Home

IBM 31P8128 Computer Drive User Manual

1. Check to make sure your new and previous computers don t have the same computer name If they do change the name of one of them See ENEE a SO and change a computer name in Windows If you are using the IBM Data transfer software to migrate to Windows 95 Windows 98 or Windows Me or Windows 2000 make sure you have enough free space on your previous computer To transfer data successfully using the IBM Data Transfer software your previous computer must have free space equal to the amount of data you are transferring at one time Check the free space on your C drive to make sure you have enough If not you can perform the migration several times transferring smaller amounts of data each time Note To check hard drive free space double click the My Computer icon right click on the hard drive and select Properties The hard drive Properties window displays the amount of free space When migrating to Windows XP if the Home or small office network is grayed out your computers cannot connect to each other Try one or more of the following actions to correct the problem a Check that the crossover cable is connected securely to the Ethernet ports on both computers Check to make sure you are using the correct cable a standard Ethernet cable will not work b Ensure the IP and DNS settings are configured correctly according to the instructions in Migrating data to a computer running Windows XP on page 1 49 c Make sure you a
2. Do the following 1 Right click Local Area Connection and then click Properties If more than one Local Area Connection icon is available click the one that represents the active network connection for your computer Click Install gt Protocol gt Add gt Microsoft gt NetBEUI protocol and then click OK Click Install gt Service gt Add gt File and Print Sharing for Microsoft Networks and then click OK Close the Local Area Connection Properties window Close the Network and Dial up Connections window Click here Al to exit this help window and to continue with the transfer process Windows 95 Windows 98 and Windows Me a If network support needs to be installed on your previous computer you will see the following window open Note If you do not see this window proceed to step 16 Network support is already installed IBM Data Transfer 7 Network support will be installed now Your system will reboot automatically when complete Do you wish to continue b Click Yes and network support will be installed Click OK to restart the computer when prompted Proceed to step 14 Note When Windows is installing Network support you may be prompted to insert your operating system disk If so insert the operating system disk and click OK Installation and user s guide 1 37 Note When Windows is installing Network support you may see several Version Conflict windows If any of these windo
3. Windows Millennium Edition Me Windows XP Home Edition Windows XP Professional Windows Me Windows 98 Second Edition SE Windows XP Home Edition Windows XP Professional Windows 2000 Windows Me Windows 98 SE Windows 98 Windows 98 Windows XP Home Edition Windows XP Professional Windows 2000 Windows Me Windows 98 SE Windows 98 Windows 95 Windows XP Home Edition Windows XP Professional Windows 2000 Windows Me Windows 98 SE Windows 98 Windows 95 System requirements The computers that you are transferring data between do not have to be the same type For example you can transfer data from a desktop computer to a mobile computer and vice versa The following are requirements for the new and previous computer New computer e Pentium class microprocessor or later e Windows XP Professional Windows XP Home Edition Windows 2000 Windows Me Windows 98 SE Windows 98 Windows 95 e For migration to Windows XP only a diskette drive in or that can be connected to the new computer or a Windows XP CD and a CD ROM or DVD ROM drive in the old computer 32 MB memory e Free space on the hard disk equal to the amount of data to be transferred 1 2 IBM Data Migration Kit User s Guide Ethernet adapter Previous computer e Pentium class microprocessor or later Windows XP Professional Windows XP Home Edition Windows 2000 Windows Me Windows 98 SE Windows 98 Windows 95 e
4. e You will be prompted to click OK to change the settings Click OK and the resolution will be changed f When prompted if you want to keep the setting click Yes and the resolution will be changed Windows XP Installation and user s guide 1 71 a Click Start gt Control Panel gt Appearance and Themes gt Display b On the Settings tab under Screen resolution drag the slider to the desired resolution and then click Apply c When prompted to apply the settings click OK d You will be prompted to click Yes to change the settings Click Yes and the resolution will be changed 6 To make data migration easier in the future you should save all your documents into a single folder or path A good place to store your documents is in the My Documents folder you can create subfolders within this directory The next time you perform data migration you will know where all your data files are located 1 72 IBM Data Migration Kit User s Guide Appendix A Troubleshooting hints and tips The following section describes troubleshooting assistance Troubleshooting If you have problems performing the data migration refer to the following troubleshooting instructions for assistance If you receive an error message and have problems performing the data migration refer to the possible causes below 1 Make sure you are logged on properly to both computers Refer to this table for logon requirements New Comput
5. Es 3 Floppy amp Other for example a removable drive or network drive You can save files and settings to any disk drive or folder on your computer Folder or chive ae eres onen 7 At the next window select the items you want to transfer Click Next In this illustration the transfer Both files and settings option is selected Note If you select the Settings only then all default settings will be migrated If you select Files only then all files of default file types will be transferred If you select Both files and settings then all default settings and default file types will be transferred To customize which settings and files are transferred select Let me select a custom list of files and settings when I click Next This Installation and user s guide 1 67 option is for advanced users Files and Settings Transfer Wizard A What do you want to transfer What do you want to transfer Based on your current selection the following items will be transferred C Settings only Files only Both files and settings Settings Accessibility Command Prompt settings Folder options Intemet Explorer settings Microsoft Netmeeting Mouse and keyboard Network printer and drives Outlook Express Regional settings Screen Saver selection Let me select a custom list of files and settings when click Next for advanced users 8 The Files and Settings Transfe
6. Set up Remote Desktop Connection Set up a home or small office network Transfer files and settings Browse this CD View the release notes Back X Exit Installation and user s guide 1 65 1 66 On the previous computer the Files and Transfer Wizard starts Files and Settings Transfer Wizard Welcome to the Files and Settings Transfer Wizard This wizard helps you transfer files and settings from your old computer to pour new one You can transfer settings for Internet Explorer and Dutlook Express as well as desktop and display settings dial up connections and other types of settings The best way to use this wizard for transferring files and settings is to use either a direct cable connection or a network Learn more about connecting your computers Please close any other programs before you continue To continue click Next Next gt Cancel At the next window select Home or small office network and then click Note If the Home or small office network is network is not available as an option then your computers cannot connect Refer to Appendix IBM Data Migration Kit User s Guide A Troubleshooting on page A 1 Files and Settings Transfer Wizard Select a transfer method Direct cable a cable that connects your computers serial ports ransfer large amounts of data Floppy drive or other removable media Make sure both computers have the same type of drive
7. Restart your computer Beginning the data migration to Windows XP from all supported operating systems Before performing the migration read the suggestions in the section below Suggestions before migration If you are migrating the My Documents folder from a computer that has multiple users and you will want to use the same user names on the new computer you should create the user names on the new computer before beginning the migration Creating the user name on the new computer before the migration will cause the My Documents folder for that user to be created before the migration Then when the data files from the My Documents folder for that user on the old machine are migrated they will be placed properly in the My Documents folder on the new machine Creating a user name on the new machine after migrating the My Documents folder for that user from the previous machine may change the location of the files in My Document s You will be creating a My Documents folder for that user during the migration as well as when setting up the new user name 1 54 IBM Data Migration Kit User s Guide Follow the instructions below to begin the data migration to Windows XP These instructions should be used if your previous computer s operating system is Windows XP Windows 2000 Windows Me Windows 98 or Windows 95 You should have already configured your IP and DNS settings in the above section 1 On the new computer click Start gt File
8. Device window 11 The Update Wizard displays the message that the device driver has been found Click Next 12 Click Finish 13 Restart your computer when prompted 14 Proceed to Connecting the computers on page 1 11 Windows 95 Have your Windows 95 installation CD or diskettes available you will be prompted for them when you install the new adapter Follow this procedure to install the Ethernet device drivers in Windows 95 1 1 8 After you install the Ethernet adapter in the computer start the computer Windows 95 detects the adapter as a PCI Ethernet device and the New Hardware Found window opens Depending on your version of Windows 95 either the Update Device Driver wizard or the New Hardware wizard window opens Note If the New Hardware Found window does not open and Windows 95 starts normally you might need to manually add the device drivers Follow the instructions for Manually adding the Ethernet device drivers with Windows 95 Insert the IBM Data Migration User s Guide and Software CD into the CD ROM drive if it is not already inserted If the CD browser window opens after you insert the CD close that window Follow the on screen instructions to install the device drivers When the adapter is added it is shown in the Network Adapters list Follow the prompts for any Windows 95 installation disks and restart the computer when prompted Proceed to Connecting the computers on page 1 11
9. For migration to Windows XP only a diskette drive in or that can be connected to the old computer or a Windows XP CD or a CD ROM or DVD ROM drive in the old computer 32 MB memory e Free space on the hard disk equal to the amount of data to be transferred for Windows 2000 Windows Me Windows 98 and Windows 95 only e Available PCI slot PCI Kit only e Available PC Card slot PC Card Kit only The data migration process To use the IBM Data Migration Kit your new IBM computer must already have an Ethernet adapter Your previous computer also must have an Ethernet adapter If your previous computer does not already have an Ethernet adapter you should have purchased the PCI Kit for desktop computers or the PC Card for mobile computers Each of these kits contains an Ethernet adapter that you can install in your previous computer If your previous computer already has an Ethernet adapter you should have purchased the Basic Kit The data migration consists of these basic steps for migrating to a computer running Windows 2000 Windows Me Windows 98 or Windows 95 1 If your previous computer does not have an Ethernet adapter install the Ethernet adapter and device drivers in your previous computer 2 Connect the Ethernet ports on your new computer and previous computer using the crossover cable included in the kit 3 Install and run the IBM Data Transfer on the new computer 4 Install and run the IBM Data Transfer on the p
10. IBM Corp 2002 v Online technical support Telephone technical support IBM Statement of Limited Warranty Z125 4753 06 8 J 2000 Part 1 General Terms A ee ee ee Part 2 Country unique Terms Appendix C Notices Processing date data Trademarks 3 Electronic emission notices Federal Communications Cormission FCC statement vi IBM Data Migration Kit User s Guide B 1 B 2 B 3 B 3 C 1 Cl Cl C3 About this book This guide contains information about the IBM Data Migration Kit The guide is divided into two parts Part 1 Installation and user s guide This section contains the product description installation and operating instructions and is translated into the following languages French e German e Spanish e Italian e Brazilian Portuguese Traditional Chinese e Japanese Part 2 Appendixes This section contains help and service warranty and notice information Be sure to retain your proof of purchase It might be required for warranty service Registering your option Thank you for purchasing OPTIONS by IBM Please take a few moments to register your product and provide us with information that will help IBM to better serve you in the future Your feedback is valuable to us in developing products and services that are important to you as well as in developing better ways to communicate with you Register your option on the IBM Web site at http www ibm com p
11. IBM Data Migration Kit User s Guide If the Add New Hardware Wizard window does not open in step 1 of the previous procedure check the Device Manager list to see if the new adapter is present If it is not follow these instructions to manually add the adapter Manually adding the Ethernet adapter device drivers with Windows 95 Click Start gt Settings gt Control Panel From the Control Panel double click the System icon Click the Device Manager tab Double click Other Drives question mark icon in the list area Double click PCI Ethernet Controller Click the Driver tab and then click Update Driver Insert the IBM Data Migration User s Guide and Software CD into the CD ROM drive if it is not already inserted If the CD browser window opens after you insert the CD close that window At the Update Device Driver wizard click No and click Next 9 Click Have Disk 10 In the Select Device window type e Drivers Intel w9x where e represents the drive letter of the CD ROM drive Click OK 11 Follow the instructions to install the device drivers When the adapter is added it is shown in the Network adapters list 12 Follow any prompts for Windows 95 Installation disks and restart when prompted 13 Proceed to Connecting the computers on page 1 11 Installing the Ethernet adapter in a mobile computer PC Card Kit If your previous computer is a mobile computer without an Ethernet adapter follow this procedur
12. The following is added to this Section Disputes and differences arising out of or in connection with this Agreement shall be finally settled by arbitration which shall be held in Singapore in accordance with the rules of the International Chamber of Commerce ICC The arbitrator or arbitrators designated in conformity with those rules shall have the power to rule on their own competence and on the validity of the Agreement to submit to arbitration The arbitration award shall be final and binding for the parties without appeal and the arbitral award shall be in writing and set forth the findings of fact and the conclusions of law All proceedings shall be conducted including all documents presented in such proceedings in the English language The number of arbitrators shall be three with each side to the dispute being entitled to appoint one arbitrator The two arbitrators appointed by the parties shall appoint a third arbitrator before proceeding upon the reference The third arbitrator shall act as chairman of the proceedings Vacancies in the post of chairman shall be filled by the Appendix B Warranty information B 7 president of the ICC Other vacancies shall be filled by the respective nominating party Proceedings shall continue from the stage they were at when the vacancy occurred If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other party appoints its the first appointed
