Home

Ford 1998 Expedition Automobile User Manual

1.
2. Trip odometer Registers the kilometers miles of individual journeys To reset depress the control km h 10 Aen OGG 1n 14 Tachometer if equipped Indicates the engine speed in revolutions per minute Driving with your tachometer pointer in the red zone may damage the engine Instrumentation 15 Controls and features Use to adjust the brightness of the instrument panel during headlamp and parklamp operation Coupe e Rotate up to brighten A e Rotate down to dim Sedan e Rotate left to brighten e Rotate right to dim The dome lamp will not illuminate if the panel dimmer dome lamp control is switched to OFF 16 Controls and features POWER SIDE VIEW MIRRORS IF EQUIPPED The ignition must be in ACC or ON position to adjust the power side view mirrors To adjust your mirrors 1 Select L to adjust the left mirror ees or R to adjust the right mirror pr za MIRRORS ifr 2 Move the control in the direction you wish to tilt the mirror MIRRORS L R 3 Return to the center position to lock mirrors in place TRUNK REMOTE CONTROL Press the remote trunk release control on the instrument panel to open the trunk 17 Controls and features USING YOUR AUDIO SYSTEM AM FM Stereo Cassette D 5 O SJEA Oooo Se OFF v Volume power conirol Press the control to turn the audio VOL s
3. Controls and features Dolby noise reduction Dolby noise reduction operates only in tape mode Dolby noise reduction reduces the amount of hiss and static during tape playback Press the BO control to activate and deactivate Dolby noise reduction Dolby noise reduction is manufactured under license from Dolby Laboratories Licensing Corporation Dolby and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation Compression adjust Compression adjust works in CD mode if equipped and brings soft and loud CD passages together for a more consistent listening level Press the COMP control to activate and deactivate compression adjust Shuffle feature The shuffle feature operates in CD mode if equipped and plays all tracks on the current disc in random order If equipped with the CD changer the shuffle feature continues to the next disc after all tracks are played Press the SHUFFLE control to start this feature Random order play will continue until the SHUFFLE control is pressed again 31 Controls and features Setting the clock To set the hour press the hour h control and press 12 e to increase the hour and E gt 6 e to decrease the hour To set the minute press the minute m control and press e to increase the minute and e to decrease the minute Pr CD changer if equipped The
4. e Press gt to select the next disc in the CD changer Hold the control to fast forward through the remaining discs 26 Controls and features Seek function The seek function control works in radio tape or CD mode if equipped TUNE lt DISCS gt Seek function in radio mode e Press lt q to find the next listenable station down the frequency band e Press PP to find the next listenable station up the frequency band Seek function in tape mode e Press lt lt to listen to the previous selection on the tape e Press gt gt to listen to the next selection on the tape Seek function in CD mode if equipped e Press Ga to seek to the previous track of the current disc If a selection has been playing for three seconds or more and you press lt q the CD changer will replay that selection from the beginning e Press ee to seek forward to the next track of the current disc After the last track has been completed the first track of the current disc will automatically replay Scan function The scan function works in radio SEEK tape or CD mode if equipped ea TRACK gt gt TUNE DISCS 27 Controls and features Scan function in radio mode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band Press the control again to stop the scan mode Scan function in tape mode Press the SCAN control to hear a short sampling of all selections on the
5. 000 175 lubricant specifications 177 TEVELESE ccsisestctssaeadersaciscdactusaivecces 99 Mirrors CLEANING sea erccassvesseciaginadaccnentecss 172 side view mirrors power 17 MOO TOOT s5ed cbse ccnventeetiseictates 49 Motorcraft parts 158 175 Octane Tating ieri 156 Odometer ccccccessccsessteceseseees 14 Oil see Engine oil 132 Panic alarm feature remote ENTLY SYSTEM 2 0 0 eeeceeeeeeeeeeeeees 55 Parking brake c cece 90 Parts see Motorcraft parts 175 Power distribution box see FUSES cccsecscaystysacnespessens ess 113 Power door locks eeeee 50 Power steeYing serisnsercrinese 91 fluid checking and adding 142 fluid refill capacity 175 fluid specifications 176 177 Radio es Jeatesaeseentcagssovexescieehssetece sece 18 Rela yS eroen eenia 108 115 Remote entry system 53 55 illuminated entry cceee 57 locking unlocking doors 54 opening the trunk 000 55 PANIC ALATIN vecscseessceSseeedieseaditecs 55 replacement additional transmitters sierras 56 replacing the batteries 55 ROOE TACK aisanana nao 104 Safety belts see Safety restraints 0 08 12 63 64 65 66 Safety defects reporting 193 Safety restraints 63 64 65 66 belt minder ooo ee eeesceeeeeteeees 68 cleaning the safety belts 71 174 extension assembly 0 67 fOr AGUIES reie
6. 354 Natural Natural Cal Orange Green Green 50a Red Red Red ea Bue Yellow 70a en Brown Peon Natural Black 109 Roadside emergencies Passenger compartment fuse panel Coupe The fuses are coded as follows o GD GD aD GED C GER IBID C Fuse Relay Fuse Amp Passenger Compartment Location Rating Fuse Panel Description Daytime Running Lamps HAZARD Hazard Flasher ROOM Engine Controls RAP System Radio Shift Lock Courtesy Lamps Starting System ENGINE Warning Chime Instrument Cluster Electronic Automatic Transaxle Ignition System Constant Control Relay Module PCM Relay DOOR LOCK HORN AIR COND METER 110 Power Door Locks Horn Shift Lock A C Heater ABS Backup Lamps Engine Coolant Level Switch Instrument Cluster Rear Window Defrost Shift Lock Warning Chime Turn Signal Switch RADIO Power Mirrors Radio RAP System Roadside emergencies Fuse Relay Fuse Amp Passenger Compartment Location Rating Fuse Panel Description WIPER Wiper Washer Blower Motor Relay STOP 20A TAIL 15A O Exterior Lamps Instrument Illumination Stop Lamps Brake Pressure Switch 20A Brak i 15A i inati 15A FUEL INJ H02S Evaporative Emission Purge Flow Sensor BLOWE 30A CB Blower Motor Relay Sedan o e Gp GD GE D C D mC 111 Roadside emergencies The fuses are code
7. Cleaning non painted plastic exterior parts Use vinyl cleaner for routine cleaning Clean with a tar remover if necessary Do not clean plastic parts with thinners solvents or petroleum based cleaners 171 Maintenance and care Underbody Flush the complete underside of vehicle frequently Keep body drain holes unplugged Inspect for road damage Cleaning mirrors Do not clean your mirrors with a dry cloth or abrasive materials Use a soft cloth and mild detergent and water Be careful when removing ice from outside mirrors because you may damage the reflective surface Cleaning the exterior lamps Wash with the same detergent as the exterior of your vehicle If necessary use a tar remover such as Ford Extra Strength Tar and Road Oil Remover B7A 19520 AA To avoid scratching the lamps do not use a dry paper towel chemical solvents or abrasive cleaners Cleaning the wiper blades windshield and rear window If the wiper blades do not wipe properly clean the wiper blade rubber element with undiluted windshield washer solution or a mild detergent To avoid damaging the blades do not use fuel kerosene paint thinner or other solvents If the wiper still does not wipe properly this could be caused by substances on the windshield or rear window such as tree sap and some hot wax treatments used by commercial car washes Clean the outside of the windshield or rear window with a non abrasive cleaner such as Ford Ultra Clea
8. Make sure your trailer lamps conform to local and Federal regulations See your dealer or trailer rental agency for proper instructions and equipment for hooking up trailer lamps Driving while you tow When towing a trailer e Ensure that you turn off your speed control The speed control may shut off automatically when you are towing on long steep grades e Consult your local motor vehicle speed regulations for towing a trailer e Use a lower gear when towing up or down steep hills This will eliminate excessive downshifting and upshifting for optimum fuel economy and transaxle cooling e Anticipate stops and brake gradually Exceeding the GCWR rating may cause internal transaxle damage and void your warranty coverage Servicing after towing If you tow a trailer for long distances your vehicle will require more frequent service intervals Refer to your Scheduled Maintenance Guide for more information Trailer towing tips e Practice turning stopping and backing up in an area before starting on a trip to get the feel of the vehicle trailer combination When turning make wider turns so the trailer wheels will clear curbs and other obstacles e Allow more distance for stopping with a trailer attached e The trailer tongue weight should be 10 of the loaded trailer weight 103 Driving e After you have traveled 80 km 50 miles thoroughly check your hitch electrical connections and trailer wheel lug nuts e When sto
9. Poor fuel quality or water in the fuel 3 The fuel cap may not have been properly installed and securely tightened These temporary malfunctions can be corrected by filling the fuel tank with high quality fuel of the recommended octane and or properly installing and securely tightening the gas cap After three driving cycles without these or any other temporary malfunctions present the Service Engine Soon light should turn off A driving cycle consists of a cold engine startup followed by mixed city highway driving No additional vehicle service is required If the Service Engine Soon light remains on have your vehicle serviced at the first available opportunity Instrumentation Light is blinking Engine misfire is occurring which could damage your catalytic converter You should drive in a moderate fashion avoid heavy acceleration and deceleration and have your vehicle serviced at the first available opportunity Under engine misfire conditions excessive exhaust temperatures could damage the catalytic converter the fuel system interior floor coverings or other vehicle components possibly causing a fire Air bag readiness Momentarily illuminates when the o ignition is turned ON If the light O 4 fails to illuminate continues to flash P or remains on have the system serviced immediately Safety belt Momentarily illuminates when the ignition is turned to the ON position to remind you to fasten your safety b
10. be positioned so it does not cross or rest in front of the child s face or neck the child should wear the lap and shoulder belt Moving the child closer to the center of the vehicle may help provide a good shoulder belt fit Do not leave children unreliable adults or pets unattended in your vehicle To improve the fit of lap and shoulder belts on children who have outgrown child safety seats Ford recommends use of a belt positioning booster seat that is labelled as conforming to all Federal motor vehicle safety standards Belt positioning booster seats raise the child and provide a shorter firmer seating cushion that encourages safer seating posture and better fit of lap and shoulder belts on the child A belt positioning booster should be used if the shoulder belt rests in front of the child s face or neck or if the lap belt does not fit snugly on both thighs or if the thighs are too short to let the child sit all the way fate Seating and safety restraints back on the seat cushion when the lower legs hang over the edge of the seat cushion You may wish to discuss the special needs of your child with your pediatrician SAFETY SEATS FOR CHILDREN gt CI ou VY Child and infant or child safety seats Use a safety seat that is recommended for the size and weight of the child Carefully follow all of the manufacturer s instructions with the safety seat you put in your vehicle If you do not install and
11. e wheels out of alignment e loose or worn components in steering linkage AUTOMATIC TRANSAXLE OPERATION IF EQUIPPED Brake shift interlock This vehicle is equipped with a brake shift interlock feature that prevents the gearshift lever from being moved from P Park unless the brake pedal is depressed If you cannot move the gearshift lever out of P Park with the brake pedal depressed 1 Continue depressing the brake pedal and remove the shift lock override cap with a 2 5 cm 1 inch or longer screwdriver 2 Insert the screwdriver into the shift lock override opening and push down 92 Driving 3 Push and hold the thumb button 4 Move the gearshift lever If it is necessary to use the above procedure to move the gearshift lever it is possible that a fuse has blown and the vehicle s brakelamps may not be operating properly Refer to Fuses and relays in the Roadside emergencies chapter Do not drive your vehicle until you verify that the brakelamps are working If your vehicle gets stuck in mud or snow it may be rocked out by shifting from forward and reverse gears stopping between shifts in a steady pattern Press lightly on the accelerator in each gear Do not rock the vehicle for more than a few minutes The transaxle and tires may be damaged or the engine may overheat Always set the parking brake fully and make sure the gearshift lever is latched in P Park Turn off the ignition whe
12. parking brake is released The parking brake is not recommended to stop a moving vehicle However if the normal brakes fail the parking brake can be used to stop your vehicle in an emergency Since the parking brake applies only the rear brakes the vehicle s stopping distance will increase greatly and the handling of your vehicle will be adversely affected Always set the parking brake fully and make sure that the gearshift is securely latched in P Park automatic transaxle or in 1 First manual transaxle Push the button on the end of the parking brake and push the handle down as far as possible to release the brake Driving with the parking brake on will cause the brakes to wear out quickly and reduce fuel economy STEERING Your vehicle is equipped with power steering Power steering uses energy from the engine to help steer the vehicle To prevent damage to the power steering pump e Never hold the steering wheel to the extreme right or the extreme left for more than a few seconds when the engine is running e Do not operate the vehicle with a low power steering pump fluid level If the power steering system breaks down or if the engine is turned off you can steer the vehicle manually but it takes more effort If the steering wanders or pulls the condition could be caused by any of the following e underinflated tire s on any wheel s e high crown in center of road 91 Driving e high crosswinds
13. try a different brand of Regular unleaded gasoline Premium unleaded gasoline is not recommended particularly in the United States because it may cause these problems to become more pronounced If the problems persist see your dealer or a qualified service technician It should not be necessary to add any aftermarket products to your fuel tank if you continue to use high quality fuel of the recommended octane rating Aftermarket products could cause damage to the fuel system Repairs to correct the effects of using an aftermarket product in your fuel may not be covered by your warranty Many of the world s automakers issued the World wide Fuel Charter that recommends gasoline specifications to provide improved performance and emission control system protection for your vehicle Gasolines that meet the World wide Fuel Charter should be used when available Ask your fuel supplier about gasolines that meet the World wide Fuel Charter Cleaner air Ford approves the use of reformulated cleaner burning gasolines to improve air quality These gasolines may contain oxygenates up to 10 ethanol or 15 MTBE Running out of fuel Avoid running out of fuel because this situation may have an adverse affect on powertrain components If you have run out of fuel e You may need to cycle the ignition from OFF to ON several times after refueling to allow the fuel system to pump the fuel from the tank to the engine e Your
14. 3 With the parking brake engaged and your foot on the brake pedal start the engine and move the gearshift lever through all of the gear ranges Allow sufficient time for each gear to engage 4 Latch the gearshift lever in P Park and leave the engine running 5 Remove the dipstick wiping it clean with a clean dry lint free rag If necessary refer to Identifying components in the engine compartment in this chapter for the location of the dipstick 6 Install the dipstick making sure it is fully seated in the filler tube 7 Remove the dipstick and inspect the fluid level The fluid should be in the designated areas for normal operating temperature Low fluid level Do not drive the vehicle if the fluid level is at the bottom of the dipstick ii and the outside temperatures are above 10 C 50 F oe noS gt 143 Maintenance and care Correct fluid level The transmission fluid should be checked at normal operating temperatures 66 C 77 C 150 F 170 F on a level surface The normal operating temperature can be reached after approximately 30 km 20 miles of driving The transmission fluid should be in Iel this range if at normal operating temperature 66 C 77 C CC 150 F 170 F High fluid level Fluid levels above the safe range 4 may result in transaxle failure An overfill condition of transmission as 20 C 65 fluid may cause shift and or engagement concerns and or possible
15. CD changer is located in the trunk of your vehicle Slide the door to access the CD changer magazine Press 4 to eject the magazine 32 Controls and features 4 Zo Make sure only one disc is inserted in each slot Each disc must be inserted with the label surface upward You may insert up to six CDs The magazine does not need to be full for the changer to operate Radio power must be turned on to play the CDs in the changer The magazine may be stored in the glove box when not being used The CD magazine may be inserted or ejected with the radio power off ONLY use the magazine supplied with the CD changer other types will damage the unit Keep the CD changer door closed Coins and foreign objects will damage the CD player and void your audio system warranty Do not insert any promotional odd shaped or sized discs or discs with removable labels into the CD changer as jamming may occur 33 Controls and features Troubleshooting the CD changer if equipped The laser beam used in the compact disc player is harmful to the eyes Do not attempt to disassemble the case If sound skips e You may be traveling on a rough road playing badly scratched discs or the disc may be dirty Skipping will not scratch the discs or damage the player If your changer does not work it may be that e A disc is already loaded where you want to insert a disc e The disc is inserted with
16. However NHTSA cannot become involved in individual problems between you your dealer or Ford Motor Company To contact NHTSA you may either call the Auto Safety Hotline toll free at 1 800 424 9393 202 366 0123 in the Washington D C area or write to NHTSA U S Department of Transportation 400 Seventh Street Washington D C 20590 You can also obtain other information about motor vehicle safety from the Hotline 193 Index Air bag supplemental restraint system oo 72 and child safety seats 74 GESCTIPUION a6 cissskecdsssdbasiauwidesivis 72 disposal sss ssccsecsisadesssassessssuareessoas 76 Oriver air Dag seccsecvsccsacckenasgerses 74 indicator light 0 10 76 OPETALION ss scenisscoecesceapecsesaascathess 74 passenger air bag eee 74 Air cleaner filter 00 148 175 Air conditioning 00 36 Antifreeze see Engine coolant o s 137 Anti lock brake system see Brakes ccccccescccsesseees 89 90 Anti theft system 57 58 arming the system 6 58 disarming a triggered system 58 59 disarming an untriggered system cce 58 warning light ee eee 11 Audio system see Radio 18 Automatic transaxle 00 0 92 Griving With eee 94 fluid adding ou eee 143 fluid checking 0 00 143 fluid refill capacities 175 fluid specification 0 0 177 Axle lubricant specifications 1
17. M test of the on board diagnostics system If your Check Engine Service Engine Soon light is on refer to the description in the Warning Lights and Chimes section of the Instrumentation chapter Your vehicle may not pass the I M test with the Check Engine Service Engine Soon light on If the vehicle s powertrain system or its battery has just been serviced the on board diagnostics system is reset to a not ready for I M test condition To ready the on board diagnostics system for I M testing a minimum of 30 minutes of city and highway driving is necessary as described below e First at least 10 minutes of driving on an expressway or highway e Next at least 20 minutes driving in stop and go city type traffic with at least four idle periods Allow the vehicle to sit for at least eight hours without starting the engine Then start the engine and complete the above driving cycle The 162 Maintenance and care engine must warm up to its normal operating temperature Once started do not turn off the engine until the above driving cycle is complete BULBS Replacing exterior bulbs It is a good idea to check the operation of the following lights frequently e Headlamps e Turn signals e Foglamps if equipped e High mount brakelamp e Tail lamps e Brakelamps e Backup lamps e License plate lamp e Hazard flashers Do not remove lamp bulbs unless they will be replaced immediately If a bulb is removed for a
18. Minder if it is currently enabled or enable Belt Minder if it is currently disabled 7 Confirmation of disabling Belt Minder is provided by flashing the safety belt warning light four times per second for three seconds 8 Confirmation of enabling Belt Minder is provided by flashing the safety belt warning light four times per second for three seconds followed by three seconds with the safety belt warning light off then followed by flashing the safety belt warning light four times per second for three seconds again 9 After receiving confirmation the deactivation activation procedure is complete Safety belt maintenance Inspect the safety belt systems periodically to make sure they work properly and are not damaged Inspect the safety belts to make sure there are no nicks wears or cuts replacing if necessary All safety belt assemblies including retractors buckles front seat belt buckle assemblies buckle support assemblies slide bar if equipped shoulder belt height adjusters Gf equipped shoulder belt guide on seatback Cif equipped child safety seat tether bracket assemblies if equipped and attaching hardware should be inspected after a collision Ford recommends that all safety belt assemblies used in vehicles involved in a collision be replaced However if the collision was minor and a qualified technician finds that the belts do not show damage and continue to operate properly they do not need to be replaced Safety
19. Service Engine Soon indicator may come on For more information on the Service Engine Soon indicator refer to the Instrumentation chapter 157 Maintenance and care Fuel Filter For fuel filter replacement see your dealer or a qualified service technician Refer to the Scheduled Maintenance Guide for the appropriate intervals for changing the fuel filter Replace the fuel filter with an authorized Motorcraft part The customer warranty may be void for any damage to the fuel system if an authorized Motorcraft fuel filter is not used ESSENTIALS OF GOOD FUEL ECONOMY Measuring techniques Your best source of information about actual fuel economy is you the driver You must gather information as accurately and consistently as possible Fuel expense frequency of fillups or fuel gauge readings are NOT accurate as a measure of fuel economy We do not recommend taking fuel economy measurements during the first 1 600 km 1 000 miles of driving engine break in period You will get a more accurate measurement after 3 000 km 5 000 km 2 000 miles 3 000 miles Filling the tank The advertised fuel capacity of the fuel tank on your vehicle is equal to the rated refill capacity of the fuel tank as listed in the Refill Capacities section of the Capacities and specifications chapter The advertised capacity is the amount of the indicated capacity and the empty reserve combined Indicated capacity is the difference in the amount
20. System SRS in this chapter for special instructions about using air bags Important child restraint precautions You are required by law to use safety restraints for children in the U S and Canada If small children ride in your vehicle generally children who are four years old or younger and who weigh 18 kg 40 lbs or less you 76 Seating and safety restraints must put them in safety seats made especially for children Check your local and state or provincial laws for specific requirements regarding the safety of children in your vehicle Never let a passenger hold a child on his or her lap while the vehicle is moving The passenger cannot protect the child from injury in a collision Always follow the instructions and warnings that come with any infant or child restraint you might use When possible always place children under age 12 in the rear seat of your vehicle Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position Children and safety belts If the child is the proper size restrain the child in a safety seat Children who are too large for child safety seats as specified by your child safety seat manufacturer should always wear safety belts Follow all the important safety restraint and air bag precautions that apply to adult passengers in your vehicle If the shoulder belt portion of a combination lap and shoulder belt can
21. and luggage compartment locked and keep keys out of a child s reach Unsupervised children could lock themselves in an open trunk and risk injury Children should be taught not to play in vehicles On hot days the temperature in the trunk or vehicle interior can rise very quickly Exposure of people or animals to these high temperatures for even a short time can cause death or serious heat related injuries including brain damage Small children are particularly at risk REMOTE ENTRY SYSTEM Your vehicle may have an all door remote entry system or a driver s door only remote entry system The all door remote entry system allows you to e lock or unlock all vehicle doors without a key e arm and disarm the anti theft system For more information on the anti theft system refer to Anti theft system in this chapter e open the trunk e activate the panic alarm The driver s door only entry system allows you to lock the driver s door unlock the driver s door only without a key activate the panic alarm e open the trunk The remote entry features only operate with the ignition in the OFF position If there is any potential remote keyless entry problem with your vehicle ensure ALL key fobs remote entry transmitters are brought to the dealership to aid in troubleshooting 53 Controls and features Unlocking the doors f Press this control to unlock the driver s door The interior lamp
