VIDEO Mode OSD Position On Screen Message IPB Display 5 Select a TV screen mode by tilting the joystick up or down then press to enter the selection in memory 50 TV Monitor Type Setting This setting adjusts the picture quality according to the type of the connected TV If you use a means of display other than ordinary CRT TV such as a video monitor or projector you can adjust this setting according to your taste At the factory the player has been set to Standard for using a CRT based TV Setting items Select to return to the previous screen Standard Select when connecting a CRT based TV Usually select this item CRT Projector Select when connecting a 3 tube front projector LCD Projector Select when connecting a LCD front projector Projection TV Select when connecting a projection TV PDP Select when connecting a plasma display panel Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press to SET UP display the MAIN menu of SE
70. items Player Menu Language gt Select to return to the previous screen gt Select to return to the previous screen picture quality As the field and still pictures are displayed alternately the picture may blur displayed SCART Output Select Other ____ 2 i Bi R Disc Menu Language y Auto The subtitle language 7 selected automatically Audio Language Auto Frame still and field still pictures are 5 according to the Audio language setting Subtitle Language French switched automatically Usually select this a Case in which subtitles are not displayed When Still Mode Spanish setting 2 the voi duced in the language selected FLM 5 e voices are reproduce guag ode German x a TEE f with Audio language the subtitles are not NTSC PAL Italian Frame Select to display still pictures in a higher S gt Case in which subtitles are displayed When the rdingly voices cannot be reproduced in the language Except for Europe and U K N selected with Audio language subtitles are Pinyanienalanguaae ee Field Select to display still pictures without blur displayed in the language selected with Audio Disc Mena Language As the video information is halved compared language Audio Language English to the frame pictures the picture quality English Select to display menus in English Subtitle Language French deteriorates accordingly French Select to display men
71. ithin a same title DVD Video A B Repeat playback can be used only within a same track DVD Audio This operation is not available with a MP3 disc This operation is not available in the all random and program mode SOUND OSD Operation This section describes the items which can be controlled with the SOUND OSD Some items may be uncontrollable depending on the played disc and player status O IEN amp Ina ue SJ az El Audio icon Shows the audio signal audio language and number of audio channels Select to switch the audio language 33 El Virtual Surround icon Shows the level of the Vir tual Surround effect Select to adjust the level of Vir tual Surround or switch it off 35 E Cinema voice icon Shows the on off status of Cin ema Voice Select to switch Cinema Voice on or off El Down Mix icon Shows the on off status of Down mix Select to switch Down mix on or off 36 Switching the audio language When a VCD ora DVD containing the recording of audio in multiple languages is played the language used in the voice can be switched over The audio language can also be switched directly by pressing the AUDIO button 28 1 Press during DVD playback and select the SOUND OSD by tilting the joystick up or down 1 Dolby 2 Move the cursor to er Audio icon by tilting the joystick to the left or right then press 3 Select the desired audi
72. k of programmed contents Repeat playback Off In the random mode 20 ei Repeat playback according to the current random play aut mode Repeat playback Off A B repeat playback A B repeat playback allows you to play a specified section repeatedly A B repeat playback is also available with the OSD operation 34 A B repeat playback may sometimes be unavailable during playback of certain DVD 1 Set the mode switch of the joystick remote to the Purple position i Ga 2 Press during playback to display the MAIN OSD Repeat icon is displayed and the current disc position is stored in memory as point A where the repeat playback is to be started The REPEAT and indicators in the display light up 3 When point B where you want to stop repeat playback i G A comes press again Repeat 1con 1S A B REPEAT displayed and repeat playback of the section between points A and B starts The REPEAT and O indicators light in the display To cancel repeat playback and return to normal playback press the A B REPEAT button during A B repeat playback The REPEAT and Q gt O indicators turn off and normal playback starts This operation is not available with a DVD with which the elapsed play time information is not displayed A B Repeat playback can be used only within a same title DVD Video A B Repeat playback can be used only within a same track DVD Audio
73. k up or down then press to enter the selection in memory Chapter 6 Various Setups SCART Output Select Setting For Europe and U K This setting makes it possible to select the output signals from the TV SCART connector of the player The VCR SCART connector always outputs composite video signals so its output signals cannot be selected When the RGB output signals are selected with this setting the COMPONENT VIDEO OUTPUT jacks of the player do not output any video signal At the factory the TV SCART connector output signals of the player has been set to Composite Setting items gt Select to return to the previous screen Composite Select to output composite video signal S Video Select to output S Video signals RGB Select to output RGB signals Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the VISUAL menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select SCART Output Select by tilting the joystick up or down and press Audio Language a S Video Subtitle Language a RGB Still Mode FL Mode NTSC PAL SCART Output Select 5 Select the desired output signals by tilting the joystick up or down then press to enter the selection in memory Chapter 6 Various Setups Black Level Setup Setting 5 I
74. l 10 cm 11 F S 7 fate I Q o Chapter 1 Connection of Equipment Connection with an AV Amplifier 6 channel audio connection To 6 channel audio input jacks AV amp Audio cable provided Audio connection To audio input jacks Audio cable provided Video connection To video input jack Video cable provided ats a S Video connection To S Video input connector Digital audio connection S Video cable provided Used when the AV amplifier and TV have the component video Coaxial cable provided connection capability 0 Used when the TV or VCR has the SCART connection capability 11 Used when the AV amp has 6 channel COMPONENT VIDEO OUTPUT GITAL OUTPUT CR COMPONENT VIDEO OUTPUT FRONT SURROUND SUBWOOFER 6CH OUTPUT VIDEO OUTPUT VCR SCART FA Remove the protective cap before using the DIGITAL OUTPUT OPTICAL Select the video connection method according to the TV in use When S Video cable is connected the ordinary video connection is not necessary 12 Connection with an AV Amplifier Do not insert the power cord plugs of the player and the connected components until allofthe components have been connected For details on the connection terminals and functions of the AV amplifier refer to its instruction manual The video output from the
75. l overwrite the existing memory To delete a scene from memory set the mode switch of the joystick remote to the Orange position select the memory number and press the C button The memory of the disc at the disc replacement position of the tray is cleared when the power is turned off or standby or the tray is opened This operation is not available with a MP3 disc Recalling memory 1 Press to display the MAIN OSD Memory Play icon and 2 Move the cursor to FR A press 3 Selectthe memory number ofthe scene to be recalled by tilting the joystick up or down then press Chapter 4 OSD Operation Repeat playback Desired video and audio can be played repeatedly However with some DVDs and VCDs the partitions in the recording are not related with the track number assignment As a result repeat playback may not be available with such software The same effect can also be obtained directly by pressing the REPEAT button 28 This function may be unavailable with certain discs 1 Press during playback to display the MAIN OSD 2 Move the cursor to a Repeat icon by tilting the joystick to the left or right then press 3 Select the repeat mode by tilting the joystick up or down then press Repeat playback is canceled when it is stopped except when All is selected When the repeat mode is changed the repeat icon varies according to the change When the player i
