Directed Electronics 410 Automobile Alarm User Manual
Contents
1. Model 410 Owner s Guide Limited Lifetime Consumer Warranty Directed Electronics Inc DET promises to the original purchaser to repair or replace with a comparable reconditioned model any of the purchased brand unit hereafter the unit excluding without limitation the siren the remote transmit ters the associated sensors and accessories which proves to be defective in work manship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met the unit was professionally installed and serviced by an authorized DEI dealer the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized DEI dealer and the unit is returned to DEI shipping prepaid with a legible copy of the bill of sale or other dated proof of purchase bearing the following information consumer s name telephone number and address the authorized dealers name telephone number and address complete product description including accessories the year make and model of the vehicle vehicle license number and vehicle identification number All components other than the unit including without limitation the siren the remote transmitters and the associated sensors and accessories carry a one year warranty from the date of purchase of the same This warranty is non transferable and is automatically void if the original purchaser has not completed the warranty card and mailed2. DEI is not offering a guarantee or insurance against vandalism damage or theft of the automobile its parts or contents and hereby expressly disclaims any liability whatsoever including without limitation liability for theft damage and or vandalism DEI does not and has not authorized any person or entity to create for it any other obligation promise duty or obligation in connection with this security system Make sure you have all of the following information from your dealer A clear copy of the sales receipt showing the following Date of purchase Your full name and address Authorized dealer s company name and address Type of alarm installed Year make model and color of the automobile Automobile license number Vehicle identification number All security options installed on automobile Installation receipts ii 1999 Directed Electronics Inc Table of Contents Limited Lifetime Consumer Warranty i Standard Configuration Transmitter Diagram 2 What Is Included 3 Important Information 3 FCC ID NOTICE s rr Net Hyde Hw rc ege ce tt 4 System Maintenance ds a cei ue matin rca cS ea RC qu 4 Your Warranty see ox RR eae RR IR 4 Transmitter Functions 5 Standard Configuration 5 Using Your System ooo
3. deac tivated and the vehicle s horn if connected will honk twice The parking lights will also flash twice if connected The red status LED will go out unless the system is programmed for passive mode If programmed for passive mode the LED will begin to flash rapid ly when the system is disarmed This indicates that the security system will re engage the Failsafe Starter Kill relay and re lock the doors if passive locking is selected in 30 seconds unless the key is turned on NOTE If the system has been armed with the remote transmitter you must use the transmitter or the Valet switch to disarm the system and deactivate the starter kill Manually unlocking the vehicle does not dis arm the system it will only unlock the doors 1999 Directed Electronics Inc 7 This feature allows you to override the Starter Kill without the trans mitter should it be lost damaged or disabled To do this you must have the vehicle s ignition key and know where the Valet switch is located Check with the installer for the location of the Valet switch Turn the ignition to the run position Press and release the Valet switch within 10 seconds The LED will stop flashing and the vehicle should start If it does not you may have waited too long Turn the ignition off and try again Silent Mode Mode Use the Silent Mode to temporarily turn off the arm or disarm con firmation honks by briefly pressing ca before either arm
4. on or off If programmed on the domelight will turn on for 30 seconds each time the ignition is turned off 1999 Directed Electronics Inc Owner Recognition Owner Recognition is a feature available exclusively from DEI Using a DEI Bitwriter hand held programming tool your dealer can program many of the system settings The programmer makes it possible to program different settings for each transmitter that is used with the system Then whenever a specific transmitter is used the system will recall the settings assigned to that transmit ter Owner Recognition lets up to four users of the system have dif ferent settings that meet their specific needs It is almost like hav ing four separate alarms in your vehicle one for each user NOTE Owner Recognition cannot be programmed without a Bitwriter and the necessary software Check with your dealer for more information Security amp Convenience Expansions Here we have listed only some of the many expansion options available Please consult your dealer for a complete explanation of all the options available to you Domelight Supervision If installed the domelight will illuminate for 30 seconds each time the system is disarmed using the trans mitter This is useful for seeing inside the vehicle at night prior to entering it 1999 Directed Electronics Inc 11 Valet Start System For the ultimate in convenience the Valet Start System can start your vehicle