13. Windows 98 Windows 985E Windows ME Windows NT 4 0 Windows 2000 and Windows XP 32 bit lt Back Cancel x 4 The Files and Settings Transfer Wizard window continues At this point you will need to either create a Wizard disk using a diskette and the diskette drive on your new computer or select to use the Windows XP CD e If you will be using a diskette to create a Wizard disk select I want to create a Wizard disk in the following drive and select 3 2 Floppy A as shown below Proceed to step 5 Note If A is not the drive letter of the diskette drive in your new computer select the appropriate drive If you will be using the Windows XP CD select I will use the Wizard from the Windows XP CD and proceed to Migrating to Windows XP using a Windows XP CD on page 1 63 1 56 IBM Data Migration Kit User s Guide Files and Settings Transfer Wizard Do you have a Windows XP CD You will also need to run this wizard on your old computer You can either create a wizard disk to use on your old computer or use the wizard from the Windows XP CD To create a Wizard Disk insert a blank formatted disk into this computer s disk drive Make sure the old computer has the same type of drive Oi B 3 Floppy 4 O I already have a Wizard Disk O will use the wizard from the Windows XP CD O don t need the Wizard Disk have already collected my files and settings from my old computer Insert
14. and File and Print Sharing for Microsoft Networks are selected Click OK to exit Close the Network and Dial up Connections window Click here Al to exit this window and continue with the transfer process Installation and user s guide 1 35 1 36 10 x E Configure settings Configure your local area connection File and Print Sharing for Microsoft Networks is installed on your computer Make sure File and Print Sharing for Microsoft Networks is enabled and then install NetBIOS Extended User Interface NetBEUT protocol Do the following 1 Right click Local Area Connection and then click Properties If more than one Local Area Connection icon is available click the one that represents the active network connection for your computer Make sure the check box for File and Print Sharing for Microsoft Networks is selected Click Install gt Protocol gt Add gt Microsoft gt NetBEUI protocol and then click OK to install and enable the NetBEUI protocol Close the Local Area Connection Properties window Close the Network and Dial up Connections window Click here Al to exit this help window and to continue with the transfer process IBM Data Migration Kit User s Guide Ej Configure settings Configure your local area connection Both the NetBIOS Extended User Interface NetBEUI proto amp ol and File and Print Sharing for Microsoft Networks components must be installed on your computer
15. during the warranty period and IBM or your reseller are unable to either 1 make it do so or 2 replace it with one that is at least functionally equivalent you may return it to your place of purchase and your money will be refunded Extent of Warranty The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment improper maintenance by you or failure caused by a product for which IBM is not responsible The warranty is voided by removal or alteration of Machine or parts identification labels THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THESE WARRANTIES GIVE YOU Appendix B Warranty information B 3 SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD Items Not Covered by Warranty IBM does not warrant uninterrupted or error free operation of a Machine Any technical or other support provided for a Machine under warranty such as assi
16. e Crossover cable e PCI Ethernet adapter for desktop computers PCI Kit only Ethernet PC Card and converter cable for mobile computers PC Card Kit only To use the data migration kit the previous computer and new computer must have an Ethernet adapter installed The PCI Kit for desktop computers and the PC Card Kit for mobile computers each include an Ethernet adapter that must be installed in the previous computer if that computer does not already have an Ethernet adapter The Basic Kit does not include an Ethernet adapter Contact your place of purchase if an item is missing or damaged Be sure to retain your proof of purchase and packing material They might be required to receive warranty service O Copyright IBM Corp 2002 1 1 You can perform the data migration process between two computers with Windows operating systems The computers can have different operating systems however not all Windows operatin o system combinations are supported See pr ing system combinations Supported operating system combinations You can migrate to these operating systems on your new computer If the previous computer operating system is The following operating systems are supported for the new computer Windows XP Home Edition or Windows XP Professional Windows XP Home Edition Windows XP Professional Windows 2000 Professional Windows XP Home Edition Windows XP Professional Windows 2000
17. in the United States of America recovered post consumer fiber 1P P N 31P8128
18. is this New The computer to which you are transfering data computer Previous The computer from which you are transferring data computer nstallShield lt Back Cancel 7 In the Setup Configuration window select I already have the IBM Data Transfer program installed and then click Next InstallShield Wizard x Setup Configuration How would you like to install the IBM Data Transfer Program on the new computer You can create installation files on a diskette drive copy the setup files to a removable media device or download the program onto your new computer from the IBM website C want to make installation disks using a diskette drive want to copy the setup program ta a removable media device with at least 3 MB of disk space available already have the IBM Data Transfer program installed or will download the program to ithe new computer If you have set up an internet connection on your new computer you listell Shield lt Back Cancel 1 30 IBM Data Migration Kit User s Guide 8 In the Choose Destination Location window accept the default folder and then click Next InstallShield Wizard Choose Destination Location Select folder where Setup will install files IAetzllemeid Installation and user s guide 1 31 9 In the Select Program Folder window click Next The program is then installed to your previous computer InstallShield Wizard Select Program
19. must insert the connector on the crossover cable to the free end of the converter cable connected to PC Card See the following illustration Insert the connector on the opposite end of the cable to the Ethernet port of your new computer Installation and user s guide 1 11 The following illustration provides an example of two computers connected Note This illustration represents a unique configuration Your configuration might vary For example you might have two mobile computers or two desktop computers The PCI or PC Card slots and Ethernet ports might be in different locations Migrating data Depending on the operating system on your new computer the migration process varies e If you will be migrating to a computer running Windows 2000 Windows Me Windows 98 or Windows 95 see running Windows 2000 Windows Me Windows 98 or Windows 95 e If you are migrating to a computer running Windows XP see data to a computer running Windows XP on page 1 49 Migrating data to a computer running Windows 2000 Windows Me Windows 98 or Windows 95 Before performing the migration read the suggestions in the section below Suggestions before migration 1 Many documents are saved to the My Documents folder by default If you have created more than one user on your previous computer there may be more than one folder called My Documents The IBM Data Transfer program prompts you to choose the data
20. ne disks are diskettes floppy disks or disks for Zip Jaz LS 120 or micro ves A network connection can be your local area network LAN m2 a 7 f lt Back Cancel Help Installation and user s guide 1 21 16 The following window displays the items you have selected to transfer Click Next IBM Data Transfer x Transfer data to your new computer Before continuing please read You hawe chosen to transfer data using a local area network Network settings Windows desktop settings Folder contents To continue click Next 17 If not already installed network support will need to be added to your new computer Use the following instructions for the operating system on your new computer to check and add network support Windows 2000 a The Network and Dial up Connection window opens Ex Network and Dial up Connections A i loj xi Fie Edt view Favorites Tools Advanced Help a Back gt Search LiFolders Histo US GE X A Er Address En Network and Dial up Connections es Status i Make Mew Connection E31BM Global Network a Disconnected Network and Dial Local Area Connection 4 Enabled up Connections This folder contains network connections For this computer and awizard to help you create a new connection To create a new connection click Make New Connection To open a connection click its icon To access settings and comp
21. read Part 1 and the country unique terms in Part 2 that apply to your country or region Part 1 General Terms This Statement of Limited Warranty includes Part 1 General Terms and Part 2 Country unique Terms The terms of Part 2 replace or modify those of Part 1 The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use and not for resale from IBM or your reseller The term Machine means an IBM machine its features conversions upgrades elements or accessories or any combination of them The term Machine does not include any software programs whether pre loaded with the Machine installed subsequently or otherwise Unless IBM specifies otherwise the following warranties apply only in the country where you acquire the Machine Nothing in this Statement of Limited Warranty affects any statutory rights of consumers that cannot be waived or limited by contract If you have any questions contact IBM or your reseller The IBM Warranty for Machines IBM warrants that each Machine 1 is free from defects in materials and workmanship and 2 conforms to IBM s Official Published Specifications Specifications The warranty period for a Machine is a specified fixed period commencing on its Date of Installation The date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise If a Machine does not function as warranted
22. that will be migrated by selecting folders If there is more than one user on your previous machine and you want to transfer the My Documents folder for each user make sure to check the following locations and select the My Documents folder if it exists the username will vary depending on the user accounts available on the machine 1 12 IBM Data Migration Kit User s Guide Windows 2000 c Documents and settings username My Documents c WINNT40 Profiles username personal Windows Me Windows 98 or Windows 95 c Windows Profiles username My Documents If you are migrating the My Documents folder from a computer that has multiple users and you will want to use the same user names on the new computer you should create the user names on the new computer before beginning the migration Creating the user name on the new computer before the migration will cause the My Documents folder for that user to be created before the migration Then when the data files from the My Documents folder for that user on the old machine are migrated they will be placed properly in the My Documents folder on the new machine Creating a user name on the new machine after migrating the My Documents folder for that user from the previous machine may change the location of the files in My Documents You will be creating a My Documents folder for that user during the migration as well as when setting up the new user name Follow these instructions to perform th
23. the IP Address tab Select Obtain an IP Address automatically if not already selected Select Disable DNS Click OK and restart your computer NO as IP and DNS configuration setup for migrating from Windows 95 Before beginning the migration from Windows 95 to Windows XP you must specify an IP address and set the DNS settings for both your previous and new computer Follow the instructions in the section below for Windows XP new computer and Windows 95 previous computer Windows XP 1 Click Start then select Control Panel 2 Select Network and Internet Connections 3 Under the Pick a Control Panel Icon select Network Connections 4 Double click Local Area Connection and then select Internet protocol TCP IP Properties Installation and user s guide 1 51 5 Select Use the following IP address For the IP address type 192 168 1 1 and then type 255 255 255 0 for the Subnet mask Internet Protocol TCP IP Properties General You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically Use the following IP address IP address 192 168 1 1 Subnet mask 255 255 255 0 Default gateway Obtain DNS server address automatically Use the following DNS server addresses Preferred DNS server Alternate DNS server 6 Ensure the
24. the connection properties window will close Windows Me Windows 98 and Windows 95 PON Click Start point to Settings and then click Control Panel Double click Network On the Configuration tab click File and Print Sharing In the File and Print Sharing window de select I want to be able to give others access to my files and I want to be able to allow others to print to my printer s if they are not already unchecked Disabling a computer to log on to a Windows NT Domain If you are having trouble performing the data migration to Windows XP one or both of your computers may be set up to log on to a Windows NT domain Use the instructions below to check and correct this setting if necessary Windows Me Windows 98 and Windows 95 1 6 On the desktop right click on either Network Neighborhood Windows 95 or My Network Places Windows 98 or Windows Me On the menu click Properties In the top box of the Network window select Client for Microsoft Networks Click Properties Under Logon validation deselect Log on to Windows NT Domain if selected Click OK Click OK on the Network window Restart the computer if prompted Windows 2000 1 ron Click Start point to Settings and then click Control Panel On the Control Panel window double click on the System icon On the System Properties window select the Network identification tab Click Properties In the Member Of section on the Identification
25. the location of the file To do this click on Start and then select Search or Find depending on the operating system the option will be search or Find If your system will be connected to the internet you may want to disable File and Print Sharing to avoid letting other computers access your files For information on disabling File and Print Sharing see After the migration it is a good idea to keep the old machine available for a time period in case files were missed during the transfer process During the migration you may not have captured every file you meant to migrate Having these available on the old machine will allow you to perform the migration process again in case you discover files that were intended to be transferred but were not selected in the process After the migration you may want to change the screen resolution on your new computer A higher screen resolution reduces the size of items on your screen and makes the image sharper To change the screen resolution follow these instructions Windows 2000 Windows Me Windows 98 Windows 95 a Click Start gt Settings gt Control Panel b The Control Panel window opens Double click the Display icon c The Display Properties windows opens Click the Settings tab d In the Screen area or Display area section move the slider to the desired resolution and then click Apply If you are unable to move it to the right the resolution can not be set any higher
26. the one that represents the active network connection for your computer Click Install gt Protocol gt Add gt Microsoft gt NetBEUI protocol and then click OK Click Install gt Service gt Add gt File and Print Sharing for Microsoft Networks and then click OK Close the Local Area Connection Properties window Close the Network and Dial up Connections window Click here Al to exit this help window and to continue with the transfer process IBM Data Migration Kit User s Guide E Configure settings Configure your local area connection File and Print Sharing for Microsoft Networks is installed on your computer Make sure File and Print Sharing for Microsoft Networks is enabled and then install NetBIOS Extended User Interface NetBEUI protocol Do the following 1 Right click Local Area Connection and then click Properties If more than one Local Area Connection icon is available click the one that represents the active network connection for your computer Make sure the check box for File and Print Sharing for Microsoft Networks is selected Click Install gt Protocol gt Add gt Microsoft gt NetBEUI protocol and then click OK to install and enable the NetBEUI protocol Close the Local Area Connection Properties window Close the Network and Dial up Connections window Click here Al to exit this help window and to continue with the transfer process Windows 95 Windows 98 and Windows
27. to your new computer Choose the folders you want to transfer To select a folder type in the folder name below and click Add If you do not know the name click Browse to view folders Folder name C TestFolder 20 On the next window click Next a IBM Data Transfer x Transfer data to your new computer This program will capture your settings and files and copy them to your new computer To continue click Next 21 The program will begin the transfer This process could take a while depending on how much data is being transferred Let the process run and do not run other programs while it is processing 1 42 IBM Data Migration Kit User s Guide Note Your previous computer must have free hard space equal to the amount of data that will be transferred at one time If you want to transfer larger quantities of data you could perform several transfers To check hard drive free space double click the My Computer icon right click on the hard drive and select Properties The hard drive Properties window displays the amount of free space IBM Data Transfer 22 Once this part of the transfer process is complete a new window will display on the previous computer Click Finish This will restart your previous computer When the computer restarts disconnect the crossover Installation and user s guide 1 43 cable from the Ethernet port on the previous computer IBM Data Transfer 23 M
28. Changes window ensure Workgroup is selected Add a workgroup name if necessary If changes were made click OK on the Identification Changes window and you will be instructed to restart the computer Click OK and then restart the computer If no changes were made click Cancel on the Identification Changes window Click OK on the System Properties window to exit A 8 IBM Data Migration Kit User s Guide Windows XP 1 Click Start and then select My Computer 2 Under System Tasks select View System Information 3 4 Under Member Of ensure Workgroup is selected Add a workgroup name Select the Computer Name tab and click Change if needed Click OK Restart the computer if prompted or instructed Appendix A Troubleshooting hints and tips A 9 A 10 IBM Data Migration Kit User s Guide Appendix B Warranty information This section contains the warranty period for your product information about obtaining warranty service and support and the IBM Statement of Limited Warranty Warranty period Contact your place of purchase for warranty service information Some IBM Machines are eligible for on site warranty service depending on the country or region where service is performed Machine IBM Data Migration Kit Warranty period One year Service and support The following information describes the technical support that is available for your product during the warranty period or thr
29. DNS address settings are blank 7 Click OK and restart your computer Note If your current IP and DNS settings are different than what you will set them to in the instructions below copy down the current settings so you can replace them after the migration Windows 95 1 Click Start gt Settings gt Control Panel 2 Double click Network 3 The Network window opens On the Configuration tab in the Network window a box will display the installed network components Select TCP IP Intel pro 100 S Desktop Adapter if you installed the PCI Ethernet adapter or TCP IP Xircom Ethernet Adapter 10 100 if you installed the PC card Ethernet adapter 1 52 IBM Data Migration Kit User s Guide Note If you already have an Ethernet adapter installed in your old computer select the TCP IP component that corresponds to the existing Ethernet adapter Click Properties then select the IP address tab Select Specify an IP Address For the IP Address box type 192 168 1 2 then type 255 255 255 0 for the subnet mask TCP IP Properties 192 168 1 2 Installation and user s guide 1 53 6 Select the DNS configuration tab select disable DNS and then click OK TCP IP Properties 71x Bindings Advanced NetBIOS DNS ine Gateway WINS Configuration IP Address ce Enable DNS Host Doman NG Server Search lider E ea Hemove Donan sumir Search Wde Add Cancel 7
30. Folder Please select a program folder Ac A Administrati IBM Personal Communications mecalstiedi 10 In the InstallShield Wizard Complete window ensure the Start IBM Data Transfer now check box is selected and then click Finish The IBM Data Transfer Software should start automatically 1 32 IBM Data Migration Kit User s Guide InstallShield Wizard A InstallShield Wizard Complete The InstallShield Wizard has successfully installed IBM Data Transfer Click Finish to exit the wizard M Start IBM Data Transfer now 11 In the following window on the previous computer click Next IBM Data Transfer x Welcome to IBM Data Transfer Use Data Transfer to transfer pour familiar Windows desktop settings or data files from an old computer previous computer to your new computer Before beginning make sure all other programs are closed To continue click Next 12 In the Choose Transfer options window select previous computer and then select Transfer using a network connection Type in the computer name of the new computer you should have written this down from the Installation and user s guide 1 33 new computer and click Next IBM Data Transfer NEWCOMPUTER r PA 13 If not already installed network support will need to be added to your previous computer To check and add network support follow the instructions below underneath the operating system on your
31. IBM Data Migration Kat Users Guide OPTIONS by IBM Note Before using this information and the product it supports read the information in the Appendixes Second Edition February 2002 O Copyright International Business Machines Corporation 2002 All rights reserved US Government Users Restricted Rights Use duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp Safety Before installing this product read the Safety Information dui cha bel j Ga tz Antes de instalar este produto leia as Informa es de Seguran a ERAT LO TRATARE Safety Information 2448 Prije instalacije ovog produkta obavezno pro itajte Sigurnosne Upute P ed instalac tohoto produktu si p e t te p ru ku bezpe nostn ch instrukc L s sikkerhedsforskrifterne f r du installerer dette produkt Ennen kuin asennat t m n tuotteen lue turvaohjeet kohdasta Safety Information Avant d installer ce produit lisez les consignes de s curit Vor der Installation dieses Produkts die Sicherheitshinweise lesen Mpiv eykataotrjoete TO mpoidv aut LABAOTE Tic MANPO opies aop esia safety information MMVI MANN NX 1878 07 1319 190 397 ur A term k telep t se el tt olvassa el a Biztons gi el r sokat Prima di installare questo prodotto leggere le Informazioni sulla Sicurezza ARO ORT HERRE RRA lt ESM Maa aon AO ta GPS yeye Ilpen aa ce HHCTAJIMPA OBO MP
32. IBM Data Migration Kit User s Guide 12 13 14 15 option is for advanced users Files and Settings Transfer Wizard 7 What do you want to transfer What do you want to transfer C Settings only Files only Both files and settings J Let me select a custom list of files and settings when click Next for advanced users Based on your current selection the following items will be transferred Settings Accessibility Command Prompt settings Folder options Internet Explorer settings Microsoft Netmeeting Mouse and keyboard Network printer and drives Dutlook Express Regional settings Screen Saver selection The Files and Settings Transfer Wizard begins collecting the files and settings on your old computer On your new computer a password is displayed You will be prompted to enter that password on your old computer Go to your old computer and type in the password that is displayed on your new computer Click OK The Files and Settings Transfer Wizard finishes collecting the data When this is complete the Completing the Collection Phase window opens on your old computer Click Finish The files and settings you selected to transfer will now be transferred from your old computer to your new computer Installation and user s guide 1 61 16 On your new computer the Completing the Files and Settings Transfer Wizard window opens Click Finish Files and Se
33. IBM Machine in a Middle Eastern or African country you may obtain warranty service for that Machine from the IBM entity within the country of purchase if that IBM entity provides warranty service in that country or from an IBM reseller approved by IBM to perform warranty service on that Machine in that country Warranty service in Africa is available within 50 kilometers of an IBM authorized service provider You are responsible for transportation costs for Machines located outside 50 kilometers of an IBM authorized service provider Governing Law The applicable laws that govern interpret and enforce rights duties and obligations of each of us arising from or relating in any manner to the subject matter of this Statement without regard to conflict of laws principles as well as Country unique terms and competent court for this Statement are those of the country in which the warranty service is being provided except that in 1 Albania Bosnia Herzegovina Bulgaria Croatia Hungary Former Yugoslav Republic of Macedonia Romania Slovakia Slovenia Armenia Azerbaijan Belarus Georgia Kazakhstan Kyrgyzstan Moldova Russia Tajikistan Turkmenistan Ukraine and Uzbekistan the laws of Austria apply 2 Estonia Latvia and Lithuania the laws of Finland apply 3 Algeria Benin Burkina Faso Cameroon Cape Verde Central African Republic Chad Congo Djibouti Democratic Republic of Congo Equatorial Guinea France Gabon Gambia Gu
34. M drive in your previous computer and the Windows XP operating system CD Before beginning the data migration follow these logon steps e Logon to your new computer with a name that is part of the Administrators group Installation and user s guide 1 49 If the previous computer is running Windows XP or Windows 2000 logon to your previous computer with a user name that is part of the Administrators group e For more information on logging on to your computer see Supplemental instructions on page A 3 To perform the migration to Windows XP you will first need to setup your IP and DNS settings on your previous and new computer to enable a connection between the two computers Refer to the instructions below in IP and DNS Configuration Setup IP and DNS configuration setup If you are migrating from Windows 95 to Windows XP g g proceed to DNS configuration setup for migrating from Windows 95 on page 1 51 Before beginning the migration from Windows XP Windows 2000 Windows Me or Windows 98 you must enable automatic IP and DNS configuration on both your previous and new computers Refer to the appropriate operating system to configure your IP and DNS settings for both computers Then proceed to Beginning the data migration to Windows XP from all supported operating systems on page 1 54 Note If your current IP and DNS settings are different than what you will set them to in the instructions below write dow
35. Me a If network support needs to be installed on your new computer you will see the following window open Note If you do not see this window proceed to step 18 Network support is already installed IBM Data Transfer 7 Network support will be installed now Your system will reboot automatically when complete Do you wish to continue b Click Yes and network support will be installed Click Yes to restart the computer when prompted Installation and user s guide 1 25 Note When Windows is installing network support you might be prompted to insert your operating system disk If so insert the operating system disk and click OK Note When Windows is installing network support you might see several version conflict windows If any of these windows open click OK on each window to keep the existing file c When Windows restarts this window opens Click Next Proceed to step 18 5 IBM Data Transfer Lx Transfer data to your new computer Before continuing please read You hawe chosen to transfer data using a local area network Network settings Windows desktop settings Folder contents To continue click Next 18 A window will open that displays the name of the new computer Write down the name exactly as shown You will be prompted for it on the 1 26 IBM Data Migration Kit User s Guide previous computer setup Click OK 2 IBM Data Transfer xl Transfer data to your ne
36. OYKT IpowtajTe nupopmMannjaTta 3a Ge36eMHOCT Lees voordat u dit product installeert eerst de veiligheidsvoorschriften Les sikkerhetsinformasjonen Safety Information fer du installerer dette produktet Przed zainstalowaniem tego produktu nale y zapozna sie z ksi k Informacje dotycz ce bezpiecze stwa Safety Information Copyright IBM Corp 2002 iii Antes de instalar este produto leia as Informa es sobre Seguran a MepeA ycraHoBko MpoAykTa MpO4TUTe UHCTPYKUUN NO TexHuke Oe3onacHocTH Pred in tal ciou tohto zariadenia si pecitaje Bezpe nostn predpisy Pred namestitvijo tega proizvoda preberite Varnostne informacije Antes de instalar este producto lea la informaci n de seguridad L s s kerhetsinformationen innan du installerar den h r produkten Za AAA RARR oe iv IBM Data Migration Kit User s Guide Contents Safety 6 cs 0 e ais sas a a TT About this book nn VET Registering your option s e i s ome p w e n y o y a V Installation and user s guide 2 2 2 2 ew ee 11 Product description ee es kh ee el Supported operating system combinations ee System requirements o 2 so s s nn 12 The data migration process 2 2 so nn nn wor e s s t3 Installing the hardware o 14 Installing the Ethernet adapter i ina a desktop computer PCI Kit o 14 Installing the Ethernet adapter in device drivers in a desktop computer 1 5 Installing t
37. Settings Transfer Wizard is complete Proceed to Suggestions after migration for tips after the migration is completed Suggestions after migration Read through the suggestions in this section for some tips to follow after the data migration process is complete 1 If you purchased the PCI kit for a desktop computer or PC Card Kit for a mobile computer you may want to reuse the Ethernet card contained in the kit to set up a network between your old computer and the new computer If you transferred the network settings from your old computer to your 1 70 IBM Data Migration Kit User s Guide new computer and want to connect both computers to the same network you may need to change the computer name of one of the computers they cannot have the same name if you want them to connect to each other For additional information on changing a computer name on a Windows machine refer to Supplemental instructions on page A 3 Many documents are saved to the My Documents folder by default If you have created more than one user on your previous computer there may be more than one folder called My Documents Check the following directories to make sure that all of your files are transferred items in italics may vary c Documents and settings username My Documents c WINNT40 Profiles username personal c Windows Profiles username My Documents If you are unable to locate a file on the new computer perform a search for
38. When warranty service involves the exchange of a Machine or part the item IBM or your reseller replaces becomes its property and the replacement becomes yours You represent that all removed items are genuine and unaltered The replacement may not be new but will be in good working order and at least functionally equivalent to the item replaced The replacement B 4 IBM Data Migration Kit User s Guide assumes the warranty service status of the replaced item Many features conversions or upgrades involve the removal of parts and their return to IBM A part that replaces a removed part will assume the warranty service status of the removed part Before IBM or your reseller exchanges a Machine or part you agree to remove all features parts options alterations and attachments not under warranty service You also agree to 1 ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange 2 obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own and 3 where applicable before service is provided a follow the problem determination problem analysis and service request procedures that IBM or your reseller provides b secure all programs data and funds contained in a Machine c provide IBM or your reseller with sufficient free and safe access to your facilities to permit them to fulfill their obligations and d inform IBM or your reseller of changes
39. a blank formatted diskette into the diskette drive on your new computer and click Next The Wizard disk is created The Now go to your old computer window opens Do not click Next Move to the previous computer and insert the Wizard disk into the Installation and user s guide 1 57 1 58 diskette drive Files and Settings Transfer Wizard Now go to your old computer To collect files and settings 1 Goto your old computer and insert the Wizard Disk into the disk drive 2 On the old computer click Start and then click Run 3 Type a FASTWiz and then click OK A Alter you collect the files and settings from your old computer return here and then click Next Dr if you are using the direct cable method to transfer files and settings click Next to go to the following page and select Direct cable MTI On your previous computer click Start and select Run Type a fastwiz and then click OK The Files and Settings Transfer Wizard opens Files from your Wizard disk are now being copied to your computer IBM Data Migration Kit User s Guide 9 On your previous computer the Welcome to the Files and Settings Transfer Wizard window opens Click Next Files and Settings Transfer Wizard Welcome to the Files and Settings Transfer Wizard EA E In this part of the wizard you will collect the files and settings you want to transfer Before you continue close any other programs that are currently runn
40. able for a fee at IBM s discretion 90 days after the option has been withdrawn from marketing Additional support offerings including step by step installation assistance are available for a nominal fee To assist the technical support representative have available as much of the following information as possible e Option name e Option number e Proof of purchase Computer manufacturer model serial number if IBM and manual e Exact wording of the error message if any e Description of the problem e Hardware and software configuration information for your system If possible be at your computer Your technical support representative might want to walk you through the problem during the call For the support telephone number and support hours by country refer to the following table If the number for your country or region is not listed contact your IBM reseller or IBM marketing representative Response time may vary depending on the number and nature of the calls received Support 24 hours a day 7 days a week Canada Toronto only 416 383 3344 Canada all other 1 800 565 3344 U S A and Puerto Rico 1 800 772 2227 All other countries and regions Go to http www ibm com pc support and click Support Phone List B 2 IBM Data Migration Kit User s Guide IBM Statement of Limited Warranty Z125 4753 06 8 2000 This warranty statement consists of two parts Part 1 and Part 2 Be sure to
41. arbitrator shall be the sole arbitrator provided that the arbitrator was validly and properly appointed The English language version of this Agreement prevails over any other language version HONG KONG AND MACAU Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of Hong Kong Special Administrative Region INDIA Limitation of Liability The following replaces items 1 and 2 of this Section 1 liability for bodily injury including death or damage to real property and tangible personal property will be limited to that caused by IBM s negligence 2 as to any other actual damage arising in any situation involving nonperformance by IBM pursuant to or in any way related to the subject of this Statement of Limited Warranty IBM s liability will be limited to the charge paid by you for the individual Machine that is the subject of the claim JAPAN Governing Law The following sentence is added to this Section Any doubts concerning this Agreement will be initially resolved between us in good faith and in accordance with the principle of mutual trust NEW ZEALAND The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Consumer Guarantees Act 1993 or other legislation which cannot be excluded or limited The Consumer Guarantees Act 1993 will
42. c register IBM will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information O Copyright IBM Corp 2002 vii viii IBM Data Migration Kit User s Guide Installation and user s guide This guide contains the product description hardware and software installation instructions and product use information Note Check the IBM Support Web site for additional tips on using this option at http www ibm com pc support Product description The IBM Data Migration Kit provides an easy way to copy Microsoft Windows desktop settings network settings Internet bookmarks and data files from a previous computer to a new computer For migrating to Microsoft Windows 95 Windows 98 Microsoft Windows Millennium Edition Me or Microsoft Windows 2000 Professional the migration process is managed by the IBM Data Transfer Software program This program is available on the CD that comes with your kit For migrating to Windows XP the migration is managed by the Files and Settings Transfer Wizard which comes with the Windows XP operating system The data and settings will be transferred from the previous computer using an Ethernet connection between the two computers In addition to the IBM Data Migration User s Guide and Software CD the option package includes e IBM Data Migration Kit User s Guide e Safety Information book
43. e Konformit tserkl rung nach Paragraph 5 des EMVG ist die IBM Deutschland Informationssysteme GmbH 70548 Stuttgart Informationen in Hinsicht EMVG Paragraph 3 Abs 2 2 Das Ger t erf llt die Schutzanforderungen nach EN 50082 1 und EN 55022 Klasse B EN 50082 1 Hinweis Wird dieses Ger t in einer industriellen Umgebung betrieben wie in EN 50082 2 festgetlegt dann kann es dabei eventuell gest rt werden In solch einem FA11 ist der Abstand bzw die Abschirmungzu der industriellen St rquelle zu vergr fern Anmerkung Appendix C Notices C 3 Um die Einhaltung des EMVG sicherzustellen sind die Ger te wie in den IBM Handbiichern angegeben zu installieren und zu betreiben European Union emission directive This product is in conformity with the protection requirements of EU Council Directive 89 366 ECC on the approximation of the laws of the Member States relating to electromagnetic compatibility IBM can not accept responsibility for any failure to satisfy the protection requirements resulting from a non recommended modification of the product including the fitting of non IBM option cards This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to European Standard EN 55022 The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communicat
44. e data migration Note You might need the original diskettes or CD that came with your 1 operating system If your new computer is running Windows 2000 log on to your new computer with a user name that is part of the Administrators group Note For information on logging on to Windows and checking whether a user name is part of the Administrators group see Insert the IBM Data Migration User s Guide and Somn CD into the CD ROM or DVD drive in your new computer If your browser window does not automatically open click Start gt Run and type e launch htm where e is the CD ROM or DVD drive Select or click your language on the language browser page On the left side of the browser page click Install IBM Data Transfer Application to start the automated InstallShield program for IBM Data Transfer Installation and user s guide 1 13 5 The InstallShield Wizard window opens Click Next Es IBM Data Transfer InstallShield Wizard Welcome to the InstallShield Wizard for IBM Data Transfer The InstallShield Wizard T M will help install IBM Data Transfer on pour computer To continue click Nest 6 In the Setup Configuration window select New Computer and click Next InstallShield Wizard Setup Configuration Please answer the following question Which computer is this gt New The computer to which you are transferring data computer Previous The computer from which you are transferr
45. e first sentence laws in the Province of Ontario UNITED STATES B 6 IBM Data Migration Kit User s Guide Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of the State of New York ASIA PACIFIC AUSTRALIA The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other similar legislation and are only limited to the extent permitted by the applicable legislation Limitation of Liability The following is added to this Section Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974 or other similar legislation IBM s liability is limited to the repair or replacement of the goods or the supply of equivalent goods Where that condition or warranty relates to right to sell quiet possession or clear title or the goods are of a kind ordinarily acquired for personal domestic or household use or consumption then none of the limitations in this paragraph apply Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of the State or Territory CAMBODIA LAOS AND VIETNAM Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of the State of New York
46. e to install the Ethernet PC Card adapter that comes with the PC Card Kit 1 Connect the converter cable to the Ethernet PC card adapter as shown in the following illustration NOaPOoOND 2 Turn on your computer if it is not already on and wait for Windows to start Installation and user s guide 1 9 3 Insert the Ethernet PC Card into an available PC Card slot in your mobile computer as shown in the following illustration If you are unsure about the location of the PC Card slot refer to your mobile computer documentation Installing the Ethernet PC Card adapter device drivers in a mobile computer If your previous computer is running Windows XP Windows 2000 Windows Me or Windows 98 SE the Ethernet PC Card will automatically be recognized and the device drivers will be installed when you start the operating system If prompted restart the computer Proceed to Connecting the computers on page 1 11 e 1 11 Note The New Network Device Installed window might open Windows XP only Close this window If your previous computer is running Windows 98 or Windows 95 follow the instructions for your operating system Windows 98 Follow this procedure to install the Ethernet PC Card adapter device drivers in Windows 98 1 Ifitis not already running start Windows 98 The Add New Hardware wizard window opens 2 Insert the IBM Data Migration User s Guide and Software CD in the CD ROM drive if itis
47. er Operating System Previous Computer Operating System Logon Requirements Windows XP Windows XP Windows You must log on to both 2000 machines with a user name that is part of the Administrators group Windows XP Windows Me Windows 98 You must log on to the new Windows 95 machine with a user name that is part of the Administrators group You do not have to log on to the previous computer Windows 2000 Windows 2000 You must logon to your new and previous computer with the same user name and password to perform the transfer process That user name must be part of the Administrators group on both machines Windows 2000 Windows 95 98 or Me Windows 95 98 or Me Windows 95 98 or Me You must logon to your new and previous computer with the same user name and password to perform the transfer process That user name must be part of the Administrators group on the new machine You do not have to logon to Windows on either machine to perform the transfer process O Copyright IBM Corp 2002 A 1 For information on logging on to Windows changing user passwords and verifying whether a user name is part of the Administrators group see Supplemental instructions on page A 3 Note Not all operating system combinations are supported See the Supported operating system combinations section at the beginning of this manual to verify that your combination is supported
48. ercent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim The following item is added to this paragraph 3 breach of IBM s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982 Applicability of suppliers and resellers unchanged The following is added to the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default shall be limited to damages Appendix B Warranty information B 13 B 14 IBM Data Migration Kit User s Guide Appendix C Notices This section contains information on notices Any references in this publication to non IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk Any performance data contained herein was determined in a controlled environment Therefore the result obtained in other operating environments may vary significantly Some measurements may have been made on development level systems and there is no guarantee that these measurements will be the same on generally available systems Furthermore some measurements may have been estimated through extrapolation Actual results
49. ff User where User is the user name you are currently logged on as Click OK 3 The Log On Windows box will open requesting a user name and password In the User name box enter a user name that is part of the Administrators group and the password of that user in the password box Click OK 4 Windows will log you on as that user name Checking whether a user name is part of the Administrators group in Windows 2000 1 Click Start point to Settings and then click Control Panel 2 In the Control Panel double click Users and Passwords 3 On the Users tab under Users for this computer locate your user name that you know the password for Check whether Administrators is listed under the Group section for that user name If so that user is part of the Administrators group If you are not already logged on as that user follow the instructions above under Logging on to Windows 2000 with a use name that is part of the Administrators group If there are no user names A 4 IBM Data Migration Kit User s Guide that you know the password for and that are part of the Administrators group contact your administrator to either get the Administrator user name password or to have your user name added to the Administrators group Windows Me and Windows 98 1 Click Start then Log Off user where user is the user name you are currently logged in with you may not be logged on as any user 2 The Log Off Windows dialog box dis
