Huawei HG532 Network Router User Manual
Contents
1. B m Cl als E U 1 Telephone jack on the wall 2 Splitter 3 Power adapter 4 Computer 5 Telephone 2 3 Connecting Multiple Telephones If your telephone line is used for the broadband network access telephone connections and fax connections take the following figure as a reference for connecting the cables 1 Telephone jack 2 Splitter 3 Power adapter 4 Computer on the wall 5 Telephone 6 Fax machine 7 Microfilter 8 T connector 2 4 Getting Started Press down the ON OFF button on the side of the HG532 to power on the HG532 After you power on the HG532 the POWER indicators turns on and the ADSL indicator blinks for less than three minutes which indicates that the HG532 is being activated After the ADSL indicator blinking the POWER and ADSL indicators keep solid on which indicates that the HG532 is working properly 3 Setting the Network Access Parameters The HG532 supports ADSL2 uplink and High Speed Packet Access HSPA uplink through Huawei HSPA data card Realizes dynamic mutual backup of voice and data services through the DSL link and HSPA link 3 1 Configuring the HSPA uplink When the HG532 is working through Huawei HSPA data card you need to install the Huawei HSPA data card on the HG532 so that your P2. EchoLife HG532 Home Gateway User Guide SK HUAWEI TECHNOLOGIES CO LTD HUAWEI Wiz HUAWEI EchoLife HG532 Home Gateway V100R001 User Guide Issue 03 Date 2010 06 25 Part Number 202147 Huawei Technologies Co Ltd provides customers with comprehensive technical support and service Please feel free to contact our local office or company headquarters Huawei Technologies Co Ltd Address Huawei Industrial Base Bantian Longgang Shenzhen 518129 People s Republic of China Website http www huawei com Email terminal huawei com Copyright Huawei Technologies Co Ltd 2010 All rights reserved No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co Ltd The product described in this manual may include copyrighted software of Huawei Technologies Co Ltd and possible licensors Customers shall not in any manner reproduce distribute modify decompile disassemble decrypt extract reverse engineer lease assign or sublicense the said software unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses Trademarks and Permissions wW y HUAWEI HUAWEI and are trademarks or registered trademarks of Huawei Technologies Co Ltd Other trademarks product service and company names mentioned are the property of their respective ow
3. contact your network operator Check whether the LAN indicator of the terminal is on If the LAN indicator is off perform further checks as follows 17 Step 4 Step 5 Step 6 Step 7 1 Ensure that the network adapter of the computer is enabled 2 Ensure that the network cable between the terminal and the computer is properly connected Remove and then insert the network cable or replace the network cable when necessary If the LAN indicator is still off contact an authorized maintenance center Check whether the driver for the network adapter is properly installed Take a computer that runs Windows XP as an example To check whether the driver for the network adapter is installed do as follows 1 On the desktop right click My Computer and then choose Manage 2 In the navigation tree of the Computer Management window choose Device Manager 3 In the right pane of the Computer Management window click Network adapters to view the information about the network adapter of the computer If no network adapter is found or if a question mark or an exclamation mark is displayed next to the icon of the network adapter you can infer that the driver for the network adapter is not properly installed In this case re install the driver for the network adapter of the computer Ensure that you have entered the correct user name and user password that are required by the PPP dial up software The user name and the us
4. however your customized data is lost Therefore use this function with caution 5 2 Enabling or Disabling the Wireless Network Function You can quickly enable or disable the wireless network function by pressing the WLAN button on the HG532 To enable the wireless network function press and hold the WLAN button for over one second and then release the button You can disable the wireless network function in the same way The WLAN indicator shows whether the wireless network function is enabled In addition you can enable or disable the wireless network function through the Web based configuration utility To enable or disable the wireless network function do as follows Step 1 Log in to the Web based configuration utility Step2 In the navigation tree on the left choose Basic gt LAN Step 3 Choose the WLAN page Step 4 Select or not select Enable WLAN option button Step5 Click Submit wireless network function is enabled If the WLAN indicator is on the fa You can refer to the state of the WLAN indicator to check whether the wireless network function is enabled 5 3 Changing the Wireless Network Name and the Access Password To change the name and access password for the wireless network do as follows taking the authentication type WPA PSK as an example 13 Step 1 Log in to the Web based configuration utility Step 2 Inthe navigation tree on the left choose Basic gt LAN Step 3 Choose the WLAN page Step 4
5. Enter a wireless network name in the SSID text box Step5 Select WPA PSK from the Security drop down combo box Step 6 Enter an access password in the WPA pre shared key text box Step7 Select TKIP from the WPA encryption drop down combo box Step8 Click Submit to save the settings 5 4 Setting Up a Wireless Connection Through the WPS Protocol The HG532 supports the WPS technology By using this technology the HG532 can connect to a wireless terminal easily and safely During the connecting process you do not need to enter the name and access password of the WLAN network To use the WPS function your wireless network adapter should support the WPS function Meanwhile you need to set the encryption type of the WLAN to WPA PSK or WPA2 PSK To set up a wireless connection by using a wireless network adapter through the WPS protocol do as follows Step 1 Enable the WPS function 1 Log in to the Web based configuration utility 2 Inthe navigation tree on the left choose Basic gt LAN 3 Choose the WLAN page 4 Select Enable for WPS 5 Click Submit Step 2 Launch the WPS client software of the wireless network adapter of the computer Perform operations based on the software user interface to display the interface of searching for the wireless network Step 3 Press the WPS button on the side panel of the HG532 within two minutes The WPS indicator of the HG532 blinks in green which indicates that the connection between th
6. and can be displayed after the terminal is restarted Step 1 Step 2 Step 3 Ensure that the terminal and other devices such as telephones or fax machines are connected to telephone lines through a splitter For details about how to install a splitter see the related description in the manual Ensure that telephone lines are properly connected If the telephone lines are improperly connected the stability of the network connection is affected Check the positions of your terminal and your computer Ensure that they are far from electric appliances such as microwave ovens refrigerators or cordless telephones that generate strong magnetic or electric fields If the problem persists contact your service provider What can I do if sometimes the terminal cannot access the Internet through a WLAN connection or if the WLAN connection is unsteady Step 1 Step 2 Step 3 Step 4 Step 5 Check the positions of your terminal and your computer Ensure that they are far from the electric appliances such as microwave ovens refrigerators or cordless telephones that generate strong magnetic or electric fields Place your terminal in an open area Although radio signals can pass through obstacles the transmission effects of WLAN radio signals are affected if radio signals pass through too many obstacles such as cement or wooden walls Place your computer close to your terminal If your computer is far from your ter
7. and the wireless network security mode of the WLAN is set to WPA PSK or WPA2 PSK Setting Up a Wireless Connection Manually If your network adapter does not support the WPS function you can set up a wireless connection between your PC and the HG532 manually To manually set up a wireless connection use either of the following methods Use the tool provided by your network adapter For details see the user guide of your network adapter Use the wireless configuration software provided by the operating system of your PC This section takes Windows XP as an example and describes how to set up a wireless connection between your PC and the HG532 manually do as follows Step 1 Enable the wireless network function and set the wireless network name and access password of the HG532 1 Log in to the Web based configuration utility 2 In the navigation tree on the left of the Web based configuration utility choose Basic gt WLAN Select the Enable WLAN option Enter a wireless network name in the SSID text box Select WPA PSK from the Security drop down combo box Enter an access password in the WPA pre shared key text box Select AES from the WPA encryption drop down combo box Click Submit to save the settings 9OdcV ON NE gt Step 2 Enable the wireless configuration service provided by Windows XP 1 Right click My Computer and then choose Manage from the shortcut menu 2 In the Computer Management window choose Comp
8. between you PC and the HG532 8 Close the Wireless Network Connection dialog box 9 Inthe Wireless Network Connection Properties dialog box click OK 5 Configuring the HG532 5 1 Changing the Administrator Password Used for Logging In to the Web Based Configuration Utility For safety reasons or to make the password easy to remember you can change the administrator password for login after logging in to the Web based configuration utility To change the password do as follows Step 1 Log in to the Web based configuration utility Step 2 Choose Maintenance gt Account in the navigation tree to display the system management page Step3 Select admin from the User name drop down combo box Step 4 Enter the Current password and the new password Then enter the new password again in the Confirm password text box for confirmation 12 Step 5 Click Submit After you change the password successfully the current page jumps to the page for logging in to the Web based configuration utility To log in to the Web based configuration utility enter the new password and then click OK fr If you forget the user name or password that has been changed you can dis restore the default settings of the HG532 by pressing and holding the RESET button for over six seconds Then the user name and password that are used for logging in to the Web based configuration utility are restored to default values After you restore the default settings
9. of other parameters 7 Click Submit After you complete the preceding settings you can surf the Internet You need to perform the preceding operations on a computer once only The next time when you power on your computer you can surf the Internet without any configuration Accessing the Network Through the PPP Dial Up Software on Your Computer If you select this method for accessing the network you need to install and configure the dial up software on your computer In addition you need to perform dial up operations on your computer upon each startup To configure the HG532 and your computer for the network access do as follows Step 1 Set the working mode of the HG532 to Bridge l 2 S 4 In the navigation tree on the left of the Web based configuration utility choose Basic gt WAN Select a PVC from the connection list Select Bridge from the Connection mode drop down combo box Click Submit Step 2 Install and configure the PPP dial up software on your computer The PPP dial up software is pre installed on certain computer operating systems To create a dial up connection do as follows taking the Windows XP operating system as an example 1 2 Bein Choose Start gt All Programs gt Accessories gt Communications gt Network Connections Click Create a new connection in Network Tasks to display the New Connection Wizard window and then click Next Select Connect to the Internet and the
10. over six seconds after the HG532 is powered on and then release the button What can I do if I cannot access the Internet through the terminal Step 1 Step 2 Step 3 Check whether the POWER indicator on the terminal is solid on If the POWER indicator is off perform further checks as follows 1 Ensure that the terminal is turned on 2 Ensure that electricity comes from the socket and that the power input from the socket meets the requirements described on the label of the terminal power adapter If the voltage is unsteady for example if the voltage is too high or too low do not use the terminal Wait until the voltage restores to its normal level and then use the terminal 3 Ensure that the terminal is properly connected to the socket through the power adapter If the POWER indicator is still off contact an authorized maintenance center After powering on the terminal wait for about three minutes Then check whether the ADSL indicator on the terminal is solid on If the ADSL indicator blinks for a long time perform further checks as follows 1 Ensure that telephone lines are properly connected Pay special attention to the connections between the telephone lines and the splitter 2 Ensure that the terminal or telephone lines are far from the electric appliances that generate strong magnetic or electric fields Replace telephone lines when necessary If the ADSL indicator still blinks and does not turn solid on
11. C can connect to the Internet through HSPA uplink To create a HSPA uplink connection do as follows Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Log in to the Web based configuration utility 1 Launch the Internet Explorer on your computer Enter http 192 168 1 1 in the address bar and then press Enter 2 In the displayed dialog box enter the user name and the password and then click Login By default both the user name and the password are admin After the user name and the password are verified you can access the Web based configuration utility Click Basic gt WAN in the navigation tree to display the WAN Connection Page Click the connection whose access type is UMTS Select Enable for WAN connection Enter the APN and the Dial number that are provided by the network operator in the APN text box and the Dial number text box Enter the user name and password in the User name and Password text boxes that you can configure Click the Submit button to finish the UMTS settings If you want to verify the PIN code of your SIM card then do as follows Step 1 Step 2 Step 3 Click Advanced gt PIN in the navigation tree to display the PIN Page Enter the original PIN number in the PIN text box Click the Submit button to finish the settings on the PIN Page Use the default values for the other parameters In general they do not need to be configured 3 2 Configuring the ADSL uplink By confi
12. S function you can use the WPS function to set up a wireless connection between your PC and the HG532 quickly To set up a wireless connection do as follows Step 1 Enable the wireless network function and set the wireless network name and access password of the HG532 do as follows taking the authentication type WPA PSK as an example 1 Login to the Web based configuration utility of the HG532 In the navigation tree on the left of the Web based configuration utility choose Basic gt WLAN Select the Enable WLAN option Enter a wireless network name in the SSID text box Select WPA PSK from the Security drop down combo box Enter an access password in the WPA pre shared key text box Select AES from the WPA encryption drop down combo box Click Submit to save the settings Step 2 Press the WPS button of the HG532 to enable the HG532 to enter the WPS negotiation state N CO Oe Step 3 Enable the WPS negotiation function of the wireless network adapter on your PC within two minutes and then wait for a moment typically 10s and at most 120s The WPS indicator of the HG532 becomes on from the blinking state indicating that the HG532 is connected to your PC through the WLAN This state lasts 300s Then the WPS indicator turns off 10 p If the WPS indicator does not blink it indicates that the WPS function cannot be enabled Note that the WPS function can be used only when the wireless network function is enabled
13. ce contact its manufacturer for the restrictions on the use of the device Do not take the device into operating rooms intensive care units ICUs or coronary care units CCUs Areas with Inflammables and Explosives Do not use the device where inflammables or explosives are stored for example in a gas station oil depot or chemical plant Otherwise explosions or fires may occur In addition follow the instructions indicated in text or symbols Do not store or transport the device in the same box as inflammable liquids gases or explosives Accessory Requirements Use only the accessories supplied or authorized by the device manufacturer Otherwise the performance of the device may get affected the warranty for the device or the laws and regulations related to telecommunications terminals may become null and void or an injury may occur Do not use the power adapter if its cable is damaged Otherwise electric shocks or fires may occur Ensure that the power adapter meets the specifications indicated on the device nameplate Ensure that the power adapter meets the requirements of Clause 2 5 in IEC60950 1 EN60950 1 and it is tested and approved according to national or local standards Safety of Children Keep the device and its accessories out of the reach of children Otherwise they may damage the device and its accessories by mistake or they may swallow the small components ofthe device causing suffocation or other
14. dangerous situations 2 Maintenance If the device is not used for a long time power it off and then remove all the cables connected to it If any exception occurs for example if the device emits any smoke or unusual sound or smell stop using the device immediately power it off remove all the cables connected to it and then contact an authorized service center Do not trample pull or overbend any cable Otherwise the cable may get damaged causing malfunction of the device Before cleaning the device stop using it power it off and then remove all the cables connected to it Use a clean soft and dry cloth to clean the device shell Do not use any cleaning agent or spray to clean the device shell 2 Connecting the Cables and Getting Started 2 1 Simple Connection If your telephone line is used for the broadband network access only and do not need to use a telephone take the following figure as a reference for connecting the cables 1 Telephone jack on the wall 2 Power adapter 3 Computer f If the wireless network function is used on the HG532 for the network AN access you do not need to connect the cables 2 2 Connecting One Telephone If your telephone line is used for both the broadband network access and a telephone connection take the following figure as a reference for connecting the cables
15. e HG532 and the wireless network adapter is being set up through the WPS function After a few seconds normally 10s to 120s the WPS indicator of the HG532 turns solid on in orange this state lasts for 300s which indicates that the connection between the HG532 and the wireless network adapter is set up successfully 14 p The WPS applications may vary with different types of wireless network P adapters For details about the configuration and operations of the WPS application refer to the operation guide provided by the application provider 5 5 Changing the IP Address Used for Logging In to the Web Based Configuration Utility To make the login IP address easy to remember you can change the IP address after logging in to the Web based configuration utility To change the IP address do as follows Step 1 Log in to the Web based configuration utility Step 2 In the navigation tree on the left choose Basic gt LAN Step 3 Choose the DHCP page Step 4 Enter a new IP address as desired in the IP address text box Then enter a subnet mask in Subnet mask Step5 Click Submit p To log in to the Web based configuration utility after you change the IP address successfully you need to launch the Internet Explorer and then enter the new IP address in the address bar Ensure that the IP address of the computer is in the same network segment as that of the HG532 so that the computer can access the Web based configuration utili
16. ect it from the power supply Ensure that your hands are dry during operation Keep the device far from sources of heat and fire such as a heater or a candle Keep the device far from electronic appliances that generate strong magnetic or electric fields such as a microwave oven or a refrigerator Place the device on a stable surface Place the device in a cool and well ventilated indoor area Do not expose the device to direct sunlight Use the device in an area with a temperature ranging from 0 C to 40 C Do not block the openings on the device with any object Reserve a minimum space of 10 cm around the device for heat dissipation Do not place any object such as a candle or a water container on the device If any foreign object or liquid enters the device stop using the device immediately power it off remove all the cables connected to it and then contact an authorized service center During thunderstorms power off the device and then remove all the cables connected to it to prevent it from getting damaged due to lightning strikes Precautions for Using Wireless Devices When using the device ensure that the antenna of the device is at least 20 cm away from all persons Do not use the device where using wireless devices is prohibited or may cause interference or danger The radio waves generated by the device may interfere with the operation of electronic medical devices If you are using any electrical medical devi
17. er password are provided by your network operator Check whether you can use the PPP dial up software to dial successfully If you cannot use the PPP dial up software to dial successfully perform further checks as follows 1 Stop the PPP dial up software and then power off the terminal After five minutes power on the terminal and then use the PPP dial up software to dial again 2 Restore the default settings of the terminal If the problem persists contact your network operator Check whether the proxy server of the Web browser is correctly configured Take the Internet Explorer installed on a computer that runs Windows XP as an example To check whether the proxy server of the Web browser is correctly configured do as follows 1 Launch the Internet Explorer 2 Choose Tools gt Internet Options 3 In the Internet Options dialog box click the Connections tab 4 In the Local Area Network LAN settings group box click LAN Settings 5 In the Proxy server group box of the Local Area Network LAN 18 Step 8 Settings dialog box ensure that the Use a proxy server for your LAN These settings will not apply to dial up or VPN connections check box is cleared Try to access multiple Web sites to check whether the terminal can access these Web sites If the terminal still cannot access Web sites contact your network service provider What can I do if Web pages often cannot be displayed during Web page browsing
18. guring the HG532 and your computer you can choose any of the following methods to surf the Internet Accessing the Network Through the Embedded PPP Dial Up Software on the HG532 e Accessing the Network Through the PPP Dial Up Software on Your Computer Accessing the Network Through the Embedded PPP Dial Up Software on the HG532 If you select this method for accessing the network the HG532 starts to set up a dial up connection automatically after the startup You can access the network after you power on your computer You do not need to install any special dial up software on your computer or perform dial up operations on your computer To configure the HG532 and your computer for the network access do as follows Step 1 Verify the HG532 and the PC have connected properly and the PC has obtained the IP address Step 2 Log in to the Web based configuration utility of the HG532 Step 3 Enable the embedded dial up function 1 In the navigation tree on the left of the Web based configuration utility choose Basic gt WAN 2 Select a PVC from the connection list 3 Select Route from the Connection mode drop down combo box 4 Enter the VPI and VCI parameters that are provided by the network operator in the VPI VCI text boxes 5 Select PPPoE from the Connection type drop down combo box 6 Enter the user name and password that are provided by the network operator in the Username and Password text boxes keep the default settings
19. ing e The wireless network function is enabled e Data is being transmitted through the WLAN On e The wireless network function is enabled e No data is being transmitted through the WLAN Off The wireless network function is disabled 20 Indicator Status Description WPS Blinking The HG532 is attempting to set up a wireless connection with a wireless client such as a PC on which a wireless network adapter is installed through the WPS function This state lasts no more than 120s On A wireless connection is set up between the HG532 and a wireless client through the WPS function This state lasts 300s Off The WPS function is disabled LANI LANA4 Blinking Data is being transmitted through the Ethernet interface On The Ethernet connection is set up Off The Ethernet connection is not set up USB Blinking Data is being transmitted on the USB port On The USB port is connected Off The USB port is not connected 7 2 Interfaces and Buttons Interface or Button Description POWER It is used to connect the power adapter USB It is used to connect the USB device LANI LAN4 It is used to connect to the Ethernet interface on the computer RESET You can press and hold the RESET button for over six seconds to restore the default settings of the HG532 Note After you restore the default settings your customized data is lost Therefore use this function
20. minal the effects of the WLAN are affected Place your terminal and computer in another direction Do not use your terminal to access the WLAN during thunderstorms 19 After a broadband terminal is installed does Internet access degrade call quality or do telephone calls lower the Internet access rate No The terminal uses the frequency division multiplexing FDM and splitter technologies to separate voice signals from data signals Although the two types of signals are transmitted through one telephone line they are carried by different frequency bands Therefore they do not interfere with each other In this case you can make a telephone call and access the Internet simultaneously without degrading call quality or lowering the Internet access rate 7 Appendix 7 1 Indicators Indicator Status Description POWER On The HG532 is powered on Off The HG532 is powered off ADSL Blinking The HG532 is being activated On The HG532 is activated Off The HG532 is powered off INTERNET Blinking Data is being transmitted On e The dial up operation through the embedded PPP dial up function of the HG532 succeeded but no data is being transmitted e The HG532 works in routing mode e The WAN connection is set up e No data is being transmitted Off The HG532 is working in bridging mode or the dial up operation through the embedded PPP dial up function of the HG532 failed WLAN Blink
21. mission G dmt e Maximum downlink rate 8 Mbit s rates T1 413 e Maximum uplink rate 896 kbit s G 992 5 e Maximum downlink rate 24 ADSL2 Mbit s e Maximum uplink rate 1024 kbit s Wireless 802 11b 1 Mbit s 2 Mbit s 5 5 Mbit s and 11 transmission rates Mbit s 802 11g 6 Mbit s 9 Mbit s 12 Mbit s 18 Mbit s 24 Mbit s 36 Mbit s 48 Mbit s 54 Mbit s 802 11n 6 5 Mbit s 13 0 Mbit s 13 5 Mbit s 19 5 Mbit s 26 0 Mbit s 27 0 Mbit s 39 0 Mbit s 40 5 Mbit s 52 0 Mbit s 54 0 Mbit s 58 5 Mbit s 65 0 Mbit s 78 0 Mbit s 81 0 Mbit s 104 0 Mbit s 108 0 Mbit s 117 0 Mbit s 121 5 Mbit s 130 0 Mbit s 135 0 Mbit s 162 0 Mbit s 216 0 Mbit s 243 0 Mbit s 270 0 Mbit s 300 0 Mbit s 23 HUAWEI TECHNOLOGIES CO LTD Huawei Industrial Base Bantian Longgang Shenzhen 518129 People s Republic of China www huawei com Part Number 202147
22. n click Next Select Set up my connection manually and then click Next Select Connect using a broadband connection that requires a user name and password and then click Next Enter the name as desired of the dial up connection in ISP Name and then click Next Select Anyone s use or My use only and then click Next Enter the user name and password provided by the network operator and used for the dial up connection and then click Next Select Add a shortcut to this connection to my desktop and then click Finish An icon for the dial up connection is displayed on the desktop of your computer You need to perform the preceding operations only once for creating a network connection After the network connection is created to access the network double click the icon for the dial up connection and then click Connect in the displayed dialog box 4 Configuring the Wireless Network Connection If a wireless network adapter is installed on your computer you can connect you computer to the HG532 through a wireless connection wireless network adapters provided by different companies vary from each other For details see the installation guide provided by the wireless network adapter provider p The hardware installation methods and driver installation methods of Setting Up a Wireless Connection Through the WPS Button The HG532 supports the Wi Fi Protected Setup WPS function If your network adapter also supports the WP
23. ners Notice Some features of the product and its accessories described herein rely on the software installed capacities and settings of local network and may not be activated or may be limited by local network operators or network service providers Thus the descriptions herein may not exactly match the product or its accessories you purchase Huawei Technologies Co Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED AS IS EXCEPT AS REQUIRED BY APPLICABLE LAWS NO WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE MADE IN RELATION TO THE ACCURACY RELIABILITY OR CONTENTS OF THIS MANUAL TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO CASE SHALL HUAWEI TECHNOLOGIES CO LTD BE LIABLE FOR ANY SPECIAL INCIDENTAL INDIRECT OR CONSEQUENTIAL DAMAGES OR LOST PROFITS BUSINESS REVENUE DATA GOODWILL OR ANTICIPATED SAVINGS Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export re export or import the product mentioned in this manual including the software and technical data therein Contents 1 Safety PrecautiOms iisscssciscss cos
24. ol 14 5 5 Changing the IP Address Used for Logging In to the Web Based Configuration Utility m t Ota dae e pet deeds 15 5 6 Restoring Default Settings ssesssseeeeeseee eene 15 OFA OS m 17 VAS NQUSIUI SED E 20 751 Indicatots ze ade eh o o de e i e e EO EE RS 20 7 2 Interfaces and Buttons sse treten 21 7 3 Default Settings sse eet tnnt 22 74 Technical Specifications isenip men e ert ON ee ee 22 ii 1 Safety Precautions Thank you for purchasing the EchoLife HG532 Home Gateway hereinafter referred to as the HG532 To use the device properly and safely read these warnings and precautions carefully and strictly observe them during operation Unless otherwise specified the term device refers to the device and its accessories Basic Requirements During storage transportation and operation of the device keep it dry and prevent it from colliding with other objects Do not dismantle the device In case of any fault contact an authorized service center for assistance or repair Without authorization no organization or individual can change the mechanical safety or performance design of the device When using the device observe all applicable laws and regulations and respect the legal rights of other people Environmental Requirements for Using the Device Before connecting and disconnecting cables stop using the device and then disconn
25. sccvscccssciecedsasteslesssts cabietsscctescsbeabaasiesdesssticasiesss 1 2 Connecting the Cables and Getting Started esses 4 2 41 Simple Connie ction sedente teet 4 2 2 Connecting One Telephone cccececcscsseseseseseseeseeeeeececsenenenencseacaeeeeeseeeeeeees 5 2 3 Connecting Multiple Telephones ssseessseeeeeeenr eene 5 2 4 Getting Started aon enn IP drop d edet 6 3 Setting the Network Access Parameters eeeee essere ene eren enero 7 3 1 Configuring the HSPA uplink seen 7 3 2 Configuring the ADSL uplink eese 8 Accessing the Network Through the Embedded PPP Dial Up Software on the HG532 o4 oeste eite ente rene eR 8 Accessing the Network Through the PPP Dial Up Software on Your COMPUTER i dcr Pec prep eere e E ree ud 8 4 Configuring the Wireless Network Connection eere 10 Setting Up a Wireless Connection Through the WPS Button 10 Setting Up a Wireless Connection Manually 5 Configuring the HG532 eee eee esee e esee ente eee ennt tn tne ta enne tn snue 12 5 1 Changing the Administrator Password Used for Logging In to the Web Based Configuration Utility esses eren 12 5 2 Enabling or Disabling the Wireless Network Function ss 13 5 3 Changing the Wireless Network Name and the Access Password 13 5 4 Setting Up a Wireless Connection Through the WPS Protoc
26. ty 5 6 Restoring Default Settings After you restore the default settings your customized data is lost Therefore use this function with caution You can quickly restore the default settings of the HG532 by pressing the RESET button on the rear panel To restore the default settings press and hold the RESET button for over six seconds after the HG532 is powered on and then release the button In addition you can restore the default settings of the HG532 through the Web based configuration utility To restore the default settings through the Web based configuration utility do as follows 15 Step 1 Step 2 Step 3 Step 4 Log in to the Web based configuration utility In the navigation tree on the left choose Maintenance gt Device Choose the Reset page Click the Restore Default Settings button After the preceding operations the current page jumps to the login page You can log in to the Web based configuration utility by entering the default user name and password that are admin 16 6 FAQs How can I quickly enable or disable the wireless network function Press and hold the WLAN button for over one second and then release the button to enable or disable the wireless network function The WLAN indicator shows whether the wireless network function is enabled How can I quickly restore the default settings of the terminal To restore the default settings press and hold the RESET button on the rear panel for
27. uter Management Local gt Services and Applications gt Services 3 From the services listed in the right pane of the Computer Management window right click Wireless Zero Configuration and then choose Properties from the shortcut menu 4 In the Wireless Zero Configuration Properties Local Computer dialog box check whether Service status is Started If not click Start 5 Click OK to close the dialog box and then close the Computer Management window Step 3 Configure the wireless network connection on your computer 11 1 Choose Start gt All Programs gt Accessories gt Communications gt Network Connections 2 In the Network Connections window right click Wireless Network Connection to display a shortcut menu and then select View Available Wireless Networks from the shortcut menu 3 In the Wireless Network Connection Properties dialog box select Wireless Networks Select Use Windows to configure my wireless network settings Click View Wireless Networks 6 In the Wireless Network Connection dialog box select the WLAN with the same name that is configured in Step 1 and then click Connect in the lower right corner of the window 7 In the displayed dialog box enter the access password that is preset in Step 1 and then click Connect dE After the password is authenticated Connected is displayed in the upper right corner of the WLAN icon in the WLAN list indicating that a wireless connection is set up
28. with caution ADSL It is used to connect to the MODEM interface on the splitter WPS It is used to set up a wireless connection between the HG532 and a wireless terminal easily and safely 21 Interface or Button Description WLAN It is used to enable or disable wireless network function quickly ON OFF It is the power switch and is used to power on or power off the HG532 7 3 Default Settings Parameter Setting IP address of the LAN interface 192 168 1 1 Subnet mask of the LAN interface 255 255 255 0 User name used for logging in to the Web based admin configuration utility Password used for logging in to the Web based admin configuration utility DHCP server function Enable Wireless network function Enable 7 4 Technical Specifications Item Specification Power supply 12VDC 1A Power consumption lt 11 W Ambient 0 C to 40 C 32 F to 104 F temperature for operation Ambient humidity 5 to 95 non condensing for operation Dimensions 164 mm x 49 mmx 142 mm LxWxH Weight About 300 g 22 Item Specification Standards ADSL standards e ITU G 992 1 G dmt Annex A e ITU G 992 2 G lite e ITU G 994 1 G hs e ANSI T1 413 Issue 2 ADSL2 standard ITU G 992 3 G dmt bis Annex A ADSL2 ITU G 992 5 Annex A standard WLAN standard 802 11b 802 11g 802 11n DSL trans
Download Pdf Manuals
Related Search