22. automatic locking mode is not available on the driver safety belt 64 Seating and safety restraints When to use the automatic locking mode e Anytime a child safety seat is installed in a passenger front or outboard rear seating position if equipped Children 12 years old and under should be properly restrained in the rear seat whenever possible Refer to Safety Restraints for Children or Safety Seats for Children later in this chapter How to use the automatic locking mode e Buckle the combination lap and shoulder belt e Grasp the shoulder portion and pull downward until the entire belt is extracted e Allow the belt to retract As the belt retracts you will hear a clicking sound This indicates the safety belt is now in the automatic locking mode 65 Seating and safety restraints How to disengage the automatic locking mode Disconnect the combination lap shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive emergency locking mode Front safety belt height adjustment if equipped Your vehicle has safety belt height adjustments for the driver and front passenger Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder To lower the shoulder belt height push the button and slide the height adjuster down To raise the height of the shoulder belt slide the height adjuster up Pull down on the heigh
23. belt assemblies not in use during a collision should also be inspected and replaced if either damage or improper operation is noted Failure to inspect and if necessary replace the safety belt assembly under the above conditions could result in severe personal injuries in the event of a collision Refer to Cleaning and maintaining the safety belts in the Maintenance and care section 71 Seating and safety restraints AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM SRS Your vehicle is equipped with a crash sensing and diagnostic module which records information about the air bag and sensor systems In the event of a collision this module may save information related to the collision including information about the air bag system and impact severity This information will assist Ford in the servicing of your vehicle and may help Ford better understand real world collisions and further improve the safety of future vehicles Important supplemental restraint system SRS precautions The supplemental restraint system T is designed to work with the safety belt to help protect the driver and right front passenger from certain upper body injuries Air bags DO NOT inflate slowly or gently and the risk of injury from a deploying air bag is greatest close to the trim covering the air bag module KSim All occupants of the vehicle including the driver should always properly wear their safety belts even when an air bag SR
24. economy when operated in the top cruise gear and with steady pressure on the gas pedal e Close windows for high speed driving EPA window sticker Every new vehicle should have the EPA window sticker Contact your dealer if the window sticker is not supplied with your vehicle The EPA window sticker should be your guide for the fuel economy comparisons with other vehicles It is important to note the box in the lower left corner of the window sticker These numbers represent the Range of L 100 km MPG expected on the vehicle under optimum conditions Your fuel economy may vary depending upon the method of operation and conditions EMISSION CONTROL SYSTEM tC Your vehicle is equipped with various emission control components and a catalytic converter which will enable your vehicle to comply with applicable exhaust emission standards To make sure that the catalytic converter and other emission control components continue to work properly e Use only the specified fuel listed e Avoid running out of fuel e Do not turn off the ignition while your vehicle is moving especially at high speeds e Have the items listed in your Scheduled Maintenance Guide performed according to the specified schedule The scheduled maintenance items listed in the Scheduled Maintenance Guide are essential to the life and performance of your vehicle and to its emissions system If other than Ford Motorcraft or Ford authorized parts are used for ma
25. front structure should be properly aligned before aiming the headlamps 168 Maintenance and care Horizontal aim adjustment 1 Park the vehicle on a level surface 2 With the hood open locate the horizontal indicator and the E adjusting screw They are located below the viewing window at the E rear of the headlamp assembly 3 The L and R under the viewing window on the top of the headlamp refer to the directional change left or right of the horizontal aim 4 Use a 4 mm wrench or socket to turn the horizontal adjusting screw until the forward edge of the knurled portion of the screw is aligned with the 0 reference mark as shown on the plastic slider when viewed directly from above Vertical aim adjustment 1 Park the vehicle on a level surface 2 With the hood open locate the bubble level and the vertical adjustment screw The adjustment screw is located on the outboard side of the headlamp below the headlamp upper attachment 169 Maintenance and care 3 The UP and DN on the bubble indicate the directional change up or down of the vertical aim 4 Use a 4 mm wrench or socket to turn the vertical adjusting screw clockwise or counterclockwise until the bubble is centered between the lines Repeat the above process to the other headlamp if necessary CLEANING AND CARING FOR YOUR VEHICLE Refer to th
26. inside the vehicle don t drive with the climate control system in the OFF position Don t put objects under the front seat that will interfere with the airflow to the back seats Remove any snow ice or leaves from the air intake area at the bottom of the windshield under the hood Do not place objects over the defroster outlets These objects can block airflow and reduce your ability to see through your windshield Also avoid placing small objects on top of your instrument panel These objects can fall down into the defroster outlets and block airflow and possibly damage your climate control system Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop Manual heating and air conditioning system if equipped LO o j OFF I AIC wi we Ji P HI 37 Controls and features Fan speed control Controls the volume of air circulated L e in the vehicle Temperature control knob Controls the temperature of the airflow inside the vehicle Mode selector control Controls the direction of the airflow ae to od the inside of the vehicle Ale Vad y F YP The air conditioning compressor will operate in all modes except ed and ae However the air conditioning will only function if the outside temperature is about 10 C 60 F or higher Since the air conditioner removes considerable moisture from the air during operation it is norma
27. is moved to the DOOR position the lamp will only come on if a door is opened If the control is moved to the OFF position the lamp will not come on at all aa The map lamps and controls are L Af located on the dome lamp Press the os gt controls on either side of each map lamp to activate the lamps Map lamps if equipped The map lamps and controls are located on the dome lamp Press the controls on either side of the dome lamp to activate the map lamps 49 Controls and features If equipped with a moon roof the map lamps are located on the moon roof control panel Press the control next to the map lamp to illuminate the lamp POWER DOOR LOCKS IF EQUIPPED Press U to unlock all doors and L to 7 lock all doors 7 CHILDPROOF DOOR LOCKS When these locks are set the rear doors cannot be opened from the CM inside The rear doors can be FP opened from the outside when the Y doors are unlocked We M The childproof locks are located on rear edge of each rear door and must be set separately for each door Setting the lock for one door will not automatically set the lock for both doors Move lock control down to engage the lock Move control up to disengage childproof locks 50 Controls and features POWER WINDOWS IF EQUIPPED Press and hold the rocker switches to open and close windows e Press the top portion of the I rocker switch to close a a e Pre
28. is sounding The driver s safety belt is buckled before the ignition switch is turned to the ON position The Belt Minder feature is activated the safety belt warning light illuminates and the warning chime sounds for 6 seconds every 30 seconds repeating for approximately 5 minutes or until safety belt is buckled The Belt Minder feature will not activate The Belt Minder feature will not activate The purpose of the Belt Minder is to remind occasional wearers to wear safety belts all of the time 68 Seating and safety restraints The following are reasons most often given for not wearing safety belts All statistics based on U S data Reasons given Consider Crashes are rare 36 700 crashes occur every day The more we events drive the more we are exposed to rare events even for good drivers in 4 of us will be seriously injured in a crash during our lifetime Tm not going far 3 of 4 fatal crashes occur within 25 miles of home Belts are Ford designs its safety belts to enhance comfort If uncomfortable you are uncomfortable try different positions for the safety belt upper anchorage and seatback which should be as upright as possible this can improve comfort I was in a hurry Prime time for an accident Belt Minder reminds us to take a few seconds to buckle up Seat belts don t Safety belts when used properly reduce risk of work death to front seat occu
29. lock the shield by rotating it clockwise until it locks into position 11 Connect the headlamp wiring socket to the in line connector 12 Turn the headlamps on and make sure they work properly If the headlamp was correctly aligned before you changed the bulb you should not need to align it again 164 Maintenance and care Replacing foglamp bulbs 1 Remove the bulb socket from the foglamp by turning counterclockwise 2 Disconnect the electrical connector from the foglamp bulb 3 Connect the electrical connector to the new foglamp bulb 4 Install the bulb socket in the foglamp turning clockwise Replacing high mount brakelamp bulbs To remove the brakelamp bulb 1 Push the center of the push pins in to release tension 2 Pull the push pins out of the cover and slide the cover away from the package tray 3 Remove the bulb by rotating it counterclockwise and pulling it out of the lamp assembly 4 Carefully pull out the bulb straight out of the socket and push in new bulb To install the brakelamp bulb 1 Install the bulb into the lamp assembly and rotate clockwise 2 Install the push pins in the cover far enough that the pins protrude outside of the cover about 6 mm 1 4 inch 3 Install the cover and secure with the push pins 165 Maintenance and care Tail lamp turn signal backup lamp bulbs The tail turn signal lamp and backup lamp bulbs are located in the same porti
30. minutes before disconnecting the jumper cables Removing the jumper cables Remove the jumper cables in the reverse order that they were connected 1 Remove the jumper cable from the grownd metal surface 2 Remove the jumper cable on the negative connection of the booster vehicle s battery 122 Roadside emergencies 3 Remove the jumper cable from the positive terminal of the booster vehicle s battery 4 Remove the jumper cable from the positive terminal of the disabled vehicle s battery After the disabled vehicle has been started and the jumper cables removed allow it to idle for several minutes so the engine computer can relearn its idle conditions 123 Roadside emergencies WRECKER TOWING If you need to have your vehicle towed contact a professional towing service or if you are a member your roadside assistance center It is recommended that your vehicle be towed with a wheel lift or flatbed equipment Do not tow with a slingbelt Ford Motor Company has not approved a slingbelt towing procedure If your vehicle is to be towed from the rear using wheel lift equipment the front wheels drive wheels must be placed on a dolly to prevent damage to the transmission If the vehicle is towed by other means or incorrectly vehicle damage may occur Ford Motor Company provides a towing manual for all authorized tow truck operators Have your tow truck operator r
31. remove any slack in the belt 9 Before placing the child in the seat forcibly tilt the seat forward and back to make sure the seat is securely held in place R 8 Allow the safety belt to retract to yx gt N lt 10 Try to pull the belt out of the retractor to make sure the retractor is in the automatic locking mode you should not be able to pull more belt out If the retractor is not locked unbuckle the belt and repeat steps two through nine Check to make sure the child seat is properly secured before each use 81 Seating and safety restraints Attaching child safety seats with tether straps Most new forward facing child safety seats include a tether strap which goes over the back of the seat and hooks to an anchoring point Tether straps are available as an accessory for many older safety seats Contact the manufacturer of your child seat for information about ordering a tether strap The rear seats of your vehicle are equipped with built in tether strap anchors located behind the seats as described below The tether anchors in your vehicle are either located under a cover marked with the tether anchor symbol shown with title or are recessed bars on the back side of the seatback The tether strap anchors in your vehicle are in the following positions shown from top view e C _ N oupe C m 8 Xe _ S e Sed paz eqan A gt a Lb 8 L Attach the tet
32. the valve stem is facing outward Reinstall the lug nuts until the wheel is snug against the hub Do not fully tighten the lug nuts until the wheel has been lowered 8 Lower the wheel by turning the jack handle counterclockwise 9 Remove the jack and fully tighten the lug nuts in the order shown 10 Put flat tire jack and lug wrench away Make sure the jack is fastened so it does not rattle when you drive Unblock the wheels 118 Roadside emergencies JUMP STARTING YOUR VEHICLE The gases around the battery can explode if exposed to flames sparks or lit cigarettes An explosion could result in injury or vehicle damage Do not push start your vehicle You could damage the catalytic converter Batteries contain sulfuric acid which can burn skin eyes and clothing if contacted Do not attempt to push start your vehicle Automatic transmissions do not have push start capability Preparing your vehicle 1 Use only a 12 volt supply to start your vehicle 2 Do not disconnect the battery of the disabled vehicle as this could damage the vehicle s electrical system 3 Park the booster vehicle close to the hood of the disabled vehicle making sure the two vehicles do not touch Set the parking brake on both vehicles and stay clear of the engine cooling fan and other moving parts 4 Check all battery terminals and remove any excessive corrosion before you attach the battery cables Ensure that vent caps are tight
33. tilt steering control down to move the steering wheel up or down Hold the control while adjusting the wheel to the desired position then push the control back up to lock the steering wheel in position A Never adjust the steering wheel when the vehicle is moving HAZARD FLASHER For information on the hazard flasher control refer to Hazard flasher in the Roadside emergencies chapter 47 Controls and features WINDSHIELD WIPER AND WASHER 8 e For intermittent wiping move the a control down one position and rotate the wiper switch to the desired position e For low speed wiping move the control down two positions e For high speed wiping move the control down three positions v e For mist wiping move the control up one position e To spray the washer fluid pull the wiper control toward you 48 Controls and features MOON ROOF IF EQUIPPED e Press and hold OPEN to raise the moon roof to the vent position Press OPEN again to fully open the moon roof e Press the opposite end of the toggle control to close the moon roof from either position Sliding shade The moon roof has a sliding shade that you can open or close when the moon roof is closed INTERIOR LAMPS Dome lamp and map lamps if equipped The dome lamp is located overhead between the driver and passenger seats The dome lamp will stay on if the control is moved to the ON position When the control
34. 76 Battery s cctctcsets cases Bsa cohteas tect 146 acid treating emergencies 146 charging system warning light 11 jumping a disabled battery 119 maintenance free s 146 replacement specifications 175 SOTVICING vorisi teia REE 146 Belt Minder secsscsissiessesieasssenazesveis 68 Brak Seo ERS 89 antiloekR recisi 89 90 194 anti lock brake system ABS warning light 0 0 eee 11 90 brake warning light 10 fluid checking and adding 135 fluid refill capacities 175 fluid specifications 176 177 lubricant specifications 176 177 PIKNE roeren 90 Shift Interlock serieererep sai 92 Break in period cccccccssseeeenees 3 Capacities for refilling fluids 175 Certification Label 008 180 Child safety restraints 77 child safety belts oo 77 Child safety seats 0 78 attaching with tether straps 82 in TONG Seat csecssesaccsssweseseivessezes 79 I rear SCAU essnee aen 79 Cleaning your vehicle 170 engine compartment 172 CXUCHION seraa EN 171 172 exterior lamps ceeeeeee 172 instrument panel 008 173 instrument panel lens 173 MULE TOM amp cexesenhadsegennenceeae test 173 174 TOME OLS axcossdsasessesddedendesnedenefvacete 172 plasti PALS scsicsissscesssssvescsveevss 171 safety belts cccceceeeteeees 174 WASHING accis seh cavecraveevestea
35. CE To fully assist you should you have a vehicle concern Ford offers a complimentary roadside assistance program This program is separate from the New Vehicle Limited Warranty The service is available e 24 hours seven days a week e for the Basic warranty period Canada or New Vehicle Limited Warranty period U S of three years or 60 000 km 86 000 miles whichever comes first on Ford and Mercury vehicles and four years or 80 000 km 50 000 miles on Lincoln vehicles Roadside assistance will cover e changing a flat tire jump starts lock out assistance fuel delivery towing of your disabled vehicle to the nearest Ford dealership or your selling dealer if within 25 kms 15 5 miles of the nearest Ford Dealership one tow per disablement Even non warranty related tows like accidents or getting stuck in the mud or snow are covered some exclusions apply such as impound towing or repossession Using roadside assistance Complete the roadside assistance identification card and place it in your wallet for quick reference In the United States this card is found in the Owner Guide portfolio in the glove compartment in Ford vehicles and is mailed to you if you own a Mercury or Lincoln In Canada it is found in the Roadside Assistance book in the glove compartment To receive roadside assistance in the United States for Ford or Mercury vehicles call 1 800 241 3673 or if you own a Lincoln vehicle call 1 800 521 4140 In C
36. Center at 1 800 392 3673 Ford TDD for the hearing impaired 1 800 232 5952 or by writing to the Center at the following address Ford Motor Company Customer Assistance Center 16800 Executive Plaza Drive P O Box 6248 Dearborn Michigan 48121 UTILIZING THE MEDIATION ARBITRATION PROGRAM CANADA ONLY In those cases where you continue to feel that the efforts by Ford and the dealer to resolve a factory related vehicle service concern have been unsatisfactory Ford of Canada participates in an impartial third party mediation arbitration program administered by the Canadian Motor Vehicle Arbitration Plan CAMVAP The CAMVAP program is a straight forward and relatively speedy alternative to resolve a disagreement when all other efforts to produce a settlement have failed This procedure is without cost to you and is designed to eliminate the need for lengthy and expensive legal proceedings In the CAMVAP program impartial third party arbitrators conduct hearings at mutually convenient times and places in an informal environment These impartial arbitrators review the positions of the parties make decisions and when appropriate render awards to resolve disputes CAMVAP decisions are fast fair and final the arbitrator s award is binding both to you and Ford of Canada CAMVAP services are available in all territories and provinces except Quebec For more information without charge or obligation call your CAMVAP Provincial Administ
37. Contents Before driving Introduction 2 Instrumentation 6 Controls and features 16 Seating and safety restraints 60 Starting and driving Starting 84 Driving 89 Roadside emergencies 105 Servicing Maintenance and care 125 Capacities and specifications 175 Customer assistance 182 Reporting safety defects 193 Index 194 All rights reserved Reproduction by any means electronic or mechanical including photocopying recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company Ford may change the contents without notice and without incurring obligation Copyright 1999 Ford Motor Company Introduction The following warning may be required by California law CALIFORNIA Proposition 65 Warning Engine exhaust some if its constituents and certain vehicle components contain or emit chemicals known to the State of California to cause cancer or birth defects or other reproductive harm ICONS Indicates a safety alert Read the following section on Warnings Indicates vehicle information related to recycling and other environmental concerns will follow Correct vehicle usage and the authorized disposal of waste cleaning and lubrication materials are significant steps towards protecting the environment Indicates a message regarding child safety restraints Refer to Seating iL and safety restraints for more informa
38. Maximum Trailer Weight Rating Maximum weight of a trailer the vehicle is permitted to tow The maximum trailer weight rating is determined by subtracting the vehicle curb weight for each engine transmission combination any required option weight for trailer towing and the weight of the driver from the GCWR for the towing vehicle e Maximum Trailer Weight Maximum weight of a trailer the loaded vehicle including passengers and cargo is permitted to tow It is determined by subtracting the weight of the loaded trailer towing vehicle from the GCWR for the towing vehicle e Trailer Weight Range Specified weight range that the trailer must fall within that ranges from zero to the maximum trailer weight rating Remember to figure in the tongue load of your loaded trailer when figuring the total weight Do not exceed the GVWR or the GAWR specified on the certification label Do not use replacement tires with lower load carrying capacities than the originals because they may lower the vehicle s GVWR and GAWR limitations Replacement tires with a higher limit than the originals do not increase the GVWR and GAWR limitations The Certification Label found on the inside pillar of the driver s door lists several important vehicle weight rating limitations Before adding any additional equipment refer to these limitations If you are adding weight to the front of your vehicle potentially including weight added to the cab the weight added
39. S is provided 72 Seating and safety restraints Always transport children 12 years old and under in the back seat and always properly use appropriate child restraints National Highway Traffic Safety Administration NHTSA recommends a minimum distance of at least 25 cm 10 inches between an occupant s chest and the driver air bag module Never place your arm over the air bag module as a deploying air bag can result in serious arm fractures or other injuries Steps you can take to properly position yourself away from the air bag e Move your seat to the rear as far as you can while still reaching the pedals comfortably e Recline the seat slightly one or two degrees from the upright position Do not put anything on or over the air bag module Placing objects on or over the air bag inflation area may cause those objects to be propelled by the air bag into your face and torso causing serious injury Do not attempt to service repair or modify the Air Bag Supplemental Restraint System or its fuses See your Ford or Lincoln Mercury dealer Modifications to the front end of the vehicle including frame bumper front end body structure and tow hooks may effect the performance of the air bag sensors increasing the risk of injury Do not modify the front end of the vehicle 73 Seating and safety restraints Children and air bags For additional important safety information read all information on safety restraints
40. SP M1C207 A velocity joints High Temp Engine coolant Ford Premium Engine Coolant E2FZ 19549 AA ESE M97B44 A in Canada Motorcraft CXC 8 B Power steering Motorcraft XT 2 QDX MERCON fluid MERCON ATF C9AZ 19550 AC ESR M17P5 A Windshield washer fluid Ultra clear Windshield Washer Concentrate 1 DO NOT USE Ford Extended Life Engine Coolant F6AZ 19544 AA meeting Ford specification WSS M97B44 D orange in color Refer to Adding engine coolant in the Maintenance and Care chapter ENGINE DATA Cubic inches Required fuel Firing order Spark plug gap Ignition system Compression ratio 2 0L SOHC I4 2 0L DOHC Zetec engine engine 1 3 4 2 1 3 4 2 1 3 1 4 mm 1 22 1 32 mm 177 Capacities and specifications VEHICLE DIMENSIONS 1 712 0 67 4 1 681 0 66 2 1 328 4 52 3 1 351 0 53 2 2 499 0 98 4 2 499 0 98 4 5 Track Front 1 435 1 56 5 1 435 1 56 5 5 Track Rear 1 435 1 56 5 1 435 1 56 5 L Cr 4 l gt e Coupe and Sedan models 178 Capacities and specifications of c J o H gt e Coupe model e Coupe model 179 Capacities and specifications e Sedan model IDENTIFYING YOUR VEHICLE Certification label The National Highway Traffic Safety MFD BY FORD MOTOR CO IN U S A Administration Regulations require eee Sinan LE TOKKE that a Certification Label be a
41. Temperature A These Tire Quality Grades are determined by standards that the United States Department of Transportation has set 149 Maintenance and care Tire Quality Grades apply to new pneumatic tires for use on passenger cars They do not apply to deep tread winter type snow tires space saver or temporary use spare tires tires with nominal rim diameters of 10 to 12 inches or limited production tires as defined in Title 49 Code of Federal Regulations Part 575 104 c 2 U S Department of Transportation Tire quality grades The U S Department of Transportation requires Ford to give you the following information about tire grades exactly as the government has written it Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course For example a tire graded 150 would wear one and one half 1 1 2 times as well on the government course as a tire graded 100 The relative performance of tires depends upon the actual conditions of their use however and may depart significantly from the norm due to variations in driving habits service practices and differences in road characteristics and climate Traction AA AB C The traction grades from highest to lowest are AA A B and C Those grades represent the tire s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces o
42. a Clear Spray Glass Cleaner not available in Canada May be sold with the Motorcraft name FORD ACCESSORIES FOR YOUR VEHICLE A wide selection of Ford accessories are available for your vehicle through your local authorized Ford Lincoln Mercury or Ford of Canada dealer These quality accessories have been specifically engineered to fulfill your automotive needs they are custom designed to complement the style and aerodynamic appearance of your vehicle In addition each accessory is made from high quality materials and meets or exceeds Ford s rigid engineering and safety specifications Ford accessories are warranted for up to 12 months or 20 000 km 12 000 miles on all cars and light trucks and 12 months with unlimited distance on medium heavy duty trucks unless the accessory is installed on a new vehicle then the warranty becomes the balance of the new vehicle s warranty or the accessories warranty whichever is greater See your dealer for complete warranty information and availability Not all accessories are available for all models Vehicle Security Styled wheel protector locks Vehicle security systems 190 Customer assistance Comfort and convenience Air conditioner Cargo nets Cargo organizers Engine block heaters Travel equipment Auto headlamps with daytime running lights DRL Console armrest Daytime running lights DRL Electrochromic inside mirror with compass Electrochromic inside mirror with compass and
43. ack can reduce the effectiveness of the seat s safety belt in the event of a collision Lift handle to move seat forward or backward Pull lever up to adjust seatback 61 Seating and safety restraints Driver seat memory recliner if equipped e Pull control to adjust seatback e To retain selected seatback position release seatback by moving memory recliner control forward to release seatback e Push seatback rearward until the seatback latches This will be the first position selected 62 Seating and safety restraints Folding rear seats if equipped Folding down the rear seats To fold the seatback down e Press the latch control downward or pull up on strap and e Pull the seatback forward and down Returning the seat to the upright position Check to see that the seat and seatback is latched securely in position Keep floor area free of objects that would prevent proper seat engagement Never attempt to adjust the seat while the vehicle is in motion To return the seat to the upright normal seating position e Rotate seat upward and latch The full rear bench seat is shown The split folding rear seat Cif equipped operates in a similar manner SAFETY RESTRAINTS Safety restraints precautions Always drive and ride with your seatback upright and the lap belt snug and low across the hips 63 Seating and safety restraints To reduce the risk of injury make sure children sit where they
44. aeregsaeenss 170 WING arrra arae ENES KEERN 171 WINGEIS iien an 171 WINDOWS sera onserer 174 wiper blades cccececeeeeees 172 woodtone trim 0 eee 174 Climate control see Air conditioning or Heating 36 COC e RA 24 32 Clutch ENGAGE irana 136 operation while driving 97 recommended shift speeds 99 Coolant checking and adding 137 refill capacities 0 141 175 specifications c 176 177 Cruise control see Speed control 0 43 Customer Assistance 105 Ford accessories for your vehicle cee 189 Ford Extended Service Plan wu eee 182 Getting assistance outside the U S and Canada 188 Getting roadside assistance 105 Getting the service you need sse 182 Ordering additional owner s literature oo 192 The Dispute Settlement Board 08 185 Utilizing the Mediation Arbitration Program 188 Daytime running lamps see Lamps ccccceceessceeesseeeeees Al Defrost rear WINKOW ccceccecesseeeeeeneeees 40 Dipstick automati c transmission fluid 143 ENGINE Oil orseson ne 132 Doors lubricant specifications 176 Driving under special conditions through water essees 104 Emergencies roadside Jump starting oo eee 119 Emission control system 161 GING fesciss ciscsassastacessdiodastes 177 178 check engine se
45. afety restraints chapter 84 Starting 2 Make sure the headlamps and vehicle accessories are off 3 Make sure the parking brake is set If starting a vehicle with an automatic transaxle e Make sure the gearshift is in P Park If starting a vehicle with a manual transaxle e Push the clutch pedal to the floor 85 Starting 4 Turn the key to 3 ON without turning the key to 4 START If there is difficulty in turning the key firmly rotate the steering wheel left and right until the key turns freely This condition may occur when e front wheels are turned e front wheel is against the curb e steering wheel is turned when getting in or out of the vehicle 7 Make sure the corresponding lights illuminate briefly If a light fails to illuminate have the vehicle serviced e If the driver s safety belt is fastened the A light may not illuminate 86 Starting STARTING THE ENGINE Whenever you start your vehicle release the key as soon as the engine starts Excessive cranking could damage the starter 1 Turn the key to 4 START without pressing the accelerator pedal and release as soon as the engine starts The key will return to 3 ON 2 If the temperature is above 12 C 10 F and the engine does not start within five seconds on the first try turn the key to OFF wait 10 seconds and try again 3 If the tempera
46. anada call 1 800 665 2006 Should you need to arrange roadside assistance for yourself Ford will reimburse a reasonable amount To obtain information about reimbursement call 1 800 241 3673 in the United States for Ford or Mercury vehicles or if you own a Lincoln vehicle call 1 800 521 4140 Call 1 800 665 2006 in Canada 105 Roadside emergencies Roadside coverage beyond basic warranty In the United States you may purchase additional roadside assistance coverage beyond this period through the Ford Auto Club by contacting your Ford or Lincoln Mercury dealer Similarly in Canada you may purchase additional coverage beyond the basic coverage period by consulting the Ford Roadside Assistance Club brochure or by calling 1 877 294 CLUB 1 877 894 2582 HAZARD FLASHER A Use only in an emergency to warn traffic of vehicle breakdown approaching danger etc The hazard flashers can be operated when the ignition is off e Slide the hazard flasher control to the right to activate the hazard flashers simultaneously e Slide the control to the left to turn the flashers off RESETTING THE FUEL PUMP SHUT OFF SWITCH The fuel pump shut off switch is a device intended to stop the electric fuel pump when your vehicle has been involved in a substantial jolt After a collision if the engine cranks but does not start the fuel pump shut off switch may have been activated 106 Roadside emergencies e Right side of the trunk behin
47. and level 5 Turn the heater fan on in both vehicles to protect any electrical surges Turn all other accessories off 119 Roadside emergencies Connecting the jumper cables 1 Connect the positive booster cable to the positive terminal of the discharged battery Note In the illustrations lightning bolts are used to designate the assisting boosting battery 2 Connect the other end of the positive cable to the positive terminal of the assisting battery 120 Roadside emergencies 3 Connect the negative cable to the negative terminal of the assisting battery 4 Make the final connection of the negative cable to an exposed metal part of the stalled vehicle s engine away from the battery and the carburetor fuel injection system Do not use fuel lines engine rocker covers or the intake manifold as grounding points Do not connect the end of the second cable to the negative terminal of the battery to be jumped A spark may cause an explosion of the gases that surround the battery 5 Ensure that the cables are clear of fan blades belts moving parts of both engines or any fuel delivery system parts 121 Roadside emergencies Jump starting 1 Start the engine of the booster vehicle and run the engine at moderately increased speed 2 Start the engine of the disabled vehicle 3 Once the disabled vehicle has been started run both engines for an additional three
48. ant safety precautions Do not overfill the fuel tank The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire The fuel system may be under pressure If the fuel filler cap is venting vapor or if you hear a hissing sound wait until it stops before completely removing the fuel filler cap Otherwise fuel may spray out and injure you or others 153 Maintenance and care If you do not use the proper fuel filler cap excessive pressure or vacuum in the fuel tank may damage the fuel system or cause the fuel system to work improperly in a collision which may result in possible personal injury Automotive fuels can cause serious injury or death if misused or mishandled A Gasoline may contain benzene which is a cancer causing agent Observe the following guidelines when handling automotive fuel e Extinguish all smoking materials and any open flames before fueling your vehicle e Always turn off the vehicle before fueling e Automotive fuels can be harmful or fatal if swallowed Fuel such as gasoline is highly toxic and if swallowed can cause death or permanent injury If fuel is swallowed call a physician immediately even if no symptoms are immediately apparent The toxic effects of fuel may not be visible for hours e Avoid inhaling fuel vapors Inhaling too much fuel vapor of any kind can lead to eye and respiratory tract irritation In severe cases excessive or prolonged breathing of f
49. ase your fuel economy when you travel at cruising speeds Driving Overdrive may not be appropriate for certain terrains If the transaxle shifts back and forth between third and fourth gears while you are driving hilly roads or if your vehicle requires additional power for climbing hills shift into D Drive 95 Driving D Drive D Drive eliminates the needless shifting between third and fourth gears that your vehicle may do when driving in hilly terrain It also gives more engine braking than overdrive to slow your vehicle on downgrades L Low Use L Low when added engine braking is desired or when descending steep hills The automatic transaxle will shift into the proper gear to ascend any grade without any need to shift to L Low Do not go faster than 61 km h 88 mph when in this gear You can upshift from L Low to D overdrive at any time When parking do not use the gearshift in place of the parking brake Always set the parking brake fully and make sure that the gearshift is securely latched in Park P Turn off the ignition whenever you leave your vehicle Never leave your vehicle unattended while it is running If you do not take these precautions your vehicle may move unexpectedly and injure someone 96 Driving MANUAL TRANSAXLE OPERATION IF EQUIPPED lt Using the clutch Vehicles equipped with a manual transaxle have a starter interrupt interlock that prevents cranking of t
50. ation of the air bag system Cleaning the instrument cluster lens Clean with a damp cloth then dry with a dry cloth Do not use household or glass cleaners as these may damage the lens Cleaning seats equipped with side air bags Remove dust and loose dirt with a whisk broom or a vacuum cleaner Remove fresh spots immediately Follow the directions that come with the cleaner Do not saturate the seat cover with upholstery cleaner 173 Maintenance and care Do not use chemical solvents or strong detergents when cleaning the seat mounted side air bag Such products could contaminate the side air bag system and affect performance of the side air bag in a collision Woodtone trim Wipe stains with a soft cloth and a multi purpose cleaning solution Inside windows Use Ultra Clear Spray Glass Cleaner E4AZ 19C507 AA for the inside windows if they become fogged Cleaning and maintaining the safety belts Clean the safety belts with a mild soap solution recommended for cleaning upholstery or carpets Do not bleach or dye the belts because these actions may weaken the belt webbing Check the safety belt system periodically to make sure there are no nicks wear or cuts If your vehicle has been involved in an accident refer to the Safety belt maintenance section in the Seating and safety restraints chapter Cleaning leather seats if equipped To clean simply use a soft cloth dampened with water and a mild soap Wipe the lea
51. ay cause the engine to stumble or stall In addition such systems may be damaged or their performance may be affected by operating your vehicle Citizens band CB transceivers garage door openers and other transmitters with outputs of five watts or less will not ordinarily affect your vehicle s operation e Ford cannot assume responsibility for any adverse effects or damage that may result from the use of such equipment ORDERING ADDITIONAL OWNER S LITERATURE To order the publications in this portfolio Make checks payable to HELM INCORPORATED P O Box 07150 Detroit Michigan 48207 For a free publication catalog order toll free 1 800 782 4356 Monday Friday 8 00 a m 6 00 p m EST for credit card holders only Obtaining a French owner s guide French Owner s Guides can be obtained from your dealer or by writing to Ford Motor Company of Canada Limited Service Publications P O Box 1580 Station B Mississauga Ontario L4Y 4G3 192 Reporting safety defects REPORTING SAFETY DEFECTS U S ONLY If you believe that your vehicle has a defect that could cause a crash or could cause injury or death you should immediately inform the National Highway Traffic Safety Administration NHTSA in addition to notifying Ford Motor Company If NHTSA receives similar complaints it may open an investigation and if it finds that a safety defect exists in a group of vehicles it may order a recall and remedy campaign
52. can be properly restrained Never let a passenger hold a child on his or her lap while the vehicle is moving The passenger cannot protect the child from injury in a collision All occupants of the vehicle including the driver should always properly wear their safety belts even when an air bag SRS is provided It is extremely dangerous to ride in a cargo area inside or outside of a vehicle In a collision people riding in these areas are more likely to be seriously injured or killed Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts Be sure everyone in your vehicle is in a seat and using a safety belt properly In a rollover crash an unbelted person is significantly more likely to die than a person wearing a seat belt Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and one tongue that are designed to be used as a pair 1 Use the shoulder belt on the outside shoulder only Never wear the shoulder belt under the arm 2 Never swing the safety belt around your neck over the inside shoulder 3 Never use a single belt for more than one person Always transport children 12 years old and under in the back seat and always properly use appropriate child restraints Automatic locking mode In this mode the shoulder belt is automatically pre locked The belt will still retract to remove any slack in the shoulder belt The
53. chigan 48121 1 800 392 3673 FORD TDD for the hearing impaired 1 800 232 5952 In Canada Customer Assistance Centre Ford Motor Company of Canada Limited P O Box 2000 Oakville Ontario L6J 5E4 1 800 565 3673 FORD 183 Customer assistance If you own a Lincoln vehicle and are away from home when your vehicle needs service or if you need more help than the dealership could provide after following the steps described above contact the Ford Customer Assistance Center to find an authorized dealership to help you In the United States Ford Motor Company Customer Assistance Center 16800 Executive Plaza Drive P O Box 6248 Dearborn Michigan 48121 1 800 521 4140 TDD for the hearing impaired 1 800 232 5952 In Canada Customer Assistance Centre Ford Motor Company of Canada Limited P O Box 2000 Oakville Ontario L6J 5E4 1 800 565 3673 FORD In order to help you service your Ford or Lincoln Mercury vehicle please have the following information available when contacting a Customer Assistance Center e Your telephone number home and business e The name of the dealer and the city where the dealership is located e The year and make of your vehicle e The date of vehicle purchase e The current odometer reading e The vehicle identification number VIN If you still have a complaint involving a warranty dispute you may wish to contact the Dispute Settlement Board U S or the Mediation Arbitration Pro
54. curacy of your speedometer SNOW TIRES AND CHAINS Snow tires must be the same size and grade as the tires you currently have on your vehicle The tires on your vehicle have all weather treads to provide traction in rain and snow However in some climates you may need to use snow tires and chains If you need to use snow tires and chains it is 152 Maintenance and care recommended that steel wheels are used of the same size and specifications as those originally installed Follow these guidelines when using snow tires and chains e Do not use tire chains on aluminum wheels Chains may chip the wheels Use only SAE Class S chains e Install chains securely verifying that the chains do not touch any wiring brake lines or fuel lines e Drive cautiously If you hear the chains rub or bang against your vehicle stop and re tighten the chains If this does not work remove the chains to prevent damage to your vehicle If possible avoid fully loading your vehicle e Do not use tire chains with 38 cm 15 inch wheel tire options Using chains on this size tire may cause damage to steering suspension and or body components e Remove the tire chains when they are no longer needed Do not use tire chains on dry roads e The suspension insulation and bumpers will help prevent vehicle damage Do not remove these components from your vehicle when using snow tires and chains WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS wb Import
55. d as follows Fuse Relay Fuse Amp Passenger Compartment Location Rating Fuse Panel Description R WIPER HAZARD ROOM ENGINE MIRROR DOOR LOCK Daytime Running Lamps Liftgate Wiper Washer Hazard Flasher Engine Controls Remote Anti Theft Personality CRAP Module Radio Shift Lock Courtesy Lamps Starting System Warning Chime Air Bag Engine Controls TR Sensor Power Mirrors Radio Remote Keyless Entry RKE Power Door Locks HORN AIR COND A C Heater ABS METER 1 Backup Lamps Engine Controls Instrument Cluster Rear Window Defrost Shift Lock Warning Chime Turn Signal Switch STOP TAIL SUN ROOF Exterior Lamps Instrument Illumination Speed Control Monitor INJECTOR Sensor BLOWER 30A CB A C Heater A A A A A A A A WIPER A Wiper Washer Blower Relay A A A A A A A A 10 5 10 15 5A 0 15 15 0 0 15 15 15 10 0 10 10 15 10 112 Roadside emergencies Power distribution box The power distribution box is located in the engine compartment The power distribution box contains high current fuses that protect your vehicle s main electrical systems from overloads Always disconnect the battery before servicing high current fuses Always replace the cover to the Power Distribution Box before reconnecting the battery or refilling fluid reservoirs If the battery has been disconnected and reconnected refer to the Battery section of the Maintenance and care c
56. d by inserting the key and turning the ignition to ON ACC or by pressing the panic control Pressing the trunk control will prevent the alarm from sounding until the trunk is closed again Using the ignition key to unlock doors trunk will not disarm the anti theft system Disarming a triggered anti theft system Press either the unlock or panic control to disarm the system A triggered system may also be disarmed by inserting the key and turning the ignition to ACC or ON 59 Seating and safety restraints SEATING Adjustable head restraints Your vehicle s seats may be equipped with head restraints which are vertically adjustable The purpose of these head restraints is to help limit head motion in the event of a rear collision To properly adjust your head restraints lift the head restraint so that it is located directly behind your head or as close to that position as possible Refer to the following to raise and lower the head restraints The head restraints can be moved 4 up and down Push control to lower head restraint LT O gt Adjusting the front manual seat Never adjust the driver s seat or seatback when the vehicle is moving Do not pile cargo higher than the seatbacks to reduce the risk of injuring people in a collision or sudden stop 60 Seating and safety restraints Always drive and ride with your seatback upright and the lap belt snug and low across the hips Reclining the seatb
57. d review Oral presentations If you would like to make an oral presentation indicate YES to question 6 on the application While it is your right to make an oral presentation before the Board this is not a requirement and the Board will decide the case whether or not an oral presentation is made Oral presentation may be requested by the Board as well Making a decision Board members review all available information related to each complaint including oral presentations and arrive at a fair and impartial decision Board review may be terminated at any time by either party Every effort is made to decide the case within 40 days of the date that all requested information is received by the Board Since the Board generally meets once a month it may take longer for the Board to consider some cases After a case is reviewed the Board mails you a decision letter and a form on which to accept or reject the Board s decision The decisions of the Board are binding on Ford and in some cases on the dealer but not on consumers who are free to pursue other remedies available to them under state or federal law To Request a DSB Brochure Application For a brochure application speak to your dealer or write call to the Board at the following address phone number Dispute Settlement Board P O Box 5120 Southfield MI 48086 5120 1 800 428 3718 187 Customer assistance You may also contact the North American Customer Assistance
58. d the trunk liner e Driver s foot well behind the kick panel The fuel pump shut off switch depending on application is located on the right side of the trunk behind the trunk liner or in the driver s foot well behind the kick panel 107 Roadside emergencies Use the following procedure to reset the fuel pump shut off switch 1 Turn the ignition to the OFF position 2 Check the fuel system for leaks 3 If no fuel leak is apparent reset the fuel pump shut off switch by pushing in on the reset button 4 Turn the ignition to the ON position Pause for a few seconds and return the key to the OFF position 5 Make a further check for leaks in the fuel system FUSES AND RELAYS Fuses If electrical components in the vehicle are not working a fuse may have blown Blown fuses are identified by a broken wire within the fuse Check the appropriate fuses before replacing any electrical components Always replace a fuse with one that has the specified amperage rating Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire 108 Roadside emergencies Standard fuse amperage rating and color COLOR Fuse Mini Standard Maxi Cartridge Fuse Link Rating Fuses Fuses Fuses Cartridge 2A Grey Gry 3A Violet Violet Tan 75A Brown Brown a
59. d under the bottom left corner of the instrument panel 2 Go to the front of the vehicle and release the auxiliary latch that is located under the front center of the hood 3 Lift the hood and secure it with the prop rod 129 Maintenance and care IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 2 0L SOHC l4 engine NQF S AN RSENS oS Engine oil dipstick Brake fluid reservoir Transmission fluid dipstick automatic transaxle Battery Air filter assembly Engine oil filler cap Power steering fluid reservoir Engine coolant reservoir Oo ONonrtFFrwN rH Windshield washer fluid reservoir 130 Maintenance and care 2 0L DOHC Zetec engine Transmission fluid dipstick automatic transaxle 1 2 3 4 5 6 T 8 9 Battery Air filter assembly Engine oil filler cap Engine oil dipstick Power steering fluid reservoir Engine coolant reservoir Windshield washer fluid reservoir Brake fluid reservoir 131 Maintenance and care ENGINE OIL 927 Checking the engine oil Refer to the Scheduled Maintenance Guide for the appropriate intervals for checking the engine oil 1 Make sure the vehicle is on level ground 2 Turn the engine off and wait a few minutes for the oil to drain
60. damage High fluid levels can be caused by an overheating condition Adjusting automatic transmission fluid levels Before adding any fluid make sure the correct type is used The type of fluid used is normally indicated on the dipstick and also in the Lubricant specifications section in the Capacities and specifications chapter Use of a non approved automatic transmission fluid may cause internal transaxle component damage If necessary add fluid in 250 mL 1 2 pint increments through the filler tube until the level is correct If an overfill occurs excess fluid should be removed by a qualified technician aie C 65 C An overfill condition of transmission fluid may cause shift and or engagement concerns and or possible damage 144 Maintenance and care Checking and adding manual transmission fluid 1 Clean the filler plug 2 Remove the filler plug and inspect the fluid level 3 Fluid level should be at bottom of the opening 4 Add enough fluid through the filler opening so that the fluid level is at the bottom of the opening am 5 Install and tighten the fill plug securely Use only fluid that meets Ford specifications Refer to the Capacities and specifications chapter 145 Maintenance and care BATTERY Your vehicle is equipped with a Motorcraft maintenance free battery which normally does not require additional water during its lif
