JVC AV-20F704 20" TV
Contents
1. For models AV 24F 704 COLOR TELEVISION AV 20F704 USER S GUIDE AV 14F704 Illustration of AV 24F704 and RM C1256G IMPORTANT NOTE TO THE CUSTOMER In the space below enter the serial number for your television located on the rear of the television cabinet staple your sales receipt or invoice to the inside cover of this guide Keep this user s guide in a convenient place for future reference Keep the carton and original packaging for future use WK Serial Number J3M80301A The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous CAUTION RISK oF PLEC TRIG SHOCK voltage within the product s enclosure that may be of sufficient magni tude to constitute a risk of electric shock CAUTION TO REDUCE THE RISK OF amaoni aih a ELECTRIC SHOCK DO NOT REMOVE Uae eee eet ae eee sah tes spaying COVER OR BACK NO USER SERVICEABLE alert the user to the presence of Important operating and mainte PARTS INSIDE REFER SERVICING TO nance servicing instructions in the literature accompanying the QUALIFIED SERVICE PERSONNEL appliance CAUTION Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment WARNING To PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION2. To PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE IMPORTANT SAFEGUARDS 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS All operating and use instructions should be followed CLEANING Unplug this unit from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning the exterior cabinet only ATTACHMENTS The manufacturer of this unit does not make any recommendations for attachments as they may cause hazards WATER AND MOISTURE Do not use this unit near water For example near a bathtub washbowIl kitchen sink laundry tub in a wet basement or near a swimming pool PORTABLE CART WARNING ACCESSORIES symbol provided by RETAC Do not place this unit on an unstable cart stand tripod bracket or table The unit may fall causing serious injury and serious damage to the unit gt 8A An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn v
3. J GROUNDING CONDUCTORS NEC SECTION ln VA 810 21 S32 lt GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE S2898A oneri e As an ENERGY STAR partner JVC has determined that this product or product model meets the ENERGY STAR guidelines for energy efficiency ENERGY STAR IMPORTANT RECYCLING INFORMATION This product utilizes both a Cathode Ray Tube CRT and other components that contain lead Disposal of these materials may be regulated in your community due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance http www eiae org TABLE OF CONTENTS FEATURES cccceccecceccecceccessecsessessessessesetsetstseee 4 PICTURE ADJUSTMENTS iiaii 19 LOCATION OF CONTROLS ois 5 SOUND ADJUSTMENTS ccccccscsecseseeceeseeeeees 19 REMOTE CONTROL siisi 6 CLOSED CAPTION iinn 20 ANTENNA CATV CONNECTIONS cceecee00e 11 ON OFF TIMER ooien 21 CONNECTION TO OTHER EQUIPMENT 12 SLEEP TIMER button u i 22 SETTING LANGUAGE s in 13 VOR DULONS osiinsa 22 SETTING CLOCK osiin 13 DVD DUO occ eeeeccececcsecsecseseesseseesetsecsetseeseeeees 22 TO MEMORIZE CHANNELS ccccccceeceeseeseeeees 14 TV ICATV SWItCH oooi 20 SETTING V CHIP oiiire 15 VCRIDVD SWitch osiin 20 TV BASIC OPERATION cccccsscssseeseeseeseeseeseeeees 17 TROUBLESHOO
4. Minolta 59 046 079 Mitsubishi 05 028 029 030 053 054 055 amp lt a JI S ojo o DIVIN J I 00 07 or O Multitech 047 027 062 35 036 067 044 064 003 004 005 000 63 003 004 005 Olympic 024 023 44 082 064 094 VCR Search Codes Function 1 Slide the first 2 way selector switch to TV and the other 2 way selector switch to VCR 2 Press the VCR POWER and RETURN buttons Hold for at least three seconds and release 3 Press VCR POWER see if the VCR responds 4 If there was a response press RETURN The operating codes are now set If there was no response repeat Step 3 If you repeat Step 3 a total of 80 times without a response use the manufacturers remote control which came with the VCR 5 Press RETURN to exit O ra lt O L REMOTE CONTROL CONTINUED DVD setup The remote control is programmed with DVD codes for power on power off play stop fast forward rewind previous chapter next chapter tray open close and still oause operation 1 Find the DVD player brand from the list of codes shown below 2 Slide the first 2 way selector switch to TV and the other 2 way selector switch to DVD 3 Press and hold down the DISPLAY button 4 With the DISPLAY button held down enter the first code number listed with the 10 key pad 5 6 Release the DISPLAY button Confirm the operation of the DVD player e If your DVD player does not respon
5. OFF TIMER is set e Power interrupted e Approximately 1 hour has passed after the ON TIMER turns on and no button was pressed See page 21 e TV station experiencing problems or program tuned is not closed captioned Try another channel e Check CATV connection or VHF UHF antenna reposition or rotate antenna e Press C C button to turn on the closed caption decoder Display is not shown in your language Select proper language in the menu options The remote control does not operate other product e Set the 2 way selector switch on the remote control correctly See page 6 e Program remote with a different code e The remote control may not be compatible with your product e Install new batteries The remote control does not operate some features of other product e Program remote with a different code e The remote control may not be able to operate all features of your product 23 SPECIFICATIONS f T NAA A2OF704 AV 14F704_ NN H20V 60HZ S O AC Power Input 120 V 60 Hz AC Power Consumption 125W 105W 80W Picture Tube 24 measured diagonally 20 measured diagonally 14 measured diagonally Audio Power Output Rating 5W 5W 2 5 W 2 5 W 2 5 W 2 5 W Speaker Audio Video Input COMPONENT Input Y Input 1 0Vp p 75 ohm PB PR input 0 7Vp p 75 ohm S Video Input Y Input 1 0Vp p 75 ohm C Input 0 3Vp p 75 ohm Video Input 1 0Vp p 75 ohm Audio Input 8dB 47k ohm Tuner Type 181 Ch
6. Press the CH A or V button repeatedly to select the item you want to adjust BASS 0 HYPER SURROUND FEATURE GETS Ese The HYPER SURROUND feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV s speakers The feature uses gt BASS lt gt TREBLE lt gt BALANCE 4 stereo signals from a TV broadcast or video input TO RETURN TO INITIAL SETTING Press the STANDARD button while the sound adjusting mode appears on the screen gt HYPER SURROUND lt gt STABLE SOUND STABLE SOUND FEATURE When the loud sound is made the stable sound feature automatically lower the sound NOTE The on screen display will disappear 6 seconds after finishing an adjustment The settings can only be adjusted when they are displayed on the TV screen 19 CLOSED CAPTION WHAT IS CLOSED CAPTIONING This television has the capability to decode and display Closed Captioned television programs Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language TO VIEW CLOSED CAPTIONS Press the C C button on the remote control to switch between normal TV and the two Closed Caption Modes Captions and 1 2 of Full Screen Text Captions This Closed Caption Mode will display text on the screen in English or another language Generally Closed Captions in English are transmitted on Captions Channel 1 and Closed
7. damage and will often require extensive work by a qualified technician to restore the unit to its normal operation e If the unit has been dropped or the cabinet has been damaged f When the unit exhibits a distinct change in performance this indicates a need for service REPLACEMENT PARTS When replacement parts are required be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards SAFETY CHECK Upon completion of any service or repairs to this unit ask the service technician to perform safety checks to determine that the unit is in proper operating condition HEAT The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat NOTE TO CATV SYSTEM INSTALLER This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT
8. device is not to be used for a long period of time remove the batteries to prevent damage or injury from possible battery leakage 5 Do not try to recharge batteries not intended to be recharged they can overheat and rupture Follow battery manufacturer s directions 6 When you change the batteries try to complete the task within three minutes If you take longer than three minutes the remote control codes for your Cable Box may have to be reset see page 8 EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER NOTES When there is an obstacle between the TV and the transmitter the transmitter may not operate e When direct sunlight an incandescent lamp fluorescent lamp or any other strong light shines on the Remote sensor of the TV the remote operation may be unstable REMOTE CONTROL CONTINUED REMOTE PROGRAMMING Setting the CATV VCR and DVD Codes You can program your remote to operate your cable box satellite receiver VCR or DVD player by using the instructions and codes listed below If the equipment does not respond to any of the codes listed below or to the code search function use the remote control supplied by the manufacturer Cable Box or Satellite setup The remote control is programmed with CATV and or Satellite codes for power on power off channel up channel down and 10 key operation 1 Find the CATV Satellite brand from the list of codes shown below 2 Slide the 2 way selector switc
9. for CH and VOL buttons 17 ENTER Button Press to enter selected setup 18 VOL Buttons Press the button to increase or the button to decrease the volume level Press to select the desired setting or arrangement during On Screen operations 19 EXIT Button Press to exit the On Screen menu function REMOTE CONTROL REMOTE CONTROL BASICS Before you can operate the remote control you must first install the batteries included See Changing the Batteries on this page above for instructions For an illustration please see page 6 Press the POWER button to turn the television on or off Make sure the TV CATV switch is set to TV Move the switch to CATV only if you need to operate a cable box Slide the VCR DVD selector switch to VCR to control a VCR slide to DVD to control a DVD player Please see pages 8 to 10 for instructions on programming your remote control to operate a Cable box VCR or DVD player Press the CH and CH buttons to scan through the channels Tap the CH or CH button to move through the channels one channel at a time Press VOL or VOL to raise or lower the volume An indicator bar will appear on screen to show you the television volume level The CH and VOL buttons are also used to navigate JVC s on screen menu system You can directly access specific channels using the 10 key pad This remote includes illuminated buttons for key features
10. the AUDIO SELECT button to change to mono sound The noise should be eliminated Press it again to return to the stereo sound DISPLAY button MAIN SOUND STEREO o LISTENING TO SAP SEPARATE AUDIO PROGRAM When the TV is turned on or a channel selection is made make certain the SAP appears on the screen This means that the Separate Audio Program broadcasting is available TO SELECT DESIRED SOUND Press the AUDIO SELECT button to select the desired sound MONO SAP BROADCASTING PER soe PH E E STEREO SAP BROADCASTING SAP SOUND MAIN SOUND a MAIN SAP SOUND MONO MONO Press the DISPLAY button to display the current informations on the screen Press Once STEREO and Separate Audio Program SAP 8 30 AM CLOCK Audio output 18 Press Twice STEREO SAP Press 3 times Channel No Channel label if preset CAPTION CH1 SEL STEREO Closed Caption Clear the current informations PICTURE ADJUSTMENTS You can adjust the settings for color sharpness con Press the VOL p or lt 4 button to adjust the trast brightness tint and component setting PGS d tene nea O o a o CONTRAST COLOR brilliant color Press the CH A or V MENU button until the indicator next to BStOCKSET PICTURE begins to flash ye ERODIO then press the ENTER button E LANGUAGE IDIOMA LANGUE E V CHIP SET A Y ENTER MENU EXIT I E r
11. to select the CAN ENG RATING or CAN FRE step 3 will not appear RATING option V CHIP SET Enter the same password for V CHIP SET 6 Press the VOL p gt or lt 4 x CON confirmation then press the OOM a button to select the desired OFF ENTER button ja rating for the applicable video BCANFRE RATING OFF E CHANGE PASSWORD or TV channel DISPLAY TO SET CONTENTS A V lt gt MENU EXIT 0 9 lt 4 ENTER MENU EXIT Press the EXIT button 15 SETTING V CHIP CONTINUED for U S TV RATING MOVIE RATING VOL lt lt gt VOL P VOL q lt gt VOL gt OFF lt gt TV Y lt gt TV Y7 lt gt TV G lt gt TV PG lt gt TV 14 lt gt Tv mMA OFF lt gt G lt gt PG lt gt PG 13 lt gt R lt gt NC 17 lt gt X TV Y all children TV PG parental guidance G all ages R under 17 years old TV Y7 7 years old and above TV 14 14yearsoldandabove PG parental guidance parental guidance TV G_ childrens program TV MA 17 years old and above PG 13 parental guidance suggested less than 13 years old NC 17 17 years old and above When you select TV Y7 TV PG TV 14 or TV MA press the DISPLAY X adult only button to explain the rating Press the CH A or V button to select the desired rating you want Press the VOL p gt or lt 4 button to select the setting ON or OFF If you want to back to V CHIP SET menu press the MENU button for Canadian CAN ENG RAT
12. unit as they may touch dangerous voltage points or short out parts that could result in fire or electric shock Never spill or spray any type of liquid into the unit OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the unit be sure the antenna or cable system is grounded to provide some protection against voltage surges and built up static charges Section 810 of the National Electrical Code ANSI NFPA 70 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding elec trodes and requirements for the grounding electrode SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the unit c If the unit has been exposed to rain or water d If the unit does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in
13. 02 CH 10 12 Press 0 then remaining 2 digits Example to select channel 12 press O12 CH 13 99 Press the 2 digits in order Example to select channel 36 press CH 100 125 cat Press the 3 digits in order Example to select channel 120 press 120 NOTE If the station being viewed stops broadcasting the TV will automatically shut off after 15 minutes 17 INPUT button Selects the signal input source for the television or Video1 2 3 or Component for video devices like VCR s DVD players or camcorders VIDEO 1 The input source changes as below TV gt VIDEO1 gt VIDEO2 gt VIDEO3 COMPONENT STEREO AND SEPARATE AUDIO PROGRAM SAP The TV is equipped with a feature known as Multi channel TV Sound or MTS MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound MTS also provides an extra channel called the Separate Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes LISTENING TO STEREO SOUND When the TV is turned on or a channel selection is made make certain the STEREO appears on the screen This means that Stereo broadcasting is available You can enjoy stereo sound from the left and right speakers e When Mono broadcasting is received no indication is displayed e If the broadcast signal is not strong enough or clear stereo sound is not available press
14. AUDIO minutes step by holding T4 ENTER MENU EXIT EVOP SET 0 ANAUE down the CH A or CH A Y ENTER MENU EXIT V button Press the CH A or CH V button until the indicator next to WON TIMER 6 Press the CH A or CH owoFF timer ON TIMER begins to flash then 7 F cancer Y button to set the channel press the ENTER button E OFF TIMER then press the VOL gt 2 00AM CANCEL button E OFF TIMER 2 00AM CANCEL A V ENTER MENU EXIT e You can set the channel which is added in the A Y lt gt ENTER MENU EXIT Press the CH A or CH V ON OFF TIMER CH SET UP option button to set the hour then press r DooM Sine the VOL p button CANCEL Press the CH A or CH OENES E OFF TIMER W button to select the E ON TIMER HT 7 30AM CH007 l 2 00AM CANCEL S ET m ode cance 1 oN A Y lt gt ENTER MENU EXIT E OFF TIMER 12 00AM CANCEL A V lt gt ENTER MENU EXIT Press the EXIT button NOTES e You cannot set the ON OFF TIMER when the clock is not set e This TV will automatically turn off approximately 1 hour later after the ON TIMER turns on the TV unless any buttons are pressed e To cancel the ON TIMER function To cancel ON TIMER in step 7 above press the CH A or CH F button to select the CANCEL mode OFF TIMER SETTING This feature allows you to have the TV turn OFF automatically at a predetermin
15. Captions in other languages are transmitted on Captions Channel 2 The Captions will appear in places on the screen where they will least interfere with the picture usually on the bottom of the screen News programs will usually show three line Closed Captions which scroll onto the screen Most other shows provide two or three lined Captions placed near the character who is speaking so the viewer can follow the dialogue Words in italics or underlined describe titles words in foreign languages or words requiring emphasis Words that are sung usually appear enclosed by musical notes Text The Text Closed Caption Mode will usually fill 1 2 of full screen with a programming schedule or other information After selecting a Closed Caption Mode it will stay in effect until it is changed even if the channel is changed If the Captions signal is lost due to a commercial or a break in the signal the Captions will reappear when the signal is received again If the channels are changed the Captions will be delayed approximately 10 seconds For television programs broadcasting with Closed Captions look in your TV guide for the Closed Captions symbol CC e When activating the Closed Captioned Decoder there will be a short delay before the Closed Captioned text appears on the screen e Closed Captioned text is only displayed in locations where it is available e If no caption signal is received no captions will appear but the television
16. DVD to be operated You can operate your VCR or DVD after you have programed the remote control 3 DISPLAY Button Displays the current status time channel or Input the present settings on the TV screen 4 SLEEP TIMER Button Sets the TV to turn off automatically after up to 120 minutes 5 AUDIO SELECT Button Switches sound between mono and stereo and SAP when receiving broad casts in stereo or SAP 6 MUTING Button Press to turn off the sound Press again to turn the sound back on 7 C C Closed Caption Button Switches between Caption Text and TV modes for Closed Captioned programs 8 STANDARD Button Press to reset the On Screen picture adjustments or Audio adjustment to their factory preset positions 9 CH Buttons Press the button to change to a higher numbered channel set into memory Press the button to change to a lower numbered channel set into memory Press to select the desired item during On Screen operations 10 MENU Button Press to display the On Screen menu function 11 VCR or DVD Operation Buttons Press to operate your VCR or DVD 12 POWER Button Press to turn the TV on or off 13 INPUT Button Switches between the TV and external input sources 14 10 key pad Allows direct access to any channel of the TV VCR or Cable box 15 RETURN Button Switches between the present channel and the last channel selected 16 LIGHT Button Press to turn the illumination on
17. F ANGLAGE DIOMA ANGLE English ENGLISH Spanish FRANGAIS button to select the LANGUAGE ATY ENTER MENU EXtT ESPANOL or French A Y ENTER MENU EXIT mode then press the ENTER FRANCAIS then press the button ENTER button Press the EXIT button NOTE If Spanish or French is chosen the Closed Caption indicators will be in the selected language but the Closed Caption text will not be affected by the language selection SETTING CLOCK You must set the time manually for DISPLAY and ON OFF TIMER Press the MENU button Press the CH A or CH F button to set the minute Press the CH A or CH Y button until the indicator next to CLOCK SET begins A to flash then Press the T IDIOMA LANGUE ENTER button BV CHIP SET A Y ENTER MENU EXIT CLOCK SET 10 00 AM 7 N A Y lt 4 gt ENTER MENU EXIT Press the EXIT button Press the CH A or CH NOTES V button to set the hour GLOCK SET e After a power failure or disconnection of the then press the VOL pm T a power plug the time display will be lost In this case set present time again When you set the minute you can change in 10 minutes by holding down the CH A or CH V button button A Y lt 4 P ENTER MENU EXIT 13 TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory ski
18. ING CAN FRE RATING VOL lt lt s VOL p VOL lt lt gt VOL Pb OFF lt gt E lt gt C lt gt 08 lt gt Q lt gt PGA lt 314 lt gt 18 OFF gt E gt G Bans lt gt 13ans lt gt 16ans lt gt 18ans E Exempt E Exempt es C Programming Intended for Children G G n ral C8 Programming Intended for Children 8 and Over 8ans G n ral D conseill aux jeunes enfants G General Audience 13ans Cette mission peut ne pas convenir aux enfants de PG Parental Guidance moins de 13 ans 14 14 Years and Older 16ans Cette mission ne convient pas aux moins de 16 ans 18 Adult 18ans Cette emission est r serv e aux adultes NOTES e If you want to change password follow steps 1 and 2 and select CHANGE PASSWORD option then enter your new password e The V Chip function is activated only on programs and tapes that have the rating signal e Once you block a program using the V Chip function the blocked program cannot be watched based on the content of the show When the program starts the IF YOU CANCEL PROTECT INPUT PASSWORD will appear on the screen When you want to release the V Chip temporarily enter the password If you change the channel or turn off and on the TV while releasing the V Chip temporarily the V Chip setting will be resumed e When you watch the TV from the cable box or the VCR with the RF Modulator then you release the V Chip tempor
19. INT and COMPONENT e Closed Captioned Decoder Displays text captions or 1 2 of full screen text on the screen for hearing impaired viewers e Stereo SAP Reception This TV is designed to receive stereo and separate audio program SAP broadcasts where available e Video Input Jacks This unit is equipped 3 types of video input jacks The component video in jacks and S video in jack enable you to watch the DVD player or the video devices with high quality picture e Remote Control You can operate your VCR Cable Box Satellite Dish and DVD after you have registered the 3 digit codes for their brand name 4 LOCATION OF CONTROLS POWER Button Press to turn the TV on or off Remote Sensor Signals from the Remote Control unit are received here ON TIMER Indicator This indicator lights up when the powered up It also lights up when ON TIMER program is turned ON while power is OFF CHANNEL Buttons Press to select a higher or lower numbered channel set into memory VOLUME Buttons Press to raise or lower the volume of the sound VIDEO 3 IN Jacks Front Audio and video signal cables from an external source can be connected here HEADPHONES JACK Plug an earphone or head phones with an 1 8 miniplug into this jack for listening VHF UHF IN ANT Jack Connect a VHF UHF antenna or CATV cable to this jack 9 10 11 12 Ill
20. Jack on the back of the television For Subscribers to Scrambled Cable TV Service If you subscribe to a cable service which requires the use of a Converter Descrambler box connect the incoming cable to the Converter Descrambler box and connect the output of the box to the Antenna Jack on the back of the television Follow the connections shown left Set the television to the output of the Converter Descrambler box usually channel 3 or 4 and use the Converter Descrambler box to select channels For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a Converter Descrambler box you may wish to use a two set signal splitter sometimes called a two set coupler and an A B Switch box from the cable installer or an electronics supply store Follow the connections shown left With the switch in the B position you can directly tune any nonscrambled channels on your TV With the switch in the A position tune your TV to the output of the Converter Descrambler box usually channel 3 or 4 and use the box to tune scrambled channels 11 CONNECTION TO OTHER EQUIPMENT The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component Check the User s Guide provided with each component for the location of v
21. NT VIDEO audio cables to the AUDIO IN VIDEO 1 jacks on the OUT jacks to the COMPONENT VIDEO IN Y PB PR rear of the TV The S video cable only carries the video jacks on the rear of TV you must also connect the audio signal Audio signal is separate cables to the AUDIO IN VIDEO 2 IN jacks on the rear of the TV Rear of TV Rear of TV VCR AUDIO L t S VIDEO not supplied not supplied not supplied not supplied NOTE When the S video cable and the video cable are e Select COMPONENT by pressing the INPUT button connected to each jack at the same time the S video to display the DVD picture cable takes precedence over the video cable e If you have a DVD without COMPONENT VIDEO OUT jacks connect the video cable to VIDEO IN VIDEO 2 IN jack In this case select VIDEO 2 by pressing the INPUT button to display the DVD picture 12 SETTING LANGUAGE This TV can display the channel number on screen displays and picture adjustments on the screen in English Spanish or French On screen language selection step 3 will automatically appear on the screen when you press the MENU button initially Select the language you prefer first then proceed with the other menu options Press the MENU button MENU Press the CH A or V LANGUAGE IDIOMA LANGUE een button until the gt indicator gt ENGLISH E PICTURE points to the desired language ESPANOL Press the CH A or
22. TING GUIDE 0 ccccccesseseeeeeee 23 INPUT bUttON ccccccccseceessessessesseseeseesecsecseeseeseee 18 SPECIFICATIONS cccccccscssceeseeseesees Back Cover STEREO AND SEPARATE AUDIO PROGRAM SAP oooi 18 DISPLAY Dutton o on 18 FEATURES e Flat Picture Tube It reduces the influence of surrounding light resulting in outstanding image detail and clarity 181 Channel Tuner The tuning system is capable of receiving all 68 VHF UHF standard broadcast channels that are available in your area When operating on a cable system it can tune to the standard VHF channel frequencies plus up to 113 cable channel frequencies The actual number of channels received depends upon channel reception in your area or your cable system e On Screen 3 Language Display Consists of channel sleep timer volume level muting text caption indicators and picture control adjustments These can be displayed in English Spanish or French e ON OFF Timer Allows you to automatically turn on or off your TV at a set time e Sleep Timer Operable from the remote control this TV can be programmed up to 120 minutes to turn off automatically e V Chip The V Chip function can read the rating of a TV program or movie content if the program is encoded with this information The V Chip will allow you to set a restriction level e Picture Control Adjustments The On Screen display allows precise remote control adjustment of BRIGHTNESS COLOR CONTRAST SHARPNESS T
23. a third grounding pin This plug will only fit into a grounding type power outlet This too is a safety feature If you are unable to insert the plug into the outlet contacts your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance 13 14 15 16 17 18 19 20 21 22 23 LIGHTNING To protect your unit during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the unit due to lightning and power line surges POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock OBJECT AND LIQUID ENTRY Do not push objects through any openings in this
24. annel Quartz PLL Frequency Synthesized Receiving Channels VHF 2 13 UHF CATV 66 125 GGG 125 Antenna Input Impedance 75 ohm VHF UHF CATV Coaxial Input Dimensions 26 1 2 W x 19 1 8 D 23 1 4 W x 19 3 4 D 17 1 8 W x 15 1 2 D x 20 1 8 H x 17 1 2 H x 13 5 8 H Weight 72 6 Ibs 55 2 Ibs 26 4 Ibs ACCESSORIES Remote Control Batteries 2 x AA Specifications are subject to change without notice JVC COMPANY OF AMERICA JVC CANADA INC Division of U S JVC CORP 21 Finchdene Square 1700 Valley Road Scarborough Ontario Wayne New Jersey 07470 Canada M1X 1A7 J3M80301A K 03 04 PRINTED IN THAILAND
25. annels CATV CH CHANNEL and buttons Press and release the CH CHANNEL or button The channel automatically stops at the next channel set into memory CH 012 For proper operation before selecting channels they should be set into the TV s memory See TO MEMORIZE CHANNELS RETURN button Returns to the channel viewed just before the channel currently onscreen CH 012 CH 007 MUTING button The MUTING button instantly turns the volume down completely when you press it Press MUTING button and the volume level will instantly go to zero To restore the volume to its previous level press MUTING button again MUTING 10 key pad 0 9 Press these buttons to select a channel The channel number will appear on the upper right corner of the TV screen If an invalid channel number is selected the display will revert to the original channel TV Mode Direct Channel Selection When the TV CATV menu option is in the TV position all channels can be instantly selected by using two buttons For example to select channel 2 press O then 2 If you press only 2 channel selection will be delayed for a few seconds For channels 10 and above press the 2 digits in order CATV Mode Direct Channel Selection When the TV CATV menu option is in the CATV position channels can be selected as follows CH 1 9 Press 0 twice then 1 9 as needed Example to select channel 2 press 0
26. arily the V Chip setting will not be resumed until you turn off the TV The TV channel is not used in this case e When changing the channel with the cable box or the VCR approximately 10 seconds will pass until the program appears e When you dislocated or lost the password you can cancel the existing password by the following procedure Press VOLUME button of main unit Keep pressing VOLUME button of main unit and press 0 key of remote control simultaneously for a few seconds 16 TV BASIC OPERATION Before operate your TV select TV position of the TV CATV switch on the remote to control the TV with the remote To turn on the TV press the POWER button The VOLUME can be adjusted to a desired level by pressing the VOL VOLUME or button Adjust the volume level by pressing the VOLUME or button The volume level will be indicated on the screen by green bar As the volume level increases so do the number of bar If the volume decreases the number of green bar also decreases VOLUME 32 ae The sound level will be indicated on the TV screen by green bars and a number As the sound level in creases so do the number of bars and the number on the screen The same is true for decreasing the level Set the TV CATV menu option to the appropriate position When shipped from the factory this menu option is in the CATV setting See TO MEMORIZE CHANNELS TV VHF UHF channels CABLE TV ch
27. ble in your area A Y ENTER MENU EXIT Press the EXIT button TO ADD DELETE CHANNELS Press the MENU button MENU E CLOCK SET Press the CH A or V button until the indicator nextto FAUDIO AGE IDIOMA LANGUE CHIP SET CH SETUP begins to flash Aare then press the ENTER button Press the CH A or button until the indicator next to ADD DELETE begins to flash then press the ENTER button A Y ENTER MENU EXIT Select the desired channels to be added or deleted using the 10 key pad 0 9 or the CH or button CH SETUP E TVPCATV BAUTO CH MEMORY BADD DELETE 4 ECH LABEL Press the VOL p or lt 4 button to select ADD or DELETE If an unmemorized channel was selected step 4 the channel indication will be red Press the VOL or lt d button if you wish to ADD the unmemorized channel The channel indicator will change from red to green when a channel is added and the channel will be memorized If a memorized channel was selected step 4 the channel indication will be green Press the VOL p gt or lt 4 button if you wish to DELETE the channel from memory The channel indicator will change from green to red when a channel is deleted Repeat Steps 4 and 5 for each channel to be added or deleted 0 9 A V lt gt MENU EXIT 6 Press the EXIT button after adding or deleting all of the desired channels to
28. d to the first code try the others listed If it does not respond to any code try the Search Codes Function as shown below e After you program your remote some DVD buttons may not work properly If some buttons do not work properly use the remote control which came with your DVD player DVD Player CODES DVD Player CODES Jve 000 Sharp OO 038 E Pioneer 022 DVD Player Search Codes Function 1 Slide the first 2 way selector switch to TV and the other 2 way selector switch to DVD 2 Press the DVD POWER and RETURN buttons Hold for at least three seconds and release 3 Press DVD POWER see if the DVD player responds 4 If there was a response press RETURN The operating codes are now set If there was no response repeat Step 3 If you repeat Step 3 a total of 30 times without a response use the manufacturers remote control which came with the DVD player 5 Press RETURN to exit 10 ANTENNA CATV CONNECTIONS T Combination VHF UHF Antenna Single 75 ohm Cable C 300 ohm Twin lead Wire GEO Splitter Take off the Splitter UHF Antenna 300 75 ohm Matching Transformer 300 ohm Twin lead Wire not AT L s 2S VHF Antenna e eee 75 ohm Cable iL scala ohm Twin lead Wire aro Combiner not supplied 300 75 ohm Matching Transformer not supplied Converter Descrambler cH F Converter Descrambler 7 K Splitter A B Switch A6 Incoming CATV Combination VHF UHF An
29. ed time If you program the OFF TIMER once The TV will be automatically turned off at the same time daily Press the MENU button Press the CH A or ON OFF TIMER CH F button to set ON as Press the CH A or CH F MENU the hour then press the CANCEL button until the indicator next to SE2LOCKSET VOL pb button OA OANOEL ON OFF TIMER begins to flash 7854 Setup then press the ENTER button AUDIO A Y lt 4 gt ENTER MENU EXIT E LANGUAGE IDIOMA LANGUE E V CHIP SET A Y ENTER MENU EXIT Press the CH A or CH ON OFF TIMER V button to set the minute ON JME cuore Press the CH A or CH ON OFF TIMER then press the VOL gt CANGE button until the indicator next to K button 1 OFF w a OFF TIMER begins to flash CANDEL e You can change in 10 then press the ENTER button OFF TIMER Ee minutes step by holding ALY s gt ENTER MENU EXIT A Y ENTER MENU EXIT ea j A or CH 7 6 Press the CH A or CH _ ONOFF TIMER V button to select the SET 12 00AM CHO012 d CANCEL eos E OFF TIMER VE ly 11 30PM PANCE A Y a gt ENTER MENU EXIT Press the EXIT button NOTES e If station being viewed stops broadcasting the TV will automatically shut itself off after 15 minutes e To cancel the OFF TIMER function To cancel OFF TIMER in step 7 above press the CH A or CH W button to select the CANCEL mode 21 SLEEP TIMER butto
30. eddish color makes picture clearer makes picture softer at Ji picture for indicate video device TO RETURN TO INITIAL SETTING Press the STANDARD button while the picture adjusting mode appears on the screen except the adjusting compo BRIGHTNESS 0 nent a A V lt 4 MENU EXIT Press the CH A or V button repeatedly to select the item you want to adjust NOTE The on screen display will disappear 6 seconds after finishing an adjustment The settings can only be adjusted when they are displayed on k BRIGHTNESS lt gt CONTRAST lt gt COLOR the TV screen gt COMPONENT lt gt SHARPNESS lt gt TINT SOUND ADJUSTMENTS You can adjust the setting for bass treble balance stable 4 Press the VOL p or lt button to adjust the sound and hyper surround setting e BASS makes the bass sound makes the bass sound stronger weaker makes the treble makes the treble sound Press the MENU button Press the CH A or V END are E CLOCK SET button until the indicator next to ON OFF TIMER AUDIO begins to flash then myicrure E AUDIO 7 BNANGUAGE IDIOMA LANGUE press the ENTER button EN uar A Y ENTER MENU EXIT makes the output level makes the output level BALANCE of right speaker stronger of left speaker stronger STABLE ONI a SOUND STABLE SOUND ON STABLE SOUND OFF HYPER HYPER SURROUND HYPER SURROUND SURROUND ON OFF
31. ess the ENTER button to register case you have a channel to ONSETICLEAR label or change Select ead CLEAR in case you have a channel to delete Then press the ENTER button SETTING V CHIP This TV is fitted with a V CHIP controller which provides you with channel viewing access controls and restrictions This function is to prevent your children from watching violence or sexual scenes that may be harmful fo Press the EXIT button LABEL A Y 4 ENTER MENU EXIT Press the MENU button and are 4 Press the CH A or press the CH A or V Se ee button to select the V CHIP button to select the V CHIP SET a option option then press the ENTER S E ANGUAGE IDIOMA LANGUE Press the VOL b gt or 4 E V CHIP SET button to select the ON A Y 4 MENU EXIT button AN Y ENTER MENU EXIT Enter your password 4 digits V CHIP SET POP AG V CHIP SET Press the CH A or V VEY CHIP using the 10 key pad 0 9 In NEW l E US TV RATING OFF oad PASSWORD re button t lect the US TV RATING 7H MOVIE RATING OFF the event of entering incorrect na utton to select the BCANENG RATING OFF c 5 E CAN FRE RATING OFF password press the VOL lt q or MOVIE RATING option E CHANGE PASSWORD button Then press the ENTER 0 9 4 ENTER MENU EXIT For Canadian A Y lt MENU EXIT button Press the CH A or e After registration of password button
32. h to CATV 3 Press and hold down the DISPLAY button 4 With the DISPLAY button held down enter the first code number listed using the 10 key pad 5 Release the DISPLAY button 6 Confirm the operation of the Cable Box Satellite receiver e If your CATV or Satellite box does not respond to the first code try the others listed If it does not respond to any code try the Search Codes Function as shown below Cable Box CODES Cable Box CODES Macom 049 050 051 054 Ct exscan 44 O50 050 Cable Satellite Search Codes Function 1 Slide the 2 Way Mode Selector switch to CATV 2 Press the TV POWER and RETURN buttons Hold for at least three seconds and release 3 Press TV POWER see if the CATV or Satellite box responds 4 If there was a response press RETURN The operating codes are now set If there was no response repeat Step 3 If you repeat Step 3 a total of 52 times without a response use the remote control which came with the equipment 5 Press RETURN to exit VCR setup The remote control is programmed with VCR codes for power on power off play stop fast forward rewind pause record channel up and channel down operation 1 Find the VCR brand from the list of codes shown below 2 Slide the first 2 way selector switch to TV and the other 2 way selector switch to VCR 3 Press and hold down the DISPLAY button 4 With the DISPLAY button held down enter the first code number listed wi
33. ideo and audio inputs and outputs The connection diagrams in the following are offered as suggestions You may need to modify them to accommodate your particular assortment of components The diagrams are intended to show component video and audio interconnections only Press the INPUT button to select the AV mode to use the TV as a monitor Operate your VCR as usual TV AV SELECTION If you connect the TV to VCR camcorder TV game or DVD you can select by pressing the INPUT button Press the INPUT button repeatedly to select the desired i TV gt VIDEO 1 gt VIDEO 2 VIDEO 1 mode COMPONENT lt VIDEO 3 An indication of input source will display on the screen for 4 seconds 1 To connect the TV to a VCR 3 To connect the TV to a camcorder ex Use VIDEO 1 IN jacks to connect it To playback from the camcorder connect the camcorder to the TV as shown Rear of TV VCR MOER y Front of TV AUDIO ae ae A pa 2 Oo To Audio L R 5 6 6 Video OUT AUDIO R not supplied not supplied e Select VIDEO 1 by pressing the INPUT button to e Select VIDEO 3 by pressing the INPUT button to display the VCR picture display the camcorder picture 2 To connect the TV to a VCR with an S VIDEO jack 4 To connect the TV to a DVD with COMPONENT If you connect a VCR with an S video jack to the S VIDEO OUT Jacks VIDEO jack on the rear of TV you must also connect the If you connect a DVD with the COMPONE
34. like CH buttons and VOL buttons Press the LIGHT button to turn the illumination on CHANGING THE BATTERIES Push down on the remote s back cover and slide towards the bottom to remove it Insert two AA batteries supplied carefully noting the and markings on the batteries and on the remote control To avoid a potential short circuit insert the end first Be sure to use only size AA batteries When batteries are installed slide the cover back into place until it clicks into position e If the remote control acts erratically replace the batteries Typical battery life is six months to one year We recommend using alkaline batteries for longer battery life When you change the batteries try to complete the task within three minutes If you take longer than three minutes the remote control codes for your VCR DVD and or Cable Box may have to be reset pages 8 10 CONTINUED BATTERY PRECAUTIONS The precautions below should be followed when using batteries in this device 1 Use only the size and type of batteries specified 2 Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment Reversed batteries may cause damage to the device To avoid a potential short circuit insert the end first 3 Do not mix different types of batteries together e g Alkaline and Carbon zinc or old batteries with fresh ones 4 f the
35. n The Sleep Timer can turn the TV off for you after you fall To change the sleep timer setting asleep Program it to work in intervals of 10 minutes for Press the SLEEP TIMER button repeatedly until the a total time of up to 120 minutes display turns to desired time SIPER e To cancel the sleep time 120 Press the SLEEP TIMER button repeatedly until the display turns to 0 VCR buttons You can use this remote control to operate the basic Move the selector switch to VCR to operate functions of your VCR These functions include play e The remote is preset with the code 000 to control record rewind fast forward stop pause channel scan JVC brand VCR s For any other manufacturer s brand TV VCR power on and power off VCR please see the code chart and instructions on page 9 DVD buttons You can also use this remote control to operate the basic Move the selector switch to DVD to operate functions of your DVD player These functions include e The remote is preset with the code 000 to control play rewind fast forward stop still pause previous JVC brand DVD players For any other manufacturer s next tray open close power on and power off brand DVD player please see the code chart and instructions on page 10 TV CATV switch Use either the television s own tuner or a cable box to Move the switch to CATV to operate a cable box select channels Set this switch to TV to operate the e See page 8 for information
36. on programming your television s built in tuner remote for cable box operation VCR DVD switch You can control a VCR or DVD player with the buttons Use the VCR DVD selector switch to choose either VCR on the lower part of the remote control or DVD operation e See pages 9 and 10 for information on programming your remote with VCR and DVD operating codes 22 TROUBLESHOOTING GUIDE Before requesting service please refer to the following chart for the symptom and possible solution SYMPTOMS POSSIBLE SOLUTIONS e Make sure the power cord is plugged in e Try another AC outlet e Power is off check fuse or circuit breaker e Unplug unit for an hour then plug it back in e Set the 2 way selector switch on the remote control correctly See page 6 TV does not operate Poor sound or No sound Poor picture or No picture Poor reception on some channels Poor color or no color Picture wobbles or drifts No CATV reception Horizontal or diagonal bars on screen No reception above channel 13 No Remote operation TV shuts off Closed Caption is not activated e Station or CATV experiencing problems tune to another station e Check sound adjustments Volume and Muting e Check for sources of possible interference e Station or CATV experiencing problems tune to another station e Make sure channels are set into memory e Check antenna or CATV connections reorient antenna e Check for sources of po
37. pping over unwanted channels Before selecting channels they must be programmed into the TV s memory In addition to normal VHF and UHF channels this TV can receive up to 113 Cable TV chan nels To use this TV with an antenna set the TV CATV menu option to the TV setting When shipped from the factory this menu option is in the CATV setting TV CATV SELECTION Press the MENU button Press the CH A or V a button until the indicator next to E CLOCK SET CH SETUP begins to flash then press the ENTER button BEN GL AGE IBIONAT ANGLE E V CHIP SET A ENTER MENU EXIT Press the CH A or V button until the indicator next to TV CATV begins to flash A CATV Press the VOL pb or lt 4 ae Co MEMORY button to select the TV or ECH LABEL CATV mode The arrow indicates the selected mode A Y lt gt MENU EXIT Press the EXIT button NOTE Contact your cable company to determine the type of cable system used in your area 14 AUTOMATIC CHANNEL MEMORY Press the MENU button Press the CH A or V button until the indicator next to CH SETUP begins to flash then press the ENTER button AUDIO E LANGUAGE IDIOMA LANGUE E V CHIP SET A Y ENTER MENU EXIT Press the CH A or V button until the indicator next to AUTO CH MEMORY begins to flash then press the ENTER button The TV will begin memorizing all the channels availa
38. return to normal TV viewing TO MEMORIZE CHANNELS CONTINUED CH LABEL You can labal every channel up to 4 characters Channel labels will appear over the channel number display each time you select a channel Select a channel you want to label by pressing 6 Go to step 7 when you select the SET the 10 key pad or CH or button Go to step 9 when you select the CLEAR Now the bar for the first space is flashing Press the Press the MENU button 7 VOL gt or lt 4 button to enter a character in the first oo Press the CH A or W button until the space Press the button gt SET indicator next to CH SETUP MENU repeatedly until the character LABEL begins to flash then press the EANO eR you want appears on the ENTER button P screen Then press the ENTER 4 Y lt 4 ENTER MENU EXIT E AUDIO button E LANGUAGE IDIOMA LANGUE E V CHIP SET A Y ENTER MENU EXIT NOTE Press the CH A or W button until the The ch ill ch low indicator next to CH LABEL APATA E N Cneneae eee begins to flash then press the Ey 4 gt 0 4 gt 9 41 OAC gt ENTER button HAUTO CH MEMORY NMADD DELETE lt gt Z gt SPACE gt gt N A Y ENTER MENU EXIT Repeat step 7 to enter the rest of the characters from second to fourth Press the VOL p or lt button to select SET or CLEAR Select SET in i 9 Pr
39. s VENTILATION SAAGA al 9 10 11 12 Slots and openings in the cabinet back or bottom are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the unit on a bed sofa rug or other similar surface This unit should never be placed near or over a radiator or heat source This unit should not be placed in a built in installations such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to POWER SOURCE This unit should be operated only from the type of power source indicated on the rating plate If you are not sure of the type of power supply to your home consult your appliance dealer or local power company For units intended to operate from battery power or other sources refer to the operating instructions GROUNDING OR POLARIZATION This unit is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug if your unit is equipped with a 3 wire grounding type plug a plug having
40. ssible interference e Check picture control adjustments e Station or CATV experiencing problems tune to another station e Make sure channels are set into memory e Station signal is weak reorient antenna to receive desired station e Check for sources of possible interference e Station or CATV experiencing problems tune to another station e Make sure channels are set into memory e Check picture control adjustments e Check antenna or CATV connections reorient antenna e Check for sources of possible interference e Station or CATV experiencing problems tune to another station e Make sure channels are set into memory e CATV company is scrambling signal e Check antenna orientation e Check all CATV connections e Set TV CATV menu option to the CATV mode e Station or CATV system problems try another station e Check antenna connections reorient antenna e Check for sources of possible interference e Make sure TV CATV menu option is in the appropriate mode e lf using antenna check UHF antenna connections e Batteries are weak dead or inserted incorrectly e Remote is out of range move closer to TV within 15 feet e Make sure Remote is aimed at sensor e Confirm there are no obstructions between the Remote and the TV e Make sure the power cord is plugged in e Set the 2 way selector switch on the remote control correctly See page 6 e No broadcast on station tuned e Sleep Timer is set e ON
41. tenna Single 75 ohm Cable or 300 ohm Twin lead Wire Connect the 75 ohm cable from a combination VHF UHF antenna to the Antenna Jack If your combination antenna has a 300 ohm Twin lead Wire use the 300 75 ohm Matching Transformer not supplied Combination VHF UHF Antenna Separate VHF and UHF 300 ohm Twin leads Connect the UHF Twin lead Wire to a Combiner not supplied Connect the VHF Twin lead to the 300 75 ohm Matching Transformer not supplied Attach the Transformer to the Combiner Attach the Combiner to the Antenna Jack This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box Some cable companies offer premium pay channels in which the signal is scrambled Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company Illustration of AV 24F704 Separate VHF UHF Antennas Connect the 75 ohm Cable from the VHF antenna and the UHF antenna Twin lead to a combiner not supplied Attach the Combiner to the Antenna Jack NOTE If your VHF antenna has a Twin lead Wire use the 300 75 ohm Matching Transformer not supplied then connect the Transformer to the Combiner For Subscribers to Basic Cable TV Service For basic cable service not requiring a Converter Descrambler box connect the CATV 75 ohm Coaxial Cable directly to the Antenna
42. th the 10 key pad 5 Release the DISPLAY button 6 Confirm the operation of the VCR If your VCR does not respond to the first code try the others listed If it does not respond to any code try the Search Codes Function as shown below Some manufacturer s VCR s may not respond to the TV VCR button even if other buttons work properly e To record hold down the REC button on the remote and press PLAY VCRs CODES VCRs CODES Admiral Optimus 028 021 035 064 Aiwa Orion Panasonic Audio Dynamic Penne Bell amp Howell 063 071 Pentax 058 005 045 093 Broksonic 020 026 094 Philco 031 024 027 023 026 020 043 Canon Philips Pioneer Citizen Proscan Craig Quasar Curtis Mathes Radio Shack Daewoo 033 045 058 023 024 031 046 059 060 083 084 085 087 093 Realistic Dimensia Samsung Emerson Samtron 089 Fisher Sansui Sanyo E Scott Go Video Sears Goldstar Shintom Gradiente Sharp Hitachi Signature 2000 003 026 020 052 Q O OQO O N O Ce O N 3 3 059 060 062 067 038 040 047 048 026 02 063 064 065 066 058 000 001 Admiral Aiwa O Audio Dynamic _ Bell amp Howell Broksonic _ _ Canon __ Citizen Craig Curtis Mathes Daewoo Dimensia_ Emerson Fisher _ 035 036 080 088 027 035 Instant Repla Singer Jensen SV 2000 Sylvania 031 023 024 027 Symphonic 027 081 064 003 004 005 Marta 003 004 027 005 Memorex 021 022 023 024 024 027 070
43. ustration of AV 24F 704 VIDEO 1 IN Jacks Rear Audio and video signal cables from an external source ex VCR can be connected here If your video device has S video out jack connect to S video in jack VIDEO 2 IN Jacks Audio and video signal cables from an external source ex DVD can be connected here If you have a DVD with component video out jacks connect to the component video in jacks If you have a video device without the component video out connect to video in jack REAR AUDIO L R VIDEO OUT Jacks Used to output audio and video signals to a TV amplifier or VCR NOTE This video out jack does not output the signal from component video in jacks AC Power Cord Connect to a 120V 60Hz outlet REMOTE CONTROL TV CATV VCR POWER 1Fr 1Fr_ GO OO ZO O O SOOO MUTING VCR CHANNEL VCR DVD Kd PREV NEXT BPI POWER TV VCR OG e REW PLAY FF QI STOP PAUSE II OPEN CLOSE STILL PAUSE RM C 1256G BATTERY INSTALLATION 1 Open the battery compartment cover SL 2 Install two AA batteries Y 3 Replace the battery compartment cover IL 1 TV CATV Switch Used to select the TV or Cable Box to be operated You can operate your cable box after you have programed the remote control 2 VCR DVD switch Used to select the VCR or
44. will remain in the Caption Mode e Misspellings or unusual characters may occasionally appear during Closed Captioning This is normal with Closed Captioning especially with live programs This is because during live programs captions are also entered live These transmissions do not allow time for editing e When Captions are being displayed on screen displays such as volume and MUTING may not be seen or may interfere with Closed Captions e Some cable systems and copy protection systems may interfere with the Closed Captioned signal e If using an indoor antenna or if TV reception is very poor the Closed Caption Decoder may not appear or may appear with strange characters or misspelled words In this case adjust the antenna for better reception or use an outdoor antenna 20 ON OFF TIMER ON TIMER SETTING This feature allows you to have the TV automatically turn ON at predetermined time If you program the ON timer once the timer will turn ON the TV daily at the same time and to the same channel If the power has been turned on at programmed time the channel is changed to a programmed one Press the MENU button Press the CH A or CH 7 gt ue V button to set the 4 ONS an Press the CH A or CH MENU minute then press the VOL CANCEL button until the indicator next to E ZLOCK SET gt button E OFF TIMER el ON OFF TIMER begins to flash e You can change in 10 then press the ENTER button E
Download Pdf Manuals
Related Search