76. lay lights up The character information display also shows the repeat mode information for a few seconds When the player is in stop mode only All or OFF can be selected This operation is not available with a DVD with which the elapsed play time information is not displayed Chapter 3 Basic Operation During playback of DVD AUDIO P Repeat playback of the track being played Repeat playback of the group being played 7 E Repeat playback of the disc being played z a oO Repeat playback of all discs in the tray fra Repeat playback Off 8J B Disc is displayed only when SEQ 2 indicator is lit During playback of DVD VIDEO Chp Repeat playback of the chapter being played m Repeat playback of the title being played E fi Repeat playback of all discs in the tray gt RITE Repeat playback Off During playback of CD or VCD Repeat playback of the track being played 4 x Pa Repeat playback of the disc being played 1 E Repeat playback of all discs in the tray 2 NITE Repeat playback Off During playback of MP3 disc lt E i fa Repeat playback of the file being played ae Repeat playback of the folder being played 2 ner Repeat playback of the disc being played St Repeat playback of all discs in the tray Repeat playback Off In the program mode 33 Repeat playbac
77. le language cannot be changed The language cannot be switched when the played DVD does not contain the recording of multiple au dio or subtitle languages 36 63 64 Viewing angle cannot be changed The viewing angle cannot be switched when the played DVD does not contain the recording of multiple angles The viewing angle can neither be switched in part where no angle is recorded 37 LSS Chapter 7 Other Information The viewing restriction Rating cannot be changed If you have lost the password initialize the default setting by the user to the factory setting as described below While holding the m button on the main unit press the POWER button When the display shows INIT OK switch the power on again 70 The selected audio or subtitle languages is not played If the played DVD does not contain the default lan guage set by the user the priority language specified for the disc will be selected 63 84 The TV screen does not show any message when a button is pressed If On Screen Message is set to Off switch it On BSA The messages in the menus are not displayed in the selected language If the played DVD does not contain the recording of the default language set by the user the priority lan guage specified for the disc will be selected amp 3 Remote control with the joystick remote is impossible The batteries are exhausted The controller positi
78. menus displayed on the TV screen OSD On Screen Display OSD is a method of inter active operations using the menus and icons displayed on the TV screen On Screen Message Message displayed on the TV screen when an operation is performed Chapter 7 Other Information Downconversion Conversion of PCM signal with high sampling rate such as 96 kHz and 192 kHz into a signal with a sampling rate of 48 kHz or 44 1 kHz Dynamic range Difference between the minimum re producible audio signal and maximum reproducible audio signal 75 Q eg az mi al gt mie Specifications Format section Format kan DVD audio ver 1 2 DVD video ver 1 1 E a svicsissecadecesasstess AA N Semiconductor laser Audio section Frequency response Sampling frequency 44 1kHz CD only 4 Hzw20 kHz Sampling frequency 48 KHZ oie 4 Hz 22 kHz Sampling frequency 96 KHZ occ eee 4 Hzw44 kHz Sampling frequency 192 kHz DVD AUDIO only RT SE SE re edd 4 Hz 88 kHz Signal to noise ratio More than 120 dB Dynamictanger n nsrsisenentkenentanes More than 100 dB Total harmonic distortion Less than 0 003 1kHz Channel separation More than 95 dB 1kHz Analog output level impedance MIX EINE OUTPUT 2er ee 2 V 510 Q CCH OUTBUR ns een 2V 510Q Digital output level impedance CORTAL n aen a 0 5 Vp p 75 Q OPTICAL Wave length 660 nm 21 dBm 15 dBm Headph
79. n the setup menu select 7 5 IRE or 0 IRE by Except for Europe and U K tilting the joystick up or down and press This function makes the adjustment of the black level Set to your preference and monitor s ability Setting items Select to return to the previous screen 7 5 IRE Standard black level 0 IRE Expanded black level e As for this function only interlace output is effective Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the VISUAL menu of SET UP MENU 3 Press to open the setup screen 4 Inthe setup menu select Black Level Setup by tilting the joystick up or down and press Disc Menu Language 7 5 IRE Audio Language Subtitle Language Still Mode FL Mode Black Level Setup 67 S ee R E a a A 3 Y a a om gt Disc Language Code Table 68 Cord No Language Afar Cord No Language Frisian Cord No Language Malagasy Chapter 6 Various Setups Cord No Language Serbian Abkhazian Irish Maori Sundanese Afrikaans Scots Gaelic Macedonian Swedish Amharic Galician Malayalam Swahili Arabic Guarani Mongolian Tamil Assamese Gujarati Moldavi
80. n to display the SOUND menu of SET UP MENU 3 Press to open the setup screen P 4 In the setup menu select Digital Audio DTS by tilting the joystick up or down and press Digital Audio PCM Down Conversion Dolby Digital MPEG Speaker Setting Custom Speaker Setting Quick Audio During Search Dynamic Range Control Audio Filter 5 Select the audio output by tilting the joystick up or down and press to enter the selection in memory Chapter 6 Various Setups S A i 7 E gz a 55 a A 3 Y a a om gt Digital Audio MPEG Setting When a DVD recorded in MPEG Audio is played this setting makes it possible to select the audio signal output from the digital output connector At the factory the player has been set to Bitstream to enable digital connection to an AV amplifier with built in MPEG decoder For the nonexistent decoders set the Digital Audio setting to PCM Setting items 2 Select to return to the previous screen Bitstream The signal is output as a bitstream Select when connecting a component containing MPEG decoder PCM The signal is converted onto 48 KHz 2CH PCM signal before being output Select when connecting a component without MPEG decoder Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display
81. nding to the pressed button are skipped and the destination index is played back from the beginning The display shows the index number together with the group and track numbers Switching still pictures of DVD AUDIO When a DVD AUDIO AOTT Audio Only Title disc containing the recording of still pictures is played the still pictures can be displayed The operation may be restricted with certain discs 1 Set the mode switch of the joystick remote to the Purple position 2 To switch the still pictures press z or EN during playback Press the RETURN button to switch to the home still picture Switching the sequential play mode The player is capable of sequential playback using the 5 disc carousel disc changer Ifa DVD and or VCD is mixed in the discs to be played sequentially the sequential playback may stall in the middle while the menu remains displayed In such a case switch the sequential play mode of the player Set the sequential play mode of the player to SEQ 2 using the joystick remote as described below The DVD VIDEO playback will be skipped in order not to interrupt the sequential playback When playing a VCD with menu playback or playing a DVD VIDEO set the sequential play mode of the player to SEQ 1 1 Set the player to normal play mode 39 If the player is in the program or random play mode the sequential play mode cannot be switched Chapter 3 Basic Operation 2 Set the m
