Canon SX20 IS Digital Camera User Manual
Contents
1. 13 Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your TV The following connection diagrams show you how to connect them to the back or the right side of the TV AV1 IN can handle CVBS and YPbPr AV2 IN CVBS and Y G AV3 and AV4 IN digital signals of a e g digital HD receiver or Progressive scan DVD SIDE CVBS and Y C Recorder O Connect the RF Antenna C to the RF IN socket of your recorder Connect another RF cable 2 from the output OUT of HR your recorder to the TV s input 75 Q I jack CABLE Better playback quality can be obtained if you also BO ais connect the Video Audio Left and Right only for stereo m in equipment AV cables 3 to the VIDEO AUDIO L and gt O R input jacks of AV2 IN T lun The MONITOR OUT connectors can be used to record programmes from your TV See Record with your P recorder p 18 our If your recorder has an S VHS video jack For improved picture quality connect an S video cable with the S VIDEO input instead of connecting the recorder to the video jack of AV2 IN REC S Video does not provide audio so audio cables must still be connected to provide sound Recorder and other A V peripherals O Interconnect your video recorder with extra We RF cables G caste O To obtain better picture quality also connect the Video Audio left and Audio right only for stereo equipment cables to t2. 2 the size of the menus on screen is reduced This is a normal behaviour Interference caused by fluorescent lights just above the TV may occur when having selected Pixel Plus 2 The modified adjustments for Contrast Brightness Colour Sharpness Tint Digital options and Dynamic Contrast are automatically stored Select Factory settings in the Setup menu General to restore the predefined factory settings see p 8 Sound Press the cursor right to select Sound Select the menu items in the Sound menu with the cursor Sound Smart sound Volume Equalizer Balance Loudness Headphone volume Surround mode Dual 1 11 Mono Stereo Digital Analogue 3D effect Notes Delta volume Smart sound up down and adjust the settings with the cursor left right Remember control settings are at normal mid range levels when the bar scale is centred Select Smart sound to display a list of predefined sound settings each corresponding with specific factory settings of Treble and Bass Personal refers to the personal preference settings of sound in the sound menu Dual FI is only selectable with dual sound transmission Mono Stereo is only selectable in case of analogue stereo AVL transmission Digital Analogue is only selectable in case of Digital transmission Surround modes can not be modified when a headphone has been connected es You can also select one of the Surround modes wit
3. Noise Reduction are controlled automatically Medium Sharpness Dynamic Contrast Noise reduction and Colour are controlled automatically Maximum Sharpness Dynamic Contrast Noise reduction Colour and Contrast are controlled automatically Press the cursor right to select INFO The Active Control demo menu appears The picture settings are being adapted continuously and automatically The menu items cannot be selected The sliders will be moving showing how the TV is tweaking the current picture None of the sliders is user controllable Press the OK key to switch off the Demo PP Smart surf With this feature you can easily switch between up to 9 different TV channels sources In the menu system you can set Smart surf to 2 or 9 programme Press this key to select the previously viewed TV channel or source in case of a 2 programme surf or to select the surf ring in case of a 9 programme surf In case of a 9 programme surf a list appears at the right side of the screen On top the most recent programme is displayed The puck is on the channel number currently viewed Press the P4P key to turn to the next channel in the list or press cursor up down to immediately select the desired TV channel of the list To add a new channel or source tune to the channel or source you wish to add Press the P P key Press the cursor right to add If there are already nine channels sources in the list the one at the bottom of the
4. Subtitle On or Off in the Features menu see p 10 The subtitle symbol appears when Subtitle On is selected Teletext menu O Press the MENU key to activate the menu Press the cursor up down to select the menu items Favourite You may create a list of eight favourite teletext pages in total selected from various TV channels To add a favourite page to the list Select a favourite teletext page Select Favourite in the teletext menu and press the cursor right to enter the list Press the cursor right again to add the page Press the MENU key to watch the current page oo 00 To watch a favourite page from the list When in Teletext use the P P key to browse through the favourite pages of the TV channel actually selected Note only the pages of the current channel can be selected Search On the keyboard on screen you can type in a word you want to search for in the teletext pages Whether upper or lowercase is used has no influence Searching for pagenumbers is not possible WORD NAME FOOTBALL Cancel Accept Delete 23 Space ABCDEFG HIJKLMN 45 6 G 7 CV ese wp We E9 NEW OXY L 0 Shift Special O Press the cursor left right up down to select the characters words or functions Press the OK key to confirm each character selected Select Cancel to cancel the word or character selected Space to enter a space Delete to delete the last character selected Shift to swi
