Clarion CZ109 CD Player User Manual
Contents
1. lt gt TEL SP lt gt TEL SW The adjustment item will be displayed for 2 seconds before showing the desired value Turn the ROTARY knob to select the desired value When ENT is flashing in the display press the EM button to adjust setting value After completing settings press the DISP button to return to the previous mode Setting the clock 2 1 Select CLOCK 3 1 Press the EN button 3 2 Press 144 or PPI to select the hour or minute 3 3 Turn the ROTARY knob to set the time The clock is displayed in 12 hour format 3 4 Press the FN button to store the time in memory and return to the previous mode Note You cannot set the clock when it is displayed with only the car s ignition on If the car s battery dies or is removed or the unit is removed the clock will be reset If another button operation is selected while setting the clock the clock set mode is canceled Displaying the settings You can see the state of current settings at any operation mode 2 1 Select SETTINGS 3 1 Turn the ROTARY knob to display the current settings When the setting is selected the current state will be displayed after 1 second Example After 1 second 14 02109 O Turning the screen saver on off This unit has a screen saver function in which various patterns and random characters can be displayed on the operation status indication area2. Depth 44 W X 113 H X 11 D mm Power Output 20 W RMS x 4 Channels at 4 and 1 THD N Signal to Noise Ratio 88 dBA reference 1 W into 4 Note e Specifications and design are subject to change without notice for further improvement Clarion Co Ltd All Rights Reserved Copyright 2008 Clarion Co Ltd PE 3159B 2008 10 Printed in China Imprim en Chine Impreso en China 280 8722 00
3. This function can be turned on off If a button is pressed while the screen saver is on the corresponding operation display is shown for about 30 seconds and then the display returns to the screen saver The factory default setting is ON 2 1 Select SCRN SVR 3 1 Turn the ROTARY knob to select ON or OFP Setting title scroll method Set how to scroll in CD TEXT and MP3 WMA titles The factory default setting is ON 2 1 Select SCROLL 3 1 Turn the ROTARY knob to select ON or OFF e ON Scroll automatically e OFF Scroll 1 time only O Setting dimmer control Dimmer control can be set ON or OFF The factory default setting is ON 2 1 Select DIMMER 3 1 Turn the ROTARY knob to select ON or OFP Setting car speaker output for cell phones When the AUX input jack is used to connect an AUX BLUETOOTH BB BLT370 sold separately The factory default setting is RIGHT To output the telephone calls set cell phone interrupt to ON 2 1 Select TEL SP 3 1 Turn the ROTARY knob to select RIGHT or LEFT RIGHT Telephone calls can be heard on the front right speaker connected to this unit LEFT Telephone calls can be heard on the front left speaker connected to this unit O Cell phone interrupt setting If you connect this unit and your cell phone with an optional cable you can listen to your c
4. modes 1 Press the SRC button to change operation mode 2 Each time the SRC button is pressed the operation mode changes as follows Radio CD MP3 WMA gt AUX gt Radio Adjusting the volume 1 Turn the ROTARY knob clockwise to increase volume turn counterclockwise to decrease volume Volume range is 0 minimum to 33 maximum Switching the display Press the DISP button to select desired display Sound Adjustment Sound effects and tone can be adjusted as desired To change sound settings 1 Press the SOUND button to switch to the sound adjustment display The factory default sound setting is Z EHCR Press Hd or PP to select the sound adjustment mode Each time 144 or gt gt I is pressed the sound adjustment mode changes as follows Z EHCR lt gt BASS gt TREBLE gt BALANCE lt gt FADER gt NF VOL When ENT is flashing in the display press the ENT button to adjust the setting value The sound adjustment mode is displayed for 2 seconds before showing the sound setting Turn the ROTARY knob to adjust the selected audio mode After completing settings press the SOUND button to return to the previous mode Setting the Z Enhancer Plus This unit has 4 sound tone effects stored in memory Select the effect you prefer The factory default setting is OFF 2 1 Select Z EHCR 3
5. no Tag input NO TITLE appears in the display e This unit supports MP3 ID3 Tags V2 3 2 2 1 1 7 0 e Tag display gives priority to V2 3 2 2 e For WMA album Tags the information written into the extension header is displayed e SO8859 1 ASCII S JIS characters can be displayed in Tags UNKNOW characters can be turned into 1SO8859 1 characters Titles up to 32 bytes can be displayed in CD MP3 WMA mode Selecting a track Track advance 1 Press the gt Pl button to move to the beginning of the next track 2 Each time the PP button is pressed the track advances to the beginning of the next track O Track back 1 Press the 144 button to return to the beginning of the current track 2 Press the 44 button twice to return to the beginning of the previous track Fast forward fast reverse Fast forward 1 Press and hold the PPI button 1 sec Fast reverse 1 Press and hold the 144 button 1 sec For MP3 WMA discs some time is required until to initiate movement between tracks Also some error may occur in the playing time Folder select Select a folder containing MP3 WMA files and begins playing the first track in the folder 1 Press UP or DN Press the UP button to move to the next folder Press the DN button to move to the previous folder 2 To select a track press 144 or PP Other play modes O Scan play This function locates and plays the first
6. position EJECT appears in the display Notes e If you force a CD in before auto reloading you may damage the CD e Ifa CD 12 cm is left ejected for 15 seconds it will be automatically reloaded auto reload Listening to a disc already loaded in the unit Press the SRC button to select CD MP3 WMA mode When the unit enters this mode playback starts automatically If no disc is loaded NO DISC appears in the title display 12 CZ109 Loading a CD 1 Insert a CD into the centre of the CD SLOT with label facing up LOADING appears in the display the CD enters the slot and play begins Notes e If the CD does not enter easily another CD may be in the unit or the unit may require service compact Discs without the alice or Wise mark and CD ROMs are not supported e Some CD R CD RW discs may not be usable Pausing play 1 Press the ENT button to pause play PAUSE appears in the display 2 To resume CD play press the FN button again Displaying CD titles This unit can display title data for CD text MP3 WMA discs 1 Each time the DISP button is pressed the title display will change CD TEXT discs Track Disc Artist Track MP3 WMA discs Track Folder Title Album Artist gt Track Notes e If the CD playing is not a CD text disc or no user title has been input NO TITLE appears in the display e If an MP3 WMA disc has
7. 1 Select the station you wish to store in ISR memory 2 Press and hold the ISR button 2 sec O Recalling a station with ISR While in any mode press the ISR button to turn on the radio function and tune the selected station ISR appears on the display Press the ISR button again to return to the previous mode CD MP3 WMA Operations MP3 WMA This unit supports to play MP3 WMA files Notes e If you play a WMA file with active DRM Digital Rights Management no audio is output WMA indicator flashes e Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries To disable DRM Digital Rights Management 1 In Windows Media Player 9 10 11 click on TOOL gt OPTIONS 3 MUSIC RECORD tab Under Recording settings unclick the check box for RECORD PROTECTED MUSIC Then reconstruct files Use personally constructed WMA files at your own responsibility Precautions when creating MP3 WMA files Usable sampling rates and bit rates 1 MP3 Sampling rate 8 KHz 48 kHz Bit rate 8 kbps 320 kbps VBR 2 WMA Bit rate 48 kbps 192 kbps O File extensions 1 Always add a file extension MP3 or WMA to MP3 or WMA files using single byte characters If a different or no file extension is appendea the file cannot be played 2 Files without MP3 WMA data will not play Instead w
8. 1 When you turn the ROTARY knob the tone effect changes as follows OFF lt gt B BOOST lt gt IMPACT lt gt EXCITE lt gt CUSTOM OFF No sound effect B BOOST Enhanced bass IMPACT Enhanced bass and treble EXCITE Enhanced bass mid and treble CUSTOM User customized When set to B BOOST IMPACT EXCITE 3 2 Press the FN button 3 3 Turn the ROTARY knob to adjust the setting Setting range 3 to 3 The factory default setting is 0 3 4 Press the EN button to return to the previous mode When set to CUSTOM 3 2 Press and hold the EXT button 1 sec Bass treble characteristics become flat and FLAT is show in the display 3 3 Turn the ROTARY knob to change to the OFF mode O Adjusting the bass This adjustment is supported only when Z Enhancer Plus is set to CUSTOM 2 1 Select BASS 3 1 Press the EN button 3 2 Press 144 or PP to change and select settings as follows B lt G 0 gt gt B lt F 60 gt lt gt Q 1 3 3 Turn the ROTARY knob to adjust values for gain F center frequency and Q curve B lt G 0 gt The factory default setting is 0 Adjustment range 7 to 7 B lt F 60 gt The factory default setting is 60 Adjustment range 60 80 100 200 Q1 The factory default setting is 1 Adjustment range 1 1 25 1 5 2 3 4 Press the ENT button
9. 10 seconds of all tracks recorded on a disc 1 Press the SCN button for scan play O Folder scan play This function locates and plays the first 10 seconds of the first tracks of all folders on an MP3 WMA disc 1 Press and hold the SCN button 1 sec for folder scan play Repeat play This function plays the current track repeatedly 1 Press the RPT button for repeat play O Folder repeat play Repeatedly plays all tracks of the current folder on an MP3 WMA disc 1 Press and hold the RPT button 1 sec for folder repeat play O Random play This function plays all tracks recorded on a disc in random order 1 Press the RDM button for random play O Folder random play This function plays all the tracks of all the folders recorded on an MP3 WMA disc in random order 1 Press and hold the RDM button 1 sec for folder random play O To cancel play modes 1 Press the button previously selected The play mode is canceled and the off mode appears in the display for 2 seconds If the error display appears these modes Scan Repeat Random can be canceled while still in play mode 02109 13 Operations Common to Each Mode To change settings 1 Press and hold the DISP button 1 sec to switch to the adjustment display 2 Press Hd or PPI to select the item name as follows CLOCK lt gt SETTINGS gt SCRN SVR SCROLL gt DIMMER
10. 6 A CD is loaded upside down Eject the disc and reload properly inside the CD deck and does not play If an error display other than the ones described above appears press the reset button If the problem persists turn off the power and consult your dealer CZ109 17 9 SPECIFICATIONS FM Tuner Frequency Range 87 9 MHz to 107 9 MHz Usable Sensitivity 9 dBf 50dB Quieting Sensitivity 15 dBf Alternate Channel Selectivity 70 dB Stereo Separation 1 kHz 35 dB Frequency Response 3 dB 30 Hz to 15 kHz AM Tuner Frequency Range 530 kHz to 1710 kHz Usable Sensitivity 25 uV CD Player System Compact disc digital audio system Usable Discs Compact disc Frequency Response 1 dB 5 Hz to 20 kHz Dynamic Range 1 kHz 85 dB Harmonic Distortion 0 01 Audio Maximum Power Output 200 W 50 W X 4 ch Bass Control Action 100 Hz 14 dB 14 dB Treble Control Action 10 kHz 14 dB 14 dB Line Output Level CD 1 kHz 1 8 V 18 CZ109 General Power Supply Voltage 14 4 V DC 10 8 to 15 6 V allowable negative ground Current Consumption Less than 15 A Speaker Impedance 4 Q 4 Q to 8 Q allowable Weight Source unit 2 53 Ib 1 15 kg Weight Remote control unit 1 41 oz 40 g including battery Dimensions Source unit 7 Width X 2 Height X 6 1 8 Depth 178 W X 50 H X 155 D mm Dimensions Remote control unit 1 3 4 Width X 4 5 16 Height X 7 16
11. Clarion Owner s manual Mode d emploi Manual de instrucciones CZ109 CD MP3 WMA RECEIVER AUTORADIO CD MP3 WMA RECEPTOR CD MP3 WMA 2 CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www clarion com Dear Customer Congratulations on your purchase of a Clarion mobile electronic products We are confident that you ll enjoy your Clarion experience There are many benefits to registering your product We invite you to visit our website at www clarion com to register your Clarion product We have made product registration simple with our easy to use website The registration form is short and easy to complete Once you re registered we can keep you informed of important product information Register at www clarion com it s easy to keep your Clarion product up to date INFORMATIONS DE L ENREGISTREMENT DE PRODUITS CLARION Pour les Etas Unis et le Canada seulement www clarion com Cher client Nous vous remercions d avoir achet ce produit lectronique mobile Clarion Nous sommes confiants que vous appr cierez votre exp rience Clarion ll y a beaucoup d avantage a enregistrer votre produits Nous vous invitons a visiter notre site Web www clarion com pour enregistrer votre produit Clarion Nous avons facilit la tache d enregistrement de produit simple et facile grace a notre site Web Le formulaire d enregistrement est court et facile compl ter Lorsque vous tes enregistrer nou
12. N EXPOSURE THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT INFORMATION FOR USERS CHANGES OR MODIFICATIONS TO THIS PRODUCT UNAPPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND VIOLATE FCC APPROVAL Handling Compact Discs e Compared to ordinary music CDs CD R and CD RW discs are easily affected by high temperatures and humidity potentially making them unplayable Therefore do not to leave them in the car for a long time Do not stick labels on compact discs or mark the surface with pens or pencils Display Screen In extreme cold the screen movement may slow down and the screen may darken but this is normal The screen will recover when it returns to normal temperature 3 CONTROLS Names of the Buttons and Their Main Functions E CD SLOT ENT RELEASE y gt m l 2 4 IR RECEIVER 4 EJECT g N LN IAN E MN N E g 144 gt gt C SPPOFOOJ E SRC SOUND UP ISR DN ROTARY DIRECT RELEASE button RDM button e Press to unlock DCP e Perform random play while in CD MP3 WMA ENT button mode Perform preset scan while in the radio mode RPT button e
13. Play or pause a track while in CD MP3 WMA e Perform repeat play while in CD MP3 WMA mode mode BND button SCN button Change bands or select seek tuning or Perform scan play in CD MP3 WMA mode manual tuning while in radio mode DISP button CD SLOT e Switch display mode Insert CDs here ROTARY knob IR RECEIVER Rotate to adjust the volume Receiver for remote control unit Operating ISR button range 30 all directions Recall ISR station stored in memory AUX input jack Press and hold 2 sec to store current Input jack for connecting external device station in ISR memory radio mode only SOUND button SRC button Press to switch to the sound adjust mode Turn the power on off UP DN buttons H4 gt gt I buttons e Select folders while in MP3 WMA mode Commence fast forward fast reverse mode DIRECT buttons 4 EJECT button e Store radio stations in memory or recall it e Press to eject disc directly while in radio mode cz109 5 4 DCP DETACHABLE CONTROL PANEL Removing the DCP A CAUTION 1 Press and hold the SRC button 1 sec to switch off power After removal be careful not to drop the 2 Press the RELEASE button DCP or subject it to strong impacts to prevent damage RELEASE button Once the RELEASE button is pressed lt and the DCP is unlocked car vibrations AN can cause the DCP to fall X The connector for the main unit and DCP N i
14. allation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio reception which can be determined by turning the equipment off and on the user is encouraged to consult the dealer or an experienced radio technician for help MODEL Clarion 12V GROUND AM 530 1710kHz FM 87 9 107 9MHz THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS 1 THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND 2 THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE CLARION CO LTD 7 2 SHINTOSHIN CHUO KU SAITAMA SHI SAITAMA 330 0081 JAPAN This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from MSLGP MANUFACTURED C ar SERIAL No Clarion Co Ltd PEC MADE IN 4 CZ109 A CAUTION USE OF CONTROLS ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATIO
15. alls on your car speakers When the AUX input jack is used to connect an AUX BLUETOOTH BB BLT370 sold separately The factory default setting is OFF 2 1 Select TEL SW 3 1 Turn the ROTARY knob to select setting When turning the ROTARY knob the setting changes as follows OFF gt ON lt gt MUTE e OFF This unit continues normal operation even when the cell phone is used ON Telephone calls can be heard from the speakers connected to the unit When listening to calls on your car speakers turn the ROTARY knob to adjust the volume MUTE The sound from this unit is muted during telephone calls Note e If connecting a hands free kit make sure the setting is ON to receive telephone audio through the system AUX function An external input jack AUX is provided on the front panel to allow playback of sound and music from external devices O Selecting AUX IN sensitivity Make the following settings to adjust sensitivity when the sound from an external device is difficult to hear even after adjusting the volume The factory default setting is MID 1 Press and hold the DISP button 1 sec 2 Select AUX SENS 3 Turn the ROTARY knob to select HIGH MID or LOW Note When AUX mode is selected AUX IN sensitivity can be set 02109 15 7 TROUBLESHOOTING Problem Cause Measure Power does not turn o
16. ause SCN button e Press for scan play e In MP3 WMA mode press and hold 1 sec for folder scan play RPT button e Press for repeat play e In MP3 WMA mode press and hold 1 sec for folder repeat play RDM button e Press for random play e In MP3 WMA mode press and hold 1 sec for folder random play CZ109 7 Inserting the Battery Slide remote control unit s rear cover in the direction shown Insert battery CR2025 into insertion guides with printed side up Press battery into compartment as shown Replace and slide cover until it clicks into place Notes Misuse may result in battery rupture and fluid leakage resulting in personal injury or damage Always follow these safety precautions Use only the designated battery e When replacing the battery insert with polarities correctly oriented Do not subject battery to heat or dispose in fire or water Do not attempt to disassemble the battery Dispose of used batteries properly 8 CZ109 6 OPERATIONS Note Refer to the diagrams in 3 CONTROLS page 5 when reading this chapter Basic Operations A CAUTION Be sure to lower the volume before switching off the unit power or car s ignition key The unit remembers its last volume setting Turning power on off 1 Press the SRC button to turn on power 2 Press and hold the SRC button 1 sec to turn off power Selecting
17. d automatically when the speaker protection circuit operates 2 If the sound is still muted consult your dealer CD MP3 WMA 16 No sound MP3 WMA files are absent on disc Write MP3 WMA files onto disc properly Files are not recognized as MP3 WMA files Use properly encoded MP3 WMA files File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo file system Sound skips or is noisy CD is dirty Clean the CD with a soft cloth CD is heavily scratched warped Replace with a CD without scratches Sound cuts out or skips Noise is generated noise is mixed with sound MP3 WMA files are not encoded properly Use properly encoded MP3 WMA files Sound is poor when power is first turned on Condensation may form on the internal lens when the car is parked in a humid place Let dry for about 1 hour with power on Wrong file name 02109 File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo file system 8 ERROR DISPLAYS If an error occurs one of the following messages is displayed Take the measures described below to eliminate the problem Error Display Cause Measure ERROR 2 A CD is caught inside the CD This is a failure of the CD deck mechanism Consult deck and is not ejected your dealer ERROR 3 A CD cannot be played due __ Replace with a non scratched non warped disc to scratches etc ERROR
18. e Buttons and Their Main Functions cooooccccnnccccnonacccnnnnnconancnnnnannnnnnn cnn nano na naar canaria cananea 5 4 DCP DETACHABLE CONTROL PANEL 5 REMOTE CONTROL secscssssecdocsesctscetsseveaseescaststcedcaeisacesscssistosiovessocssesesdstevisesdecescessdsiseicunsesssiscsoatsauers Functions of Remote Control Unit Buttons E A O 6 OPERATIONS peicveiscsisccevectsscscestessccsessexsvassetcessereutveseneeveoiesccsuecndeercateeieaseveexsterssverdesiveceseteeseareancereasss 8 Basic Opera Sii O A A E E E A C ere era 8 Radio Operations 10 CD MP3 WMA Operations 11 Operations Common to Each Mode ceccsceecceseseceeeeeeeeeseeaeeeeeeaeeeeeeaeseeeseeseesaeseeeaesaeeeeeeaeeneeeaeees 14 7 TROUBLESHOOTING isecsssniiocssscvesntenvceisecessecnterscascnsncancensosvsceisencexeecenscanserdcaudnsdevaneennassioeieocsecteiss 16 8 ERROR DISPLAYS AAA 17 9 SPECIFICATIONS AR e ae niona A ekeen a nadaa radd E aAa A Seaain dK REE aar Adia Eanna 18 1 FEATURES dise ALAS Ru gt piama AUBIQ I1D3 TAG Ay Media e Built in IR Eye RCB176 Remote Included e 4ch 2V RCA Output with Non Fader Volume Control e Front Panel 3 5mm Auxiliary Input 02109 3 2 PRECAUTIONS This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential inst
19. eration is performed for 10 seconds or more the mode is cancelled and the unit returns to the previous mode Setting the MAGNA BASS EXTEND The MAGNA BASS EXTEND function does not adjust low frequencies like normal sound adjustments but emphasizes the deep bass range with dynamic sound The factory default setting is OFF 1 Press and hold the SOUND button 1 sec to enable MAGNA BASS EXTEND 2 Press and hold the SOUND button 1 sec to disable MAGNA BASS EXTEND 10 CZ109 Radio Operations Listening to broadcasts 1 Press the SRC button and select radio mode 2 Press the BND button and select the reception band Each time the button is pressed the band changes as follows F1 FM1 gt F2 FM2 3 F3 FM3 gt AM gt F1 FM1 Tuning 3 tuning modes are available seek tuning manual tuning and preset tuning Seek tuning 1 Press the BND button and select the desired band FM AM If MANU appears in the display press and hold the BND button 1 sec MANU will turn off and seek tuning will be enabled 2 Press 144 or PP to automatically seek a station Manual tuning 2 modes are available Quick tuning and step tuning Quick tuning Press and hold 144 or PPI 1 sec to tune a station Step tuning Press 144 or gt I to manually tune a station Recalling a preset station A total of 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM can be
20. ill appear in the play time display O Logical format File system 1 When writing MP3 WMA files on a CD R or CD RW disc select ISO9660 level 1 2 or JOLIET or Romeo as the software format Normal playback may not be possible if recorded in other formats 2 The folder name and file name can be displayed as the title during MP3 WMA play However titles must be within 64 single byte alphabetical letters and numbers including extension 3 Do not affix a name to a file inside a folder with the same name 02109 1 1 Number of files or folders 1 Up to 256 files can be recognized per folder Up to 578 files can be played 2 Tracks are played in the order they were recorded onto the disc Tracks may not always be played in the order displayed on the PC 3 Some noise may occur depending on the type of encoder software used for recording Disc In Play function This function automatically turns on unit power and begins disc play if a disc is inserted when the car s ignition key is turned to the ON or ACC position A CAUTION Do not insert hands fingers or other foreign objects into the disc insertion slot Do not insert discs with adhesives such as cellophane tape or rental CD labels attached or discs with marks left from removal of such adhesives since the disc may become stuck and damage the unit Ejecting a CD 1 Press the 4 button to eject the CD Take it out from the ejected
21. n No sound Fuse is blown Replace with a fuse of the same amperage If the fuse blows again consult your dealer Incorrect wiring Consult your dealer No sound when operating the unit with amplifiers or power antenna attached Power antenna lead is short circuited or excessive current is required for remotely powering on the amplifiers or power antenna 1 Turn the unit off 2 Remove all wires attached to the power antenna lead Check each wire for possible short circuits using an ohm meter Turn the unit back on Reconnect each amplifier remote wire to the power antenna lead one by one If the amplifiers turn off before all wires are attached use an external relay to provide remote power on voltage excessive current required Nothing happens when buttons are pressed Display is not accurate Microprocessor malfunction due to noise etc Turn off power then press the RELEASE button and remove the DCP Use a thin rod to hold reset button depressed 2 sec If the reset button is pressed when a disc is loaded please eject the disc and load it once again before attempting to play it DCP or main unit connectors are dirty Wipe dirt off with a soft cloth dampened with cleaning alcohol No sound The speaker protection circuit is operating 1 Turn down sound volume Function can also be restored by turning power off and on again Speaker volume is reduce
22. s extremely important Be careful not to damage it by pressing with fingernails or sharp objects DCP Rear Panel DCP is unlocked 3 Remove DCP DCP connector Main unit connector Note e If the DCP is dirty wipe off with a soft dry cloth only Attaching the DCP 1 Insert the right end of DCP into main unit 2 Press left end of DCP into main unit 6 CZ109 5 REMOTE CONTROL Functions of Remote Control Unit Buttons Some buttons on the remote have different functions from those on the main unit fo transmitter sne A G a ST T gt i I BAUT PST ES D Im DISP RDM RPT Shared modes SRC button e Press to turn on power Press and hold 1 sec to turn off power Use to change operation mode A V buttons e Increases decreases volume MUTE button Turns mute function on off ISR button e Recalls ISR station stored in memory Press and hold 2 sec to store current station in ISR memory radio mode only DISP button Press to select desired display Radio mode BND button Switches reception band 144 gt P buttons e Change preset channels SCN button e Press for preset scan play e Press and hold 2 sec for auto store CD MP3 WMA modes 4 gt gt I buttons e Press to select tracks e Press and hold 1 sec for fast forward fast reverse I1 button Switches between playback and p
23. s pouvons vous tenir inform des informations important de produits Enregistrer www clarion com c est facile de mettre a jour votre produit Clarion INFORMACION DEL REGISTRO DE PRODUCT O DE CLARION Para USA y Canada nomas www clarion com Querido Cliente Felicitaciones por su compra de producto electr nico m vil de Clarion Estamos seguros que usted gozara de su experiencia con el producto de Clarion Hay muchas ventajas al registrar su producto Le invitamos a que visite nuestro sitio en internet www clarion com para registrar su producto de Clarion Hemos hecho el registro de producto facil en nuestro sitio La forma de registro es corta y facil de completar Una vez que lo registre podremos proporcionarle la informacion de su producto Registrese en www clarion com es facil mantener su producto de Clarion actualizado CZ109 Thank you for purchasing this Clarion product Please fully read this owner s manual before operating this equipment Check the contents of the enclosed warranty card and store it in a safe place with this manual Contents Te FEATURES iiccvisccncadecssneseseisoverssccateteatcsvceieeseseodednsscuaenvaocsseeisnsedsviessecdaseedsdesteest0eeisaisededestusvsessdesteatesteu 3 22 PRECAUTIONS sscissciicecccccssstecascesciececsessisasncedstadeedsaceissansoustacessseesiscaecoeixadescctazecnscesitaceseeascesiescuaseess 4 J CONTR AAA nn S eaaa ara APAA a saarea Aeiaaeeia iias 5 Names of th
24. to return to the 2 1 previous mode O Adjusting the treble This adjustment is supported only when Z Enhancer Plus is set to CUSTOM 2 1 Select TREBLE 3 1 Press the EN button 3 2 Press 144 or gt P I to change and select settings as follows T lt G 0 gt lt gt T lt F 10K gt 3 3 Turn the ROTARY knob to adjust values for gain and F center frequency T lt G 0 gt The factory default setting is 0 Adjustment range 7 to 7 T lt F 10K gt The factory default setting is 10K Adjustment range 10K 12 5K 15K 17 5K 3 4 Press the ENT button to return to the H previous mode CZ109 9 Adjusting the balance 2 1 Select BALANCE 3 1 Turn the ROTARY knob to adjust balance between right and left speakers The factory default setting is CENTER Adjustment range RIGHT 12 to LEFT12 Adjusting the fader 2 1 Select FADER 3 1 Turn the ROTARY knob to adjust balance between front and rear speakers The factory default setting is CENTER Adjustment range FRONT12 to REAR12 Adjusting the non fader volume Adjust volume output from the unit s non fader output terminal 2 1 Select NF VOL 3 1 Turn the ROTARY knob clockwise to increase volume turn counterclockwise to decrease volume The factory default setting is 0 Adjustment range 6 to 6 Note When in the sound adjustment mode if no op
25. used to store broadcast stations in memory Press the corresponding DIRECT button to automatically recall the stored frequency Manual memory 1 Use seek tuning or manual tuning to select the desired station 2 Press and hold one of the DIRECT buttons 2 sec to store the current station in preset memory Auto store The auto store function stores up to 6 stations automatically tuned in sequential order If 6 stations cannot be found any previously stored station remains in its memory position 1 Press the BND button and select the desired band FM AM 2 Press and hold the EN button 2 sec The stations with good reception are stored automatically to the preset channels If auto store is performed in the FM bands the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations Preset scan Preset scan sequentially receives stations stored in preset memory This function is useful when searching for a station stored in the memory 1 Press the EM button 2 When the desired station is received press the oim button again to continue receiving that station Note Do not press and hold the EN button 2 sec or the auto store function will begin and the unit will begin storing stations Instant station recall ISR The ISR function allows instant access to a favorite preset station The function operates even when the unit is in other modes ISR memory
Download Pdf Manuals
Related Search