82. nt marks or foreign matter found on the disc lightly wipe the disc with a soft cotton cloth or similar from the center of the disc outwards in a radial manner LZ Storage When a disc is not to be played for a long period of time remove it from the player and store it in its case Malfunction of Microcomputer In case the microcomputer malfunctions making operations impossible or showing wrong messages on the display even if you connected everything properly When the microcomputer malfunctions perform the following procedure to reset the microcomputer and return it to the normal condition 1 While holding on the player main unit POWER press 2 The display on the main unit shows blinking INIT initializing then shows INIT OK Ini tialization OK to indicate that the microcomputer is Teset POWER 3 Press __ on the main unit to turn it off then press ON D OFF it again to turn it on The resetting clears the setups stored in the microcomputer and returns it to the factory set initial condition After resetting you should perform the various setups of the player again from the beginning Chapter 7 Other Information Transport or moving precautions When transporting or moving the player first remove the disc and observe the following procedure 1 Turn the player power on 2 If any disc is left in the player eject all of the discs left in it 3 Wait for a
83. o language number by tilting the joystick up or down then press With a DVD AUDIO disc an audio language number can be selected from up to 2 numbers With a DVD VIDEO disc an audio language number can be selected from up to 8 numbers e With VCD STEREO L R or L R can be selected The default audio language set by the user is selected when the power is turned on or the disc is changed If the default language is not contained in the disc the priority language defined for the disc will be played back Virtual Surround function When playing a DVD recorded with Dolby Digital Surround audio powerful sound can be reproduced even when you use headphones or only two speakers 1 Press during DVD playback and select the SOUND OSD by tilting the joystick up or down 2 Move the cursor to Virtual Surround icon by tilting the joystick to the left or right then press The icon can be selected only when the played software is recorded in Dolby Digital audio with 2 or more channels 3 Select the level of Virtual Surround effect by tilting the joystick up or down then press Chapter 4 OSD Operation The effect is increased when the Br selected level is higher Select Off to switch the effect Off To select the level of the Virtual Surround effect through headphones select HP1 or HP2 When a DVD recorded with Dolby Digital audio with 2 or more channels is
84. o the Blue position e The maximum number of folders or files that can be searched is 999 Folders or files exceeding this number cannot be searched TOP MENU 2 Press the WWW button P MODE e If file search is required press the button MENU FILE S instead 3 Select the desired folder or file by tilting the joystick up or down then press 4 Press the button e In folder search playback begins with the file with the minimum file number in the searched folder e In file search playback begins with the searched file Switching the DVD VIDEO Mode When playing a disc in which DVD VIDEO and DVD AUDIO are mixed this setting makes it possible to select whether the DVD VIDEO part or DVD AUDIO part is to be played To reproduce only the DVD VIDEO part set this item to On At the factory the player has been set to Off with which the DVD AUDIO part is played back Setting items Select to return to the previous screen On Select to play only the DVD VIDEO part in a DVD VIDEO DVD AUDIO mixed disc Off Select to play only the DVD AUDIO part ina DVD VIDEO DVD AUDIO mixed disc Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press to SET UP display the MAIN menu of SET UP MENU 3 Press to open the setup screen p P 4 In the setup screen select DVD VIDEO Mode by tilting the joystick up or
85. ode switch of the joystick remote to the Purple position 3 Each press of We Switches the sequential play P MODE mode of the player alternately Sequential play mode 1 SEQ 1 lit All discs can be played including DVD VIDEO discs When there is a P B C compatible VCD or a DVD on the tray sequential playback may sometimes be interrupted and the menu displayed In this case perform menu playback 24 Sequential play mode 2 SEQ 2 lit Playback of DVD VIDEO discs is skipped in order not to interrupt sequential playback The display shows SKIP DVD VIDEO to indicate this With a DVD AUDIO disc containing the recording of menu menu playback is not available With a P B C compatible VCD playback is performed by switching P B C automatically to off When the sequential play mode is changed SEQ 1 or SEQ 2 is displayed on the TV screen and the SEQ 1 or SEQ 2 indicator light in the display to indicate the current sequential play mode 25 we be a mie ie e gr az m 2 ta 9 a u om BD Switching the time display The information in the time display can be switched over The information can also be switched by the OSD operation 32 This operation is not available in stop mode during menu playback of DVD or with a DVD for which time display is disabled If P B C is set to On with a VCD set P B C to Off 24 1 Set the mode
86. on is too apart from the remote sensor the control angle is deviated or there is an obstacle between the remote and remote sensor amp The mode switch is not set to the proper position L to 48 An inhibition icon is displayed and no operation is accepted The operations of certain DVDs and VCDs are restricted by the intention of the software producers Such discs should be operated in accordance with the software Operations may also be restricted depending on the player status DVD playback cannot be stopped by pressing the STOP button With certain DVDs the inhibition icon is displayed and playback cannot be stopped even when the E button is pressed In this case press the DISC SKIP button to select another disc then press the W button to stop playback If there is only one disc in the tray open the tray place another disc close the tray press the DISC SKIP button to select the second disc then press the W button to stop playback Chapter 7 Other Information 73 Q eg e lz el gt eN mie I amp I _ 7 9 5 Glossary DVD Digital Versatile Disc DVD VIDEO is a disc featuring high video audio quality made possible by large recording capacity of video and audio signals of movie software etc and by digital signal process ing DVD AUDIO has been desired to provide even higher audio quality than DVD VIDEO by using high bit high s
87. one output 30 mW 32 Q load Phones level MAX KENWOOD 76 Video Section Video output format PAL PAL60 NTSC NTSC disc play only Composite video output level nenee 1 Vp p 75 Q S video output level Y signal 1 Vp p 752 G signal nena ees a ee 0 286 Vp p 75 Q Component video output level For Europe and U K Y signal unterste Keen 1 Vp p 75 Q EB SI HA 2 ehesten 0 7 Vp p 75 Q CRIME EE EAEE otis 0 7 Vp p 75 Q Component video output level Interlace Black Level Setup 7 5 IRE Except for Europe and U K Sr rent 1 Vp p 75 Q GB Sigtial sn 0 68 Vp p 75 Q GReSigtial ee 0 68 Vp p 75 Q RGB output level SCART 0 7 Vp p 75 Q Video signal to noise ratio oe eee ee eeetete tees eeesestseneneees 65 dB Horizontal resolution ccs eee eseseseseeeeeeseeseesenens 500 lines For your records Record the serial number found on the back of the unit in the spaces designated on the warranty card and in the space provided below Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product Model Serial Number Laser Section DVD Wayelength 2 3 erg 643 683 nm Laser power dass 2 a A aaa class 2 IEC General Section Power CONSUMPLION sssini 0400 sr 40 W DIMENSIONS 2 5 2 c0s cee tees sitetsiede W 440 mm 17 5 16 H 127 mm 5 D 410 mm 16 1 8 Weight n
88. ontrol Setting When playing a DVD recorded with Dolby Digital Surround set the dynamic range control according to the software being played For instance when the words are hard to be listened to due to effects sound in a movie this setting makes it possible to adjust the volume level of only the low level sound and can reduce repetition of complicated volume level adjustments At the factory the player has been set to Normal with which the audio levels recorded in discs are reproduced as they are Setting items Select to return to the previous screen Wide Select to reproduced the audio at the level recorded in the disc Normal Select to reduce the difference between the maximum and minimum volume levels Midnight Select to further reduce the difference between the maximum and minimum volume levels This setting is suitable for low level listening in late at night etc Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the SOUND menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select Dynamic Range Control by tilting the joystick up or down and press Digital Audio PCM Down Conversion Dolby Digital DTS Midnight MPEG Speaker Setting Custom Speaker Setting Quick Audio During Search Dynamic Range Control Audio Filter
