Digital Media MPS409 Switch User Manual
Contents
1. Instruction Manual for UltraSlimline Floor Fan Model 10187 with remote control Voltage 120V AC Frequency 60 HZ Current 0 6 A PLEASE READ AND SAVE THESE INSTRUCTIONS 2006 Seville Classics Inc 800 323 5565 or 310 533 3800 www sevilleclassics com Parts List FAN Body BASE Front BASE Back D Fan Body SCREWS Base SCREWS Remote Control IIIT ge STEP 1 Remove the 4 SCREWS D from the center post on the bottom of the FAN body A Fan Assembly Control Panel Turn the base upside down Unscrew the 2 base SCREWS and base CLIPS E from posts on the BASE back C Firmly snap the BASE front B onto the BASE back C by aligning the four holes onto the four posts Replace the SCREWS and CLIPS E so that the clips wraps over the BASE back Cland tighten Pass the Power Cord through the Push buttons to activate features center hole now in the center of the BASE Align the BASE front with the FAN AT F ON OFF Turns fan ON amp OFF front and insert the four posts on Smia the FAN body into the four holes on the top of the BASE it will only go one way Place the 4 SCREWS D into Speed Selection Allows three different speed settings the holes through the bottom of the base and tighten securely a O Low 2 gt O Medium 2 O High STEP 4 O Timing Selection There are 15 settings in 1 2 hour Run the power cord through the guide on increments Time increases with2. Avoid contact with fan s moving parts 14 Close supervision is necessary when operating fan near children 15 Do NOT mount fan on a wall or hang it from the ceiling 16 Use of attachments of any kind is NOT recommended 17 WARNING REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED CONTROL DEVICES Should you have any questions comments or suggestions please contact us at Seville Classics Inc Tel 800 323 5565 or 310 533 3800 www sevilleclassics com
3. 5 57 5 60 62 5 70 75 80 SECONDS Control Panel 2 Medium Natural Wind The wind settings will repeat the following 80 second wind cycle with Medium speed being the most common High Medium Low 0 5 1012 5 15 20 2 30 32 5 37 5 42 5 47 5 55 57 5 60 62 5 675 72 5 77 5 80 SECONDS 3 High Natural Wind The wind settings will repeat the following 80 second wind cycle with high speed being the most common High Medium Low 15 20 25 30 35 40 45 50 52 5 57 5 62 5 65 70 77 5 80 0 5 10 SECONDS Oscillating Selection This function starts amp stops the oscillation of the fan Controlling the Oscillation Angles To change the wind direction place both hands on the fan and turn the fan body to the left or right There are 5 positions to choose from to change the oscillation angle To have the fan fully oscillate left and right have the fan in the third or center position UltraSlimline Remote Control for Floor Fan To use your remote point the top end directly at the front of the fan aiming at the little window just below the control panel on the top of the fan Functions Q Power Button Turns fan ON amp OFF ym Speed Mode Changes wind speed from Low LO to Medium MED to High HI A Wind Mode Changes the wind mode from Normal wind to Natural wind to Sleeping wind 1 Normal Wind is indicated by no icon appearing in the upper left hand corner of the display AZ 2 Natural Wind is
4. each push of the the bottom of the BASE back by tucking the button 1 2 hour 1 hour 1 1 2 2 hours etc to a cord under the tabs Set fan upright maximum time setting of 7 1 2 hours on the base and it is ready for use The LED Indicators on the control panel are marked 0 5h 1h 2h 4h h for Hour The sum of the lit LED s is the total time period See further instructions on use care and Safety Control Panel A Selection of Wind Allows for three different wind settings 1 Normal Wind The Normal wind mode is simply the Low Medium amp High fan speed settings 2 Sleeping Wind The Sleeping Wind allows you to set a speed and that speed will gradually slow to Low The air flows as an evening breeze slowing to a light night breeze 1 Low Sleeping Wind The air flow will remain at Low speed 2 Medium Sleeping Wind The air flow begins at Medium speed for half an hour and then drop to Low speed 3 High Sleeping Wind The air flow will remain on High speed for half an hour then drop to Medium speed for half an hour and finally drop to Low speed Z 3 Natural Wind The natural wind mode automatically selects wind speed randomly as you would find outdoors The speeds are graphically described below 1 Low Natural Wind The wind settings will repeat the following 80 second wind cycle with Low speed being the most common High Medium Low 0 25 7 5 125 175 20225 275 325 375 40 4 52
5. indicated by a 7 blinking triangle icon appearing in the blinking Upper left hand corner of the display A 3 Sleeping Wind is indicated by a solid triangle icon appearing in the upper left hand corner of the remote solid Timer Changes the time the fan is on from 0 5 hr up to a max of 7 5 hr in 0 5 hr increments C Oscillation Turns the fan oscillation ON or OFF The remote control operates on 2 AAA batteries included DO NOT MIX OLD AND NEW BATTERIES DO NOT MIX ALKALINE STANDARD CARBON ZINC OR RECHARGEABLE NICKEL CADMIUM BATTERIES Storage amp Cleaning Instructions 1 To clean your fan first turn it OFF amp unplug it 2 Use a soft cloth to wipe the housing DO NOT use water gasoline polish or any chemical solution Do NOT soak immerse fan in water liquid 3 You can use a vacuum cleaner narrow tube with the brush attachment to clean all intake and exhaust vents This will remove dirt and lint that may accumulate over time DO NOT ATTEMPT TO TAKE APART FAN 4 Store in a dry place away from excessive heat and direct sunlight Important Safety Instructions READ amp SAVE THESE INSTRUCTIONS When using electrical appliances basic precautions should always be followed to reduce the risk of fire electric shock and injury 1 Use this fan only as directed in this manual Non recommended use may cause fire shock or injury 2 This fan is intended for personal use INDOORS It is
6. NOT designed for commercial industrial or outdoor use 3 Do NOT place fan in or near a window to avoid contact with the outdoor elements and to avoid exposure to direct sunlight Rain may create an electrical hazard Do NOT immerse fan plug or cord in water liquid Do NOT spray with water liquid DO NOT use Fan outdoors 4 Operate fan on a dry level surface 5 This appliance has a polarized plug one blade is wider than the other This plug is designed to reduce the risk of shock by only fitting into a polarized outlet one way If the plug does not fully fit in an outlet try reversing the plug If it still does not fit contact a qualified electrician Do not attempt to defeat this safety feature 6 A loose plug outlet connection may cause overheating and distortion of the plug Contact a qualified electrician to replace a loose or worn outlet 7 Always turn the fan off and unplug it when transporting it to another location and before cleaning 8 When disconnecting fan turn it off grip the plug firmly and pull it from the wall outlet Never pull it out by the cord 9 Do NOT operate the fan if the cord or plug is damaged the unit is malfunctioning has been dropped or is damaged in any way 10 Do NOT operate your fan in the presence of flammable and or explosive fumes 11 Do NOT place the fan or any of its parts near an open flame cooking appliance or heater 12 Do NOT operate the fan if housing has been removed or damaged 13
Download Pdf Manuals
Related Search