50. fications The following paragraphs are added to this Section The minimum warranty period for Machines is six months In case IBM or your reseller is unable to repair an IBM Machine you can alternatively ask for a partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine and get your money refunded Extent of Warranty The second paragraph does not apply Warranty Service The following is added to this Section During the warranty period transportation for delivery of the failing Machine to IBM will be at IBM s expense Limitation of Liability The following paragraph is added to this Section The limitations and exclusions specified in the Statement of Limited Warranty will not apply to damages caused by IBM with fraud or gross negligence and for express warranty The following sentence is added to the end of item 2 IBM s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negligence EGYPT Limitation of Liability The following replaces item 2 in this Section as to any other actual direct damages IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim For purposes of this item the term Machine includes Machine Code and Licensed Internal Code Applicability of suppliers and resellers unchanged FRANCE Limita
51. ge 1 11 e If you are installing the Ethernet adapter in a desktop computer follow the instructions beginning in the next section Installing the Ethernet adapter in a desktop computer PCI Kit If you are installing the Ethernet adapter in a mobile computer proceed to Installing the Ethernet adapter in a mobile computer PC Card Kit on page 1 9 Installing the Ethernet adapter in a desktop computer PCI Kit Follow these steps to install the PCI adapter from the PCI Kit only in your previous computer 1 Shut down Windows if it is running by clicking the Start button and then click Shut Down 2 Turn off and unplug the computer from the electrical outlet before removing the computer cover Note Follow the instructions provided in your computer manual for removing the cover or otherwise accessing the PCI adapter slots and installing a PCI adapter Be sure to follow any safety instructions in that manual 1 4 IBM Data Migration Kit User s Guide 3 Remove the cover bracket from a PCI slot by removing the screw that secures it gt Insert the PCI Ethernet adapter into a PCI slot as shown in the illustration and push it into the slot until it is firmly seated Secure the adapter bracket with the screw that you removed in step 3 Your adapter slots or PCI connector might differ from the illustration 5 Replace the computer cover 6 Plug in the power cord 7 Turn on the power 8 Follow the
52. gn Arbitral Awards 1958 The arbitration fee will be borne by the losing party unless otherwise determined by the arbitral award During the course of arbitration this Agreement will continue to be performed except for the part which the parties are disputing and which is undergoing arbitration EUROPE MIDDLE EAST AFRICA EMEA THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES The terms of this Statement of Limited Warranty apply to Machines purchased from IBM or an IBM reseller Warranty Service If you purchase an IBM Machine in Austria Belgium Denmark Estonia Finland France Germany Greece Iceland Ireland Italy Latvia Lithuania Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland or United Kingdom you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM If you purchase an IBM Personal Computer Machine in Albania Armenia Belarus Bosnia and Herzegovina Bulgaria Croatia Czech Republic Georgia Hungary Kazakhstan Kirghizia Federal Republic of Appendix B Warranty information B 9 Yugoslavia Former Yugoslav Republic of Macedonia FYROM Moldova Poland Romania Russia Slovak Republic Slovenia or Ukraine you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM If you purchase an
53. h instance unless otherwise provided by mandatory law IBM is liable for no more than 1 unchanged 2 as to any other actual damage arising in all situations involving nonperformance by IBM pursuant to or in any way related to the subject matter of this Statement of Warranty IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim Applicability of suppliers and resellers unchanged The following replaces the third paragraph of this Section Unless otherwise provided by mandatory law IBM and your reseller are not liable for any of the following items 1 and 2 unchanged 3 indirect damages even if IBM or your reseller is informed of their possibility SOUTH AFRICA NAMIBIA BOTSWANA LESOTHO AND SWAZILAND Limitation of Liability The following is added to this Section IBM s entire liability to you for actual damages arising in all situations involving nonperformance by IBM in respect of the subject matter of this Statement of Warranty will be limited to the charge paid by you for the individual Machine that is the subject of your claim from IBM UNITED KINGDOM B 12 IBM Data Migration Kit User s Guide Limitation of Liability The following replaces items 1 and 2 of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence 2 the amount of any other actual direct damages or loss up to 125 p
54. he Ethernet adapter in a mobile computer PC Card Kit 1 9 Installing the Ethernet PC Card adapter device drivers in a mobile computer 2 a de Ga oe ee bk Oke we a a DDO Connecting the computers lt s s s 2 1 nen 111 Migrating data 1 12 Migrating data to a computer running Windows 2000 Windows Me Windows 98 or Windows 5 oe wed we E A Migrating data to a computer running Windows xP Lo mes a a 1 49 Suggestions after migration 2 nn 1 70 Appendix A m hints and tips 22 2 AA Troubleshooting a ee OS a ny Gk A e te Aal Supplemental instructions eo ke ae AS Logging on to your Windows computer with a user name sand password 2 0 AB Changing a user name password on your Windows computer A 5 Changing the name of a Windows computer Ab Windows XP nn ee ee A 6 Windows 2000 nenn ALT Windows Me Windows 98 and Windows 95 Der w ee AZ Disabling file and print eS oa ee ee ee A7 Windows XP be bg Be me BR A eo te Ge we AE Windows 2000 Baw os amp ow ce ce ee Windows Me Windows 98 ond Windows 95 Bean ce a a om lt n ASB Disabling a computer to log on toa Windows NT Domain A 8 Appendix B Warranty information 2 2 BA Warranty period 2 2 2 2 ee ee ee ee Bl Service and support Bree Be we a vee Do Ge a Bel Warranty information on the World Wide Web zo moo oao an a de a Bel Copyright
55. her passwords at the same time as your Windows password click OK In the Change Windows Password window enter in the old password and the new password and confirm the new password Click OK A window will open indicating the password was successfully changed Click OK Click Close on the Password Properties window Changing the name of a Windows computer To perform the data migration successfully your new and previous computers cannot have the same computer name To change the name of a computer see the following instructions Windows XP Ohe RO Ne Click Start then select My Computer Select View System Info under System Tasks Select the Computer Name tab Click Change then type in a different name Click OK A 6 IBM Data Migration Kit User s Guide Windows 2000 oa Fon Click Start point to Settings and then click Control Panel On the Control Panel window double click on the System icon In the System Properties window click on the Network Identification tab On the Network Identification tab click the Properties button In Computer Name box type a new name for the computer Click OK The Network Identification window opens and indicates the computer must be restarted Click OK and the computer will restart Windows Me Windows 98 and Windows 95 Fon gt Click Start point to Settings and then click Control Panel On the Control Panel window double click on the Network icon In the Network wi
56. hine the contents of the Pictures folder from your previous machine will be added to the contents of the Pictures folders on your new machine Since this kit is meant to be used to transfer data to a brand new IBM computer you should not have any data files already on the new computer that would be overwritten by data files from your previous machine Note You will be prompted to choose which folders you want to transfer later in step 17 in Installing and running the IBM data transfer software on the previous computer IBM Data Transfer Any folders or files on this computer with the same folder name or file name on the previous computer will be replaced with the files from the previous computer IBM Data Migration Kit User s Guide 14 Click Next after you have made your selections IBM Data Transfer x Choose transfer options What do pou want to transfer V Windows desktop settings Properties for your display and Internet Explorer browser settings including your bookmarks I Network settings Properties for your network adapter protocols and services Enables you to transfer folders that pou will specify on the previous computer All Ss subfolders and files will also be copied te 15 In the next window select Across a network connection Click Next IBM Data Transfer Lx Choose transfer options How do you want to transfer your data C Use removable disks
57. ilable from IBM authorized dealers IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment Unauthorized changes or modifications could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation C 2 IBM Data Migration Kit User s Guide Responsible party International Business Machines Corporation New Orchard Road Armonk NY 10504 Telephone 1 919 543 2193 Tested To Comply C With FCC Standards FOR HOME OR OFFICE USE Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES 003 Avis de conformite a la reglementation d Industrie Canada Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada Deutsche EMV Direktive electromagnetische Vertr glichkeit Zulassungbescheinigunglaut dem Deutschen Gesetz ber die elektromagnetische Vertr glichkeit von Ger ten EMVG vom 30 August 1995 bzw der EMC EG Richtlinie 89 336 Dieses Ger t ist berechtigt in bereinstimmungmit dem Deutschen EMVG das EG Konformit tszeichen CE zu f hren Verantwortlich f r di
58. in a Machine s location IBM is responsible for loss of or damage to your Machine while it is 1 in IBM s possession or 2 in transit in those cases where IBM is responsible for the transportation charges Neither IBM nor your reseller is responsible for any of your confidential proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason You should remove all such information from the Machine prior to its return Limitation of Liability Circumstances may arise where because of a default on IBM s part or other liability you are entitled to recover damages from IBM In each such instance regardless of the basis on which you are entitled to claim damages from IBM including fundamental breach negligence misrepresentation or other contract or tort claim except for any liability that cannot be waived or limited by applicable laws IBM is liable for no more than 1 damages for bodily injury including death and damage to real property and tangible personal property and 2 the amount of any other actual direct damages up to the charges if recurring 12 months charges apply for the Machine that is subject of the claim For purposes of this item the term Machine includes Machine Code and Licensed Internal Code Appendix B Warranty information B 5 This limit also applies to IBM s suppliers and your reseller It is the maximum for which IBM its suppliers a
59. inea Guinea Bissau Ivory Coast Lebanon Mali Mauritania Morocco Niger Senegal Togo and Tunisia this Agreement will be construed and the legal relations between the parties will be determined in accordance with the French laws and all disputes arising out of this Agreement or related to its violation or execution including summary proceedings will be settled exclusively by the Commercial Court of Paris 4 Angola Bahrain Botswana Burundi Egypt Eritrea Ethiopia Ghana Jordan Kenya Kuwait Liberia Malawi Malta Mozambique Nigeria Oman Pakistan Qatar Rwanda Sao Tome Saudi Arabia Sierra Leone Somalia Tanzania Uganda United Arab Emirates United Kingdom West Bank Gaza Yemen Zambia and Zimbabwe this Agreement will be governed by English Law and disputes relating to it will be submitted to the exclusive jurisdiction of the English courts and 5 in Greece Israel Italy Portugal and Spain any legal claim arising out of this Statement will be brought before and finally settled by the competent court of Athens Tel Aviv Milan Lisbon and Madrid respectively THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED B 10 IBM Data Migration Kit User s Guide AUSTRIA AND GERMANY The IBM Warranty for Machines The following replaces the first sentence of the first paragraph of this Section The warranty for an IBM Machine covers the functionality of the Machine for its normal use and the Machine s conformity to its Speci
60. ing data computer InstallShield lt Back Cancel 1 14 IBM Data Migration Kit User s Guide 7 In the Setup Configuration window select I already have the IBM Data Transfer program installed and click Next InstallShield Wizard Setup Configuration How would you like to install the IBM Data Transfer Program on the previous computer InstallShield Installation and user s guide 1 15 8 In the Choose Destination Location window accept the default folder and click Next InstallShield Wizard Choose Destination Location Select folder where Setup will install files Taceallieicle 1 16 IBM Data Migration Kit User s Guide 9 In the Select Program Folder window accept the default folder and click Next The program is then installed on your computer InstallShield Wizard Select Program Folder Please select a program folder Administrative Tools Common Adobe Adobe Acrobat Adobe Acrobat 4 0 IBM Personal Communications IMtalselal 10 In the InstallShield Wizard Complete window ensure that the Start IBM Data Transfer now check box is selected then click Finish The IBM Data Transfer software starts automatically Installation and user s guide 1 17 InstallShield Wizard InstallShield Wizard Complete The InstallShield Wizard has successfully installed IBM Data Transfer Click Finish to exit the wizard M Start IBM Data Transfer now 11 In the foll
61. ing on your computer To continue click Next Cancel 10 At the next window select Home or small office network and then click Next Note If the Home or small office network selection is not available as an option then your computers cannot connect Refer to Installation and user s guide 1 59 11 1 60 Troubleshooting on page A 1 for ideas on how to fix the problem Files and Settings Transfer Wizard Select a transfer method Direct cable a cable that connects your computers serial ports rr A network is the best way to transfer large amounts of data Floppy drive or other removable media Make sure both computers have the same type of drive d 3 Floppy 4 Other for example a removable drive or network drive You can save files and settings to any disk drive or folder on your computer Folder or drive At the next window select the items you want to transfer Click Next In this illustration the transfer Both files and settings option is selected Note If you select Settings only then all default settings will be migrated If you select Files only then all files of the default file types will be transferred If you select Both Files and Settings then all default settings and default file types will be transferred To customize which settings and files are transferred select Let me select a custom list of files and settings when I click Next This
62. instructions in the next section to install the device drivers Installing the Ethernet adapter in device drivers in a desktop computer Follow the instructions for the operating system on your previous computer to install the device drivers for the PCI Ethernet adapter Device drivers are necessary for the PCI Ethernet adapter to function Windows might prompt for the device driver installation disk on restart Windows XP Windows XP will automatically install the device drivers for your PCI Ethernet adapter A New Network Device Installed window opens Close this window Windows 2000 Follow this procedure to install the Ethernet device drivers in Windows 2000 1 After you install the Ethernet adapter in the computer plug in the power cord and start the computer The Found New Hardware window opens and the Found New Hardware wizard starts Installation and user s guide 1 5 2 Insert the IBM Data Migration User s Guide and Software CD into the CD ROM drive if it is not already inserted If a browser window automatically opens close the window 3 In the New Hardware Wizard Welcome window click Next 4 In the next window click Search then click Next 5 Select the CD ROM check box in the Locate Driver window and click Next 6 When the Search Results indicates a device driver was found on the CD click Next to continue 7 Ifa Digital Signature message is displayed click Yes to continue 8 When a completion message