89. or a few hours to dry up the condensation then retry operation 70 It takes long time before playback starts The disc type should be detected and motor rotation stabilized before starting playback This is normal and not a malfunction 72 A warning is displayed on the TV screen and play back is not possible The reproduced video may be disturbed or audio may be skipped when the disc surface is stained with fin gerprints or dirt Clean the disc surface by wiping it in the radial directions using a soft cloth 70 Ifthe disc is placed obliquely or on another disc place the disc correctly LSAS Playback may be unavailable due to viewing restric tion or region code problem 6 47 The top and bottom edges of the picture are cut off The video format of the played disc does not match that of the connected TV 2 Lu VCD cannot be played with menu playback Menu playback is not available when P B C is Off or the sequential play mode of the player is set to SEQ 2 25 Menu playback is possible only with P B C compat ible VCDs 24 DVD VIDEO cannot be played DVD VIDEO cannot be played when the sequential mode of the player is set to SEQ 2 Switch it to SEQ 1 25 LSS Subtitles are not displayed Subtitles are not displayed when the played DVD does not contain the recording of subtitles The subtitle language is set to Off 36 64 Audio or subtit
90. ot play a DVD VIDEO disc if its region code do not match that of this unit Also a disc which does not contain any region code may sometimes be unable to be played on the player When purchasing a DVD VIDEO disc make sure that it has a region code which can be played on your player Region Code of Player 4 Usable Country or Area Canada United States American Samoa Bermuda Johnston Island Midway Islands Puerto Rico St Pierre and Miquelon United States Virgin Wake Island Region Code of Player 2 Usable Country or Area Albania Andorra Austria Bahrain Belgium Bosnia and Herzegovina Bulgaria Croatia Cyprus Czech Denmark Egypt Finland France Germany Greece Hungary Iceland Iran Iraq Ireland Israel Italy Japan Jordan Kuwait Lebanon Lesotho Liechtenstein Luxembourg Macedonia Malta Monaco Netherlands Norway Oman Poland Portugal Qatar Romania San Marino Saudi Arabia Slovakia Slovenia South Africa Spain Swaziland Sweden Switzerland Syrian Arab Republic Turkey United Arab Emirates United Kingdom Vatican City State Yemen Yugoslavia Channel Islands Faeroe Islands Gibraltar Greenland Isle of Man Svalbard and Jan Mayen Islands Region Code of Player 3 Usable Country or Area Brunei Darussalam Cambodia Indonesia Korea Laos Malaysia Myanmar Philippines Singapore Thailand Viet Nam East Timor Hong Kong Macau Taiwan Region Code of Player
91. ps the information of the previous or next track Information items to are displayed in order of disc group or track The group information is not displayed with CD TEXT Information items to are not displayed with DVD VIDEO TEXT When information item has been displayed the player returns to the original status The character information display is canceled when any other button is pressed during display Ifthe played disc is not a TEXT DISC the display shows NO TEXT DISC for 5 seconds to indicate that this operation is not possible An information item which is not recorded is displayed as This operation is not available when the FL Mode is set to FL OFF by the DISPLAY button 65 Chapter 5 Applied Operations MP3 disc Operation Switching the character information When a MP3 disc is played the displayed character information can be switched over 1 Set the mode switch of the joystick remote to the Purple position 2 Each press of We displays the character information by scrolling then switches it Order of information in play mode Eile Title gt Folder Title gt Disc Title gt File Number The All character information function is not available with a MP3 disc Searching a desired folder file by its title MP3 files can be searched based on the title of the file or the folder containing the file 1 Set the mode switch of the joystick remote t
92. pull down menu the menu has more pages above or below the current page When the cursor is located on the bottom edge tilting the joystick downward makes it possible to advance to the next page When the cursor is located on the top edge tilting the cursor upward makes it possible to return to the previous page e L and J on the left and right edges of pull down menu indicates that tilting the joystick toward the left or right makes it possible to clear the pull down menu and move the cursor to the originally pressed icon The same effect is also available by pressing the RETURN button 4 Press to enter the selection in memory The OSD icon display varies depending on the content of change MAIN OSD Operation This section describes the display contents and controllable items ofthe MAIN OSD Note that certain items may not be controllable depending on the played disc and player status Po ois fae Tore im Co TOTAL Mm man 5 FEHLT LAEN a El Disc icon Shows the disc number Select to change the disc 31 Si El Group icon Shows the group number in DVD AU DIO disc Track icon Shows the track number in DVD AU DIO VCD or CD disc Folder icon Shows the folder number in MP3 disc Title icon Shows the title number in DVD VIDEO disc Chapter icon Shows the chapter number in DVD VIDEO disc File icon Shows the file number in MP3 disc Select an icon to change its content 3
93. r reverse search When performing forward search with a VCD DVD VIDEO or DVD AUDIO containing video and moving pictures AVIT Audio Video Title the audio output can be switched on or off only while the search is at the lowest speed step The audio is muted in the second and later speed steps This operation is not available with a MP3 disc While a still picture is displayed set the mode switch of the joystick remote to the Blue position and press REPEAT CHECK When OSD is displayed pressing the ON SCREEN button turns it off and shows the speed in place The first press of the lt lt or gt gt button starts slow playback or reverse slow playback at the lowest speed step Each further press increase the speed up to the fifth speed step The TV screen shows the speed as shown above The indicator varies according to the speed of the slow playback or reverse slow playback The display of the player shows the time display or SEARCH gt according to the status of the disc and player SEARCH is displayed When the time infomation is not displayed during DVD playback When P B C is on during VCD playback To restart normal playback press the button on the player main unit or the gt PLAY button on the joystick remote Audio is not output during slow playback or reverse slow playback Reverse slow playback is not available with VCD Slow playback and reverse slow playback are not av
94. r by tilting the joystick up down and to the left right Select the item to be set and press Speaker Setting Custom Test 6 Chapter 6 Various Setups To set the front speakers Select and adjust L or R The other non selected front speaker will automatically set to the same setting as the selected speaker To set the center speaker Select C To set the surround speakers Select and adjust SL and SR separately To set the subwoofer Select SW To output the test tone Select Test To exit from the screen Select Exit Select the desired speaker setting by tilting the joy stick up down and to the left right If is selected the screen in step 5 appears again without entering the performed changes in the speaker setting in memory S an R E a Front Speakers setting Speaker Setting Custom 2 Size Normal Level 12 11 10 9 8 7 6 5 4 3 2 1 0 dB Size Select Normal when the connected speaker is incapable of reproducing audio below 100 Hz Select Large when the connected speaker can reproduce audio below 100 Hz Level Set the volume level 0 12 dB After completing the speaker setting select Exit to enter the setting and return to the screen in step 5 57 a a 3 Y a a om z gt Delay Time Setting When playing a DVD recorded with Dolby Digital audio