5. Try another smart picture setting e Check the key on the remote control to make sure the correct signal source is selected Good picture but no sound e Increase the volume e Check that the television is not muted press the K key on the remote control e When no signal is detected the television automatically switches off the sound This is proper operation and does not indicate a malfunction e If you have attempted to hookup peripheral equipments check the audio jack connections e Check if the headphone is not plugged in e Check if the channel is broadcasting good quality sound Good sound but poor colour or no picture Adjust the contrast and brightness settings Try another smart picture setting Poor picture Sometimes poor picture quality occurs when having activated an S VHS camera or camcorder connected ot the right side of your TV and another device is connected to AV1 or AV2 at the same time In this case switch off one of the other equipments Snowish picture and noise Check the antenna connection Disturbed picture on AV3 or AV4 When selecting AV3 or AV4 and no signal is detected the picture shows a disturbed behaviour This is completely normal and should not to be worried about Horizontal dotted line e This may be caused by electrical interference hairdryer nearby neon lights etc e Switch off the equipment One white line across the screen Switch off
6. connected your equipment at the rear or on the right side of your TV Press the cursor up down Press OK If you want to change to TV channels Enter the channel number of the TV channel which you want to watch with the digit keys VCR Control keys Control keys Most of the audio and video equipment from our range of products can be operated with the remote control of your TV Press the VCR DVD SAT AMP or CD key according to the equipment you want to operate with this remote control See Use of the remote control p 3 VCR keys After you pressed the VCR key press one of the VCR keys of the remote control O for record 14 for rewind for stop gt for play gt gt for fast forward P for sequential channel selection from the videorecorder tuner 0 to 9 to select a channel number from your video recorder tuner These keys function with devices that uses the RCS signalling standard 0000 17 Record with your recorder with your recorder To record S VHS quality connect an S VHS peripheral directly to the recorder Record aTV programme You can record a TV programme using your recorder s tuner without affecting your TV Select the channel number on your recorder Set your recorder to record y See the handbook for your recorder Switching channel numbers on your TV does not disturb recording Record from MONITOR OUT You can record a programme on your
7. settings Tilt adjust Set Change code OSD Select Set or Change code with the cursor down Programme title If no code exists yet the menu item is set to Set code Follow Teletext 2 5 15 Auto surround Set Change code Colour PLL Source Source Setup the instructions on screen If a code has previously been entered the menu item is set to Change code Follow the instructions on screen All number combinations from 0000 to 9999 are valid numbers O Select Source with the cursor right Press the cursor down to select one of the external inputs Press the cursor right to enter the list of names of peripherals attached to the selected input O Select the peripheral device with the cursor up down This menu allows you to select the peripheral you connected to one of the external inputs TV Setup Demo Auto demo Install Teletext Install Main menu Picture Speakers Active control Dealer demo Digital processing Light sensor 3D Y C Comb filter Once you have selected the source e g VCR this AV input will automatically be selected when your remote control is in VCR mode and when you press the key on the remote control See p 17 The Demo menu allows to demonstrate the TV features separately or in a continuous loop O Select Demo in the Main menu with the cursor down Select Auto demo or one of the features with the cursor right and press the OK key on the remote control If Aut
8. temporary not available or not relevant are displayed in a light grey colour and cannot be selected Installation The installation menu contains the following items Language Automatic Manual Give name Reshuffle Favourite install install channels Install O lt _0 _ YY 07 Select the menu language the menu language Language install Press the MENU key on the remote control English Use the cursor down to select Install wu Use the cursor right to select Language Ben Follow the instructions on screen O Use the cursor up down to select your preferred language and press the OK key to confirm your selection O Proceed with the Install menu Store TV channels TV channels After language is set correctly you can now search for and store the TV channels in two different ways using Automatic Installation or Manual Installation tuning in channel by channel Select your choice with the cursor right Automatic installation O Select Automatic install in the Install menu Note All channels must be unlocked in order to autoprogram If requested enter your code to unlock all channels See TV Automatic install Features menu Childlock p 10 Install Press the cursor down The autoprogramming option label Start appears Install Start Press the cursor right O The message Searching appears and the progress of autoprogramming is displayed When the Automatic installation is comp