63. ion devices Union Europ enne Directive Conformit lectromagn tique Ce produit est conforme aux exigences de protection de la Directive 89 336 EEC du Conseil de l UE sur le rapprochement des lois des Etats membres en mati re de compatibilit lectromagn tique IBM ne peut accepter aucune responsabilit pour le manquement aux exigences de protection r sultant d une modification non recommand e du produit y compris l installation de cartes autres que les cartes IBM Ce produit a t test et il satisfait les conditions de l quipement informatique de Classe B en vertu de Standard europ en EN 55022 Les conditions pour l quipement de Classe B ont t d finies en fonction d un contexte r sidentiel ordinaire afin de fournir une protection raisonnable contre l interf rence d appareils de communication autoris s Unione Europea Directiva EMC Conformidad lectromagn tica Este producto satisface los requisitos de protecci n del Consejo de la UE Directiva 89 336 CEE en lo que a la legislatura de los Estados Miembros sobre compatibilidad electromagn tica se refiere IBM no puede aceptar responsabilidad alguna si este producto deja de satisfacer dichos requisitos de protecci n como resultado de una modificaci n no recomendada del producto incluyendo el ajuste de tarjetas de opci n que no sean IBM C 4 IBM Data Migration Kit User s Guide Este producto ha sido probado y satisface los l mites para Equipos Inf
64. is displayed click Finish 9 Proceed to Connecting the computers on page 1 11 Windows Me Follow this procedure to install the Ethernet device drivers in Windows Me 1 After you install the adapter in the computer start the computer Windows Me detects the adapter and the Add New Hardware wizard starts 2 Click Next Note If the Add New Hardware window does not open and Windows Me starts normally you might need to manually add the device drivers using instructions given in Manually adding the Ethernet device drivers with Windows Me 3 Click Removable Media and insert the IBM Data Migration User s Guide and Software CD into the CD ROM drive if it is not already inserted If the CD browser window opens after you insert the CD close that window 4 Click Updated Driver and then click Next 5 When the files have been copied click Finish and restart your computer when prompted 6 Proceed to Connecting the computers on page 1 11 Manually adding the Ethernet device drivers with Windows Me If the Add New Hardware Wizard window does not open in step 1 of the previous procedure check the Device Manager list to see if the new adapter is present If it is not follow these instructions to manually add the adapter 1 Click Start gt Settings gt Control Panel From the Control Panel double click the Add New hardware icon Click Specify the location of the driver then click Next Click Display a li
65. may vary Users of this document should verify the applicable data for their specific environment Processing date data This IBM hardware product and IBM software products that might be packaged with it have been designed when used in accordance with their associated documentation to process date data correctly within and between the 20th and 21st centuries provided all other products for example software hardware and firmware used with these products properly exchange accurate date data with them IBM cannot take responsibility for the date data processing capabilities of non IBM products even if those products are preinstalled or otherwise distributed by IBM You should contact the vendors responsible for those products directly to determine the capabilities of their products and update them if needed This IBM hardware product cannot prevent errors that might occur if software upgrades or peripheral devices you use or exchange data with do not process date data correctly The foregoing is a Year 2000 Readiness Disclosure Trademarks The following terms are trademarks of the IBM Corporation in the United States or other countries or both IBM HelpCenter O Copyright IBM Corp 2002 C 1 Microsoft and Windows are trademarks of Microsoft Corporation in the United States other countries or both Windows XP screen shots reprinted by permission from Microsoft Corporation Intel is a trademark of the Intel Corporation i
66. n the United States other countries or both Other company product and service names may be trademarks or service marks of others Electronic emission notices IBM Data Migration Kit Federal Communications Commission FCC statement Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult an IBM authorized dealer or service representative for help Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits Proper cables and connectors are ava
67. n the current settings so that you can replace them after the migration Windows XP 1 Click Start gt Control Panel gt Network and Internet Connections 2 Select Network Connections under pick a Control panel icon 3 Double click Local Area Connection and select Internet Protocol TCP IP Properties 4 Ensure a Obtain an IP address automatically and Obtain DNS server automatically are selected Windows 2000 Click Start gt Settings gt Control Panel Double click Network and Dial Up Connections Double click Local Area Connection Select Internet Protocol TCP IP then click Properties Select Obtain an IP Address automatically if not already selected Select Obtain a DNS address automatically if not already selected NogpON gt Click OK then restart our computer 1 50 IBM Data Migration Kit User s Guide Windows Me and Windows 98 1 Click Start gt Settings gt Control Panel 2 Double click Network 3 The Network window opens On the Configuration tab in the Network window a box will display the installed network components Select TCP IP Intel pro 100 S Desktop Adapter if you installed the PCI Ethernet adapter or TCP IP Xircom Ethernet Adapter 10 100 if you installed the PC card Ethernet adapter Note If you already have an Ethernet adapter installed in your old computer select the TCP IP component that corresponds to the existing Ethernet adapter Click Properties then select
68. nd your reseller are collectively responsible UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE 2 LOSS OF OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES LOST PROFITS OR LOST SAVINGS EVEN IF IBM ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU Governing Law Both you and IBM consent to the application of the laws of the country in which you acquired the Machine to govern interpret and enforce all of your and IBM s rights duties and obligations arising from or relating in any manner to the subject matter of this Agreement without regard to conflict of law principles Part 2 Country unique Terms AMERICAS BRAZIL Governing Law The following is added after the first sentence Any litigation arising from this Agreement will be settled exclusively by the court of Rio de Janeiro NORTH AMERICA Warranty Service The following is added to this Section To obtain warranty service from IBM in Canada or the United States call 1 800 IBM SERV 426 7378 CANADA Governing Law The following replaces laws of the country in which you acquired the Machine in th
69. ndow click the Identification tab In the Computer name box on the Identification tab type in a new name for the computer Click OK The System Settings Change window opens and prompts you to restart your computer Click Yes and the computer will restart Disabling file and print sharing The File and Printer Sharing for Microsoft Networks component allows other computers on a network to access resources on your computer by using a Microsoft network When you complete the data migration process it is a good idea to disable file and print sharing on both computers To do this follow the procedures below Windows XP upon 6 Click Start then select Control Panel Select Network and Internet Connections Select Network Connections under Pick a Control Panel icon Double click Local Area Connection Click Properties and de select File and Print Sharing for Microsoft Networks Click OK Windows 2000 1 Click Start point to Settings and then click Network and Dial up Connections The Network and Dial up Connections window will open Right click the connection for the Local Area Connection for the ethernet adapter you are using and then click Properties Appendix A Troubleshooting hints and tips A 7 4 In the box underneath Components checked are used by this connection on the connection properties window de select File and Printer Sharing for Microsoft Networks if not already unchecked Click OK and
70. not apply in respect of any goods which IBM provides if you require the goods for the purposes of a business as defined in that Act B 8 IBM Data Migration Kit User s Guide Limitation of Liability The following is added to this Section Where Machines are not acquired for the purposes of a business as defined in the Consumer Guarantees Act 1993 the limitations in this Section are subject to the limitations in that Act PEOPLE S REPUBLIC OF CHINA PRC Governing Law The following replaces this Section Both you and IBM consent to the application of the laws of the State of New York except when local law requires otherwise to govern interpret and enforce all your and IBM s rights duties and obligations arising from or relating in any manner to the subject matter of this Agreement without regard to conflict of law principles Any disputes arising from or in connection with this Agreement will first be resolved by friendly negotiations failing which either of us has the right to submit the dispute to the China International Economic and Trade Arbitration Commission in Beijing the PRC for arbitration in accordance with its arbitration rules in force at the time The arbitration tribunal will consist of three arbitrators The language to be used therein will be English and Chinese An arbitral award will be final and binding on all the parties and will be enforceable under the Convention on the Recognition and Enforcement of Forei
71. not already inserted If a browser window automatically opens close the window 3 Click Next 4 Click Search for the best driver then click Next 5 Click CD ROM drive then click Next 1 10 IBM Data Migration Kit User s Guide 6 Click Next again to install the device driver that is displayed 7 Click Finish 8 Restart the computer 9 Proceed to Comnecting the computers Windows 95 Follow this procedure to install the Ethernet PC Card adapter device drivers in Windows 95 1 Ifitis not already running start Windows 95 The Update Device Driver wizard opens 2 Insert the IBM Data Migration User s Guide and Software CD in the CD ROM drive if it is not already inserted If a browser window automatically opens close that window 3 Click Next 4 Accept the detected device driver and click Finish If prompted for additional files click OK 5 Type the path e Drivers Xircom where e represents the drive letter of your CD ROM drive 6 Click Yes if prompted to restart the computer 7 Proceed to Connecting the computers Before performing the data migration you must connect the Ethernet ports on the two computers using the crossover cable included in the kit Follow these steps to connect the two computers 1 2 Insert the connector from one end of the crossover cable into the Ethernet port of your previous computer Note If you installed the Ethernet PC Card adapter in your mobile computer you
72. onents of a connection right click its icon and then click Properties To identify your computer on the 4 mahal elieb Kab nmeb 3 object s h 1 22 IBM Data Migration Kit User s Guide b Depending on your current network settings one of the following three Configure settings windows will open Follow the instructions in the Configure Settings window to set up NetBEUI and File and Print Sharing for Microsoft Networks on your new computer Proceed to step 18 El Configure settings lol xj Configure your local area connection Do the following 1 Right click Local Area Gonnection and then click Properties If more than one Local Area Connection icon is available click the one that represents the active network connection for your computer Make sure the check boxes for NetBEUI protocol and File and Print Sharing for Microsoft Networks are selected Click OK to exit Close the Network and Dial up Connections window Click here Al to exit this window and continue with the transfer process Installation and user s guide 1 23 1 24 l Configure settings Configure your local area connection Both the NetBIOS Extended User Interface NetBEUI proto amp ol and File and Print Sharing for Microsoft Networks components must be installed on your computer Do the following 1 Right click Local Area Connection and then click Properties If more than one Local Area Connection icon is available click
73. or example if you transferred the folder D Temp Apps from your previous computer the contents of the Apps folder would have been placed in the C Temp Apps folder on the new computer 6 Refer tq Suggestions after migration on page 1 70 1 48 IBM Data Migration Kit User s Guide Migrating data to a computer running Windows XP At this point your new and old computer should have an Ethernet adapter installed and they should be connected with the crossover cable included in the kit Follow the instructions in this section to perform the data migration to Windows XP To migrate to Windows XP you will use the File and Settings Transfer Wizard built into the Windows XP operating system Refer to the list below for a list of the settings that are transferred e Internet Explorer settings e Outlook Express settings and store e Outlook settings and store e Dial up connections e Phone and modem options e Accessibility e Screen saver selection e Fonts e Folder options e Taskbar settings Mouse and keyboard settings e Sounds settings Regional options e Office settings e Network drives and printers e Desktop folder e My Documents folder e My Pictures folder e Favorites folder Cookies folder Note To perform the data migration to Windows XP you will need one of the following e A diskette drive in or that can be connected to your new and previous computer and a blank formatted diskette e A CD RO
74. orm ticos Clase B de conformidad con el Est ndar Europeo EN 55022 Los l mites para los equipos de Clase B se han establecido para entornos residenciales t picos a fin de proporcionar una protecci n razonable contra las interferencias con dispositivos de comunicaci n licenciados Union Europea Normativa EMC Questo prodotto e conforme alle normative di protezione ai sensi della Direttiva del Consiglio dell Unione Europea 89 336 CEE sull armonizzazione legislativa degli stati membri in materia di compatibilita elettromagnetica IBM non accetta responsabilita alcuna per la mancata conformita alle normative di protezione dovuta a modifiche non consigliate al prodotto compresa l installazione di schede e componenti di marca diversa da IBM Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti stabiliti per le le apparecchiature di informatica Classe B ai sensi del Norma Europea EN 55022 I limiti delle apparecchiature della Classe B sono stati stabiliti al fine di fornire ragionevole protezione da interferenze mediante dispositivi di comunicazione in concessione in ambienti residenziali tipici maim 4 FZT MAA 1 DEE ES a LTRS Japanese statement of compliance for products less than or equal to 20 A per phase NMORENEI HERRE RBNA lt SL Appendix C Notices C 5 C 6 IBM Data Migration Kit User s Guide Part Number 31P8128 on recycled paper containing 10 Printed
75. oughout the life of the product Refer to your IBM Statement of Limited Warranty for a full explanation of IBM warranty terms Warranty information on the World Wide Web The IBM Machine Warranties Web site at http www ibm com servers support machine_warranties contains a worldwide overview of the IBM Limited Warranty for IBM Machines a glossary of terms used in the Statement of Limited Warranty Frequently Asked Questions FAQ and links to Product Support Web pages The IBM Statement of Limited Warranty is available from this Web site in 29 languages in Portable Document Format PDF Online technical support Online technical support is available during the life of your product Online assistance can be obtained through the Personal Computing Support Web site and the IBM Automated Fax System Online technical support IBM Personal Computing Support Web site http www ibm com pe support IBM Automated Fax System 1 800 426 3395 U S and Canada O Copyright IBM Corp 2002 B 1 During the warranty period assistance for replacement or exchange of defective components is available In addition if your IBM option is installed in an IBM computer you might be entitled to service at your location Your technical support representative can help you determine the best alternative Telephone technical support Installation and configuration support through the IBM HelpCenter will be withdrawn or made avail
76. ove back to the new computer and see Continuing the data migration process on the new computer on page 1 45 1 44 IBM Data Migration Kit User s Guide Continuing the data migration process on the new computer 1 On your new computer the following window should still be open Click Next to proceed with the transfer process IBM Data Transfer x Transfer data to your new computer Goto your previous computer Now you can transfer your data from the previous computer So tothe previous computer Install Data Transfer if it is not installed Start Data Transfer Enter the computer name from this machine Follow the instructions to copy your data from the previous computer ler After you have copied all data from the previous computer 1 Come back to this computer 2 Click Next Installation and user s guide 1 45 2 Click Next on the following window IBM Data Transfer xl Transfer data to your new computer Before continuing please read This program can now transfer the data that was copied fromthe previous computer To continue click Next 3 A window with a box will display copying data Please wait The program will finish the transfer This process could take a while depending on how much data is being transferred Do not run other programs while it is 1 46 IBM Data Migration Kit User s Guide processing al IBM Data Transfer x Transfer data to your new compute
77. owing window on the new computer click Next ah IBM Data Transfer Lx Welcome to IBM Data Transfer Use Data Transfer to transfer pour familiar Windows desktop settings or data files from an old computer previous computer to your new computer Before beginning make sure all other programs are closed To continue click Next 1 18 IBM Data Migration Kit User s Guide 12 On the next window select New computer and click Next IBM Data Transfer x Choose transfer options Which computer is this C Previous computer The computer from which you are transfering data K Conpaternane rom pour guten m ransenusmo a removable media diek dalt Ha coed tes 13 On the next window choose your transfer options selecting the settings you want to transfer Read the description below each selection for information on what will be transferred For each item selected a window will open with additional information about transferring that selection e If Windows desktop settings is selected the following window will open Please note that Internet bookmarks will only be copied if both computers have Active Desktop support Click OK Note To check whether you have Active Desktop installed right click on your computer desktop If Active Desktop is installed it is displayed in the right click menu IBM Data Transfer and the previous computer have Active Desktop sup
78. plays the message Are you sure you want to log off Click Yes 3 If you will be logging on to Windows with an existing user name and password enter them in the Enter Windows Password window Click OK and you will be logged on 4 If you will be creating a new user name type the new user name into the User name box and enter a password for that user name Click OK 5 The Set Windows Password window will open In the Confirm new password box enter in the new password Click OK and you will be logged on Windows 95 1 Click Start then Shut Down 2 On the Shut Down Windows window choose Close all programs and log on as a different user 3 If you will be logging on to Windows with an existing user name and password enter them in the Enter Windows Password window Click OK and you will be logged on 4 If you will be creating a new user name type the new user name into the User name box and enter a password for that user name Click OK 5 The Set Windows Password window will open In the Confirm new password box enter in the new password Click OK and you will be logged on Changing a user name password on your Windows computer Depending on your operating system configuration you may need to log on to both computers with the same username and password Make sure to follow the logon instructions underneath the appropriate section in Migrating data If you have additional questions about the log on requirements see the
79. port 2 Your internet bookmarks will only be copied if the new computer If Network settings is selected the following window will open Please note that if network settings are transferred any static IP addresses from your previous computer will be migrated to your new computer If you will have your new and previous computer on the same network after the migration they cannot have the same static IP address Therefore you might need to change the IP address of one of the Installation and user s guide 1 19 1 20 computers Click OK IBM Data Transfer gt After the transfer process is complete this computer and the previous computer cannot be connected to the network at the same time without changing the TCP IP address and the machine name of the previous computer If Folder contents is selected the following window will open Please note that any files that are transferred from the old computer will replace any files on the new computer that have the same name and same path For example if you transfer a folder with the path C Pictures that contains the file picturel bmp on your previous computer and your new computer already has a file with the path C Pictures picturel bmp then the picturel bmp file on your new computer will be replaced by the picturel bmp file from your previous computer If you transfer the folder C Picture from your previous machine and you already have a folder C Pictures on your new mac
80. previous computer Windows 2000 a The Network and Dial up Connections window opens E Network and Dial up Connections Fie Edt view Favorites Tools Advanced Help Gack gt gt Search LiFolders Bristory AF GF X A Ea Col Make Mew Connection 18M Global Network Network and Dial Local Area Connection up Connections This Folder contains network connections For this computer and awizard to help you create a new connection To create a new connection click Make New Connection To open a connection click its icon To access settings and components of a connection right click its icon and then click Properties To identify your computer on the lal mj gi I matumeb lieb Alab nmeb bas oo Oa 1 34 IBM Data Migration Kit User s Guide b Depending on your current network settings one of the following three Configure settings windows will open Follow the instructions in the Configure settings window to set up NetBEUI and File and Print Sharing for Microsoft Networks on your previous computer When finished proceed to step 16 2 Configure settings Configure your local area connection Do the following 1 Right click Local Area Connection and then click Properties If more than one Local Area Connection icon is available click the one that represents the active network connection for your computer Make sure the check boxes for NetBEUI protocol
81. r Betore continuing please read This program can now transfer the data that was copied from the previous computer To continue click Next IBM Data Transfer i x Copying data Please wait Installation and user s guide 1 47 4 When the transfer is complete the following window displays Click Finish The new computer will restart IBM Data Transfer u Transfer data to your new computer Congratulations To exit this program and reboot click Finish If you have a diskette in the floppy disk drive remove it now 5 Check to make sure that file and print sharing are disabled Disable them if they are not For more information on how to check and disable file and print sharing see Appendix A Troubleshooting Disabling file and print sharing on page A 7 All of your data and settings should be transferred Any folders that were selected to be transferred on the previous computer have been placed in the same path on the new computer For example if you transferred the folder C My Documents Pictures from your previous computer the contents of Pictures will be placed in the C My Documents Pictures folder on the new computer If the Pictures folder did not already exist on the new computer it would have been created during the transfer If you transfer a folder from any drive on the previous computer the folder will be placed in the same path on the C drive on the previous computer F
82. r Wizard begins collecting the files and settings on your old computer 9 On your new computer a password is displayed You will be prompted to enter that password on your old computer Go to your old computer and type in the password that is displayed on your new computer Click OK 10 The Files and Settings Transfer Wizard finishes collecting the data When this is complete the Completing the Collection Phase window opens Click Finish 11 The files and settings you selected to transfer will now be transferred from your old computer to your new computer 1 68 IBM Data Migration Kit User s Guide 12 On your old computer click Exit in the Welcome to Microsoft Windows XP window g Welcome to Microsoft Windows XP Fo What do you want to do 5 Install Windows XP Perform additional tasks Check system compatibility Installation and user s guide 1 69 13 On your new computer the Completing the Files and Settings Transfer Wizard window opens Click Finish Files and Settings Transfer Wizard Completing the Files and Settings Transfer Wizard You have successfully transferred your files and settings from your old computer to your new computer To close this wizard click Finish 14 On your new computer you will be prompted to log off for changes to take effect Click Yes Files and Settings Transfer Wizard You need to log off For the changes to take effect Do you want to log off now 15 The Files and
83. re logged on to the Windows XP machine with a user name that is part of the Administrators group See Supplemental Instructions for more information d Make sure neither computer is set up to log on to a Windows NT Domain For instructions on how to check and fix this refer to Supplemental Instructions in the following section e If your previous computer is running the original Windows 98 edition try setting static IP addresses for your Windows 98 and Windows XP machines by following the instructions under IP and DNS configuration setup for migrating from Windows 95 Follow the instructions under Windows 95 for your Windows 98 machine and the A 2 IBM Data Migration Kit User s Guide instructions under Windows XP for your Windows XP machine to set the IP addresses and DNS configuration Try the migration process again f Reboot both computers and try the migration again Supplemental instructions Refer to the contents of this section for additional instructions related to performing the data migration Logging on to your Windows computer with a user name and password Depending on your operating system configuration you may need to log on to one or both of your computers Make sure to follow the logon instructions underneath the appropriate section in Migrating data on page 1 14 If you have additional questions about the log on requirements see the table in item under Troubleshooting For information on ho
84. revious computer In this step you will choose which files and settings you want to transfer 5 Continue the migration process on the new computer 6 Follow the instructions in Suggestions after migration on For migrating to a computer running Windows XP Professional or Windows XP Home Edition the data migration consists of these basic steps 1 Install the Ethernet adapter and device drivers in your previous computer Skip this step if your previous computer already has an Ethernet adapter 2 Connect the Ethernet ports on your new computer and previous computer using the crossover cable included in the kit 3 Configure the IP and DNS settings on your new and previous computer Installation and user s guide 1 3 4 Start the Files and Transfer Settings wizard on the new computer 5 Create a wizard diskette if not using a Windows XP CD 6 Install the Files and Settings Transfer wizard on your previous computer using the Wizard diskette or a Windows XP CD 7 Run the Files and settings Transfer wizard on your previous computer 8 Continue the migration process on the new computer 9 Follow the instructions in Suggestions after migration on page 1 70 Installing the hardware This section contains instructions for installing the Ethernet adapter and device drivers in your previous computer e If you already have an Ethernet adapter in your previous computer go to Connecting the computers on pa
85. rted If the CD browser window opens close that window 3 Type the path e Drivers Intel w9xto the device drivers where e represents the drive letter of the CD ROM drive and click OK 4 Restart the computer when prompted 5 Proceed to Comnecting the computers on page 1 11 If the Add New Hardware Wizard window does not open in step 1 of the previous procedure check the Device Manager list to see if the new adapter is present If it is not follow these instructions to manually add the adapter Manually adding the Ethernet adapter device drivers with Windows 98 Click Start gt Settings gt Control Panel From the Control Panel double click the System icon Click the Device Manager tab Double click Other Devices or Network Adapters in the list area 20 RS Installation and user s guide 1 7 5 Double click PCI Ethernet Controller 6 Click the Driver tab and then click Update Driver 7 Click Display a list of all the drivers and click Next Insert the IBM Data Migration User s Guide and Software CD into the CD ROM drive if it is not already inserted and click Have Disk If a browser window automatically opens close that window 8 In the Copy manufacture s files from field type e Drivers Intel w9x where e represents the drive letter of the CD ROM drive 9 Follow the instructions to install the device drivers When the adapter is added it is shown in the Network Adapters list 10 Click OK in the Select
86. s computer using the same user name and password as you are logged on to your new computer with If your previous computer is running Windows 2000 that user name must be part of the Administrator s group on your previous computer Note For more information about logging on to Windows changing user passwords or verifying whether a user is part of the Administrators group see Supplemental instructions on page A 3 2 Insert the IBM Data Migration User s Guide and Software CD into the CD or DVD drive in your previous computer 1 28 IBM Data Migration Kit User s Guide 3 If your browser window does not automatically open click Start gt Run and type e launch htm where e represents the CD ROM or DVD drive Select or click your language on the language browser page 4 On the left side of the browser page click Install IBM Data Transfer Application to start the automated InstallShield program for IBM Data Transfer 5 The InstallShield Wizard window opens Click Next Es IBM Data Transfer InstallShield Wizard Welcome to the InstallShield Wizard for IBM Data Transfer The InstallShield Wizard T H will help install IBM Data Transfer on pour computer To continue click Nest Installation and user s guide 1 29 6 In the Setup Configuration window select Previous Computer and then click Next InstallShield Wizard u Setup Configuration Please answer the following question Which computer