95. re variable depending on country and area Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the VISUAL menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select Disc Menu Language by tilting the joystick up or down and press For Europe and U K Audio Language a French Subtitle Language Spanish Still Mode German FL Mode a Italian NTSC gt PAL Other SCART Output Select Except for Europe and U K Audio Language a French Subtitle Language Spanish Still Mode German FL Mode a Italian Other __ Black Level Setup 5 Select the language by tilting the joystick up or down then press to enter the selection in memory When Other ____ is selected set the mode switch of the joystick remote to the Orange position input the desired code No using the numeric keys and press the ENTER button Ifyou make a mistake when pressing numeric keys press the C button and restart the code No input from the beginning Audio Language Setting This setting makes it possible to select the language used to reproduce the audio recorded in the disc in the desired language If the selected language is not used in a specific disc the language specified as the priority language for the disc will be used A
96. re returns to still picture when the I button is released The picture frame is advanced for the same number of times as the button is pressed Hold the button when you want to advance picture frames sequentially To restart normal playback press the gt button on the player main unit or the gt PLAY button on the joystick remote When the IPB Display is set to On the TV screen shows Still I Still P or Still B every time the picture frame of DVD is advanced During playback set the mode switch of the joystick lt lt gt gt remote to the Blue position and press or REPEAT CHECK When OSD is displayed pressing the ON SCREEN button turns it off and shows the speed in place The first press of the lt lt or gt gt button starts forward search or reverse search at the lowest speed step Each further press increase the speed up to the fifth speed step The TV screen shows the speed as shown above The indicator varies according to the speed of the forward search or reverse search The display of the player shows the time display or SEARCH according to the status of the disc and player SEARCH is displayed When the time infomation is not displayed during DVD playback When P B C is on during VCD playback To restart normal playback press the button on the player main unit or the PLAY button on the joystick remote Video may be disturbed during forward search o
97. rsor cannot be moved to the icons of currently unavailable functions The OSD includes icons with a variety of functions The displayed icons are variable depending on the player status and played disc When the cursor is located on the left or right end if you attempt to move the cursor toward the outside the cursor will move to the opposite end To clear the OSD display move the cursor to the EXIT icon and press the ENTER button The same effect can also be obtained by pressing the ON SCREEN button From the displayed pull down menu select the desired item by tilting the joystick up or down or by setting the mode switch to the Orange postion and inputting the desired item number using to REPEAT and MENU FILE S A B REPEAT Example of pull down menu display 4a ue Goa ferm ee Ko a mann 3 3 28 40 Play a e AA BA ES Example of menu display when a number is in put 4 o ise tae Tor im Pron o S TOTAL AJ wan 5 3 28 40 ie 3 0 PENE er Jor fe When a group title chapter track folder or file number is input Ezz using numeric buttons the pull down menu display changes and the input number blinks in it The figure on the right of the input number shows the number of chapters in the disc If you commit a mistake in the numeric button input press the C button and restart the input from the beginning Chapter 4 OSD Operation When A and are displayed on the top and bottom of the
98. s set to a repeat play mode the REPEAT indicator in the display lights up and the character information display also shows the repeat mode information for a few seconds When the player is in stop mode only All or OFF can be selected This operation is not available with a DVD with which the elapsed play time information is not displayed 33 uonendo qAso m an e m 72 e 34 During playback of DVD AUDIO Off Repeat playback off Track Repeat playback of the track being played Group Repeat playback of the group being played Disc is displayed only when SEQ 2 indicator is lit All Repeat playback of all discs in the tray A A B repeat playback During playback of DVD VIDEO Off Repeat playback off Chapter Chapter Repeat playback ofthe chapter being Title played Title Repeat playback of the title being played All Repeat playback of all discs in the tray A A B repeat playback During playback of CD or VCD Off Repeat playback off Track Repeat playback of the track being played Disc Repeat playback of the disc being played All Repeat playback of all discs in the tray A A B repeat playback During playback of MP3 disc Off Repeat playback off File renee File Repeat playback of the file being played Disc All Folder Repeat playback of the folder being pl
99. s case set the player to the power standby mode Chapter 1 Connection of Equipment To Set Up of the Player Setup of Menu screen The language to be used in the menus of the player can be selected The default language set at the factory is English Player Menu Language Setting 62 Setups Related to TV The following setups can be made according to the TV connected to the player TV Aspect Setting 48 TV Mode Setting 49 TV Monitor Type Setting 50 ie S 5 5 3 o e 5 E 3 z Setup of SCART output signals The signals output from the TV SCART connector of the player can be selected Audio connection Connect the MIX LINE OUTPUT jacks S Video connection If the TV has an S Video input con nector connect the S VIDEO OUTPUT connector of the player to it using the provided S Video cable As S Video separates video signal into the luminance signal Y and color signal C it can provide sharper pictures than ordinary video connection Component video connection If the TV has component video input jacks connect the Y Cas and Cr COMPO NENT VIDEO OUTPUT jacks of the player to the cor responding jacks on the TV using video cables As component video separate video signal into the luminance signal Y and color difference signals Cs Cr it can provide sharper image than the S Video connection Depending on the TV or video monitor in use the terminal names may b
100. scrsscsccecsscececsssceeesceseesseeeeesees Accessories sierran Systems and Types of Playable Discs Unplayable Discs cccccsssssscccecesssssseeeeees DAA QD WwW N Icons Inscribed on DVD Discs 0000eseees Region Codes of This Player DVD VIDEO disc Only anne o Region codes of the DVD VIDEO discs that can be played with this player nennen nennen 7 Video Formats cccscessssssssceeceeessssceeesessesee 7 Checking the Video Format 7 Chapter 1 Connection of Equipment 8 Bofore Start 22sssssssnsnnnossnsssnsnsnsnnnnsnsnnssnsnnnnnn I Preparation of Remote Control Unit 9 Installing the batteries enenenenenenennenne 9 Remote control range neenenenenenenenensennenne 9 MP3 Files That Can Be Played Back with This Equipment ccccccssesssssceeereccsssceeeeeccsssceeeee D Connection with a TV or Stereo System 10 To Connecta TV usa sans 11 To Connect a Stereo System uuesssessnessnesnnesnnnensnnennnnn 11 To Set Up of the Player nnnennne 11 Connection with an AV Amplifier 12 To Connect an AV Amplifier 13 To Set Up of the Player neeneneneneneenn 13 Chapter 2 Controls and indicators 14 Front Panel sinne 15 4 Display ihn LO Switching the Display Brightness 16 Joystick Remote Control Unit