9. the memory is refreshed It may take some time for all pages to load Depending on the TV channel teletext is transmitted in different systems The colours used in the bottom line of the teletext page correspond with the colour keys of your remote control Switch Teletext on and off Press the amp key to switch teletext on or off The main index page appears on the screen CHEO It shows an information line at the top an option line at the bottom and a Ga puck in the top left corner of the screen 03 04 05 06 07 09 10 11 12 BBC CEEFAX 102 Select a Teletext page With the digit keys Enter the desired page number with the digit keys The page counter seeks the page or the page appears immediately when the page number has been stored in the memory A message appears when you have entered a non existent or incorrect page number Page numbers beginning with 0 or 9 do not exist Choose another number With the option line Select with the colour keys corresponding to the coloured options at the bottom of the screen the desired subject 11 Quickly run through the teletext pages Press the cursor up down or the P key to run through the previous or the following pages Select the previously selected page Press the P4P key Note Only possible when teletext pages are active not when the Teletext menu is displayed Select the index teletext page Press the grey colour key gt gt to displa
10. uX Interrupt the sound or restore it P Channel selection To browse through the TV channels and sources stored Only those channels which are in the favourite list can be selected with the P keys 0 9 Digit keys To select a TV channel For a two digit programme number enter the second digit within 2 seconds To switch immediately to a selected one digit TV channel keep the digit key pressed a bit longer GB no function On Screen information Press to display when available information about the selected TV channel and programme and the strength of the signal you are receiving through your aerial EY OOO E GOCOO gt OOO Auto format S O Vertical squeeze amp Active control Active control is a pro active and automatic system The TV continuously measures and corrects all incoming signals in order to provide the best picture possible Thanks to the Ambient Light Sensor which measures the light conditions of the room the contrast dynamic contrast brightness and colour picture settings are adjusted automatically The light sensor is active when the Active control function is switched to Medium or Maximum Press the amp key repeatedly to select the Active Control values Off Minimum Medium recommended or Maximum Off Sharpness and Dynamic Contrast are controlled automatically Minimum Sharpness Dynamic Contrast and
11. 29 740 mm Picture visible area 27 680 mm TV system 3 58 Playback system 3 58 Antenna input 75 ohms co axial Operating voltage Frequency Refer to the specifications at the back of the TV Power consumption Refer to the specifications at the back of the TV Audio Output 2x 15 W left right Dimension Width 785 mm Height 587 mm Depth 493 mm Nett weight 47 kg aprrox only International guarantee conditions This product is guaranteed by Philips for a period of one year after the date of purchase against defects due to faulty workmanship or materials The guarantee covers both parts and labor Service under guarantee is only provided upon presentation of reasonable evidence e g completed guarantee card or purchase receipts that the date of the claim is within the guarantee period The guarantee is not valid if the defect is due to accidental damage including in transport misuse of neglect and in case of alterations or repair carried out by unauthorized persons The guarantee may not apply if the product requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or if any damage results from these modifications Service during and after guarantee is available in all countries where this product is officially distributed by Philips In countries where
12. Philips do not distribute the product the local Philips Service organization will also provide Service although there may be a delay if the appropriate spare parts and technical manual are not readily available These statements do not affect your statutory rights as a consumer In the event of difficulty please contact the Philips Information Centre in any country see enclosed addresses 21
