IBM 2626 Laptop User Manual
Contents
1. Complete Easy to find Easy to understand Well organized OOOOUO Applicable to your tasks Please tell us how we can improve this book Thank you for your responses May we contact you Yes No When you send comments to IBM you grant IBM a nonexclusive right to use or distribute your comments in any way it believes appropriate without incurring any obligation to you Name Address Company or Organization Phone No Readers Comments We d Like to Hear from You SENG 2809 04 Fold and Tape Please do not staple Fold and Tape BUSINESS REPLY MAIL FIRST CLASS MAIL PERMIT NO 40 ARMONK NEW YORK POSTAGE WILL BE PAID BY ADDRESSEE IBM CORPORATION ATTN DEPT 542 IDCLERK 3605 Highway 52 N ROCHESTER MN 55901 7829 NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES Fold and Tape SENG 2809 04 Please do not staple Fold and Tape Cut or Fold Along Line Cut or Fold Along Line Printed in the United States of America on recycled paper containing 10 recovered post consumer fiber SENG 2809 042. for those devices are unplugged before the signal cables are connected or disconnected If possible disconnect all power cords from the existing system before you add or remove a device RSFTD203 DANGER To prevent a possible electrical shock during an electrical storm do not connect or disconnect cables or station protectors for communications lines display stations printers or telephones RSFTD003 DANGER To prevent a possible electrical shock from touching two surfaces with different electrical grounds use one hand when possible to connect or disconnect signal cables RSFTD004 Caution Notices A caution notice calls attention to a situation that is potentially hazardous to people because of some existing condition CAUTION Telecommunications Statement This unit contains over voltage circuits between the ac power outlet and the unit These circuits meet the standard limits described in International Electrical Commission IEC 664 installation category II It is the customer s responsibility to ensure that the power outlet meets the standards of IEC 664 installation category II RSFTC214 Copyright IBM Corp 1998 2000 iii Laser Safety Information CAUTION This product may contain a CD ROM which is a class 1 laser product RSFTC240 Product Recycling and Disposal Components of the system such as structural parts and circuit cards can be recycled where recyclin
3. the control panel Does a B N appear in the Function Data display 7 RV4D109 0 Yes No Do the following a Press the Up or Down select push button until 02 appears in the Function Data display b Press the Enter push button on the control panel c Press the Up or Down select push button until B N appears in the Function Data display d Press the Enter push button on the control panel e Press the Up or Down select push button until 01 appears in the Function Data display f Press the Enter push button on the control panel g Go to step Al Power on the workstation or PC that is your console Press the system unit power on button The power on light will appear Note The system takes approximately 6 to 10 minutes to power on and complete an IPL Sign on the system unit Ensure that you have service tools authority Do the following to verify your adapter card configuration a On an AS 400 command line type STRSST Press the Enter key When the Start a Service Tools menu appears select the Start a service tool option Press the Enter key When the Start a Service Tool menu appears select the Hardware service manager option Press the Enter key When the Hardware Service Manger menu appears select the Packaging hardware resources system frames cards option Press the Enter key When the Packaging Hardware Resources menu appears typ
4. AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card Instruction Version 4 SENG 2809 04 AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card Instruction Version 4 SENG 2809 04 Note Before using this information and the product it supports be sure to read the and the Notices on page 11 Fifth Edition July 2000 This edition applies only to reduced instructions set computer RISC systems Copyright International Business Machines Corporation 1998 2000 All rights reserved US Government Users Restricted Rights Use duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp Safety and Environmental Notices Danger Notices A danger notice calls attention to a situation that is potentially lethal or extremely hazardous to people DANGER An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the products that attach to the system It is the customer s responsibility to ensure that the outlet is correctly wired and grounded to prevent an electrical shock RSFTD201 DANGER To prevent a possible electrical shock when installing the system ensure that the power cords for all devices are unplugged before installing signal cables RSFTD202 DANGER To prevent a possible electrical shock when adding or removing any devices to or from the system ensure that the power cords
