Canon HF20 A Camcorder User Manual
Contents
1. VCR 2 VCR 1 VCR equipped with Video and Audio input sockets Connect the sockets of the VCR which you wish to record from to the corresponding sockets at either AV1 or AV2 Connect the sockets of the receiving VCR to tte MONITOR OUTPUT sockets on the rear of the TV 9 FUNCTIONS OF REMOTE CONTROL ap Power button O O 0 8 Switch set off temporarily to standby mode The red light indicator lights up when the set is on standby mode To switch on set from standby mode press Channel Digit 0 9 or Power button Teletext Colour Personal Zapping buttons In teletext mode the colour buttons allow you to access directly an item or corresponding pages As Personal Zapping buttons you can surf up to 10 personal channels for each button For detailed description of functions refer to section on Personal Zapping Teletext buttons Allows you to access teletext information For detailed description of functions refer to section on Using the Teletext Smiley button Allows to add and store your personal preference channels in your Personal Preference list For detailed description of functions refer to section on Using your Personal Zapping feature Timer Button Not applicable Smart Sound Button Press the Smart Sound button repeatedly to access 4 different types of sound settings and choose your desired setting Menu Button Displays the ma2. Press the button once to enlarge and view the top half of the page Press the button the second time to enlarge and view the bottom half of the page Press the button the third time to return to normal size page A selected page sometimes contains a few sub pages The sub page will automatically move to the next sub page after about 20 seconds The total number of sub pages are indicated at the top right hand corner of the screen Press the button once to hold page and the second time to release holding of page Press the button once to reveal hidden information solutions to puzzles riddles etc Press the button the second time to conceal information This button is applicable only to teletext page with puzzles riddles etc Specification PICTURE e Picture screen diameter 720 mm e Visible screen size 680 mm e Active Control Plus e Contrast e Colour Transient Improver CTI e Colour Temperature Control e Luminance Transient Improver LTI e Noise Reduction e Scan Velocity Modulation e Signal Strength Indicator e 2D Combfilter Sound Sound output 2 x 10 W e Loudspeakers Full range e Smart Sound 4 Modes e incredible Surrround Connectors e Side Stereo headphone out 3 5 mm Stereo Audio Video input e Rear Stereo Audio Video input x 2 Stereo Audio Video output x 1 Component Video Input S Video input Reception Tuning system PLL digital tuning Tuner UV S and Hyperband P
3. Personal Picture settings are set to your preference DVD VCD For optimal picture setting whenever the source is connected to DVD VCD player select DVD VCD setting for AV mode Rich Emphasize very vibrant colours This setting is the optimal setting when you are viewing TV programmes in a brightly lit room Natural Emphasize original colours Soft Emphasize warm colours Suitable for dimly lit room condition and gives cinema like effect when light is switched off 26 SMART SOUND CONTROL Whether you are watching a movie or video game your TV has automatic sound control settings matched to your current program source or content The Smart Sound feature quickly resets your TV s sound controls of program for a number of different types of pro grams and viewing conditions you may have in your home Each Smart Sound setting is preset at the factory to automatically adjust the TV s Treble and Bass levels Step Press button Press botton repeatedly to cycle through the 4 settings namely lt gt Ca Personal Theatre Music and Voice and select your desired sound setting Exit menu from screen Personal Sound settings are set to your preference Theatre Emphasize sensation to action Bass and Treble boosted Theatre Music Emphasize low tone Bass boosted om Voice Emphasize high tone treble boosted Voice 27 PERSONAL ZAPPING A list or series of favourite TV pro