61. e Customer Assistance chapter for a list of Ford approved cleaners polishes and waxes Washing your vehicle Wash your vehicle regularly with cold or lukewarm water Never use strong detergents or soap If your vehicle is particularly dirty use a quality car wash detergent Always use a clean sponge washing glove or similar device and plenty of water for best results To avoid spots avoid washing when the hood is still warm immediately after or during exposure to strong sunlight During winter months it is especially important to wash the vehicle on a regular basis Large quantities of dirt and road salt are difficult to remove and also cause damage to the vehicle Any gasoline spilled on the vehicle or deposits such as bird droppings should be washed and sponged off as soon as possible Deposits not removed promptly can cause damage to the vehicle s paintwork Remove any exterior accessories such as antennas before entering a car wash If you have wax applied to the vehicle at a commercial car wash it is recommended that you clean the wiper blades and windshield as described in Cleaning the wiper blades and windshield After washing apply the brakes several times to dry them 170 Maintenance and care Waxing your vehicle Waxing your vehicle on a regular basis will reduce minor scratches and paint damage Wax when water stops beading on the surface This could be every three or four months depending on operati
62. e nearest Ford affiliate office If you buy your vehicle in North America and then relocate outside of the U S or Canada register your vehicle identification number VIN and new address with Ford Motor Company Worldwide Direct Market Operations FORD CAR CARE PRODUCTS FOR YOUR VEHICLE Ford has many quality products available from your dealer to clean your vehicle and protect its finishes These quality products have been specifically engineered to fulfill your automotive needs they are custom designed to complement the style and appearance of your vehicle Each product is made from high quality materials and that meet or exceed Ford s rigid specifications For best results use the following or products of equivalent quality Ford Custom Clearcoat Polish Ford Custom Silicone Gloss Polish Ford Custom Vinyl Protectant not available in Canada Motorcraft Vinyl Conditioner Canada only 189 Customer assistance Ford Deluxe Leather and Vinyl Cleaner not available in Canada Motorcraft Vinyl Cleaner Canada only Ford Extra Strength Tar and Road Oil Remover not available in Canada Ford Extra Strength Upholstery Cleaner Canada only Ford Extra Strength Upholstery Cleaner not available in Canada Ford Metal Surface Cleaner Ford Multi Purpose Cleaner Motorcraft Car Wash Concentrate Motorcraft Carlite Glass Cleaner Ford Spot and Stain Remover Ford Super Premium Tire and Trim Dressing Ford Triple Clean Ford Ultr
63. e next listenable station up the frequency band Seek function in tape mode e Press d to listen to the previous selection on the tape e Press ie to listen to the next selection on the tape Scan function The scan function works in radio or tape mode 20 Controls and features Scan function in radio mode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band Press the control again to stop the scan mode Scan function in tape mode Press the SCAN control to hear a short sampling of all selections on the tape The tape scans in a forward direction At the end of the tape s first side direction automatically reverses to the opposite side of the tape To stop on a particular selection press the control again Radio station memory preset The radio is equipped with six station memory preset controls These controls can be used to select up to six preset AM stations and twelve FM stations six in FM1 and six in FM2 Setting memory preset stations 1 Select the frequency band with the AM FM select control 2 Select a station Refer to Tune adjust or Seek function for more information on selecting a station 3 Press and hold a memory preset control until the sound returns G 4 e e indicating the station is held in memory on the control you selected Bass treble adjust e The bass adjust control allows you to increase or decrease the audio sy
64. e of service However for severe usage or in high temperature climates check the battery electrolyte level Refer to the Scheduled Maintenance Guide for the service interval schedules Keep the electrolyte level in each cell up to the level indicator Do not overfill the battery cells If the electrolyte level in the battery is low you can add plain tap water to the battery as long as you do not use hard water water with a high mineral or alkali content If possible however try to only fill the battery cells with distilled water If the battery needs water often have the charging system checked If your battery has a cover shield make sure it is reinstalled after the battery has been cleaned or replaced For longer trouble free operation keep the top of the battery clean and dry Also make certain the battery cables are always tightly fastened to the battery terminals If you see any corrosion on the battery or terminals remove the cables from the terminals and clean with a wire brush You can neutralize the acid with a solution of baking soda and water Batteries normally produce explosive gases which can cause personal injury Therefore do not allow flames sparks or lighted substances to come near the battery When working near the battery always shield your face and protect your eyes Always provide proper ventilation 146 Maintenance and care When lifting a plastic cased battery excessive pressure
65. earance e try to repair the temporary spare tire or remove it from its wheel e use the wheel for any other type of vehicle Tire change procedure 1 Park on a level surface activate hazard flashers and set the parking brake When one of the front wheels is off the ground the transaxle alone will not prevent the vehicle from moving or slipping off the jack even if the vehicle is in P Park automatic transaxle or R Reverse manual transaxle To prevent the vehicle from moving when you change a tire be sure the parking brake is set then block Gn both directions the wheel that is diagonally opposite other side and end of the vehicle to the tire being changed If the vehicle slips off the jack you or someone else could be seriously injured 116 Roadside emergencies 2 Place gearshift lever in P Park automatic transaxle or R Reverse manual transaxle turn engine OFF and block the diagonally opposite wheel e Automatic e Manual 3 Remove the jack jack handle and spare tire 117 Roadside emergencies 4 Loosen each wheel lug nut one half turn counterclockwise but do not remove them until the wheel is raised off the ground 5 Put the jack in the jack notch next to the door of the tire you are changing Turn the handle clockwise until the wheel is completely off the ground 6 Remove the lug nuts with the lug wrench 7 Replace the flat tire with the spare tire making sure
66. efer to this manual for proper hook up and towing procedures for your vehicle TOWING BEHIND ANOTHER VEHICLE If your vehicle has an automatic transaxle it cannot be flat towed with all wheels on the ground front wheel dollies must be used If your vehicle has an manual transaxle your vehicle can be flat towed with all wheels on the ground 124 Maintenance and care SERVICE RECOMMENDATIONS To help you service your vehicle e We highlight do it yourself items in the engine compartment for easy location e We provide a Scheduled Maintenance Guide which makes tracking routine service easy If your vehicle requires professional service your dealership can provide necessary parts and service Check your Warranty Guide to find out which parts and services are covered Use only recommended fuels lubricants fluids and service parts conforming to specifications Motorcraft parts are designed and built to provide the best performance in your vehicle PRECAUTIONS WHEN SERVICING YOUR VEHICLE Be especially careful when inspecting or servicing your vehicle e Do not work on a hot engine e When the engine is running keep loose clothing jewelry or long hair away from moving parts e Do not work on a vehicle with the engine running in an enclosed space unless you are sure you have enough ventilation e Keep all lit cigarettes open flames and other lit material away from the battery and all fuel related parts If you di
67. elts For more information refer to the Seating and safety restraints chapter Brake system warning Momentarily illuminates when the ignition is turned to the ON P C position Also illuminates if the parking brake is engaged If the BR AKE brake warning lamp does not illuminate at these times seek service immediately Illumination after releasing the parking brake indicates low brake fluid level and the brake system should be inspected immediately Shift indicator light if equipped To maximize fuel economy the shift indicator light illuminates when the manual transmission should be shifted to the next highest gear 10 Instrumentation Anti lock brake system ABS If equipped Momentarily illuminates when the ignition is turned to the ON position If the light does not illuminate momentarily at start up remains on or continues to flash the ABS needs to be serviced With the ABS light on the anti lock brake system is disabled and normal braking is still effective unless the brake warning light also remains illuminated with the parking brake released Turn signal Illuminates when the left or right turn signal or the hazard lights are turned on If one or both of the a gt indicators stay on continuously or flash faster check for a burned out turn signal bulb Refer to Exterior bulbs in the Maintenance and care chapter High beams Illuminates when the high beam headlamps are turned on D A
68. eter reading 5 Follow one of the simple calculations in order to determine fuel economy Multiply liters used by 100 then divide by total kilometers traveled Divide total miles traveled by total gallons used Keep a record for at least one month and record the type of driving city or highway This will provide an accurate estimate of the vehicle s fuel economy under current driving conditions Additionally keeping records during summer and winter will show how temperature impacts fuel economy In general lower temperatures give lower fuel economy Driving style good driving and fuel economy habits Give consideration to the lists that follow and you may be able to change a number of variables and improve your fuel economy Habits e Smooth moderate operation can yield up to 10 savings in fuel e Steady speeds without stopping will usually give the best fuel economy e Idling for long periods of time greater than one minute may waste fuel 159 Maintenance and care Anticipate stopping slowing down may eliminate the need to stop Sudden or hard accelerations may reduce fuel economy Slow down gradually Driving at reasonable speeds traveling at 88 km h 55 mph uses 15 less fuel than traveling at 105 km h 65 mph Revving the engine before turning it off may reduce fuel economy Using the air conditioner or defroster may reduce fuel economy You may want to turn off the speed control in hilly terrain
69. f asphalt and concrete A tire marked C may have poor traction performance The traction grade assigned to this tire is based on straight ahead braking traction tests and does not include acceleration cornering hydroplaning or peak traction characteristics Temperature A B C The temperature grades are A the highest B and C representing the tire s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel Sustained high temperature can cause the material of the tire to degenerate and reduce tire life and excessive temperature can lead to sudden tire failure The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No 109 Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law 150 Maintenance and care The temperature grade for this tire is established for a tire that is properly inflated and not overloaded Excessive speed underinflation or excessive loading either separately or in combination can cause heat buildup and possible tire failure SERVICING YOUR TIRES Checking the tire pressure e Use an accurate tire pressure gauge e Check the tire pressure when tires are cold after the vehicle has been parked for at least one hour or has been driven less than 5 km 3 miles e Adj
70. f fuel that is added will be less than the advertised capacity since there is fuel still in the tank The ignition must be in the ON position for this lamp to illuminate The lamp will also illuminate for several seconds after the ignition is turned to the ON position regardless of the fuel level to ensure your bulb is working Instrumentation Service engine soon Your vehicle is equipped with a SERVICE computer that monitors the engine s emission control system This SOON system is commonly known as the On Board Diagnostics System OBD II The OBD II system protects the environment by ensuring that your vehicle continues to meet government emission standards The OBD II system also assists the service technician in properly servicing your vehicle The Service Engine Soon indicator light illuminates when the ignition is first turned to the ON position to check the bulb If it comes on after the engine is started one of the engine s emission control systems may be malfunctioning The light may illuminate without a driveability concern being noted The vehicle will usually be drivable and will not require towing What you should do if the Service Engine Soon light illuminates Light turns on solid This means that the OBD II system has detected a malfunction Temporary malfunctions may cause your Service Engine Soon light to illuminate Examples are 1 The vehicle has run out of fuel The engine may misfire or run poorly 2
71. ffixed FGAWR XXXXXX KXXXXXX RGAWR XXXXXXXXXXXXXX THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL to a vehicle and prescribe where the MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE The Certineation Lael iseme on TT TMM THT the front door latch pillar on the MAXIMUM LOAD OCCUPANTS LUGGAGE XXXKG XXXXLB driver s side OCCUPANTS X TOTAL X FR X 2ND X RR OCCUPANTS LUGGAGE XX XXXKG XXXXLB TIRE XXXX XXXXX XXX X XXXKG XXXXLB PRESSURE FR XXX kPa 33 PSI COLD PRESSURE RR XXX kPa 33 PSI COLD TRAILER TOWING SEE OWNER GUIDE EXT PNT XXXXXX XXXXXX_ RC XX DSO XXXX_ F0000 BARTINTTR TP PS TR AXLE TR SPR T0000 X XX XXX X XX X XXXX UTC VFOHT 15294A10 GA 180 Vehicle identification number The vehicle identification number is attached to a metal tag and is Capacities and specifications located on the driver side instrument panel Please note that EEN in the graphic XXXX is representative of your vehicle ax identification number Engine number The engine number the last eight numbers of the vehicle identification number is stamped on the engine block and transmission 181 Customer assistance Ford Extended Service Plan You can get more protection for your new car or light truck by purchasing Ford Extended Service Plan Ford ESP coverage Ford ESP is an optional service contract which is backed by Ford Motor Company or Ford Motor Service Company in the U S a
72. frequency information The Federal Communications Commission FCC and the Canadian Radio and Telecommunications Commission CRTC establish the frequencies AM and FM stations may use for their broadcasts Allowable frequencies are AM 530 540 1600 1610 kHz FM 87 7 87 9 107 7 107 9 MHz Not all frequencies are used in a given area Radio reception factors Three factors can affect radio reception e Distance strength The further an FM signal travels the weaker it is The listenable range of the average FM station is approximately 40 km 24 miles This range can be affected by signal modulation Signal modulation is a process radio stations use to increase their strength volume relative to other stations e Terrain Hills mountains and tall buildings between your vehicle s antenna and the radio station signal can cause FM reception problems Static can be caused on AM stations by power lines electric fences traffic lights and thunderstorms Moving away from an interfering structure out of its shadow returns your reception to normal e Station overload Weak signals are sometimes captured by stronger signals when you pass a broadcast tower A stronger signal may temporarily overtake a weaker signal and play while the weak station frequency is displayed The audio system automatically switches to single channel reception if it will improve the reception of a station normally received in stereo 35 Controls and feat
73. gears before you shift into R Reverse This is a special lockout feature which prevents you from shifting into R Reverse when you downshift from 5 Fifth VEHICLE LOADING Before loading a vehicle familiarize yourself with the following terms e Base Curb Weight Weight of the vehicle including any standard equipment fluids lubricants etc It does not include passengers or aftermarket equipment e Payload Combined maximum allowable weight of cargo passengers and optional equipment The payload equals the gross vehicle weight rating minus base curb weight e GVW Gross Vehicle Weight Base curb weight plus payload weight The GVW is not a limit or a specification e GVWR Gross Vehicle Weight Rating Maximum total weight of the base vehicle passengers optional equipment and cargo The GVWR is specific to each vehicle and is listed on the Safety Compliance Label on the driver s door pillar e GAWR Gross Axle Weight Rating Carrying capacity for each axle system The GAWR is specific to each vehicle and is listed on the Safety Compliance Label on the driver s door pillar e GCW Gross Combined Weight The combined weight of the towing vehicle including passengers and cargo and the trailer o GCWR Gross Combined Weight Rating Maximum combined weight of towing vehicle including passengers and cargo and the trailer The GCWR indicates the maximum loaded weight that the vehicle is designed to tow 100 Driving e
74. gram Canada In some states in the U S you must directly notify Ford in writing before pursuing remedies under your state s warranty laws Ford is also allowed a final repair attempt in some states In the United States a warranty dispute must be submitted to the Dispute Settlement Board before taking action under the Magnuson Moss Warranty Act or to the extent allowed by state law before pursuing replacement or repurchase remedies provided by certain state laws This 184 Customer assistance dispute handling procedure is not required prior to enforcing state created rights or other rights which are independent of the Magnuson Moss Warranty Act or state replacement or repurchase laws THE DISPUTE SETTLEMENT BOARD U S ONLY The Dispute Settlement Board is e an independent third party arbitration program for warranty disputes e available free to owners and lessees of qualifying Ford Motor Company vehicles The Dispute Settlement Board may not be available in all states Ford Motor Company reserves the right to change eligibility limitations modify procedures and or to discontinue this service without notice and without incurring obligations per applicable state law What kinds of cases does the Board review Unresolved warranty repair concerns or vehicle performance as designed concerns on Ford and Lincoln Mercury cars and Ford and Lincoln Mercury light trucks which are within the terms of any applicable written new veh
75. hapter Coupe The high current fuses are coded as follows EA lt L 2 g z lt a o ag es zS ES aS zs Wo wo Sr aot Lo aT 2 a Te O fo 0 TS HEADLAMP k BRS 108 RELAY FUEL PUMP 20A HEADLH 10a HEAD RH 10A NS USE THE DESIGNATED FUSES ONLY J Fuse Relay Fuse Amp Power Distribution Box Description Location Rating FUEL INJ 30A Air Bags Constant Control Relay Module PCM Relay Generator DEFOG Rear Window Defrost MAIN 100A Overall Circuit Protection 113 Roadside emergencies Fuse Relay Fuse Amp Power Distribution Box Description Location Rating BTN 40A Hazard Stop Door Lock Tail Room and Horn Fuses of the I P Fuse Panel ABS Main Relay COOLING 40A Constant Control Relay Module Cooling FAN Fan OBD II 10A Data Link Connector DLC Instrument Cluster FUEL 20A Constant Control Relay Module Fuel PUMP Pump HEAD RH HEAD LH Fuse Link Cartridge Fuse Sedan N Z 2 lt L z2 S z lt a o a8 g3 lt s ES as zs Wo wo p ut to a R Q gt 8 1S HEADLAMP e OBDII y RELAY FUEL PUMP 20A S __HEADLH10A _ HEAD RH 10A J USE THE DESIGNATED FUSES ONLY 114 Roadside emergencies The high current fuses are coded as follows Fuse Relay Fuse Amp Power Distribution Box Descripti
76. he engine unless the clutch pedal is depressed When starting a vehicle with a manual transaxle you must 1 Put the gearshift lever in the neutral position 2 Hold down the brake pedal 3 Depress the clutch pedal 4 Turn the ignition key to 4 START then let the engine idle for a few seconds 5 Release the brake pedal then slowly release the clutch pedal while pressing down slowly on the accelerator pedal Do not drive with your foot resting on the clutch pedal and do not use the clutch pedal to hold your vehicle at a standstill while waiting on a hill These actions will seriously reduce clutch life 97 Driving Parking your vehicle 1 Apply the brake and shift into the neutral position 2 Set the parking brake 3 Shift into 1 First 98 Driving 4 Turn engine off and remove the key Do not park your vehicle in Neutral it may move unexpectedly and injure someone Use 1 First gear and set the parking brake fully Recommended shift speeds Upshift according to the following charts for best fuel economy Reverse Make sure that your vehicle is at a complete stop before you shift into R Reverse Failure to do so may damage the transaxle 99 Driving Put the gearshift lever into the neutral position and wait at least three seconds before shifting into R Reverse You can shift into R Reverse only by moving the gearshift lever from left of 3 Third and 4 Fourth
77. her strap only to the appropriate tether anchor as shown The tether strap may not work properly if attached somewhere other than the correct tether anchor 1 Position the child safety seat on the passenger seat cushion 2 Route the child safety seat tether strap over the back of the seat 82 Seating and safety restraints For vehicles with adjustable head restraints route the tether strap under the head restraint and between the head restraint posts otherwise route the tether strap over the top of the seatback 3 Locate the correct anchor for the selected seating position 4 Clip the tether strap to the L SN anchor as shown If the tether strap is clipped incorrectly the child safety seat may not be retained properly in the event of a collision ha 5 Refer to the Installing child safety seats in combination lap and shoulder belt seating positions section of this chapter for further instructions to secure the child safety seat 6 Tighten the child safety seat tether strap according to the manufacturer s instructions If the safety seat is not anchored properly the risk of a child being injured in a collision greatly increases 83 Starting PREPARING TO START YOUR VEHICLE Engine starting is controlled by the powertrain control system This system meets all Canadian Interference Causing Equipment standard requirements regulating the impulse electrical field strength of radio noise When starting a fuel i
78. hicle to another Ford Motor Company or Ford of Canada dealership authorized for warranty repairs Certain warranty repairs require special training though so not all dealers are authorized to perform all warranty repairs That means that depending on the warranty repair needed the vehicle may need to be taken to another dealer If a particular dealership can not assist you then contact the Customer Assistance Center 182 Customer assistance If you have questions or concerns or are unsatisfied with the service you are receiving follow these steps 1 Contact your Sales Representative or Service Advisor at your selling servicing dealership 2 If your inquiry or concern remains unresolved contact the Sales Manager or Service Manager at the dealership 3 If the inquiry or concern cannot be resolved at the dealership level please contact the Ford Customer Assistance Center Ford Motor Company and Ford of Canada dealerships also carry quality parts and accessories providing you with equipment reliability Away from home If you own a Ford or Mercury vehicle and are away from home when your vehicle needs service or if you need more help than the dealership could provide after following the steps described above contact the Ford Customer Assistance Center to find an authorized dealership to help you In the United States Ford Motor Company Customer Assistance Center 16800 Executive Plaza Drive P O Box 6248 Dearborn Mi
79. hip management recognized for their business leadership qualities What the Board needs To have your case reviewed you must complete the application in the DSB brochure and mail it to the address provided on the application form Some states will require you to use certified mail with return receipt requested Your application is reviewed and if it is determined to be eligible you will receive an acknowledgment indicating e the file number assigned to your application e the toll free phone number of the DSB s independent administrator Your dealership and a Ford Motor Company representative will then be asked to submit statements To properly review your case the Board needs the following information e legible copies of all documents and maintenance or repair orders relevant to the case e the year make model and Vehicle Identification Number VIN listed on your vehicle ownership license e the date of repair s and mileage at the time of occurrence s e the current mileage e the name of the dealer s who sold or serviced the vehicle e a brief description of your unresolved concern e a brief summary of the action taken by the dealer s and Ford Motor Company 186 Customer assistance e the names if known of all the people you contacted at the dealership s e a description of the action you expect to resolve your concern You will receive a letter of explanation if your application does not qualify for Boar
80. iately Do not drive if you smell exhaust fumes These fumes are harmful and could kill you Have the exhaust and body ventilation systems checked whenever e the vehicle is raised for service e the sound of the exhaust system changes e the vehicle has been damaged in a collision Engine exhaust some of its constituents and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm Important ventilating information If the engine is idling while the vehicle is stopped in an open area for long periods of time open the windows at least 2 5 cm one inch Adjust the heating or air conditioning if equipped to bring in fresh air Improve vehicle ventilation by keeping all air inlet vents clear of snow leaves and other debris 88 Driving BRAKES Your service brakes are self adjusting Refer to the scheduled maintenance guide for scheduled maintenance Occasional brake noise is normal and often does not indicate a performance concern with the vehicle s brake system In normal operation automotive brake systems may emit occasional or intermittent squeal or groan noises when the brakes are applied Such noises are usually heard during the first few brake applications in the morning however they may be heard at any time while braking and can be aggravated by environmental conditions such as cold heat moisture road dust salt or m
81. icle warranty are eligible for review except those involving e anon Ford product e anon Ford dealership e sales disputes between customer and dealer except those associated with warranty repairs or concerns with the vehicle s performance as designed e a request for reimbursement of consequential expenses unless a service or product concern is being reviewed e items not covered by the New Vehicle Limited Warranty including maintenance and wear items e alleged personal injury property damage claims e cases currently in litigation e vehicles not used primarily for family personal or household purposes except in states where the Dispute Settlement Board is required to review commercial vehicles e vehicles with non U S warranties Concerns are ineligible for review if the New Vehicle Limited Warranty has expired at receipt of your application and in certain states eligibility is dependent upon the customer s possession of the vehicle 185 Customer assistance Eligibility may differ according to state law For example see the unique brochures for California West Virginia Georgia and Wisconsin purchasers lessees Board membership The Board consists of e three consumer representatives e a Ford or Lincoln Mercury dealership representative Consumer candidates for Board membership are recruited and trained by an independent consulting firm The dealership Board member is chosen from Ford and Lincoln Mercury dealers
82. id static build up when filling an ungrounded fuel container e Place approved fuel container on the ground e DO NOT fill a fuel container while it is in the vehicle e Keep the fuel pump nozzle in contact with the fuel container while filling e DO NOT use a device that would hold the fuel pump handle in the fill position Fuel Filler Cap Your fuel tank filler cap has an indexed design with a 1 8 turn on off feature When fueling your vehicle 1 Turn the engine off 2 Carefully turn the filler cap counterclockwise 1 8 of a turn until it stops 3 Pull to remove the cap from the fuel filler pipe 4 To install the cap align the tabs on the cap with the notches on the filler pipe 5 Turn the filler cap clockwise 1 8 of a turn until it stops 155 Maintenance and care If the Service Engine Soon Check Engine indicator comes on and stays on when you start the engine the fuel filler cap may not be properly installed Turn off the engine remove the fuel filler cap align the cap properly and reinstall it If you must replace the fuel filler cap replace it with a fuel filler cap that is designed for your vehicle The customer warranty may be void for any damage to the fuel tank or fuel system if the correct genuine Ford or Motorcraft fuel filler cap is not used The fuel system may be under pressure If the fuel filler cap is venting vapor or if you hear a hissing sound wait until it stops before completely remo
83. if unnecessary shifting between third and fourth gear occurs Unnecessary shifting of this type could result in reduced fuel economy Warming up a vehicle on cold mornings is not required and may reduce fuel economy Resting your foot on the brake pedal while driving may reduce fuel economy Combine errands and minimize stop and go driving Maintenance Keep tires properly inflated and use only recommended size Operating a vehicle with the wheels out of alignment will reduce fuel economy Use recommended engine oil Refer to Lubricant Specifications Perform all regularly scheduled maintenance items Follow the recommended maintenance schedule and owner maintenance checks found in your vehicle Scheduled Maintenance Guide Conditions Heavily loading a vehicle or towing a trailer may reduce fuel economy at any speed Carrying unnecessary weight may reduce fuel economy approximately 0 4 km L 1 mpg is lost for every 180 kg 400 lb of weight carried Adding certain accessories to your vehicle for example bug deflectors rollbars light bars running boards ski luggage racks may reduce fuel economy Using fuel blended with alcohol may lower fuel economy 160 Maintenance and care e Fuel economy may decrease with lower temperatures during the first 12 16 km 8 10 miles of driving e Driving on flat terrain offers improved fuel economy as compared to driving on hilly terrain e Transmissions give their best fuel
84. in combination lap and shoulder belt seating positions 1 Position the child safety seat in a seat with a combination lap and shoulder belt An air bag can kill or injure a child in a child seat If you must use a forward facing child seat in the front seat move seat all the way back Children 12 and under should be properly restrained in the rear seat whenever possible 79 Seating and safety restraints 2 Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together 3 While holding the shoulder and lap belt portions together route the tongue through the child seat according to the child seat manufacturer s instructions Be sure the belt webbing is not twisted 4 Insert the belt tongue into the proper buckle the buckle closest to the direction the tongue is coming from for that seating position until you hear a snap and feel the latch engage Make sure the tongue is latched securely by pulling on it 80 Seating and safety restraints 5 To put the retractor in the automatic locking mode grasp the shoulder portion of the belt and pull downward until all of the belt is extracted and a click is heard ean 6 Allow the belt to retract The belt will click as it retracts to indicate it is in the automatic locking mode 7 Pull the lap belt portion across the child seat toward the buckle and pull up on the shoulder belt while pushing down with your knee on the child seat
85. in this guide Children must always be properly restrained Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position Failure to follow these instructions may increase the risk of injury in a collision Air bags can kill or injure a ri child in a child seat NEVER place a rear facing child seat in front of an active air bag If you must use a forward facing child seat in the front seat move the seat all the way back How does the air bag supplemental restraint system work The air bag SRS is designed to activate when the vehicle sustains longitudinal deceleration sufficient to cause the sensors to close an electrical circuit that initiates air bag inflation The fact that the air bags did not inflate in a collision does not mean that something is wrong with the system Rather it means the forces were not of the type sufficient to cause activation Air bags are designed to inflate in frontal and near frontal collisions not rollover side impact or rear impacts unless the collision causes sufficient longitudinal deceleration 74 Seating and safety restraints The air bags inflate and deflate rapidly upon activation After air bag deployment it is normal to notice a smoke like powdery residue or smell the burnt propellant This may consist of cornstarch talcum powder to lubricate the bag or sodium comp
86. ing or e Perform the programming procedure yourself Programming remote transmitters It is necessary to have all maximum of four original and or new of your remote transmitters available prior to beginning this procedure 56 Controls and features To program the transmitters yourself e Insert a key in the ignition and turn from 2 ACC to 3 ON eight times in rapid succession within 10 seconds with the eighth turn ending in the 3 ON position The doors will lock unlock to confirm that programming mode has been entered e Within 20 seconds program a remote transmitter by pressing any button on a transmitter The doors will lock unlock to confirm that the remote transmitter has been programmed If more than 20 seconds pass before pressing a remote transmitter button the programming mode will exit and the procedure will have to be repeated e Repeat the previous step to program additional remote transmitters The doors will lock unlock to confirm that each remote transmitter has been programmed e When you have completed programming the remote transmitters turn the ignition to 2 ACC or wait 20 seconds Again the doors will lock unlock to confirm programming has been completed Illuminated entry Interior lamps will illuminate when UNLOCK or PANIC control is pressed The lamps will illuminate for approximately 20 seconds or until the key is inserted in the ignition and turned to ON or until LOCK con
87. ing are aligned E NO jh s 4 Swing the left side of the air filter Se al housing closed and secure the Bt S Z A clamp DK Z 148 Maintenance and care WINDSHIELD WIPER BLADES Check the wiper blades at least twice a year or when they seem less effective Substances such as tree sap and some hot wax treatments used by commercial car washes reduce the effectiveness of wiper blades Checking the wiper blades If the wiper blades do not wipe properly clean both the windshield and wiper blades using undiluted windshield wiper solution or a mild detergent Rinse thoroughly with clean water To avoid damaging the blades do not use fuel kerosene paint thinner or other solvents Changing the wiper blades To replace the wiper blades 1 Pull the wiper arm away from the windshield and lock into the service position 2 Turn the blade at an angle from the wiper arm Push the lock pin gt manually to release the blade and pull the wiper blade down toward the windshield to remove it from the arm 3 Attach the new wiper to the wiper arm and press it into place until a click is heard INFORMATION ABOUT UNIFORM TIRE QUALITY GRADING New vehicles are fitted with tires that have a rating on them called Tire Quality Grades The Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width For example e Treadwear 200 Traction AA
88. intenance replacements or for service of components affecting emission control such non Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability 161 Maintenance and care Do not park idle or drive your vehicle in dry grass or other dry ground cover The emission system heats up the engine compartment and exhaust system which can start a fire Illumination of the Service Engine Soon light charging system warning light or the temperature warning light fluid leaks strange odors smoke or loss of engine power could indicate that the emission control system is not working properly Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment Do not make any unauthorized changes to your vehicle or engine By law vehicle owners and anyone who manufactures repairs services sells leases trades vehicles or supervises a fleet of vehicles are not permitted to intentionally remove an emission control device or prevent it from working Information about your vehicle s emission system is on the Vehicle Emission Control Information Decal located on or near the engine This decal identifies engine displacement and gives some tune up specifications Please consult your Warranty Guide for complete emission warranty information Readiness for Inspection Maintenance I M testing In some localities it may be a legal requirement to pass an I
89. into the oil pan 3 Set the parking brake and ensure the gearshift is securely latched in P automatic transaxle or 1st manual transaxle 4 Open the hood Protect yourself from engine heat 5 Locate and carefully remove the engine oil indicator dipstick e 2 0L SOHC I4 engine 132 Maintenance and care e 2 0L DOHC Zetec engine 6 Wipe the indicator clean Insert the indicator fully then remove it again e If the oil level is between the MIN and MAX marks the oil level is acceptable DO NOT ADD OIL If the oil level is below the MIN mark add enough oil to raise the level within the MIN MAX range Oil levels above the MAX mark may cause engine damage Some oil must be removed from the engine by a service technician 7 Put the indicator back in and ensure it is fully seated Adding engine oil 1 Check the engine oil For instructions refer to Checking the engine oil in this chapter 2 If the engine oil level is not within the normal range add only certified engine oil of the recommended viscosity Remove the engine oil filler cap and use a funnel to pour the engine oil into the opening 133 Maintenance and care 3 Recheck the engine oil level Make sure the oil level is not above the MAX mark on the engine oil level indicator dipstick 4 Install the indicator and ensure it is fully seated 5 Fully install the engine oil filler cap by turni
90. ion characteristics of the engine coolant and may cause engine damage refer to the chart on the coolant container to ensure the coolant concentration in your vehicle will provide adequate freeze protection at the temperatures in which you drive in the winter months If you drive in extremely hot climates it is still necessary to maintain the coolant concentration above 40 NEVER decrease the coolant concentration below 40 decreased engine coolant concentrations below 40 will decrease the corrosion protection characteristics of the engine coolant and may cause engine damage decreased engine coolant concentrations below 40 will decrease the freeze protection characteristics of the engine coolant and may cause engine damage refer to the chart on the coolant container to ensure the coolant concentration in your vehicle will provide adequate protection at the temperatures in which you drive 141 Maintenance and care Vehicles driven year round in non extreme climates should use a 50 50 mixture of engine coolant and distilled water for optimum cooling system and engine protection CHECKING AND ADDING POWER STEERING FLUID Check the power steering fluid Refer to the Scheduled Maintenance Guide for the service interval schedules If adding fluid is necessary use only MERCON ATF e Coupe e Sedan 1 Start the engine and let it run until it reaches normal operating temperature the engine coolant te
91. l e Push up to activate the right turn signal SPEED CONTROL IF EQUIPPED To turn speed control on e Press ON Vehicle speed cannot be controlled until the vehicle is traveling at or above 48 km h 80 mph Do not use the speed control in heavy traffic or on roads that are winding slippery or unpaved N Do not shift the gearshift lever into N Neutral with the speed Le control on 43 Controls and features To turn speed control off e Press OFF or e Turn off the vehicle ignition q Once speed control is switched off the previously programmed set speed will be erased To set a speed e Press SET SET ACC SET ACCEL For speed control to operate the speed control must be ON and the vehicle speed must be greater than 48 km h 80 mph If you drive up or down a steep hill your vehicle speed may vary momentarily slower or faster than the set speed This is normal Speed control cannot reduce the vehicle speed if it increases above the set speed on a downhill If your vehicle speed is faster than the set speed while driving on a downhill you may want to shift to the next lower gear or apply the brakes to reduce your vehicle speed If your vehicle slows down more than 16 km h 10 mph below your set speed on an uphill your speed control will disengage This is normal Pressing RES RSM RESUME will re engage it Do not use the speed control in heavy traffic or o
92. l if clear water drips on the ground under the air conditioner drain while the system is working and even after you have stopped the vehicle 38 MAX A C Uses recirculated air to cool the vehicle MAX A C is noisier than A C but more economical and will cool the inside of the vehicle faster Airflow will be from the instrument panel registers This mode can also be used to prevent undesirable odors from entering the vehicle When placed in MAX A C the air conditioning will operate at a full cool temperature Therefore the temperature control becomes non functional A C Uses outside air to cool the vehicle It is quieter than MAX A C but not as economical Airflow will be from the instrument panel registers 7s Panel Distributes outside air through the instrument panel registers However the air will not be cooled below the outside temperature because the air conditioning does not operate in this mode Controls and features OFF Outside air is shut out and the fan will not operate For short periods of time only use this mode to prevent undesirable odors from entering the vehicle lt F Panel and floor Distributes outside air through the instrument panel registers and the floor ducts Heating and air conditioning capabilities are provided in this mode For added customer comfort when the temperature control knob is anywhere in between the full hot and full cold positions the air distributed through the floor ducts will be slight
93. le Symbol Glossary Child Safety Door Lock Unlock Panic Alarm Engine Coolant Do Not Open When Hot Avoid Smoking Flames or Sparks Explosive Gas Power Steering Fluid Emission System Passenger Compartment e Air Filter lt COPOS Interior Luggage Compartment Release Symbol Engine Oil Engine Coolant Temperature Battery Battery Acid Fan Warning Maintain Correct Fluid Level Engine Air Filter Jack Ca 6 p i ir Y be y i Instrumentation Foglamp control Instrument cluster pg 42 pg 8 Headlamp turn signal control pg 41 N aa Power side view mirrors pg 17 Speed control pg 43 Instrument panel dimmer switch pg 16 Driver air bag pg 72 Instrumentation Passenger air bag Windshield wiper pg 72 washer control pg 48 YUU Electronic sound system pg 18 Climate controls ps 36 if equipped Instrumentation WARNING LIGHTS AND CHIMES Base instrument cluster pl t 7 Low fuel Illuminates as an early reminder of a low fuel condition indicated on the LOW fuel gauge refer to Fuel gauge in this chapter for more information FUEL When refueling after the light comes on the amount o
94. lt Minder feature can be deactivated activated by performing the following procedure Before following the procedure make sure that e the parking brake is set e the gearshift is in P Park automatic transmission or the neutral position manual transmission e the ignition switch is in the OFF position all vehicle doors are closed e the driver s safety belt is unbuckled e the parklamps headlamps are in OFF position If vehicle is equipped with Autolamps this will not affect the procedure To reduce the risk of injury do not deactivate activate the Belt Minder feature while driving the vehicle 1 Turn the ignition switch to the RUN or ON position DO NOT START THE ENGINE 2 Wait until the safety belt warning light turns off Approximately 1 2 minutes e Steps 3 5 must be completed within 60 seconds or the procedure will have to be repeated 3 Buckle then unbuckle the safety belt three times ending with the safety belt unbuckled This can be done before or during Belt Minder warning activation 4 Turn on the parklamps headlamps turn off the parklamps headlamps 5 Buckle then unbuckle the safety belt three times ending with the safety belt unbuckled e After step 5 the safety belt warning light will be turned on for three seconds 70 Seating and safety restraints 6 Within seven seconds of the safety belt warning light turning off buckle then unbuckle the safety belt e This will disable Belt
95. luster momentarily illuminates when the ignition is turned to the ON position If the light does not illuminate momentarily at start up remains on or continues to flash the ABS needs to be serviced With the ABS light on the anti lock brake system is disabled and normal P C braking is still effective unless the brake warning light also remains BR AKE illuminated with parking brake released If your brake warning lamp illuminates have your vehicle serviced immediately Using ABS e In an emergency or when maximum efficiency from the ABS is required apply continuous force on the brake The ABS will be activated immediately thus allowing you to retain full steering control of your vehicle and providing there is sufficient space will enable you to avoid obstacles and bring the vehicle to a controlled stop e The Anti Lock system does not decrease the time necessary to apply the brakes or always reduce stopping distance Always leave enough room between your vehicle and the vehicle in front of you to stop e We recommend that you familiarize yourself with this braking technique However avoid taking any unnecessary risks Parking brake P Apply the parking brake whenever the vehicle is parked To set the parking brake pull the handle up as far as possible 90 Driving The BRAKE warning lamp in the instrument cluster illuminates and P remains illuminated when the ignition is turned ON until the BRAKE
96. ly warmer than the air sent to the instrument panel registers Floor Allows for maximum heating by distributing outside air through the floor ducts However the air will not be cooled below the outside temperature because the air conditioning does not operate in this mode Floor and defrost Distributes outside air through the windshield defroster ducts and the floor ducts Heating and air conditioning capabilities are provided in this mode For added customer comfort when the temperature control knob is anywhere in between the full hot and full cold positions the air distributed through the floor ducts will be slightly warmer than the air sent to the windshield defrost ducts If the temperature is about 10 C 50 F or higher the air conditioner will automatically dehumidify the air to reduce fogging CH Defrost Distributes outside air through the windshield defroster ducts It can be used to clear ice or fog from the windshield If the temperature is about 10 C 50 F or higher the air conditioner will automatically dehumidify the air to reduce fogging Operating tips e In humid weather select RY before driving This will reduce fogging on your windshield After a few minutes select any desired position e To reduce humidity buildup inside the vehicle do not drive with the climate control system in the OFF or MAX A C position e Do not put objects under the front seat that will interfere with the airflow to
97. more to relearn the idle and fuel trim strategy e If you do not allow the engine to relearn its idle trim the idle quality of your vehicle may be adversely affected until the idle trim is eventually relearned If the battery has been disconnected or a new battery has been installed the clock and the preset radio stations must be reset once the battery is reconnected 147 Maintenance and care e Always dispose of automotive S batteries in a responsible manner s S Follow your local authorized YY Y standards for disposal Call your t local authorized recycling center to find out more about recycling automotive batteries RECYCLE AIR FILTER MAINTENANCE Refer to the Scheduled Maintenance Guide for the appropriate intervals for changing the air filter element When changing the air filter element use only the Motorcraft air filter element listed Refer to Motorcraft Part Numbers in the Capacities and specifications chapter Do not start your engine with the air cleaner removed and do not remove it while the engine is running CHANGING THE AIR FILTER ELEMENT 1 Release the clamp locking clip on the front portion of the air filter housing MG Sp Van Q amp g AFN 2 Then swing the left side open and Xi A 0 remove the air filter element 7 f i AN 3 When installing the air filter iG tS H element ensure the nubs on the air 14 5 6 filter element and the air filter H oe j oa q g hous
98. mperature gauge indicator will be near the center of the normal area between H and C 2 While the engine idles turn the steering wheel left and right several times 3 Turn the engine off 4 Check the fluid level in the reservoir It should be between the MIN and MAX lines Do not add fluid if the level is in this range 142 Maintenance and care 5 If the fluid is low add fluid in small amounts continuously checking the level until it reaches the range between the MIN and MAX lines Be sure to put the cap back on the reservoir TRANSMISSION FLUID Checking automatic transmission fluid Refer to your Scheduled Maintenance Guide for scheduled intervals for fluid checks and changes Your transaxle does not consume fluid However the fluid level should be checked if the transaxle is not working properly i e if the transaxle slips or shifts slowly or if you notice some sign of fluid leakage Automatic transmission fluid expands when warmed To obtain an accurate fluid check drive the vehicle until it is warmed up approximately 30 km 20 miles If your vehicle has been operated for an extended period at high speeds in city traffic during hot weather or pulling a trailer the vehicle should be turned off for about 30 minutes to allow fluid to cool before checking 1 Drive the vehicle 30 km 20 miles or until it reaches normal operating temperature 2 Park the vehicle on a level surface and engage the parking brake
99. n 64 65 66 for children 0 0 0 76 77 lap elt sx sic hescedssgecessslvtecsGianeioe 66 warning light and CHIME sisurssssiss 10 12 67 68 Safety seats for children 78 Seat belts see Safety restraints 63 IDOALS EE E wate E at eres 60 child safety seats cce 78 Cleaning y scipenccaeitaheteacess 173 174 Servicing your vehicle 125 Spark plugs specifications 175 177 178 Specification chart WODTICANUS arniran ninis 176 177 Speed control ceeeeeeeeeeee 43 Speedometer cceceeesseeeeeee 14 Starting your vehicle 84 87 Jump starting oer 119 Steering wheel GINE cece tient asi a 47 Tachometer sesiis 15 Temperature control see Climate control 36 THUS seraicgnar 115 149 150 151 Changing ssnsdin 115 116 checking the pressure 151 TEPIACING ssnin oss 152 TOANE eipig esa E 151 snow tires and chains 152 UIE BLAMES s 2ieicis aaricpacdedecesscens 150 tred WET cccecesscesessseeeesenees 150 TOWING cacianerissuronersaiss 151 WYECKEY o ccccccccssssccessesesesenanes 124 Transaxle automatic operation 92 fluid refill capacities 175 lubricant specifications 177 manual operation cceee 97 Transmission fluid checking and adding automatic V cen ccesdi rcesdenobeedehaeite 143 Index fluid checking and adding mantal seriden 145 lubricant specificatio
100. n extended period of time contaminants may enter the lamp housings and affect performance Replacing headlamp bulbs 1 Make sure that the headlamps are turned OFF 2 Open the hood and disconnect the headlamp wiring socket from the in line connector This will make it easier to change the bulb 3 Remove the protective dust shield from the housing by turning the dust shield counterclockwise when viewed from the rear 4 Disconnect the electrical connector from the bulb by pulling rearward 163 Maintenance and care 5 Remove the bulb retaining ring by rotating it counterclockwise Q bulb from the lamp assembly by pulling it straight back out of the 6 Without turning remove the old k lamp assembly and replace im Handle a halogen headlamp bulb carefully and keep out of children s reach Grasp the bulb only by its plastic base and do not touch the glass The oil from your hand could cause the bulb to break the next time the headlamps are operated 7 Install the new bulb in lamp assembly by pushing straight in with the bulb s plastic base facing upward Turn the bulb slightly to align the grooves in the plastic base with the tabs in the lamp assembly 8 Install the bulb retaining ring over the plastic base and lock the ring by rotating it clockwise until it snaps into place 9 Connect the electrical connector into the plastic base until it snaps 10 Install the protective dust shield and
101. n on brake fluid maintenance refer to Brake fluid in this chapter Brake fluid is toxic If brake fluid contacts the eyes flush eyes with running water for 15 minutes Seek medical if irritation persists If taken internally drink water and induce vomiting Seek medical attention immediately WINDSHIELD WASHER FLUID lt gt Checking and adding washer fluid e Coupe 136 Maintenance and care eSedan Check the washer fluid whenever you stop for fuel The reservoir is highlighted with a symbol If the level is low add enough fluid to fill the reservoir In very cold weather do not fill the reservoir all the way Only use a washer fluid that meets Ford specifications Refer to Lubricant specifications in the Capacities and specifications chapter State or local regulations on volatile organic compounds may restrict the use of methanol a common windshield washer antifreeze additive Washer fluids containing non methanol antifreeze agents should be used only if they provide cold weather protection without damaging the vehicle s paint finish wiper blades or washer system Do not put washer fluid in the engine coolant reservoir Washer fluid placed in the cooling system may harm engine and cooling system components ENGINE COOLANT E Checking engine coolant Your engine s cooling system has been factory filled with a 50 50 mixture of distilled wa
102. n roads that are winding slippery or unpaved 44 Controls and features To set a higher set speed Press and hold SET SET ACC SET ACCEL Release the control when the desired vehicle speed is reached or Press and release SET SET ACC SET ACCEL Each press will increase the set speed by 1 6 km h 1 mph or Accelerate with your accelerator pedal When the desired vehicle speed is reached press and release SET SET ACC SET ACCEL You can accelerate with the accelerator pedal at any time during speed control usage Releasing the accelerator pedal will return your vehicle to the previously programmed set speed To set a lower set speed Press and hold CST COAST Release the control when the desired speed is reached or Press and release CST COAST Each press will decrease the set speed by 1 6 km h 1 mph or Depress the brake pedal When the desired vehicle speed is reached press SET SET ACC SET ACCEL 45 Controls and features To disengage speed control e Depress the brake pedal or e Depress the clutch pedal if equipped Disengaging the speed control will not erase the previously programmed set speed Pressing OFF will erase the previously programmed set speed 46 Controls and features To return to a previously set speed e Press RES RSM RESUME For RES RSM RESUME to operate the vehicle speed must be faster than 48 km h 80 mph TILT STEERING IF EQUIPPED Pull the
103. nce received including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Replacing the battery The remote transmitter is powered by one coin type three volt lithium battery CR2032 or equivalent Typical operating range will allow you to be up to 10 meters 83 feet away from your vehicle A decrease in operating range can be caused by e weather conditions e nearby radio towers e structures around the vehicle other vehicles parked next to the vehicle 55 Controls and features To replace the battery 1 Twist a thin coin between the two halves of the transmitter near the key ring DO NOT TAKE THE FRONT PART OF THE TRANSMITTER APART 2 Place the positive side of new battery in the same orientation Refer to the diagram inside the transmitter unit 3 Snap the two halves back together Replacement of the battery will not cause the remote transmitter to become deprogrammed from your vehicle The remote transmitter should operate normally after battery replacement Replacing lost transmitters If a remote transmitter has been lost and you would like to remove it from the vehicle s memory or you would like to purchase additional remote transmitters and have them programmed to your vehicle e Take all your vehicle s transmitters to your dealer for programm
104. nd Ford of Canada in Canada It provides the following e benefits during the warranty period depending on the plan you purchase such as reimbursement for rentals coverage for certain maintenance and wear items e protection against repair costs after your Bumper to Bumper Warranty expires You may purchase Ford ESP from any participating Ford and Lincoln Mercury and Ford of Canada dealer There are several plans available in various time distance and deductible combinations which can be tailored to fit your own driving needs Ford ESP also offers reimbursement benefits for towing and rental coverage In Hawaii rules vary See your dealer for details When you buy Ford ESP you receive Peace of Mind protection throughout the United States and Canada provided by a network of more than 5 000 participating Ford or Lincoln Mercury and Ford of Canada dealers If you did not take advantage of the Ford Extended Service Plan at the time of purchasing your vehicle you may still be eligible Please contact your dealer for further information Since this information is subject to change please ask your dealer for complete details about Ford Extended Service Plan coverage options Getting the service you need At home Ford Motor Company and Ford of Canada have authorized dealerships to service your vehicle When you need warranty repairs your selling dealer would like you to return to it for that service but you may also take your ve
105. nd could result in engine damage transaxle damage structural damage loss of control and personal injury Preparing to tow Use the proper equipment for towing a trailer and make sure it is properly attached to your vehicle See your dealer or a reliable trailer dealer if you require assistance Hitches Do not use hitches that clamp onto the vehicle bumper Use a load carrying hitch You must distribute the load in your trailer so that 10 of the total weight of the trailer is on the tongue Safety chains Always connect the trailer s safety chains to the frame or hook retainers of the vehicle To connect the trailer s safety chains cross the chains under the trailer tongue and allow slack for turning corners If you use a rental trailer follow the instructions that the rental agency gives to you Do not attach safety chains to the bumper Trailer brakes Electric brakes and manual automatic or surge type trailer brakes are safe if installed properly and adjusted to the manufacturer s specifications The trailer brakes must meet local and Federal regulations 102 Driving Do not connect a trailer s hydraulic brake system directly to your vehicle s brake system Your vehicle may not have enough braking power and your chances of having a collision greatly increase The braking system of the tow vehicle is rated for operation at the GVWR not GCWR Trailer lamps Trailer lamps are required on most towed vehicles
106. never you leave your vehicle If the parking brake is fully released but the brake warning lamp remains illuminated the brakes may not be working properly See your dealer or a qualified service technician 93 Driving Understanding gearshift positions Hold the brake pedal down while you move the gearshift lever from P Park to another position If you do not hold the brake pedal down your vehicle may move unexpectedly and injure someone P Park Always come to a complete stop before shifting into P Park Make sure that the gearshift lever is securely latched in P Park This locks the transaxle and prevents the front wheels from rotating Always set the parking brake fully and make sure the gearshift lever is latched in P Park Turn off the ignition whenever you leave your vehicle R Reverse With the gearshift lever in R Reverse the vehicle will move backward You should always come to a complete stop before shifting in and out of R Reverse 94 N Neutral With the gearshift lever in the N Neutral position the vehicle can be started and is free to roll Hold the brake pedal down while in this position D Overdrive The overdrive position is the normal driving position for an automatic overdrive transaxle It works the same way as D Drive but shifts to a fourth gear an overdrive gear when your vehicle cruises at a constant speed for any length of time This fourth gear will incre
107. ng conditions Use only carnauba or synthetic based waxes Use a cleaning fluid with a clean cloth to remove any bugs before waxing your vehicle Use tar remover to remove any tar spots Avoid getting wax on the windshield or on any surfaces which appear coarse or bumpy If you have wax applied at a commercial car wash it is recommended that you clean the wiper blades and windshield as described in Cleaning the wiper blades and windshield Repairing paint chips Minor scratches or paint damage from road debris may be repaired with the Ultra Touch Prep and Finishing Kit F7AZ 19K507 BA Lacquer Touch up Paint HALBZ 19500 XXXXA or Exterior Acrylic Spray Lacquer HALAZ 19500 XXXXA from the Ford Car Care Chemicals line Please note that the part numbers shown as XXXX above will vary with your vehicle s specific coloring Observe the application instructions on the products Remove particles such as bird droppings tree sap insect remains tar spots road salt and industrial fallout immediately Cleaning the wheels Wash with the same detergent as the body of your vehicle Do not use acid based or alcohol based wheel cleaners steel wool fuel or strong detergents Never use abrasives that will damage the finish of special wheel surfaces Use a tar remover to remove grease and tar The brushes used in some automatic car washes may damage the finish on your wheels Before going to a car wash find out if the brushes are abrasive
108. ng the filler cap clockwise until three clicks can be heard To avoid possible oil loss DO NOT operate the vehicle with the engine oil level indicator and or the engine oil filler cap removed Engine oil and filter recommendations Look for this certification trademark Motorcraft SAE 5W 30 MOTOR OIL QUART 0 946L ooo Use SAE 5W 30 motor oil certified for gasoline engines by the American Petroleum Institute API Motor oil displaying the API certification trademark will meet all requirements for your vehicle s engine Ford oil specification is WSS M2C153 G Do not use supplemental engine oil additives oil treatments or engine treatments They are unnecessary and could under certain conditions lead to engine damage which is not covered by your warranty Change your engine oil and filter according to the appropriate schedule listed in the Scheduled Maintenance Guide Ford production and aftermarket Motorcraft oil filters are designed for added engine protection and long life If a replacement oil filter is used that does not meet Ford material and design specifications start up engine noises or knock may be experienced It is recommended you use the appropriate Motorcraft oil filter or another brand meeting Ford specifications for your engine application 134 Maintenance and care BRAKE FLUID C Checking and adding brake fluid Brake fluid should be checked and bl L refilled as needed Refer t
109. ng the lamp lens up on the assembly Map lamps For bulb replacement see a qualified service technician or your dealer 167 Maintenance and care Using the right bulbs Replacement bulbs are specified in the chart below Headlamp bulbs must be marked with an authorized D O T for North America and an E for Europe to assure lamp performance light brightness and pattern and safe visibility The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time All replacement bulbs are clear in color except where noted To replace all instrument panel lights see your dealer AIMING THE HEADLAMPS Your vehicle is equipped with a Vehicle Headlamp Aim Device VHAD on each headlamp Each headlamp may be properly aimed in the vertical up down and the horizontal left right directions using your VHAD system The headlamps on your vehicle are properly aimed at the assembly plant A bubble vertical indicator that is not centered between the two red lines does not necessarily indicate out of aim headlamps If your vehicle is not positioned on a level surface the slope will be included in the vertical indication Therefore vertical and horizontal headlamp adjustment should be performed only when the beam direction appears to be incorrect You will need one 4 mm wrench or socket to make the adjustments If the vehicle has been in an accident the vehicle s
110. ng to automotive fuels c ee 153 FUSES nonm ainas 108 110 Gas cap see Fuel cap 155 Index Gas mileage see Fuel economy nsss 158 AUB ES 55 55 stecccsecaceseesenacenvantiaee 12 13 engine coolant temperature galge sissssirisissis 13 fuel PAUSE ssenicorcorniipani 13 OdOmMeter seicensshesycteerreteceeeticeennss 14 speedometer ccccccccceesseeeees 14 tachometer soerenprnereniasi 15 trip odometet cccecceeeeseees 14 GAWR Gross Axle Weight Rating 100 definition oo eee eee eeeeeeeeeteeees 100 driving with a heavy load 100 IOCAUION sinsir 100 GVWR Gross Vehicle Weight Rating 100 calculating scesesscigisssanresearncceers 100 CGEMMICION seeiis en 100 driving with a heavy load 100 lOCALIOT sirenos 100 Hazard flashers cceeeeee 106 Head restraints saescriririncisis 60 Headlamps ccccccccesceeeeeseeeeeeees Al AMINE deraigada ie 168 169 bulb specifications 00 168 daytime running lights 41 flash tO PASS enscssiseniiriiariess 42 high EAM seessscssnsessecsmevsy 11 42 replacing bulbs 0 0 163 turning on and off 0 41 warning Chime syssercscepese 12 Heating moaienn 36 heater only system cccee 36 heating and air conditioning system 37 OO eaae cae RE 129 MEE ONAL g AOE 177 178 positions of the ignition 41 Infant seats see Safety seats 78 Inspection maintenance VM
111. njected engine avoid pressing the accelerator before or during starting Only use the accelerator when you have difficulty starting the engine For more information on starting the vehicle refer to Starting the engine in this chapter Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system creating the risk of fire or other damage Do not park idle or drive your vehicle in dry grass or other dry ground cover The emission system heats up the engine compartment and exhaust system which can start a fire Do not start your vehicle in a closed garage or in other enclosed areas Exhaust fumes can be toxic Always open the garage door before you start the engine See Guarding against exhaust fumes in this chapter for more instructions If you smell exhaust fumes inside your vehicle have your dealer inspect your vehicle immediately Do not drive if you smell exhaust fumes Important safety precautions A computer system controls the engine s idle revolutions per minute RPM When the engine starts the idle RPM runs faster to warm the engine If the engine idle speed does not slow down automatically have the vehicle checked Do not allow the vehicle to idle for more than 10 minutes at the higher RPM Before starting the vehicle 1 Make sure all vehicle occupants have buckled their safety belts For more information on safety belts and their proper usage refer to the Seating and s
112. ns 176 Trip Odometer cccccescceeeees 14 MUIR seess Ereet 52 remote release s s s 17 55 Turn signal 4 scr csvcazeupcdeosearaceyon 11 43 Vehicle dimensions 0066 178 Vehicle Identification Number GA DEN eevee E A T 181 Vehicle loading serisini 100 Ventilating your vehicle 88 Warning Chimes seeeeees 12 198 Warning lights see Lights 8 Washer fluid ou cececeeeeees 136 Water Driving through 104 Windows POWT sisssehsccadiaiersetoenctuerseusnedss 51 Windshield washer fluid and wipers checking and adding fluid 136 checking and cleaning 149 OP CLALMOM erinrar aneen 48 replacing wiper blades 149 Wrecker towing sessen 124 199 Filling station information Item Required fuel Unleaded fuel only 87 octane Fuel tank capacity 48 5L 12 8 gallons Tire size and pressure Refer to the Certification Label Hood release Pull handle under the left side of Oil capacity includes filter change Engine oil Use Motorcraft SAE 5W 30 Super Premium Motor Oil Ford specification WSS M2C153 G Coolant capacity t Automatic transaxle 6 0L 6 3 quarts Power steering fluid capacity Automatic transaxle capacity Manual transaxle capacity 1 Use Ford Premium Engine Coolant green in color DO NOT USE Ford Extended Life Engine Coolant orange in color Refer to Adding engine coolant in the Maintenance and Care chapter 200
113. ntation ZX2 coupe instrument cluster gauges pe X yeo SERVICE Wane TH SOON Fuel gauge Displays approximately how much fuel is in the fuel tank when the key is in the ON position The fuel gauge may vary slightly when the vehicle is in motion The ignition should be in the OFF position while the vehicle is being refueled When the gauge first indicates empty there is a small amount of reserve fuel in the tank When refueling the vehicle from an empty indication the amount of fuel that can be added will be less than the advertised capacity due to the reserve fuel Engine coolant temperature gauge Indicates the temperature of the engine coolant At normal operating temperature the needle remains within the normal area the area between the H and C If it enters the red section the engine is N S overheating Stop the vehicle as C soon as safely possible switch off the engine immediately and let the engine cool Refer to Engine coolant in the Maintenance and care chapter 13 Instrumentation AN Never remove the coolant reservoir cap while the engine is JN D running or hot This gauge indicates the temperature of the engine coolant not the coolant level If the coolant is not at its proper level the gauge indication will not be accurate Speedomeier Indicates the current vehicle speed Odometer Registers the total kilometers miles of the vehicle
114. nternal circuits and the supplemental air bag electrical system warning including the impact sensors the system wiring the air bag system readiness light the air bag back up power and the air bag ignitors Determining if the system is operational Af The SRS uses a readiness light in the instrument cluster or a tone to indicate the condition of the system Refer to the Air bag readiness section in the Instrumentation chapter Routine maintenance of the air bag is not required A difficulty with the system is indicated by one or more of the following e The readiness light will either e flash or stay lit Q8 e The readiness light will not IN illuminate immediately after ignition is turned on A series of five beeps will be heard The tone pattern will repeat periodically until the problem and light are repaired If any of these things happen even intermittently have the SRS serviced at your dealership or by a qualified technician immediately Unless serviced the system may not function properly in the event of a collision Disposal of air bags and air bag equipped vehicles including pretensioners For disposal of air bags or air bag equipped vehicles see your local dealership or qualified technician Air bags MUST BE disposed of by qualified personnel SAFETY RESTRAINTS FOR CHILDREN See the following sections for directions on how to properly use safety restraints for children Also see Air Bag Supplemental Restraint
115. nti theft system if equipped Refer to Anti theft system in the Controls and features chapter THEFT Charging system Illuminates when the ignition is turned to the ON position and the engine is off The light also illuminates when the battery is not charging properly requiring electrical system service 11 Instrumentation Engine oil pressure Momentarily illuminates when the ignition is turned to the ON position and the engine is off Iuminates when the oil pressure falls below the normal range Stop the vehicle as soon as safely possible and switch off the engine immediately Check the oil level and add oil if needed Refer to Engine oil in the Maintenance and care chapter Safety belt warning chime A Sounds to remind you to fasten your safety belts For information on the safety belt warning chime refer to the Seating and safety restraints chapter Supplemental restraint system SRS warning chime 4f For information on the SRS warning chime refer to the Seating and safety restraints chapter Key in ignition warning chime Sounds when the key is left in the ignition in the OFF LOCK or ACC position and the driver s door is opened Headlamps on warning chime Sounds when the headlamps or parking lamps are on the ignition is off and the key is not in the ignition and the driver s door is opened GAUGES Base instrument cluster gauges SERVICE a 3D ENGINE Fue SOON a 3D 12 Instrume
116. o the Scheduled Maintenance Guide for the service interval schedules 1 Clean the reservoir cap before removal to prevent dirt or water from entering the reservoir 2 Visually inspect the fluid level amam 3 If necessary add brake fluid from O a clean un opened container until ULZ the level reaches MAX Do not fill above this line 4 Use only a DOT 3 brake fluid certified to meet Ford specifications Refer to Lubricant specifications in the Capacities and specifications chapter Brake fluid is toxic If brake fluid contacts the eyes flush eyes with running water for 15 minutes Seek medical attention if irritation persists If taken internally drink water and induce vomiting Seek medical attention immediately If you use a brake fluid that is not DOT 3 you will cause permanent damage to your brakes Do not let the fluid level in the reservoir for the master cylinder fall below the MIN mark If master cylinder runs dry this may cause the brakes to fail 135 Maintenance and care CLUTCH FLUID IF EQUIPPED Check the clutch fluid level Refer bl L to the Scheduled Maintenance Guide SS N for the service interval schedules The clutch master cylinder and brake master cylinder are part of the same system both are refillable through the brake master cylinder with brake fluid During normal operation the fluid level in the brake fluid reservoir should remain constant For more informatio
117. of a tape Eject function Press the control to stop and eject a tape Dolby noise reduction Dolby noise reduction operates only in tape mode Dolby noise reduction reduces the amount of hiss and static during tape playback Press the DO control to activate and deactivate Dolby noise reduction Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Controls and features Corporation Dolby and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation 23 Controls and features Setting the clock To set the hour press the hour h control and press 12 e to increase hour and E gt e to decrease hour To set the minute press the minute m control and press i i e to increase minutes and e to decrease minutes Pr Cs Premium AM FM Siereo Cassette Premium Sound Radio Controlled CD Changer Compatible CED Gage GRs GRs gt Ont 24 Controls and features Volume power conirol Press the control to turn the audio VOL system on or off PUSH ON K wg N N Turn control to raise or lower T VOL volume 7 PUSH ON 4 If the volume is set above a certain level and the ignition is turned off the volume will come back on at a nominal listening level when the ignition switch is turned back on If you wish to maintain your p
118. of fuel in a full tank and a tank when the fuel gauge indicates empty Empty reserve is the small amount of usable fuel remaining in the fuel tank after the fuel gauge indicates empty The amount of empty reserve varies and should not be relied upon to increase driving range When refueling your vehicle after the fuel gauge indicates empty you might not be able to refuel the full amount of the advertised capacity of the fuel tank due to the empty reserve still present in the tank For consistent results when filling the fuel tank e Use the same filling rate setting dow medium high each time the tank is filled e Allow three automatic click offs when filling e Always use fuel with the recommended octane rating 158 Maintenance and care e Use a known quality gasoline preferably a national brand e Use the same side of the same pump and have the vehicle facing the same direction each time you fill up e Have the vehicle loading and distribution the same every time Your results will be most accurate if your filling method is consistent Calculating fuel economy 1 Fill the fuel tank completely and record the initial odometer reading in kilometers or miles 2 Each time you fill the tank record the amount of fuel added in liters or gallons 3 After at least three to five tank fill ups fill the fuel tank and record the current odometer reading 4 Subtract your initial odometer reading from the current odom
119. on Location Rating FUEL INJ Air Bags Engine Controls Generator DEFOG Rear Window Defrost MAIN 100A Charging System BTN Cooling Fan Fuel Pump OBD II ABS Fuses Ignition Switch Headlamps ABS Main Relay COOLING 40A Constant Control Relay Module FAN OBD II 10A Data Link Connector DLC Instrument Cluster FUEL 20A Engine Controls PUMP HEAD RH Headlamps AD LH Headlamps Fuse Link Cartridge Fuse Relays Relays are located in the power distribution box and should be replaced by qualified technicians CHANGING THE TIRES If you get a flat tire while driving do not apply the brake heavily Instead gradually decrease your speed Hold the steering wheel firmly and slowly move to a safe place on the side of the road Temporary spare tire information The temporary spare tire for your vehicle is labeled as such It is smaller than a regular tire and is designed for emergency use only If you use the temporary spare tire continuously or do not follow these precautions the tire could fail causing you to lose control of the vehicle possibly injuring yourself or others 115 Roadside emergencies When driving with the temporary spare tire do not e exceed 80 km h 50 mph under any circumstances e load the vehicle beyond maximum vehicle load rating listed on the Safety Compliance Label e tow a trailer e use tire chains e drive through an automatic car wash because of the vehicle s reduced ground cl
