Fuji Bikes UG230 Series Network Card User Manual
Contents
1. Rear of this TV SR Of FEPP OPO SS III 9200000202 SRI SE O o A LILLA Dt a o SER E RA 3 se aS x a onono Le I ERI RO eae o ERS oe E 2 ee a S SSS o GI sE LL o Le 0 po doo o o a SIRO ra eae E Stands 1 Turn the TV over and place it screen first onto a o table which has a soft cloth draped over it e Only use the screw holes indicated by 2 for mount Place the TV in a way so that the stands hang ing the TV over the edge of the table e For instructions on how to attach the TV rails refer to the instruction manual included with the mount wall kit NOTES e Make sure to use a table which can support the weight of the TV and is larger than the TV e Make sure the table is in a stable location 4 Attach the TV to the wall 2 Remove the stands from the TV NOTE Unscrew the M5 screws indicated by O and e Refer to the instruction manual included with the i mount wall when securing the TV to the wall remove the left and right stands NOTE If you want to attach the stands of this TV again e The screws and stands you have removed are neces insert the stand slowly as illustrated below and sary for reattachment at a later date Make sure to drive screws in the 4 threaded holes keep them in a safe place 3 Attach the left and right TV rails to the TV using the M8 screws included with the wal2. A technologies OWNER S MANUAL CIWP4206 A T TO RECEIVE DIGITAL ANALOG SIGNAL YOU MUST CONNECT ANTENNA DTV By changing the screen display mode from time to time HOM you can reduce burn in on screen HIGH DEFINITION MULTIMEDIA INTERFACE Refer to CHANGING THE SCREEN DISPLAY MODE on page 21 DO potey DIGITAL IF YOU NEED ADDITIONAL ASSISTANCE WITH SET UP OR OPERATING AFTER READING OWNER S MANUAL PLEASE CALL TOLL FREE 1 800 474 0045 OR VISIT OUR WEB SITE AT http www funai corp com WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLI ANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION To REDUCE THE RISK OF ELEC TRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL THIS SYMBOL INDICATES THAT DANGER OUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAIN TENANCE INSTRUCTIONS IN THE LITERA TURE ACCOMPANYING THE APPLIANCE The important note is located on the rear of the cabinet IMPORTANT SAFETY INSTRUCTIONS e at a NRC 10 11 EN Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block
3. Infrared Sensor Window Receives infrared rays transmit ted from the remote control STANDBY indicator Illuminates when TV is in stand by mode Disappears when the power is ON ON indicator Lights up when the power is ON POWER button p13 To turn TV on off SETUP button p23 To display on screen menu VOLUME A V buttons p18 r lr To adjust volume and move right A left V through the menu items NOTE e With buttons VOL AN or MUTE you can only adjust the volume of the main unit You cannot adjust the volume of the external devices with these buttons About Interference to Infrared Devices Preventing Image Burn on the plasma display Please note in advance that using other infrared devices Fixed images displayed on the plasma display for an such as infrared cordless headphones near the plasma extended period of several hours may cause uneven pixel display may cause infrared interference to occur aging causing damage to the plasma display You should About Pixel Defects o try to avoid displaying fixed images for extended periods A plasma display is created by using a collection of miniature on the plasma display pixels It is possible to display more than 99 99 of valid pix els however a small fraction of pixels over the life of the product may not illuminate or may constantly be illuminated This is not to be considered a defect in the plasma panel Images of high luminance displayed on the plasma d
4. Ta DETAIL ES LANGUAGE 2 Select DETAIL and press ENTER to confirm e Using A F select HDMI Audio and press ENTER to confirm 2 EXIT Closed Caption V chip o HDMI Audio HDMI Audio Auto CHANNEL Panel Saver Off Ta DETAIL EA LANGUAGE l 3 Switch the HDMI Audio e Using A F select the desired HDMI Audio then press ENTER Detail D EXIT Closed Caption V chip HDMI Audio ga PICTURE G CHANNEL Panel Saver Ta DETAIL 2 LANGUAGE e Select Auto if you connected to both digital device with HDMI jack and analog device for audio sources Digital audio input signal has priority in this setting e Select Digital if you connected to digital device with HDMI jack for digital audio input signal e Select Analog if you connected to analog device with analog jacks for analog audio input signal 4 To exit the setup press SETUP Arracnc A WALL MOUNT BRACKET SOLD SEPARATELY The following is a description of the method for attaching a wall mount to the TV When performing this operation refer to the instruction manual included with the wall mount kit CAUTION e Any damage caused by incorrectly attempting to mount the TV is not covered under the terms of the manufacturer s warranty e This TV is for use only with the Sanus Systems Model VMPL Wall Mount Use with other wall mounts may result in instability causing possible injury
5. repeatedly until Sleep Off is displayed e The Sleep Timer setting display will automati cally disappear in a few seconds NOTE e When you disconnect your TV from its power source or when a power failure occurs the sleep timer setting will be canceled OPTIONAL SETTINGS SETUP SCREEN This section describes the overview of the setup screen displayed when you press SETUP For more details see the reference page for each item The setup screen consists of the function setting items below To exit settings o FRI PICTURE You can adjust the picture quality Picture Mode Brightness Contrast Color Tint Sharpness Color Temp Refer to PICTURE ADJUSTMENT on page 24 o oN You can automatically scan the viewable channels and remove those that are undesired Refer to AUTOSCAN on page 14 You can change closed captioning display formats and font styles Refer to CLOSED CAPTION on page 25 Block children s access to inappropriate program ming Refer to V CHIP on page 28 And select HDMI Audio if your TV is connected to a digital external device like a DVD recorder Refer to HDMI AUDIO on page 30 E LANGUAGE juvwxy You can change the language English Spanish French displayed on the setup screen Refer to LANGUAGE SELECTION on page 17 NOTES e To cancel the setup screen press SETUP e If you do not operate this TV for more
6. DVD recorder or VCR AUDIO button p19 Cycles through audio options e Analog mode TV Selects audio mode e Digital mode DTV Selects audio language STILL button p19 Press to pause screen image SCREEN MODE button p21 Press to select screen aspect ratio INFO button e Analog mode TV p22 To display channel No signal type and TV setting Digital mode DTV p22 To display channel information signal type and TV setting e External input mode p20 To display external input mode signal type and TV setting CH A V buttons p18 p20 To select channels and external input mode SLEEP x POWER button p13 Press to turn the TV on and off Number buttons p18 Press to select a channel SETUP button p23 Press to display on screen menu 4 A v buttons p13 To move left right up down through the items ENTER button p13 Press to confirm your selection BACK button p22 Press to return to previous menu operation VOL A V buttons p18 Press to adjust volume MUTE button p18 Press to turn sound on and off CH RETURN button p18 Press to return to previously viewed channel INPUT SELECT ENTER button p20 p13 e To access connected external devices like a DVD recorder or VCR e To decide the command of setting when the menu is dis played CHANNEL A V buttons p18 To select channels and move up down through the menu items
7. L ETE e Available languages differ depending on the broadcast e The information display will automatically dis _ appear in one minute ED NOTE When you press AUDIO the currently selected e Pressing AUDIO does not control external audio source audio mode will be displayed on the screen 6 SAP STEREO 19 EN ACCESSING EXTERNAL DEVICES Use your remote control to access DVD recorders home audio systems and other external devices when they are connected to your television Use your remote control to select external com ponent e When you press INPUT SELECT or CH V on the remote control the input mode will be switched as below TV DTV channel y y y y e Pressing CH A on the remote control reverses direction e To use the VIDEO1 or S VIDEO1 input jack on the TV select Video1 e To use the VIDEO2 or S VIDEO2 input jack on the TV select Video2 e To use the COMPONENTI input jacks on the TV select Component1 e To use the COMPONENT2 input jacks on the TV select Component2 e To use the HDMI IN jack on the TV 20 select HDMI EN e When you press INFO the current external input mode the type of resolutions for video signal TV aspect ratio CC and TV rating will be displayed at the top right of the screen e The information display will automatically dis appear in 1 minute 1 When using VI
8. V CHIP You can block certain programming inappropriate for children This block can be released by entering a password 1 Display the setup screen e Press SETUP The following setup screen appears FA CHANNEL nas ra DETAIL 2 LANGUAGE 2 Select DETAIL and press ENTER e Using A F select V chip _ Detail 2 EXIT osed Caption Iv a PICTURE E CHANNEL U Cad EZTTE e Press ENTER The password entry screen is displayed E CHANNEL Enter password Ta DETAIL EZ LANGUAGE iii PIN Code 3 Enter the password e Use the Number buttons and enter the 4 digit number Ta DETAIL A LANGUAGE ua ii PIN Code Back e When you have not set up your password enter 0000 e When the password is correct the following V Chip screen is displayed A MPAA Rating TV Rating New Password atin E PICTURE UGE New Password l CHANNEL Ta DETAIL E LANGUAGE See the following description for setting each item A MPAA Rating 4 Display the MPAA Rating screen e Using A V select MPAA Rating V Chip MPAA Rating 5 Set MPAA Rating e Using A F select the rating e Press ENTER and set to View or Block DD EXIT Fea PICTURE E CHANNEL Ta DETAIL Ed LANGUAGE 6 To exit the setup press SETUP lt Selection gt lt Rating Category Explanations gt X Mature audience o
9. any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other appa ratus including amplifiers that produce heat Do not defeat the safety purpose of the polar ized or grounding type plug polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provid ed plug does not fit into your outlet consult an electrician for replacement of the obsolete out let Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand PORTABLE CART WARNING tripod bracket or table speci fied by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart appara tus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service person nel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has bee
10. been completed Refer to AUTOSCAN on page 14 Autoscan must be completed when you set up your TV for the first time or move it to a location where previously unavailable channels are broadcast e The selected channel may not be broadcasting e When Autoscan is interrupted some channels will not be received Make sure to complete Autoscan in the setup screen e Many digital channels have alternate channel numbers TV changes the numbers automatically to the ones signifying the broadcasting stations These are the numbers used for analog broadcasts e Check the antenna or cable connection to the main unit e Check the batteries of the remote control e Check if there is an obstacle between the sensor and the remote control e Test the signal output If OK there might be remote sensor trou ble Refer to IR SIGNAL CHECK on page 36 MISCELLANEOUS 33 EN Problems with Closed Caption Feature Misspelled captions are displayed e Closed captioning production companies may broadcast pro grams without correcting the misspelling in a live broadcast Captions are not entirely displayed or Captions that are delayed a few seconds behind the actual dialogue captions are delayed behind the dia are common for live broadcasts Most captioning production compa logue nies can display a dialogue to a maximum of 220 words per minute If a dialogue exceeds that rate selective editing is used to ensure that the captions remai
11. c bles pr sent s ici ne sont pas fournis avec le t l viseur cran plasma Plasma Display TV rear side Arri re du t l viseur cran plasma R AUDIO LO VIDEO2 S VIDEO2 A Cl LE COMPONENTI voor O L DIGITAL AUDIO AUDIO PEOIA R E nO r Or S VIDEO HDMI CONNECTION COMPONENT CONNECTION CONNEXION HDMI CONNEXION COMPOSANTES VHF UHF antenna Antenne VHF UHF Cable box or Satellite box D codeur de c blodistribution Satellite dish ou d codeur satellite Antenne parabolique Power cord is included Le cordon d alimentation est fourni Plasma Display TV rear side Arri re du t l viseur cran plasma MID Ot Analog Audio DATE Connection CONNEXION DE SORTIE AUDIO VID O ANALOGIQUE e a AUDIO IN VIDEO AUX Stereo system Cha ne st r o Digital Audio Output Connection CONEXION DE SORTIE AUDIO NUM RIQUE AUDIO IN E VIDEO AUX DIGITAL OR au i CO Dolby Digital decoder D codeur Dolby Digital ANT IN AUDIO OUT COAXIAL Plasma Display TV rear side Arri re du t l viseur cran plasma DIGITAL A HDMI IN coma O Or CG Plasma Display TV rear side Arri re du t l viseur cran plasma AUDIO OUT AUDIO DIGITAL HDMI IN CONNEXION HDMI DVR or DVD Player With HDMI Out Jack DVR ou Lecteur DVD avec prise de sortie HDMI Pl
12. color of the displayed caption can be switched as below CC Style 2 EXIT Font Style O Reale TURE Font Size TE CHANNEL M Der y x LANGUAGE Edge Color Edge Type Font Color Font Opacity Back Color Back Opacity Back Opacity Background opacity of the displayed caption can be switched as below CC Style 2 EXIT User Setting Font Style O mal ere Font Size El CHANNEL Ta DETAIL Font Color Font Opacity Back Color Back Opacity A LANGUAGE Edge Color Edge Type Edge Color User Setting Closed Caption White Black I Red 7 Green Blue Yellow Magenta Cyan Closed Caption soi Flash Translucent OPTIONAL SETTINGS Transparent Edge color of the displayed caption can be switched as below CC Style User Setting Font Style Font Size Font Color Font Opacity Back Color Back Opacity Edge Color Edge Type Edge Type Closed Caption White Black Red 7 Green Blue Yellow Magenta Cyan Edge type of the displayed caption can be switched as below HET Closed Caption Der User Setting Font Style FS PICTURE El CHANNEL Ta DETAIL Font Size Font Color Font Opacity Back Color Back Opacity A LANGUAGE Edge Color Edge Type None Raised Depressed Uniform L Shadow R Shadow 7 To exit the setup press SETUP 27
13. cuna ore ae e aa be os ro a LATI 23 OPTIONAL SETTINGS oo iii eto ee mo a 23 SETUP SCREEN ss a eee ee eee a eee de oeil 23 PICTURE ADJUSTMENT cocer cd doce RI ek a Dinan hoe nec ee eb eee eS 24 CLOSED CAPTION ce 6 A632 i Rae ea ee eek ee Oe RR 25 DIV CLOSED GAPTION ccciacd awaeded oe ee biennali 26 CLOSED CAPTION STYLE 0 00 eee a eee 26 V CHIP preg e ne te se Ss ae ds es a Se Er Sr ee Ps daras ee ee 28 HDMI AUDIO ceras rete seta oras tes Oe OER a COO OO e ER a a 30 ATTACHING A WALL MOUNT BRACKET SOLD SEPARATELY 31 MISCELLANEOUS 660 aa acacia dr is ici tue a bear au a wa wR we 32 TROUBLESHOOTING GUIDE s sea ou 3 ee La Se eS ok EES EROS ES RTLA tt 32 GLOSSARI ronda Bee ert RAG Oe aa eae ae eae Be da Boh ol a ee a BA aa 36 MAINTENANCE sarera acres apa ee ee ee ie ee eee a 36 SPECIFICATIONS 0 a 6 ane e uae se hw ow wm wee a ee a 37 WARRANTY LL Back cover SYMBOLS USED IN THIS MANUAL The following is the description for the symbols used in this manual Settings only for the analog mode Settings only for the digital mode e If there is no symbol under the function heading those are common settings for the analog mode and digital mode EN SUPPLIED ACCESSORIES FEATURES CONTENTS Funcrions REMOTE CONTROL CONTROL AND REAR PANEL FUNCTION SLEEP button p23 INPUT SELECT button p20 Press to activate the sleep timer Press to access connected external devices like a
14. m Approximately 5 5 yds 5 m control Make sure the TV is positioned in a place which minimizes interference from o Approximately them o 7 6 yds 7 m 7 a EN PREPARATION FOR USE CONNECTION This section describes how to connect your TV to an antenna cable box etc MAKE SURE YOU HAVE AN ANTENNA As DTV is only available over the air you need an antenna to receive a digital signal NOTE e Be sure your antenna or other source is connected properly before plugging in the power cord ANTENNA CABLE CONNECTION 1 When connecting your TV to an antenna Connect the Coaxial cable on your home outlet to the ANT IN jack of this TV 2 When connecting TV to cable TV company without box Connect the Coaxial cable on your home outlet to the ANT IN jack of this TV VHF UHF Rear of this TV antenna 3 FE 0 00000000 O Coaxial cable not included 00000000 Coaxial cable Cable TV not included company Once connections are completed turn on the TV and begin initial setup Channel scanning is necessary for the TV to memorize all available channels in your area Refer to INITIAL SETUP on page 13 NOTES e For your safety and to avoid damage to equipment please unplug the coaxial cable from the ANT IN jack bef
15. please wait An l Analog channels Digital channels e When scanning has completed the lowest memorized channel will be displayed NOTES e If you do not operate your TV for more than 45 seconds dur ing the initial setup the message boxes start to move to the lower left hand corner of the screen to prevent burn in This is to save your screen from burn in Press any key except POWER to cancel it e The initial Autoscan function can be executed for either Air or Cable only once When you change the connection Air Cable set the Autoscan again Refer to page 14 e If you connect a cable system directly contact the CATV installer e When the scanning is not completed Helpful Hint will be displayed every time you turn on the power If you have previously registered channels when this screen appears you can select a channel with the Number buttons No channel is registered Press and hold ENTER key for 3 seconds Contact support hotline provided on manual or back of unit Sin canal registrado Mantenga oprimida la tecla ENTER durante 3 segundos Llame tel fono de apoyo en manual o atr s de TV Pas de cha ne consign Maintenir la touche ENTER press e 3 secondes Contacter numero d urgence dans manuel ou arri re appareil Toll free customer support line can be found on the cover of this manual PREPARATION FOR USE INITIAL SETTINGS 13 14 ChanneL SETTINGS AUTOSCA
16. CR Audio cable not included DIGITAL AUDIO CONNECTION If you connect this TV to an external digital audio device you can enjoy multi channel audio like 5 1ch digital broadcasting sound Required digital audio coaxial cable not included Rear of this TV To coaxial digital ANT IN HDMI audio input jack o a o AUDIO OUT AUDIO COAXIAL Od Or DIGITAL HDMI IN AUDIO OUT cosi O RO Or E To DIGITAL AUDIO a OUT jack Dolby Digital decoder Digital audio coaxial cable not included Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 11 EN 12 ANALOG AUDIO CONNECTION If you connect this TV to an external analog audio device you can enjoy stereophonic 2 channel audio sound Required audio cable not included HDMI IN E oO D O O Stereo system To AUDIO OUT jacks Rear of this TV Audio cable not included CONNECTING THE POWER CABLE Connect the power cord included to the TV before connecting it to the power source 1 Connect the power cable to this TV first CAUTION eee e Do not connect the power cable to a power supply outside the indicated voltage of this TV AC 120V Connecting the power cable to a power supply outside of this range may result in 2 Connect the power cable to an AC outlet fire or electrical shocks e Always use the power cable included with t
17. DEO1 or S VIDEO1 input jack Video1 MENTES a Tv PG DLSV eg 2 When using VIDEO2 or S VIDEO2 input jack Video2 sn ay TV PG DLSV EG 3 When using COMPONENT input jacks Componenti RECETTES STIONE 4 When using COMPONENT input jacks Component2 m Ap amp NONE 5 When using HDMI IN jack HDMI stente a NONE CHANGING THE SCREEN DISPLAY MODE Each of 4 display modes can be selected in either 4 3 or 16 9 aspect ratios 1 Press SCREEN MODE to switch the TV aspect ratio 2 Press SCREEN MODE repeatedly until the normal screen displays MODE NOTES O e Some programs may not offer all display mode options e By changing the screen display mode from time to time you can reduce burn in on screen When the broadcast is sending 4 3 video When the broadcast is sending 16 9 video signal signal Sidebar n Full NY ya ya y Le MY Wide WZ Expand Cinema Sidebar Full Sidebar displays a 4 3 picture at its standard A picture is displayed at 16 9 size as it is 4 3 size Sidebars will be displayed on the right Zoom and left edges of the screen Zoom displays a 16 9 picture without changing Full its horizontal and vertical ratio at its maximum Full displays a 4 3 picture at a 16 9 size with size horizontal elongation necessary to fill the Cinema screen Cinema displays a 16 9 picture with vertical Cinema elongation Cinema displays a 4 3 picture at a 16 9 siz
18. L and press ENTER to con firm e Using A F select Antenna Channel 2 EXIT autoscan Channel List FSA PicTURE Manual Register FA CHANNEL Antenna a DETAIL E LANGUAGE e Press ENTER e Using the Number buttons or CH A V select the channel for which you want to check signal strength 16 EN e If the channel is set to external input you can not confirm the antenna situation Antenna gt EXIT E LANGUAGE 3 To exit the setup press SETUP LANGUAGE SELECTION You can choose English Spanish or French as your on screen language SETUP e gt lt gt 1 Display the setup screen Press SETUP The following setup screen appears 2 Select LANGUAGE and press ENTER to con firm e Using A V select English Espa ol or Francais Language E 7B EXIT Select the language for setup display 2 PICTURE ri Si Elija idioma de preparacion E CHANNEL S lectionner langue cran config rancais a DETAIL A LANGUAGE e Press ENTER 3 To exit the setup press SETUP SETTING THE PANEL SAVER Panel saver prevents the display from being etched by an unchanging image You can specify a setting for it SETUP 0 DI 1 Display the setup screen e Press SETUP The following setup screen appears CHANNEL SETTINGS Y EXIT ax PICTURE CHANNEL
19. N With AUTOSCAN your TV automatically scans and memorizes your area s viewable channels Activate AUTOSCAN when you turn on your TV for the first time change broadcast sources e g from antenna to CATV or move your TV to a different broadcast area SETUP 0 2 CD NOTE e Make sure the TV is connected to antenna or cable 1 Display the setup screen e Press SETUP The following setup screen appears DIS FSR PICTURE PA CHANNEL Mi DETAIL HA LANGUAGE 2 Select CHANNEL and press ENTER to con firm e Using A F select Autoscan Channel ED EXIT Autoscan a Channel List FS1 PICTURE Manual Register A crame Antenna Ta DETAIL EACH Press ENTER EN 3 For TV channels using A V select Air For CATV channels select Cable MAUtOSCAN E EXIT Autoscan will rescan all channels This may take a while to complete FS PICTURE Select the destination of ANT IN jack Ta peras fune B CHANNEL e Press ENTER Scanning and memorizing the channels auto matically starts AMI Now the system is scanning for channels please wait Analog channels Digital channels SETUP Exit e When the scanning and memorizing are com pleted the lowest memorized channel in the broadcasting will be displayed NOTES e If you do not operate this TV for more than 45 seconds during initial setup the message boxes sta
20. OMPONENT2 and AUDIO rom underneath S Video HE and audio jacks COMPONENTI and AUDIO VIDEO cable connec Component cable connection jacks tion for external video for external audio video Component cable connection for equipment devices Use component and external audio video devices audio out jacks of external Use component and audio out device jacks of external device INSTALLING THE BATTERIES Install two AA batteries included matching the polarity indicated inside battery compartment of the remote control BATTERY PRECAUTIONS Be sure to follow the correct polarity as indicated in the battery compartment Reversed batteries may cause damage to the device e Do not mix different types of batteries together e g Alkaline and Carbon Zinc or old batteries with fresh ones e If the device is not to be used for a long period of time remove the batteries to prevent damage or injury from possible battery leakage e Do not try to recharge batteries not intended to be recharged they can overheat and rupture REMOTE CONTROL RANGE Operate the remote control within a 30 degree angle on both sides of the infrared sensor on the main unit You can operate the remote control from a distance of several yards away from the main unit NOTE ZX e Other devices which use infrared beams gua cupa sunlight fluorescent lights etc may affect PHARES egies AEE IENISSE the range and effectiveness of the remote Approximately 5 5 yds 5
21. OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN CANADA ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED IN TO AN AUTHORIZED SERVICE CENTER THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT IF NO PROOF OF PURCHASE IS ATTACHED THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED ATTENTION FUNAI CORP RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS To obtain warranty service you must take the product or deliver the product freight prepaid in either its original packaging or packaging affording an equal degree of protection to any AUTHORIZED SERVICE CENTER FUNAI CORP will not reimburse you for any service done by unauthorized service providers without prior written approval To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries please contact to us at FUNAI CORPORATION Customer Service Tel 1 800 474 0045 http www funai corp com 19900 Van Ness Avenue Torrance CA 90501 Printed in Malaysia LO703CD L0701CB 1EMN22014A Ak e Some cables here are not included with the plasma display TV e Certains des
22. Other is displayed when the audio language cannot be acquired or the acquired languages are other than English Spanish or French Channel number 6 Effective scanning lines and scan mode 7 Program definition 8 9 Program rating 10 CC Not available if the CC set to Off 1 2 4 Buffy Vampire Slayer HDTV Program aspect ratio A quarter century ago which may now qualify as the 5 good old days of newspapering run of paper sales accounted for 80 percent of the industry s advertising revenues Department stores and supermarket were 3 9 10 NOTES e When the program guide is displayed in more than 4 lines use A V to scroll e No description provided is displayed when the program guide is not provided e The following screen is displayed when con necting to external devices e g When using VIDEO1 input jack for con nection Video Zep eD A TV PG DLSV CC SLEEP TIMER The Sleep Timer can be set to automatically turn off your television after an incremental period of time SLEEP 1 Press SLEEP on the remote control to set the Sleep Timer e The setting display for Sleep Timer is shown on the screen Sleep Off 2 You can set your TV to turn off after a set period of time from 10 to 90 minutes After set up you can display the remaining time before shut off by pressing SLEEP again e To cancel the sleep timer press SLEEP
23. Y TO THE ORIGINAL RETAIL PURCHASER A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY This warranty shall not be extended to any other person or transferee This warranty is void and of no effect if any serial numbers on the product are altered replaced defaced missing or if service was attempted by an unauthorized service center This limited warranty does not apply to any product not purchased and used in CANADA This warranty only covers failures due to defects in material or workmanship which occurs during normal use It does not cover damage which occurs in shipment or failures which are caused by repairs alterations or product not supplied by FUNAI CORP or damage which results from accident misuse abuse mishandling misapplication alteration faulty installation improper maintenance commercial use such as hotel rental or office use of this product or damage which results from fire flood lightning or other acts of God THIS WARRANTY DOES NOT COVER PACKING MATERIALS ANY ACCESSORIES EXCEPT REMOTE CONTROL ANY COSMETIC PARTS COMPLETE ASSEMBLY PARTS DEMO OR FLOOR MODELS FUNAI CORP AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESS
24. asma Display TV rear side Arri re du t l viseur cran plasma ANT IN AUDIO OUT AUDIO L L DIGITAL 00 rosa nO LO HDMI IN CONNEXION A COMPOSANTES DVD Player With Component Video Out Jack Lecteur DVD avec prises de sortie vid o a composantes Plasma Display TV rear side Arri re du t l viseur cran plasma COMPONENTI COMPONENT VIDEO OUT Y Cb Pb Cr Pr Plasma Display TV side view C te du t l viseur cran plasma Camcorder CAM SCOPE DVD Player VCR Plasma Display TV rear side Arri re du t l viseur cran plasma LECTEUR DVD MAGN TOSCOPE a voi FOR MORE INFORMATION POUR PLUS D INFORMATIONS 1 Owner s Manual Mode d emploi 2 http www funai corp com 3 1 800 474 0045 1EMN22015A Printed in Malaysia LO703CD LO701CB XX xk
25. casting station e When the outside antenna is used check the wire condition and connection e Electrical interference from nearby appliances may affect picture quality e When the outside antenna is used check the wire condition and connection e Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broadcasting station e Move your TV away from nearby electric appliances Turn off the power and wait 30 minutes before turning it back on e View other TV channels The problem might be limited to the broadcasting station e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condition and connection e Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broadcasting station e Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broadcasting station Do not continuously display images such as video games com puter graphics stock market quotations or other fixed patterns Those images may cause screen burn in If burn in occurs display a movie or TV show to reduce the problem These images can cause permanent damage to your screen Burn in caused by misuse is not covered by your warranty e Make sure Autoscan has
26. ds e Press MUTE again or VOL A V VOLUME AJV to release the Mute status Press AUDIO to cycle through available audio STILL MODE i di 9 You can freeze the image shown on the screen When the broadcasting has all audio ASS MOTS L_ romm When the broadcasting has stereo audio and monaural audio STEREO MONO STEREO When the broadcasting has SAP and monaural audio STILL 1 Pause the image e When you press STILL the image shown on the screen is paused gt bla Er Suna T stin O Lu When the broadcasting is having only monaural Z audio T e The audio is not paused and keeps on reading MONO O out lt x e If the digital signal is gone or protected the cannot be switched image will remain paused and the audio will be STEREO Outputs stereo audio muted SAP Outputs second audio program e The Still function will be released after 5 MONO Outputs mono audio minutes DTV 2 li ill function aan p S E bdb When you press AUDIO the currently selected SI O ati e a ES language and the number of available languages any button while Still function is working l will be displayed on the screen NOTE ec English 1 3 SELECTING AUDIO CHANNELS Press AUDIO to cycle through available audio languages This section describes how to switch the audio in English 1 3 Spanish 2 3 the analog mode and how to switch the audio lan uage in the digital mode ibis n
27. duct may be found on the back of the TV No others have the same serial num ber as yours You should record the number and other vital information here and retain this book as a perma nent record of your purchase to aid identification in case of theft Model No Date of Purchase Serial No Dealer Phone No Dealer Purchase from Dealer Address A NOTE ABOUT RECYCLING This product s packaging materials are recyclable and can be reused Please dispose of any materials in accordance with your local recycling regulations Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula tions concerning chemical wastes When moving this TV Optional Accessories Due to the weight of this TV two people should be To mount the TV on a wall the following accessory used when moving it Both people should make sure is needed to grasp the top of the TV with one hand and the base of the TV with the other hand as in the follow VISIONMOUNT Flat Panel TV Wall Mount from ing illustration SANUS SYSTEMS for large flat panel televisions 32 to 60 Refer to page 31 for mounting the TV NOTE e The wall mounts are not supplied with the TV CAUTION e This TV is for use only with the Sanus Systems Model VMPL Wall Mount Use with other wall mounts may result in insta bility causing possible injury e When mounting the TV with the Sanus Systems wall mount make sure to mou
28. e Expand with less horizontal elongation necessary to fill Expand displays a 16 9 picture with horizontal the screen because a little bit of the top and elongation bottom edge of the screen will be cut off Wide Wide displays the center of the picture as original size and the outer sides of the picture will be elongated The size of the picture will depend on the original signal EN WATCHING TV SCREEN INFORMATION You can display the currently selected channel or other information such as the audio mode on the screen BACK lt gt INFO In the analog mode the current channel and the audio mode are displayed 1 Display the channel number and the audio mode e Press INFO on the remote control The current channel number audio mode type of resolutions for video signal TV aspect ratio CC and TV rating are displayed at the top right of the screen en SAP STEREO A TV PG DLSV CC e To clear the display press BACK or INFO again 22 EN DTV In the digital mode the detailed information for the current channel such as the Program guide is dis played 1 Display the detailed information for the channel e Press INFO on the remote control The currently selected program details are dis played on the screen e The following information is displayed 1 Program title 2 2 Broadcast station 3 Program guide max 4 lines displayed 4 5 4 5 Audio language
29. e customer support line found on the cover of this manual to locate an authorized service center EN IR SIGNAL CHECK If the remote control isn t working properly you can use an AM radio or digital camera including a cellu lar phone with built in camera to see if it is sending out an infrared signal e With an AM radio Tune the AM radio station to a non broadcasting frequency Point the remote control towards it push any button and listen If the sound from the radio flutters it is receiving the remote controls infrared signal e With a digital camera including built in cell phone cameras Point a digital camera towards the remote control Push any button on the remote control and look through the digital camera If the infrared light appears through the camera the remote control is working Specirications GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATION Television System ATSC Sound Output 5W 8 ohm x 4 NTSC M TV Standard OTHER SPECIFICATIONS Closed Caption System 15 119 FCC Analog CC 15 122 FCC Digital CC Remote Control Digital encoded infrared light system Operating Channel Coverage ATSC NTSC Temperature 5 C to 40 C VHF 2 da 13 o o UHF 14 69 41 F to 104 F Power Requirements AC120V 60Hz CATV 2 13 A W p ower Consumption W 1 W 94 Maximum 400W A 5 nia A 1 5A Il Plasma panel 42 XGA panel Tuni
30. ease contrast lt To decrease contrast gt To increase contrast Contrast 60 a Color Using 4 gt adjust to be brilliant or pale color lt To pale gt To brilliant Tint Using lt 4 B gt adjust to obtain natural skin tones lt To red gt To green Sharpness Using lt gt adjust the detail of the picture lt To soft gt To clear Sharpness 0 Reset Settings Using A V select Reset You can reset setting of the Picture Mode you select CEE EE ECOS Color Temp Using A V adjust Color Temperature from the selec tion then press ENTER Cool Neutral and Warm Picture E a Picture Mode E Fea PicTURE re E CHANNEL DETAIL 2 LANGUAGE e The adjustment bar for picture quality item is displayed on the screen NOTE e To move to the normal screen press SETUP 4 To exit the setup press SETUP CLOSED CAPTION You can view closed captioning cc for TV pro grams movies news and prerecorded tapes Closed captions refer to text of dialogue or descrip tions displayed on screen for the hearing impaired SETUP 0 D D gt 1 Display the setup screen e Press SETUP The following setup screen appears gt EXIT FA PICTURE Ei CHANNEL a DETAIL Y LANGUAGE 2 Select DETAIL and press ENTER to confirm e Using A F select Closed Caption and press ENTER to confi
31. ecoder This TV contains the built in Closed Caption Decoder that displays text across the screen lt allows you to read the dialogue of a TV program or other information in the Closed Caption supported programs e MTS SAP Tuner This feature allows you to select with the remote control your desired audio language e Auto Shut Off Function If there is no signal input from the antenna terminal and no operation for 15 minutes the unit will turn itself off automatically e Choices for On Screen Menu Language Select your setup menu language English Spanish or French e Stereo Sound Function e Full Function Remote Control PLL Frequency Synthesized Tuning e HDMI Input This TV accepts 480i 480p 720p 1080i video signals and 32kHz 44 1kHz 48kHz audio signals e Component VIDEO Input This TV accepts 480i 480p 720p 10801 video signals e S VIDEO Input e AV Input e Analog Audio Output e Digital Audio Output Coaxial e Resume This feature will automatically memorize settings if a power failure occurs EN Contents IMPORTANT SAFETY INSTRUCTIONS 0 0 000 eee ee eee eee 2 PRECAUTIONS 242 8 sen dee ns an nl SEER SES eee EES RCE eee ee a 3 SUPPLIED ACCESSORIES celle a da ah ee e ORE eh ee ca RSS A Shek E Gaves 4 FEATURES eme mme ee ee nee eee eee nes 4 FUNCTIONS eee 6 REMOTE CONTROL FRONT AND REAR PANEL FUNCTION 6 INSTALLING THE BATTERIES 0 cee
32. ee ee ee ee ee ees 7 BATTERY PRECAUTIONS es se ere 7 REMOTE CONTROL RANGE 35 44 cuacuusse msn te cannes a a e aa 7 PREPARATION FOR USE oo 8 CONNECTION alfieri Bede a ee ee a ES ene Pees eee ene Ee eee adi ae 8 ANTENNA CABLE CONNECTION i da AR a a 8 CONNECTION TO CABLE SATELLITE BOX i 8 CONNECTING OTHER DEVICES 0 ce ee ee eee eee ees 9 HDMI AA 9 COMPONENT CABLE CONNECTION 0002 ee eee ee eee ee eee eae 10 S VIDEO CABLE CONNECTION x il Berke AR ee a OE ta wR Se ee ews 10 VIDEO CONNECTION 2 lil we e ee a Gwe ee 11 DIGITAL AUDIO CONNECTION 11 ANALOG AUDIO CONNECTION eee 12 CONNECTING THE POWER CABLE eee 12 INITIAL SETTINGS es 13 INITIAL SETUP a a a meme eee meme 13 CHANNEL SETTINGS nan ees 14 AUTOSCAN eee eee meme meer 14 Sa ANA 15 MANUAL REGISTER cc c ce eue cures 15 ANTENNA CONFIRMATION caschi Gg 4 a a a ER 16 LANGUAGE SELECTION 2 2 at darai ese 17 SETTING THE PANEL SAVER 17 WATCHING TV aio a a oh ee ie e A E Sey a ci mi 18 CHANNEL SELECTION 1 ii RATA RETTILI RTLA eR ORS ES 18 VOLUME ADJUSTMENT si ia DERE Ei 18 SHLLE MODE ee a eee oe osa D don de oe Pe di one di dde oe 19 SELECTING AUDIO CHANNELS 19 ACCESSING EXTERNAL DEVICES 0 cee ee ee ee ee eee eee nes 20 CHANGING THE SCREEN DISPLAY MODE 21 SCREEN INFORMATION ele le ba sat rra ara ni 22 SLEEP TIMER 6 au bed obs bi
33. el NOTE e In DTV broadcasting one channel sometimes broadcasts multiple programs depending on the air time In this case the main channel is called major channel and the minor channel is called minor channel About minor channel broadcasting There may be different programs being broad cast on minor channels through a single chan nel from ATSC You can watch each minor channel program being broadcast by selecting one of the minor channels NTSC 18 00 Er CH4 No signal 18 30 ee e CH4 2 CH4 3 CH4 19 00 CH4 2 AT 20 00 gt change automatically gt change manually by pressing CHA v on your remote control NOTE e No Signal will appear on the screen after the minor channel broadcast is over You will need to change the channel to continue watching another TV program VOLUME ADJUSTMENT This section describes how to adjust the volume The mute function which turns the sound off and on will also be described MUTE VOL A V e Use VOL A V to adjust the audio volume e The same operation is available with VOLUME A V on the control panel of the main unit e The volume bar will be displayed at the bottom of the screen when adjusting the volume Volume 20 a e The volume bar display will automatically dis appear in a few seconds MUTE e Press MUTE to turn off and on the sound e Mute is displayed on the screen for a few sec on
34. elect the desired DTV Closed Caption then press ENTER Off Select if you do not want DTV CC This is the default Service 1 to Service 6 Select one of these before changing any other item in the Closed Caption menu Choose Service 1 under normal circumstances 5 To exit the setup press SETUP 26 EN CLOSED CAPTION STYLE 1 Display the setup screen Press SETUP The following setup screen appears EXIT PICTURE DO fil CHANNEL El HA l DETAIL E LANGUAGE 2 Select DETAIL and press ENTER to confirm e Using A F select Closed Caption and press ENTER to confirm Detail Closed Caption V chip HDMI Audio Panel Saver 3 Select CC Style and press ENTER to confirm Closed Caption cc Style User Setting Edge Type e Using A V select the desired Closed Caption Style 5 Use User Setting e The User Setting function lets you change CC style e Using A V select User Setting Press ENTER and set User Setting to On Sen REC E E CHANNEL Ta DETAIL as Bacl aci EZ LANGUAGE 6 Set each item e When User Setting is set to On you can set the following items e CC style set by User Setting will be displayed e Using A F select the item you want to set e You can switch the setting for each item with A V Picture display ABCDEFGHIJKL Edge Edge C
35. f HDMI Licensing LLC 9 EN COMPONENT CABLE CONNECTION Offers better picture quality for video devices connected to your TV Use a component video cable not included to connect your TV to external video devices equipped with component video jacks If you connect to your TV s COMPONENT input jack connect audio cables to the AUDIO L R jacks of COM PONENT If you connect to your TV s COMPONENT2 input jack connect audio cables to the AUDIO L R jacks of COM PONENT2 Component video cable not included To component video output jacks COMPONENT COMPONENT I 10 LES L AUDIO OUT L o plo R L AUDIO 00 OO OCIO O To AUDIO Rear of this TV input jacks To COMPONENTI input jacks COMPONENT VIDEO OUT Pb Y Pr ir gt gt voeo DVD Player with the component video output jacks To audio output jacks Audio cable not included NOTE e This TV accepts 480i 480p 720p 1080i video signals S VIDEO CABLE CONNECTION Offers good picture quality for video devices connected to your TV Use an S video cable not included to connect your TV to external video devices equipped with S video con nectors If you connect to your TV s S VIDEO1 input jack connect audio cables to the AUDIO L R jacks of VIDEO1 If you connect to your TV s S VIDEO2 inp
36. his TV Do not use any other cable For safety make sure to always connect the power cable to a three pronged AC outlet EN NITIAL SETTINGS INITIAL SETUP This section will guide you through your TV s initial set up which includes selecting a language for your on screen menu and AUTOSCAN which automati cally scans and memorizes viewable channels 1 After making all the necessary connections turn on your TV 2 Press POWER Initial Setup menu will appear e This operation may take a few moments e If Initial Setup menu does not appear press and hold ENTER for 3 seconds initial setup will appear then proceed to step 3 e If initial set up has already been completed refer to LANGUAGE SELECTION on page 17 3 When you first turn on your TV the following screen is displayed Use A W to select the on screen menu language from the choices on the right side of the screen Initial Setup a English Espa ol Select the language for setup display Elija idioma de preparaci n S lectionner langue cran config Francais The Antenna Confirmation menu on step 4 will be displayed in the selected language after you press ENTER 4 Select source of ANT IN jack using A W press ENTER Initial Setup Air Cable Make sure the antenna is connected to ANT IN jack Select the destination of ANT IN jack Initial Setup Now the system is scanning for channels
37. isplay for more than 60 seconds may cause lingering images to remain on the screen These images will automatically disap pear but may take time depending on the luminance of the images and how long they were displayed on the screen ANT IN jack AUDIO OUT jacks Coaxial cable connection for your Audio cable connection for external antenna or cable box from underneath audio equipment Use AUDIO IN jacks DIGITAL AUDIO OUT ECS ai of external equipment COAXIAL jack AUDIO OUT AUDIO HDMI IN jack DIGITAL Digital audio coaxial Ji HDMI cable connection for external D cable connection for hol a Or E video equipment i e DVD recorder O decoder or audio AUDIO jacks for DVI con 5 receiver Connect by side Rear of this TV nection gt OR ae a MW o Audio cable connection for r sari ee F LA demi external audio video nie en Saree e a devices with DVI jack Use A AUDIO OUT jacks of exter aa ae nal equipment when using S VIDEO2 ead audio cable slime conversion connection for external Sena equipment VIDEO1 and AUDIO woe jacks S VIDEO2 jack Video and audio cable S Video cable and audio connection for external VIDEO2 cable connection for o Quo equipment external video equipment gt S VIDEO1 jack C
38. ive Dialogue NOTES e When you select a rating and set it to Block the higher ratings will be blocked automatically The lower ratings will be available for viewing e When you set TV MA to View all ratings turn to View automatically OPTIONAL SETTINGS 29 EN New Password 4 Display the New Password screen e Using A V select New Password V Chip ED Es MPAA Rating E PICTURE WEEWE New Password E CHANNEL Ta DETAIL EA LANGUAGE e Press ENTER 5 Change the password e Use the Number buttons on the remote con trol and enter the NEW 4 digit password e Enter password again in Confirm password space iau Enter password E E CHANNEL Confirm password Ta DETAIL E LANGUAGE eee BACK HE PIN Code Back 6 To exit the setup press SETUP NOTES e Make sure to enter the exact same new password as the Confirm password If they are different the space is cleared for reentering e Your password will be erased and return to the default 0000 when a power failure occurs or when you turn off the power using a wall switch If you forget the password unplug the power cord for 10 seconds to restore the pass word to 0000 30 EN HDMI AUDIO Set the method of sound input for HDMI jack PTS 1 Display the setup screen Press SETUP The following setup screen is displayed 5 EXIT Sm PICTURE E CHANNEL
39. k a EX O ANT IN HDMI UL I AiO oun Arno n 70m LO OL E To HDMI output jack DIGITAL HDMI IN E DVD Player with the HDMI output jack COAXIAL RO Or EY lt QO LLI Rear of this TV De NOTES e This TV accepts 480i 480p 720p 1080i video signals and 32kHz 44 1kHz 48kHz audio signals e This TV accepts only 2 channel audio signal LPCM e You need to select PCM for the digital audio output of the device you connect or the HDMI audio setting Audio sometimes makes no sound if you select Bitstream etc e This TV only accepts signals corresponding ElA861 2 When your video device has a DVI output jack connect the HDMI conversion cable not included from the DVI output jack HDMI DVI conversion cable not included To DVI output jack To HDMI IN jack ANT IN alt A 5 AUDIO OUT a i Cable Box or Satellite Box R L Te Sti with the DVI output jack COAXIAL 2 AMI R gt To audio z output jacks To AUDIO Rear of this TV input jacks Audio cable not included NOTES e This TV accepts 480i 480p 720p 1080i video signals e An HDMI conversion cable requires a separate audio cable connection as well e Audio signals are converted from digital to analog if you make the connection in paragraph 2 above e DVI does not show image if the 480i does not accept EIA CEA 861 861B HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks o
40. l mount kit 2 indicates the position of the screw holes on the TV OPTIONAL SETTINGS ATTACHING A WALL MOUNT BRACKET SOLD SEPARATELY MisceLLaneous TROUBLESHOOTING GUIDE Before calling for service please refer to the following information No power Be sure the power cord is connected to outlet e If a power failure occurs unplug the power cord for 30 minutes to allow the unit to reset itself No picture or sound e Check if the power is on e Check the outlet connection e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condition and connection e View other TV channels The problem might be limited to the broadcasting station e Turn off the power and wait for about 1 minute then turn it on again No color e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condition and connection e View other TV channels The problem might be limited to the broadcasting station e Adjust the Color in the setup screen Sound OK picture poor e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condition and connection e Electrical interference from nearby appliances may affect picture quality e Adjust Contrast and Brightness in the setup screen e View other TV channels The problem might be limited to the broadcasting station Picture distor
41. l radiation Depending on the screen contents in rare cases this contents may cause vertical stripes to appear because of failure to light Please note that this is not a malfunction 39 EN 36 GLOSSARY ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards Aspect ratio The width of a TV screen relative to its height Conventional TVs are 4 3 in other words the screen is almost square widescreen mod els are 16 9 the screen is almost twice as wide as its height Component video This is a video signal format that conveys each of three principal colors of light red blue and green through different signal lines This allows the viewers to experience picture colors as origi nal as it is There are several sig nal formats including Y Pb Pr and Y Cb Cr Dolby Digital The system developed by Dolby Laboratories to compress digital sound It offers stereo sound 2ch or multi channel audio MAINTENANCE HDMI High Definition Multimedia Interface Interface that supports all uncom pressed digital audio video formats including set top box DVD player or digital television over a single cable High Definition TV HDTV Ultimate digital format that produces high resolution and high picture quality LPCM Linear Pulse Code Modulation LPCM is a format that can have up to 8 channels of audio It is mainly used i
42. le wire or loose connection Confirm that the cable wire is properly connected e SNOW If your receiver is located in the fringe area of a television station where the signal is weak your picture may be marred by the appearance of small dots When the signal is extremely weak it may be necessary to install a special antenna to improve the picture Snowing occurring when the TV is connected to a cable TV system may indicate a bad cable wire or loose connection Confirm that the cable wire is properly connected e RADIO FREQUENCY INTERFERENCE The interference produces moving ripples or diagonal streaks and in some cases causes loss of contrast in the picture e PREVENTION OF AN OBSTACLE TO RADIO RECEIVERS This TV has been designed pursuant to the FCC class B Rules This is to prevent a problem to Radio receivers If this TV causes a problem to Radio receivers then take the following steps Keep the monitor away from Radio Adjust Radio antennas in order for the TV not to receive interference The antenna cable of Radio should be kept away from the TV Use a coaxial cable for antenna You can check if this TV influences Radio receivers by turning off all other equipment other than the TV If you find a problem receiving Radio when using the TV check the instructions mentioned above MISCELLANEOUS Vertical stripes appear e The plasma display panel is lighting the phosphors by the discharge of depending on the screen interna
43. mo TAIL Eq LANGUAGE 2 Select DETAIL and press ENTER to confirm e Using A V select Panel Saver and press ENTER to confirm Ta DETAIL y LANGUAGE 3 Switch the Panel Saver mode e Using A F select Strong Weak or Off and press ENTER to confirm burn in reduction of the display panel by shifting the picture e Weak moves 1 pixel every 5 minutes and Strong moves 1 pixel every minute This prevents burn in 4 To exit the setup press SETUP 17 EN W arcHinc TV CHANNEL SELECTION Select channels by pressing CH 4 w found on remote control or on the TV s control panel or by pressing the Number buttons found on the remote control 18 EN CH RETURN CH A V e Use CH A W to change the channel e Same operation is also available with CHANNEL A V on the control panel of the main unit the Number buttons e Press the channel number with the Number buttons to select a channel you want to watch then press ENTER When selecting analog channel 12 0 0 When selecting digital channel 12 1 Be sure to press before entering the minor channel number 0 0 0 0 9 e If the channel broadcasts NTSC and ATSC both and you don t press you will receive the NTSC channel only The moment you press the lowest memorized digital channel will be dis played e Press CH RETURN to return to the previously viewed chann
44. n exposed to rain or moisture does not operate normally or has been dropped 15 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture e ES AUD S3126A ls PRECAUTIONS e Place your TV in a room with adequate ventilation e Keep your TV set away from sources of direct heat such as heat registers or direct sunlight e Do not place your TV on soft surfaces such as rugs or blankets e Leave enough room for air to circulate around the bottom top and back of the set FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical The serial number of this pro
45. n music production The format samples and captures analog signals and transforms them into digital signals without compressing the sound data NTSC Acronym that stands for National Television Systems Committee and the name of the current ana log broadcasting standards Password A stored 4 digit number that allows access to parental control features SAP Secondary Audio Program Second audio channel delivered separately from main audio chan nel This audio channel is used as an alternate in bilingual broad casting Standard Definition TV SDTV Standard digital format that is sim llar to the NTSC picture quality S Video Offers higher quality images by delivering each signal color c and luminance y independently of each other through separate cables CABINET CLEANING e Always unplug the TV from the AC outlet before cleaning e Clean the case of the TV with a soft cloth which has been wet and wrung dry e If the screen is dirty or dusty wipe it clean with a soft cloth NOTES e Never use a solvent alcohol or any other abrasive liquid to clean the TV e Always make sure the area around vents on the TV is clear and clean Failure to do this may result in fire or cause the TV to fail prematurely SERVICING Should your unit become inoperative do not try to correct the problem yourself There are no user ser viceable parts inside Turn off the TV unplug the power cord and call our toll fre
46. n up to date with the current TV screen dialogue Captions are displayed as a white e Interference from buildings or weather conditions may cause box captioning to be incomplete No caption is displayed in the Closed Broadcasting station may shorten the program to insert adver Caption supported program tisement The closed caption decoder cannot read the informa tion of the shortened program No caption is displayed when playing The videotape may be illegally copied or the caption signal the videotape containing captions might not have been read during copying Black box is displayed in the screen Text mode is selected for caption Select CC1 CC2 CC3 CC4 or Off 34 EN e IGNITION NOISE Black spots or horizontal streaks may appear picture may flutter or drift Usually caused by interference from automobile ignition systems neon lamps electrical drills and other electrical appliances GHOSTS Ghosts are caused by the television signal following two paths One is the direct path and the other is reflected from tall buildings hills or some other objects Changing the direction or position of the antenna may improve reception Ghosting may also be caused by defects in the antenna system such as unshielded leads or connecting several sets to the same antenna without using multiple antenna couplers Ghosting occurring when the TV is connected to a cable TV system may indicate a bad cab
47. ng System Channel frequency Di thesized tuning system Shi Ghannala i fd H 30 11 16 780mm annel Access n o eyboard W 41 1 2 1054mm Sa e scan D 13 330mm an Se Weight 92 4 Ibs 42 0kg Terminals Antenna Input VHF UHF CATV 75 ohm unbalanced F type S Video Input Mini DIN 4 pin jack x 2 Video Input RCA jack x 2 Audio Input RCA jack L R x 4 Component Video Audio Input 2 pin jacks Y 1Vpp 4 pin jacks Pb Pr 700mVpp 4 RCA jacks L R HDMI Audio Input HDMI jack 2 RCA jacks L R Coaxial Digital Audio Output 1 pin jack 500mVpp Analog Audio Output 2 RCA jacks L R Stereo Sound System Speaker MISCELLANEOUS SPECIFICATIONS e Designs and specifications are subject to change without notice and without our legal obligation e If there is a discrepancy between languages the default language will be English 37 EN ile technologies LIMITED WARRANTY FUNAI CORP will repair this product free of charge in CANADA in the event of defect in materials or workmanship as follows DURATION PARTS FUNAI CORP will provide parts to replace defective parts without charge for one 1 year from the date of original retail purchase Certain parts and LCD image burn in are not covered under this warranty LABOR FUNAI CORP will provide the labor without charge for a period of ninety 90 days from the date of original retail purchase LIMITS AND EXCLUSIONS THIS WARRANTY IS EXTENDED ONL
48. nly NC 17 No one under 17 admitted R Restricted under 17 requires accompanying parent or adult guardian Unsuitable for children under 13 Parental Guidance suggested General Audience No Rating NOTES e When you select a rating and set it to Block the higher ratings will be blocked automatically The lower ratings will be available for viewing e When you set X to View all ratings turn to View automatically TV Rating 4 Display the TV Rating screen e Using A F select TV Rating A CHANNEL SET Ef tancuace 5 Set TV Rating e Using A F select the rating e Press ENTER and set to View or Block for the rating without sub categories r V Chip D EXIT TE Picture E CHANNEL Ta DETAIL f A LANGUAGE e For the rating with sub categories press A V lt q gt and select the rating Then press ENTER and set to View or Block vene 2 EXIT igalPicture GENS Ti DETAIL EZTTE 6 To exit the setup press SETUP lt Selection gt TV MA TV 14 TV PG TV G TV Y7 lt Rating Category Explanations gt Mature audience only Unsuitable for children under 14 Parental Guidance suggested General Audience Appropriate for children 7 and older TV Y Appropriate for all children lt Selection gt lt Rating Sub Category Explanations gt Fantasy Violence Violence Sexual Situation Coarse Language Suggest
49. nt it on the wood studs inside the wall as failure to do so may result in instability causing possible injury e Refer to the instruction manual included with the wall mount for details when securing the TV to the wall EN IMPORTANT SAFETY INSTRUCTIONS PRECAUTIONS SUPPLIED ACCESSORIES e Owners Manual e Quick Set Up e Power Cable 1EMN22014A 1EMN22015A WBC0192LW001 e Batteries FAA X 2 e Remote control unit NFOO9UD SS e If you need to replace these accessories please refer to the PART NO with the illustrations and call our toll free customer support line found on the cover of this manual e Depending on your antenna system you may need different types of Combiners Mixers or Separator Splitters Contact your local electronics store for these items FEATURES e DTV TV CATV You can use your remote control to select channels which are broadcast in conventional analog standard definition and high definition formats Also cable subscribers can access their cable TV channels Program Information Display DTV only You can display the title contents and other information of the current DTV program on the screen e Autoscan This TV can automatically scan and memorize the channels receivable in your residential area This feature elimi nates the need of a difficult setting procedure e V CHIP This feature allows you to block children s access to inappropriate programs e Closed Caption D
50. olor and Edge Type Font Font Style Font Size Font Color and Font Opacity Back Back Color and Back Opacity e The setting description for each item is shown below Font Style Closed Captioning font style can be changed as below Closed Caption METE User Setting Font Style Fonto Font Size Font1 Font Color Font2 Font Opacity Font3 Back Color Font4 Back Opacity Font5 Edge Color Jont Edge Type FONT7 Font Size Font size of the displayed caption can be switched as below CC Style Closed Caption User Setting Font Style Font Size Large Middle Font Opacity Small Back Color Back Opacity Font Color Edge Color Edge Type Font Color Font color of the displayed caption can be switched as below CC Style Closed Caption E EXIT ea PICTURE User Setting Font Style White e Font Size Black Font Color Red Font Opacity Green Back Color Blue A CHANNEL Ta DETAIL Back Opacity Yellow EAS Edge Color Magenta MA Edge Type Cyan Font Opacity Font opacity of the displayed caption can be switched as below HET Closed Caption D EXIT User Setting Font Style O E _ Le Font Size 3 CHANNEL Font Opacity Font Color m DETAIL Back Color Back Opacity Y LANGUAGE Edge Color i Edge Type Back Color soia Flash Translucent Transparent Background
51. ore moving the unit e If you use an antenna in order to receive analog TV the same antenna generally will work for DTV reception Outdoor or attic antennas will be more effective than set top versions e To easily switch between antenna and cable wires you can purchase an Antenna Selector commercially available e If you connect a cable system directly contact the CATV installer CONNECTION TO CABLE SATELLITE BOX 1 Connect the coaxial cable on your home outlet to the input jack of the CABLE SATELLITE box 2 Use another coaxial cable to connect the ANT IN jack of your TV to the output jack of the CABLE SATEL LITE box Required cables in 2 and connecting methods differ depending on the CABLE SATELLITE box For more informa tion please contact your cable satellite provider EX Rear of this TV Satellite e dish Cable box or Satellite box 29 ol Ep Cable TV Coaxial cable L_N__UT f Coaxial cable company not included not included EN CONNECTING OTHER DEVICES HDMI 1 High Definition Multimedia Interface HDMI uses the latest technology to ensure the signal maintains the highest degree of integrity from source to TV Both video and audio travel through a single cable HDMI cable not included LL 0 To HDMI IN jac
52. pear on your TV e If the closed caption is not broadcasted nothing is dis played e The closed caption is not displayed when you use HDMI connection e When your TV receives a special effects playback signal i e Search Slow and Still from a VCR s video output channel CH3 or CH4 the TV may not display the correct caption or text e Captions and texts may not match the TV voice exactly e Interference may cause the closed caption system not to function properly OPTIONAL SETTINGS e The caption or text characters will not be displayed while the menu display or functions display is shown e If a black box appears on the screen this means that the TV is set to TEXT mode To clear screen select CAPTION GGT COS CCS C4 or Off 25 DTV CLOSED CAPTION Apart from closed captions DTV has its own closed captions called DTV CC Use this menu to change the settings for DTV CC 1 Display the setup screen e Press SETUP The following setup screen appears 2 Select DETAIL and press ENTER to confirm e Using A F select Closed Caption and press ENTER to confirm Pen rosea Caption E a A E CHANNEL Panel Saver Ta DETAIL EZ LANGUAGE 3 Select DTV CC and press ENTER to confirm Closed Caption Der Conventional CC Off DTVcc Off CC Style 4 Switch the DTV Closed Caption mode Closed Caption e Using A V s
53. rm D EXIT EE E ere pa DESE Panel Saver M pera ETS 3 Select Conventional CC and press ENTER to confirm Closed Caption Per ee Ea PIcTURE AA del E CHANNEL Te DETAIL Ez LANGUAGE 4 Select the Closed Caption mode Closed Caption Conventional CC DTV CC CC Style M eran E LANGUAGE e Using A V select the desired closed caption then press ENTER Caption Mode CC1 and Text1 are the primary caption and text services The captioning or text is displayed in the same language as the program s dialogue up to 4 lines of script on the screen where it does not obstruct relevant parts of the picture CC3 and Text3 serve as the preferred data channels The captioning or text is often a secondary lan guage translation simplified English or displayed at a slower rate CC2 CCA Text2 and Text4 are rarely available and broadcasters use them only in special conditions such as when CC1 and CC3 are not available or Text1 and Text3 are not available e There are three display modes according to programs Paint on mode Displays input characters on the screen immediately Pop on mode Once characters are stored in memory they are displayed all at once Roll up mode Displays the characters continu ously by scrolling max 4 lines 5 To exit the setup press SETUP NOTES e Closed captions must be broadcast or included in your recorded content to ap
54. rt to move to the lower left hand corner of the screen This is to save your screen from burn in Press any key except POWER to cancel it e If you connect a cable system directly contact the CATV installer e If you press POWER or SETUP during Autoscan this setting will be canceled e If there is no reception connected or a poor signal is detect ed a Hint will appear on screen once scanning stops CHANNEL LIST This function lets you remove undesired channels from the Channel Registration List SETUP Cc 1 Display the setup screen e Press SETUP The following setup screen appears 2 Select CHANNEL and press ENTER to con firm e Using A F select Channel List channel 2 AL Autoscan r Channel List Ea PICTURE anual Register Es CHANNEL Antenna Ta DETAIL EA LANGUAGE e Press ENTER 3 Select the channel you want to remove e Using A F select the channel Channel List _ ex ana Fea PICTURE Ch Up Down key selection Ez CHANNEL Tip pera Ed LANGUAGE e Press ENTER to highlight the channel select ed for removal You will not be able to select the channel again using CH A V e To reactivate the removed channel highlight it and press ENTER e When you remove a major channel you remove its minor channels too NOTE e The channel with DTV indicated on the display is ATSC otherwi
55. se the channel is NTSC 4 To exit the setup press SETUP MANUAL REGISTER This function lets you manually add channels not memorized due to poor broadcast strength during AUTOSCAN n ETUP O Cc 1 Display the setup screen e Press SETUP The following setup screen appears CHANNEL SETTINGS 2 Select CHANNEL and press ENTER to con firm e Using A F select Manual Register Channel ED EXIT Autoscan Channel List Feu PICTURE Manual Register Ei CHANNEL Antenna a DETAIL Z LANGUAGE e Press ENTER 3 Select the channel you want to add e Using the Number buttons select your desired channel ManuallRegister r L B Al or Analog channels egister select a channel to register a PICTURE using number keys For Digital channels you must perform Autoscan function zi CHANNEL a DETAIL Z LANGUAGE e Select Register with ENTER 4 To exit the setup press SETUP NOTES e If set up completes successfully Registered to the Channel List is displayed e If Video 1 is being used set up will not be completed suc cessfully and Unavailable will be displayed on the screen 15 EN ANTENNA CONFIRMATION Displays signal strength for each channel 1 Display the setup screen e Press SETUP The following setup screen appears 2 PICTURE E A a DETAIL 2 LANGUAGE 2 Select CHANNE
56. ted e When the outside antenna is used check the wire condition and connection e View other TV channels The problem might be limited to the broadcasting station Weak picture e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condition and connection e Adjust Contrast and Brightness in the setup screen e View other TV channels The problem might be limited to the broadcasting station Lines or streaks in picture e When the outside antenna is used check the wire condition and connection e Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broadcasting station Picture blurred e When the outside antenna is used check the wire condition and connection e View other TV channels The problem might be limited to the broadcasting station AED Ghosts in picture Bars on screen Picture rolls vertically Different color marks on screen Poor reception on some channels Picture OK sound poor Burn in on screen No reception of digital signals Channel changes automatically Remote Control doesn t work e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condition and connection e Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broad
57. than 45 seconds dur ing initial setup the message boxes start to move to the lower left hand corner of the screen This is to save your screen from burn in Press any key except POWER to can cel it WATCHING TV OPTIONAL SETTINGS 23 EN PICTURE ADJUSTMENT You can select from four default picture color set tings You can also adjust brightness contrast color tint sharpness and color temperature set tings DO 1 Display the setup sereen tt t S Display the setup screen e Press SETUP The following setup screen appears EXIT PICTURE ANNE i DETAIL 2 LANGUAGE 2 Select PICTURE and press ENTER to con firm e Using A V select your desired item and press ENTER to confirm Picture DdD a Gee Fea PicTURE ighin E CHANNEL a DETAIL EY LANGUAGE E 3 Adjust the picture quality e Using A F select the picture quality you want to adjust Picture Mode Using A V adjust Picture Mode from the selection then press ENTER Standard Dynamic Movie and News Picture E al Picture Mode Brightness A picrure 9 el E CHANNEL Tint ra DETAIL Sharpness E D Reset Settings E LANGUAGE a Color Temp Brightness Using lt gt adjust until the darkest parts of the picture are as bright as you prefer lt To decrease brightness gt To increase brightness EN Contrast Using lt gt adjust to increase or decr
58. ut jack connect audio cables to the AUDIO L R jacks of VIDEO2 Side of this TV To AUDIO input jacks I VE To S VIDEO2 input jack oli Se i S video cable not included To S VIDEO1 i input jack Hi _ Input jack VIDEO S VIDEO Tr OUT OUT COMPONENTI i O a am AUDIO To S video LO Ol o L Ale output jack AUDIO AUDIO RO rO DVD VCR with the S video output jack To audio output jacks Audio cable not included NOTE e If you connect to the S VIDEO jack and the VIDEO jack at the same time the S Video connection will have priority 10 EN VIDEO CONNECTION Offers standard picture quality for video devices connected to your TV When the audio jack of the video device is monaural connect the audio cable to the audio L input jack Side of this TV To AUDIO input jacks ss RA LU A A o IN 0 vo To VIDEO2 input jack L 3 il CC S VIDEO2 Al O il LL E Video cable not included i 2 i To VIDEO O To video put eek E output jack oc US AUDIO VIDEO OQ OUT OUT LLI R L Camcorder Video Game Do Te 190 200 n n input jacks V
Download Pdf Manuals
Related Search