13. T jacks 5 to the TV s AV2 IN jacks DVD player or other accessory digital source equipment Monitor AV1 AV 2 out in VIDEO O y PR Ph S VIDEO F Qu OJO Equipment with AV connectors only Connect the video cables to the equipment s AV OUT jacks and to the TV s AV1 or AV2 IN jacks Connect the audio cables to the equipment s AUDIO Land R jacks and to the L AUDIO and R AUDIO AV1 or AV2 jacks on the TV According to where you connected the video cables to AV1 or AV2 Equipment with an S VIDEO connector O Connect an S video cable the AV2 S VIDEO input Note When using the s video connector do not connect any device to the video input Connect the audio cables to the equipment s AUDIO L and R jacks and to the L AUDIO and R AUDIO AV jacks on the TV With Component Video Output Connectors Connect the cables of your YPbPr equipment D to the YPbPr input AV1 IN sockets on the TV Note The YPbPr sockets on the TV are compatible with 480i interlaced 1 Fh output signals only not 480p progressive scan 2 Fh For reproduction of CVI Component Video Input and in order to have correct picture reproduction also connect a video cable to video of AV1 Q Note This connection is used for AV1 CVBS Connect the Audio left and right only for stereo devices cables 2 to the AUDIO L and R input of AVI Remark Equipment may also be connected to the AV IN ja
14. V PHILIPS Contents Preparation 0c cece cece cece eee e o Keypad on top of the TV 1 ccc cece eee ee eee Use of the remote control RC4301 To use the Menus 2 ce eee ee sense nenn une Installation adie seas sae aoe 8 ae Be OS Select the menu language Store TV channels 0 0 cece cece cence neces Automatic installation Manual installation Give name Reshuffle the programme list Select Favourite TV channels TV Setup iia i Se re ans General Source Demo cisco ee e ws hie Tasca E ges Se wee ewe SOS Picture menu Sound menu Features menu Teletext maes Switch Teletext on and off Select a Teletext page Due to continuous product improvements this manual is subject to change without notice eS End of life directives Philips is paying a lot of attention to producing environmentally friendly in green focal areas Your new TV contains materials which can be recycled and reused At the end of its life specialised companies can dismantle the discarded TV to concentrate the reusable materials and to minimise the amount of materials to be disposed of Your TV contains a tolerated small amount of mercury Please ensure you dispose of your old TV according to local regulations Previously selected teletext page Select the index teletext page Select subpages Special teletext functions Hypertext Select continuous subtitles Teletext MmenU Connect Peripheral Equipme
15. ain and enter a new personal 4 digit code The previous code is erased and the new code is stored Note The overriding code only works in the Set Change code menu Select one of the menu items of the child lock menu e Lock if you want to lock all channels and externals e Custom lock and press the cursor right Select Channel lock if you want to lock a certain TV channel or external e Unlock to disable all locks you have set On timer Press the cursor right again to select a day of the week or to select Daily O Select On timer with the cursor down Select Daily to set the On timer for daily VCR1 Sunday operation on the selected TV channel or BBC2 Monday source Off 2 a CNN a p g h n timer O On TVE Daily 15 45 6 ress the cursor right once again to enter the gt time Select On with the cursor right Enter the time with the digit keys or with the Press the cursor right again to enter the cursor up dow left right channel list O Press the OK key to activate Select the TV channel or external you want Press the MENU key to turn off the menu your TV to switch to on a selected time and Note To check your timer settings press the day key Teletext only English teletext supported Most TV channels broadcast information via teletext This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time After each programme change
16. ant to enter Select Space to enter a space Delete to erase the highlighted character in the name entered Shift to display upper or lowercase characters on the keyboard Special to display special characters on the keyboard Press OK to confirm It is possible to change the name stored in the memory or to assign a name to a TV channel or external for which a name has not yet been entered A name with up to 5 letters or numbers can be given to the channel numbers 0 to 99 and to the externals Press the cursor left repeatedly when you have finished the name giving Select another channel number and repeat steps 8 0 Reshuffle the channel list You can change the order of the stored TV channels Reshuffle Install Select Reshuffle in the Installation menu Follow the instructions on screen Select Favourite TV channels Favourite channels Select Favourite channels in the Install menu Install Select your channel number with the cursor up down Select Yes or No with the cursor right O Repeat and O for every TV channel or external you want to make a favourite or a non favourite TV channel or external Install TV Setup TV Setup General This menu allows you to change various settings that are General presumably adjusted less frequently than most other settings Setup Press the key on the remote control to get information Menu background about the selected menu item Smart surf Factory
17. cks SIDE at the right side of the TV Warning Never connect a signal to the Y input and video input at the same time This may cause picture distortion Equipment with Progressive scan output 480p or 1080i 2 Fh Connect the equipment to the AV4 IN jacks on the TV See AV3 or AV4 Digital HD input next page Note The labels for the component video sockets may differ depending on the DVD player Although the abbreviations may vary the letters B and R stand for the blue and red component signals respectively and Y indicates the luminance signal Refer to the DVD players instructions for use for definitions and connection details 15 AV3 AV4 Digital High Definition input Connect the equipment with 2 Fh RGB output to O ER the RGB Y Pb and Pr jacks and to the L and R uve 0 AUDIO AUDIO jacks of AV3 0 Connect the equipment with 2Fh YPbPr output to A g gt a the Y Pb and Pr jacks and to the L and R AUDIO r o r o jacks of AV4 See also the manual of your High Abopr cal Definition equipment AV4 AV3 IN IN Note This television is designed to accept high definition signal standards 1080i and 480p as specified by the Electronic Industries Association standard ElA770 3 Digital devices from different manufacturers has the possibility of differing output standards which may cause difficulties for the television to properly display When you have a digital equipment with a 480p or 1080i o
18. h the 3 key on the remote control See p 3 Features menu Features TV Channel list Subtitle Sleeptimer Lock Child lock Custom lock Channel lock On timer Unlock O Press the cursor right to select Features Select the menu items with the cursor up down and adjust the settings with the cursor left right Use the on screen Menu Info for more information about the menu items Channel list Press the OK key to switch over to the selected TV channel or external Select subtitles The subtitle page must be stored for each TV channel Switch on teletext and select the proper subtitle page from the index Switch off teletext Subtitle On will automatically display them on the selected TV channels if subtitles are in the transmission A symbol will indicate that the mode is on Select On during mute when you want to have the subtitles automatically displayed only when the sound has been muted with the KK key on the remote control 10 Child lock O Select Child lock Press the cursor right to enter the Child lock menu You re summoned to enter your code Note You have to re enter your code each time you enter the child lock menu Important You have forgotten your code e Select Cancel with the cursor down e Select Set Change code in the Setup menu See General menu Set Change code p 8 e Press OK e Press the cursor right and enter the overriding code 8 8 8 8 e Press the cursor ag
19. he VIDEO AUDIO L and R input of AV2 IN jacks cr Note in case of mono equipment only the left Lom 2 o a loudspeaker reproduces sound Use a mono to Ey Be stereo adaptor not supplied for sound reproduction via all internal loudspeakers When a video recorder is not connected to MONITOR OUT you can only record a programme from the aerial or from the cable system Satellite Receiver O Connect the satellite antenna cable 1 to the Moor A1 in satellite receiver SATELLITE IN jack EPA al Connect the Video Audio left and right only for End femo stereo equipment AV cables 2 to the VIDEO L gt and R AUDIO input AV2 in jacks cable with the S VIDEO input instead of connecting the satellite receiver to the video jack of AV2 IN If your satellite receiver has an S VHS video jack our For improved picture quality connect an S VHS video TA SAT 14 Satellite Receiver with a recorder O Connect the RF Antenna or Cable TV cable 1 to the RF IN socket of your recorder O Connect another RF cable 2 from the output of your recorder to the TV s 75 Q IP jack Connect the satellite antenna cable to the satellite receiver s SATELLITE IN jack O Connect the AV cables 4 to the satellite receiver s AV OUT jacks and to the VCR s AV IN jacks O Connect the recorder s AV OU
20. he cord Switch the TV on Press the power switch D on the front of your TV A green indicator on the front of the TV lights up and the screen comes on If the indicator is red press the P keys on the remote control The green lamp blinks every time you press a key on the remote control When you switch on your set for the first time the menu Language automatically appears on the screen The explanation appears in different languages one at a time Choose your own language and press the OK key on the remote control Should your remote be lost or broken you can still change some of the basic settings with the keys on top of your TV Press e the lt 1 or key to adjust the volume e the CH and key to browse through the TV channels or sources stored and to select them e the M key to summon the main menu Use e the lt 1 and keys to select the menu items in the horizontal axis e the CH and keys to select submenu items in the vertical axis Note Sometimes not all the menu items are visible on the screen Press the CH key to reveal all items Exit lets you dismiss the menu Select Exit and press the M key Use of the remote control RC4301 Note For most keys pressing a key once will activate the function Pressing a second time will de activate it When a key enables multiple options a small list will be shown Press repeatedly to select the next item in the list The list will be removed a
21. lete the puck navigates to Install again The channel list is automatically filled with all the channel numbers of the TV channels transmitted Note Channel numbers and names will always be written in Latin characters even when a language has been selected which uses other characters Manual installation Searching for and storing TV channels is done channel by channel You must go through every step of the Manual Manual install Installation menu Install O Select Manual install in the Install menu System Channel Press the cursor down S Follow the instructions on screen earc Fine tune Note Search or direct selection of a TV channel Store If you know the frequency the C or S channel number enter the 3 or 2 digits of the frequency or the channel number directly with the digit keys O to 9 e g 048 Repeat to search for another TV channel after you have stored the selected TV channel Give name Give name Install O Select Give Name in the Install menu and Space Delete press the cursor down BBC1 Q 98 ABCDEFG 123 Select the channel number BBC2 HIJKLMN 456 Note keep the cursor up down pressed to scroll CNN OPQRSTU 789 through the channel list quickly TVE VWXYZ 0 Press the cursor right e A keyboard appears on the screen Shift Special Press the cursor right to enter the keyboard Press the cursor up down left right to select the first character and press OK Repeat for every character you w
22. list will be removed To remove a channel or source select the channel number you want to remove Press the P P key Press the cursor right to remove Press the OK key or wait for the time out to dismiss the Smart surf display Ep Picture format Press this key repeatedly to select another picture format Auto format 4 3 or Vertical squeeze Auto format makes the picture fill the screen as much as possible Vertical squeeze squeezes the picture to a wide screen picture format To use the memas J O Press the MENU key on the remote control to summon the main menu At any moment you can exit the menu by FN pressing the MENU key again Note Should your remote control be lost or broken you can still FE use the keys on top of the TV See p 2 Picture Sound Features TV Setup Demo cursor to select a 50 Install OK key to Use the cursor in the up down direction to select the TV activate Setup Demo or Install menu Use the cursor left right to select Picture Sound or a return or switch Features main menu on off Note Sometimes not all the menu items are visible on the screen G indicated by a cluster of blue balls Use the cursor down or right to reveal all items Press the key to get Use the cursor in the left right direction to select the menu information about the selected item menu item Use the cursor up down again to select the control you want to select or to adjust Note Items
23. nt Recorder vcr dvd rw Side connections To select connected equipment Video equipment keys Record with your recorder Before calling service A ae Preparation O Place the TV on a solid surface For ventilation leave at least 5 cm free all around the TV dv vv DO vv ud vv v La Do not place the TV on a carpet To prevent any unsafe situations do not place any objects on top of the TV Avoid heat direct sunlight and exposure to rain or water Keep mobile telephones at a safe distance to avoid disturbances in picture and sound Insert the aerial plug firmly into the aerial socket I at the back of the TV For best picture quality use the suppressor aerial cable supplied Remote control Remove the cover of the battery compartment Insert the 2 batteries supplied Type R6 1 5V The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many countries exhausted batteries may not be disposed of with your household waste Keys on top of the TV O O O aO Please check on how to dispose of exhausted batteries according to local regulations Note this remote control functions with TVs and other equipment which use the RC6 signalling standard Insert the mains plug of the TV in the wall socket having a mains voltage of 220V 240V To prevent damaging the mains AC cord which could cause a fire or electric shock do not place the TV on t
24. o demo has been selected the demo will automatically present all the features sequentially in a loop Press one of the cursor keys to stop the Auto demo If one of the features has been selected this particular feature demo will run one time only until activated again and the Demo menu will reappear Select Dealer Demo Select Digital processing Light sensor and 3D Y C Comb filter On or Off to really see the difference in picture quality In Dealer Demo mode it is possible to change channels with P and to adjust the volume Note the Dealer Demo is not part of the automatic sequence and can only be activated separately Gym Press the MENU key on the remote control to summon the main menu Press the key on the remote control to get information about the selected menu item Picture Smart picture Contrast Brightness Colour Sharpness Tint Digital options Dynamic contrast DNR Colour enhancement Hue Picture format O Press the cursor right to select Picture Select the menu items in the Picture menu with the cursor up down Adjust the settings with the cursor left right or enter the list of submenu items with the cursor right Select a submenu item with the cursor up down Note To remove the menu background before adjusting the picture settings see Select TV setup General p 9 Smart picture Select Smart picture to display a list of predefined picture settings each corresponding with s