4. CS Install Enter the Install menu v Language lt English Auto Store Manual Store Sort Channel Edit gt Select Auto Store Language r AutoStore gt Manual Store Channel Edit Name gt Start automatic tuning of channels a Channel TV 142M EAA AAAAAAADAAAL AAADAAAARAAAADAADAAL Install Language Auto Store Manual Store Sort When tuning is completed Channel Edit Name exit menu from screen 14 MANUAL TUNNING OF CHANNELS Manual tuning of channels allows you to select your preferred channel number for every available programme Step Press button Enter main menu Press button repeatedly until Install is selected Enter the Install menu Press button repeatedly until Manual Store is selected Enter manual store menu Press button repeatedly until Search is selected 15 Result on screen v Picture gt Brightness Sound Colour a Features Contrast Install Sharpness Colour Temp More Picture Language a Sound Auto Store Features Manual Store v Install gt Channel Edit Install A v language English a Auto Store Manual Store a Channel Edit Install A Language Colour System Auto Store Sound System v_ Manual Store B Search Channel Edit Channel Fine Tune Store Manual Store A a Colour System Sound System Search Le 7 Mlake gt Channel Fine Tune Store a v a a a MANUAL TUNNING O
5. If there is still no power disconnect plug Wait for 60 seconds and re insert plug Switch onthe TV again No picture e Check the antenna connection at the rear of the TV e Possible TV station problem Try another channel Good picture e Try increasing the volume but no sound e Check that the sound is not muted If it is muted press the Mute button on the remote control to restore sound Good sound but poor e Try increasing the contrast and brightness setting colour or no picture Snowish picture and e Check antenna connection at the rear of the TV noise Horizontal dotted lines e Possible electrical interference e g hairdryer vacuum cleaner etc Switch off appliances Double images or e Possible poor positioning of antenna Using a highly Ghost images directional antenna may improve reception TV not responding to e Check life span of batteries of remote control hanset remote control handset e Aim remote control handset directly at remote control sensor lens on the TV HOOKING UP YOUR TV BASIC CONNECTION Antenna Connection Connect the aerial plug to the antenna socket on the backcover Insert the main plug into the wall socket Mains Connection For correct mains voltage refer to type sticker at the rear of the TV set Consult your dealer if mains supply is different Note This diagram is not representative of the actual plug and socket Switching on the Set Press the main
6. contrast for improved picture quality 20 ADJUSTING THE TV SOUND The sound menu allows you to make adjustments to the sound Step Q OY Press button Result on screen Display the main menu on v Picture El Brightness Sound Colour screen Features Contrast Install Sharpness Colour Temp More SSE eS Picture Treble Select Sound menu V Sound BJ Bass Features Balance Install AVL Incr Surround Ultra Bass SS SSF Enter Sound menu Treble PT P gt Bass AVL Incr Surroung Select item Ultra Bass Adjust level or select desired setting Exit menu from screen Activities Treble Increase or decrease high frequency level Bas Increase or decrease low frequency level Balance Increase or decrease to adjust balance level AVL Auto Volume Leveller Select On to enable volume to remain at a prea predetermined level should there be a sudden change in volume during commer cial breaks or channel switching Incredible Surround Select On to boost the effect of stereo sound Ultra Bass Select On to enjoy enhanced bass output 21 ROTATION Due to the earth s magnetic field and position of the TV there may be a slight tilting of the picture to the left or right when the set is switched on When this phenomena accura select Rotation in the Features menu and adjust accordingly Step Press button Result on screen Display the main menu on screen v P
7. descending order Mute Button Mutes sound To restore sound press button again Teletext Button Refer to section on Using the Teletext OSD button Allows you to display the current channel number It also allows to exit menu from the screen after control adjustments Digit 0 9 Buttons Press to select a channel For a 2 digit channel number press the first digit and followed immediately by the second digit AN Button Allows you to select the AV channels Sleeptimer Button Allows you to select a time period after which the set will switch to standby mode automatically 11 FUNCTIONS OF TV CONTROLS Switch mains power on or off Standby Light indicator Indicate red light when standby mode is activated Remote Sensor Acts as a sensor for activating the controls of the TV when remote control handset is aimed at it o Volume button Adjust sound volume softer Volume lt button Adjust sound volume louder Programme 0 button Select channel in ascending order D Programme button Select channel in descending order Note e You can enter the main menu by pressing both the Volume and buttons at the same time e Press the Programme Q or Q button to select the next item on the menu e Press the Volume 0 XS button to access the sub menus and adjust the settings SELECTING THE MENU LANGUAGE Operating instructions generally explains the operation of the TV set using the buttons on the remo