5. ITY FOR THEFT DAMAGE AND OR VANDALISM 1999 Directed Electronics Inc i THIS WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE REMOVAL OR REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DEI OR ITS SUBSIDIARY THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA CAL IFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DEI SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DEI DEALER S PURCHASE PRICE OF THE UNIT DEI SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER INCLUD ING BUT NOT LIMITED TO ANY CONSEQUENTIAL DAMAGES INCIDENTAL DAMAGES DAMAGES FOR THE LOSS OF TIME LOSS OF EARNINGS COMMERCIAL LOSS LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE NOTWITHSTANDING THE ABOVE THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages This warranty gives you specific legal rights and you may also have other rights that vary from State to State This product may be covered by a Guaranteed Protection Plan GPP See your authorized DEI dealer for details of the plan or call DEI Customer Service at 1 800 876 0800 DEI security systems including this unit are deterrents against possible theft
6. cree ee She eee a td echo 6 Armitig LOCKING concreti RR Rr mte C pev 6 Disarming Unlocking 7 Disarming the FailSafe Starter Kill without a Transmitter 8 Silent Mode 422 448 Og ee Ren see 8 ges tue ge EEG RE ee 8 Valet Modes a is lire slam biens 8 Panic Mod sa rete isolate 9 Rapid Resume Logic 9 Programming Options 10 Owner Recognition 11 Security amp Convenience Expansions 11 Glossary of Terms cir ir Man Seeger eee See 13 Quick Reference Guide Removable 14 1999 Directed Electronics Inc 1999 Directed Electronics Inc What is Included The control module A pair of four button transmitters The red status LED indicator light A push button Valet switch Your warranty card Failsafe Starter Kill ready circuitry may require additional labor Important Information This system has been designed to provide years of trouble free op eration Due to the complexity of this system it must only be installed by an authorized dealer Installation of this product by any person other than an authorized dealer voids the warranty All dealers are provided with a preprinted dealer certificate to verify that they are authorized This owner s guide should help you to get the m
7. d of advanced electronic technology DEI is ISO 9001 registered Quality Directed Electronics products are sold and serviced throughout North America and around the world Call 800 274 0200 for more information about our products and services r fi DEI Al Directed Electronics Inc Vista CA 92083 www dei com 1999 Directed Electronics Inc All rights reserved G410A 2 00
8. e system and unlock the doors press D for one second The Failsafe Starter Kill will be deactivated and the vehicle s horn if connected will honk twice and the parking lights will flash twice Disabling the Failsafe Starter Kill without a transmitter Wi To do this you must have the vehicle s ignition key and know where the Valet switch is Be sure to check with the installer for the location of the Valet switch Turn on the ignition Press and release the Valet switch within 10 seconds The LED will stop flashing and the vehicle should start To enter or exit Valet Mode M Turn the ignition to the on position Turn the ignition back off Press and release the Valet switch within 10 seconds The Status LED will light steady if you have entered Valet Mode To exit Valet Mode repeat the steps above The LED will turn off when exiting Valet Mode To activate panic mode W Press E To exit panic mode W Press E or ED Of DO J8 e 10 asund ino ui daay 0 aduasajas sea pue yoinb e 104 pe3e ipur asaym aul payop Buoje 1n 14 1999 Directed Electronics Inc The company behind this system is Directed Electronics Inc Since its inception DEI has had one purpose to provide consumers with the finest vehicle security and car stereo products and accessories available The recipient of more than 20 patents in the fiel
9. eyless entry system is programmable making it pos sible to assign any transmitter button to any specific receiver func tion The transmitter initially comes programmed with Standard Configuration but may also be customized by an authorized deal er The buttons in all of the instructions in this manual correspond to a Standard Configuration transmitter Button The arming locking function is controlled by pressing di ED Button The disarming unlocking function is controlled by pressing ED ca Button Silent Mode and an optional auxiliary function are controlled by ca Silent Mode works by pressing Ci for less than one sec ond prior to arming or disarming with the transmitter An option al auxiliary function is controlled by pressing and holding Ci for 1 5 seconds The auxiliary output controls D Button The panic function is controlled by pressing and holding DE for one second 1999 Directed Electronics Inc 5 and ED Buttons An optional auxiliary convenience or expansion function that you have added to your system can be activated by pressing these but tons simultaneously The auxiliary output controls o gt Z Using Your System Arming Locking Pressing for one second arms the system and locks the doors The red LED will begin to flash once per second The Failsafe Starter Kill will prevent the vehicle s starter from cranking if it has been installed If connected the vehicle s