25. ording to local regulations Csa C s S S S S S SCS Active Control Measures and corrects incoming signals in order to provide the best picture quality settings AVL Automatically controls the volume level to avoid too large level differences especially during commercial breaks Display An on screen message or graphics that help the user operate and adjust TV feature controls See On Screen Displays OSD DNR Digital Noise Reduction By encoding signals digitally in 100 Hz sets it is possible to clean up picture noise This is especially beneficial in poor signal areas and when viewing poor quality video tapes Hue TV function to modify the general colour balance between cool and warm and to adjust it according to your personal preference Menu An on screen listing of feature controls shown on the TV screen that are made available for user adjustments 20 Picture Freeze TV mode which allows you to freeze a certain image in order to study a specific detail at ease e g to make notes of certain programme information like phone numbers Programming The procedure of adding or deleting channel numbers into the TV s memory circuits In this way the TV remembers only the locally available or desired channel numbers and skips over any unwanted channel numbers Specifications Y lt lt lt SSSS 29PT9221 Picture tube size
26. pecific factory settings Personal refers to the personal preference settings of picture in the picture menu Note This Philips TV has been set at the factory to look best in bright store environments which use fluorescent lighting As your home will likely not be as well lit as a store we recommend that you cycle through the various Smart Picture modes to find the one that best suits your own viewing conditions Most consumers will find that Natural is the correct choice In case of weak RF AV signals please select Soft Digital options Pixel Plus 2 is the most ideal setting doubles the horizontal resolution and increases the number of lines by 33 You may consider to select Movie Plus in case a halo effect should disturb you Dependent on your own preference select 100 Hz Dig Scan 100 Hz Dig Scan 100 Hz Dig Scan Field and line flicker reduction without motion compensation O e Pixel Plus 2 creates near High Definition performance inside the Tv on the basis of a regular input signal The number of lines are increased and the number of pixels on a line are doubled in combination with Digital Natural Motion As such Pixel Plus 2 enhances both regular broadcast signals and DVD or Digital Tv input towards unparalleled sharpness and depth near High Definition and natural detail Notes Pixel Plus 2 is not active when Teletext except when subtitling is activated is selected When having selected Pixel Plus
27. recorder from the TV tuner via MONITOR OUT O Switch on the equipment Select the correct channel on your TV and the correct input on your recorder Set your recorder to record You record the tuner channel of the TV or the selected device AV1 or AV2 Via AV3 or AV4 you record the tuner channel Do not switch channels or switch off your TV when you are recording through MONITOR OUT 18 Before Calling Service Calling Service Please make these simple checks before calling service These tips may save you time and money since charges for television installation and adjustments of customer controls are not covered under your warranty Symptoms Items to Check and Actions to follow Ghost or double images e This may be caused by obstruction to the antenna due to high rise buildings or hills Using a highly directional antenna may improve the picture No power e Check that the television s AC power cord is plugged into the mains socket e Unplug the television wait for 60 seconds then re insert plug into the mains socket and switch on the television again No picture e Check antenna connections at the rear of the television to see if it properly connected to the television input terminal Is it properly secured to the appropriate antenna plug on the TV e Possible broadcast station trouble Try another channel Try running the Automatic installation e Adjust the contrast and brightness settings
28. tch between undercast or capital characters Special to display special characters on the keyboard O Press the cursor left repeatedly to return to the Teletext menu again Searching a word O Type in the word on screen or select a word from the history list on the right and press OK Select Accept and press OK again The message Searching appears When the word is found it is highlighted in the teletext page To continue the search press the OK key twice When a word is not found a message appears To search for a new word select Keyboard and press OK Select the new word Reveal Reveals conceals hidden information on a page such as solutions to riddles and puzzles Press the OK key to activate Press OK again to return to the Teletext menu Cycle subpages Makes the subpages cycle automatically Press the OK key to activate and to de activate again Window text A limited amount of text is displayed at the bottom of the screen Press the OK key to activate Use the cursor up down to scroll and press the cursor left to go back to the teletext menu Timed page To display a specific page at a certain time Press the cursor right to select Yes or No Enter the time and pagenumber with the cursor keys or the digit keys Note Teletext does not have to remain switched on It is not possible to display a timed page when the TV is switched to standby Press the MENU key to leave the Teletext menu