101. st is cleared The program can also be cleared by pressing the C button When All Clear is selected all tracks in the entire program list are cleared Stopping program playback 40 Perform operations in steps 1 and 2 ofthe procedure in Registering and playing the program then press W repeatedly until the player enters normal P MODE play mode track mode 33 The PGM indicator turns off Checking the program Set the mode switch of the joystick remote to the gt gt Purple position and press during program CHECK playback The program list is displayed on the TV screen When a program number is selected by tilting the joystick up or down and the ENTER button is pressed program playback starts from the selected program number The contents of the program numbers are also shown on the player display A program number can also be selected by pressing the CHECK button to move the cursor in the program list When 17 or more tracks are programmed the program list is displayed in more than one page In this case when the cursor is located on the bottom edge tilting the joystick downward makes it possible to advance to the next page When the cursor is located on the top edge tilting the cursor upward makes it possible to return to the previous page Chapter 5 Applied Operations Disc Random Playback Tracks in a desired disc can be played back in a random order Disc random playback
102. switch of the joystick remote to the Purple position TG 2 Press during playback to display the MAIN OSD Each further press of the button changes the time display icons as shown below Saas Single Time Elapsed play time of a track or ii 1 30 chapter SINGLE 12 30 TOTAL 28 50 TOTAL 45 50 The time display on the player s display is also switched accordingly When Total Time or Total Remain Time is selected the TOTAL indicator in the display lights up Single Remain Time Remaining time in a track or chapter Total Time Elapsed play time of a disc group or title Total Remain Time Remaining time in a disc group or title In the program or random play mode only Single Time and Single Remain Time can be switched over With a MP3 disc only the Single Time information is displayed 26 Repeat playback Repeat playback allows you to play the desired audio or video repeatedly Repeat playback is also available with the OSD operation 33 This function may be unavailable with certain discs 1 Set the mode switch of the joystick remote to the Purple position lt lt 2 Press during playback to display the MAIN REPEAT OSD Each further press of the button switches the repeat icons as shown Repeat playback is canceled when it is stopped except when All is selected When the player is set to the repeat play mode the REPEAT indicator in the disp
103. t off Track 1 23 4 5 gt 20 STANDBY mode While the STANDBY indicator is lit asmall amount of power is supplied to the system to back up the memory This is called standby mode Under the condition the system can be turned ON by the remote control unit When you are going to leave the listening room When the power is on or standby it can be turned off by pressing the POWER button on the player main unit The STANDBY indicator does not lit in this status Inserting discs The disc tray accommodates up to five discs The discs can be changed during playback without stopping the currently played disc Be sure to operate a button when opening closing the tray or rotating the tray Never attempt to move the tray with your hand OPEN CLOSE Aa 1 Press G5 on the player main unit to open the tray Pressing the button again closes the tray The label surface must face upward With a double sided disc load it so that the label information for the side you want to play faces upward Place the disc to be played along the groove on the tray To prevent malfunction do not place a disc obliquely or on another disc When handling a disc take care not to touch the disc surface Commercially available CD single 8 cm disc adapters cannot be used with this player 2 To insert or remove another disc by changing the tray DISC SKIP position press amp S on t
104. t the factory the audio language has been set to English Setting items 2 Select to return to the previous screen Original Select to play audio in the language specified as the priority language by the disc English Select to play menus in English French Select to play menus in French Spanish Select to play menus in Spanish German Select to play menus in German Italian Select to play menus in Italian Chinese Select to play menus in Chinese Other _____ Select to specify the language using a code No listed in the Disc Language Code Table 68 The languages displayed with this setting item are variable depending on country and area Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the VISUAL menu of SET UP MENU 3 Press to open the setup screen P Chapter 6 Various Setups 4 Inthe setup menu select Audio Language by tilting the joystick up or down and press For Europe and U K Player Menu Language Disc Menu Language nal Subtitle Language French Still Mode Spanish FL Mode German NTSC PAL Italian SCART Output Select Other Except for Europe and U K Player Menu Language Disc Menu Language Subtitle Language Still Mode FL Mode Black Level Setup 2 nal French Sp
105. t the type of time display information by tilting the joystick up or down then press If time search is required move the cursor to the time display icon to select the type of time display information then perform the operations in steps 4 and 5 Single Time Single Remain Time Total Time Total Remain Time 32 s The time search target time can be input is displayed with a CD or VCD Single Time Elapsed play time of track chapter or file Single Remain Time Remaining play time of track chapter or file Total Time Elapsed play time of disc group or title Total Remain Time Remaining play time of disc group or title Time search is not available in the program and random modes The time display can be switched between Single Time and Single Remain Time The time display icon in the OSD and the time display in the player display varies according to the change When Total Time or Total Remain Time is selected the TOTAL indicator in the display light up Set the mode switch of the joystick remote to the Orange position lt lt Input the time to start playback using to REPEAT MENU FILE S then press Input examples 1 hr 05 min 00 sec with a DVD 2022 0 ETUP REPEAT TEXT DISP REPEAT REPEAT 65 min 00 sec with a CD or VCD 8e IP TEXT DISP REPEAT REPEAT 1 min 28 sec ALLINFO _P B C ETUR TIM
106. ta of each frame by two Each frame of ordinary TV is constituted by displaying the fields alternately Frame still Field still DVD VCD Types of still pic tures obtained by temporarily stopping a moving pic ture The frame still picture may produce blur in the picture because it displays two specific fields alter nately but the picture quality is higher The field still picture has lower picture quality because it uses half the picture information of frame still but is not ac companies with picture blur IPB display DVD With the MPEG2 which is one of the video display methods of DVD each picture is divided into the following three picture types before being coded in digital signal I picture Intra coded This is the standard video and can constitute a picture by itself As the highest picture quality can be obtained the still image of I picture is most suitable for use when adjusting the picture quality P picture Predictive coded Picture calculated based on past pictures I picture or P picture B picture Bidirectionally predictive coded Pic ture calculated by comparing the previous and next pictures I pictures or P pictures This picture type contains least amount of video information P B C PlayBack Control VCD VIDEO CDs carry ing messages such as Playback Control Capable can be played interactively by selecting the desired play position or information in hierarchical structures while watching the
107. the distances from the listening position to the center and surround speakers should ideally be identical to those of all other speakers except for the subwoofer The delay time setting makes it possible to compensate for the difference in distances of actual speakers by delaying the audio output from the center speaker and surround speakers so that the sounds from all speakers reach the listening position at the same timing The delay time adjustment is available only with Dolby Digital Before starting the speaker setting see the following figure and measure distance A of the center speaker A Df Dc and distance B for the surround speakers B Df Ds The standard delay time settings can be identified based on these values and the following tables Ideal center speaker position Ideal surround speaker positions All speakers should be laid out within a circle as shown in the figure Delay time of center speaker Distance A A Df Dc Setting Value Approx 50cm 1 3 ms Approx 100 cm 2 6 ms Approx 150 cm 3 9 ms Approx 200 cm 5 3 ms If distance Df is equal to or shorter than Dc set to 0 Delay time of surround speakers Distance B B Df Ds Setting Value Approx 200 cm 5 3 ms Approx 400 cm 10 6 ms Approx 600 cm If distance Df is Ds set to 0 15 9 ms
108. tick up or down to switch the displayed menu name to SOUND or VISUAL When you press the RETURN button or tilt the joystick in the direction of arrow EXIT while the SET UP MENU screen is displayed the setup mode can be canceled 3 Press to open the setup screen P While a setup screen is displayed tilting the joystick toward EXIT allows the setup mode to be canceled and tilting it toward MENU returns to the SET UP MENU Chapter 6 Various Setups 4 Select the desired item by tilting the joystick in the required direction then press to open the setup change screen 5 Select a setting by tilting the joystick in the required direction and press to enter the change in memory Press the RETURN button or tilt the joystick to the left to return to the setup screen For actual setup operations see page 47 and after 45 S a ee ge gz a When MAIN is selected in SET UP MENU The setups according to the connected TV viewing restriction DVD VIDEO mode OSD position on screen messages and IPB display can be set amp MAIN TV Aspect 04 3 TV Mode Letterbox TV Monitor Type Standard OSD Position On Screen Message 2 On Normal IPB Display Off Rating Setting 47 Sets the viewing restriction of DVD VIDEO This functions only with DVD VIDEO discs compatible with viewing restriction TV Aspect Setting 42 Sets the picture aspect
109. ts to be displayed in the picture In case of 525 progressive scan picture problems it is recommended that the user switch the connection to the STANDARD DEFINITION output If there are questions regarding our TV set compatibility with this model 525p DVD player please contact our customer service center DO ear DIGITAL Manufactured under license from Dolby Laboratories DOLBY and the double D symbol are trademarks of Dolby Laboratories DIGITAL SURROUND Manufactured under license from Digital Theater Systems Inc US Pat No 5 451 942 5 956 674 5 974 380 5 978 762 and other worldwide patents issues and pending DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems Inc 1996 2000 Digital Theater Systems Inc All rights reserved As an ENERGY STAR Partner Kenwood Corporation has deter E mined that this products meets the ENERGY STAR guidelines for en ergy efficiency This product can save energy Saving energy reduces air pollution and lowers utility bills CAUTION For the U S A Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure In compliance with Federal Regulations the following are reproductions of labels on or inside the product relating to laser product safety NE N A E EE z KENWOOD CORPORATION 2967 3 ISHIKAWA CHO HACHIOJI
110. tting Quick Audio During Search Dynamic Range Control Audio Filter 5 Select Filter 60 kHz or Filter 110 kHz by tilting the joystick up or down then press to enter the selection in memory Chapter 6 Various Setups a Filter 60kHz Filter 110kHz S a an R E a 61 a a 3 Y a a om gt VISUAL Setting Player Menu Language Setting This setting makes it possible to select the language used to display the menus of the player At the factory the language used in displaying the menus of the player has been set to English Setting items lt gt Select to return to the previous screen English Select to display menus in English French Select to display menus in French Spanish Select to display menus in Spanish German Select to display menus in German Italian Select to display menus in Italian Japanese Select to display menus in Japanese Chinese Select to display menus in Chinese Taiwanese Select to display menus in traditional Chinese letters Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the VISUAL menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select Player Menu Language by tilting the joystick up or down and press 62 For Europe and U K
111. tton is pressed the display returns to the setting screen This effect can also be achieved by pressing the RETURN button or tilting the joystick toward the left If you select Change Password the screen for in put of the new password will open Input the new password using the numeric buttons and press the ENTER button When the password confirmation screen appears note the password in a memo and retain it in a safe place then pressing the ENTER but ton Chapter 6 Various Setups TV Mode Setting When the connected TV has a 4 3 aspect ratio while the played software is recorded in widescreen video the mode of TV screen display can be selected At the factory the player has been set to Letterbox Setting items Select to return to the previous screen Pan amp Scan Select to play widescreen software with pan amp scan specification on a pan amp scan screen screen with the left and or right edges cut off When widescreen software without pan amp scan specification is played with this setting it will be reproduced in the Letterbox screen mode S 7 2 ge gz a Letterbox Widescreen software without pan amp scan specification is reproduced in the Letterbox screen screen with black bands on the top and bottom 49 a a 3 Y a a om gt Operation procedure 1 Set the mode sw
112. udio Language Subtitle Language Still Mode FL Mode NTSC PAL SCART Output Select Field Except for Europe and U K Player Menu Language Disc Menu Language Audio Language Frame Subtitle Language Field Still Mode FL Mode Black Level Setup 5 Select the desired still mode by tilting the joystick up or down then press to enter the selection in memory FL Mode Setting This setting makes it possible to select the brightness of the player s display panel At the factory the player has been set to Brightness with which the display is permanently displayed in high brightness Setting items 2 Select to return to the previous screen Brightness The display is permanently in high brightness Dimmer The display is permanently displayed in low brightness Auto Off The display is automatically turned off with DVD or VCD The display is shown when DVD AUDIO without video is played At this time the Disc 1 to 5 indicators light in low brightness and other indicators are off Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the VISUAL menu of SET UP MENU 3 Press to open the setup screen P 4 In the setup menu select FL Mode by tilting the joystick up or down and press Chapter 6 Various Setups For Europe and U K
113. unctions of the player even before memorizing the functions of all buttons This chapter is composed of the following sections Basic OSD Operation 20 MAIN OSD Operation 31 SOUND OSD Operation 3 VISUAL OSD Operation 38 Ifthe on screen message or OSD is displayed outside the TV screen when using a widescreen TV or similar monitoring device set the OSD Position setting to Cinema uonendo qAso The OSD cannot be displayed when DVD is played by menu playback It may also be unavailable with certain discs The SOUND OSD and VISUAL OSD can be displayed only in a play mode 29 m an e m 72 e Basic OSD Operation Various operations can be performed by selecting the OSD icons on the TV screen using the joystick 1 Press to display OSD MAIN OSD 2 re ois J ae fom emer Peron Po TOTAL m Io Jim s fis _ 28 40 DEE AEA ri Pore fe nee the MAIN OSD can be displayed when the button is pressed in stop mode The up and down arrows shown in the above figure are not displayed When the button is pressed in a play mode the OSD can be changed by tilting the joystick up or down SOUND OSD Interlace Progressive Bar oD Wits im za HENG Scan 9 2 Select an OSD icon by tilting the joystick to the left 30 or right then press to display the pull down menu Tilt the joystick to move the cursor But the cu
114. up _3 2 a loz Y a Y A a lt 38 Switching the Play Modes The play modes of the player include the program mode disc random mode and all random mode in addition to the track mode for normal playback However with some DVDs and VCDs the partitions in the recording are not related with the track number assignment As a result repeat playback may not be available with such software 1 Set the mode switch of the joystick remote to the Orange position 2 While the player is in stop mode each press of Chapter 5 Applied Operations 39 gt az gz a e gr az m 8 N mie a el a loz Y a Y A a lt 7 Select to start program playback When the mode switch of the joystick remote is set to the Blue position and gt i is pressed the current track is skipped and the next track in the program will be played in the screen using the joystick then press Even when a disc is changed during programming the program playback plays the disc and track numbers as registered with the previous disc In this case the programming should be restarted from the beginning Clearing the program 1 Perform operations in steps 1 and 2 of the procedure in 2 Move the cursor to or Registering and playing the program 23 in the screen then press Every time Last Clear is selected the last track in the program li
115. ure by itself As the highest picture quality can be obtained the still image of I picture is most suitable for use when adjusting the picture quality P picture forward prediction coding Picture cal culated based on past pictures I picture or P picture B picture bidirectional prediction coding Picture calculated by comparing the previous and next pic tures I pictures or P pictures This picture type con tains least amount of video information When IPB Display is set to On the I P or B type of DVD still picture is displayed on the TV screen to help identify whether the picture is I picture P picture or B picture This makes it possible to find the I picture which is the standard video containing most amount of information At the factory the player has been set to Off with which the IPB display is not shown Setting items gt Select to return to the previous screen On Select to view the IPB display Off Select to not to view the IPB display Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press to SET UP display the MAIN menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select IPB Display by tilting the joystick up or down and press i Rating TV Aspect TV Mode TV Monitor Type DVD VIDEO Mode OSD Position On Screen Message IPB Display 5 Select On or O
116. us in French aller Spanish Spanish Select to display menus in Spanish Soup Bern German Select to display menus in German Other Italian Select to display menus in Italian Chi Select to displ in Chi a PR eee Aye 5 Select the desired subtitle language by tilting the Other _____ Select to specify the language using a code No listed in the Disc Language Code joystick up or down then press to enter the Table 68 oe The languages displayed with this setting item are sele on in memory variable depending on country and area When Other _____ is selected set the mode switch of the joystick remote to the Orange position input the desired code No using the 1 Set the mode switch of the joystick remote to the numeric keys and press the ENTER button Purple position Operation procedure Ifyou make a mistake when pressing numeric keys N i press the C button and restart the code No input 2 While the player is in stop mode press and tilt from the beginning 64 Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the VISUAL menu of SET UP MENU 3 Press to open the setup screen P P 4 In the setup menu select Still Mode by tilting the joystick up or down and press For Europe and U K Player Menu Language Frame Disc Menu Language A
117. us screen 8 No Limit Select to enable playback of any DVD discs whether their targets are adults general public or children 7 to 1 When DVD software containing the recording of restriction level an adult oriented disc or a disc including violence playback is restricted in accordance with the restriction level 0 Lock All Select to inhibit any DVD Use this setting for example when you want to inhibit playback of an adult oriented DVD which does not contain the restriction information Change Password Select to change the viewing restriction password which has been registered before This item cannot be selected unless a password has already been registered 47 S A i 7 E gz a Temporary Unlocked Select to disable temporarily the viewing restriction which has been set previously This item cannot be selected unless a password has been set previously Operation procedure 1 Set the mode switch of the joystick remote to the a a B Y a a om gt Purple position 2 While the player is in stop mode press to display the MAIN menu of SET UP MENU 3 Press to open the setup screen 4 In the setup menu select Rating by tilting the joystick up or down and press Rating E m 8 No Limit E 0 Lock All E Change Password E Temporary Unlocked 5 Select a viewing level by tilting the joystick up or 48 down then press to display the p
118. utlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help 71 Q g az 1 p 2 A mie I amp I _ 7 9 5 oO Symptoms and Treatment Playback starts but the video is not output The Pure Audio function is set to on 27 The input selection of the TV and or AV amplifier is incorrect or these devices are not turned on Connection cords are connected improperly 0 A 10 22 Playback starts but the audio is not output The Speaker Setting is incorrect 36 The input selection of the TV and or AV amplifier is incorrect or these devices are not turned on The volume of the TV and or AV amplifier is not ad justed properly Audio output cords are connected improperly The picture is disturbed during forward search or reverse search The picture disturbance during forward search or re verse is normal This is not a malfunction The picture is not neat or the video or audio quality is poor Connection cords are connected improperly 10 Era 10 22 A device generating noise is installed near the signal path The disc is dirty or damaged To prevent this remove dirt and handle discs carefully so as not to damage them 70 There may be condensation of dew on the optical lenses In this case leave the player with power ON f
119. video is played At this time the Disc 1 to 5 indicators light in low brightness and other indicators are off FL OFF The display is turned off At this time the Disc 1 to 5 indicators light in low brightness and other indicators are off When the power is off or standby the setting performed in FL Mode is given priority FL OFF cannot be selected with the FL Mode setting amp 3 Chapter 2 Controls and indicators Joystick Remote Control Unit When operating the joystick remote first set the mode switch to the Blue Purple or Orange position according to the purpose The buttons shown in the following figure always function in the same way When selecting a disc displaying a still regardless of the position of the mode switch The buttons with the same names picture or lettin g pl ayb ack pause x those on the player main unit have the same functions as the main unit temporarily uttons Set the mode switch to the Blue position The functions of some buttons change as shown below Mode switch 4Z to 12 Set to the Blue position ENTER button 21 24 amp 0 Joystick 30 PP PAGE INDEX A ie S F a a mie 5 amp a a i T a I pp ee buttons 22 PLAY button 21 Haa PAGE INDEX V rop menu ST ON SCREEN button 30 m STOP button 22 TOP MENU FOLDER S button _24 42 Der lt lt gt gt buttons 23 SQ MODE P MODE
120. ystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or down to display the SOUND menu of SET UP MENU 3 Press to open the setup menu P 4 In the setup menu select Digital Audio Dolby Digital by tilting the joystick up or down and press Digital Audio PCM Down Conversion Dolby Digital DTS MPEG Speaker Setting Custom Speaker Setting Quick Audio During Search Dynamic Range Control Audio Filter 5 Select the audio output by tilting the joystick up or down and press to enter the selection in memory Digital Audio DTS Setting When a DVD or DTS CD recorded in DTS is played this setting makes it possible to select the audio signal output from the digital output connector At the factory the player has been set to Bitstream to enable digital connection to an AV amplifier with built in DTS decoder For the nonexistent decoders set the Digital Audio setting to PCM Setting items e Select to return to the previous screen Bitstream The signal is output as a bitstream Select when connecting a component containing DTS decoder PCM The signal is converted onto 48 kHz 2CH PCM signal before being output Select when connecting a component without DTS decoder Operation procedure 1 Set the mode switch of the joystick remote to the Purple position 2 While the player is in stop mode press and tilt the joystick up or dow

Kenwood DNX9990HD GPS Receiver User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents