Axis P7216 Installation guide
Contents
1. Hazard Levels ADANGER Indicates a hazardous situation which if not avoided will result in death or serious injury AWARNING Indicates a hazardous situation which if not avoided could result in death or serious injury ACAUTION Indicates a hazardous situation which if not avoided could result in minor or moderate injury NOTICE Indicates a situation which if not avoided could result in damage to property Other Message Levels Important Indicates significant information which is essential for the product to function correctly Note Indicates useful information which helps in getting the most out of the product AXIS P7216 Video Encoder Safety Instructions e The Axis product shall be used in compliance with local laws and regulations e To use the Axis product outdoors or in similar environments it shall be installed in an approved outdoor housing e Store the Axis product in a dry and ventilated environment e Avoid exposing the Axis product to vibration shocks or heavy pressure e Do not install the product on unstable or vibrating brackets surfaces or walls e Use only applicable tools when installing the Axis product Excessive force could cause damage to the product e Do not use chemicals caustic agents or aerosol cleaners Use a damp cloth for cleaning e Use only accessories that comply with technical specification of the product These can be provided by Axis or a third party e Use only sp2. Implementers Corporation SD SDHC and SDXC are trademarks or registered trademarks of SD 3C LLC in the United States other countries or both Also miniSD microSD miniSDHC microSDHC microSDXC are all trademarks or registered trademarks of SD 3C LLC in the United States other countries or both Support Should you require any technical assistance please contact your Axis reseller If your questions cannot be answered immediately your reseller will forward your queries through the appropriate channels to ensure a rapid response If you are connected to the Internet you can e download user documentation and software updates e find answers to resolved problems in the FAQ database Search by product category or phrase report problems to Axis support staff by logging in to your private support area e chat with Axis support staff selected countries only e visit Axis Support at www axis com techsup Learn More Visit Axis learning center www axis com academy for useful trainings webinars tutorials and guides Regulatory Information Europe C Enis product complies with the applicable CE marking directives and harmonized standards e Electromagnetic Compatibility EMC Directive 2004 108 EC See Electromagnetic Compatibility EMC on page 2 Low Voltage LVD Directive 2006 95 EC See Safety on page 3 e Restrictions of Hazardous Substances RoHS Directive 2011 65 EU See Disposal and Recycling on page
3. www axis com patent htm and one or more additional patents or pending patent applications in the US and other countries This product contains licensed third party software See the menu item About in the product s user interface for more information This product contains source code copyright Apple Computer Inc under the terms of Apple Public Source License 2 0 see http www opensource apple com apsi The source code is available from http developer apple com darwin projects bonjour Equipment Modifications This equipment must be installed and used in strict accordance with the instructions given in the user documentation This equipment contains no user serviceable components Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals Trademark Acknowledgments AXIS COMMUNICATIONS AXIS ETRAX ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions All other company names and products are trademarks or registered trademarks of their respective companies Apple Boa Apache Bonjour Ethernet Internet Explorer Linux Microsoft Mozilla Real SMPTE QuickTime UNIX Windows Windows Vista and WWW are registered trademarks of the respective holders Java and all Java based trademarks and logos are trademarks or registered trademarks of Oracle and or its affiliates UPnP js a certification mark of the UPnP
4. 3 A copy of the original declaration of conformity may be obtained from Axis Communications AB See Contact Information on page 3 Electromagnetic Compatibility EMC This equipment has been designed and tested to fulfill applicable standards for e Radio frequency emission when installed according to the instructions and used in its intended environment e Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment USA This equipment has been tested using a shielded network cable STP and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipmen
5. Audio out green 3 5 mm output for audio line level that can be connected to a public address PA system or an active speaker with a built in amplifier A stereo connector must be used for audio out SD card slot A standard or high capacity microSD card not included can be used for local recording with removable storage To prevent corruption of recordings the SD card should be unmounted before removal To unmount go to Setup gt System Options gt Storage gt SD Card and click Unmount Control button The control button is used for e Resetting the product to factory default settings See page 14 e Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS Service For more information about these services see the User Manual AXIS P7216 Video Encoder Power connector 2 pin terminal block for power input Use a limited power source LPS with either a rated output power limited to 100 W or a rated output current limited to 5 A 1 0 terminal connector Use in applications for e g motion detection event triggering time lapse recording and alarm notifications In addition to an auxiliary power and a GND pin the 1 0 terminal connector provides the interface to e Digital output For connecting external devices such as relays and LEDs Connected devices can be activated by the VAPIX Application Programming Interface output buttons on the Live View page or by an Action Rule The output w
6. page 7 Study the specifications See page 10 Install the hardware See page 73 nm 5 N Access the product See page 14 Package Contents e Axis P7216 Video Encoder e Power adapter model Type PS P e Mounting kit 4 surface pads 2 brackets e Terminal connectors 41 0 6 pin connector 4 RS 485 422 2x2 pin connector e Installation and Management Software CD e Printed materials Installation Guide this document Hardware Overview gt A MR PE YQA O OO 7 8 1 C 7 7 Cy CI o 1 Power connector NN O OU R amp N OANA AARWNH AXIS P7216 Video Encoder Network connector SFP Network connector RJ45 Auxiliary connector RJ45 maintenance Card slot microSD x4 1 0 terminal connector x4 RS 485 422 connector x4 Control button x4 Protective earth a 1 9 8 7 Video input connector BNC x16 Network LED RJ45 Network LED SFP Network LED auxiliary Power LED Status LED 1 4 Audio out connector Audio in connector 2 Audio in connector 1 LED Indicators LED Color Indication Net Green Steady for connection to a 1 GBit s network Flashes for network activity ne Amber Steady for connection to a 10 100 MBit s network Flashes for network activity Unlit No network connection Status Green Steady green for normal operation Amber Steady during startup a
7. INSTALLATION GUIDE AXIS P7216 Video Encoder AXIS COMMUNICATIONS Legal Considerations Video and audio surveillance can be regulated by laws that vary from country to country Check the laws in your local region before using this product for surveillance purposes This product includes one 1 H 264 decoder license and one h AAC decoder license To purchase further licenses contact your reseller Liability Every care has been taken in the preparation of this document Please inform your local Axis office of any inaccuracies or omissions Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice Axis Communications AB makes no warranty of any kind with regard to the material contained within this document including but not limited to the implied warranties of merchantability and fitness for a particular purpose Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing performance or use of this material This product is only to be used for its intended purpose Intellectual Property Rights Axis AB has intellectual property rights relating to technology embodied in the product described in this document In particular and without limitation these intellectual property rights may include one or more of the patents listed at http
8. are parts provided by or recommended by Axis e Do not attempt to repair the product by yourself Contact Axis support or your Axis reseller for service matters Transportation e When transporting the Axis product use the original packaging or equivalent to prevent damage to the product Battery The Axis product uses a 3 0 V CR2032 lithium battery as the power supply for its internal real time clock RTC Under normal conditions this battery will last for a minimum of five years Low battery power affects the operation of the RTC causing it to reset at every power up A log message will appear when the battery needs replacing The battery should not be replaced unless required but if the battery does need replacing contact Axis support at www axis com techsup for assistance e Risk of explosion if the battery is incorrectly replaced e Replace only with an identical battery or a battery which is recommended by Axis e Dispose of used batteries according to local regulations or the battery manufacturer s instructions AXIS P7216 Video Encoder Installation Guide This Installation Guide provides instructions for installing AXIS P7216 Video Encoder on your network For other aspects of using the product see the User Manual available at www axis com Installation Steps 1 Make sure the package contents tools and other materials necessary for the installation are in order See page 7 Study the hardware overview See
