Indesit D41 Dishwasher User Manual
Contents
1. you need to clean the filter assembly this way the food particles are removed from the wash water allowing it to be recirculated during the cycle filtered perfectly For this reason it is a good idea to remove the larger food particles trapped inside the cup C and semi circular filter A after each wash All you need to do is rinse them under running water to remove these pull the cup handle upwards The entire filter assembly comprising a semi circular filter A a cup C and a cylindrical filter B should be cleaned thoroughly once a month Rotate filter B anticlockwise to remove it For cleaning use a non metallic brush Troubleshooting It may occur that the dishwasher does not function or does not function properly Before calling for assistance let us see what can be done first have you forgot to press one of the buttons or to perform an essential operation The Dishwasher Does Not Start Have you checked whether the plug is pushed into the socket correctly the power is on in the house the door is closed properly the ON OFF switch is on ON the water supply is turned on The Dishwasher Does Not Load Water Have you checked whether the water is turned on and the hose is connected properly the water supply to the house is on and has sufficient pressure the water supply hose is crimped or bent the filter for the water supply hose is2. Dishwasher in Shape After Every Wash After every wash turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside Remove the Plug Before cleaning or performing maintenance always remove the plug from the socket Do not run risks No Solvents or Abrasive Cleaning Products To clean the exterior and rubber parts of the dishwasher do not use solvents or abrasive cleaning products Rather use only a cloth and warm soapy water To remove spots or stains from the surface of the interior use a cloth dampened with water and a little white vinegar or a cleaning product made specifically for dishwashers When You Go on Holiday When you go on holiday it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket turn off the water supply and leave the door of the appliance slightly ajar This will help the seals last longer and prevent odors from forming within the appliance Moving the Appliance If the appliance must be moved try to keep it in the vertical position If absolutely necessary it can be positioned on its back Seals One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals Periodic cleaning with a damp sponge will prevent this from occuring Cleaning and Special Maintenance The filter assembly If you want consistent good results from your dishwasher
3. authorised Technical Service Centres for the replacement Electrical Connection Electrical Connection If your appliance is supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use Before using the appliance please read the instruction below WARNING THIS APPLIANCE MUST BE EARTHED THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN Replacing the fuse When replacing a faulty fuse a 13 amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re fitted If the fuse cover is lost the plug must not be used until a replacement is obtained Replacemente fuse covers If a replacement fuse cover is fitted it must be of the correct colours as indicated by the coloured marking or the colour that is embossed in words on the base of the plug Replacements can be obtained directly from your nearest Service Depot Removing the plug Ifyour appliance has a non rewireable moulded plug and you should wish to remove it to re route the mains cable through partitions units etc please esure that either the plug is replaced by a fused 13 amp re wireable plug bearing the BSI mark of approval Or the mains cable is wired directly into a 13 amp cable outlet controlled by a switch in compliance with BS 5733 which is accessible without moving the appliance Disposing of the plug Ensure that before disposing of the plug itself you make the pins unusa
4. by cutting the mains cable as close as possible to the plug body and dispose of it as described above Merloni Elettrodomestici Viale Aristide Merloni 47 60044 Fabriano Italy Tel 39 0732 6611 Fax 39 0732 662501 www merloni com 04 2002 195033760 00 xerox Business Services DocuTech
5. clogged The Dishes Are Not Clean Have you put the right amount of detergent into the dispenser Is the wash cycle suitable for the dishes you have placed inside the appliance Are the filter and microfilter clean Can the sprayer arms turn freely The Dishwasher Does Not Drain Have you checked whether the drain hose is crimped or bent Lime Deposits or a White Film Form on the Dishes Have you checked whether Reassemble the three parts as shown in the figures and reinsert the whole assembly into the dishwasher positioning it into its housing and pressing downwards The dishwasher is not to be used without filters Improper replacement of the filters may reduce the efficiency of the wash and even damage your dishwasher Cleaning the Sprayer Arms It may happen that food particles become encrusted on the sprayer arms and block the holes Check the sprayer arms periodically and clean them when needed see Close up View interior letters F I Cleaning the Water Inlet Filter Periodically clean the water inlet filter see figure 2 under Installation located on the outlet of the water supply tap After turning off the water tap unscrew the end of the water supply hose remove the filter and clean it carefully under running water Then return the filter to its place and tighten the water supply hose back into position the lid to the salt container is closed properly the rinse aid dosage is co