8. PHILIPS POWER eo Press button On Off teletext and Superimpose teletext page over TV programme Selecting a teletext page D00 0000 ooo Accessing a teletext page O Direct Access to an item or corresponding pages Main Index 29 Result on screen Press the button once to switch on teletext display A channel in which teletext is being transmitted must be selected Press the button the second time superimpose the teletext page over the TV programme Press the button the third time to exit teletext mode Key in the required teletext page 3 digits The page number is displayed at the top left hand corner of the screen When the teletext page is located the counter stops searching If the counter keeps searching it means that the page is not available for selection If you make a mistake in keying the page number you have to complete keying the 3 digit number before re keying the correct page number Press the button to display the next page and the button to display the previous page The 4 colour button allows you to access directly an item or corresponding pages Press the button to return to the main index page USING THE TELETEXT PHILIPS Press button Interrupt Enlarge Reveal Conceal 30 Result on screen Press the button to change to TV mode Press the button again to return to teletext mode and to the teletext page
9. Sound Auto Store a Features Manual Store v Install Channel edit Install A a Language Colour System a Auto Store Sound System v Manual Store gt Search a Channel Edit Channel Fine Tune Store MEMUFIIN OI A Colour System Sound System Search Channel Fine Tune lt tt gt Store Manual Store Colour System Sound System Search Channel wv Fine Tune Store lt i Manual Store A a Colour System Sound System Search Channel Fine Tune Store Stored EDITING OF CHANNELS This feature allows you to skip or edit channels which have bad or weak TV signal or channels that you do not watch often Note Once a channel is skipped you cannot have access to it by the CH Channel or button You can only have access to the channel by the Digit 0 9 button Step Press button Result on screen Enter main menu Picture Language Sound Auto Store a Features Manual Store v Install Channel Edit Press button repeatedly until Install is selected Install A a Language Channel Enter install menu a Auta Store Skipped a Manual Store Channel Edit Press button repeatedly until 960 60 Channel Edit is selected a Enter Channel Edit menu v Channel j 2 gt Skipped Key inthe channel number to be skipped 0o00 SSS Select Skipped Channel v Skipped On Fj Select On to skip channel O 9 09
10. 2 O Q 6 OT Exit menu from screen HOW TO RESTORE SKIPPED CHANNELS e Repeat Steps 1 to 5 as in Editing of Channels e Key in the channel number to be restored by the Channel v Skipped Off Digit 0 9 button Select Skipped by the button e Select Off to restore channel by the button Exit menu from screen by the button 19 ADJUSTING THE TV PICTURE The picture menu allows you to make adjustments to the picture Step Press button Result on screen Displav th Spy Me Man MENU on Picture BP Brightness screen Sound Colour Features Contrast Install Sharpness Colour Temp More ee ee a r e Picture Enter Picture menu v Brightness lt mmmmnummni 59 P Colour Contrast A Sharpness or Select item Colour Temp NR i Colour aqin 59 p gt Contrast or Adjust level or select desired Toe setting Colour Temp NR Contrast Exit menu from screen 0 00 Picture menu items Activities Brightness Increase or decrease brightness level Increase or decrease color level Contrast Increase or decrease contrast level Sharpness Increase or decrease sharpness level to improve detail in picture Colour temperature Choose from 3 settings Normal Warm or Cool NR Noise Reduction Select On to reduce noisy picture little dots on picture due to weak signal Contrast Select On to allow you to optimise the total y P
11. Colour Television 29PT3425 User manual PHILIPS IMPORTANT Before you begin Make sure your package includes the following items TV and mains cord remote control User manual Antenna cable and Coaxial cable are optional items depending on the model Attention 1 Read your manual first your Philips TV comes with a well designed remote control and onscreen display to ensure your TV is easy to operate The tips provided in this manual will save you time and money as charges for TV installation and adjustments of customer controls are not covered under the warranty For information outside of this manual such as sales locations and other Philips products please visit www philips com which will automatically link you to your local Philips website Please refer to the Troubleshooting Tips on page 5 before calling for service In case of a need to call for service we recommend you to call from your room where your TV is located and have on hand your remote control warranty card TV model and serial number Do not discard packaging materials e without thorough inspection for parts and accessories that may be packed separately inside the carton during the warranty period should you need to exchange the set Disclaimer Graphics in this manual are for illustration purpose and may not represent the actual product TABLE OF CONTENTS Introduction Safety Information Useful Tips Before Calling Servic
12. F CHANNELS Step Press button Result on screen Q Start manual searching Searching AIER N stops once a transmitting signal is Colour System Sound System found v Search 128MHz p gt a Channel Fine Tune Store D Colour System Sound System Key in the channel number Search Channel Fine Tune Store Select Channel S Press button repeatedly until a Colour System Store is selected Sound System Search Channel Fine Tune Store Store gt Oy gt Store tuned channel a Note if you want to continue Sound System searching for another transmitting Search channel repeat steps 7 to 11 Channel Fine Tune Store Stored Manual Store a Colour System Exit menu from screen 16 SELECTING THE COLOUR SOUND SYSTEM This feature allows you to select your desired Colour and Sound system If Auto is selected the respective colour and sound system will be automatically selected according to the transmission system Note Select your desired colour and sound system manually if reception is poor at Auto mode Step Press button Repeat step 1 to step 5 as in Manual Tuning of TV Channels O O O ay O Colour System is selected Select the desired colour system Auto PAL NTSC 3 58 NTSC 4 43 or SECAM Press button repeatedly until STORE is selected Store selected system Proceed to select Sound System Select t
13. al Multisystem Channel Selection 100 presets Aerial input 75 ohm coaxial TV System NTSC 3 58 4 5 Pal B G B H Pal D K Pal Video playback NTSC 4 43 3 58 Stereo System 2CS BG 2CS D K FM FM 5 5 5 74 B G FM FM 6 5 6 74 China NICAM B G 5 5 5 85 NICAM D K 6 5 5 85 Hung NICAM I 6 0 6 52 Ease of use Multi language on screen display Personal Zapping Alternate channel Auto Standby Demo Mode Manual Skip Size and weight Set dimensions Length 787mm Width 500 mm Height 590 mm Net weight 45 kg Note Specification is subject to change without notice 31 PHILIPS Be responsible Respect copyrights Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 200Y Koninklijke Philips Electronics N V All rights reserved www philips com 3139 125 35171 32
14. ather or soft cloth there is a lightning storm the set is left unattended for a prolonged period of time No naked flame sources such as lighted candles should be placed on top of the TV or in the vicinity Do not place your TV set under direct sunlight or heat Leave at least 5 cm around each side of TV set to allow for proper ventilation Avoid placing your set e g near the window where it is likely to be exposed to rain or water No objects filled with liquids should be placed on top the TV so as to avoid dripping or splashing of liquids on the set Useful Tips Do not leave your set on standby mode for a prolonged period of time Switch off set to allow it to be demagnetised A demagnetised set supports good picture quality Do not shift or move the set around when it is switched on Uneveness in colour in some parts of the screen may occur Never attempt to repair a defective TV yourself Always consult a skilled service personnel BEFORE CALLING SERVICE Below is a list of frequently occurred symptoms Before you call for service make these simple checks Some of these symptoms can easily be rectified if you know what to do Symptom What you should do Colour patch e Switch off the TV by the mains power button Wait uneveness for 20 minutes before switching on again e Check the TV is not placed too near speakers or mag netic objects No power e Check the TV s AC power cord is plugged into the mains socket