120. on of the tail lamp assembly one just below the other Follow the same steps to replace either bulb 1 Open trunk to expose the tail lamp assembly Remove the two screws from the front of the lamp 2 The tail lamp has hidden fasteners which can be disengaged by hitting the lamp with the side of your hand toward the side of the vehicle 3 Pull lamp assembly away from vehicle for access to bulbs 4 Remove the bulb socket by rotating it counterclockwise then pulling it out of the lamp assembly 5 Pull the bulb from the socket and push in the new bulb 6 Install the bulb socket into the lamp by rotating it clockwise 7 Position the tail lamp on the vehicle and gently tap the lens to engage the clips Install the screws 166 Maintenance and care License plate lamps To change the license plate bulbs 1 Remove two screws and the license plate lamp assembly from the rear bumper 2 Carefully pull the bulb out from the lamp assembly and push in the new bulb 3 Install the lamp assembly on rear bumper with two screws Replacing backup lamp bulbs For bulb replacement see a dealer or qualified technician INTERIOR BULBS Dome lamp 1 Remove the lamp lens by applying pressure to both tabs at the top of the lamp and pulling lens downward 2 Pull out the burned out bulb and install a new one 3 Install the lamp lens by applying pressure to both sides of the lamp lens and poppi
121. on the end walls could cause acid to flow through the vent caps resulting in personal injury and or damage to the vehicle or battery Lift the battery with a battery carrier or with your hands on opposite corners Keep batteries out of reach of children Batteries contain sulfuric acid Avoid contact with skin eyes or clothing Shield your eyes when working near the battery to protect against possible splashing of acid solution In case of acid contact with skin or eyes flush immediately with water for a minimum of 15 minutes and get prompt medical attention If acid is swallowed call a physician immediately Because your vehicle s engine is electronically controlled by a computer some control conditions are maintained by power from the battery When the battery is disconnected or a new battery is installed the engine must relearn its idle and fuel trim strategy for optimum driveability and performance To begin this process 1 With the vehicle at a complete stop set the parking brake 2 Put the gearshift in P Park automatic transaxle or the neutral position manual transaxle turn off all accessories and start the engine 3 Run the engine until it reaches normal operating temperature 4 Allow the engine to idle for at least one minute 5 Turn the A C on and allow the engine to idle for at least one minute 6 Drive the vehicle to complete the relearning process e The vehicle may need to be driven 16 km 10 miles or
122. only and allows key removal On vehicles with a manual transaxle push the key in while turning to lock 2 ACCESSORY allows the electrical accessories such as the radio to operate while the engine is not running 3 ON all electrical circuits operational Warning lights illuminated Key position when driving 4 START cranks the engine Release the key as soon as the engine starts HEADLAMP CONTROL Rotate the headlamp control to the Z N first position to turn on the parking lamps Rotate to the second position l to also turn on the headlamps Daytime running lamps DRL if equipped Turns the headlamps on with a reduced output To activate e the ignition must be in the ON position and e the headlamp control is in the OFF or Parking lamps position Always remember to turn on your headlamps at dusk or during inclement weather The Daytime Running Light DRL System does not activate your tail lamps and generally may not provide adequate lighting during these conditions Failure to activate your headlamps under these conditions may result in a collision 41 Controls and features High beams Push forward to activate Pull toward you to deactivate Flash to pass Pull toward you to activate and release to deactivate Foglamp control if equipped 0 Rotate forward to activate y 42 Controls and features TURN SIGNAL CONTROL gt gt e Push down to activate the left A turn signa
123. otive fluids are not interchangeable do not use engine coolant antifreeze or windshield washer fluid outside of its specified function and vehicle location Adding engine coolant Use only Ford Premium Engine Coolant E2FZ 19549 AA in Canada Motorcraft CXC 10 or a premium engine coolant that meets Ford specification ESE M97B44 A e DO NOT USE Ford Extended Life Engine Coolant F6AZ 19544 AA orange in color e DO NOT USE a DEX COOL engine coolant or an equivalent engine coolant that meets Ford specification WSS M97B44 D e DO NOT USE alcohol or methanol antifreeze or any engine coolants mixed with alcohol or methanol antifreeze e DO NOT USE supplemental coolant additives in your vehicle These additives may harm your engine s cooling system e DO NOT MIX recycled coolant and conventional coolant together in your vehicle Mixing of engine coolants may harm your engine s cooling system e The use of an improper coolant may harm engine and cooling system components and may void the warranty of your vehicle s engine cooling system If you are unsure which type of coolant your vehicle requires contact your local dealer Do not put engine coolant in the windshield washer fluid reservoir If engine coolant is sprayed onto the windshield it could make it difficult to see through the windshield When the engine is cool add a 50 50 mixture of engine coolant and distilled water to the engine coolant reservoir until the coolan
124. ounds e g baking soda that result from the combustion process that inflates the air bag Small amounts of sodium hydroxide may be present which may irritate the skin and eyes but none of the residue is toxic While the system is designed to help reduce serious injuries contact with a deploying air bag may also cause abrasions swelling or temporary hearing loss Because air bags must inflate rapidly and with considerable force there is the risk of death or serious injuries such as fractures facial and eye injuries or internal injuries particularly to occupants who are not properly restrained or are otherwise out of position at the time of air bag deployment Thus it is extremely important that occupants be properly restrained as far away from the air bag module as possible while maintaining vehicle control Several air bag system components get hot after inflation Do not touch them after inflation If the air bag is deployed the air bag will not function again and must be replaced immediately If the air bag is not replaced the unrepaired area will increase the risk of injury in a collision The SRS consists of e driver and passenger air bag modules which include the inflators and air bags e one or more impact and safing sensors e a readiness light and tone e diagnostic module e and the electrical wiring which connects the components 75 Seating and safety restraints The diagnostic module monitors its own i
125. pants by 45 in cars and by 60 in light trucks Traffic is light Nearly 1 of 2 deaths occur in single vehicle crashes many when no other vehicles are around Belts wrinkle my Possibly but a serious crash can do much more clothes than wrinkle your clothes particularly if you are unbelted The people I m Set the example teen deaths occur 4 times more with don t wear often in vehicles with TWO or MORE people belts Children and younger brothers sisters imitate behavior they see I have an air bag Air bags offer greater protection when used with safety belts Frontal airbags are not designed to inflate in rear and side crashes or rollovers Td rather be Not a good idea people who are ejected are 40 thrown clear times more likely to DIE Safety belts help prevent ejection WE CAN T PICK OUR CRASH Do not sit on top of a buckled safety belt to avoid the Belt Minder chime Sitting on the safety belt will increase risk of injury in an accident To disable one time or deactivate the Belt Minder feature please follow the directions stated below 69 Seating and safety restraints One time disable Anytime the safety belt is buckled and then unbuckled during an ignition ON cycle Belt Minder will be disabled for that ignition cycle only Deactivating activating the belt minder feature Read steps 1 9 thoroughly before proceeding with the deactivation activation programming procedure The Be
126. pped in traffic for long periods of time in hot weather place the gearshift in P Park and increase idle speed This aids engine cooling and air conditioner efficiency e Vehicles with trailers should not be parked on a grade If you must park on a grade place wheel chocks under the trailer s wheels DRIVING THROUGH WATER Do not drive quickly through standing water especially if the depth is unknown Traction or brake capability may be limited and if the ignition system gets wet your engine may stall Water may also enter your engine s air intake and severely damage your engine If driving through deep or standing water is unavoidable proceed very slowly Never drive through water that is higher than the bottom of the hubs for trucks or the bottom of the wheel rims for cars Once through the water always try the brakes Wet brakes do not stop the vehicle as effectively as dry brakes Drying can be improved by moving your vehicle slowly while applying light pressure on the brake pedal Driving through deep water where the transmission vent tube is submerged may allow water into the transmission and cause internal transmission damage LUGGAGE RACK IF EQUIPPED Load the luggage as far back as safely possible on the rack without exceeding the gross vehicle weight rating GVWR or the gross axle weight rating GAWR Use adjustable tie down loops to secure the load 104 Roadside emergencies GETTING ROADSIDE ASSISTAN
127. r Spray Glass Cleaner E4AZ 19C507 AA available from your Ford Dealer Do not use abrasive cleansers on glass as they may cause scratches The windshield or rear window is clean if beads do not form when you rinse it with water The windshield rear window and wiper blades should be cleaned on a regular basis and blades or rubber elements replaced when worn Cleaning the engine Engines are more efficient when they are clean because grease and dirt buildup keep the engine warmer than normal When washing e Take care when using a power washer to clean the engine The high pressure fluid could penetrate the sealed parts and cause damage e Do not spray with cold water to avoid cracking the engine block or other engine components 172 Maintenance and care e Never apply anything to the drive belt including belt dressing e Cover the highlighted areas to prevent water damage when cleaning the engine e Never wash or rinse the engine while it is running water in the running engine may cause internal damage Cleaning the instrument panel Clean with a damp cloth then dry with a dry cloth Avoid cleaner or polish that increases the gloss of the upper portion of the instrument panel The dull finish in this area helps protect the driver from undesirable windshield reflection Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamin
128. rator directly at 1 800 207 0685 GETTING ASSISTANCE OUTSIDE THE U S AND CANADA Before exporting your vehicle to a foreign country contact the appropriate foreign embassy or consulate These officials can inform you of local vehicle registration regulations and where to find unleaded fuel If you cannot find unleaded fuel or can only get fuel with an anti knock index lower than is recommended for your vehicle contact a district or owner relations customer assistance office 188 Customer assistance The use of leaded fuel in your vehicle without proper conversion may damage the effectiveness of your emission control system and may cause engine knocking or serious engine damage Ford Motor Company Ford of Canada is not responsible for any damage caused by use of improper fuel In the United States using leaded fuel may also result in difficulty importing your vehicle back into the U S If your vehicle must be serviced while you are traveling or living in Central or South America the Caribbean or the Middle East contact the nearest Ford dealership If the dealership cannot help you write or call FORD MOTOR COMPANY WORLDWIDE DIRECT MARKET OPERATIONS 1555 Fairlane Drive Fairlane Business Park 3 Allen Park Michigan 48101 U S A Telephone 313 594 4857 FAX 313 390 0804 If you are in another foreign country contact the nearest Ford dealership If the dealership employees cannot help you they can direct you to th
129. reset volume level turn the audio system off with the power control before switching off the ignition AM FM select The AM FM select control works in radio tape and CD modes if gt equipped AM FM select in radio mode This control allows you to select AM or FM frequency bands Press the control to switch between AM FM1 or FM2 memory preset stations AM FM select in tape mode Press this control to stop tape play and begin radio play 25 Controls and features AM FM select in CD mode Press this control to stop CD play and begin radio play You can switch from CD play to tape play by simply inserting a tape into the cassette deck Tune adjust The tune control works in radio or CD mode if equipped Tune adjust in radio mode e Press the A to move to the next frequency down the band lt whether or not a listenable station is located there Hold the control to move through the frequencies quickly Z e Press the right side of the control xX A to move to the next frequency up n e eS the band whether or not a listenable station is located there Hold for quick movement SEEK TRACK Tune adjust for CD mode if equipped e Press the lt Q to select the previous disc in the CD changer Play will begin on the first track of the disc unless the CD changer is in shuffle mode Refer to Shuffle feature for more information Hold the control to continue reversing through the disc
130. rts transaxles 5 3 quarts Engine oil Motorcraft SAE includes filter 5W 30 Super 4 5 quarts change oo Motor Sedan 3 8L a ce Fuel tank 48 5L capacity 12 8 gallons 175 Capacities and specifications Power steering Motorcraft All Fill to line on maa yipecone are resena e Transmission Automatic 3 9L MERCON ATF Manual 3 35L transaxles 3 55 quarts Windshield Ultra Clear All 2 2L washer fluid Windshield 2 32 quarts Washer Concentrate 1 Use Ford Premium Engine Coolant green in color DO NOT USE Ford Extended Life Engine Coolant orange in color Refer to Adding engine coolant in the Maintenance and Care chapter LUBRICANT SPECIFICATIONS Ford Part Item Name or Equivalent Brake fluid High C6AZ 19542 AB ESA M6C25 A Performance and DOT 3 DOT 3 Motor Vehicle Brake Fluid Door latch hood Multi Purpose DOAZ 19584 AA ESB M1C93 B or Ford Part Ford Number Specification latch auxiliary Grease or ESR M1C159 A hood latch F5AZ 19G209 AA trunk latch seat tracks Lock Lubricant Automatic Motorcraft XT 2 QDX MERCON transaxle MERCON ATF 176 Capacities and specifications Ford Part Name or Equivalent Ford Part Number Ford Specification Manual transaxle Motorcraft XT 2 QDX MERCON MERCON ATF Engine oil Motorcraft SAE XO 5W30 QSP 5W 30 Super Premium Motor Oil WSS M2C153 G and API Certification Mark Constant CV Joint Grease H43Z 19590 A E
131. rvice engine soon light 9 cleaning s d cacseaxceysiscctneseasacnsceets 172 COOLANT cc ss csciedsadecnecse geecssssneanes 137 idle speed control 146 lubrication specifications c 176 177 refill capacities 0 0 00 175 service points wee 130 131 starting after a collision 106 Engine block heater 4 87 ENING OIl g cessicaessceeateresystesanceeues 132 checking and adding 132 GIPSLICK scsssssvevssssccssatsetsessarcsceets 132 filter specifications 134 175 recommendations 006 134 refill capacities cceees 175 specifications 176 177 Exhaust fume ccccceeeseeeees 88 FIOOY MALS 2s4ssss8eeeic02iseeespeacessees 52 Fluid capacities c eee 175 POS AMPS srin piee pasran 42 Puel ensine crete a 153 calculating fuel economy 158 CAD AEE A AEE ETES 155 CAPACITY cecariioiiaa 175 choosing the right fuel 156 comparisons with EPA fuel economy estimates 008 161 detergent in fuel 0 ee 157 filling your vehicle with fuel 153 155 158 filter specifications 158 175 fuel pump shut off switch 106 GAUSS cepscevessnstarssisvestcesactowoesdacte 13 improving fuel economy 158 low fuel warning light 8 octane rating 156 177 178 QUALIEY ooo eee eecceseeeeeneeees 157 running out of fuel 157 safety information relati
132. s Inserting a tape Push only slightly when inserting a cassette tape with the open edge to the right A cassette deck loading mechanism pulls the tape in the rest of the way You can switch from CD if equipped to tape play by inserting a tape into the cassette deck Tape play select Insert a tape to begin tape play Push only slightly when inserting a cassette tape with the open edge to the right A cassette deck loading mechanism pulls the tape in the rest of the way Controls and features 29 Controls and features Rewind The rewind control works in tape and CD modes if equipped e In tape mode radio play will continue until rewind is stopped with the TAPE control or the beginning of the tape is reached e In CD mode pressing the REW control for less than three seconds results in slow rewind Pressing the control for more than three seconds results in fast rewind Fast forward The fast forward control works in tape and CD modes if equipped e In the tape mode tape direction will automatically reverse when the end of the tape is reached e In CD mode pressing the control for less than three seconds results in slow forward action Pressing the control for more than three seconds results in fast forward action Tape side select Press this control to play the alternate side of a tape Eject function Press the control to stop and eject a tape a Gew a 30
133. s will illuminate With the all door remote entry system press the control a second time within five seconds to unlock all doors Locking the doors amp Press this control to lock all doors On vehicles equipped with the driver s door only remote entry system only the driver s door will lock To confirm doors are closed and locked press the lock control a second time within five seconds The door s will lock again the horn will chirp once and the lamps will flash If any of the doors are open or ajar the horn will make two quick chirps reminding you to properly close the doors This process will also arm your anti theft system if equipped For more information on arming the anti theft system refer to Anti theft system in this chapter 54 Controls and features Opening the trunk qm Press the control once to open the trunk Ensure that the trunk is closed and latched before driving your vehicle Failure to latch the trunk completely may cause objects to fall out of the trunk or block the rear view Sounding a panic alarm a Press this control to activate the alarm To deactivate the alarm press the control again or turn the ignition to ACC or ON This device complies with part 15 of the FCC rules and with RS 210 of Industry Canada Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interfere
134. sconnect the battery the engine must relearn its idle conditions before your vehicle will drive properly as explained in the Battery section in this chapter Working with the engine off e Automatic transaxle 125 Maintenance and care 1 Set the parking brake and ensure the gearshift is securely latched in P Park 2 Turn off the engine and remove the key 3 Block the wheels to prevent the vehicle from moving unexpectedly e Manual transaxle 1 Set the parking brake depress the clutch and place the gearshift in 1 First 126 Maintenance and care 2 Turn off the engine and remove the key 3 Block the wheels to prevent the vehicle from moving unexpectedly Working with the engine on e Automatic transaxle 1 Set the parking brake and ensure the gearshift is securely latched in P Park 2 Block the wheels to prevent the vehicle from moving unexpectedly 127 Maintenance and care Do not start your engine with the air cleaner removed and do not remove it while the engine is running e Manual transaxle 1 Set the parking brake depress the clutch and place the gearshift in N Neutral 2 Block the wheels to prevent the vehicle from moving unexpectedly Do not start your engine with the air cleaner removed and do not remove it while the engine is running 128 Maintenance and care OPENING THE HOOD qm 1 Inside the vehicle pull the hood release handle locate
135. should not exceed the front axle reserve capacity FARC Additional frontal weight may be added to the front axle reserve capacity provided you limit your payload in other ways i e restrict the number of passengers or amount of cargo carried You may add equipment throughout your vehicle if the total weight added is equal to or less than the total axle reserve capacity TARC weight You should NEVER exceed the total axle reserve capacity Always ensure that the weight of passengers cargo and equipment being carried is within the weight limitations that have been established for your vehicle including both gross vehicle weight and Front and rear gross axle weight rating limits Under no circumstance should these limitations be exceeded Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and or personal injury 101 Driving TRAILER TOWING Your vehicle is capable of towing a trailer up to 454 kg 1 000 Ibs gross trailer weight with a maximum tongue load of 45 kg 100 Ibs Do not tow a trailer until your vehicle has been driven at least 800 km 500 miles Towing a trailer places an additional load on your vehicle s engine transaxle brakes tires and suspension Inspect these components carefully after towing Do not exceed the GVWR or the GAWR specified on the certification label Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of the vehicle a
136. ss the bottom portion of the rocker switch to open Express down To make the driver window open fully without holding the window control press the driver window control completely down and release quickly Depress again to stop window operation 51 Controls and features POSITIVE RETENTION FLOOR MAT Position the floor mat so that the eyelet is over the pointed end of the retention post and rotate forward to lock in Make sure that the mat does not interfere with the operation of the accelerator or the brake pedal To remove the floor mat reverse the installation procedure 4 Z INTERIOR LUGGAGE COMPARTMENT RELEASE IF EQUIPPED Your vehicle is equipped with a mechanical interior luggage compartment release handle that provides a means of escape for children and adults in the event they become locked inside the luggage compartment Adults are advised to familiarize themselves with the operation and location of the release handle To open the luggage compartment door lid from the inside pull the illuminated T shaped handle and push up on the trunk lid The material that the handle is made of will glow for hours in the darkness of the luggage compartment following brief exposure to ambient light The T shaped handle will be located either on the luggage compartment door lid or inside the luggage compartment near the tail lamps 52 Controls and features Keep vehicle doors
137. stem s bass output e The treble adjust control allows you to increase or decrease the audio system s treble output 21 Controls and features Speaker balance fade adjust e Speaker sound distribution can be adjusted between the right and left speakers e Press the BAL control Toggle gt between the and control to adjust the speaker sound e Speaker sound can be adjusted Fave between the front and rear speakers Press the FADE control Toggle between the and control to adjust the speaker sound Inserting a tape Push only slightly when inserting a cassette tape with the open edge to the right A cassette deck loading mechanism pulls the tape in the rest of the way You can switch from radio to tape play by inserting a tape into the cassette deck Tape play select Insert a tape to begin tape play Push only slightly when inserting a cassette tape with the open edge to the right A cassette deck loading mechanism pulls the tape in the rest of the way Rewind The rewind control works in tape mode e In tape mode radio play will continue until rewind is stopped pe with the TAPE control or the beginning of the tape is reached 22 Fast forward The fast forward control works in tape mode e In the tape mode tape direction will automatically reverse when the end of the tape is reached Tape side select Press this control to play the alternate side
138. t adjuster to make sure it is locked in place Position the shoulder belt height adjusters so that the belt rests across the middle of your shoulder Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a collision Lap belts if equipped Adjusting the lap belt The lap belt does not adjust automatically The lap belts should fit snugly and as low as possible around the hips not around the waist 66 Seating and safety restraints Insert the tongue into the correct buckle the buckle closest to the direction the tongue is coming from To lengthen the belt turn the tongue at a right angle to the belt and pull across your lap until it reaches the buckle To tighten the belt pull the loose end of the belt through the tongue until it fits snugly across the hips Shorten and fasten the belt when not in use Safety belt extension assembly If the safety belt assembly is too short even when fully extended 20 cm 8 inches can be added to the safety belt assembly by adding a safety belt extension assembly part number 611C22 Safety belt extension assemblies can be obtained from your dealer at no cost Use only extensions manufactured by the same supplier as the safety belt Manufacturer identification is located at the end of the webbing on the label Also use the safety belt extension only if the safety belt is too short for you when fully ex
139. t is at the cold fill level or within the cold fill range as listed in the engine coolant reservoir depending upon application 139 Maintenance and care e NEVER increase the coolant concentration above 60 e NEVER decrease the coolant concentration below 40 e Engine coolant concentrations above 60 or below 40 will decrease the freeze protection characteristics of the engine coolant and may cause engine damage Plain water may be added in an emergency but you must replace it with a 50 50 mixture of engine coolant and distilled water as soon as possible Check the coolant level in the reservoir before you drive your vehicle the next few times with the engine cool If necessary add a 50 50 mixture of engine coolant and distilled water to the engine coolant reservoir until the coolant level is at the cold fill level or within the cold fill range as listed on the reservoir depending upon application Have your dealer check the engine cooling system for leaks if you have to add more than 1 0 liter 1 0 quart of engine coolant per month To avoid scalding hot steam or coolant from being released from the engine cooling system never remove the radiator cap while the engine is running or hot Failure to follow this warning may result in damage to the engine s cooling system and possible severe personal injury If you must remove the radiator cap follow these steps to avoid personal injury 1 Before yo