10. horn will honk and the parking lights will flash once to confirm arming of the system If the ignition is turned on while armed the horn will honk and the parking lights will flash if connected NOTE You must use your remote transmitter to lock the vehicle in order for the system to be armed Manually locking the vehicle does not arm the system it will only lock the doors If you have not used the remote transmitter to lock the vehicle doors i e the vehicle has been locked using the lock unlock switch the transmitter cannot be used to unlock the doors The system also can be programmed to arm the Failsafe Starter Kill relay automatically called passive mode If the system is pro 6 1999 Directed Electronics Inc grammed for passive mode it will automatically activate the Failsafe Starter Kill relay 30 seconds after the ignition is turned off Passive mode is indicated by rapid flashing of the LED after the ignition is turned off NOTE For passive mode to be effective the Failsafe Starter Kill relay must be installed If passive mode is programmed on it is also possible to program the system to lock the doors automatically This is called passive locking If passive locking is turned on care must be taken to pre vent the keys from being locked in the vehicle Disarming Unlocking To disarm the security system and unlock the doors of the vehicle press ED for one second The Failsafe Starter Kill will be
11. ing or disarming the system The confirmation honk s will then be elim inated for that one operation only To permanently turn off the arm and disarm confirmation honks contact your installation dealer Valet Mode You can prevent your system from automatically activating the Failsafe Starter Kill relay and locking the doors by using Valet Mode This is very useful when washing the vehicle or having it ser viced In Valet Mode the system will not activate the Starter Kill even with the transmitter but all convenience functions door locks trunk release etc will work normally 8 1999 Directed Electronics Inc To enter or exit Valet Mode with the Valet switch Turn the ignition on and then off Press and release the Valet switch within 10 seconds The status LED will light steady if you have entered Valet Mode To exit Valet Mode repeat the steps above The LED will turn off when exiting Valet Mode If you are threatened in or near your vehicle you can attract attention by triggering the system with your transmitter Just press and you will enter Panic Mode The horn will honk and the parking lights will flash for 30 seconds To stop Panic Mode at any time press ua or E on the transmitter NOTE In order for Panic Mode to function the vehicle s horn or option al siren as well as the vehicle s parking lights must be connected Rapid Resume Logic The system will store its current state to non v
12. it within ten 10 days of the date of purchase to the address listed on the card the unit s date code or serial number is defaced missing or altered the unit has been modified or used in a manner contrary to its intended purpose the unit has been damaged by accident unreasonable use neglect improper service installation or other causes not arising out of defects in materials or construction The warranty does not cover damage to the unit caused by installation or removal of the unit DEI in its sole dis cretion will determine what constitutes excessive damage and may refuse the return of any unit with excessive damage TO THE MAXIMUM EXTENT ALLOWED BY LAW ALL WARRANTIES INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY IMPLIED WARRANTY WARRANTY OF MERCHANTABILITY FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED AND DEI NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY OBLIGATION OR LIABILITY IN CONNEC TION WITH ITS PRODUCTS DEI DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS DEI SECURITY SYSTEMS INCLUDING THIS UNIT ARE DETERRENTS AGAINST POSSIBLE THEFT DEI IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM DAMAGE OR THEFT OF THE AUTOMOBILE ITS PARTS OR CON TENTS AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER INCLUD ING WITHOUT LIMITATION LIABIL