15. e Basic Installation Functions Hooking Up Your TV Basic Connection Use Care of Remote Control Connecting the Audio Video Sockets Playback Connecting the Audio Video Sockets Recording Functions of Remote Control Functions of TV Controls TV Installation Selecting the Menu Language Automatic Tuning of Channels Manual Tuning of Channels Selecting the Colour Sound System Fine Tuning of Channels Editing of Channels Adjusting the TV Picture Adjusting the TV Sound Rotation for certain versions only Using the Screen Format Activating the Signal Strength Using the Active Control Smart Picture Control Smart Sound Control Personal Zapping Using the Teletext Specifications Recycling Directive To minimise harm to the environment the batteries supplied with the TV set do not contain mercury or nickel cadmium If possible when disposing of batteries use recycling means available to you Your TV set uses materials which are reusable or which can be recycled To minimise the amount of waste in the envi ronment specialist companies recover used sets for dismantling and collection of reusable materials contact your dealer SAFETY INFORMATION AND USEFUL TIPS Safety Information Disconnect mains plug when the red light below the TV screen is flashing continuously a bright white line is displayed across the screen cleaning the TV screen Never use abrasive cleaning agents Use a slight damp chamois le
16. grams can be selected and stored in the 4 coloured buttons with the Personal Zapping feature With this feature you can easily viewed up to a total of 10 preferred channels for each coloured button Adding Channels to the Favourite list Step Press button Result on screen Select a channel by the Digit buttons Press button to display list 8 Select Lis O Choose your favourite colour button to store selected channel Gye Added Repeat steps 1 to 3 to add and store your avourite channels to the list lt gt E Exit menu from screen To view through the favourite list Press the colour button that you Q have selected Press button repeatedly to cycle Q gt O through your favourite list and view your favourite channel Deleting Channels from the Favourite list O Select a colour button and press button repeatedly to select the channel you want to delete i 8 Remove Item P Press button to display list 8 Remove ltem Press Press button to remove item Repeat steps 1 to 3 to delete more channels from list OO Exit menu from screen 28 USING THE TELETEXT Ifa TV channel broadcast contains teletext information each channel that broadcasts teletext transmits a page index page with information on how to use the teletext system usually on page 100 The system transmitted is indicated in the option line at the bottom of the screen
17. he desired sound system Auto BG I DK or M Press button repeatedly until STORE is selected Store selected system Exit menu from screen 17 Result on screen MEETS ETERN a A Colour System Auto gt v a Search Sound System Search Channel Fine Tune Store Colour System PAL Sound System Search Channel Fine Tune Store Manual Store Colour System Sound System Search Channel Fine Tune Store Stored Manual Store Colour System Sound System u gt Channel Fine Tune Store Manual Store A Colour System Search Channel Fine Tune Store v Sound System DK gt Manua Store Colour System Sound System Search Channel Fine Tune Store Stored FINE TUNING OF CHANNELS This feature allows you to adjust picture reception in areas of weak reception Step Q 6 Y Q O Q GR 0 O 00 6 Press button Enter main menu Press button repeatedly until Install is selected Enter install menu Press button repeatedly until Manual Store is selected Enter manual store menu Press button repeatedly until Fine Tune is selected Fine tune until the best reception is obtained Select Store Store last fine tuned status Exit menu from screen 18 Result on screen v Picture B Brightness Sound Colour Features Contrast Install Sharpness Colour Temp More a Picture Language