29. the television immediately and consult a qualified service personnel Television not responding to remote control e Check whether the batteries are working Replace if necessary e Clean the remote control sensor lens on the television e Operating range between television and remote control should not be gt 240 e You can still use the M key and the keys at the top of the TV e Press the key to be sure your remote control is in the TV mode If your problem is not solved Turn your TV off and then on again Never attempt to repair a defective TV yourself Check with your dealer or call a TV technician 19 Gay Care of the screen Clean the TV with a slightly damp soft cloth Do not use abrasive solvent as it can damage the TV screen End of life directives We are paying a lot of attention to using environmentally friendly production methods Your new TV contains materials which can be recycled and reused At the end of its life specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials that must be disposed Please ensure that you dispose of your old TV according to local regulations How to dispose of batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries acc
30. utomatically after 6 seconds or press OK to remove immediately a VCR DVD SAT AMP CD Select peripherals N See Video equipment keys p 17 See p 17 0 lt HE gt gt gt Time display e e 2 Surround mode Se Incredible surround Virtual Dolby surround feel no function no function OK Press this key bl lt Freeze Video equipment keys see p 17 The time is displayed on the screen With stereo transmission and when Incredible surround is selected it seems as though the loudspeakers are spread further apart from one another Optimal with Dolby surround signals Enables you to experience the effect of Dolby surround Pro Logic reproducing a rear sound effect See Sound menu 3D effect p 10 Note You can make the same selection in the Sound menu surround mode p 10 to activate your choice when in the menus to display the channel list To activate de activate the frozen picture and to hold a teletext page see p 12 of VCR DVD SAT AMP CD gt 000 0000 OOOO Active Control a Standby Press to switch the TV on or off When switched off a red indicator on the TV lights up a O Pixel Plus 2 demo on off In the right part of the screen Pixel Plus 2 and Digital Natural Motion are switched on N Teletext On Off see p 11 MENU Main menu on off see p 5 A To adjust the volume
31. utput e g a digital Set Top Box or Progressive DVD player connect it to the AV3 or AV4 IN VIDEO 2 Fh 480p 1080i input Warning in case you notice scrolling images wrong colours or no colour no picture or even combinations of these on your screen check if the connections are done in the right way The AV3 input can not be used to connect a computer or any other VGA device Side connections Camera or camcorder Connect your camera or camcorder to sockets at the right side of your TV Connect the equipment to VIDEO 2 and AUDIO L j N camcorder is obtained by connecting the S Video cables with the S VIDEO input 1 instead of VIDEO 2 and AUDIO inputs G s VIDEO VIDEO A QG for mono equipment For stereo equipment also connect AUDIO R G S Video quality with an S VHS Hi 8 or Digital Note If you prefer you can also connect the camcorder to one of the TV s rear AV IN jacks Headphone O Insert the plug into the headphone socket f at the right side of the TV Press K on the remote control to switch off the internal loudspeakers of the TV The headphone impedance must be between 8 and 4000 Ohm The headphone socket has a 3 5 mm jack In the Sound menu select Headphone volume to adjust the headphone volume 16 To select connected equipment Equipment connected to the rear or on the right side of the TV O Press the key to select AV1 AV2 AV3 AV4 or Side according to where you
32. y the main index usually p 100 Select subpages When a selected teletext page consists of different subpages one of the subpages appears on the screen Press the cursor right to highlight the subpagenumber Press the cursor up down to select the next or previous subpage or enter the subpagenumber with the digit keys Special teletext functions Hold Press I4 to stop the automatically rotating of the subpages or to stop the page counter from seeking when you have entered a wrong page number or when the page is not available Enter another page number 12 Hypertext With hypertext you can select and search for pages containing any word or number on the current teletext page O Make sure you are not in the teletext menu and that the puck is in the upper left corner of the screen Press the cursor key down to highlight the first word or a number on the page Use the cursor up down left right to select the word or number you want to search for O Press the OK key to confirm A message appears at the bottom of the screen to indicate that the searching is going on or that the word or page is not found Select Continuous Subtitles TV channels with teletext often transmit programmes with subtitling For each TV channel you can store a subtitle page Switch on teletext and select the proper subtitle page from the index Switch off teletext Now the subtitle page is stored for the selected TV channel Select
Download Pdf Manuals
Related Search