13. monitor engine functions and power your climate control system with a push of a button Over rev protection open hood lockout brake pedal shutoff and auto matic timer shutoff are all included This option is available only for automatic transmission fuel injected gasoline vehicles Power Window Control Power window control is provided with the 529T or 530T systems The 529T system will roll up two windows automatically when the system is armed or roll two windows down The 530T can roll two windows both up and down The 530T also provides one touch switch operation Power Trunk Release An auxiliary output of the system can oper ate a factory power release for the vehicle s trunk or hatch If the factory release is not power activated DEI s 522T trunk release solenoid can often be added Progressive Door Unlocking For added security your system can be configured to only unlock the driver s door when the unlock but ton is pressed The passenger door s can then be unlocked by pressing the unlock button again within 15 seconds of unlocking the driver s door 820T Valet CarxCom The 820T is a one way pager system that can be added to any compatible DEI security system Using the 820T many of the security and convenience features of your DEI security system can be operated from any touch tone telephone 12 1999 Directed Electronics Inc Glossary of Terms Control Unit The brain of your system Usually hidden unde
14. olatile memory If power is lost and then reconnected the system will recall the stored state from memory If the unit is in Valet Mode and the battery is disconnected for any reason such as servicing the car when it is reconnected the unit will still be in Valet Mode This applies to all states including arm disarm and Valet Mode 1999 Directed Electronics Inc 9 Programming Options Programming options control what your system does during normal operation and require little or no additional parts However some may require additional installation labor The following is a list of program settings with the factory settings in Bold 10 Passive mode or active mode In passive mode the Failsafe Starter Kill relay will be automatically activated 30 seconds after the ignition key is turned off Both the ignition switch controlled door lock and unlock fea tures can be turned on or off If ignition door lock is on the vehicle s door will lock three seconds after the key is turned on If ignition door unlock is on the vehicle s doors will unlock when the key is turned off Passive door locking with passive arming or active door locking only when arming with the transmitter This feature only works if passive arming has been turned on The locking and unlocking horn honk confirmations can be programmed on or off The vehicle s horn must be connected Domelight supervision when the key is turned off can be pro grammed
15. ost out of your sys tem Please take the time to read it thoroughly prior to using the system If you lose this manual you can print a copy from the internet at www dei com 1999 Directed Electronics Inc 3 FCC ID Notice This device complies with Part 15 of FCC rules Operation is subject to the following conditions 1 This device may not cause harmful interference and 2 This device must accept any interference re ceived including interference that may cause undesired operation Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this device Directed Electronics Inc 410A Tested to Comply C with FCC Standards System Maintenance The system requires no specific maintenance Each remote is pow ered by a miniature 3 volt battery type CR2032 that will last approximately one year under normal use When the battery weak ens the LED on the remote will flash quickly whenever it is used Your Warranty Your warranty card must be returned and the bar code serial num ber must not be removed If the warranty card is not returned you do not have a warranty It is also necessary to keep your proof of purchase which reflects that the product was installed by an au thorized dealer Make sure you receive the warranty card from your dealer 4 1999 Directed Electronics Inc Transmitter Functions Your vehicle k
16. r neath the dash area It houses the microprocessor which monitors your vehicle and controls all of the alarm s functions Failsafe Starter Kill An automatic switch controlled by the secu rity system that prevents the starter from cranking whenever the system is armed The vehicle is never prevented from cranking when the system is disarmed in Valet mode or should the starter kill switch itself fail Your system is ready for this feature howev er installation of this feature may require additional labor LED Red light mounted somewhere in the vehicle It is used to indicate the status of your system It is also used to report trig gers and faults in the system or sensors Transmitter Hand held remote control which operates the vari ous functions of your system Valet Switch A small push button switch mounted somewhere inside the vehicle It is used to override the alarm when a trans mitter is lost or damaged or to enter Valet mode 1999 Directed Electronics Inc 13 QUICK REFERENCE GUIDE To arm lock using your remote M Pressing for one second will arm the system and Lock the doors The red LED will begin to flash once per second The Failsafe Starter Kill will prevent the vehicle s starter from cranking if it has been in stalled The vehicle s horn if connected will honk and the parking lights will flash once to confirm arming of the system To disarm unlock using your remote Wi To disarm th
Download Pdf Manuals
Related Search