18. icture gt Brightness Sound Colour Features Contrast Install Sharpness Colour Temp More lt gt Select Features Picture Rotation Sound Format Features amp Signal Strength Install Active Control Enter the Features menu Select Rotation rare A wv Rotation arnim 0 P gt Format Signal strength a Active Control gt Press repeatedly until you deem v Rotation aqu mmmlm 4 Op or picture is in the normal position Format Signal strength Active Control Exit menu from screen 22 USING THE SCREEN FORMAT You can have a choice of two formats for your viewing pleasure namely 4 3 mode and the EXPAND 4 3 mode through the FORMAT menu Step 88 OO Press button Display the main menu on screen Press button repeatedly until Features is selected Enter the Features menu Press button repeatedly until Format is selected Press the button repeatedly to cycle through the different formats 4 3 or Expand 4 3 or and select your desired format Exit menu from screen When to use the Screen Formats 4 3 format Select the 4 3 format if you want to display the 4 3 picture using the full surface of the screen Expand 4 3 format Select the Expand 4 3 format if you want to expand movie images recorded in the letterbox format When this format is selected the black horizontal bars at the top and bottom are expanded thus filling up the en
19. in menu Also exits menu from screen Cursor Up Button Allows you to select the next item on the menu Cursor Left Button Allows you to select the sub menus and adjust the settings Volume Button Increases or decreases volume I II Allows you to switch from Stereo to Mono sound during stereo transmission or to choose between language I or language II during dual sound transmission A CH Alternate channel Button Allows you to change between the current channel and the previous channel PHILIPS 10 FUNCTIONS OF REMOTE CONTROL POWER PHILIPS 000 8 e98e a eo O 00 89 Main Index Button In teletext mode press button to return to the main index page Frownie button Allows to delete stored personal preference channels in your Personal Preference list For detailed description of functions refer to section on Personal Zapping Smart Picture Button Press the Smart Picture button repeatedly to access 5 different types of picture settings and choose your desired setting Incredible Surround Button Allows you to select Incredible Surround sound when transmission is in stereo mode Allows you to select Spatial Sound when transmission is in mono mode Cursor Right Button Allows you to access the sub menus and adjust the settings Cursor Down Button Allows you to select the next item on the menu Channel Buttons Allows you to select channels in ascending or
20. k of DVD DVD Equipped with Y Pb and Pr and Output sockets You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT sockets on the rear of the TV Connect the Y Pb and the Pr INPUT sockets on the TV to the Y Pb and Pr OUTPUT sockets on the DVD to view playback of DVD discs CONNECTING THE AUDIO VIDEO SOCKETS PLAYBACK Camcorder Connect headphone jack to socket for personal listening For more convenient direct playback connections the Side Audio Video Input sockets allow for quick and easy connections particularly Camcorder tape recordings Connect the VIDEO socket from the Camcorder to the Side VIDEO in socket of the TV Connect the AUDIO OUT sockets Right and Left from the Camcorder to the Side AUDIO IN sockets CONNECTING THE AUDIO VIDEO SOCKETS RECORDING Connection for recording from the TV channel AV sockets on the rear of TV o ee VCR equipped with Video and Audio input sockets Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUT sockets on the rear of the TV To enhance the sound of your TV connect the AUDIO L and R sockets to an external audio system instead of the VCR For mono equipment connect only the AUDIO L socket Connection for recording from one VCR to another VCR AV sockets on the rear of TV Back of VCR oC NM C
21. power button to switch on off the TV If the set is on standby indicator is red press the Power button on the remote control to switch on set USE CARE OF REMOTE CONTROL Insert the correct type of batteries into the compartment Ensure the batteries are placed in the right direction CONNECTING THE AUDIO VIDEO SOCKETS PLAYBACK AV sockets on the rear of TV Back of VCR i VCR equipped with Video and Audio output sockets You can view the playback of VCR tapes Video Disc players camcorders etc by using the AUDIO and VIDEO INPUT sockets on the rear of the TV Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and VIDEO OUT sockets on the VCR AV sockets on the rear of TV Back of S VHS VCR The S Video connection on the rear of the TV is used for the playback of S VHS VCR tapes Video Discs Video Games or Compact Disc Interactive cd i discs Better picture detail and clarity is possible with the S Video playback as compared to the picture from a normal antenna RF connection Connect the S VIDEO socket on the rear of the TV to the S VHS OUT socket ona S VHS VCR Connect the AUDIO IN sockets from the rear of the TV to the AUDIO OUT sockets on the VCR Note You need not connect the VIDEO IN socket of the TV if S VIDEO IN socket is connected CONNECTING THE AUDIO VIDEO SOCKETS PLAYBACK AV sockets on rear of TV Bac