140. tape The tape scans in a forward direction At the end of the tape s first side direction automatically reverses to the opposite side of the tape To stop on a particular selection press the control again Scan function in CD mode if equipped Press the SCAN control to hear a short sampling of all selections on the CD The CD scans in a forward direction wrapping back to the first track at the end of the CD To stop on a particular selection press the control again Radio station memory preset The radio is equipped with six station memory preset controls These controls can be used to select up to six preset AM stations and twelve FM stations six in FM1 and six in FM2 Setting memory preset stations 1 Select the frequency band with the AM FM select control 2 Select a station Refer to Tune adjust or Seek function for more information on selecting a station 3 Press and hold a memory preset control until the sound returns ER 2 indicating the station is held in memory on the control you selected A 28 Bass treble adjust The bass adjust control allows you to increase or decrease the audio system s bass output The treble adjust control allows you to increase or decrease the audio system s treble output Speaker balance fade adjust Speaker sound distribution can be adjusted between the right and left speakers Speaker sound can be adjusted between the front and rear speaker
141. temperature display Heavy duty battery Removable luggage rack Removable luggage rack adapters Soft luggage cover Speed control Protection and appearance equipment Air bag anti theft locks Carpet floor mats Cleaners waxes and polishes Flat splash guards Front end covers full Lubricants and oils Molded splash guards Molded vinyl floor mats Rear decklid spoilers Touch up paint Universal floor mats For maximum vehicle performance keep the following information in mind when adding accessories or equipment to your vehicle 191 Customer assistance e When adding accessories equipment passengers and luggage to your vehicle do not exceed the total weight capacity of the vehicle or of the front or rear axle GVWR or GAWR as indicated on the Safety compliance certification label Consult your dealer for specific weight information e The Federal Communications Commission FCC and Canadian Radio Telecommunications Commission CRTC regulate the use of mobile communications systems such as two way radios telephones and theft alarms that are equipped with radio transmitters Any such equipment installed in your vehicle should comply with FCC or CRTC regulations and should be installed only by a qualified service technician e Mobile communications systems may harm the operation of your vehicle particularly if they are not properly designed for automotive use or are not properly installed When operated such systems m
142. tended Do not use extensions to change the fit of the shoulder belt across the torso Safety belt warning light and indicator chime A The seat belt warning light illuminates in the instrument cluster and a chime sounds to remind the occupants to fasten their safety belts 67 Seating and safety restraints Conditions of operation The driver s safety belt is not buckled before the ignition switch is turned to the ON position The driver s safety belt is buckled while the indicator light is illuminated and the warning chime is sounding The driver s safety belt is buckled before the ignition switch is turned to the ON position Belt minder if equipped The safety belt warning light illuminates1 2 minutes and the warning chime sounds 4 8 seconds The safety belt warning light and warning chime turn off The safety belt warning light and indicator chime remain off The Belt Minder feature is a supplemental warning to the safety belt warning function This feature provides additional reminders to the driver that the driver s safety belt is unbuckled by intermittently sounding a chime and illuminating the safety belt warning lamp in the instrument cluster The driver s safety belt is not buckled approximately 5 seconds after the safety belt warning light has turned off The driver s safety belt is buckled while the safety belt indicator light is illuminated and the safety belt warning chime
143. ter and Ford Premium Engine Coolant E2FZ 19549 AA in Canada Motorcraft CXC 10 or an equivalent premium engine coolant that meets Ford specification ESE M97B44 A A 50 50 mixture of distilled water and Ford Premium Engine Coolant provides e maximum cooling system efficiency e freeze protection down to 36 C 34 F e boiling protection up to 129 C 265 F 137 Maintenance and care e protection against rust and other forms of corrosion e an accurate temperature readout from the engine coolant gauge The engine coolant must be maintained at the correct fluid level and concentration to work properly If the engine coolant fluid level and concentration is not maintained correctly damage to the engine and cooling system may result e Coupe e Sedan When the engine is cold check the level of the engine coolant in the reservoir e The engine coolant should be at the cold fill level as listed on the engine coolant reservoir e Refer to the Scheduled Maintenance Guide for service interval schedules 138 Maintenance and care e Be sure to read and understand Precautions when servicing your vehicle in this chapter If the engine coolant has not been checked at the recommended interval the engine coolant reservoir may become low or empty If the reservoir is low or empty add engine coolant to the reservoir Refer to Adding engine coolant in this chapter Autom
144. testing sreresierrereisen 162 196 Instrument panel ccccceeees 8 CLE ATIING 5 ssi cceeertscaedenc Geiedirecas 173 CLUSUGR serere 8 173 lighting up panel and interior 0 0 16 location of components 8 Jump starting your vehicle 119 Keys key in ignition chime 12 positions of the ignition 41 Lamps bulb replacement specifications chart 168 cargo lamps sssercscsrireiissesresss 16 daytime running light 41 fog lamps srneci ustes 42 headlamps sororisssnsiss 41 163 headlamps flash to pass 42 instrument panel dimming 16 interior lamps 006 49 167 replacing bulbs 163 165 166 167 Lane change indicator see Turn signal eee 43 Lights warning and indicator 8 air DAS eea E 10 anti lock brakes ABS 11 90 anti theft sesscsroaiesnea 11 Drake si gesexvesssasaceitipaccisisecesvevesectys 10 charging SysteM c eeee 11 high BEAM sprorieserersegse 11 LOW el esiema ei 8 OIl PYESSULE 02i5 4 cehcesensceveeeervecs 12 Safety Delt saranorcirirnerisiaiii 10 service engine SOON n 9 turn signal indicator 11 Load limits scsesiscsirersrsssessss 100 GAWR ooneeecccccccccesecsetseessseeesees 100 CVV pann Ean 100 trailer tOWING aicneprinisesodisi 100 Locks CHAPO OE srera Betis 50 Lubricant specifications 176 177 Manual transaxle 2 0 97 fluid capacities
145. the back seats 39 Controls and features e Remove any snow ice or leaves from the air intake area at the bottom of the windshield e If your vehicle has been parked with the windows closed during hot weather the air conditioner will do a much faster job of cooling if you drive for two or three minutes with the windows open This will force most of the hot stale air out of the vehicle Then operate your air conditioner as you would normally e When placing objects on top of your instrument panel be careful to not place them over the defroster outlets These objects can block airflow and reduce your ability to see through your windshield Also avoid placing small objects on top of your instrument panel These objects can fall down into the defroster outlets and block airflow and possibly damage your climate control system Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop REAR WINDOW DEFROSTER Qy Clears the rear window of thin ice and fog To operate 1 Turn the ignition to the ON position 2 Press and release the control once to turn on The light will be lit while the rear window defroster is on 3 Press and release the control again to turn off The defroster will automatically turn off after 15 minutes 40 Controls and features POSITIONS OF THE IGNITION 1 LOCK locks the steering wheel gearshift lever automatic transaxle
146. the label surface downward e The disc is dusty or defective e The player s internal temperature is above 60 C 140 F Allow the player to cool down before operating e A disc with format and dimensions not within industry standards is inserted Cleaning compact discs Inspect all discs for contamination before playing If necessary clean discs only with an approved CD cleaner and wipe from the center out to the edge Do not use circular motion CD and CD changer care e Handle discs by their edges only Never touch the playing surface e Do not expose discs to direct sunlight or heat sources for extended periods of time e Do not insert more than one disc into each slot of the CD changer magazine Cleaning cassetie player if equipped Clean the tape player head with a cassette cleaning cartridge after 10 to 12 hours of play in order to maintain the best sound and operation Cassette and cassette player care e Use only cassettes that are 90 minutes long or less 34 Controls and features e Do not expose tapes to direct sunlight high humidity extreme heat or extreme cold Allow tapes that may have been exposed to extreme temperatures to reach a moderate temperature before playing e Tighten very loose tapes by inserting a finger or pencil into the hole and turning the hub e Remove loose labels before inserting tapes e Do not leave tapes in the cassette player for a long time when not being played Radio
147. ther again with a damp cloth to remove soap residue Dry with a soft cloth For tougher soiling concerns Ford recommends using the Deluxe Leather Care Kit F8AZ 19G253 AA which is available from your Ford Dealer This mild cleaner and special pad cleans the leather and maintains its natural beauty Follow the instructions on the cleaner label Regular cleaning of your leather upholstery helps maintain its resiliency and color Do not use household cleaning products alcohol solutions solvents or cleaners intended for rubber vinyl or plastics Cleaning the interior fabric Remove dust and loose dirt with a whisk broom or a vacuum cleaner Remove fresh spots immediately Do not use household or glass cleaners These agents can stain and discolor the fabric Use a mild soap and water solution if necessary 174 Capacities and specifications MOTOCRAFT PART NUMBERS Component 2 0L SOHC I4 2 0L DOHC Zetec pee ge eee Refer to Vehicle Emissions Control Information VECI decal for spark plug gap information Tf a spark plug is removed for inspection it must be reinstalled in the same cylinder If a spark plug needs to be replaced use only spark plugs with the same service part number suffix letter as shown on the engine decal REFILL CAPACITIES Ford Part Brake fluid High Fill to line on Performance reservoir DOT 3 Motor Vehicle Brake Fluid Engine coolant Premium Engine Automatic 6 0L Coolant transaxles 6 3 qua
148. tion Indicates that this Owner Guide contains information on this subject Please refer to the Index to locate Lli the appropriate section which will provide you more information Introduction WARNINGS Warnings provide information which may reduce the risk of personal injury and prevent possible damage to others your vehicle and its equipment BREAKING IN YOUR VEHICLE There are no particular breaking in rules for your vehicle During the first 1 600 km 1 000 miles of driving vary speeds frequently This is necessary to give the moving parts a chance to break in INFORMATION ABOUT THIS GUIDE The information found in this guide was in effect at the time of printing Ford may change the contents without notice and without incurring obligation Introduction These are some of the symbols you may see on your vehicle Vehicle Symbol Glossary Safety Alert Fasten Safety Belt Air Bag Side Child Seat Installation Warning Brake System Brake Fluid Non Petroleum Based Master Lighting Switch Fog Lamps Front Fuel Pump Reset Windshield Defrost Demist Power Windows Front Rear A A AT fe yy 0 Ys y YZ aN See Owner s Guide Air Bag Front Child Seat Child Seat Tether Anchorage Anti Lock Brake System Traction Control Hazard Warning Flasher Fuse Compartment Windshield Wash Wipe Rear Window Defrost Demist Power Window Lockout Introduction Vehic
149. trol is pressed The dome lamp must be set to the DOOR position in order for the illuminated entry system to operate ANTI THEFT SYSTEM IF EQUIPPED When armed the anti theft system will help prevent your vehicle from unauthorized entry If there is any potential perimeter anti theft problem with your vehicle ensure ALL key fobs remote entry transmitters are brought to the dealership to aid in troubleshooting 57 Controls and features Arming the anti theft system Turn the ignition to OFF and press the lock control on the remote entry transmitter Identifying an armed system While the system is arming the THEFT light in the instrument cluster will illuminate for 30 seconds After 30 seconds THEFT will flash indicating the system is armed If the system is arming with the doors open the THEFT light will stay illuminated until all the doors are closed and then illuminate for 30 seconds and begin flashing When an unauthorized entry occurs the activated system will e flash the parking lamps and the THEFT light e sound the horn The flashing parking lamps and the honking horn automatically shut off after about three minutes and will remain off unless another unauthorized entry is attempted Disarming the anti theft system Disarming an untriggered anti theft system Press the unlock control to disarm a triggered or untriggered system 58 Controls and features A triggered system may also be disarme
150. ture is below 12 C 10 F and the engine does not start in 15 seconds on the first try turn the key OFF and wait 10 seconds and try again If the engine does not start in two attempts Press the accelerator pedal all the way to floor and hold Turn the key to START position 4 When the engine starts release the key then release the accelerator pedal gradually as the engine speeds up 5 After idling for a few seconds apply the brake and release the parking brake Using the engine block heater if equipped An engine block heater warms the engine coolant which improves starting warms up the engine faster and allows the heater defroster system to respond quickly Use of an engine block heater is strongly recommended if you live in a region where temperatures reach 23 C 10 F or below For best results plug the heater in at least three hours before starting the vehicle Using the heater for longer than three hours will not harm the engine so the heater can be plugged in the night before starting the vehicle To prevent electrical shock do not use your heater with ungrounded electrical systems or two pronged cheater adapters 87 Starting Guarding against exhaust fumes Although odorless and colorless carbon monoxide is present in exhaust fumes Take precautions to avoid its dangerous effects If you ever smell exhaust fumes of any kind inside your vehicle have your dealer inspect and fix your vehicle immed
151. u remove the cap turn the engine off and let it cool 2 When the engine is cool wrap a thick cloth around the cap Slowly turn cap counterclockwise until pressure begins to release 3 Step back while the pressure releases 4 When you are sure that all the pressure has been released use the cloth to turn it counterclockwise and remove the cap Recycled engine coolant Ford Motor Company recommends the use of a recycled engine coolant produced by Ford approved processes Not all coolant recycling processes produce coolant which meets Ford specification ESE M97B44 A Use of a recycled engine coolant which does not meet the Ford specification may harm engine and cooling system components 140 Maintenance and care Always dispose of used automotive fluids in a responsible manner Follow your community s regulations and standards for recycling and disposing of automotive fluids Coolant refill capacity To find out how much fluid your vehicle s cooling system can hold refer to Refill capacities in the Capacities and specifications chapter Fill your engine coolant reservoir as outlined in Adding engine coolant in this chapter Severe climates If you drive in extremely cold climates less than 36 C 34 F it may be necessary to increase the coolant concentration above 50 NEVER increase the coolant concentration above 60 increased engine coolant concentrations above 60 will decrease the overheat protect
152. ud If a metal to metal continuous grinding or continuous squeal sound is present while braking the brake linings may be worn out and should be inspected by a qualified service technician Anti lock brake system ABS if equipped On vehicles equipped with an anti lock braking system ABS a noise from the hydraulic pump motor and pulsation in the pedal may be observed during ABS braking events Pedal pulsation coupled with noise while braking under panic conditions or on loose gravel bumps wet or snowy roads is normal and indicates proper functioning of the vehicle s anti lock brake system The ABS performs a self check after you start the engine and begin to drive away A brief mechanical noise may be heard during this test This is normal If a malfunction is found the ABS warning light will come on If the vehicle has continuous vibration or shudder in the steering wheel while braking the vehicle should be inspected by a qualified service technician The ABS operates by detecting the onset of wheel lockup during brake applications and compensates for this tendency The wheels are prevented from locking even when the brakes are firmly applied The accompanying illustration depicts the advantage of an ABS equipped vehicle on bottom to a non ABS equipped vehicle on top during hard braking with loss of front braking traction 89 Driving ABS warning lamp s The 3 warning lamp in the instrument c
153. uel vapor can cause serious illness and permanent injury e Avoid getting fuel liquid in your eyes If fuel is splashed in the eyes remove contact lenses if worn flush with water for 15 minutes and seek medical attention Failure to seek proper medical attention could lead to permanent injury e Fuels can also be harmful if absorbed through the skin If fuel is splashed on the skin and or clothing promptly remove contaminated clothing and wash skin thoroughly with soap and water Repeated or prolonged skin contact with fuel liquid or vapor causes skin irritation 154 Maintenance and care e Be particularly careful if you are taking Antabuse or other forms of disulfiram for the treatment of alcoholism Breathing gasoline vapors or skin contact could cause an adverse reaction In sensitive individuals serious personal injury or sickness may result If fuel is splashed on the skin promptly wash skin thoroughly with soap and water Consult a physician immediately if you experience an adverse reaction When refueling always shut the engine off and never allow sparks or open flames near the filler neck Never smoke while refueling Fuel vapor is extremely hazardous under certain conditions Care should be taken to avoid inhaling excess fumes The flow of fuel through a fuel pump nozzle can produce static electricity which can cause a fire if fuel is pumped into an ungrounded fuel container Use the following guidelines to avo
154. ures Audio system warranties and service Refer to the Warranty Guide for audio system warranty information If service is necessary see your dealer or a qualified technician CLIMATE CONTROL SYSTEM Heater only system if equipped e OFF LO e 5 lt j HI Z g P Fan speed control 8 Controls the volume of air circulated ros in the vehicle amp Temperature control knob Controls the temperature of the airflow inside the vehicle On heater only systems the air cannot be cooled below the outside temperature Mode selector control Controls the direction of the airflow HEF ae to the inside of the vehicle Wed Bt P 7s Panel Distributes outside air through the instrument panel registers e OFF Outside air is shut out and the fan will not operate e f Panel and floor Distributes outside air through the instrument panel registers and the floor ducts e lt A Floor Allows for maximum heating Distributes outside air through the floor ducts 36 Controls and features GA Floor and defrost Distributes outside air through the floor ducts and the windshield defroster ducts Distributes outside air through the windshield defroster ducts It can be used to clear ice or fog from the windshield Operating tips In humid weather select 47 before driving This will reduce fogging on your windshield After a few minutes select any desired position To prevent humidity buildup
155. use the safety seat properly the child may be injured in a sudden stop or collision When installing a child safety seat e Review and follow the information presented in the Air Bag Supplemental Restraint System section in this chapter e Use the correct safety belt buckle for that seating position the buckle closest to the direction the tongue is coming from Insert the belt tongue into the proper buckle until you hear a snap and feel it latch Make sure the tongue is securely fastened in the buckle e Keep the buckle release button pointing up and away from the safety seat with the tongue between the child seat and the release button to prevent accidental unbuckling Place seat back in upright position 78 Seating and safety restraints e Put the safety belt in the automatic locking mode Refer to Automatic locking mode passenger side front and outboard rear seating positions if equipped Ford recommends the use of a child safety seat having a top tether strap Install the child safety seat in a seating position which is capable of providing a tether anchorage For more information on top tether straps refer to Attaching safety seats with tether straps Carefully follow all of the manufacturer s instructions included with the safety seat you put in your vehicle If you do not install and use the safety seat properly the child may be injured in a sudden stop or collision Installing child safety seats
156. ust tire pressure to recommended specifications found on the Certification Label Improperly inflated tires can affect vehicle handling and can fail suddenly possibly resulting in loss of vehicle control Tire rotation Because your vehicle s tires perform different jobs they often wear differently To make sure your tires wear evenly and last longer rotate them as indicated in the Scheduled Maintenance Guide If you notice that the tires wear unevenly have them checked e Four tire rotation N AN K A t I l 151 Maintenance and care Replacing the tires Replace the tires when the wear band is visible through the tire treads pall When replacing full size tires never mix radial bias belted or bias type tires Use only the tire sizes that are listed on the Certification Label Make sure that all tires are the same size speed rating and load carrying capacity Use only the tire combinations recommended on the label If you do not follow these precautions your vehicle may not drive properly and safely Make sure that all replacement tires are of the same size type load carrying capacity and tread design e g All Terrain etc as originally offered by Ford Failure to follow these precautions may adversely affect the handling of the vehicle and make it easier for the driver to lose control and roll over Tires that are larger or smaller than your vehicle s original tires may also affect the ac
157. ving the fuel filler cap Otherwise fuel may spray out and injure you or others If you do not use the proper fuel filler cap excessive pressure or vacuum in the fuel tank may damage the fuel system or cause the fuel system to work improperly in a collision which may result in possible personal injury Choosing the right fuel Use only UNLEADED FUEL The use of leaded fuel is prohibited by law and could damage your vehicle Do not use fuel containing methanol It can damage critical fuel system components Your vehicle was not designed to use fuel or fuel additives with metallic compounds including manganese based compounds containing MMT Repairs to correct the effects of using a fuel for which your vehicle was not designed may not be covered by your warranty Octane recommendations Your vehicle is designed to use Regular unleaded gasoline with an R M 2 octane rating of 87 We do not recommend the use of gasolines labeled as Regular that are sold with octane ratings of 86 or lower in high altitude areas Do not be concerned if your engine sometimes knocks lightly However if it knocks heavily under most driving conditions while you are using fuel 156 Maintenance and care with the recommended octane rating see your dealer or a qualified service technician to prevent any engine damage Fuel quality If you are experiencing starting rough idle or hesitation driveability problems during a cold start
158. ystem on or off PUSH ON MAS Sa N Turn control to raise or lower VOL volume PUSH ON 1 18 Controls and features If the volume is set above a certain level and the ignition is turned off the volume will come back on at a nominal listening level when the ignition switch is turned back on If you wish to maintain your preset volume level turn the audio system off with the power control before switching off the ignition AM FM select The AM FM select control works in radio modes AM FM select in radio mode This control allows you to select AM or FM frequency bands Press the control to switch between AM FM1 or FM2 memory preset stations AM FM select in tape mode Press this control to stop tape play and begin radio play Tune adjust The tune control works in radio mode 19 Controls and features Tune adjust in radio mode e Press the lt q to move to the next frequency down the band whether or not a listenable station is located there Hold the lt Q to move through the lt q TUNE gt frequencies quickly e Press the gt to move to the next rX A frequency up the band whether NaI or not a listenable station is located there Hold gt for quick movement Seek function The seek function control works in radio or tape mode Seek function in radio mode e Press lt q to find the next listenable station down the frequency band e Press gt to find th

Ford 1998 Expedition Automobile User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents