Home

VoIP ATA series (ATA171plus, ATA172plus, ATA-171, ATA

1. row DND Time of This command is to configure DND time period at phone 1 phone 1 Default is From 0 O start time To 0 0 end of time The time format is 24 hours system hh mm Hours Minutes Each field has 2 digits number only Alarm Type of Default is Disable Configure Phone 1 alarm function When you phone 1 set to enable phone 1 will Ring according to pre configured see next row how to configure alarm time alarm time The alarm Ring last for 1 minute To cancel alarm setting simply pickup handset and hand up The default ring time is 1 minute Alarm Time for Default is 0 0 Hour Minute The time format is 24 hours phone 1 system hh mm Each field allows to enter 2 digits number only Submit Save the configuration Reset Clear the configuration Figure 2 2FXS for ATA172plus and ATA 172 Call Service Setting Forward Type Forward Number Rings Disable v Phone 1 Disable Phone 2 Disable v 0 Phone 1 Disable v joy Phone 2 Disable v From To hh mm Phone 1 Disable i From To IE hh mm Phone 2 Disable x hh mm Phone 1 Disable a hh mm Phone 2 Figure 2 Field Decription Forward Type of Default is Disable To configure Phone 1 forward type phonel Here provides 5 options Disable All unconditional Busy No Answer Busy or No Answer Welltech Technology Co Ltd 29 88 2
2. Next Configuration time Field Decription Type Default is Disable Define auto configure method When it was enabled ATA visit assigned Server to download MACI D dat file Option Disable TFTP FTP and HTTP 2 Steps Default is Disable Define 2 stages update process The first step configuration is to download common used messages The second step is to SIP Server registration Account and Password Option Disable Enable Server auto Default is Disable Define discover provision server method discover Option Disable DHCP TFTP Option 66 TFTP Broadcasting DHCP TFTP Option 66 TFTP When DHCP server assigns one IP to ATA it also send the Option 66 server IP to ATA And ATA will fill in the Optoin 66 IP to TFTP Server field Broadcasting Using broadcasting method to search for Server Scheduling Default is Disable When you enable the Scheduling ATA will follow the Next Config Time to check or update configuration data Option Disable Enable Welltech Technology Co Ltd 67 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription TFTP Server TFTP File Path Define TFTP server IP The format is XXX XXX XXX XXX Data length is 15 digits TFTP configuration files localtion It can be numbers or strings Maximum length 63 digits For Instance 123 to setup file folder An has to enter behind HTTP Server Define the HTTP Address which can
3. ho 10 representative is 0 dB and every scale is 3 dB Figure 1 Field Decription Handset Volume Default is 10 Control the volume of the Handset receiver from O to 14 Maximum length is 2 digits Handset Gain Default is 10 Control the handset gain microphone volume to send to remote site from 0 to 15 Maximum length is 2 digits Submit button Save the configuration Reset button Clear the configuration Figure 2 ATA171plus ATA 171 and ATA 171M Volume Setting Handset Volume Handset Gain PSTN Out Volume PSTN In Gain 10 10 m 10 10 representative is 0 dB and every scale is 3 dB Figure 2 Field Decription Handset Volume Default is 10 Control the volume of the Handset receiver from O to 14 Maximum length is 2 digits Handset Gain Default is 10 Control the handset gain microphone volume to Welltech Technology Co Ltd 39 88 2012 1 2 fin WELLTECH ATA Web user guide send to remote site from 0 to 15 Maximum length is 2 digits PSTN Out Default is 10 Adjust the volume from FXO to IP port 0 to 12 Volume PSTN In Gain Default is 10 Adjust the volume from IP to FXO port 0 to 12 Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 40 88 2012 1 2 furw TECH ATA Web user guide 7 Netw
4. 4 5 expire time x 4 5 Default is General Option is General 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 This feature MUST be compatible with SIP Server Calculate method General expire time expire time 30 x6 and this time is longer than 60 seconds If NOT the time has to reduce 5 seconds as final time 1 2 expire time x 1 2 2 3 expire time x 2 3 3 4 expire time x 3 4 60 88 2012 1 2 fin WELLTECH ATA Web user guide SIP T2 Field Decription 5 6 expire time x 5 6 6 7 expire time x 6 7 7 8 expire time x 7 8 8 9 expire time x 8 9 9 10 expire time x 9 10 SIP Register Default 64 seconds Register Retry time when register fail Retry Interval Range 5 3600 seconds Data length is 4 digits SIP T1 Default is 500 ms Configure round trip time RTP estimate T1 determines several timers as defined in RFC3261 For example when an unreliable transport protocol is used a Client Invite transaction retransmits requests at an interval that start at T1 seconds and doubles after every retransmission A Client General transaction retransmits requests at an interval that starts at T1 and doubles until it reaches T2 Range 500 2000ms Data length is 4 digits Default is 4000 ms Determines the maximum retransmission interval for non I NVITE requests and INVITE responses Range 4000 16000 ms SIP Timer B F H Default is 32000 ms The maximum retransmit interval for non I
5. Format xxx xxx xxx xxx Length is 63 digits queries 7 2 2 Instruction DDNS Setting Active Disable v Host Name 7 User Name Password E mail Address DDNS Server List members dyndns org 5 DDNS Server Type dyndns Wild Card Disable v BACKMX Disable Off Line Disable v Field Decription Active Default is Disable The DDNS function will be enabled when you set to Enable Host name Enter Host name which can be IP Address or Domain Name Enter user s name for registering to DDNS Server Password Enter the password Maximum length is 63 digits E mail address Enter E mail address Maximum length is 63 digits DDNS Server List Default is Disable Configure your service provider here Provide option User input members dyndns rog and www dtdns com mode DDNS Server Enter DDNS Server which can be IP Address or Domain Name Format XXX XXX XXX XXX Maximum length is 63 digits Type Default is dyndns Provide 3 options dyndns statdns and customer mode Wild Card Default is Enable Provides 3 options Enable Disable and Nochg NOTE Please make sure your DDNS provider supports this feature when you set it to enable BACKMX Default is Disable The backup MX function will was activate when you set it to enable It provides two options Disable and Enable NOTE Please make sure your DDNS provider supports this feature when you set it to enable Welltech Techno
6. Public Port Number 5060 80 65535 Field Decription STUN Active Default is Disable Option Disable Enable STUN Server Default is stun xten com Define STUN server IP which can be IP Name address or Domain Name The format is xxx xxx xxx xxx Data length is 63 digits STUN Port Default port is 3478 Define STUN port Number Range 80 65535 Data length is 5 digits Force Active Default is Disable When this feature was enabled ATA change SIP messge to IP Option Disable Enable Public IP Address Define Router external IP address Data length is 63 digits The format iS XXX XXX XXX XXX Public Port Default port is 3478 Define Router external port number Number Range 80 65535 Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 64 88 2012 1 2 fhiweuaca ATA Web user guide 10 Management Advanced configuration Provide Status Log Auto Config Auto Update New Firmware Advanced Passowrd Tones Default Language functions 10 1 Status Log 10 1 1 Function Provide system log 10 1 2 Instruction Status Log Page 1 SSS eee 0 lt 2010 09 14 10 35 gt Get Time from SNTP server Succeed 1 lt 2005 01 01 08 00 gt Get SNTP server IP 75 144 70 35 2 lt 2005 01 01 00 00 gt DHCPC Got Ip 192 168 50 26 3 lt 2005 01 01 00 00 gt DHCPC state 1 2 4 lt 2005 01 01 00 00 gt DHCP_SendRequest 5 lt 2005 01 01 0
7. 2012 1 2 ATA Web user guide bu WELLTECR Figure 8 2FXS ATA LAN Mode NAT VPN WAN Port Link Status UP Type Fixed IP Client IP Address 61 62 236 68 Subnet Mask 255 255 255 0 Default Gateway 61 62 236 54 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 MAC ID 00 11 22 33 44 55 192 168 123 1 MAC ID 00 11 22 33 44 66 VPN PPTP L2TP Type PPTP IP Address 192 168 50 17 System Information Firmware Version 1012090 DSP Version LE 1007290 System Up Time 0 day s O hour s 0 minute s Network Link Up Time O day s 0 hour s 0 minute s Current Time 2011 01 03 16 40 Update Date 2011 01 03 Register Information Phone 1 Realm 1 Status Not Registered Number Realm 2 Status Not Registered Number Realm 3 Status Not Registered Number Realm 4 Status Not Registered Number Realm 5 Status Not Registered Number Phone 2 Realm 1 Status Realm 2 Status Realm 3 Status Realm 4 Status Realm 5 Status Welltech Technology Co Ltd Not Registered Not Registered Not Registered Not Registered Not Registered Number Number Number Number Number Figure 8 16 88 2012 1 2 fhiweuaca ATA Web user guide 6 Phone This item provides Phone Book Dial Plan Call Service Genereal and volume configuration 6 1 Phone Book 6 1 1 Function description Phone Book provides 140 entries When you pick up the phone and dial a TEL NO ATA will compare the Phone Number with the ph
8. ATA will switch to the second account and dial out the called number Maximum data length is 7 digits PS If account registers to SIP Server fail it will not be switched Realm 3 prefix Default setting is 3 When you dial 3 called number ATA will switch to the third account and dial out the called number Maximum data length is 7 digits PS If account registers to SIP Server fail it will not be switched Realm 4 prefix Default setting is 4 When you dial 4 called number ATA will switch to the fourth account and dial out the called number Maximum data length is 7 digits PS If account registers to SIP server fail it will not be switched Realm 5 prefix Default setting is 5 When you dial 5 called number ATA will switch to the fifth account and dial out the called number Maximum data length is 7 digits PS If account registers to SIP Server fail it will not be switched Auto Dial Time Default is 5 seconds the configuration range is 3 to 9 seconds ATA will dial out automatically when user didn t enter any digit within this time period Use as send Default is Enable Define as end of dialing key key Enable When ATA received it will dial out immediately no need wait for the auto dial out time Disable follow Auto Dial Time time to dial out Auto PSTN Default is Disable Provide PSTN auto backup function When SIP backup account register to SIP Server fail FXS port was switched to PSTN lin
9. Field Decription 0 65535 Maximum length 5 bytes On Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 83 88 2012 1 2 furw LLTECH ATA Web user guide 10 8 Default 10 8 1 Function Restore whole configuration setting to factory default except Phone Book 10 8 2 Instruction Restore Default Setting Restore default setting Field Decription Restore Restore to default setting and reboot Note It doesn t restore configuration data which was downloaded via Config db Welltech Technology Co Ltd 84 88 2012 1 2 furw LLTECH ATA Web user guide 10 9 Language 10 9 1 Function Provide language option for web configuration ATA will au
10. G 723 voice codec Codec Setting Disabled Codecs ay Enabled Codecs a G 726 16 G 711 u law G 726 24 G 711 a law G 726 32 G 729 G 726 40 gt gt G 723 zi G 711 and G 729 20 ms G 723 BJ ms Le G 723 5 3K Disable v Silence Suppression VAD Disable v Echo Cancel Disable Codec Type ID Value G726 16 Default 95 127 G726 24 Default x 95 127 G726 32 Default 95 127 G726 40 Default v 95 127 RFC 2833 Default v 95 127 Field Decription Disabled Codecs Default is G 726 16 G 726 24 G 726 32 G 726 40 iLBC Provide disable codec item here gt gt lt lt gt gt move to Enable Codec lt lt move to Disable Codec Enabled Codec Default is G 711 u law G 711 a law G 729 and G 723 Provide enable codec item here The upper position codec has higher priority than lower one in this column G 711 and G 729 Default is 20 ms which defines G 711 and G 729 RTP payload type Provide options are 10 20 30 40 50 60 70 80 90ms G 723 Default is 30 ms which defines G 723 RTP payload type Welltech Technology Co Ltd 55 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription Provide options are 30 60 90 ms G 723 5 3K Default is Disable Define G 723 5 3K function When it was selected to enable th
11. Not Registered Not Registered Number Number Number Number Number Realm 1 Status Realm 2 Status Realm 3 Status Realm 4 Status Realm 5 Status Welltech Technology Co Ltd Not Registered Not Registered Not Registered Not Registered Not Registered Number Number Number Number Number Figure 6 14 88 2012 1 2 ATA Web user guide fir WELLTECH Figure 7 2FXS ATA LAN Mode NAT System Information Link Status UP Type DHCP Client IP Address 192 168 50 14 Subnet Mask 255 255 255 0 Default Gateway 192 168 50 1 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 MAC ID 00 11 22 33 44 55 LAN Port IP Address 192 168 123 1 MAC ID 00 11 22 33 44 66 System Information Firmware Version 1012090 Update Date 2011 01 03 DSP Version LE 1007290 System Up Time 0 day s 0 hour s 0 minute s Network Link Up Time 0 day s 0 hour s 0 minute s Current Time 2011 01 03 14 14 Register Information Phone 1 Realm 1 Status Not Registered Number Realm 2 Status Not Registered Number Realm 3 Status Not Registered Number Realm 4 Status Not Registered Number Realm 5 Status Not Registered Number Phone 2 Realm 1 Status Realm 2 Status Realm 3 Status Realm 4 Status Realm 5 Status Welltech Technology Co Ltd Not Registered Not Registered Not Registered Not Registered Not Registered Number Number Number Number Number Figure 7 15 88
12. OS UO Updates anien a E AN RER eaeee 69 10 4 New FirMWare n scssaccostsveounsesongunsenrdesssanstpabsinisana dd oneiussenntedssasvaeinslaoiouterstuetotetees 71 10 5 Advanced eenia E ET EAN E AER 72 T06 PASS VION sccscicisonnistsnciehneisndgiaiesietnimnnia T O TRA 77 10 7 Tones Settihg eisisto ioniene aia Nasii eL ease 80 10 9 Defaults ir nen e e E a Guanauenidaneianaasanecies 84 T0 9 Langage nescion E A E E 85 T1 Save amp ReDOOteniiioenu mienie a AEE E aes 86 Welltech Technology Co Ltd 2 88 2012 1 2 fhiwes LTECH ATA Web user guide Fe Pe GO os mee eR a WO a on SO er at St a EV et 86 Tie FU SEIN Osseo sek ce npesiac E tice whe ties sateen em ensures ahce nec E 86 TA ao 0 cena encene eee nenereree ae eee E ne ere enat E EE 87 T 1 FUCO eae eee neem tee rent mee te nce emp SIR eer Pn me RE eRe MTCC tn Re ene RARE Mee ICCC 87 12 2 Mace gill ald ON eee nema e re emee a en entree Net eT emer PENT On Teepe Teme tT Terme an en Nene mrt TT eee 87 Welltech Technology Co Ltd 3 88 2012 1 2 fin WELLTECH ATA Web user guide 1 Introduction This user s manual is for all ATA series VoIP terminal adapter ATA This user s manual explains the IVR instruction web configuration and command line configuration for the ATA Before using the ATA some setup processes are required to make the ATA work properly Please refer to the Instruction of Web Environment for further information 2 Hardware Overview The ATA has
13. Update New Firmware Advanced Password Tones Default reset to default Language function Save amp Reboot Save and Reboot function Help Logout Logout system Welltech Technology Co Ltd 8 88 2012 1 2 Piacra ATA Web user guide 5 5 System I nformation 5 5 1 Function description There are network information firmware version and SIP register status 5 5 2 System Information example Figure 1 FXS FXS PSTN FXS FXO LAN Mode Bridge System Information Link Status UP Type DHCP Client IP Address 192 168 50 10 Subnet Mask 255 255 255 0 Default Gateway 192 168 50 1 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 MAC ID 00 09 f3 77 8e 38 LAN Port IP Address 192 168 123 1 MAC ID 00 09 f3 77 8e 38 System Information Firmware Version 1012090 Update Date 2010 12 16 DSP Version LE 1007290 System Up Time 0 day s 7 hour s 23 minute s Network Link Up Time 0 day s 7 hour s 23 minute s Current Time 2010 12 16 18 37 Register Information Phone 1 Realm 1 Status Not Registered Number Realm 2 Status Not Registered Number Realm 3 Status Not Registered Number Realm 4 Status Not Registered Number Realm 5 Status Not Registered Number Figure 1 Welltech Technology Co Ltd 9 88 2012 1 2 Parra ATA Web user guide Figure 2 FXS FXS PSTN FXS FXO LAN Mode Bridge VPN System Information Link Status UP Type Fixed IP Client IP Address 61 62 23
14. byte Data Range is 0 1 The CFI bit is used to indicate that all MAC addresses present in the MAC data field are in canonical format This field is interpreted differently depending on whether it is an ethernet encoded tag header or a SNAP encoded tag header In SNAP encoded TPID the field indicates the presence or absence of the canonical format of addresses In Ethernet encoded TPID it indicates the presence of the Source Routing Information RIF field after the length field The RIF field indicates routing on ethernet frames SIP VID Default is 0 disable This feature is to define SIP VLAN ID Welltech Technology Co Ltd 45 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription Range is 3 4094 This feature is an independent one which do not need to Enable VLAN Packets if you want to enable this feature Data length is 4 digits User Priority Default is 0 disable Define SIP package priority Range is 0 7 802 1P CFI Default 0 To set Canonical Format Indicator CFI for one byte Data Range is 0 1 RTP VID Default is O disable Define SIP VLAN ID Range is 3 4094 This feature is an independent one which do not need to Enable VLAN Packets if you want to enable this feature Data length is 4 digits User Priority 802 1P Default is 0 disable Define RTP package priority Range 0 7 CFI Default 0 To set Canonical Format Indicator CFI fo
15. for end of dialing key key Enable when ATA received it will dial out immediately no need wait for the auto dial out time Disable follow Auto Dial Time time to dial out Submit Save the configuration Reset Clear the configuration Welltech Technology Co Ltd 20 88 2012 1 2 Purwa ATA Web user guide Figure 2 1FXS 1FXO ATA 171M Dial Plan Setting Index Drop prefix __Prefix Ful SE 1 Disable Disable v Disable v A w N Disable index Dial Now Rule 1 2 3 4 5 6 7 8 Realm 1 prefix y Realm 2 prefix 2 Realm 3 prefix ci Realm 4 prefix 4 Realm 5 prefix 5 Auto Dial Time 3 sec Use as send key Disable v Auto PSTN backup Disable v PSTN feature code Routing Type Disable v Routing Rule Figure 2 Field Description Index Index number Drop Prefix Default setting is Disable When it was set to Enable andthe number match the Rule number ATA will replace the Rule field number and use Prefix field number instead Disable Add prefix number in front of the called number when called number match Rule number Enable Replace Rule number with Prefix number w
16. 2 When you dial 2 called number ATA will switch to the second account and dial out the called number Maximum data length is 7 digits It only allows to enter number and PS If account registers to SIP Server fail it will not be switched Realm 3 prefix Default setting is 3 When you dial 3 called number ATA will switch to the third account and dial out the called number Maximum data length is 7 digits It only allows to enter number and PS If account registers to SIP Server fail it will not be switched Realm 4 prefix Default setting is 4 When you dial 4 called number ATA will switch to the fourth account and dial out the called number Maximum data length is 7 bytes It only allows to enter number and PS If account registers to SIP Server fail it will not be switched Realm 5 prefix Default setting is 5 When you dial 5 called number ATA will switch to the fifth account and dial out the called number Maximum data length is 7 bytes It only allows to enter number and PS If account registers fail it will not be switched Auto Dial Time Default is 5 seconds the option range is 3 to 9 seconds ATA will dial out automatically when user didn t enter any digit within this time period Use as send Default is Enable Define as end of dialing key Welltech Technology Co Ltd 22 88 2012 1 2 fin WELLTECH ATA Web user guide Fiel
17. 30 Off Time 2 0 x10ms 9 0 0 0 400 On Time 3 0 x10ms 9 0 o 0 0 Off Time 3 0 x10ms 0 0 0 0 lo Tone Gain Value 372767 gt 0bB 16384 gt 6dB 8192 gt 12dB Field Decription Dial Tone Dial tone configuration Cadence On Default is disable Hi Tone Freq Default is 440 Only numerals are acceptable Data range 0 4096 Maximum length 4 bytes Lo Tone Freq Default is 350 Only numerals are acceptable Data range 0 4096 Maximum length 4 bytes Hi Tone Gain Default 4522 Only numerals are acceptable Data range 0 65535 Maximum length 5 bytes Lo Tone Gain Default 2261 Only numerals are acceptable Data range 0 65535 Maximum length 5 bytes On Time 1 Default is 0 The unit is 10ms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 3 Default is 0 The unit is 10ms Only numerals are acc
18. Check New Firmware Type Scheduling Date Scheduling Time Automatic Update Firmware File Prefix Disable x Power ON and Scheduling 14 1 30 days AM 00 00 05 59 Notify only PHONE ATA Web user guide Exp download Exp 60 35 187 30 Exp download Exp 60 35 17 1 Exp file load Next Update time Field Decription Type Default is Disable Defineversion upgrade method Option Disable TFTP FTP or HTTP mode TFTP Server Set up TFTP Server IP address which can be IP Address or Domain Name Format XXX XXX XXX XXX Data length is 15 digits Set up TFTP Path Enter the path of the file which can be numbers or strings Maximum length is 63 digits For Instance 123 to setup file folder An has to enter behind Define the HTTP Address which can be IP Address or Domain Name Format xxx xxx xxx xxx Maximum length 63 digits HTTP configuration files localtion It can be numbers or strings Maximum length 63 digits For Instance 123 to setup file folder An has to enter behind Define the FTP Address which can be IP Address or Domain Name Format xxx xxx xxx xxx Maximum length 63 digits FTP Username FTP server user name Data length is 63 digits FTP Password Set up FTP login password Data length is 63 digits TFTP Path HTTP Server HTTP Path FTP Server Welltech Technology Co Ltd 69 88 2012 1 2 fin WE
19. Mode Welltech Technology Co Ltd 57 88 2012 1 2 fhiwes LTECH ATA Web user guide Field Decription longer than 60 seconds If NOT the time has to reduce 5 seconds as final time 1 2 expire time x 1 2 2 3 expire time x 2 3 3 4 expire time x 3 4 4 5 expire time x 4 5 5 6 expire time x 5 6 6 7 expire time x 6 7 7 8 expire time x 7 8 8 9 expire time x 8 9 9 10 expire time x 9 10 SIP Register Retry Interval Default 64 seconds Register Retry time when register fail Range 5 3600 seconds Data length is 4 digits SIP T1 Default is 500 ms Configure round trip time RTP estimate T1 determines several timers as defined in RFC3261 For example when an unreliable transport protocol is used a Client Invite transaction retransmits requests at an interval that start at T1 seconds and doubles after every retransmission A Client General transaction retransmits requests at an interval that starts at T1 and doubles until it reaches T2 Range 500 2000ms Data length is 4 digits SIP T2 Default is 4000 ms Determines the maximum retransmission interval for non I NVITE requests and INVITE responses Range 4000 16000 ms SIP Timer B F H Default is 32000 ms The maximum retransmit interval for non INVITE requests and INVITE responses Range 8000 127000 Data length is 6 digits B 64 x SIP T1 INVITE transaction timeout timer F 64 x SIP T1 non INVITE transa
20. Number Realm 4 Status Not Registered Number Realm 5 Status Not Registered Number Figure 3 Welltech Technology Co Ltd 11 88 2012 1 2 Parra ATA Web user guide Figure 4 FXS FXS PSTN FXS FXO LAN Mode NAT VPN System Information Link Status UP Type Fixed IP Client IP Address 61 62 236 68 Subnet Mask 255 255 255 0 Default Gateway 61 62 136 254 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 MAC ID 00 2a 10 12 08 b0 LAN Port IP Address 192 168 123 1 MAC ID 00 3a 10 12 08 b1 VPN PPTP L2TP ype PPTP IP Address 192 168 50 17 i System Information Firmware Version 1012090 Update Date 2011 01 03 DSP Version AC 1008170 System Up Time 0 day s 0 hour s 16 minute s Network Link Up Time 0 day s 0 hour s 0 minute s Current Time 2011 01 03 16 36 Register Information Phone 1 Realm 1 Status Not Registered Number Realm 2 Status Not Registered Number Realm 3 Status Not Registered Number Realm 4 Status Not Registered Number Realm 5 Status Not Registered Number Figure 4 Welltech Technology Co Ltd 12 88 2012 1 2 Parra ATA Web user guide Figure 5 2FXS ATA LAN Mode Bridge No NAT mode System Information Link Status UP Type DHCP Client IP Address 192 168 50 14 Subnet Mask 255 255 295 0 Default Gateway 192 168 50 1 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 MAC ID 00 11 22 33 44 55 System Information Firmware Version 1
21. as On Hook Unit 10ms Maximum length is 3 digits FXS Port Coutry Default is USA type impedance To select FXS Port impedance of the analog telephone by different country s specification Flash Signal Detect Max Default is 60 equal 600ms To detect Hook Flash Time at maximum time When Flash time is less than 600ms it was regarded as HOOK FLASH command When Flash time is longer than 600ms it was regarded as On Hook drop call command Configuration range is from 4 255 Unit 10ms Maximum length is 3 digits Flash Signal Detect Min Default is 7 equal to 70ms When Flash Time is longer than 70ms it will be regarded as FLASH command When Flash Time is less than 70 ms it will be regarded as On Hook Configuration range is from 3 12 Unit 10ms Minimum length is 3 digits NET Bandwidth Limit Default is Disable LAN port bandwidth limitation Option Disable 128 256 512 1024 2048 4096 8192 kbps Reset button Submit button Save the configuration Clear the configuration Welltech Technology Co Ltd 76 88 2012 1 2 Piacra ATA Web user guide 10 6 Password 10 6 1 Function There are 3 levels login name and password 10 6 2 Instruction Figurel Admin Password Setting New User Name New Password Confirmed Password New User Name New Password Confirmed Password New User Name _ SY New Pas
22. in advance See the next row Hotline Number of phone 1 Configure Phone 1 hotline number You can enter IP address or number or digit string and the maximum length is 63 digits For instance IP address 192 168 1 23 or telephone number 0800024365 Delay of phone 1 When you pick up the phone before dialing ATA start to count time until the first digit was dialed Default delay time is 3 seconds ATA will use Hotline number to dial if configured time was expired The configuration range is 1 to 6 seconds Hotline Type of phone 2 Phone 2 hotline function default is disable Enable ATA will dial the hotline number immediately when you pick up phone Note You need to configure Hotline number in advance See the next row Hotline Number of phone 2 Configure Phone 2 hotline number You can enter IP address or number or digit string and the maximum length is 63 digits For instance IP address 192 168 1 23 or telephone number 0800024365 Delay of phone 2 When you pick up the phone before dialing ATA start to count time until the first digit was dialed Default delay time is 3 seconds ATA will use Hotline number to dial if configured time was expired The configuration range is 1 to 6 seconds DND Type of phone 1 Configure Phone 1 DND function default is Disable When you set to Enable ATA will response SIP command 486 message Busy status to calling user once an call incoming There are 3
23. options to configure Disable Always Period DND enable according pre defined time period refer to time setting at next Welltech Technology Co Ltd 30 88 2012 1 2 Pwera ATA Web user guide Field Decription row DND Time of This command is to configure DND time period at phone 1 phone 1 Default is From 0 0 start time To 0 0 end of time The time format is 24 hours system hh mm Hours Minutes Each field has 2 digits number only DND Type of Configure Phone 2 DND function default is Disable When you phone 2 set to Enable ATA will response SIP command 486 message Busy status to calling user once an call incoming There are 3 options to configure Disable Always Period DND enable according pre defined time period refer to time setting at next row DND Time of This command is to configure DND time period at phone 2 phone 2 Default is From 0 0 start time To 0 0 end of time The time format is 24 hours system hh mm Hours Minutes Each field has 2 digits number only Alarm Type of Default is Disable Configure Phone 1 alarm function When you phone 1 set to enable phone 1 will Ring according to pre configured see next row how to configure alarm time alarm time The alarm Ring last for 1 minute To cancel alarm setting simply pickup handset and hand up The default ring time is 1 minute Alarm Time for Default is 0 0 Hour Minute The time format is 24 hours phone 1 syst
24. 0 00 gt Rx OFFER from 192 168 50 1 6 lt 2005 01 01 00 00 gt DHCP_SendDiscover T lt 2005 01 01 00 00 gt Enable DHCP_SERVER 8 lt 2005 01 01 00 00 gt Init Lan Interface 9 lt 2005 01 01 00 00 gt Iface type DHCP_CLIENT 10 lt 2005 01 01 00 00 gt Init Wan Interface 11 lt 2005 01 01 00 00 gt Application starting 12 13 14 15 16 17 18 19 20 21 22 23 24 Field Decription Page Default is 1 page 1 Index Information ID Content Include time and information lt 2010 09 14 10 35 gt Get Time from SNTP server Succeed lt 2010 09 14 10 35 gt event time and date Welltech Technology Co Ltd 65 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription Get Time from SNTP server Succeed event Get Status Log Save the Stauts Log to file default file name is Syslog log button Welltech Technology Co Ltd 66 88 2012 1 2 furw LLTECRP ATA Web user guide 10 2 Auto Configuration 10 2 1 Function Provide 3 kind of provision methods TFTP FTP and HTTP 10 2 2 Instruction Auto Configuration Setting Type Disable v 2 Steps Configuration Disable v Server Auto Discover Disable Scheduling Disable v TFTP Server TFTP File Path Exp download HTTP Server Exp 60 35 187 30 HTTP File Path Exp download FTP Server Exp 60 35 17 1 FTP User Name FTP Password FTP File Path Exp file load
25. 012 1 2 fin WELLTECH ATA Web user guide Field Decription NOTE Please make sure your service provider support this forward function Forward Number of phonel To configure Phone 1 forward number simply dial number or digit string The maximum digit length is 63 Rings of phone 1 That feature is used for no answer forward only Default is 3 rings When there is no answer after configured rings ATA forward to pre configured number automatically The configuration ring range is 1 to 6 rings This mode only supports Forward Type No Answer Forward Type of phone 2 Default is Disable To configure Phone 2 forward type Here provides 5 options Disable All unconditional Busy No Answer Busy or No Answer NOTE Please make sure your service provider support this forward function Forward Number Rings of phone 2 To configure Phone 2 forward number simply dial number or of phone 2 digit string The maximum digit length is 63 That feature is used for no answer forward only Default is 3 rings When there is no answer after configured rings ATA forward to pre configured number automatically The configuration ring range is 1 to 6 rings This mode only supports Forward Type No Answer Hotline Type of phone 1 Phone 1 hotline function default is disable Enable ATA will dial the hotline number immediately when you pick up phone Note You need to configure Hotline number
26. 012090 Update Date 2011 01 03 DSP Version LE 1007290 System Up Time 0 day s 0 hour s 0 minute s Network Link Up Time 0 day s 0 hour s 0 minute s Current Time 2011 01 03 14 14 Register Information Phone 1 Realm 1 Status Not Registered Number Realm 2 Status Not Registered Number Realm 3 Status Not Registered Number Realm 4 Status Not Registered Number Realm 5 Status Not Registered Number Realm 1 Status Not Registered Number Realm 2 Status Not Registered Number Realm 3 Status Not Registered Number Realm 4 Status Not Registered Number Realm 5 Status Not Registered Number Figure 5 Welltech Technology Co Ltd 13 88 2012 1 2 ATA Web user guide bu WELLTECR Figure 6 2FXS ATA LAN Mode Bridge VPN System Information WAN Port Link Status UP Type Fixed IP Client IP Address 61 62 236 68 Subnet Mask 255 255 255 0 Default Gateway 61 62 236 54 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 MAC ID 00 11 22 33 44 55 VPN PPTP L2TP ype PPTP 4 IP Address 192 168 50 17 System Information Firmware Version 1012090 Update Date 2011 01 03 DSP Version LE 1007290 System Up Time 0 day s 0 hour s 1 minute s Network Link Up Time 0O day s 0 hour s 1 minute s Current Time 2011 01 03 16 40 Register Information Phone 1 Realm 1 Status Realm 2 Status Realm 3 Status Realm 4 Status Realm 5 Status Phone 2 Not Registered Not Registered Not Registered
27. 1 Instruction 1 When the dialing number is like 8613xxxx it matched Rule gt 8613 so ATA will add prefix 002 in front of 8613 The actual dialing number will be 002 8613 xxx When the dialing number is like 8662xxxx it matched Rule gt 8662 so ATA will add prefix 002 in front of 8662 The actual dialing number will be 002 8662 xxx Instruction 2 When the dialing number is like 002 86xxxx it matched Rule gt 002 so ATA will replace 002 with Prefix 006 The actual dialing number will be 006 86xxxx When the dialing number is like 003 77xxxx it matched Rule gt 003 so ATA will replace 003 with Prefix 006 The actual dialing number will be 006 77xxxx Instruction 3 Drop prefix Disable Replace rule 009 Rule 12 Welltech Technology Co Ltd 26 88 2012 1 2 fiw LTECH ATA Web user guide When the dialing number is like 12xxxx it matched Rule gt 12 ATA will add Prefix 009 in front of 12 The actual dialing number will be 009 12xxxx Instruction 4 When the dialing number is 53789 it matched Rule gt 53 ATA will add Prefix 007 in front of 53 The actual dialing number will be 007 53789 When the dialing number is 3507 it matched Rule gt 35xx ATA will add Prefix 007 in front of 3507 The actual dialing number will be 007 3507 When the dialing number is 2199 it matched Rule gt 21xx ATA will add
28. 206 Number 1747643364 Index 2 Name test Number 8123478944566 figure1 index Name OT Number Action 301 301 192 168 1 2 Delete 206 1 747643364 Delete test 8123478944566 Delete A wn a Delete figure1 Illustration 1 pick up phone and dial 301 in Index 1 find the name was matched 301 so ATA will use Number gt 301 192 168 1 2 to dial out Illustration 2 when you pick up phone and dial 206 ATA will follow the phone book setting to dial 1747643364 Illustration 3 Index 3 Name test the name is not number type so it can t be used for speed dialing Welltech Technology Co Ltd 18 88 2012 1 2 Purwa ATA Web user guide 6 2 Dial Plan setting 6 2 1 Function Provide dial rule and define proxy server prefix code 6 2 2 Instructions Figure 1 Suitable for 1FXS and 2FXS ATA Dial Plan Setting index Drop prefix Prefix e Re FE Disable v Disable v Disable v A w N Disable v index Dial Now Rule 1 2 3 4 5 6 7 8 Realm 1 prefix 1 Realm 2 prefix ra Realm 3 prefix F Realm 4 prefix 4 Realm 5 prefix a Auto Dial Time 5 sec Use as send key Enable v Figure 1 field Description Index Index number There are
29. 4 rules to support dial rule for Add drop and replacement features Drop Prefix Default setting is Disable Add Prefix number feature When it was set to Enable and the number match the Rule number ATA will replace the Rule field number and use Prefix field number instead Disable Add prefix number in front of the called number when called number match Rule number Welltech Technology Co Ltd 19 88 2012 1 2 fin WELLTECHW ATA Web user guide field Description Enable Replace Rule number to Prefix number when called number match Rule number Prefix Added or replace number For numbers only and maximum length is 8 digits Rule Define number manipulation rule It can be numbers or signs x The means Or x means any numbers which are from 0 9 Maximum length is 40 digits NOTE The first digit can t be 0 if it is 2 digits number Index Index number There are 8 dial rules to enter Dial Now Rule Automatic dialing Now immediately When the dialing rule matches the contents in this column the automatic dialing function will be executed without waiting for press or Auto Dial Time to dial out Both numbers and symbols can be entered The number length is 80 digits Symbols only allow and x represents or x any number between 0 9 Note The 1st digit number can not be set to 0 because 0 will not de
30. 6 68 Subnet Mask 255 255 255 0 Default Gateway 61 62 136 254 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 MAC ID 00 2a 10 12 08 b0 VPN PPTP L2TP Type PPTP IP Address 192 168 50 17 System Information Firmware Version 1012090 Update Date 2011 01 03 DSP Version AC 1008170 System Up Time 0 day s O hour s 13 minute s Network Link Up Time 0 day s 0 hour s 2 minute s Current Time 2011 01 03 16 32 Register Information Phone 1 Realm 1 Status Not Registered Number Realm 2 Status Not Registered Number Realm 3 Status Not Registered Number Realm 4 Status Not Registered Number Realm 5 Status Not Registered Number Figure 2 Welltech Technology Co Ltd 10 88 2012 1 2 Parra ATA Web user guide Figure 3 FXS FXS PSTN FXS FXO LAN Mode NAT System Information Link Status UP Type DHCP Client IP Address 192 168 50 10 Subnet Mask 255 255 255 0 Default Gateway 192 168 50 1 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 MAC ID 00 09 f3 77 8e 38 LAN Port IP Address 192 168 123 1 MAC ID 00 09 f3 77 8e 38 System Information Firmware Version 1012090 Update Date 2010 12 16 DSP Version LE 1007290 System Up Time 0 day s 7 hour s 23 minute s Network Link Up Time 0 day s 7 hour s 23 minute s Current Time 2010 12 16 18 37 Register Information Phone 1 Realm 1 Status Not Registered Number Realm 2 Status Not Registered Number Realm 3 Status Not Registered
31. 7 5 2 Instruction SNTP Setting Active Primary Server Secondary Server Time Zone synchronize Time Daylight Saving Time DST Offset DST Start Date DST End Date Enable x north america pool ntp org lasia pool ntp org GMT 08 v 00 M hh mm hour Disable v 1 hour jan Day of Month w o1 oo Jan Day of Month vfo v 00 v Field Decription Active Primary Server manually Default is Enable This feature is to Enable Disable Time Sync feature When it was set to Disable you may configure Time Default is north america pool ntp org to be Primary time sync server It can be IP address or Domain Name The format is XXX XXX XXX XXX Maximum length is 63 digits Synchornize Time Secondary Default is asia pool ntp org to be Secondary time sync server It Server can be IP address or Domain name The format is XXX XXX XXX XXX Maximum length is 63 digits Time Zone Deafult is GMT 08 00 hh mm Provide option is 00 13 hour 00 15 30 45 minute Default is 24 Hour To configure the interval time for Time Sync The option are 1 min 5 min 30 min 1 hour 3 hour 6 hour 12 hour 24 hour Daylight Saving Default is Disable Define the Daylight Saving time When you Time set to Enable time will be adjusted by the Daylight Saving parameter DST Offset Default is 1 Hour Adjust the Daylight S
32. A Web user guide Field Decription New username Enter new username which can be Numbers or strings maximum length is 32 digits New password Enter new password which can be Numbers or strings maximum length is 32 digits Confirmed password New username Enter new password to confirm the password setting Input new username Can be Numerals or strings maximum length is 32 bytes New password Input new password Can be Numerals or strings maximum length is 32 bytes Confirmed password Input new password to confirm the password setting Reset button Submit button Save the configuration Clear the configuration Welltech Technology Co Ltd 79 88 2012 1 2 fin WELLTECH ATA Web user guide 10 7 Tones Setting 10 7 1 Function Tone setting provides Dial Ring Back Busy Congestion Ring Call Waiting Tone and Multi Frequency conf 10 7 2 iguration Instruction Tones Setting ial Ring Back Busy _ Congestion Ring Call Waiting Cadence On o Hi Tone Freq 440 480 620 620 480 440 Lo Tone Freq 350 440 480 480 440 350 Hi Tone Gain 4522 2261 2261 2261 15360 2261 Lo Tone Gain 4522 2261 2261 2261 15360 1130 On Time 1 lo x10ms 200 50 30 200 30 Off Time 1 lo x10ms 400 50 20 400 20 On Time 2 0 x10ms 0 lo 0 oe
33. Diff Serv Range 0 63 SIP QoS Default is 40 Define SIP QoS Diff Ser function Diff Serv Range 0 63 Use DNS SRV Default is Disable When you enable the DNS SRV ATA will run DNS Standard query SRV_sip upd xxx xxx xxx Send Keep Alives Default is Disable If ATA was installed behind the NAT it should Packet keep the channel available so it has to send the keep alives packet to keep this channel Enable Use UDP format to send For instance UDP Source Port sip Destination Port xxxx Keep Alives Default is 60 seconds Define the Keep Alives sending time Period period Range 15 250 seconds Jitter Buffer Default is 1 Range 0 32 A jitter buffer temporarily stores arriving voice packets in order to minimize delay variations to improve voice quality SIP Server Type Default is General Option General Asterisk BroadWorks Nortel Xener Vodtel SKTelink Add URL Default is Disable ATA will put user phone in register header user phone when you set to enable Register Add URL Default is Disable ATA will put user phone in Invite header user phone when you set to enable Invite Send SIP PRACK Default is Disable If you need to support PRACK please enable of Proxy this function Only Accept Call Default is Disable Configure to accept incoming call which is From Proxy registered to SIP Proxy server Reject incoming call when use IP direct calling Submit button Save the c
34. FXO port Counter automatically and provide second dial tone after pre configured ring cycles count arrived Ring count option is 0 to 8 PIN Code Default is Disable This feature provides Password PIN Code authorization when ATA receive an incoming call ATA will require PIN code authorization when call is coming to ATA The calling user has to enter PIN code for ATA to verify before call was established Note 1 This function Only work with Auto Answer function 2 When an incoming call from FXO port ATA only accepts PIN code DTMF via In Band and RFC2833 However an incoming call from SIP IP trunk PIN code DTMF ATA only accepts RFC2833 Not support In Band DTMF PIN Code Number Configure PIN code password Allow number only and Maximum length is 31 digits When ATA answers an incoming call the caller has to enter pre configured PIN code number for ATA to verify If password is correct caller will hear second dial tone and continue to dial Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 38 88 2012 1 2 fin WELLTECH ATA Web user guide 6 5 Volume 6 5 1 Function This function is to adjust volume of microphone and speaker at analog phone set and FXO port s volume as well 6 5 2 Instruction Figurel ATA171plus ATA 171 ATA172plus ATA 172 ATA 171P Volume Setting Handset Volume Handset Gain 10 m
35. Format xxx xxx xxx xxx Maximum length is 15 digits Welltech Technology Co Ltd 41 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription DNS Server2 Default 168 95 1 1 It can be IP address or Domain Name Format xxx xxx xxx xxx Maximum length is 15 digits MAC ID Display MAC address information Host Name Default product name Numbers or strings are both acceptable Length 15 digits PPPoE User Name Provides user s name of PPPoE Server it can be numbers or strings Length is 32 digits PPPoE Password Provides password of PPPoE Server it can be numbers or strings Length is 32 digits PPPoE Service Define Service Name It can be IP address or Domain Name Name Length 32 digits NOTE This name is provided from ISP If you don t know it please don t change anything here PPPoE AC Name Define AC Name It can be IP address or Domain Name Length 32 digits NOTE This name is provided from ISP If you don t know it please don t set anything here Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 42 88 2012 1 2 fin WELLTECH ATA Web user guide 7 2 DDNS 7 2 1 Function Dynamic DNS provides a residential user s Internet gateway that has a variable often changing IP address with a well known hostname resolvable through standard DNS User Name
36. LLTECH ATA Web user guide Firmware Type Field Decription File Path FTP configuration files localtion It can be numbers or strings Maximum length 63 digits For Instance 123 to setup file folder An has to enter behind Check new Default is Scheduling Only Option Power on and Schedule Scheduling Only Power on and Scheduling When the ATA boot up or reach the schedule time it will check if there is any upgraded firmware Scheduling ATA will follow the Next Update Time to check if there is any new version for the upgrade Power on and Scheduling ATA doesn t upgrade firmware automatically when it finds new version ATA will prompt an alert tone to user And User must upgrade it manually Scheduling Default is 14 day Define the scheduling date Minimum 1 day Date Maximum 30 days Only numbers are accepted length 2 digits Scheduling Default AM 00 00 05 59 AM 00 00 05 59 AM 06 00 Time 11 59 AM 12 00 17 59 AM 18 00 23 59 is available Automatic Default is Notify only Update Option Notify only Automatic Notify only ATA will not auto update when it found new version ATA will prompt an alert tone to user Automatic ATA will auto update when it finds new version Firmware File Default Product model Can be numbers or strings maximum Prefix 8 digits Next Update Showing the next update time Time Date calculation starts from next da
37. LTECH ATA Web user guide Field Decription Lo Tone Freq Default 350 Only numerals are acceptable Data range O 4096 Maximum length 4 bytes Hi Tone Gain Default 4522 Only numerals are acceptable Data range O0 65535 Maximum length 5 bytes Lo Tone Gain Default 2261 Only numerals are acceptable Data range 0 65535 Maximum length 5 bytes On Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Ring Ring tone configuration Candence On Default is enable Hi Tone Freq Default 440 Only numerals are acceptable Data range O 4096 Maximum length 4 bytes Lo Tone Freq Default 350 Only numerals are acceptable Data range 0 4096 Maximum length 4 bytes Hi Tone Gain Default 4522 Only numerals are accep
38. NVITE requests and INVITE responses Range 8000 127000 Data length is 6 digits B 64 x SIP T1 INVITE transaction timeout timer F 64 x SIP T1 non INVITE transaction timeout timer H 64 x SIP T1 Wait time for ACK receipt SIP Port Range of phone 1 Default is 5060 5060 Define Phone 1 SIP local port start and end port Range 1024 40000 NOTE 1 Both fields can be same or a range 2 SIP port was used by two continuous ports If SIP port was entered at 5060 two ports at 5060 and 5061 were used in reality 3 All ports are unique and can not be duplicate RTP Port Range of phone 1 Default is 20000 20000 define Phone 1 RTP port start and stop Range 1024 40000 NOTE 1 Both fields can be same or a range 2 RTP port was used by two continuous ports If RTP port was entered at 20000 two ports at 20000 and 20001 were used in reality 3 All ports are unique and can not be duplicate SIP Port Range of phone 2 Default is 5062 5062 Define Phone 2 SIP local port start and end port Range 1024 40000 NOTE 1 Both fields can be same or a range 2 SIP port was used by two continuous ports If SIP port was Welltech Technology Co Ltd 61 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription entered at 5062 two ports at 5062 and 5063 were used in reality 3 All ports are unique and can not be duplicate RTP Port Range of phone 2 Default
39. Prefix 007 in front of 2199 The actual dialing number will be 007 2199 Instruction 5 When the dialing number is 00 01 02 99 it matched Dial Now Rule gt xx ATA will dial out immediately When the dialing number is 00 01 02 99 it matched Dial Now Rule gt xx ATA will dial out immediately When the dialing number is 110 111 112 119 it matched Dial Now Rule gt 11x ATA will dial out immediately When the dialing number is 123456 it matched Dial Now Rule gt xxxxxx ATA will dial out immediately Example 2 PSTN feature code function Step 1 In Dial Plan Setting page the configuration is Auto PSTN Backup Enable PSTN feaure Code 22 See Figure 2 Auto PSTN backup Enable v PSTN feature code 22 Figure 2 Description 1 When ATA registered to SIP Server fail its FXS phone line was forced to connect with PSTN line when user is going to make a call The Dial Tone was provided from PSTN line instead Description 2 When ATA registered to SIP Server successfully press dial code 22 from analog phone set to force ATA switch to PSTN line manually The Dial Tone was provided from PSTN line instead Example 3 Routing function Step 1 In Dial Plan Setting page configure Routing Type FXO Routing Rule D007 009 0800 See Figure 3 Routing Type FXO v Routing Rule D007 009 0800 Figure 3 Description 1 When dialing these digits 0800024365 it matched
40. RNING ALL User Changeable Function Factory Reset 198 None NONDEFAULT SETTINGS WILL BE LOST including network and service provider data Enable PPTP System will automatically reboot and asics client oer Notie PPTP client will be enabled Disable PPTP System will automatically reboot and Funen client ial Note PPTP client wll be disabled F System will automatically reboot and Function Enable VLAN 118 None VLAN will be enabled System will automatically reboot and Function Disable VLAN 1194 None VLAN will be disabled F Enable Call System will automatically reboot and Function Waiting 1384 Nene Call Waiting will be enabled Disable Call System will automatically reboot and Funotigii Waiting PO None Call Waiting will be disabled Enable System will automatically reboot and Fanchon Anonymous se None Send Anonymous CID was enabled F Disable System will automatically reboot and Huncon Anonymous rials None Send Anonymous CID was disabled This feature was only performed f om during a phone call For ATA 171M Paseo Bind Trafister FSL Nong this will transfer the current IP line to another IP line Only be performed in a phone call conversation For ATA 171M this Function Attendant Transfer 511 None will transfer the line to IP from PSTN must be in IP mode to execute this command F ncti 3 way calling IP 5124 None Only be performed in a phone call Conference conversation Only be performed in a phone call conversa
41. Rings sd No Answer of PSTN 0800024365 1 M Phone 1 Figure 5 STEP 2 Route an SIP IP incoming call to FXO port to dial PSTN number according to configuration contents of Forward Type and Forward Number when ATA has received configured Ring cycles and nobody answer this call Example 2 Hotline Feature Dial a hotline number STEP 1 Go to Call Service Setting page and configure Forward Type Enable Hot Line number 82341234 Delay 3 See Figure 6 Hotline Type Hotline Number Enable v 82341234 0 Phone 1 Figure 6 STEP 2 Dial number according to configuration contents of Hotline Number when ATA pickup handset and wait for Delay time was expired before dialing any digits Dial an IP Address STEP 1 Go to Call Service Setting page and configure Hotline Type Enable Hot Line number 192 168 50 4 Delay 3 See Figure 7 Hotline Type Hotline Number Enable 192 168 50 4 2 Phone 1 Figure 7 STEP 2 Dial IP address directly according to configuration contents of Hotline Number when ATA pickup handset and wait for Delay time was expired before dialing any digits Welltech Technology Co Ltd 34 88 2012 1 2 fhiweuacaY ATA Web user guide Example 3 DND feature Do Not Disturb Reject incoming call at assigned time interval STEP 1 Go to Call Service Setting page and configure DND Type Period From 18 15 To 22 20 See Figure 8 Period Y From 18 hs
42. TA will show the incoming call Caller ID when you are on line busy Note Your analog telephone set MUST support proper Caller ID Type II mode to show CID number T 38 FAX Default is Enable to support T 38 FAX transmission function T 38 Default codec is G 711 u Law enable to support T 38 FAX pass Pass through through ATA only uses codec either G 711 u law or G 711 a law codec to transmit FAX over T 38 protocol FXO Setting FXO interface configuration Welltech Technology Co Ltd 37 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription Auto Answer Default is Disable Define an incoming call at Auto Answer method There are configuration option Disable IP In FXO In Both and Trunk Gateway IP In IP incoming call auto switch to FXO port after pre configured Ring Cycles was expired FXO In PSTN incoming call auto switch to IP SIP call after pre configured Ring Cycles was expired Both IP or FXO incoming call auto switch to FXO or IP correspondant after pre configured Ring Cycles was expired Trunk Gateway ATA forwards an IP incoming call from SIP Proxy to FXO port directly This is an VoIP termination to local PSTN feature NOTE Trunk Gateway function doesn t work with PIN Code authentication function when terminate an call to FXO port Both SIP Server and ATA 171M MUST support this feature to implement it Auto Answer Default is 3 rings ATA will switch to SIP IP port or
43. To 22 20 hh mm Phone 1 Figure 8 STEP 2 ATA rejects an incoming call when it happened at assigned time interval according to configuration at DND Time Reject all incoming call STEP 1 Go to Call Service Setting page and configure DND Type Always See Figure 9 DND Type Ce DND Line Always From 0 To hh mm Phone 1 Figure 9 STEP 2 ATA rejects all incoming calls without any exception Example 4 Alarm Feature Reject incoming call at assigned time interval STEP 1 Go to Call Service Setting page and configure Alarm Type Enable Alarm Time 21 00 See Figure 10 Enable v 21 lo hh mm Phone 1 Figure 10 STEP 2 ATA s analog phone set start Ring when 21 00PM arrive daily and it is lasting for default time i e default time is 1 minute It stops ring immediately when you pickup handset Welltech Technology Co Ltd 35 88 2012 1 2 Purvi LTECH ATA Web user guide 6 4 General 6 4 1 Function Provide Caller ID Call waiting auto answer and T 38 FAX transmission 6 4 2 Instruction Frigure 1 1FXS ATA171plus ATA 171 2FXS ATA172plus ATA 172 and1FXS 1PSTN ATA 171P General Setting Call Waiting Ring Timeout Caller ID Scheme Enable v 60 sec FSK Bellcore CID Type II Enable v T 38 FAX Enable v T 38 Pass Through Codec uLaw Figure 1 Field Description Call Waiting Enable Disable call waiting function This feat
44. ase Time Default is 1 0 day hour Define the DHCP IP lease time The range is 0 0 12 23 Data length is 2 digits Welltech Technology Co Ltd Submit button Save the configuration Reset button Clear the configuration 49 88 2012 1 2 furw LLTECRP ATA Web user guide 8 2 DMZ amp MAC Clone 8 2 1 Function Provide DMZ and MAC Clone configuration 8 2 2 Instruction DMZ and MAC Clone Setting DMZ Type Assigned IP Address MAC Clone Type Disable v lo 0 0 0 Disable v Field Decription DMZ Type Default is Disable When set to Enable all network packages will be sent to the IP address which was defined from Assigned IP Address Assigned IP Default is 192 168 123 150 IP format iS XXX XXX XXX XXX Address Data length is 15 digits MAC Clone Type Default is Disable When it was set to Enable ATA will get your PC computer s MAC address Option Disable Enable NOTE 1 When use MAC Clone function ATA must set LAN Mode to NAT mode and enable DHCP server 2 You have to login ATA to configure via LAN port to set the MAC Clone function Submit button Save the configuration Reset button Clear the configuration NOTE If you want to resume your original MAC address please use Restore Default Setting command at Webpage configuration Welltech Technology Co Ltd 50 88 2012 1 2 fhiweuaca ATA Web user g
45. aving time Option 2 hour 1 hour 1 hour 2 hour DST Start Date Configure the Daylight Saving start time Option Day of Month Week of Month DST End Date Configure the Daylight Saving start time Option Day of Month Week of Month Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 48 88 2012 1 2 fhiwes LTECH ATA Web user guide 8 NAT Provide LAN DMZ and MAC Clone Virutal Server function 8 1 LAN 8 1 1 Function Provide LAN port configuration setting including DHCP server function 8 1 2 Instruction LAN Setting LAN Mode NAT LAN IP Address 192 168 123 1 LAN MAC ID DHCP Server Active Enable v Assign IP 150 200 1 254 Lease Time 1 0 DD HH DD 0 12 HH 0 23 Field Decription LAN Mode Default is NAT mode The option is Bridge and NAT mode Bridge When set to Bridge WAN and LAN stay at the same network segment NAT WAN and LAN is different network segment LAN port works as DHCP server and provide provide IP address LAN IP Address Default LAN port IP is 192 168 123 1 IP lendth is 15 digits LAN MAC ID Display LAN port MAC ID address DHCP Server Default is Enable ATA will assign IP address to DHCP clients at Active LAN port Assgin IP Default is 150 200 Define IP address range to DHCP clients The range is 1 254 IP address format is 3 digits Le
46. be IP Address or Domain Name Format xxx xxx xxx xxx Maximum length 63 digits HTTP File Path HTTP configuration files localtion It can be numbers or strings Maximum length 63 digits For Instance 123 to setup file folder An has to enter behind FTP Server Define the FTP Address which can be IP Address or Domain Name Format xxx xxx xxx xxx Maximum length 63 digits FTP Username FTP server user name Data length is 63 digits FTP Password FTP server user password Data length is 63 digits FTP file Path Next config time FTP configuration files localtion It can be numbers or strings Maximum length 63 digits For Instance 123 to setup file folder An has to enter behind Display the next configuration date and time If the estimated date was expired ATA will visit assigned server to check the updated information Note If you need to use this feature please set the Auto Update feature turned on The Next Configuration time will be synchronized in the Next Update time Reset button Submit button Save the configuration Clear the configuration Welltech Technology Co Ltd 68 88 2012 1 2 fin WELLTECH 10 3 Auto Update 10 3 1 Function Provide rom format file upgrade 10 3 2 Instruction Auto Update Setting Type TFTP Server TFTP File Path HTTP Server HTTP File Path FTP Server FTP User Name FTP Password FTP File Path
47. content 0800 of Routing Rule ATA dials these digits from FXO port Description 2 When dialing these digits 00986123456 it matched content 009 of Routing Rule ATA dials these digits from FXO port Welltech Technology Co Ltd 27 88 2012 1 2 fin WELLTECH ATA Web user guide Description 3 When dialing these digits 00782280220 it matched content D007 of Routing Rule ATA will drop 007 first and then dial remaining digits 82280220 from FXO port 6 3 Call Services 6 3 1 Function Provide Forward Hotline DND Alarm function 6 3 2 Instruction Example 1 1FXS 2FXS and 1FXS 1PSTN ATA devices Figure 1 1FXS for ATA171 plus and ATA 171 Call Service Setting Forward Type Forward Number Rings sd Disable v Phone 1 Hotline Type Hotline Number Disable v 192 168 50 19 0 Phone 1 DND Type DND Time DND Line Disable v From To hh mm Phone 1 Alarm Type Disable v hh mm Phone 1 Figure 1 Field Decription Forward Type of phonel Default is Disable To configure Phone 1 forward type Here provides 5 options Disable All unconditional Busy No Answer Busy or No Answer NOTE Please make sure your service provider support this forward function Forward Number of phonel To configure Phone 1 forward number simply dial number or digit string The maximum digi
48. ction timeout timer H 64 x SIP T1 Wait time for ACK receipt phone SIP Port Range of 1 Default is 5 060 5060 Define Phone 1 SIP local port start and end port Range 1024 40000 NOTE 1 Both fields can be same or a range 2 SIP port was used by two continuous ports If SIP port was entered at 5060 two ports at 5060 and 5061 were used in reality 3 All ports are unique and can not be duplicate phone RTP Port Range of 1 Default is 20000 20000 define Phone 1 RTP port start and stop Range 1024 40000 NOTE 1 Both fields can be same or a range 2 RTP port was used by two continuous ports If RTP port was entered at 20000 two ports at 20000 and 20001 were used in reality 3 All ports are unique and can not be duplicate Welltech Technology Co Ltd 58 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription Hold by RFC Default is 0 0 0 0 Configure to Hold on a call and define hold message sending method via SIP command When it was Enable Connection Information c IN 1P4 xxx xxx xxx xxx use IP address to set Option Disable Typel Sendoloy Type2 inactvie DTMF Mode Default is RFC 2833 Option InBand RFC2833 SIP Info RFC2833 Inband SIP Info Inband RPort Default is Disable When you set to Enable the Message Header will include Rport information Voice QoS Default is 40 Define Voice QoS Diff Ser function
49. d Description key Enable When ATA received it will dial out immediately no need wait for the auto dial out time Disable follow Auto Dial Time time to dial out Auto PSTN Default is Disable Provide PSTN auto backup function When SIP backup account register to SIP Server fail FXS port was switched to PSTN line automatically if ATA was set to enable In the meantime the FXS port s dial tone was generated from PSTN line Please make sure the PSTN line connect to ATA correctly if you want to enable this function PSTN feature Code Default is 0 This code is to switch the route to PSTN port manually When you dial 0 you will hear dial tone from PSTN line and the call will dial out through PSTN line Maximum length is 7 digits It only allows to enter number and digits Routing Type Default is Disable OFF and provide IP FXO and Disable features The call behavior is based on Routing Rule According to the routing rule IP or FXO dail out function can be selected Routing Rule D is a dropping prefix function and is used to add multiple routing rule Example Routing rule is D007 009 1 When the entered numbers start with 007 such as 00782280220 the condition is satisfied with D007 The routing rule first drops 007 and replace the numbers with 82280220 Then refer to the Routing To setting to select the dialing route 2 When the entered numbers start with 009 such a
50. d STUN function 9 1 Service SIP register setting 9 1 1 Function Provide 5 register accounts 9 1 2 Instruction Figure 1 1FXS ATA171plus ATA 171 1FXS 1PSTN ATA 171P and 1FXS 1FXO ATA 171M Service Domain Setting Realm No 1 Active Disable v Display Name Phone Number Authentication ID Authentication Password Domain Server Proxy Server Outbound Proxy Subscribe for MWI Disable v Figure 1 Field Decription Active Default is Disable This account will be active when you set to enable Display Name Account s display name which can be numbers or strings Maximum length is 31 digits Phone Number Account s phone number which only can be numbers Maximum length is 31 digits Authentication ID Account s register ID which can be numbers or strings Maximum length 47 digits Authentication Account s register password which can be numbers or strings Password Maximum length is 31 digits Domain Server Input Domain Server It can be IP Address or Domain Name Format XXX XXX XXX XXX Maximum length is 63 digits If Welltech Technology Co Ltd 52 88 2012 1 2 Parra ATA Web user guide Field Decription special Port Address is needed please add it behind For Example nat voiptalk org 5065 Proxy Server Enter Proxy Server information It can be IP Add
51. de firmware Reset Clear the file location information PS It takes 2 or 3 minutes when you start update firmware User can t make call during the upgrade Please don t turn off the power Caution ATA171plus ATA172plus firmware are different with ATA 171 ATA 172 please only use correct firmware for these models Welltech Technology Co Ltd 71 88 2012 1 2 ATA Web user guide fin WELLTECH 10 5 Advanced 10 5 1 Function Provide anonymous call billing signal encryption syslog and FXS FXO parameter function setting 10 5 2 Instruction Figure 1 1FXS ATA171plus ATA 171 2FXS ATA172plus ATA 172 and 1FXS 1PSTN ATA 171P Management Advanced Setting ICMP Not Echo Send Anonymous CID Management from WAN Stop Feature Tone Billing Signal CPC Delay CPC Duration IP Dialing Format Send Flash Event Encryption Type Encryption Key PPPoE Retry Period System Log Server System Log Type FXS Port Country Flash Signal Detect MAX Flash Signal Detect MIN Z Disable v Disable Vi Enable Disable MMI forward block Disable 2 Seconds o x 10 ms 0 120 Type 1 x x x x x vi Disable Disable v 5 Seconds 0 250 L_ Disable b USA vi 60 x 10 ms 4 255 x10 ms 3 12 NET Bandwidth Limit Disable Kbps Figure 1 Field Decription ICMP Not Echo Default is Disab
52. e Management from WAN Enable x Stop Feature Tone Disable MMI forward block Billing Signal Disable v CPC Delay 2 Seconds CPC Duration 0 x 10 ms 0 120 IP Dialing Format Type 1 x x x x x Send Flash Event Encryption Type Disable v Disable v Encryption Key i PPPoE Retry Period 5 gt Seconds 0 250 System Log Server L i a i System Log Type Disable v FXO Port Country UA ti FXO Silence Timeout Bo 1 250 minutes FXO CID forward Disable v Generate Flash Signal for FXO 10 10 ms 9 120 FXS Port Country USA Flash Signal Detect MAX Flash Signal Detect MIN NET Bandwidth Limit Welltech Technology Co Ltd 60 x 10 ms 4 255 7 x 10 ms 3 12 Disable Kbps 74 88 2012 1 2 fn WELLTECH ATA Web user guide Figure 2 Field Decription ICMP Not Echo Default is Disable Enable ping will not reply Option Disable Enable Send Anonymous CID Default is Disable When you set Type 1 or Type 2 ATA will send CID as anonymous to your server Type 1 anonymous anonymous invalid Type 2 anonymous x x x xX Your Register Proxy server must support this function Management form WAN Default is Enable ATA allow web management via WAN port Disable ATA only allow web access vial LAN port Option Disable Enable Stop Feature Default is Disable Tone E
53. e 5 3K function Provide option Disable Enable Silence Default is Disable When you set it to Enable the Voice Active Suppression Detection VAD function will be activated VAD The Silence Suppression is used in telephony to describe the process of not transmitting information over the network when one of the parties involved in a telephone call is not speaking thereby reducing bandwidth usage Echo Cancel Default is Disable Enable Enable the echo cancellation feature Codec Type Define Voice Codec ID G726 16 ID Default is 23 When you select Customer Mode Manual change the ID can be modified Range 95 127 G726 24 1D Default is 22 When you select Customer Mode Manual change the ID can be modified Range 95 127 G726 32 ID Default is 2 When you select Customer Mode Manual change the ID can be modified Range 95 127 G726 40 ID Default is 21 When you select Customer Mode Manual change the ID can be modified Range 95 127 RFC 2833 ID Default is 101 When you select Customer Mode Manual change the ID can be modified Range 95 127 Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 56 88 2012 1 2 fin WELLTECH ATA Web user guide 9 3 Advanced 9 3 1 Function Provide SIP Expire Time SIP RTP Port QoS Register SIP Expire Time Use DNS SRV DTMF User P
54. e automatically if ATA was set to enable In the Welltech Technology Co Ltd 25 88 2012 1 2 faiweuaca ATA Web user guide Field Decription meantime the FXS port s dial tone was generated from PSTN line Please make sure the PSTN line connect to ATA correctly if you want to enable this function PSTN feature Default is 0 This code is to switch the route to PSTN port Code manually When you dial 0 you will hear dial tone from PSTN line and the call will dial out through PSTN line Maximum length is 7 digits It only allows to enter number and digits Submit Save the configuration Reset Clear the configuration 6 2 3 Operate Instruction Example 1 Drop Prefix and Dial Now function Step 1 In Dial Plan Setting page the configuration is Index 1 Drop prefix Disable Prefix 002 Rule 8613 8662 Index 2 Drop prefix Enable Prefix 006 Rule 002 003 004 005 007 009 Index 3 Drop prefix Disable Prefix Replace 009 Rule 12 Index 4 Drop prefix Disable Prefix 007 Rule 53 35xx 21xx Index 1 Dial Now Rule xx xx 11x xxxxxxxx figurel1 ma __Drop prefix Prefix Rule OO Disable 002 8613 8662 2 Enable v 006 002 003 004 005 007 009 3 Disable 009 12 Disable v 007 53 35xx 21Xx Index Dial Now Rule 1 xt exx Txsoocxy 2 figure
55. ech Technology Co Ltd 36 88 2012 1 2 faiweuacay ATA Web user guide Figure2 1FXS 1FX0O ATA 171M General Setting Call Waiting Ring Timeout Caller ID Scheme Enable v 60 w sec FSK Bellcore CID Type II Enable v T 38 FAX Enable v T 38 Pass Through Codec julaw FXO Setting Auto Answer Disable v Auto Answer Counter 3 x PIN Code Disable v PIN Code Number Figure 2 Field Decription Call Waiting Enable Disable call waiting function This feature allows you to answer the incoming call when you are on line at another call When you are on line to talk an Du Du sound was heard to remind you there is an incoming call To answer this incoming call simple activate HOLD feature to hold existing call and answer incoming call Ring Timeout Default setting is 60 seconds ATA responses Busy tone SIP command 486 to caller when nobody answer incoming call once configured time was expired The configured timeout option is 20 40 60 80 120 180 and 240 seconds Caller ID Scheme Default is Disable The Caller ID supports the following protocol FSK Bellcore DTMF Caller ID before first Ring CID J apan DTMF Brazil and DTMF Denmark mode Note Your analog telephone set MUST support proper Caller ID mode to show CID number CID Type II Default is Disable If ATA has enabled both CID Type II and Call Waiting function A
56. em hh mm Each field allows to enter 2 digits number only Alarm Type of Default is Disable Configure Phone 2 alarm function When you phone 2 set to enable phone 2 will Ring according to pre configured see next row how to configure alarm time alarm time The alarm Ring last for 1 minute To cancel alarm setting simply pickup handset and hand up The default ring time is 1 minute Alarm Time for Default is 0 0 Hour Minute The time format is 24 hours phone 2 system hh mm Each field allows to enter 2 digits number only Submit Save the configuration Reset Clear the configuration Figure 3 FXS FXO ATA 171M device Call Service Setting Forward Type Forward Number Rings ss Disable x Phone 1 Hotline Type Hotline Number _ Disable 192 168 50 19 0 Phone 1 DND Type DND Time DND Line Disable v From To hh mm Phone 1 Alarm Type Disable v hh mm Phone 1 Figure 3 Welltech Technology Co Ltd 31 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription Forward Type of phonel Default is Disable To configure Phone 1 forward type Here provides 5 options Disable All unconditional Busy No Answer Busy or No Answer NOTE Please make sure your service provider support this forward function Forward Number of phonel To configure Phone 1 forward number simply dial number or digit string The maximum digit lengt
57. eptable Welltech Technology Co Ltd 80 88 2012 1 2 Pu WELLTECHD ATA Web user guide Field Decription Data range 0 999 Maximum length 3 bytes Ring Back Ring back tone configuration Candence On Default is enable Hi Tone Freq Default 440 Only numerals are acceptable Data range O 4096 Maximum length 4 bytes Lo Tone Freq Default 350 Only numerals are acceptable Data range 0 4096 Maximum length 4 bytes Hi Tone Gain Default 4522 Only numerals are acceptable Data range 0 65535 Maximum length 5 bytes Lo Tone Gain Default 2261 Only numerals are acceptable Data range 0O 65535 Maximum length 5 bytes On Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Busy Busy Tone configuratio
58. er Enable Replace Rule number with Prefix number when called number match Rule number Welltech Technology Co Ltd 24 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription Prefix Added or Replace number It only allows to enter number Maximum data length is 8 digits Rule Define number manipulation rule It can be numbers or signs x The means Or The x means any numbers which are from 0 to 9 Maximum data length is 40 digits Note The first digit can t be 0 if it is 2 digits number length Index Index number There are 8 entries to configure Dial Out immediately Dial Now Rule Automatic dialing When the dialing rule match contents in this row the automatic dialing function will be executed without waiting for press and Auto Dial Time to dial out Both Numbers or symbols can be entered The number length is 80 digits Symbols It was allowed to enter and x represents or x any number between 0 to 9 Note 1st digit can not be set to 0 because 0 does not determine as the Dial Now Rule If the Dial Now is set to Oxxxx the system will not follow the dialing rule to dial out Realm 1 prefix Default setting is 1 When you dial 1 called number ATA will switch to the first account and dial out the called number Maximum data length is 7 digits Realm 2 prefix Default setting is 2 When you dial 2 called number
59. er QoS Call Function e Tos field Call Hold NAT Traversal Call Waiting Call Forward Caller ID 3 way conference e STUN Configuration Welltech Technology Co Ltd 4 88 2012 1 2 fin WELLTECH ATA Web user guide DTMF Function Web Browser e In Band DTMF Telnet e Out of Band DTMF e IVR Keypad e SIP Info Firmware Upgrade SIP Server e Registrar Server Five SIP accounts e Outbound Proxy 4 Keypad Interface from analog phone set of ATA You can use analog phone set s keypad to operate configure and listen to configuration IVR play voice messages in English at ATA without using web interface The following table is the access code of each feature Off Hook analog phone and dial IVR access code and follow the voice prompts to configure ATA IP address and other features Group IVR Action IVR access code Parameter s Notes Press 0 can route your call to PSTN F Dial out from Line from analog phone set directly Function PSTN Line 0 Nong you can dial out from PSTN Line For model ATA 171P and ATA 171M only After you unlock keypad setting you Function Unlock k at 190 None may start to configure ATA from setting k eypad After you hear Option Successful Function Reboot 195 None from IVR message please hang up The system will reboot automatically System reboot automatically WA
60. ereerererereresesesesisesesesesesesesintntntntntnnstnesnsenennnns 19 6 3 Call Servi CES s aonn aean A Ee AEN EEE da EAEN 28 6 4 General eramen naran etd asd ete 36 6S VOUM e cnitcaiccstadsemindnkandananiis ain Aiea ien 39 7 Network CNVIFONMENLK ccc ccc cccsscsesscsscsscssesecsccsscsecsecsecseesecssesecsccaecascsseascsecseenaees 41 7 1 WAN network setting vosissciciuansssccnisesvevunssniet nethontsinensecesbaonevusasnsitounisndendsensbesnys 41 T2 DDNS eae E E T O ne St eth See ee 43 T3 NIAN e a EENE OE A E TA NE 45 7 4 VPN PPTP L2TP connection esseseesesesessessssessssessessresressrenrssressreneesrrssesseesrns 47 PISNI P oaea a E E O A a 48 BPI cease pes sa E E E E AE E E E 49 8 NEE NG redaanonnrsa o a e a T EA 49 8 2 DMZ amp MAC AONE veo casintvcoueSanstwascwudodesdevtendinindeuatd euatupsanvadsssnubesarhincnatevueeussnudasasd 50 8 3 Virtual Serve aiknciatniteianaiaciainwiiaunetatiad besa 51 9 SIP S Ettinger E A ae 52 9 1 Service SIP register setting oe ceccecsscsecsseescsseesessecsessecseesecsseeenes 52 972 Glo aaien e e EE E A A E E e E MERIT emt 55 9 3 AdVANCE Q oconiroisin n n EA T ENE ae 57 9 4 STUN STUN amp Froce configuration ssssssessssssssssrssrsssrssrsreririsrsrssrsrerees 64 10 Management Advanced COnfiguratiOn ccc cccesccsecsessessceeseeecseeseescseeseeeees 65 T0 1 Status Re 0 9 Repeater ee nen E en ere See etree re 65 10 2 Auto Configurati Nassiet irens ekiri iniaa EE KEKi 67
61. fini WEI LTECH ATA Web User Guide VolP ATA series ATA1 71plus ATA172plus ATA 171 ATA 172 ATA 171M ATA 171P User Guide Released Date J anuary 2012 Firmware Version V 300 fiw LTECH ATA Web user guide 1 MAP WT NL ON oiin Saa a gage ap nace R Carat eam oe 4 2 Hardware OVET SW iisish ccs necsvsnsnieusvasnnduitnewtintnnianicebsianntonstanibdsinesTedassues bdentanntiaatebuedsiseeteessites 4 2 1 TWO RJ 45 Network interface oo ccc cccsscscssesscscssesscseeseeecseeseesesseseeeeseeseeees 4 2 2 One or two RJ 11 analog telephone jack and line interfaces 4 2 3 LED Ndicati OMe eassa a aa ii 4 3 Software OVervieW ssesiitesierisiirsiirissiiiiiiserii disa sosiunsenvioisesssneuacwdensseousiuntenvens site 4 4 Keypad Interface from analog phone Set Of ATA Qu ccc cccccseseessssetecseeseeeeseees 5 5 Instruction of Web Environment uc ccccesccscesecssesecsscsscssceecsscesecsscssesecseeseesseeees 7 5 1 B 1 Loa amp Ree n On PRE PLT AR nV 7 5 2 ATA network CONNECTION 2 0 0 ec ccccscsseescsseescssecseesecseesecsscsecssccecssecseesscaeeseensees 7 5 3 Login VOIP Web Dade ananciinnsvoicormssdnndouiadnasoaswauadaeaan 7 5 4 VolP main setting PAGE ic ciscesasnscsnsiacieseayscevsneoteasasseeeinioreodaadee aiiin 7 5 9 System Informatio Nesses e aeaa a iiit 9 MPMI aoon n I E eee E 17 6L Phone BOOK iccciatierccdteedectiatcnresidee neste Be eo eines A OA EA EA 17 6 2 Dial Plan setting s sssssssssesesessssss
62. gth 3 digits System Log Sending ATA debug message to System Log Server which can be Server an IP Address or Domain Name Address Format XXX XXX XXX XXX Maximum length 63 digits System Log Type Default is Disable Define Syslog type and Log messages Option Disable Call Statistics General Debug Call Statistics General Debug SIP Debug Call Statistics SIP Debug General Debug SIP Debug All FXO Port Coutry Default is USA country telephony specification To select FXO Port impedance of the analog telephone by different countries Welltech Technology Co Ltd 75 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription FXO Silence Time FXO CID forward Default to 30 minutes Configure FXO silence time setting to release FXO port automatically Time length is 1 to 250 minutes Default is Disable When FXO port received an incoming call ATA will forward this call as well as caller ID to IP side Go to webpage configuration to enable the setting at Phone General gt Auto Answer or Phone Caller Service gt Forward If ATA was set Forward amp Auto answer the CID of incoming call will be forwarded to SIP Server Generate Flash Signal for FXO Default is 10 equal to 100ms Generate Flash Singal for FXO 100ms When the Flash signal lt less than 100 ms it will be regarded as Hook Flash gt longer than 100 ms it will be regarded
63. h is 63 Rings of phone 1 That feature is used for no answer forward only Default is 3 rings When there is no answer after configured rings ATA forward to pre configured number automatically The configuration ring range is 2 to 8 rings This mode only supports Forward Type No Answer Hotline Type of phone 1 Phone 1 hotline function default is disable Enable ATA will dial the hotline number immediately when you pick up phone Note You need to configure Hotline number in advance See the next row Hotline Number of phone 1 Configure Phone 1 hotline number You can enter IP address or number or digit string and the maximum length is 63 digits For instance IP address 192 168 1 23 or telephone number 0800024365 Delay of phone 1 When you pick up the phone before dialing ATA start to count time until the first digit was dialed Default time is 3 seconds ATA will use Hotline number to dial if configured time was expired The configuration range is 1 to 6 seconds DND Type of phone 1 Configure Phone 1 DND function default is Disable When you set to Enable ATA will response SIP command 486 message Busy status to calling user once an call incoming There are 3 options to configure Disable Always Period DND enable according pre defined time period refer to time setting at next row DND Time of phone 1 This command is to configure DND time period at phone 1 Default is From 0 0 start ti
64. hen Welltech Technology Co Ltd 21 88 2012 1 2 fin WELLTECH ATA Web user guide Field Description called number match Rule number Prefix Setup Added or Replace number Only for numbers and maximum length is 8 digits Rule Define dial number manipulation It allows to enter both numbers and signs x The means Or The x means any numbers which are from 0 to 9 The maximum length is 40 digits NOTE The first digit can t be 0 if it is a 2 digits number Index Index number There are 8 rule data Setup Dial Now dial immediately rule Dial Now Rule Automatic dialing immediately When the dialing rule match the contents in this row the automatic dialing function will be executed without waiting for both press and Auto Dial Time to dial out Both Numbers and symbols can be entered The number length is 80 digits Symbols Only allow to enter and x represents or x any number between 0 to 9 Note The 1st number can not be set to 0 because 0 does not determine the Dial Now standard If the Dial Now is set to Oxxxx because it starts with 0 the system do not follow the dialing rule to dial out Realm 1 prefix Default setting is 1 When you dial 1 called number ATA will switch to the first account and dial out the called number Maximum data length is 7 digits It only allows to enter number and Realm 2 prefix Default setting is
65. hone PRACK Function 9 3 2 Instruction Figure 1 1FXS ATA171plus ATA 171 1FXS 1PSTN ATA 171P 1LFXS 1FXO ATA 171M SIP Advanced Setting SIP Expire Time SIP Expire Time Mode SIP Register Retry Interval SIP T1 SIP T2 SIP Timer B F H SIP Port Range of Phone 1 RTP Port Range of Phone 1 Hold by RFC DTMF Mode RPort Voice QoS Diff Serv SIP QoS Diff Serv Use DNS SRV Send Keep Alives Packet Keep Alives Period Jitter Buffer 60 60 86400 sec O define by Server General General expire time expire time 6 64 5 3600sec 500 ms 4000 ms 32000 ms 10000 10999 1924 40000 20000 21999 1024 40000 Disable vi RFC 2833 Enable 0 63 40 0 63 Disable v Disable x 60 15250 sec 1 0 32 packets SIP Server type Genera w Add URL user phone Register Disable F Add URL user phone Invite Disable v Send SIP PRACK to Proxy Disable v figure1 Field Decription SIP Expire Time Default is 60 The range is 60 86400 secconds When it was set tp 0 ATA define expired time according to SIP Server Data length is 5 digits Default is General Option is General 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 This feature MUST be compatible with SIP Server Calculate method General expire time expire time 30 x6 and this time is SIP Expire Time
66. iod Range 15 250 seconds Jitter Buffer Default is 1 Range 0 32 A jitter buffer temporarily stores arriving voice packets in order to minimize delay variations to improve voice quality SIP Server Type Default is General Option General Asterisk BroadWorks Nortel Xener Vodtel SKTelink Add URL user phone Add URL user phone Invite Send SIP PRACK Default is Disable ATA will put user phone in register header when you set to enable Register Default is Disable ATA will put user phone in Invite header when you set to enable Default is Disable If you need support PRACK please enable Welltech Technology Co Ltd 62 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription of Proxy this function Only Accept Call Default is Disable Configure to accept incoming call which is From Proxy registered to SIP Proxy server Reject incoming call when use IP direct calling Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 63 88 2012 1 2 furw TECH ATA Web user guide 9 4 STUN STUN amp Froce configuration 9 4 1 Function Provide STUN and Force setting 9 4 2 Instruction STUN Setting STUN Active Disable v STUN Server Name stun xten com STUN Port Number 3478 0 65535 Force Active Disable Public IP address a
67. is 20002 20002 define Phone 2 RTP port start and stop Range 1024 40000 NOTE 1 Both fields can be same or a range 2 RTP port was used by two continuous ports If RTP port was entered at 20002 two ports at 20002 and 20003 were used in reality 3 All ports are unique and can not be duplicate Hold by RFC Default is 0 0 0 0 Configure to Hold on a call and define hold message sending method via SIP command When it was Enable Connection Information c IN 1P4 xxx xxx xxx xxx use IP address to set Option Disable Typel Sendoloy Type2 inactvie DTMF Mode Default is RFC 2833 Option InBand RFC2833 SIP Info RFC2833 Inband SIP Info Inband RPort Default is Disable When you set to Enable the Message Header will include Rport information Voice QoS Default is 40 Define Voice QoS Diff Ser function Diff Serv Range 0 63 SIP QoS Default is 40 Define SIP QoS Diff Ser function Diff Serv Range 0 63 Use DNS SRV Default is Disable When you enable the DNS SRV ATA will run DNS Standard query SRV_sip upd xxx xxx xxx Send Keep Alives Packet Default is Disable If ATA was installed behind the NAT it should keep the channel available so it has to send the keep alives packet to keep this channel Enable Use UDP format to send For instance UDP Source Port sip Destination Port xxxx Keep Alives Period Default is 60 seconds Define the Keep Alives sending time per
68. is Disable Define Syslog type or Log message type Option Disable Call Statistics General Debug Call Statistics General Debug SIP Debug Call Statistics SIP Debug General Debug SIP Debug All FXS Port Country Default is USA To select FXS Port impedance of the analog telephone by different country s specification Flash Signal Default is 60 equal 600ms To detect Hook Flash Time at Welltech Technology Co Ltd 73 88 2012 1 2 ATA Web user guide fin WELLTECH Field Decription maximum time When Flash time is less than 600ms it was regarded as HOOK FLASH command When Flash time is longer than 600ms it was regarded as On Hook drop call command Configuration range is from 4 255 Unit 10ms Maximum length is 3 digits Detect Max Default is 7 equal to 70ms When Flash Time is longer than 70ms it will be regarded as FLASH command When Flash Time is less than 70 ms it will be regarded as On Hook Configuration range is from 3 12 Unit 10ms Minimum length is 3 digits Flash Signal Detect Min NET Bandwidth Limit Default is Disable LAN port bandwidth limitation Option Disable 128 256 512 1024 2048 4096 8192 kbps Submit button Save the configuration Reset button Clear the configuration Figure 2 1FXS 1FXO ATA 171M Management Advanced Setting ICMP Not Echo Disable x Send Anonymous CID Disabl
69. le When ICMP was set to Enable ATA doesn t response PING command Option Disable Enable Send Anonymous Default is Disable When ATA was set to Type 1 or Type 2 ATA CID will send out anonymous to SIP Server or to remote party instead of CID Type 1 anonymous anonymous invalid Type 2 anonymous x x x x Your Register Proxy server must support this function Management Default is Enabl which allows web management access from from WAN WAN port When it was set to Disable ATA only allow web access vial LAN port Option Disable Enable Welltech Technology Co Ltd 72 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription Stop Feature Default is Disable This feature is to provide alert tone at the Tone following messages Enable If you enable Subscribe for MWI forward DND function you will hear the alert tone DuDuDu when you pick up the phone Option Disable Enable Billing Signal Default is Disable This feature is to provide start billing signal when call was established Option Disable Polarity Reversal Tone 12K Tone 16K CPC Delay Default is 2 seconds Delay how many seconds to send CPC signal Loop Current Drop signal to Analog telephone set when ATA received drop call signal from IP SIP command Only numbers are accepted data range is 2 5 seconds maximum data length is 1 digit CPC Duration Default is 120ms Setting CPC feature was activated duratio
70. logy Co Ltd 43 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription Off Line Default is Disable The Off Line function will be activate when you set it to enable It provides two options Disable and Enable NOTE Please make sure your DDNS provider supports this feature when you set it to enable Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 44 88 2012 1 2 fin WELLTECH ATA Web user guide 7 3 VLAN 7 3 1 Function Provide Network SIP and RTP VLAN function This feature needs to work with VLAN Router 7 3 2 Instruction VLAN Setting Network Both WAN amp LAN VLAN Packets Disable v VID 802 1Q TAG 136 3 4094 User Priority 802 1P 7 CFI ov SIP amp RTP SIP VID 0 3 4094 0 Disabled SIP User Priority 802 1P ov SIP CFI om RTP VID 0 3 4094 0 Disabled RTP User Priority 802 1P ov SIP CFI ov Field Decription VLAN Packets Default is Disable ATA supports VLAN function accept VLAN packets when you set it to enable VID 802 1Q Default 136 Provide Virtual LAN ID VLAN or VID for VLAN TAG Server Data range 3 4097 Maximum length is 4 digits User Priority Default 0 Set the user s priority Data range 0 to 7 802 1P CFI Default is 0 To set Canonical Format Indicator CFI for one
71. ly be numbers Maximum length 31 digits Authentication ID Account s register ID which can be numbers or strings Maximum length 47 digits Authentication Password Account s register password which can be numbers or strings Maximum length 31 digits Domain Server Enter Domain Server which can be IP Address or Domain Name Format is XXX XXX XXX XXX Maximum length is 63 digits If special Port Address is needed please add it behind For Example nat voiptalk org 5065 Proxy Server Enter Proxy Server information which can be IP Address or Domain Name Format is XXX XXX XXX XXX Maximum length is 63 digits If special Port Address is needed please add it behind For instance nat voiptalk org 5065 Outbound Proxy Enter outbound Proxy Server information which can be IP Address or Domain Name Format is XXX XXX XXX XXX Maximum length is 63 digits If special Port Address is needed please add it behind For instance nat voiptalk org 5065 Subscribe of MWI Subscribe for MWI function message waiting indicator Your Register SIP Proxy server must support this function Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 54 88 2012 1 2 fhiweuacaP ATA Web user guide 9 2 Codec 9 2 1 Function Provide Voice Codec priority RTP payload type and Codec ID setting 9 2 2 Instruction Figure 1
72. me To 0 0 end of time The time format is 24 hours system hh mm Hours Minutes Each field has 2 digits number only Alarm Type of phone 1 Default is Disable Configure Phone 1 alarm function When you set to enable phone 1 will Ring according to pre configured see next row how to configure alarm time alarm time The alarm Ring last for 1 minute To cancel alarm setting simply pickup handset and hand up The default ring time is 1 minute Alarm Time for Default is 0 0 Hour Minute The time format is 24 hours phone 1 system hh mm Each field allows to enter 2 digits number only Submit Save the configuration Reset Clear the configuration Welltech Technology Co Ltd 32 88 2012 1 2 fhiweuacaP ATA Web user guide 6 3 3 Operational Description Example 1 Forward Feature ALL Unconditional Transfer STEP 1 Go to Call Service Setting page and configure Forward Type All Forward Number 812345678 See Figure 1 Forward Number Rings au v 812345678 Phone 1 Figure 1 STEP 2 Route an incoming call to desire routes to dial according to configuration contents of Forward Type and Forward Number BUSY Busy Transfer STEP 1 Go to Call Service Setting page and configure Forward Type Busy Forward Number 405 Rings 3 See Figure 2 Forward Type Forward Number Rings Busy v 405 Phone 1 Figure 2 STEP 2 Route an incoming call to desire routes t
73. n Candence On Default is enable Hi Tone Freq Default 440 Only numerals are acceptable Data range 0 4096 Maximum length 4 bytes Lo Tone Freq Default 350 Only numerals are acceptable Data range 0 4096 Maximum length 4 bytes Hi Tone Gain Default 4522 Only numerals are acceptable Data range 0 65535 Maximum length 5 bytes Lo Tone Gain Default 2261 Only numerals are acceptable Data range 0 65535 Maximum length 5 bytes On Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Congestion Congestion tone configuration Candence On Default is enable Hi Tone Freq Default 440 Only numerals are acceptable Data range O 4096 Maximum length 4 bytes Welltech Technology Co Ltd 81 88 2012 1 2 fin WEL
74. n Loop Current Drop duration data range is 0 120ms maximum length 3 digits IP Dialing Format Default is Type 1 x x x x x Define the IP dialing format Option Disabled Type 1 x x x x x Type 2 X X x xX Send Flash event Default is Disable When you press Flash Key at analog phone set to do Transfer feature ATA will send different event messages to IP side Option Disable Send SIP DSP Content Type applicatio sdp DTMF Event Send RTP event Payload type RTP event Flash SIP Info send SIP Request INFO sip xxx xxxx Encrypt Type Default is Disable Option Disable INFINET AVS WALKERSUN1 WALKERSUN2 CSF1 CSF2 GX VGX RC4 VOS_R VGCP and Welltech VGCP is popular in the market Once this featuare was selected both voice codec and SIP command were encrypted during transmit on IP network Note Your Registered Proxy server must support the same encryption type with ATA Encrypt Key Set encryption password Only VGX encryption format need password Maximum data is 63 digits which can be numbers or strings PPPoE Retry Default is 5 Seconds Set the time for PPPoE to retry when Period PPPoE failed Only numbers are accepted data range 5 255 seconds maximum length is 3 digits System Log Sending ATA debug messages to System Log Server which can Server be IP Address or Domain Name Address Format XXX XXX XXX XXxX Maximum lengthis 63 digits System Log Type Default
75. nable If you enable Subscribe for MWI forward DND function you will hear the alert tone when you pick up the phone Option Disable Enable Billing Signal Default is Disable Option Disable Polarity Reversal Tone 12K Tone 16K CPC Delay Default 2 sec Setting how long it takes for the voltage reaches OV when receiving hang up signal Only numbers are accepted data range 2 5 sec maximum length 1 byte CPC Duration Default 120ms Setting how long it takes for the voltage reaches OV data range 0 120 maximum length 3 bytes IP Dialing Format Default is Type 1 x x x x x Define the IP dialing format Option Disabled Type 1 x x x x x Type 2 X x x x Send Flash event Default is Disable When you press Hook Flash Transfer ATA will send different event Option Disable SIP DSP Content Type applicatio sdp DTMF Event RTP event Payload type RTP event Flash SIP Info SIP Request INFO sip xxx xxxx Encrypt Type Default is Disable Option Disable INFINET AVS WALKERSUN1 WALKERSUNZ2 CSF1 CSF2 GX VGX RC4 VOS_R VGCP and Welltech Your Register Proxy server must support this function Encrypt Key Set encryption password Only support GVX encryption format maximum data 63 bytes PPPoE Retry Default 5 Seconds Set up how long it takes for PPPoE to Period retry when PPPoE failed Only numbers are accepted data range 5 255 maximum len
76. o dial according to configuration contents of Forward Type and Forward Number when ATA is on line Busy NO ANSWER No Answer Forward STEP 1 Go to Call Service Setting page and configure Forward Type No Answer Forward Number 031237788 Rings 3 See Figure 3 Forward Type Forward Number Busy or No Answer Y 031237788 B x Phone 1 Figure 3 STEP 2 Route an incoming call to desire routes to dial according to configuration contents of Forward Type and Forward Number when ATA has received configured Ring cycles and nobody answer this call BUSY or NO ANSWER Busy or No Answer Forward STEP 1 Go to Call Service Setting page and configure Forward Type Busy or No Answer Forward Number 031237788 Rings 3 See Figure 4 Forward Type Forward Number Busy or No Answer 031237788 E x Phone 1 Figure 4 Welltech Technology Co Ltd 33 88 2012 1 2 fhiweuacaP ATA Web user guide STEP 2 Route an incoming call to desire routes to dial out according to configuration contents of Forward Type and Forward Number when ATA has received configured Ring cycles and nobody answer this call or ATA is on line Busy NO ANSWER to PSTN ATA 171M only An SIP IP incoming call was forwarded to FXO port of ATA 171M STEP 1 Go to Call Service Setting page and configure Forward Type No Answer to PSTN Forward Number 0800024365 Rings 1 See Figure 5 Forward Type Forward Number
77. ogy Co Ltd 7 88 2012 1 2 Duwea ATA Web user guide 5 4 2 Function description yatp System Information WAN Port Link Status UP Type DHCP Client IP Address 192 168 50 10 Subnet Mask 255 255 255 0 Gateway Default Gateway 192 168 50 1 DNS Server 1 168 95 192 1 DNS Server 2 168 95 1 1 MAC ID 00 09 f3 77 8e 38 Information E IP Address 192 168 123 1 MAC ID 00 09 f3 77 8e 38 Network NAT SIP Firmware Version 1012090 Update Date 2010 12 16 DSP Version LE 1007290 management System Up Time 0 day s 7 hour s 23 minute s Save and Reboot Network Link Up Time 0 day s 7 hour s 23 minute s Logout Current Time 2010 12 16 18 37 CASE Realm 1 Status Not Registered Number Realm 2 Status Not Registered Number Realm 3 Status Not Registered Number Realm 4 Status Not Registered Number Realm 5 Status Not Registered Number item Description Gateway Device type Gateway ATA or Phone Information Current device information list Phone Phone item provide Phone Book Dial Plan Call Service General setting Volume setting function Network Network setting provide WAN DDNS VLAN VPN PPTP L2TP SNTP time sync function NAT NAT provide LAN setting DMZ amp Mac Clone Virtual Server function SIP SIP provide Service SIP registeration Codec selection Advanced setting STUN STUN amp Fource setting function Management Management item provide Status Log Auto Config Auto
78. one book name first If it mached ATA will follow the phone book name s number setting to dial If NOT the entered number will be dialed out directly 6 1 2 Parameter description Phone Book Setting Page him Index Name O Number Action Delete Delete Delete Delete Delete Delete Delete Delete co ON DOD wo fk U N Delete Delete _ 11 Delete 12 Delete 13 Delete 14 Delete 15 Delete 16 Delete 17 Delete 18 Delete 19 Delete 20 Delete item Description Page Default setting is 1 Select the page from Pagel to Page14 Index Show index number with 140 entries in total from Phone O to 139 Welltech Technology Co Ltd 17 88 2012 1 2 fhiweuaca ATA Web user guide item Description Name It is speed dial number in speed dial mode The name field only supports numeric number only such as 0 9 The maximum length is 31 digits Number Dial TEL Number information Maximum length is 63 digits For example 0212345678 0800024365 or www dyndns info Action provide Delete button to clear this record s data Submit button Save data Reset button Reset whole data 6 1 3 Operate Instruction Example In Phone Book Setting page set Index 0 Name 301 URL 301 192 168 1 2 Index 1 Name
79. onfiguration Reset button Clear the configuration Welltech Technology Co Ltd 59 88 2012 1 2 bu WELLTECH ATA Web user guide Figure 2 2FXS ATA172plus and ATA 172 SIP Advanced Setting SIP Expire Time 60 60 86400 sec O define by Server SIP Expire Time Mode General x General expire time expire time 6 SIP Register Retry Interval 64 5 3600sec SIP T1 500 ms SIP T2 4000 ms SIP Timer B F H 32000 ms SIP Port Range of Phone 1 10000 10999 1924 40000 RTP Port Range of Phone 1 20000 21999 1024 40000 SIP Port Range of Phone 2 11000 12999 1024 40000 RTP Port Range of Phone 2 22000 23999 1024 40000 Hold by RFC Disable x DTMF Mode RFC 2833 v RPort Enable v Voice QoS Diff Serv 40 0 63 SIP QoS Diff Serv 40 0 63 Use DNS SRV Disable Send Keep Alives Packet Disable Keep Alives Period 60 15 250 sec Jitter Buffer 1 0 32 packets SIP Server type General Add URL user phone Register Disable Add URL user phone Invite Disable Send SIP PRACK to Proxy Disable Figure 2 Field Decription SIP Expire Time Default is 60 The range is 60 86400 secconds When it was set tp 0 ATA define expired time according to SIP Server Data length is 5 digits SIP Expire Time Mode Welltech Technology Co Ltd
80. ork environment Provide WAN DDNS VLAN VPN SNTP function setting 7 1 WAN network setting 7 1 1 Function Provide WAN port configuration 7 1 2 Instruction WAN Setting Type IP Address Subnet Mask Default Gateway DNS Type DNS Server1 DNS Server2 MAC ID Host Name PPPoE User Name PPPoE Password PPPoE Service Name PPPoE AC Name PPPoE v Fixed 164 124 101 2 203 248 252 2 VOIP_TA2S Field Decription Type Default is DHCP Client and provides Fixed IP DHCP gains IP Address automatically and PPPoE ADSL Dialing method IP Address Current IP Address list or any IP Address IPv4 format If you would like to change IP Address please set P Type as Fixed IP first Maximum length is 15 digits Subnet Mask Current Subnet list A subnetwork or subnet is a logically visible subdivision of an IP network The format is XXX XXX XXX XXX Maximum length is 15 digits Default Gateway DNS Type digits Current default gateway list Gateway is a node a router on a TCP IP network that serves as an access point to another network The format iS xxx xxx xxx xxx Maximum length is 15 Default is Auto Define DNS server mode to be Fixed and Auto Fixed Manual set DNS server Auto Network server provides DNS It only supports in Type DHCP Client and PPPoE DNS Serverl Default 168 95 192 1 It can be IP address or Domain Name
81. r one byte Data Range is 0 1 Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 46 88 2012 1 2 fhiwes LTECH ATA Web user guide 7 4 VPN PPTP L2TP connection 7 4 1 Function Provide PPTP or L2TP configuration If you want to configure VPN function via webpage please go to LAN port to do it 7 4 2 Instruction VPN Setting Type Disable v Server Name User Name Password il Port Number 1024 65535 Only Support PPTP Field Decription Type Default is Disable Provide PPTP L2TP connection mode Server Name Enter PPTP L2TP Server information which can be IP Address or Domain Name Format is XXX XXX XXX XXX Maximum length is 63 digits User Name Enter PPTP L2TP Server user s name or IP address which can be number or strings Maximum length is 63 digits Password Enter PPTP L2TP password which can be numbers or strings Maximum length is 63 digits Port Number Default PPTP Port is 1723 Prodive 2 options Default Customer User define port and the range is 1024 65535 Only number and length is 5 digits Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 47 88 2012 1 2 fin WELLTECH 7 5 SNTP 7 5 1 Function ATA Web user guide Provide time synchronization and daylight saving function
82. ress or Domain Name Format xxx xxx xxx xxx Maximum length is 63 digits If special Port Address is needed please add it behind For instance nat voiptalk org 5065 Outbound Proxy Enter outbound Proxy Server information which can be IP Address or Domain Name Format is XXX XXX XXX XXX Maximum length is 63 digits If special Port Address is needed please add it behind For instance nat voiptalk org 5065 Subscribe of MWI Subscribe for MWI function message waiting indicator Your Register SIP Proxy server must support this function Submit button Save the configuration Reset button Clear the configuration Figure 2 2FXS ATA172plus or ATA 172 Service Domain Setting Phone No 1 Realm No 15 Active Disable v Display Name Phone Number Authentication ID Authentication Password Domain Server Proxy Server Outbound Proxy Subscribe for MWI Disable v Status Not Registered Figure 2 Field Decription Active Default is Disable This account will be active when you set to enable Display Name Account s display name which can be numbers or strings Welltech Technology Co Ltd 53 88 2012 1 2 fin WELLTECH ATA Web user guide Field Decription Maximum length 31 digits Phone Number Account s phone number which can on
83. s 00982280220 the condition is satisfied with 009 The routing rule will not drop any prefix and then refer to the Routing To setting to select the dialing routes Submit Save the configuration Reset Clear the configuration Figure 3 1FXS 1PSTN ATA 171P device Welltech Technology Co Ltd 23 88 2012 1 2 u WELLTECH ATA Web user guide Dial Plan Setting index Drop prefix Prefix Rule SE 1 Disable Disable Disable A w N Disable Index Dial Now Rule 1 2 3 4 5 6 7 8 Realm 1 prefix 1 Realm 2 prefix 2 Realm 3 prefix my Realm 4 prefix 4 Realm 5 prefix 5 Auto Dial Time 3 sec Use as send key Disable v Auto PSTN backup Disable v PSTN feature code rd Figure 3 Field Decription Index Index number There are 4 entries to configure ADD and Replace dial codes Drop Prefix Default setting is Disable It is also an Add digits feature When it was set to Enable It is also an Replacement digits feature and the number match the Dial Rule number ATA will replace the Rule field numbers and use Prefix field number instead Disable Add prefix number in front of the called number when called number match Rule numb
84. sk 113xxx xxx xxx xxx telephone keypad Use the star key Must set Static IP first when entering a decimal point Set Gateway IP Enter IP address using numbers on the Setting Ad and ILAXXX XXX XXX xxx telephone keypad Use the star key Must set Static IP first when entering a decimal point Set Primary DNS Enter IP address using numbers on the Setting s y H 115XXX XXX XXX XXX telephone keypad Use the star key Must set Static IP first SEYE when entering a decimal point 1 G 711 u Law 2 G 711 a Law 3 G 723 1 4 G729a 5 G726 16K You can set the codec you want to the Setting Ser Codes ee a 6 G 726 24K 7 G 726 32K 8 G 726 first priority 40K Setting Set Handset Gain 131 00 15 Handset Gain from 0 15 Xon can bet us Handset ganto proper value default is 6 Setting Set Handset 1324 00 12 Handset Volume from 0 12 OR aa e A ahs TOE O Volume proper value default is 10 Set Auto Select the auto configuration mode in the Vou cali sek the aute confip taton Setting Configuration 137X X field you can press the following thod t def Hi ff Mode 0 OFF 1 TFTP 2 FTP ee Set Auto Enter IP address using numbers on the Musi set auto confizuration method to Setting Configuration For 135xxx xxx xxx xxx telephone keypad Use the star key TFTP first z TFTP Server when entering a decimal point D Set Auto Enter IP address using numbers on the Must set auto confieirationimethodto Setting Configuration For 136x
85. sword A Confirmed password oT Figure 1 Field Decription New username Enter new username which can be Numbers or strings maximum length is 32 digits New password Enter new password which can be Numbers or strings maximum length is 32 digits Confirmed Enter new password to confirm the password setting assword Welltech Technology Co Ltd 77 88 2012 1 2 Pu WELLTECH ATA Web user guide Field Decription New username Enter new username which can be Numbers or strings maximum length is 32 digits New password Enter new password which can be Numbers or strings maximum length is 32 digits Confirmed password New username New password Enter new password to confirm the password setting Enter new username which can be Numbers or strings maximum length is 32 digits Enter new password which can be Numbers or strings maximum length is 32 digits Confirmed password Enter new password to confirm the password setting Submit button Save the configuration Reset button Clear the configuration Figure 2 System Authority Password Setting New User Name New Password Confirmed Password User New User Name E New Password Confirmed password figure2 Field Decription Welltech Technology Co Ltd 78 88 2012 1 2 Parra AT
86. t length is 63 Rings of phone 1 That feature is used for no answer forward only Default is 3 rings When there is no answer after configured rings ATA forward to pre configured number automatically The configuration ring range is 2 to 8 rings This mode only supports Forward Type No Answer Hotline Type of phone 1 Phone 1 hotline function default is disable Enable ATA will dial the hotline number immediately when you pick up phone Note You need to configure Hotline number in advance See the next row Hotline Number of phone 1 Configure Phone 1 hotline number You can enter IP address or number or digit string and the maximum length is 63 digits For instance IP address 192 168 1 23 or telephone number Welltech Technology Co Ltd 28 88 2012 1 2 faiweuascay ATA Web user guide Field Decription 0800024365 Delay of phone 1 When you pick up the phone before dialing ATA start to count time until the first digit was dialed Default time is 3 seconds ATA will use Hotline number to dial if configured time was expired The configuration range is 1 to 6 seconds DND Type of Configure Phone 1 DND function default is Disable When you phone 1 set to Enable ATA will response SIP command 486 message Busy status to calling user once an call incoming There are 3 options to configure Disable Always Period DND enable according pre defined time period refer to time setting at next
87. table Data range 0 65535 Maximum length 5 bytes Lo Tone Gain Default 2261 Only numerals are acceptable Data range 0O 65535 Maximum length 5 bytes On Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 1 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 2 Default is 0 The unit is 10ms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 2 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes On Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Off Time 3 Default is 0 The unit is 1Oms Only numerals are acceptable Data range 0 999 Maximum length 3 bytes Call Waiting Call waiting tone configuration Candence On Default is enable Hi Tone Freq Default 440 Only numerals are acceptable Data range 0O 4096 Maximum length 4 bytes Lo Tone Freq Default 350 Only numerals are acceptable Data range 0 4096 Maximum length 4 bytes Hi Tone Gain Default 4522 Only numerals are acceptable Data range 0O 65535 Maximum length 5 bytes Lo Tone Gain Default 2261 Only numerals are acceptable Data range Welltech Technology Co Ltd 82 88 2012 1 2 fin WELLTECH ATA Web user guide
88. termine as the Dial Now Rule If the Dial Now is set to 0xxxx the system will not follow the dialing rule to dial out Realm 1 prefix Default setting is 1 When you dial 1 called number ATA will switch to the first account and dial out the called number immediately Maximum length is 7 digits Realm 2 prefix Default setting is 2 When you dial 2 called number ATA will switch to the second account and dial out the called number immediately Maximum length is 7 digits PS If account registers fail it will not be switched Realm 3 prefix Default setting is 3 When you dial 3 called number ATA will switch to the third account and dial out the called number immediately Maximum length is 7 digits PS If account registers fail it will not be switched Realm 4 prefix Default setting is 4 When you dial 4 called number ATA will switch to the fourth account and dial out the called number immediately Maximum length is 7 digits PS If account registers fail it will not be switched Realm 5 prefix Default setting is 5 When you dial 5 called number ATA will switch to the fifth account and dial out the called number immediately Maximum length is 7 digits PS If account registers fail it will not be switched Auto Dial Time Default is 5 seconds The configuration range is 3 to 9 seconds ATA will dial out automatically when user didn t enter any digit within this time Use as send Default is Enable Define
89. the following interfaces for Network telephone interface LED indication and power connector 2 1 Two RJ 45 Network interface These two interfaces support 10 100Mps Fast Ethernet You can connect WAN RJ 45 Fast Ethernet port to the ADSL or Switch and connect the LAN port to your computer 2 2 One or two RJ 11 analog telephone jack and line interfaces You can connect one analog telephone to the terminal adapter and one PSTN line ATA 171P or ATA 171M Or two analog telephone sets at ATA172plus and ATA 172 Or one telephone set at ATA171plus and ATA 171 2 3 LED Indication There are three LED indicators on the ATA to show the Power Register and Off Hook status 3 Software Overview SIP v1 RFC2543 v2 RFC3261 Ring Tone IP TCP UDP RTP RTCP Ring Back Tone IP ICMP ARP RARP SNTP Dial Tone TFTP Client DHCP Client PPPoE Client Busy Tone Telnet HTTP Server Programming Tone DNS Client NAT DHCP Server Phone Function cee ue Speed dial key e G711 64k bit s PCM Phone book e G726 16k 24k 32k 40k bit s ADPCM Flash e G729A 8k bit s CS ACELP e e G 729B adds VAD amp CNG to G 729 IP Assignment G 723 1 e Static IP e DHCP Voice Quality e PPPoE VAD Voice activity detection Security CNG Comfortable noise generator LEC Line echo canceller e HTTP 1 1 basic digest authentication for Web setup Packet Loss Compensation e MDS for SIP authentication RFC2069 RFC 2617 Adaptive Jitter Buff
90. tion For ATA 171M this will Function Attendant Transfer 514 None transfer the call to PSTN from IP must be in PSTN mode to execute this command Info Check WAN IP 126 None IVR will announce the current WAN IP Welltech Technology Co Ltd 5 88 2012 1 2 fin WELLTECH ATA Web user guide Address address of the ATA Check LAN IP IVR will announce the current LAN IP ai Address pee None address of the ATA Info Check IP Type 1214 None IVR will announce if DHCP in enabled or disabled Info Check the Phone 1224 None IVR will announce current in use VoIP Number number A Check Network TVR will announce the current network Info Mask ani None mask of the ATA E Check Gateway IP TVR will announce the current gateway Into Address HLZ None IP address of the ATA Check Primary i g Info DNS Server 1254 None IVR will announce the current setting Setting in the Primary DNS field Check Firmware IVR will announce the version of the me Version sai None firmware running on the ATA Setting Set DHCP client 111 None 10e sytem ell change DHCE Client type Enter IP address using numbers on the F F Setting seratane IE 112XXX XXX XXX XXX telephone keypad Use the star key DHCP Will be disabled anid system will Address f change to the Static IP type when entering a decimal point Enter value using numbers on the Setting Set Network Ma
91. to reboot after press Submit Don t remove Power adaptor at this moment 10 9 2 Instruction Language Setting Choice Language English E Field Decription Choice Language Default is English ATA has to restart after you have changed Web language Option English Chinese Simplified Chinese Submit button Save the configuration Reset button Clear the configuration Welltech Technology Co Ltd 85 88 2012 1 2 furw LLTECH ATA Web user guide 11 Save amp Reboot Save configuration and Reboot ATA 11 1 Function Save Change Save configuration and auto reboot to take effect Reboot System Reboot ATA 11 2 Instruction Save and Reboot Save Change Reboot System Field Decription Save Save configuration and auto reboot Reboot Reboot ATA Welltech Technology Co Ltd 86 88 2012 1 2 fhiwex T CRP ATA Web user guide 12 Logout 12 1 Fuction Logout system and return to login page 12 2 Instruction Logout Are you sure to logout Field Decription Logout Logout system and return to login page Welltech Technology Co Ltd 87 88 2012 1 2 Purwo LTECH ATA Web user guide Welltech Technology Co Ltd 88 88 2012 1 2
92. uide 8 3 Virtual Server 8 3 1 Function Provide 12 sets of Virtual Server 8 3 2 Instruction Virtual Server Setting Ss Enable Protocol ee _ Extranet Port 1 gt O reg i 2 O rew y z 3 o hem J beo 4 O te f 5 o Tew g 6 o tew 7 e 7 o rex J 1 eA l 8e o keg Bo 10 O tew E W l 11 o tew P 12 O Tte p E Field Decription Index Index number to support 12 sets configuration Enable Default is Disable to all sets When setting Enable this function will be started Protocol Default is TCP Protocol option is TCP or UDP Internet Port Define the intranet port Range is 1 65533 Here can define a range of ports or fixed port Extranet Port Define the extranet port Range is 1 65533 Here can define a range of ports or fixed port Server IP Define internet server IP address which can only be IP address and the format is xxx xxx xxx xxx The address range is 15 digits Action Click the delete button to clear the setting Submit button Save the configuration Reset button Clear the configuration NOTE When you define the Internet amp Extranet Ports please avoid from using ATA default ports For example 5060 9999 20000 Welltech Technology Co Ltd 51 88 2012 1 2 Parra ATA Web user guide 9 SIP Setting Provide Service Code Advanced an
93. ure allows you to answer the incoming call when you are on line at another call When you are on line to talk an Du Du sound was heard to remind you there is an incoming call To answer this incoming call simple activate HOLD feature to hold existing call and answer incoming call Ring Timeout Default setting is 60 seconds ATA responses Busy tone SIP command 486 to caller when nobody answer incoming call once configured time was expired The configured timeout option is 20 40 60 80 120 180 and 240 seconds Caller ID Scheme Default is Disable The Caller ID supports the following protocol FSK Bellcore DTMF Caller ID before first Ring CID J apan DTMF Brazil and DTMF Denmark mode Note Your analog telephone set MUST support proper Caller ID mode to show CID number CID Type II T 38 FAX Type II mode to show CID number Default is Disable If ATA has enabled both CID Type II and Call Waiting function ATA will show the incoming call Caller ID when you are on line busy Note Your analog telephone set MUST support proper Caller ID Default is Enable to support T 38 FAX transmission function T 38 Pass through Submit button codec to transmit FAX over T 38 protocol Default codec is G 711 u Law enable to support T 38 FAX pass through ATA only uses codec either G 711 u law or G 711 a law Save the configuration Reset button Clear the configuration Wellt
94. xx xxx xxx xxx telephone keypad Use the star key FTP first z FTP Server when entering a decimal point as Welltech Technology Co Ltd 6 88 2012 1 2 furw LLTECH ATA Web user guide 5 Instruction of Web Environment 5 1 Default setting 5 1 1 Default network setting Netwrok Mode Default NAT Mode WAN Port DHCP Client Mode LAN Port DHCP Server Enable IP Address 192 168 123 1 5 1 2 Web login VoIP Web Login default link http 192 168 123 1 9999 gt Account Login Administrator Login Account root Password test System Login Account system Password test Normal Login Account user Password test 5 2 ATA network connection Please connect PC Ethernet cable to LAN port and set PC to DHCP mode Default IP address is 192 168 123 150 5 3 Login VOI P Web page Provide login system management page User Name l Password Suggested that uses IE7 8 Firefox Google the Chrome browser User Name Input user s name it can be numeral or letters Password Input password it can be numeral or letters Login button Login to the ATA Clear button Clear all informations 5 4 VoIP main setting page 5 4 1 Function instructions Provide below function Information system information Phone phone environment Network network environment NAT local network SIP SIP parameter setting Management enhance setting Save amp Reboot Logout Welltech Technol
95. y Note If you need to setting the Auto Configuration function and using Next Configuration time please open this page and set the Auto Update feature The Next Configuration time will be synchronized in the Next Update time Submit button Save the configuration Reset button Clear the configuration NOTE Firmware updated manually at Auto Provision mode 1 You will hear DuDuDu alert tone from handset when you pickup handset after updated firmware was available If you give up update firmware procedure here you don t hear any alert tone at next time 2 If you want to proceed firmware upgrade procedures dial 190 and hang on handset 3 Pick up Handset again dial 160 to enter firmware upgrade procedures Once ATA enter firmware upgrade procedures it takes about 2 to 3 minutes to complete ATA don t implement any job or function in this period Please don t unplug power adaptor during firmware upgrade procedures in order to prevent from failure Welltech Technology Co Ltd 70 88 2012 1 2 fin WELLTECH ATA Web user guide 10 4 New Firmware 10 4 1 Function The Firmware upgrade only support rom format 10 4 2 Instruction Update System Type ALL ROM wox rom v File Location we Update Reset Field Decription Code Type ALL ROM xxxx rom File Location Update firmware location Data length is 30 digits Update Starting upgra

VoIP ATA series (ATA171plus, ATA172plus, ATA-171, ATA

Contents

Download Pdf Manuals

Related Search

Related Contents