22. s button Result on screen Picture Rotation Sound Format Press button repeatedly until ees Signal Strength Install Active Control Features is selected Display the main menu on screen Enter the Features menu Features A Rotation Press the button repeatedly until Format Vv Active control is selected Signal strength on v Active Control OO OO Press the button to select On SS a option to activate Active Control mode If Display On option is selected the settings of Brightness Contrast Sharpness Contrast and Noise Reduction will be displayed on the screen when the set is switched on or when you switch to another channel C Features A Rotation Format Signal strength v Active Control 25 SMART PICTURE CONTROL Whether you are watching a movie or video game your TV has automatic video control settings matched to your current program source or content The Smart Picture feature quickly resets your TV s video controls of program for a number of different types of programs and viewing conditions you may have in your home Each Smart Picture setting is preset at the factory to automatically adjust the TV s Brightness Colour Picture and Sharpness levels Step Press button Press button repeatedly to cycle through the 5 settings namely Personal DVD VCD Rich Natural and Soft and select your desired picture setting Exit menu from screen Defintion of Picture Settings
23. te control unless otherwise stated Please read the following instructions carefully and follow the steps as shown to familiarise yourself with the installations and all features available in your set Note When there is no signal input to the TV you may encounter instability of the on screen display In this instance please use the button on your remote control to select an AV channel The Language feature allows you to set the TV s on screen menu to be shown in your desired language Step Press button Result on screen Enter main menu v Picture gt Brightness Sound Colour Features Contrast Install Sharpness Colour Temp More Select Install Picture Language Sound Auto Store a Features Manual Store v Install Channel Edit ee Se v Language gt English gt a Auto Store Manual Store Channel Edit Enter the Install menu Press button repeatedly to cycle through the language list and select the language of you choice Exit menu from screen 13 AUTOMATIC TUNING OF CHANNELS Automatic tuning of channels allows you to store each programme automatically Step Press button Result on screen Enter main menu Picture Brightness Sound Colour Features Contrast Install Sharpness Colour Temp More E SSS P buti d til ress Dutton repea e Y unti Picture Language Install is selected Sound Auto Store Features Manual Store v Install IN Channel Edit Name
24. tire TV screen 23 Result on screen Picture Rotation Sound Format BENE Signal Strength Install Active Control Rotation Signal strength a Active Control Rotation v Format 4 3Expand gt Signal strength a Active Control ACTIVATING THE SIGNAL STRENGTH The Signal Strength feature allows to view the signal strength level when the On option is selected The signal strength level will be indicated at the bottom of the screen whenever you switch channel Step Press button Result on screen Display the main menu on screen E Icture otation Sound Format Features Hp Signal Strength Install Active Control Press button repeatedly until Signal Strength is selected gt Press the button to select On option to activate the Signal Strength mode Rotation a Format v Signal strength Off Active Control Note When signal strength is poor you can proceed to the Active Control feature in the Feature menu and select On option to automatically adjust settings for optimal picture quality Refer to section on Using the Active Control Rotation Format v Signal strength On Active Control 24 USING THE ACTIVE CONTROL This feature automatically adjust settings for optimal picture quality continuously under any signal conditions To activate the Active Control feature select the ON option in the Active Control menu Step Pres
Download Pdf Manuals
Related Search