5. IBM Intellectual Property Department in your country or send inquiries in writing to IBM World Trade Asia Corporation Licensing 2 31 Roppongi 3 chome Minato ku Tokyo 106 Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON INFRINGEMENT MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Some states do not allow disclaimer of express or implied warranties in certain transactions therefore this statement may not apply to you This information could include technical inaccuracies or typographical errors Changes are periodically made to the information herein these changes will be incorporated in new editions of the publication IBM may make improvements and or changes in the product s and or the program s described in this publication at any time without notice Information concerning non IBM products was obtained from the suppliers of those products their published announcements or other publicly available sources IBM has not tested those products and cannot confirm the accuracy of performance compatibility or any other claims related to non IBM products Questions on the capabilities of non IBM products should be addressed to the suppliers of
6. and increased product energy efficiency For more information contact an IBM account representative iv AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card V4R5 Installation Instructions This feature is customer installed It will take approximately 1 hour to install the hardware However you may elect not to perform this feature installation yourself You may contact IBM or an Authorized Dealer to make arrangements for them to perform the feature installation for a fee You need to allow additional time to complete your jobs back up your system IPL your system and verify your hardware configuration Copyright IBM Corp 1998 2000 When you use these instructions you will do the following e Remove the system unit covers e Install your new hardware e Install covers e IPL your operating system e Verify your new hardware configuration Some of the steps in these instructions may require a tool to remove the screws Use a medium sized standard screwdriver or a 5 5 mm socket wrench Some of the pictures in these instructions may not look exactly like the system unit that you have However the steps to perform the task are the same Before you begin e Ensure that you have a current backup of your operating system and licensed programs If you have backed up the operating system and licensed programs since the last time you applied PTFs that backup is acceptable e Ensure that you take a few minu
7. ds Australia and new Zealand Class A Statement Attention This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Trademarks The following terms are trademarks of the IBM Corporation in the United States or other countries or both AS 400 AS 400e series Client Access Client Access 400 IBM Operating System 400 OS 400 400 800 IBM CALL Microsoft Windows Windows NT and the Windows logo are trademarks or registered trademarks of Microsoft Corporation UNIX is a registered trademark in the United States and other countries licensed exclusively through X Open Company Limited Other company product and service names which may be denoted by a double asterisk may be trademarks or service marks of others Notices 13 14 AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card V4R5 Readers Comments We d Like to Hear from You AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card Instruction Publication No SENG 2809 04 Overall how satisfied are you with the information in this book Very Satisfied Satisfied Neutral Dissatisfied Very Dissatisfied Overall satisfaction O How satisfied are you that the information in this book is Very Satisfied Satisfied Neutral Dissatisfied Very Dissatisfied Accurate
8. e a 9 in front of the System Unit Press the Enter key Verify the adapter card you just installed appears in the card position it was installed If the adapter card is not listed ensure that the card is properly installed Did you move an adapter card Installation Instructions 9 No Yes v Verify that the card you moved is listed on the Packaging Hardware Resources menu If a resource is missing look for a because an adapter card was moved do the following 1 On the line that has the question mark type a 4 in the Opt column to remove the resource from the configuration 2 Press the Enter key 3 When Confirm Remove of Packaging Hardware Resources s appears press the Enter key 4 If you move an adapter card or replace an adapter card with another adapter card you need to change the Resource Name For information on changing resource names go to AS 400 online information or the Basic System Operation Administration and Problem Handling SC41 5206 04 5 Go to step bl __ 9 Print the configuration list if you have a printer Note To print the configuration list press F6 on the Packaging Hardware Resources menu Place the configuration list in the Basic System Operation Administration and Problem Handling SC41 5206 04 book 10 To return to the AS 400 Main menu press F3 three times and then press the Enter key 11 For information on how to make your card operational go to the AS 400 Informa
9. ersonnel may replace this battery using the instructions in the Problem Analysis Repair and Parts service manual To avoid possible explosion do not burn or charge the battery Exchange only with the IBM approved part Discard the battery as instructed by local regulations RSFTC241 __ 4 Attach the disposable wrist strap to prevent electrostatic discharge from damaging a device EEEE shows an example of where to attach the adhesive part of the foil to an unpainted surface Notes a Follow the same precautions you would use without the wrist strap The 2209 Disposable Wrist Strap is for static control It will not increase nor decrease your risk of receiving electric shock when using or working on electrical equipment b Discard the wrist strap immediately and contact your dealer for a replacement if the disposable wrist strap appears damaged or cut off Do not continue until a new wrist strap is available c Remove the liner from the copper foil at the end when you unroll the wrist strap d Attach the copper foil to an exposed unpainted metal surface on the frame of the system unit electrical ground 4 AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card V4R5 RV4D201 0 Figure 4 Attach Wrist Strap 5 You will be installing the 2809 or 2824 card in card slot E07 6 Before you install the adapter card remove the adapter card slot cover inside the syste
10. g facilities exist IBM does not currently collect and recycle used IBM products from customers in the United States other than those products that are involved in trade in programs Companies are available to disassemble reutilize recycle or dispose of electronic products Contact an IBM account representative for more information The system unit contains batteries and circuit boards with lead solder Before you dispose of this unit these batteries and circuit boards must be removed and discarded according to local regulations or recycled where facilities exist This book contains specific information on each battery type where applicable Battery Return Program In the United States IBM has established a collection process for reuse recycling or proper disposal of used IBM batteries and battery packs For information on proper disposal of the batteries in this unit please contact IBM at 1 800 426 4333 Please have the IBM part number that is listed on the battery available when you make your call For information on battery disposal outside the United States contact your local waste disposal facility Environmental Design The environmental efforts that have gone into the design of the system signify IBM s commitment to improve the quality of its products and processes Some of these accomplishments include the elimination of the use of Class I ozone depleting chemicals in the manufacturing process reductions in manufacturing wastes
11. m unit by doing the following a Remove the screw b Slide the slot cover out Installation Instructions 5 RV4D202 1 Figure 5 Remove Slot Cover __7 Find the package that contains the new adapter card Attention Adapter cards are fragile e Handle only by the edges e Keep fingers off printed circuit area e Use static strap when handling e Leave in protective packaging until ready to install Remove the adapter card from the electrostatic package 8 Install the adapter card in the Expansion unit side of the system unit by doing the following a Align the adapter card with the card slot E07 Figure 6 on page 7 b Slide the card into the system unit and push on both sides of the card until the card is all the way into the slot and the connector Note The screw tab on the adapter card should be even with the frame on the system unit and aligned with the screw hole when completely installed c Install the screw J that holds the adapter card in place Figure 6 onl 6 AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card V4R5 7 Ve WAY WA WA E RV4D203 1 Figure 6 Install Adapter Card __ 9 Do you have any other adapter cards or devices to install No Yes v If you know where to install the adapter card follow the steps you just performed to install the card If you d
12. o not know where to install the adapter card go to the instructions that came with the adapter card Look for the tables or steps that tell you where to install the adapter card and complete the installation If you have another device such as a disk unit a tape unit or a memory card to install go to the instructions that came with that device __ 10 Install the Expansion unit side cover by aligning the tabs on the top and bottom edge and press forward to make sure that all tabs enter the slots Slide the cover toward the front of the system unit until it stops and install the screws Installation Instructions 7 Q H NY NA NA he NIK i 1 O A pte A RV4D204 1 Figure 7 Install Side Cover Completing the Installation 1 Install the system unit back cover __ 2 DANGER An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the products that attach to the system It is the customer s responsibility to ensure that the outlet is correctly wired and grounded to prevent an electrical shock RSFTD201 Plug the following power cords into an electrical outlet e System unit e System unit console __ 3 Plug in and power on all attached devices such as printers and displays 8 AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card V4R5 __ 4 Look at the Function Data display on
13. o the system unit 4 Unplug any power cords such as printers and displays from electrical outlets 5 Unplug the system unit power cord from the electrical outlet 6 Remove the system unit back cover by placing your hand near the bottom of the cover and lifting up and out wy RV4D101 0 Figure 1 Remove System Unit Back Cover 2 AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card V4R5 Installing the 2809 or 2824 LAN WAN Workstation Card 1 The adapter card slots are E02 through E14 in the expansion unit figure D Slot E01 is not an available position a o Ell Un o N o o a a T o d ES gt E Al 2 amp 5 o 90g o E06 iA O Oo E gt gt ME coa i He __ 22 9 ST fe a EE i 2 RV4D118 3 Figure 2 Adapter Card Positions 2 Remove the left side cover by removing the screws and sliding the cover from front to back until it stops Pull the cover out STEERED Ol Installation Instructions 3 v RV4D200 0 Figure 3 Remove System Unit Side Cover Your system unit contains a battery that only trained personnel can replace 3 CAUTION The battery is a lithium battery Only trained service p
14. rence caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment Unauthorized changes or modifications could void the user s authority to operate the equipment This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Responsible Party International Business Machines Corporation New Orchard Road Armonk NY 10504 Telephone 1 919 543 2193 Industry Canada Compliance Statement This Class A digital apparatus meets the requirements of the Canadian Interference Causing Equipment Regulations Avis de conformit la r glementation d Industrie Canada Cet appareil num rique de la classe A respecte toutes les exigences du R glement sur le mat riel brouilleur du Canada European Community Compliance Statement 12 AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card V4R5 This product is in conformity with the protection requirements of EU Council Directive 89 336 EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non recommended modification of the product including the fitting of non IBM option car
15. tes to become familiar with these instructions e If there are incorrect missing or visibly damaged parts contact one of the following Your authorized dealer Point of purchase For example IBM Direct IBM Rochester Manufacturing Automated Information Line R MAIL 1 800 300 8751 United States 1 507 253 5242 worldwide Determine if there are any existing prerequisites before you install your new feature Go to this Web site and locate your feature number and OS 400 release and check the prerequisites http as400service ibm com s_dir slkbase NSF Then do the following to get to the Customer Install Features Prerequisites Select All Documents Select Collapse Select General Information Select Offerings Select Feature Prerequisites m OoOaQd0 7 w Select Customer Install Features Prerequisites When you have the following cards install them in the sequence listed below e The 2809 or 2824 LAN WAN workstation card e The 285x or 2866 Integrated NetFinity cards e All other adapter cards Getting Ready 1 Ensure that all jobs are complete 2 When all jobs are complete type pwrdwnsys immed on an AS 400 command line and press the Enter key Note Should you encounter difficulties during the installation contact your authorized dealer or service provider 3 When the AS 400 is completely powered down power off all PCs and devices such as printers and displays that are connected t
16. those products Copyright IBM Corp 1998 2000 11 If you are viewing this information softcopy the photographs and color illustrations may not appear The drawings and specifications contained herein shall not be reproduced in whole or in part without the written permission of IBM IBM has prepared this publication for use by customer personnel for operating and planning for the specific machines indicated IBM makes no representations that it is suitable for any other purpose Electronic Emission Notices Federal Communications Commission FCC Statement Note This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Properly shielded and grounded cables and connectors IBM Part Number 75G5958 75G2865 97H7385 or its equivalent must be used in order to meet FCC emission limits IBM is not responsible for any radio or television interfe
17. tion Center You can access the Information Center from the AS 400 Information Center SK3T 2027 03 or from the following Web site http www as400 ibm com infocenter 12 Your feature upgrade is complete Keep all miscellaneous parts such as wrap connectors in a safe place 10 AS 400e 170 or 250 2809 or 2824 LAN WAN Workstation Card V4R5 Notices This information was developed for products and services offered in the U S A IBM may not offer the products services or features discussed in this document in other countries Consult your local IBM representative for information on the products and services currently available in your area Any reference to an IBM product program or service is not intended to state or imply that only that IBM product program or service may be used Any functionally equivalent product program or service that does not infringe any IBM intellectual property right may be used instead However it is the user s responsibility to evaluate and verify the operation of any non IBM product program or service IBM may have patents or pending patent applications covering subject matter described in this document The furnishing of this document does not give you any license to these patents You can send license inquiries in writing to IBM Director of Licensing IBM Corporation 500 Columbus Avenue Thornwood NY 10594 U S A For license inquiries regarding double byte DBCS information contact the
Download Pdf Manuals
Related Search