6. see figure to the side if necessary rotate the ring in the anti clockwise direction from the _ setting towards the sign based on the hardness of the water being used It is recommended that adjustments be made in accord ance with the following schema Water Hardness Be Autono Clarke Selector my degrees mmol position mption cycles 2 grams ami Pos oa7 e 16 36 ze we Baka 2 j 2 i z a j a men ao ao om oa gt 09 oo as Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used The dispenser must be refilled before the start of each wash cycle following the instructions provided in the Wash Cycle Table The detergent dispenser is located on the inside panel of the door Loading the detergent To open lid A press button B The cleaning detergent should be introduced into the two containers C and D up to the rim After pouring in the detergent replace the lid pressing down until it clicks Dishwasher detergent in tablets is now available on the market in which case you should place one tablet into container D and replace the lid e D 15 gr 5gr D Wa 111 O A Notice To facilitate closing the cover remove any excess detergent on the edges of the dispenser Warning Rinse Aid This product makes dishes sparkle more as it improves their drying The rinse aid c
7. top and bottom To adjust the rack open up the tabs that lock the guides and pull out the rack Arrange the rack with the back wheels in either the top or bottom position and then insert it along the guides until the front wheels are on as well Close the tabs to lock the rack in place see Fig F Load examples Turning on the Appliance Starting a wash cycle After having completed all of the installation steps in the preceding paragraphs turn on the water to the unit and press the ON OFF button A located on the control panel The B indicator light will come on At this point the appliance is on and ready to be programmed Starting and selecting the cycle Turn the cycle selector knob D until the reference notch on the knob corresponds with the number or the symbol for the cycle you wish to set have a look at the wash cycle table on page 7 After a few seconds you will hear a short beep and the indicator light G comes on indicating that the wash cycle has begun and it is not advisable to make any changes at this point Cycle phase indicator lights The dishwasher is provided with 4 indicator lights G which come on in sequence as the appliance is performing that specific phase of the wash cycle These phases are from left to right be y Y pre wash wash rinses drying Cancelling or modifying a wash cycle in progress Premise You can cancel the wash cycle in progress if i
8. Dishwasher Instruction for installation and use D 41 1 nDes t Safety Is a Good Habit to Get Into NOTICE Carefully read the instructions contained in this manual as they provide important information which is essential to safe and proper installation use and maintenance of the appliance C This appliance complies with the following EEC directives 73 23 EEC of 19 02 73 Low Voltage and subsequent modifications 89 336 EEC of 03 05 89 Electromagnetic Compatibility and subsequent modifications 1 Carefully dispose of the packing material 2 After removing the packing check to make sure that the appliance is not damaged If in doubt contact a qualified professional 3 The dishwasher must only be used by adults for the washing of household dishes and cooking utensils 4 Fundamental rules to follow when using the appliance Never touch the dishwasher when barefoot or with wet hands or feet We discourage the use of extension cords and multiple sockets During installation the power supply cord must not be excessively or dangerously bent or flattened If the appliance is not operating properly or maintenance must be performed disconnect the appliance from the power supply 5 Keep detergents out of the reach of children who must also be kept away from the dishwasher when it is open 6 This appliance cannot be installed outdoors not even if the area in which it is installed is covered
9. ble so that it cannot be accidentally inserted into a socket Instruction for connecting cable to an altenative plug Important the wires in the mains lead are coloured in accordance with the following code Green amp Yellow Earth Blue Neutral Brown Live CAUTION The dishwasher plug must be accessible even when the appliance is installed as a built in unit so that maintenance can be done safely 11 As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminal in your plug proceed as follows connect Green amp Yellow wire to terminal market E or coloured Green or Green amp Yellow Connect Brown wire to terminal marked L or coloured Red Connect Blue wire to terminal marked N or coloured Black If a 13 amp plug BS 1363 is used it must be fitted with a 13 amp fuse A15 amp plug must be protected by a 15 amp fuse either in the plug or adaptor or at the distribution board If you are in any doubt about the electrical supply to your machine consult a qualified electrician before use How to connect an alternative plug The wires in this mains lead are coloured in accordance with the following code BLUE BROWN GREEN AND YELLOW NEUTRAL N LIVE L EARTH E GREEN amp 13 amp fuse CROSS BAR CORD GRIP Disposing of the appliance When disposing of the appliance please remove the plug
10. by a roof it is also very dangerous to leave it exposed to the rain and elements 7 Do not touch the heating element during or after a wash cycle 8 Do not lean or sit on the door when it is open as this could overturn the dishwasher 9 If the appliance malfunctions turn off water supply to the appliance and disconnect the plug from the wall socket Then consult the section entitled Troubleshooting If you cannot resolve the problem contact a service centre 10 Appliances which are no longer being used must be made inoperable by cutting the power supply cord and removing the door lock To maintain the EFFICIENCY and SAFETY of this appliance we recommend e call only the Service Centers authorized by the manufacturer e always use original Spare Parts Close up View control panel gt o gt BD ON OFF Button ON OFF Light 999 Handle For Opening Door C Knob For Selecting Cycles Cycle phase indicator lights Close up View Interior N a BE Upper Rack Bottom Sprayer Arm Top Sprayer Arm 4 Salt Container Cap Rack Height Adjustor O Washing Filter Lower Rack Detergent and Rinse Aid Dispenser Technical characteristics Width cm 44 5 Depth cm 60 Height cm 85 Capacity 8 standard place settings Mains water pressure 20 KPa 1MPa 0 2 10 bar Power voltage See data plate Total absorber power See data plate Fuse See data plate Salto Salt The hardness of the water varies f
11. ed which results in reduced performance If the pots and pans have baked on food that is extremely hard to remove we recommend that they be allowed to soak before they are washed This will eliminate the need for extra wash cycles Pull out the racks to facilitate loading the dishwasher How to Use the Lower Rack We recommend that you place the most difficult to clean items on the bottom rack pots pans lids serving dishes and bowls as shown in the figure to the right It is preferable to place serving dishes and lids on the sides of the racks in order to avoid blocking the rotation of the top spray arm Pots serving bowls etc must always be placed top down Deep pots should be slanted to allow the water to flow out Silverware should be placed in the silverware basket with the handles at the bottom If the rack has side baskets the spoons should be loaded individually into the appropriate slots see fig A Especially long utensils should be placed in the horizon tal position at the front of the upper rack How to Use the Upper Rack The upper rack is designed to hold more delicate and lighter dishware such as glasses coffee and tea cups and saucers as well as plates small bowls and shallow pans as long as they are not too dirty Position the dishes and cookware so that they do not get moved by the spray of water How to adjust the Upper rack The top rack can be adjusted using the two rack heights
12. ion The back should rest against the wall behind it and the sides along the adjacent cabinets or wall The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation Levelling the Appliance Once the appliance is positioned adjust the feet screwing them in or out to adjust the height of the dishwasher making it level In any case the appliance should not be inclined more than 2 If the appliance is level it will help ensure proper perfor mance This dishwasher model can be built in under the one worktop and it therefore comes provided with an instructions sheet Cold Water Connection Connect the cold water supply hose to a threaded 3 4 gas connector inserting the small filter supplied with the dishwasher and making sure that it is fastened tightly in place see figure 2 If the water pipes are new or have not been used for an extended period of time let the water run to make sure that the gt water is clear and free of impurities If this precaution is m not taken there is a risk that the a Fig 2 water inlet can get blocked and damage the appliance Hot Water Connection The water supply to the appliance can also be connected to the house s hot water line centralised system heating system as long as it does not exceed a temperature of 60 Es In this case the wash cycle time will be shortened by about 15 mi
13. k Cycle selection instructions Very dirty dishes and pans not to be used for delicate items Normally dirty pans and dishes Standard daily cycle Economic and fast cycle to be used for slightly dirty dishes Run cycle immediately after use No drying Preliminary wash cycle for dishes and pans awaiting completion of the load with the dishes from the next meal Cycle description Pre wash with cold water Pre wash with hot water at 45 C Extended wash at 70 C Cold rinse Rinse with hot water at 70 C Drying 2 pre washes with cold water Extended wash at 55 C Rinse with hot water at 70 C Drying Short wash at 45 C Cold rinse Short cold wash to prevent food from drying onto the dishes Detergent for pre wash wash 5 15 gr Rinse Aid Energy Saving Tips It is important to try and run the dishwasher when it is fully loaded in order to save on energy In order to prevent odors from forming and food from caking onto the dishes you can run the hold cycle Choose the right wash cycle the choice of cycle depends on the type of dishware cookware and utensils being washed and how dirty they are Use the right amount of detergent if you use too much detergent the result will not be cleaner dishes but rather a greater negative impact on the environment There is no utility in rinsing dishes cookware and utensils before placing them in the dishwasher How to Keep Your
14. nutes and the wash efficiency slightly reduced The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line Drain Hose Connection Insert the drain hose into a drain pipe with a minimum diameter of 4 cm or let it run into the sink making sure to avoid bending or crimping it Use the speical plastic support that comes with the appliance see figure to the right The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water Attention The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain Electrical Connection After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate located on the stainless steel inner door of the appliance and that the electrical system is sized for the maximum voltage on the rating plate insert the plug into an electrical socket which is earthed properly the earthing of the appliance is a safety requirement mandated by law If the electrical socket to which the appliance must be connected is not appropriate for the plug replace the plug rather than using adpators or the like as they could cause overheating and burns Should the electricity supply cable be damaged we recommend that you only contact
15. ontainer is situated on the inside of the appliance door you should refill it when you see the container is empty by means of indicator D If your dishwasher is fitted with a low rinse aid indicator light fill the container up when the indicator light flashes or lights up Loading the Rinse Aid To open the dispenser turn the C cap in the anti clockwise direction and then pour in the rinse aid making sure not to overfill The amount of rinse aid used for each cycle can be regulated by turning the F dose adjustor located beneath the C cap with a screwdriver There are 6 different settings the normal dosage setting is 2 Important Proper dosage of the rinse aid improves drying If drops of water remain on the dishes or spotting occurs the dosage adjustor should be turned to a higher setting If the dishes have white streaks turn the dosage adjustor to a lower setting Three in one dishwasher tablets are now available on the market and combine the detergent salt and rinse aid all in one If the water in your area is hard or very hard we still recommend you pour extra salt into the relevant dispenser to prevent the formation of white streaks on your dishes or on the appliance interior In any case please read the manufacturer s instructions provided on the packet Loading the Dishwasher Before placing the dishes in the dishwasher remove the larger food particles to prevent the filter from becoming clogg
16. rom place to place If hard water is used in the dishwasher deposits will form on the dishes and utensils The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water Loading the Salt into the Softener Always use salt intended for use with dishwashers The salt container is located beneath the lower rack and should be filled as follows 1 Remove the lower rack and then unscrew and remove the cap from the salt container 2 If you are filling the container for the first time fill it with water 3 Place the end of the funnel supplied into the hole and introduce about 2 kg of salt It is normal for a small amount of water to come out of the salt container 4 Carefully screw the cap back on The salt container should be filled after about every 30 wash cycles Warning To prevent rust from forming we advise you to load the salt before starting a wash cycle Adjusting Salt Consumption The dishwasher is designed to allow for adjusting the amount of salt consumed based on the harness of the water used This is intended to optimize and customize the level of salt consumption so that it remains at a minimum Your Local Water Board can supply the degree of hardness of the water in your area To adjust salt consumption pro ceed as follows 1 Unscrew the cap from the salt container 2 There is a ring on the container with an arrow on it
17. rrect Error messages Your dishwasher is equipped with a safety system which is able to detect any operating anomalies These anomalies are reported by one or two cycle phase indicator lights G flashing rapidly Take a note of which lights are flashing turn the appliance off and call for technical assistance Tap off alarm If you have forgotten to turn the water tap on your appliance will remind you of this by sounding a few short beeps for a few minutes Turn the tap on and your appliance will start up again after a few minutes Were you to be absent when these beeps are sounded the appliance will be blocked automatically and cycle phase 2 and 3 indicator lights wash and rinses will flash rapidly Turn the appliance off at the ON OFF button turn on the water tap and wait approximately 20 seconds before turning the appliance back on now the program will start If despite all these checks the dishwasher still does not function and or the problem persists contact the nearest authorised service centre and provide them with the following information the nature of the problem the model type number Mod and the serial number S N which are indicated on the plate located on the side of the inner part of the door Never call on unauthorised technicians and refuse to allow parts to be installed that are not original spare parts Installation Positioning the Appliance Position the appliance in the desired locat
18. t has only just started To modify a wash cycle in progress turn the knob anti clockwise and set it to Reset after a few seconds you will hear 4 beeps and indicator light G will go out this means all the settings have been cancelled You are now free to re set the correct wash cycle If you forget to load some of the dishes The wash cycle can be interrupted by pressing the ON OFF You can then load additional dishes and turn the appliance back on The cycle will start where it left off At the end of the wash cycle The end of the wash cycle is signalled by 2 short beeps and a flashing drying phase indicator light G Set the knob to the Reset position to clear all settings Turn the appliance off by pressing button A thus cutting off the electricity supply Turn off the water tap Wait a few minutes before unloading the dishes they are very hot If you wait a little while they dry better thanks to the steam Empty the lower rack first Make sure the wash cycle has ended before removing the dishes There s been a power failure Have you opened the dishwasher door The wash cycle stops and then restarts when the electricity comes back on or when you close the door Warning If opening the door soon after the end of the programme or during it stand away from the Dishwasher to avoid possible injury from hot steam Wash Cycle Table Cycle 1 Heavy Duty 2 Normal wash 3 Rapid 25 4 Soa
Download Pdf Manuals
Related Search