9. gital output Internal connection Max load 100 mA to ground when activated floating Max voltage 40 V DC unconnected when deactivated If used with an inductive load e g a relay a diode 11 AXIS P7216 Video Encoder must be connected in parallel with the load for protection against voltage transients 3 3 V max 250 mA A 1 0 configured as input B 1 0 configured as output Power connector 2 pin terminal block for power input Use a limited power source LPS with either a rated output power limited to 100 W ora rated output current limited to 5 A Audio connector 3 5 mm audio connectors stereo DC power input 12 AXIS P7216 Video Encoder Audio Input Audio Output 1 Tip Microphone Line in Line out mono 2 Ring 3 Sleeve Ground Ground RS 485 422 connector Two 2 pin terminal blocks for RS485 RS422 serial interface The serial port can be configured to support e Two wire RS485 half duplex RX TX TX e Four wire RS485 full duplex Een e Two wire RS422 simplex e Four wire RS422 full duplex point to point communication Function Pin Notes RS485 RS422 RX TX 1 RX For full duplex RS485 RS422 A RX TX For half duplex RS485 RS485 RS422 RX TX 2 B RS485 RS422 TX A 3 TX For full duplex RS485 RS422 RS485 RS422 TX B 4 Install the Hardware Mount the video encoder The AXIS P7216 is supplied with a
10. ill show as active shown under System Options gt Ports amp Devices if the alarm device is activated e Digital input An alarm input for connecting devices that can toggle between an open and closed circuit for example PIRs door window contacts glass break detectors etc When a signal is received the state changes and the input becomes active shown under System Options gt Ports amp Devices RS 485 RS 422 connector Two 2 pin terminal blocks for RS 485 RS 422 serial interface used to control auxiliary equipment e g PTZ devices Specifications Operating Conditions The casing of AXIS P7216 is not approved for outdoor use The product may only be installed in indoor environments Product Temperature Humidity AXIS P7216 0 C to 50 C 20 80 RH non condensing 32 F to 122 F Power Consumption Product Power supply AXIS P7216 AXIS PS P power supply 10 AXIS P7216 Video Encoder Connectors 1 0 terminal connector 6 pin terminal block for ceed e Digital Input 123456 e Digital Output e Auxiliary power and ground GND Function Pin Notes Specifications GND 1 Ground 3 3 V DC 2 Can be used to power auxiliary equipment Max load 250 mA Power Note This pin can only be used as power out Configurable 3 Digital input Connect to GND to activate 0 to 40 V DC Input or 6 or leave floating unconnected to deactivate Output uitput Di
11. mounting kit containing brackets The unit can be mounted in a rack or on a wall After removing the existing 4 screws attach the mounting brackets to the video encoder at an angle suitable for installation in a standard 1U 19 rack or on the wall Mounting on a wall 1 Position the video encoder against the wall with the brackets attached and mark the four mounting holes for each bracket Drill the four mounting holes Attach the video encoder to the wall using appropriate screws 13 AXIS P7216 Video Encoder Connect the cables Connect the video encoder to the network using a network cable RJ45 and or a SFP cable Optionally connect the external input output devices Optionally connect active speakers and or external microphones Connect the cameras to the video inputs Connect the supplied indoor power adapter Check that the indicator LEDs indicate the correct conditions See LED Indicators on page 8 D Ai Po SN oS Auxiliary Connector The AXIS P7216 is equipped with an additional RJ45 network connector The purpose with this connector is to simplify maintenance work on the AXIS P7216 that requires connection to a computer The auxiliary connector should only be connected during maintenance work Access the Product Use the tools provided on the Installation and Management Software CD to assign an IP address set the password and access the video stream This information is also available from the support page
12. nd when restoring settings Red Slow flash for failed upgrade Power Green Normal operation Amber Flashes green amber during firmware upgrade AXIS P7216 Video Encoder Connectors For specifications see page 10 BNC connector Each video input is terminated using a coax BNC connector Connect a 75 Ohm coaxial video cable the recommended maximum length is 800 feet 250 meters 75 Ohm video termination can be enabled disabled for the video input via the product s web page at Video amp Audio gt Video Input gt Video termination This termination is enabled on factory default In cases where the product is to be connected in parallel with other equipment for optimum video quality it is recommended that termination be enabled for only the last device in the video signal chain Network connector RJ45 Ethernet connector SFP connector The unit can only use one Network interface either an SFP module or RJ45 connector SFP module has higher priority than the RJ45 connector The product shall be connected using a shielded network cable STP All cables connecting the product to the network switch shall be shielded STP and intended for their specific use Make sure that the network switch is properly grounded For information about regulatory requirements see Regulatory Information on page 2 Audio in pink 3 5 mm input for a mono microphone or a line in mono signal left channel is used from a stereo signal
13. r nearest designated collection point contact your local authority responsible for waste disposal In accordance with local legislation penalties may be applicable for incorrect disposal of this waste Europe This symbol means that the product shall not be disposed of together with household or commercial waste Directive 2012 19 EU on waste electrical and electronic equipment WEEE is applicable in the European Union member states To prevent potential harm to human health and the environment the product must be disposed of in an approved and environmentally safe recycling process For information about your nearest designated collection point conta disposal Bu information This produc ct your local authority responsible for waste sinesses should contact the product supplier for about how to dispose of this product correctly complies with the requirements of Directive 2011 65 EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment RoHS China This product complies with the requirements of the legislative act Administration on the Control of Pollution Caused by Electronic Information Products ACPEIP Contact Information Axis Communications AB Emdalav gen 14 223 69 Lund Sweden AXIS P7216 Video Encoder Safety Information Read through this Installation Guide carefully before installing the product Keep the Installation Guide for future reference
14. s on www axis com techsup Reset to Factory Default Settings Reset to factory default should be used with caution A reset to factory default will reset all settings including the IP address to the factory default values To reset the product to the factory default settings To reset a single channel to the original factory default settings use the button provided in that unit s web interface It is also possible to reset parameters to factory default via the web interface Go to Setup gt System Options gt Maintenance 14 AXIS P7216 Video Encoder Further Information The User Manual is available at www axis com Visit www axis com techsup to check if there is updated firmware available for your network product To see the currently installed firmware version go to Setup gt About Visit Axis learning center www axis com academy for useful trainings webinars tutorials and guides Warranty Information For information about Axis product warranty and thereto related information see www axis com warranty 15 Installation Guide Ver M1 8 AXIS P7216 Video Encoder Date May 2013 Axis Communications AB 2013 Part No 50452
15. t into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Canada This Class B digital apparatus complies with Canadian ICES 003 Tel 46 46 272 18 00 Fax 46 46 13 61 30 www axis com Europe This digital equipment fulfills the requirements for RF emission according to the Class B limit of EN 55022 This product fulfills the requirements for immunity according to EN 61000 6 1 residential commercial and light industrial environments This product fulfills the requirements for immunity according to EN 61000 6 2 industrial environments Australia New Zealand This digital equipment ful emission according to the Japan ills the requirements for RF Class B limit of AS NZS CISPR 22 TOREJ PIAB RRM CT COR eld RE CAT OC LEE NELTLE TH TOBBRIVASTLEYD 3 VSB HLTANA LE BEES TA EDBUET B TEL ik OLTRE Korea o 7 7l 713 8B z JPA OAL Ae X SOA AES Safety This product complies with IEC EN UL 60950 1 Safety of Information Technology Equipment The power supply used with this product shall fulfill the requirements for Safety Extra Low Voltage SELV and Limited Power Source LPS according to IEC EN UL 60950 1 Disposal and Recycling When this product has reached the end of its useful life dispose of it according to local raws and regulations For information about you
Download Pdf Manuals
Related Search