87. s and Settings Transfer Wizard Note If the Files and Settings Transfer Wizard is not available directly from the Start menu click Start gt All Programs gt Accessories gt System Tools gt Files and Settings Transfer Wizard to start the program 2 The Files and Settings Transfer window opens Click Next Files and Settings Transfer Wizard Welcome to the Files and Settings Transfer Wizard This wizard helps you transfer files and settings from your old computer to pour new one You can transfer settings for Internet Explorer and Outlook Express as well as desktop and display settings dial up connections and other types of settings The best way to use this wizard for transferring files and settings is to use either a direct cable connection or a network Learn more about connecting your computers Please close any other programs before you continue To continue click Next Note Windows XP screen shots reprinted by permission from Microsoft Corporation Installation and user s guide 1 55 3 At the next window select New computer and click Next Files and Settings Transfer Wizard Which computer is this Is this your new computer or your old one New computer This is the computer want to transfer files and settings to Old computer This is the computer want to transfer files and settings from Note The old computer can be running any of the following operating systems Windows 95
88. st of all drivers in a specific location then click Next Select Network Adapter from the list then click Next gi PFoON 1 6 IBM Data Migration Kit User s Guide 6 Insert the IBM Data Migration User s Guide and Software CD into the CD ROM drive if it is not already inserted If the CD browser window opens after you insert the CD close that window 7 Click Have Disk 8 In the Copy manufacturer s files from field type e Drivers Intel w9x where e represents the drive letter of the CD ROM drive 9 Follow the instructions to install the device drivers When the adapter is added it appears in the Network adapters list 10 Click OK in the Select Device window 11 When the Update Wizard displays the message that the device driver has been found click Next 12 Click Finish 13 Restart your computer when prompted 14 Proceed to Comnecting the computers on page 1 11 Windows 98 Follow this procedure to install the Ethernet device drivers in Windows 98 1 After you install the Ethernet adapter in the computer start the computer The New Hardware Found window opens Note If this window does not open and Windows 98 starts normally you might need to manually add the device drivers using instructions in Manually adding the Ethernet adapter device drivers with Windows 98 on page 17 2 When prompted insert the IBM Data Migration User s Guide and Software CD into the CD ROM drive if it is not already inse
89. stance via telephone with how to questions and those regarding Machine set up and installation will be provided WITHOUT WARRANTIES OF ANY KIND Warranty Service To obtain warranty service for a Machine contact IBM or your reseller If you do not register your Machine with IBM you may be required to present proof of purchase During the warranty period IBM or your reseller if approved by IBM to provide warranty service provides without charge certain types of repair and exchange service to keep Machines in or restore them to conformance with their Specifications IBM or your reseller will inform you of the available types of service for a Machine based on its country of installation At its discretion IBM or your reseller will 1 either repair or exchange the failing Machine and 2 provide the service either at your location or a service center IBM or your reseller will also manage and install selected engineering changes that apply to the Machine Some parts of IBM Machines are designated as Customer Replaceable Units called CRUs e g keyboards memory or hard disk drives IBM ships CRUs to you for replacement by you You must return all defective CRUs to IBM within 30 days of your receipt of the replacement CRU You are responsible for downloading designated Machine Code and Licensed Internal Code updates from an IBM Internet Web site or from other electronic media and following the instructions that IBM provides
90. ta using a local area network Network settings Windows desktop settings Folder contents To continue click Next lt Back Cancel Help cem 17 The next window allows you to select the folders that will be transferred Type a folder path in the first box and click Add or click Browse to look for the folders a IBM Data Transfer x Transfer data to your new computer Choose the folders you want to transfer To select a folder type in the folder name below and click Add If you do not know the name click Browse to view folders Folder name 18 If you clicked browse a window will display to allow you to select a folder to be transferred Select a folder and click OK Repeat for additional 1 40 IBM Data Migration Kit User s Guide folders you want to transfer For each folder selected all files and subfolders under that folder will be transferred Browse for Folder Aer 3 Floppy 4 3 C_drive C 3 IBM DataTra D Control Panel J Printers 3 Dial Up Networking Scheduled Tasks i e Web Folders E E Network Neighborhood ay Recycle Bin Mu Rriefrase 19 The program will add each folder to the bottom box When finished selecting all folders to transfer click Next Installation and user s guide 1 41 Note The IBM Data Transfer software cannot be used to migrate software applications only data files IBM Data Transfer x Transfer data
91. table in item 1 under Troubleshooting If you need to change a password for a username to match the password for that user name on the other computer see the instructions below Windows 2000 1 Log on to Windows 2000 with the user name you want to change to password for Appendix A Troubleshooting hints and tips A 5 Press Control Alt Delete on the keyboard In the Windows Security window click the Change Password button In the Change Password window enter the current password for that user in the Old Password box Enter the new password in the New password box and then enter the new password again into the Confirm New Password box Click OK The Change Password window indicates that the password was changed Click OK In the Windows Security window click Cancel Log off of Windows 2000 and log back on using password For more information see instructions under Logging on to Windows 2000 with a user name that is part of the Administrators group on page A 4 Windows Me Windows 98 Windows 95 1 SS Log on to Windows with the user name you want to change the password for Click Start point to Settings and then click Control Panel In the Control Panel double click Passwords In the Passwords Properties window click the Change Password tab On the Change Passwords tab click Change Windows Password If the Change Windows Password window is displayed with the message You may also change ot
92. the Administrators group in Windows XP 1 Click Start point to Settings and then click Control Panel 2 In the Control Panel double click User Accounts 3 If only user names with Limited Access then the current user logged on does not have Administrator privileges Log off and select another user name Note If you are not able to determine which user accounts have administrator privileges contact the person who first setup your XP system for account and password information Windows 2000 You must log on to your Windows 2000 machine with a user name that is part of the Administrators group If you know the user name and password of a user that is part of the administrator s group this could be the built in administrator account or an account you created as part of the Administrators group follow the procedure under Logging on to Windows 2000 with a user name that is part of the Administrators group If you don t know the password of the administrator account and are unsure whether a user name is part of the Administrator s group follow the procedure under whether a user name is part of the Administrators group in Windows 2000 Logging on to Windows 2000 with a user name that is part of the Administrators group 1 If you are already logged on as a user that is not part of the Administrators group close all programs click Start and point to Shut Down 2 In the Shut Down Windows window choose Log O
93. tion of Liability The following replaces the second sentence of the first paragraph of this Section In such instances regardless of the basis on which you are entitled to claim damages from IBM IBM is liable for no more than items 1 and 2 unchanged Appendix B Warranty information B 11 IRELAND Extent of Warranty The following is added to this Section Except as expressly provided in these terms and conditions all statutory conditions including all warranties implied but without prejudice to the generality of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and Supply of Services Act 1980 are hereby excluded Limitation of Liability The following replaces items one and two of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence and 2 the amount of any other actual direct damages up to 125 percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim Applicability of suppliers and resellers unchangea The following paragraph is added at the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default shall be limited to damages ITALY Limitation of Liability The following replaces the second sentence in the first paragraph In each suc
94. ttings Transfer Wizard Completing the Files and Settings Transfer Wizard You have successfully transferred your files and settings from your old computer to your new computer To close this wizard click Finish 17 On your new computer you will be prompted to log off for changes to take effect Click Yes Files and Settings Transfer Wizard You need to log off for the changes to take effect Do you want to log off now 18 The Files and Settings io Wizard is complete Proceed to 1 62 IBM Data Migration Kit User s Guide Migrating to Windows XP using a Windows XP CD 1 On your new computer at this window ensure I will use the wizard from the Windows XP CD is selected Click Next Files and Settings Transfer Wizard Do you have a Windows XP CD You will also need to run this wizard on your old computer You can either create a wizard disk to use on your old computer or use the wizard from the Windows XP CD To create a Wizard Disk insert a blank formatted disk into this computer s disk drive Make sure the old computer has the same type of drive O want to create a Wizard Disk in the following drive q 3 Floppy 4 O I already have a Wizard Disk will use the wizard from the Windows XP CD O don t need the Wizard Disk have already collected my files and settings from my old computer Installation and user s guide 1 63 2 The Now go to your old computer window opens Move to the previo
95. us computer and insert the Windows XP CD into the CD ROM or DVD drive Files and Settings Transfer Wizard Now go to your old computer To collect your files and settings 1 Go to your old computer and insert the Windows XP CD into the CD ROM drive 2 On the CD menu that appears click Perform additional tasks 3 On the next menu that appears click Transfer files and settings Note If a menu does not appear click Start and then click Run Type D setup where D is pour CD ROM drive and then click OK After you collect your files and settings from your old computer return here and then click Next Or if you are using the direct cable method to transfer files and settings click Next to go to the following page and select Direct cable lt Back l Next gt Cancel 3 On the previous computer the following menu will appear from the CD Click Perform additional tasks Note If this menu does not automatically run when the CD is inserted click Start and then run Type e setup where e represents the drive letter of the CD ROM or DVD drive in the previous 1 64 IBM Data Migration Kit User s Guide computer Click OK e Welcome to Microsoft Windows XP 6 What do you want to do 5 Install Windows XP E Perform additional tasks gt Check system compatibility R exit 4 At the next window click Transfer files and settings y Welcome to Microsoft Windows XP What do you want to do gt
96. w computer Before continuing please read Si a a le neh Compuker name x R J The computer name for this computer new computer is shown below Please write it down before proceeding You will be prompted for it on your previous computer Computer name from your new computer NEWCOMPUTER 19 The following window will display instructing you to go to your previous computer Do not click Next at this time Proceed to your previous Installation and user s guide 1 27 computer to continue the process a IBM Data Transfer E x Transfer data to your new computer Goto your previous computer Now you can transter your data from the previous computer 1 Go tothe previous computer 2 Install Data Transfer if t is not installed 3 Start Data Transfer 4 Enter the computer name from this machine 5 Follow the instructions to copy your data from the previous computer After you have copied all data from the previous computer 1 Come back to this computer 2 Click Next 20 Proceed to Installing and running the IBM data transfer software on the Installing and running the IBM data transfer software on the previous computer Follow this procedure to install and run the IBM Data Transfer software on the previous computer Note You might need the original diskettes or CD that came with your operating system 1 If your new computer is running Windows 2000 log on to your previou
97. w to logon to your Windows machine refer to the instructions below Windows XP You must log on to your Windows XP machine with a user name that is part of the Administrators group If you know the user name and password of a user that is part of the administrator s group this could be the built in administrator account or an account you created as part of the Administrators g follow the procedure under name that is part of the Administrators group If you don t know the password of the administrator account and are unsure whether_a user name is part of the Administrator s group follow the procedure under whether a user name is part of the Administrators group in Windows XP on Logging on to Windows XP with a user name that is part of the Administrators group 1 If you are already logged on as user that is not part of the Administrators group close all programs click Start gt Logoff 2 Select a user name that has Administrator privileges 3 Log on with the correct user name and password If you are not already logged on as that user follow the instructions above under If there are no user names that you know the password for and that are part of the Administrators group contact your administrator to either get the Administrator user name password or to have your user name added to the Administrators group Appendix A Troubleshooting hints and tips A 3 Checking whether a user name is part of
98. ws open click Yes on each one to keep the existing file 14 When Windows restarts the application takes you back to this window Click Next Note If this window does not display when Windows restarts and you see the window asking for the name of the computer skip to step 15 a IBM Data Transfer x Welcome to IBM Data Transfer Use Data Transfer to transfer your familiar Windows desktop settings or data files from an old computer previous computer to your new computer Before beginning make sure all other programs are closed To continue click Next 15 In the Choose Transfer Options window ensure Previous computer and Transfer using a network connection is selected Type in the name of the new computer you should have written this down from the new 1 38 IBM Data Migration Kit User s Guide computer and then click Next a IBM Data Transfer NEWCOMPUTER rrr 16 A window will display the items that you have selected to transfer Click Next Note If the following window does not open and an error window opens your previous computer cannot connect to your new computer Follow the instructions in the error window to correct the connection problem For more information on specific error Installation and user s guide 1 39 troubleshooting tips see Troubleshooting on page A 1 Transfer data to your new computer Before continuing please read You hawe chosen to transfer da

IBM 31P8128 Computer Drive User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents